ZH

RU

ES

Laser reflectance method

Laser reflectance method, Total:173 items.

In the international standard classification, Laser reflectance method involves: Optoelectronics. Laser equipment, Road engineering, Radiation protection, Optics and optical measurements, Sugar. Sugar products. Starch, Fibre optic communications, Thermodynamics and temperature measurements, Electronic display devices, Glass, Electronic tubes, Textile fibres, Paper and board, Paints and varnishes, Components and accessories for telecommunications equipment, Optical equipment, Ceramics, Inorganic chemicals, Protective equipment, Radiation measurements, Reinforced plastics, Rubber and plastics products, Air quality, Electricity. Magnetism. Electrical and magnetic measurements, Coals, Construction materials.


Association Francaise de Normalisation, Laser reflectance method

  • NF S10-114*NF EN ISO 13697:2006 Optics and phonotics - Lasers and laser-related equipment - Test methods for specular reflectance and transmittance of optical laser components.
  • NF P98-527:1991 Road traffic signs. Retroreflective coatings. Method of measuring coefficient of retroreflection using A portable retroreflectometer.
  • NF EN ISO 13697:2006 Optique et photonique - Lasers et équipements associés aux lasers - Méthodes d'essai du facteur de réflexion spéculaire et du facteur de transmission des composants optiques laser
  • NF P98-528:1991 Road traffic signs. Retroreflective coatings. Test method for measuring coefficient of retroreflection using a portable retroreflectormeter.
  • NF P98-524:1991 ROAD TRAFFIC SIGNS. RETROREFLECTIVE COATINGS. TEST METHOD FOR MEASURING COEFFICIENT OF RETROREFLECTION.
  • NF EN ISO 11551:2019 Optique et photonique - Lasers et équipements associés aux lasers - Méthode d'essai du facteur d'absorption des composants optiques pour lasers
  • NF C93-805-5-1*NF EN 61290-5-1:2006 Optical amplifier test methods - Part 5-1 : reflectance parameters - Optical spectrum analyser method
  • NF EN ISO 11146-2:2021 Lasers et équipements associés aux lasers - Méthodes d'essai des largeurs du faisceau, angles de divergence et facteurs de limite de diffraction - Partie 2 : faisceaux astigmatiques généraux
  • NF EN 61290-5-1:2006 Amplificateurs optiques - Méthodes d'essais - Partie 5-1 : paramètres de réflectance - Méthode d'analyseur de spectre optique
  • NF EN ISO 11146-1:2021 Lasers et équipements associés aux lasers - Méthodes d'essai des largeurs du faisceau, angles de divergence et facteurs de limite de diffraction - Partie 1 : faisceaux stigmatiques et astigmatiques simples
  • NF EN 2591-605:2003 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 605 : organes optiques - Coefficient de réflexion
  • NF EN 61290-5-2:2004 Amplificateurs optiques - Méthodes d'essai - Partie 5-2 : paramètres du facteur de réflexion - Méthode de l'analyseur de spectre électrique
  • NF C93-805-5-3*NF EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3 : test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser.
  • NF C93-805-5-1:2001 Optical fibre amplifiers - Basic specification - Part 5-1 : test methods for reflectance parameters - Optical spectrum analyser.
  • NF EN 61290-5-3:2002 Amplificateurs à fibres optiques - Spécification de base - Partie 5-3 : méthodes d'essai des paramètres de réflectance - Tolérance de réflectance en utilisant un analyseur de spectre électrique
  • NF C93-593-9*NF EN 61580-9:2002 Methods of measurement for waveguides - Part 9 : reflection coefficient at rectangular waveguide interfaces
  • NF EN IEC 61169-1-4:2020 Connecteurs pour fréquences radioélectriques - Partie 1-4 : méthodes d'essai électriques - Rapport d'ondes stationnaires en tension, affaiblissement de réflexion et coefficient de réflexion

国家市场监督管理总局、中国国家标准化管理委员会, Laser reflectance method

  • GB/T 37412-2019 Lasers and laser-related equipment—Cavity ring-down method for high reflectance measurement
  • GB/T 38248-2019 Evaluation methods of optical radiation safety for household laser display systems
  • GB/T 11313.201-2018 Radio-frequency connectors—Part 201:Electrical test methods—Reflection coefficient and voltage standing wave ratio

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Laser reflectance method

  • GB/T 11297.2-1989 Test method for side direction scattering coefficient of laser rods
  • GB/T 27661-2011 Test methods for single-pass loss coefficient of laser robs
  • GB/T 16850.5-2001 Basic specification for optical fibre amplifier test methods--Part 5: Test methods for reflectance parameters
  • GB/T 21383-2008 Coefficient of initial retroreflected luminance of newly applied pavement marking and test method
  • GB/T 7962.22-1987 Colourless optical glass test methods--Temperature coefficient of refractive index
  • GB/T 42657-2023 Infrared Optical Glass Infrared Refractive Index Temperature Coefficient Test Method Normal Incidence Method
  • GB/T 7962.1-1987 Colourless optical glass test methods--Refractive index and coefficient of dispersion

Danish Standards Foundation, Laser reflectance method

  • DS/EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
  • DS/EN 61290-5-1:2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method
  • DS/EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyzer method
  • DS/EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser

German Institute for Standardization, Laser reflectance method

  • DIN EN ISO 13697:2006-08 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006); German version EN ISO 13697:2006
  • DIN EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006) English version of DIN EN ISO 13697:2006-08
  • DIN EN 61290-5-1:2007-03 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method (IEC 61290-5-1:2006); German version EN 61290-5-1:2006 / Note: DIN EN 61290-5-1 (2001-06) remains valid alongside this standard until 2009-06-01.
  • DIN EN 61290-5-1:2007 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method (IEC 61290-5-1:2006); German version EN 61290-5-1:2006
  • DIN EN 61290-5-2:2004 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method (IEC 61290-5-2:2003); German version EN 61290-5-2:2004
  • DIN EN 61580-9:1997 Methods of measurement for waveguides - Part 9: Reflection coefficient at rectangular waveguide interfaces (IEC 61580-9:1996); German version EN 61580-9:1996
  • DIN EN 61290-5-3:2002-11 Optical fibre amplifiers - Basic specification - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance using an electrical spectrum analyser (IEC 61290-5-3:2002); German version EN 61290-5-3:2002
  • DIN EN 61290-5-2:2004-12 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters - Electrical spectrum analyser method (IEC 61290-5-2:2003); German version EN 61290-5-2:2004
  • DIN EN 61580-9:1997-05 Methods of measurement for waveguides - Part 9: Reflection coefficient at rectangular waveguide interfaces (IEC 61580-9:1996); German version EN 61580-9:1996

Lithuanian Standards Office , Laser reflectance method

  • LST EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006)
  • LST EN 61290-5-1-2006 Optical amplifiers -Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyzer method (IEC 61290-5-1:2006)
  • LST EN 61290-5-2-2004 Optical amplifiers. Test methods. Part 5-2: Reflectance parameters. Electrical spectrum analyser method (IEC 61290-5-2:2003)
  • LST EN 61290-5-3-2003 Optical fibre amplifiers. Basic specification. Part 5-3: Test methods for reflectance parameters. Reflectance tolerance using an electrical spectrum analyzer (IEC 61290-5-3:2002)

RU-GOST R, Laser reflectance method

  • GOST R 59742-2021 Optics and photonics. Lasers and laser-related equipment. Optical elements for laser equipment. Test methods for specular reflectance and regular transmittance
  • GOST 12.1.031-1981 Occupational safety standards system. Lasers. Methods of dosimetrical control of laser radiation
  • GOST R 12.1.031-2010 Occupational safety standards system. Lasers. Methods of dosimetrical control of laser radiation
  • GOST 24714-1981 Lasers. The measurement methods of radiation parameters. General rules
  • GOST 25677-1983 Measuring converter tube for pulse laser radiation. Basic parameters. Methods for measurement
  • GOST EN 208-2014 Occupational safety standards system. Personal eye protection. Eye-protectors against laser radiation for adjustment work on lasers and laser systems. General specifications, test methods, marking
  • GOST 25368-1982 Means for measurement of pulse laser radiation maximum power. Types and main parameters. Measuring methods
  • GOST 8.198-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring pulse laser radiation power and dynamic parameters of laser detectors in the wavelength range of 0,4-10,6 um
  • GOST 8.444-1981 State system of ensuring the uniformity of measurements. Standard instruments for dynamic parameter measurements of puls laser measuring transducers. Methods and means for verification

AENOR, Laser reflectance method

  • UNE-EN ISO 13697:2007 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components (ISO 13697:2006)

Military Standard of the People's Republic of China-General Armament Department, Laser reflectance method

  • GJB 894A-1999 Military laser radiation parameter testing method
  • GJB 9255-2017 Comprehensive aberration detection method for large-aperture laser emission system Hartmann method
  • GJB 8684.16-2015 Pyrotechnic performance test methods Part 16: Determination of laser extinction coefficient
  • GJB 1200.1-1991 Test method for high temperature linear expansion coefficient of conductor materials Laser scanning method
  • GJB 8878-2016 Test method for impulse coupling coefficient between short pulse laser and material Impulse pendulum method

Standard Association of Australia (SAA), Laser reflectance method

  • AS/NZS 1301.515:2017 Methods of test for pulp and paper, Method 515: Measurement of diffuse radiance factor (diffuse reflectance factor) — Indoor daylight conditions (ISO brightness)
  • AS/NZS 1301.510:2016 Methods of test for pulp and paper, Method 510: Measurement of diffuse radiance factor (diffuse reflectance factor)
  • AS/NZS 1301.436s:2005 Methods of test for pulp and paper - Measurement of diffuse reflectance factor
  • AS/NZS 1301.464s:2005 Methods of test for pulp and paper - Equipment for measurement of diffuse reflectance factor
  • AS/NZS 1301.466s:2005 Methods of test for pulp and paper - Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
  • AS/NZS 1301.446s:2005 Methods of test for pulp and paper - Measurement of diffuse blue reflectance factor (brightness) of pulp, paper and paperboard

International Organization for Standardization (ISO), Laser reflectance method

  • ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
  • ISO/CD 6760-2.2 Optics and photonics — Test method for temperature coefficient of refractive index of optical glasses — Part 2: Interferometric method
  • ISO/DIS 6760-2:2014 Optics and photonics — Test method for temperature coefficient of refractive index of optical glasses — Part 2: Interferometric method

British Standards Institution (BSI), Laser reflectance method

  • BS EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components
  • 20/30384001 DC BS ISO 13142. Optics and photonics. Lasers and laser-related equipment. Cavity ring-down method for high-reflectance and high-transmittance measurements
  • BS EN 61290-5-1:2006 Optical amplifiers - Test methods - Reflectance parameters - Optical spectrum analyzer method
  • BS EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser
  • BS 4432-1:1995 Methods for determining optical properties of pulp, paper and board - Measurement of diffuse reflectance factor of paper, board and pulps
  • BS EN 61580-9:1997 Methods of measurement for waveguides. Reflection coefficient at rectangular waveguide interfaces
  • BS ISO 5631-2:2014 Paper and board. Determination of colour by diffuse reflectance. Outdoor daylight conditions (D65/10)
  • BS ISO 5631-2:2015 Paper and board. Determination of colour by diffuse reflectance. Outdoor daylight conditions (D65/10)
  • BS ISO 5631-2:2009 Paper and board. Determination of colour by diffuse reflectance. Outdoor daylight conditions (D65/10°)
  • BS EN 61290-5-2:2004 Optical fibre amplifiers - Basic specification - Test methods for reflectance parameters - Electrical spectrum analyser method
  • BS EN IEC 61169-1-4:2020 Radio-frequency connectors - Electrical test methods. Voltage standing wave ratio, return loss and reflection coefficient
  • BS ISO 7404-5:2009 Methods for the petrographic analysis of coals - Method of determining microscopically the reflectance of vitrinite
  • 17/30363062 DC BS EN 61169-1-4. Radio-frequency connectors. Part 1-4. Electrical test methods. Voltage standing wave ratio, return loss and reflection coefficient. Part 1-4: Electrical test methods- voltage standing wave ratio, return loss and reflection coefficient

American Society for Testing and Materials (ASTM), Laser reflectance method

  • ASTM E1477-98a(2022) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
  • ASTM E810-94(2000) Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
  • ASTM E810-01 Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
  • ASTM E810-03(2013) Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
  • ASTM E810-03 Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
  • ASTM E810-03(2008) Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
  • ASTM E1477-98A(2017)e1 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
  • ASTM E1477-98a(2017) Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
  • ASTM E1331-15(2019) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM C347-57(1983)e1 Method of Test for Reflectivity and Coefficient of Scatter of White Porcelain Enamels
  • ASTM E1331-96 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM E1331-04 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM E1331-09 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM E1331-15 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM E1349-06 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry
  • ASTM E1651-94(1999) Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry
  • ASTM E810-20 Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
  • ASTM E2302-03a(2009) Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer
  • ASTM E1651-94(2004) Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry (Withdrawn 2004)
  • ASTM E2302-03a(2016) Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer
  • ASTM D2798-05 Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal
  • ASTM D1494-22 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • ASTM D1494-17 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • ASTM D7990-21 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding
  • ASTM D7990-15 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding
  • ASTM E1349-06(2018) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
  • ASTM D1494-97(2001)e1 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • ASTM D1494-97(2001) Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • ASTM D1494-12 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
  • ASTM E1349-06(2013) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45deg;:0deg; or 0deg;:45deg;) Geometry
  • ASTM E1331-96(2003) Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
  • ASTM D4323-84(2003) Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
  • ASTM D7708-14 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks

European Committee for Standardization (CEN), Laser reflectance method

  • EN ISO 13697:2006 Optics and photonics - Lasers and laser-related equipment - Test methods for specular reflectance and regular transmittance of optical laser components

CZ-CSN, Laser reflectance method

Jiangsu Provincial Standard of the People's Republic of China, Laser reflectance method

  • DB32/T 4026-2021 Laser flash method for measuring thermal diffusivity of graphene materials

SE-SIS, Laser reflectance method

  • SIS 13 61 04-1962 Method of test for reflectivity and voeffivicnt of scatter of white porcelain enamels

Professional Standard - Traffic, Laser reflectance method

  • JT/T 689-2007 Test method for coefndent of retrorehction of utilizing the coplanar geometry
  • JT/T 691-2007 Test method for coefficient of retroreflected luminance of horizontal coatings

Professional Standard - Electron, Laser reflectance method

  • SJ 20821-2002 Measurements method for coefficient of loss per pass of laser rods
  • SJ 381-1973 Measurement of frequency temperature coefficient of reflex klystrons
  • SJ 377-1973 Measurement of frequency drift coefficient of reflex klystrons
  • SJ 2354.12-1983 Method of measurement for temperature factor of reverse breakdown voltage of PIN and avalanche photodiodes

Canadian General Standards Board (CGSB), Laser reflectance method

International Electrotechnical Commission (IEC), Laser reflectance method

  • IEC 61290-5-1:2006 Optical amplifiers - Test methods - Part 5-1: Reflectance parameters - Optical spectrum analyser method
  • IEC 61290-5-2:2003 Optical amplifiers - Test methods - Part 5-2: Reflectance parameters; Electrical spectrum analyser method
  • IEC 61290-5-3:2002 Optical fibre amplifiers - Basic specifications - Part 5-3: Test methods for reflectance parameters; Reflectance tolerance test method using electrical spectrum analyzer
  • IEC 61580-9:1996 Methods of measurement for waveguides - Part 9: Reflection coefficient at rectangular waveguide interfaces
  • IEC 61290-5-1:2000 Optical fibre amplifiers - Basic specification - Part 5-1: Test methods for reflectance parameters - Optical spectrum analyser
  • IEC 60169-1-1:1987 Radio-frequency connectors. Part 1 : General requirements and measuring methods. Section One: Electrical tests and measuring procedures: Reflection factor
  • IEC 61169-1-4:2020 Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient

Korean Agency for Technology and Standards (KATS), Laser reflectance method

  • KS L 2105-2006 Measuring method of the linear thermal expansioncoefficient for low expansion glass by laser interferometry
  • KS C IEC 61290-5-1-2007(2022) Optical amplifiers-Test methods-Part 5-1:Reflectance parameters -Optical spectrum analyzer method
  • KS C IEC 61290-5-1-2007(2017) Optical amplifiers-Test methods-Part 5-1:Reflectance parameters -Optical spectrum analyzer method
  • KS C IEC 61290-5-3-2003(2018)
  • KS C IEC 61580-9-2005(2020) Methods of measurement for waveguides-Part 9:Reflection coefficient at rectangular waveguide interfaces
  • KS C IEC 61290-5-3:2003 Basic specification for optical amplifier test methods-Part 5-3:Test methods for reflectance parameters-Reflectance tolerance using an electrical spectrum analyser
  • KS C IEC 61290-5-1:2007 Optical amplifiers-Test methods-Part 5-1:Reflectance parameters -Optical spectrum analyzer method
  • KS L 2105-2006(2021) Measuring method of the linear thermal expansioncoefficient for low expansion glass by laser interferometry
  • KS C IEC 61580-9:2005 Methods of measurement for waveguides-Part 9:Reflection coefficient at rectangular waveguide interfaces
  • KS C IEC 60169-1-1:2007 Radio-frequency connectors-Part 1:General requirements and measuring methods-Section One:Electrical tests and measuring procedures:Reflection factor
  • KS C IEC 60169-1-1:2013 Radio-frequency connectors-Part 1:General requirements and measuring methods-Section One:Electrical tests and measuring procedures:Reflection factor
  • KS L 1604-2002 Fine ceramics-Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method

Professional Standard - Medicine, Laser reflectance method

  • YY/T 1537-2017 Performance and test methods of laser positioning system for radiotherapy

ZA-SANS, Laser reflectance method

  • SANS 61290-5-1:2007 Optical amplifiers - Test methods Part 5-1: Reflectance parameters - Optical spectrum analyzer method

NZ-SNZ, Laser reflectance method

  • AS/NZS 1301.520:2016 Methods of test for pulp and paper Part 520: Measurement of diffuse radiance factor (diffuse reflectance factor)-Outdoor daylight conditions (D65 brightness)

Professional Standard - Textile, Laser reflectance method

  • FZ/T 50013-2008 Method for the determination of whiteness of viscose fibres.Diffuse blue reflectance factor

Japanese Industrial Standards Committee (JISC), Laser reflectance method

  • JIS C 6122-5-1:2001 Optical fiber amplifiers -- Test methods -- Part 5-1: Test methods for reflectance parameters -- Optical spectrum analyzer test method
  • JIS R 1689:2011 Determination of thermal diffusivity of fine ceramic films by pulsed light heating thermoreflectance method
  • JIS R 1689:2018 Determination of thermal diffusivity of fine ceramic films by pulsed light heating thermoreflectance method
  • JIS R 3251:1995 Measuring method of the linear thermal expansion coefficient for low expansion glass by laser interferometry

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Laser reflectance method

  • GJB 5384.16-2005 Test methods of performance for pyrotechnic composition Part 16: Determination of laser extinction coefficient

ES-UNE, Laser reflectance method

  • UNE-EN 61290-5-1:2006 Optical amplifiers - Test methods -- Part 5-1: Reflectance parameters - Optical spectrum analyzer method (IEC 61290-5-1:2006). (Endorsed by AENOR in October of 2006.)
  • UNE-EN 61290-5-2:2004 Optical amplifiers - Test methods -- Part 5-2: Reflectance parameters - Electrical spectrum analyser method (Endorsed by AENOR in September of 2004.)
  • UNE-EN 61290-5-3:2002 Optical fibre amplifiers - Basic specification -- Part 5-3: Test methods for reflectance parameters - Reflectance tolerance using an electrical spectrum analyser. (Endorsed by AENOR in October of 2002.)
  • UNE-EN 61580-9:1996 METHODS OF MEASUREMENT FOR WAVEGUIDES. PART 9: REFLECTION COEFFICIENT AT RECTANGULAR WAVEGUIDE INTERFACES. (Endorsed by AENOR in December of 1996.)
  • UNE-EN IEC 61169-1-4:2021 Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient

KR-KS, Laser reflectance method

  • KS B ISO 9358-2023 Optics and optical instruments — Veiling glare of image forming systems — Definitions and methods of measurement

CENELEC - European Committee for Electrotechnical Standardization, Laser reflectance method

  • EN 61290-5-1:2000 Optical Fibre Amplifiers - Basic Specification - Part 5-1: Test Methods for Reflectance Parameters - Optical Spectrum Analyser

BELST, Laser reflectance method

  • STB 8062-2016 System for ensuring uniformity of measurements of the Republic of Belarus. Measures of coefficients of directed transmittance, diffuse and specular reflections, optical density, color coordinates and chromaticity. Methods of verification

International Commission on Illumination (CIE), Laser reflectance method

  • CIE 182-2007 CALIBRATION METHODS AND PHOTOLUMINESCENT STANDARDS FOR TOTAL RADIANCE FACTOR MEASUREMENTS

European Committee for Electrotechnical Standardization(CENELEC), Laser reflectance method

  • EN 61290-5-3:2002 Optical Fibre Amplifiers - Basic Specification Part 5-3: Test Methods for Reflectance Parameters - Reflectance Tolerance Using an Electrical Spectrum Analyser
  • EN 61290-5-1:2006 Optical amplifiers - Test methods Part 5-1: Reflectance parameters - Optical spectrum analyzer method
  • EN 61290-5-2:2004 Optical amplifiers Test methods Part 5-2: Reflectance parameters Electrical spectrum analyser method
  • EN IEC 61169-1-4:2020 Radio-frequency connectors - Part 1-4: Electrical test methods - Voltage standing wave ratio, return loss and reflection coefficient

European Association of Aerospace Industries, Laser reflectance method

  • AECMA PREN 4592-2005 Aerospace series Paints and varnishes Test method for determination of infrared reflectance Edition P 1

American National Standards Institute (ANSI), Laser reflectance method

  • ANSI/TIA/EIA 455-221-2001 Optical Fiber Amplifiers - Basic Specification - Part 5 -1: Test Method for Reflectance Parameters - Optical Spectrum Analyzer
  • ANSI/ASTM D4323:1992 Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
  • ANSI/ASTM D1494:2012 Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

TH-TISI, Laser reflectance method

  • TIS 1353.5-1998 Standard test methods for paper and paper board.part 5: measurement of diffuse reflectance factor

Aerospace, Security and Defence Industries Association of Europe (ASD), Laser reflectance method

  • ASD-STAN PREN 4592-2005 Aerospace series Paints and varnishes Test method for determination of infrared reflectance (Edition P 1)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved