ZH
RU
ES

Electrode + Test + Electrode Material

Electrode + Test + Electrode Material, Total:500 items.

In the international standard classification, Electrode + Test + Electrode Material involves: Inorganic chemicals, Shipbuilding and marine structures in general, Electricity. Magnetism. Electrical and magnetic measurements, Products of non-ferrous metals, Welding, brazing and soldering, Conducting materials, Non-ferrous metals, Geology. Meteorology. Hydrology, Corrosion of metals, Terminology (principles and coordination), Products of the chemical industry, Powder metallurgy, Insulating materials, Electronic tubes, Semiconductor devices, Electrical and electronic testing, Fuel cells, Optoelectronics. Laser equipment, Industrial automation systems, Waxes, bituminous materials and other petroleum products, Ceramics, Magnetic materials, Rubber and plastics products, Analytical chemistry, Electrical accessories, Electromechanical components for electronic and telecommunications equipment, Printed circuits and boards, Medical equipment, Materials for aerospace construction, Galvanic cells and batteries, Iron and steel products, Materials for the reinforcement of composites, Physics. Chemistry, Testing of metals, Production in the chemical industry, Wastes, Mechanical testing, Water quality, Surface treatment and coating, Non-metalliferous minerals, Electronic components in general, Animal feeding stuffs, Fertilizers, Solar energy engineering, Construction materials, Electrical engineering in general, Environmental protection, Resistors, Nuclear energy engineering, Earthworks. Excavations. Foundation construction. Underground works, Insulating fluids, Electronic component assemblies, Burners. Boilers, Wood, sawlogs and sawn timber, Construction industry, Plastics, Energy and heat transfer engineering in general, Soil quality. Pedology, Power transmission and distribution networks.

工业和信息化部, Electrode + Test + Electrode Material

SJ/T 11792-2022 Test method for conductivity of lithium-ion battery electrode materials
SJ/T 11793-2022 Test method for electrochemical properties of lithium-ion battery electrode materials
YS/T 1097-2016 Chromium, zirconium copper wire for electrode materials
YS/T 584-2018 Chromium and zirconium copper rods for electrode materials
SJ/T 11794-2022 Test method for free lithium in lithium-ion battery cathode materials
SJ/T 11795-2022 Test method for magnetic foreign matter content in lithium-ion battery electrode materials
YS/T 1515-2021 Aluminum alloy electrode materials for aluminum-air fuel cells
XB/T 702-2022 Three-electrode system test method for testing the electrochemical properties of rare earth hydrogen storage alloy powder for metal hydride-nickel battery negative electrodes

German Institute for Standardization, Electrode + Test + Electrode Material

DIN 51919:1999 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method; solid materials
DIN 51919:2013-05 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN 51919:2013 Testing of carbonaceous materials - Determination of the electrical resistivity of electrodes according to the current-voltage method - Solid materials
DIN 51932:2010-06 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
DIN EN ISO 5182:2016-11 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016); German version EN ISO 5182:2016
DIN 51932:2010 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
DIN 51932:1998 Testing of carbon materials - Determination of bulk density of cylindrically machined electrodes
DIN VDE 0151:1986 Material and minimum dimensions of earth electrodes with respect to corrosion
DIN EN 61189-5-503:2018-01 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards (IEC 61189-5-503:2017)...
DIN EN ISO 5182:2016 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016); German version EN ISO 5182:2016
DIN IEC/TS 62607-4-1:2018-07*DIN SPEC 42607-4-1:2018-07 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for nano-enabled electrical energy storage - Electrochemical characterisation, 2-electrode cell method (IEC/TS 62607-4-1:2015)
DIN IEC 62088:2002-09 Nuclear instrumentation - Photodiodes for scintillation detectors - Test procedures (IEC 62088:2001)
DIN IEC/TS 62607-4-1:2013 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method (IEC 113/144/CD:2012)
DIN 52188:1979 Testing of wood; determination of ultimate tensile stress parallel to grain
DIN EN 60404-14:2003 Magnetic materials - Part 14: Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method (IEC 60404-14:2002); German version EN 60404-14:2002
DIN EN ISO 5182:2009 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2008);English version of DIN EN ISO 5182:2009-08

Professional Standard-Ships, Electrode + Test + Electrode Material

CB/T 3794-2014 Test methods for the properties of piezoelectric ceramics.Test for electrode joint strength

American Society for Testing and Materials (ASTM), Electrode + Test + Electrode Material

ASTM D6120-97(2002) Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
ASTM D6120-97(2017)e1 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
ASTM D6120-97 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
ASTM D6120-97(2007) Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
ASTM D6120-97(2012) Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
ASTM D5288-97(2004) Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D5288-97 Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D5288-14 Standard Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D5288-21 Standard Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D5288-10 Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM G5-94(2004) Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G5-94(1999)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G5-94 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G5-94(1999) Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G5-14(2021) Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM D1830-99 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM D1830-99(2005) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM G5-14e1 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G5-14 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G5-94(2011)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM G5-13e2 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G5-13 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G59-97e1 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G59-97(2009) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G5-12 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G100-89(2004) Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
ASTM G5-13e1 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G59-97(2003) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G59-97(2020) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G59-97(2014) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM F1277-95 Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM G59-23 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G57-95a(2001) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM G57-95A Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM F1277-02 Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
ASTM D1816-12 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
ASTM D6745-06(2011) Standard Test Method for Linear Thermal Expansion of Electrode Carbons
ASTM D6745-01 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
ASTM D6745-06 Standard Test Method for Linear Thermal Expansion of Electrode Carbons
ASTM D1816-12(2019) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
ASTM D877-00 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-87(1995) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM C1025-91(2005) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM F1113-87(2005)e1 Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
ASTM G57-20 Standard Test Method for Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM F1277-02(2009) Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
ASTM D877-02e1 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-02 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877/D877M-19 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D877-02(2007) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM G57-06(2012) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM F1113-87(2011) Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
ASTM G187-18 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method

Professional Standard - Machinery, Electrode + Test + Electrode Material

JB/T 4281-1999 Welding-materials for resistance welding electrodes and ancillary equipment
JB/T 7704.6-1995 Test method for electroplating solution Determination of polarization curve

Japanese Industrial Standards Committee (JISC), Electrode + Test + Electrode Material

JIS Z 3234:1992 Copper alloys for resistance welding electrode
JIS Z 3234:1999 Copper alloys for resistance welding electrode
JIS Z 3234:2021 Materials for resistance welding electrodes and ancillary equipment
JIS Z 3322:1996 Materials for stainless steel overlay welding with strip electrode
JIS T 0302:2000 Testing method for corrosion resistance of metallic biomaterials by anodic polarization measurement
JIS Z 3322:2002 Materials for stainless steel overlay welding with strip electrode
JIS Z 3322 AMD 1:2009 Materials for stainless steel overlay welding with strip electrode (Amendment 1)

Group Standards of the People's Republic of China, Electrode + Test + Electrode Material

T/QGCML 308-2022 Sodium ion battery anode material
T/QGCML 306-2022 Cathode material for sodium ion battery
T/CEEIA 577-2022 Electrode for iron chromium flow battery technical requirements and test
T/CPCIF 0169-2021 Recycling products from lithium-ion battery wastes— Selected electrode material powder
T/NAIA 0172-2022 Lithium-ion battery silicon carbon anode material
T/CAAMTB 12-2020 Proton exchange membrane fuel cell membrane electrode test method
T/ZZB 2408-2021 Sodium hydroxide as cathode material for lithium batteries
T/QGCML 411-2022 Lithium battery anode material intelligent production line
T/CPCIF 0251-2023 Pitch for lithium ion battery cathode materials
T/QGCML 1765-2023
T/MBJX 0007-2021 Test specification for multipole magnetic rings of permanent magnetic materials
T/FSYY 0048-2021 Waste lithium battery pretreatment products — Cathode material powder
T/CIAPS 0029-2023 Lithium Manganese Iron Phosphate Cathode Materials for Lithium Ion Battery
T/CPCIF 0250-2023 Graphite negative electrode material coke for lithium ion battery
T/GDBIA 06-2023 Specification for safety testing of ternary cathode materials for lithium-ion batteries
T/HEBQIA 197-2023
T/CESA 1054-2018 Test methods for Porous carbons for electrodes of supercapacitors
T/FSYY 0055-2021 Technical specification for recovery of waste lithium batteries — Graphite category anode materials
T/CEEIA 506-2021 Requirements forgreen plant assessment in lithium ion batteries cathode materials industry
T/HEBQIA 094-2022 Technical specifications for the production of graphite anode materials for lithium-ion batteries
T/DZJN 114-2022 Technical specification for recycling waste lithium-ion battery pole piece materials
T/SXMES 14-2022 Evaluation method of surface temperature for metal material fatigue limit test
T/CASME 520-2023 Test method for proton exchange membrane fuel cell coating metal bipolar plate
T/CSTM 01112-2022 Technical specification for recovery of anode materials for lithium ion batteries — Graphite category
T/FSYY 0035-2021 Technical specification for carbon emission reduction process — Lithium-ion battery cathode material
T/SPSTS 004-2018 Technical specification for recovery of anode materials for lithium-ion batteries—Graphite category
T/ZJCX 0034-2023 Test standard of graphite bipolar plate characteristics for proton exchange membrane fuel cell
T/CSTM 00461-2022 Test method for electrode peel strength of crystalline silicon PV cells
T/DZJN 74-2022 Evaluation Requirements for Green Factory of Lithium-ion Battery Anode Material Enterprises
T/QGCML 654-2023 Special iron for cathode material of lithium iron phosphate new energy power battery
T/DZJN 184-2023
T/SQIA 058-2023 Technical requirements for carbon footprint assessment of lithium battery cathode and anode functional materials
T/DZJN 119-2022 Technical specifications for the recycling of waste lithium-ion battery carbon anode materials
T/CIAPS 0027-2023 Implementation guide for energy efficiency benchmarking of battery industry Part4：Anode materials
T/CIAPS 0026-2023 Implementation guide for energy efficiency benchmarking of battery industry Part3：Cathode materials
T/FSYY 0027-2021 Requirements of the carbon footprint accounting and reporting — Lithium ion battery cathode material
T/FSYY 0036-2021 Technical specification for carbon emission reduction process — Lithium-ion battery cathode material precursor
T/CADBM 21-2019 Test method for limit emission rate of organic pollutants in decoration materials

Professional Standard - Non-ferrous Metal, Electrode + Test + Electrode Material

YS/T 584-2006 Chromium bronzes and zirconium bronzes bars and rods for electrode material
YS/T 63.2-2006 Carbonaceous materials used in the production of aluminium-Part 2: Cathode blocks and prebaked anodes-Determination of electrical resistivity at ambient temperature

Professional Standard - Ocean, Electrode + Test + Electrode Material

HY/T 192-2015 Test method of potentiodynamic polarization resistance of metallic materials in seawater

European Committee for Standardization (CEN), Electrode + Test + Electrode Material

EN ISO 5182:2009 Resistance welding - Materials for electrodes and ancillary equipment
EN ISO 5182:2016 Resistance welding - Materials for electrodes and ancillary equipment
EN ISO 14343:2017 Welding consumables - Wire electrodes@ strip electrodes@ wires and rods for arc welding of stainless and heat resisting steels - Classification
prEN 50114-1993 Materials and size requirements for earth electrodes from the corrosion point of view

Danish Standards Foundation, Electrode + Test + Electrode Material

DS/EN ISO 5182:2009 Resistance welding - Materials for electrodes and ancillary equipment
DS/EN ISO 14372:2011 Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
DS/EN 22401:1994 Covered electrodes-Determination of the efficiency,metal recovery and deposition coefficient

Association Francaise de Normalisation, Electrode + Test + Electrode Material

NF A82-100*NF EN ISO 5182:2016 Resistance welding - Materials for electrodes and ancillary equipment
NF EN ISO 5182:2016 Soudage par résistance - Matériaux pour électrodes et équipements annexes
NF A82-100:2009 Resistance welding - Materials for electrodes and ancillary equipment.
NF A82-100:1987 Electric resistance welding. Materials for resistance welding electrodes and ancillary equipments.
NF T20-173*NF ISO 8006:1986 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Determination of ash.
NF T20-171*NF ISO 6998:1986 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Determination of coking value.
NF T20-172*NF ISO 8003:1986 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Measurement of dynamic viscosity.
NF T20-165:1986 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Sampling.
NF T20-180*NF ISO 6375:1986 Carbonaceous materials for the production of aluminium. Cokes for electrodes. Sampling.
NF EN 61189-5-503:2017 Méthodes d'essai pour les matériaux électriques, les cartes imprimées et autres structures d'interconnexion et ensembles - Partie 5-503 : méthodes d'essai générales pour les matériaux et les assemblages - Essais des filaments anodiques condu...
NF C96-050-10*NF EN 62047-10:2012 Semiconductor devices - Micro-electromechanical devices - Part 10: micro-pillar compression test for MEMS materials
NF C93-735-503*NF EN 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503 : general test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards
NF T20-170*NF ISO 6999:1986 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Determination of density. Pyknometric method.
NF T90-008:1953 WATER TESTING. ELECTROMETRIC MEASUREMENT OF PH WITH THE GLASS ELECTRODE.
NF T20-167*NF ISO 5940:1986 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Determination of softening point by the ring-ball method.
NF T20-168*NF ISO 6376:1986 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Determination of content of toluene-insoluble material.
NF T20-169*NF ISO 6791:1986 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Determination of content of quinoleine-insoluble material.
NF EN 60512-5-1:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 5-1 : essais de courant limite : Essai 5a : échauffement
NF A81-343:2012 Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat resisting steels - Classification.

Korean Agency for Technology and Standards (KATS), Electrode + Test + Electrode Material

KS D ISO 5182:2021 Resistance Welding — Materials for electrodes and ancillary equipment
KS B ISO 24598:2008 Welding consumables-Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels-Classification
KS M ISO 11713:2004 Carbonaceous materials used in the production of aluminium-Cathode blocks and baked anodes-Determination of electrical resistivity at ambient temperature
KS M ISO 11713:2013 Carbonaceous materials used in the production of aluminium－Cathode blocks and baked anodes－Determination of electrical resistivity at ambient temperature
KS M ISO 11713-2004(2009) Carbonaceous materials used in the production of aluminium－Cathode blocks and baked anodes－Determination of electrical resistivity at ambient temperature
KS D 7027-1980 Materials for stainless-steel overlay welding with strip electrode
KS L 9103-1996 Testing method for solderberg paste
KS C ISO 5182:2008 Welding－Materials for resistance welding electrodes and ancillary equipment
KS C ISO 5182-2001(2006) Welding－Materials for resistance welding electrodes and ancillary equipment
KS B 0891-1974 Method of test for fillet weld of covered electrode
KS M ISO 6375:2003 Carbonaceous materials for the production of aluminium-Cokes for electrodes-Sampling
KS M ISO 6375:2013 Carbonaceous materials for the production of aluminium－Cokes for electrodes－Sampling
KS M ISO 8006:2003 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of ash
KS M ISO 6998:2003 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of coking value
KS M ISO 6998:2013 Carbonaceous materials for the production of aluminium－Pitch for electrodes－Determination of coking value
KS M ISO 8006:2013 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of ash
KS M ISO 8006-2003(2008) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of ash
KS M ISO 6998-2003(2008) Carbonaceous materials for the production of aluminium－Pitch for electrodes－Determination of coking value
KS M ISO 6257:2003 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Sampling
KS M ISO 6375-2003(2008) Carbonaceous materials for the production of aluminium－Cokes for electrodes－Sampling
KS M ISO 6257:2013 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Sampling
KS M ISO 6257-2003(2008) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Sampling
KS M ISO 6999:2003 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of density-Pyknometric method
KS M ISO 10143-2004(2019) Carbonaceous materials for the production of aluminium－Calcined coke for electrodes－Determination of the electrical resistivity of granules
KS B ISO 14372:2014 Welding consumables — Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
KS B ISO 14372:2004 Welding consumables-Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen
KS M ISO 8003:2003 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Measurement of dynamic viscosity
KS M ISO 9055:2004 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of sulfur content by the bomb method
KS M ISO 9055-2004(2009) Carbonaceous materials for the production of aluminium－Pitch for electrodes－Determination of sulfur content by the bomb method
KS M ISO 9055:2013 Carbonaceous materials for the production of aluminium－Pitch for electrodes－Determination of sulfur content by the bomb method
KS M ISO 8003:2013 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Measurement of dynamic viscosity
KS M ISO 8003-2003(2008) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Measurement of dynamic viscosity
KS M ISO 10143:2004 Carbonaceous materials for the production of aluminium－Calcined coke for electrodes－Determination of the electrical resistivity of granules
KS C IEC TS 62607-4-1:2019 Nanomaunfacturing — Key control characteristics — Part 4-1:Cathode nanomaterials for nano-enabled electrical energy storage — Electrochemical characterization, 2-electrode cell methods
KS M ISO 12977:2004 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of volatile matter content
KS M ISO 10238-2004(2009) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of sulfur content by an instrumental method
KS M ISO 12977-2004(2019) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of volatile matter content
KS B ISO 18276:2006 Welding consumables-Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels-Classification
KS B ISO 18276:2016 Welding consumables－Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels－Classification
KS C 6050-1985(2000) MEASURING METHODS FOR BIPOLAR DIGITAL INTEGRATED CIRCUITS
KS C 6050-1985 MEASURING METHODS FOR BIPOLAR DIGITAL INTEGRATED CIRCUITS
KS M ISO 6376:2003 Carbonaceous materials for the production of aluminium－Pitch for electrodes－Determination of content of toluene-insoluble material
KS M ISO 6791:2007 Determination of quinoline－insoluble(QI) material of pitch
KS M ISO 5940:2003 Carbonaceous materials for the production of aluminium－Pitch for electrodes－Determination of softening point by the ring-and-ball method
KS M ISO 6791:2017 Determination of quinoline-insoluble(QI) material of pitch
KS C 6991-2013 TEST METHODS OF PHOTODIODES FOR FIBER OPTIC TRANSMISSION
KS B 0892-1971 Method of deposition rate measurement
KS F 2736-2015 Testing method for polarization resistance of reinforcing bar in concrete
KS M ISO 5939:2013 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of water content-Azeotropic distillation (Dean and Stark) method
KS M ISO 5939-2003(2008) Carbonaceous materials for the production of aluminium－Pitch for electrodes－Determination of water content－Azeotropic distillation (Dean and Stark) method
KS C 2712-2001 Test methods of negative temperature coefficient thermistor
KS C IEC TS 62607-4-5:2019 Nanomanufacturing — Key control characteristics — Part 4-5:Cathode nanomaterials for nano-enabled electrical energy storage — Electrochemical characterization, 3-electrode cell method
KS M ISO 10238:2004 Carbonaceous materials used in the production of aluminium-Pitch for electrodes-Determination of sulfur content by an instrumental method
KS M ISO 10238:2013 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of sulfur content by an instrumental method
KS B ISO 18274:2004 Welding consumables-Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys-Classification
KS B ISO 18274:2014 Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification
KS M ISO 12979-2004(2019) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of C/H ratio in the quinoline-insoluble fraction
KS M ISO 6999-2003(2018)
KS B ISO 18273:2004 Welding consumables-Wire electrodes, wires and rods for welding of aluminium and aluminium alloys-Classification
KS B ISO 18273:2016 Welding consumables－Wire electrodes, wires and rods for welding of aluminium and aluminium alloys－Classification
KS M 1077-2008 Determination of lead and cadmium in anode N substance for lithium cell
KS M ISO 12979:2004 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of C/H ratio in the quinoline-insoluble fraction
KS M ISO 10236-2004(2019) Carbonaceous materials for the production of aluminium－Green coke and calcined coke for electrodes－Determination of bulk density(tapped)
KS B ISO 14343:2009 Welding consumables-Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels-Classification
KS L 1640-2021 Test methods for polarization of ceramic-based electrochemical cell by current interrupt technique

KR-KS, Electrode + Test + Electrode Material

KS D ISO 5182-2021 Resistance Welding — Materials for electrodes and ancillary equipment
KS M ISO 6999-2003(2023)
KS C IEC TS 62607-4-1-2019 Nanomaunfacturing — Key control characteristics — Part 4-1:Cathode nanomaterials for nano-enabled electrical energy storage — Electrochemical characterization, 2-electrode cell methods
KS C IEC TS 62607-4-5-2019 Nanomanufacturing — Key control characteristics — Part 4-5:Cathode nanomaterials for nano-enabled electrical energy storage — Electrochemical characterization, 3-electrode cell method
KS M ISO 6376-2003(2023)

ES-UNE, Electrode + Test + Electrode Material

UNE-EN ISO 5182:2017 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016)

British Standards Institution (BSI), Electrode + Test + Electrode Material

BS 6043-3.2:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of density of cathode blocks and prebaked anodes
BS 6043-3.6:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature
BS 6043-3.1.2:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of anodes
BS 6043-3.1.1:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of cathodes
BS ISO 22731:2020 Carbonaceous materials used in the production of aluminium. Cathode. Cathode abrasion testing
BS 4577:1970 Specification for materials for resistance welding electrodes and ancillary equipment
20/30371168 DC BS ISO 22731. Carbonaceous materials used in the production of aluminium. Cathode. Cathode abrasion testing
BS EN ISO 5182:2016 Tracked Changes. Resistance welding. Materials for electrodes and ancillary equipment
BS 6043-3.3:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the bulk density (apparent density) of cathode blocks and prebaked anodes using a dimensions method
BS EN IEC 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - General test method for materials and assemblies. Conductive anodic filaments (CAF) testing of circuit boards
BS 6043-2.1:1985 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling
BS PD IEC/TS 62607-4-1:2015 Nanomanufacturing. Key control characteristics. Cathode nanomaterials for nano-enabled electrical energy storage. Electrochemical characterisation, 2-electrode cell method
PD IEC/TS 62607-4-1:2015 Nanomanufacturing. Key control characteristics. Cathode nanomaterials for nano-enabled electrical energy storage. Electrochemical characterisation, 2-electrode cell method
PD IEC/TS 62607-4-5:2017 Nanomanufacturing. Key control characteristics. Cathode nanomaterials for nano-enabled electrical energy storage. Electrochemical characterization, 3-electrode cell method
BS ISO 10143:2014 Carbonaceous materials for the production of aluminium. Calcined coke for electrodes. Determination of the electrical resistivity of granules
BS 6043-2-18:2001 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of total sulfur by the Eschka method
BS 6043-1.8:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of ash
BS ISO 5940-1:2019 Carbonaceous materials for the production of aluminium. Pitch for electrodes - Determination of softening point by the ring-and-ball method
BS 6043-1.13:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulfur content
BS IEC 60747-5-8:2019 Semiconductor devices. Optoelectronic devices. Light emitting diodes. Test method of optoelectronic efficiencies of light emitting diodes
BS 6043-2.9:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrode coke - Determination of particle size distribution
PD IEC/TS 62916:2017 Photovoltaic modules. Bypass diode electrostatic discharge susceptibility testing
BS 6043-3.8.1:2001 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Carboxy reactivity of prebaked anodes. Determination of the reactivity by a loss in mass method
BS ISO 10143:2019 Tracked Changes. Carbonaceous materials for the production of aluminium. Calcined coke for electrodes. Determination of the electrical resistivity of granules
BS 6043-1.9:1989 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulphur content (bomb method)
BS 6043-2.11:1995 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matter content
BS 6043-3.5.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of flexural strength - Three point method
BS 6043-3.4:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture - Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method
BS 6043-2.16:1998 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of water content of calcined coke
BS 6043-1.1:2002 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Sampling. Section 1.1: Sampling
BS 6043-3.9.1:2002 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Chemical reactivity to air of prebaked anodes. Determination of the reactivity by a loss in mass method
BS IEC 60747-5-11:2019 Semiconductor devices. Optoelectronic devices. Light emitting diodes. Test method of radiative and nonradiative currents of light emitting diodes
BS IEC 60747-5-16:2023 Semiconductor devices - Optoelectronic devices. Light emitting diodes. Test method of the flat-band voltage of GaN-based light emitting diodes based on the photocurrent spectroscopy
BS 6043-1.4:1981 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of toluene-insoluble material
BS 6043-1.5:1983 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of quinoline-insoluble material
BS EN 62047-14:2012 Semiconductor devices. Micro-electromechanical devices. Forming limit measuring method of metallic film materials
BS EN 60404-14:2002 Magnetic materials. Methods of measurement of the magnetic dipole moment of a ferromagnetic material specimen by the withdrawal or rotation method
BS EN ISO 14343:2009 Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification
BS 6043-1.2:1981 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of water content (Dean and Stark method)
BS 6043-2.4:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Analysis by X-ray fluorescence spectroscopy
BS 6043-1.6:1998 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of coking value. Section 1.6 Determination of coking value
BS ISO 5940-2:2007 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of the softening point (Mettler softening point method)
BS 6043-2.6:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the density in xylene of calcined cokes
BS 6043-2.8:1987 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of oil content by solvent extraction of calcined coke
BS 6043-2.13:1996 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of tapped bulk density of green and calcined coke
BS EN ISO 16866:2022 Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)

PL-PKN, Electrode + Test + Electrode Material

PN C97014-1969 Raw materials for elecfrode industry Pilch coke
PN T06516-1990 ?on — selective elektrodes General re?uirements and tests
PN T80006-1988 Electronic components Aluminium electrolytic polar capacitors General requirements and tests
PN C82055-21-1992 Test methods of pressed carbon products Determination of resistivity on electrodes
PN M69161-1990 Welding Insulated electrode hold?rs for manua? welding Re?uirements and tests
PN C04576-10-1986 Water and waste water Tests for nitrogen Determination of nitrate nitrogen by potentiometric method with ion selective electrode

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Electrode + Test + Electrode Material

GB/T 43092-2023 High-temperature performance test method for electrochemical performance testing of lithium-ion battery cathode materials
GB/T 3789.2-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of current of anode and grid
GB/T 24533-2009 Graphite negative electrode materials for lithium ion battery
GB/T 24533-2019(英文版) Graphite negative electrode materials for lithium ion battery
GB/T 7274-2015 Methods for the measurement of direct inter-electrode capacitances of electronic tubes and valves
GB/T 7274-1987 Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
GB/T 26295-2010 Carbonaceous materials used in the production of aluminium.Prebaked anodes and cathode blocks.Determination of flexural strength by the four-point method
GB/T 20042.5-2009 Proton exchange membrane fuel cell.Part 5:Test method for membrane electrode assembly
GB/Z 27753-2011 Test method for adaptability to operating conditions of membrane electrode assembly used in PEM fuel cells
GB/T 30835-2014 Lithium iron phosphate-carbon composite cathode materials for lithium ion battery
GB/T 41760-2022 Test method for spontaneous polarization of tourmaline
GB/T 13083-2002 Determination of fluorine in feed--Ion selective electrode method
GB/T 30836-2014 Lithium titanium oxide and its carbon composite anode materials for lithium ion battery
GB/T 3789.3-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of cathode emission current
GB/T 3789.4-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of reverse grids current
GB/T 3789.5-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid thermo-emission current
GB/T 3789.20-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No1 current cut-off voltage
GB/T 23729-2009 Photodiodes for scintillation detectors.Test procedures
GB/T 3789.11-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No3 cut-off voltage
GB/T 3789.10-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No1 cut-off voltage
GB/T 3789.12-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of interelectrode insulation
GB/T 20042.6-2011 Proton exchange membrane fuel cell.Part 6: Test method of bipolar plate properties
GB/T 32954-2016 Determination of fluoride content for fertilizers.Ion selective electrode method
GB/T 3789.8-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of maximum anode dissipation power and anode overload dissipation power
GB/T 24488-2009 Test method for electrochemical properties of magnesium alloys sacrificial anode
GB/T 3789.7-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of anode ion current
GB/T 3789.18-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of high frequency loss for interelectrode insulators
GB/T 41704-2022 Test methods of cathode materials for lithium ion battery—Determination of magnetic impurities content and residual alkali content

SE-SIS, Electrode + Test + Electrode Material

SIS SS-ISO 5182:1983 Materials for resistance welding elec- trodes and ancillary equipment
SIS SS-ISO 5182:1992 Welding materials for resistance welding electrodes and ancillary equipment
SIS SS 06 10 61-1986 Welding electrodes — Filler material for are welding of stainless steel — Weld metat test pieces
SIS SS 06 05 31-1988 Filter material — Wire electrodes for submerged arc welding — Dimensions and tolerances
SIS SS 06 11 01-1990 Welding electrodes — Wire electrodes and tubular wires for gas metal arc welding and metal arc welding of carbon steel, carbon-manganese alloyed steel, microalloyed steel and low-alloyed steel — Weld metal test specimens for all-weld-metal tests
SIS SS 436 01 13-1981 Poles of laminated wood for overhead power lines — Design and testing
SIS SS 06 11 02-1990 Welding electrodes — Wire electrodes and tubular wires for gas metal arc welding and metal arc welding of carbon steel, carbon-manganese alloyedsteel, microalloyed steel and low-alloyed steel — Welds and v/eld meta! bars for butt weld tests
SIS SS 06 17 10-1984 Welding electrodes - Test specimen for determination of weld metal composition
SIS SS 428 91 05-1985 Portable single po/e voltage testers for 3,6 - 420 kV highest system voltage - Design and testing

International Organization for Standardization (ISO), Electrode + Test + Electrode Material

ISO 5182:1978 Materials for resistance welding electrodes and ancillary equipment
ISO 5182:2008 Resistance welding - Materials for electrodes and ancillary equipment
ISO 5182:1991 Welding; materials for resistance welding electrodes and ancillary equipment
ISO 5182:2016 Resistance welding - Materials for electrodes and ancillary equipment
ISO 11713:2000 Carbonaceous materials used in the production of aluminium - Cathode blocks and baked anodes - Determination of electrical resistivity at ambient temperature
ISO 6257:1980 Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Sampling
ISO 6375:1980 Carbonaceous materials for the production of aluminium; Cokes for electrodes; Sampling
ISO 8006:1985 Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Determination of ash
ISO 10143:2014 Carbonaceous materials for the production of aluminium - Calcined coke for electrodes - Determination of the electrical resistivity of granules
ISO 10143:1995 Carbonaceous materials for the production of aluminium - Calcined coke for electrodes - Determination of the electrical resistivity of granules
ISO 6998:1984 Carbonaceous materials for the production of aluminium — Pitch for electrodes — Determination of coking value
ISO 12977:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of volatile matter content
ISO 6998:1997 Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value
ISO 6257:2002 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Sampling
ISO/CD 11713:2023 Carbonaceous materials used in the production of aluminium — Cathode blocks and baked anodes — Determination of electrical resistivity at ambient temperature
ISO 8003:1985 Carbonaceous materials used in the production of aluminium; Pitch for electrodes; Measurement of dynamic viscosity
ISO 10143:2019 Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules
ISO 10238:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of sulfur content by an instrumental method
ISO 6999:1983 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of density; Pycnometric method
ISO 9055:1988 Carbonaceous materials for the production of aluminium; pitch for electrodes; determination of sulfur content by the bomb method
ISO/DIS 12977 Carbonaceous materials for use in the production of aluminium - Pitch for electrodes - Loss of volatile matter
ISO 5940:1981 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of softening point by the ring-and-ball method
ISO 6376:1980 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of content of toluene-insoluble material
ISO 6791:1981 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of contents of quinoline-insoluble material
ISO 6998:1997/cor 1:1999 Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of coking value; Technical Corrigendum 1
ISO 12979:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of C/H ratio in the quinoline-insoluble fraction
ISO 10236:1995 Carbonaceous materials for the production of aluminium - Green coke and calcined coke for electrodes - Determination of bulk density (tapped)
ISO 5940-1:2019 Carbonaceous materials for the production of aluminium — Pitch for electrodes — Part 1: Determination of softening point by the ring-and-ball method
ISO 5939:1980 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of water content; Azeotropic distillation (Dean and Stark) method

Professional Standard - Electron, Electrode + Test + Electrode Material

SJ 1388-1978 Methods of measurement for anode conductance of noise-generator diodes
SJ 1389-1978 Methods of measurement for diodes leakage current between electrodes of noise-generator diodes
SJ 2140-1982 Methods of measurement for limiting voltage of silicon current regulator diodes
SJ 2214.6-1982 Method of measurement for collector-emitter reverse breakdown voltage of semiconductor phototransistors
SJ/Z 9009-1987 Methods for measurement of direct interelectrode capacitances of electronic tubes and valves
SJ 363-1973 Measurement of reflector total current, reflector ion current and reflector leakage current of reflex klystrons
SJ 444-1973 Methods of measurement for anode current and anode current on underheated condition of high-voltage rectifier tubes
SJ/Z 9010.1-1987 Measurements of electrical properties of electronic tubes and valves--Part 1: Measurement of electrode current
SJ 421-1973 Methods of measurement for leakage current between last anode and each electrode of low noise travelling wave tubes
SJ 2215.7-1982 Method of measurement for collector-emitter reverse breakdown voltage of semiconductor photocouplers (diodes)
SJ/T 2354-2015 Measuring methods for photodiodes of PIN、APD
SJ/T 2354-2015/0352 Measuring methods for photodiodes of PIN、APD
SJ 2354.5-1983 Method of measurement for capacitance of PIN and avalanche photodiodes
SJ 2354.3-1983 Method of measurement for dark current of PIN and avalanche photodiodes
SJ/Z 1171-1977 Methods for determination of polarization curve of electroplating solution
SJ 431-1973 Methods of measurement for voltages and currents of O-type backward-wave tube on per-electrodes
SJ 364-1973 Measurement of cathode current of reflex klystrons
SJ 445-1973 Methods of measurement for cathode pulse emission current and cathode pulse emission current on underheated condition of high-voltage rectifier tubes
SJ/T 2214-2015 Measuring methods for semiconductor photodiode and phototransistor
SJ 2354.1-1983 General procedures of measurement for electrical and optical parameters of PIN and avalanche photodiodes
SJ 420-1973 Methods of measurement for voltages and currents on per-electrode of low noise travelling wave tubes
SJ/Z 9010.15-1987 Measurements of electrical properties of electronic tubes and valves--Part 15: Methods of measurement for spurious and unwanted electrode currents
SJ 2138-1982 Methods of measurement for regulated current of silicon current regulator diodes
SJ 2141-1982 Methods of measurement for breakdown voltage of silicon currenet regulator diodes
SJ/Z 9010.9-1987 Measurements of electrical properties of electronic tubes and valves--Part 9: Methods of measuring the cathode-interface impedance
SJ 1387-1978 Methods of measurement for filament current and filament voltage of noise-generator diodes
SJ 2354.2-1983 Method of measurement for reverse break-down voltage of PIN and avalanche photodiodes
SJ 2354.6-1983 Method of measurement for responsivity of PIN and avalanche photodiodes
SJ 455-1973 Methods of measurement for static interelectrode capacitance of high-voltage rectifier tubes
SJ 1718-1981 Measurement of cathode pulse current of power klystrons
SJ 366-1973 Measurement of interelectrode leakage current of reflex klystrons
SJ 2354.13-1983 Method of measurement for multiplication factor of PIN and avalanche photodiodes
SJ 2214.3-1982 Method of measurement for dark current of semiconductor photodiodes
SJ 2214.5-1982 Method of measurement for junction capacitance of semiconductor photodiodes
SJ 2214.8-1982 Method of measurement for dark current voltage of semiconductor phototransistors
SJ/Z 9010.24-1987 Measurement of electrical properties of electronic tubes Part 24 Methods of measurement for cathode-ray charge-storage tubes
SJ 1395-1978 Methods of measurement for anode current and tube voltage drop of gas discharge noise tubes
SJ 1230-1977 Methods of measurement for high frequency rectified current of germanium detector diodes
SJ 2354.4-1983 Method of measurement for forward voltage drop of PIN and avalanche photodiodes
SJ 2142-1982 Methods of measurement for current temperature coefficient of silicon current regulator diodes
SJ 966-1975 Methods of measurement for reverse breakdown voltage of silicon switching diodes
SJ 2214.10-1982 Method of measurement for light current of semiconductor photodiodes and phototransistors
SJ 1386-1978 Measurement conditions for noise-generator diodes and gas discharge noise tubes
SJ 2658.4-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for capacitance
SJ/Z 9010.13-1987 Measurements of electrical properties of electronic tubes and valves--Part 13: Methods of measurement for emission current from hot cathodes for high-vacuum electronic tubes and valvea
SJ 2354.12-1983 Method of measurement for temperature factor of reverse breakdown voltage of PIN and avalanche photodiodes
SJ 2658.3-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for backward voltage
SJ 1391-1978 Methods of measurement for voltage standing wave ratio on cold conditions of noise-generator diodes
SJ 1393-1978 Methods of measurement for cathode preheating time of gas discharge noise tubes
SJ 2354.14-1983 Method of measurement for excess noise factor of PIN and avalanche photodiodes

Taiwan Provincial Standard of the People's Republic of China, Electrode + Test + Electrode Material

CNS 8105-1981 Test Method for Transistor Collector - Emitter Saturation Voltage

American National Standards Institute （ANSI), Electrode + Test + Electrode Material

ANSI/ASTM D5288:2010 Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ANSI/ASTM D1830:1999 Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method (10.01)

Professional Standard - Military and Civilian Products, Electrode + Test + Electrode Material

WJ 2100-2004 Test method for silicon photodiodes and silicon avalanche photodiodes
WJ 2506-1998 Verification Regulations for Photodiode Dynamic Tester

国家市场监督管理总局、中国国家标准化管理委员会, Electrode + Test + Electrode Material

GB/T 24533-2019 Graphite negative electrode materials for lithium ion battery
GB/T 13083-2018 Determination of fluorine in feeds—Ion selective electrode method
GB/T 24488-2021 Test method for electrochemical properties of magnesium alloys sacrificial anode
GB/T 37946-2019 Test method of thermal stability of materials for organic light emitting diode display (OLED)

Lithuanian Standards Office , Electrode + Test + Electrode Material

LST EN ISO 5182:2009 Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2008)
LST EN ISO 14372:2011 Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2011)

HU-MSZT, Electrode + Test + Electrode Material

ZA-SANS, Electrode + Test + Electrode Material

SANS 5182:1991 Welding - Materials for resistance welding electrodes and ancillary equipment

BE-NBN, Electrode + Test + Electrode Material

NBN T 03-488-1988 Carbonaceous materials used in the production of aluminium - Pitch for electrodes- Determination of ash
NBN T 03-479-1984 Carbonaceous materials for the production of aluminium - Cokes for elec-trodes - Sampling
NBN T 03-478-1984 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Sampling
NBN T 03-483-1988 Carbonaceous materials forthe production of aluminium - Pitch for eletrodes - Determination of coking value
NBN T 03-481-1984 Carbonaceous materials for the production of aluminium - Fitch for elec-trodes - Determination of content of quinoline-insoluble material
NBN T 03-480-1984 Carbonaceous materials for the production of aluminium - Pitch for elec-trodes - Determination of content of toluene-insoluble material
NBN T 03-485-1988 Carbonaceous materials used in the production of aluminium - Pitch for eletrodes- Measurement of dynamic viscosity
NBN T 03-484-1985 Carbonaceous materials for the production of aluminium - Pitch for electrodes-Determination of density-Pyknometric method
NBN T 03-476-1984 Carbonaceous materials for the production of aluminium - Pitch for electrodes - Determination of water content - Azeotropic distillation (Dean and Stark) method
NBN T 03-477-1984 Carbonaceous materials for the production of aluminium - Pitch for elec-trodes - Determination of softening point by ring-and-ball method

CZ-CSN, Electrode + Test + Electrode Material

CSN 35 8539-1968 Methods of testing anodě resistance of electronic tubes
CSN 35 8542-1968 Methods of testing interelectrode capacitances of electronio tubes

IPC - Association Connecting Electronics Industries, Electrode + Test + Electrode Material

IPC TM-650 2.6.25B-2016 Conductive Anodic Filament (CAF) Resistance Test: X-Y Axis
IPC TM-650 2.6.25A-2012 Conductive Anodic Filament (CAF) Resistance Test: X-Y Axis
IPC 9691A CHINESE-2007 User Guide for the IPC-TM-650@ Method 2.6.25@ Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)
IPC 9691A CD-2007 User Guide for the IPC-TM-650@ Method 2.6.25@ Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)
IPC 9691A CHINESE CD-2007 User Guide for the IPC-TM-650@ Method 2.6.25@ Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)

国家能源局, Electrode + Test + Electrode Material

NB/T 42082-2016 All-vanadium redox flow battery electrode testing method
NB/T 42146-2018 Test methods for zinc-bromine flow battery electrodes, separators, and electrolytes

IT-UNI, Electrode + Test + Electrode Material

UNI 7320-1974

RU-GOST R, Electrode + Test + Electrode Material

GOST R ISO 11713-2014 Carbonaceous materials used in the production of aluminium. Cathode blocks and baked anodes. Determination of electrical resistivity at ambient temperature
GOST R ISO 6375-2015 Carbonaceous materials used in the production of aluminium. Cokes for electrodes. Sampling
GOST R ISO 6257-2015 Carbonaceous materials used in the production of aluminium. Pitch for electrodes. Sampling
GOST R ISO 10143-2016 Carbonaceous materials for the production of aluminium. Calcined coke for electrodes. Determination of the electrical resistivity of granules
GOST R ISO 6998-2017 Carbonaceous materials for the production of aluminium. Pitch for electrodes. Determination of coking value
GOST R 59566-2021 Nanomanufacturing. Key control characteristics. Part 4-5. Cathode nanomaterials for nano-enabled electrical energy storage. Determination of electrochemical characteristics with 3-electrode cell
GOST R ISO 10238-2015 Carbonaceous materials used in the production of aluminium. Pitch for electrodes. Determination of sulfur content by an instrumental method
GOST 25995-1983 Electrodes for measurement of bioelectric potentials. General technical requirements and test methods
GOST 25209-1982 Plastics and polymer films. Methods for the determination of surface charges of electrets
GOST R ISO 10236-2016 Carbonaceous materials used in the production of aluminium. Green coke and calcined coke for electrodes. Determination of bulk density (tapped)
GOST R 59565-2021 Nanomanufacturing. Key control characteristics. Part 4-3. Electrode nanomaterials for electric energy storage devices. Determination of electrical resistance

Jiangxi Provincial Standard of the People's Republic of China, Electrode + Test + Electrode Material

DB36/T 690-2012 Hydrogen Storage Alloy Powder for Nickel Metal Hydride Battery Anode Material
DB36/T 816-2014 AB3 type hydrogen storage alloy powder for nickel metal hydride battery anode material

CH-SNV, Electrode + Test + Electrode Material

SNV 37109-1966

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Electrode + Test + Electrode Material

IPC TM-650 2.6.25-2003 Conductive Anodic Filament (CAF) Resistance Test: X-Y Axis
IPC 9691-2005 User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)

Canadian Standards Association (CSA), Electrode + Test + Electrode Material

CSA C22.2 NO.160-2015 Voltage and Polarity Testers (Third Edition)

SAE - SAE International, Electrode + Test + Electrode Material

SAE J3021-2014 Recommended Practice for Determining Material Properties of Li-Battery Cathode Active Materials
SAE J3021-2021 Recommended Practice for Determining Material Properties of Li-Battery Cathode Active Materials

United States Navy, Electrode + Test + Electrode Material

NAVY MIL-PRF-28800 F-1996 TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR

Institute of Electrical and Electronics Engineers (IEEE), Electrode + Test + Electrode Material

IEEE Std C37.103-1990 Guide for differential and polarizing relay circuit testing
IEEE Std C37.103-2004 IEEE Guide for Differential and Polarizing Relay Circuit Testing
IEEE Std C37.103-2015 IEEE Guide for Differential and Polarizing Relay Circuit Testing
IEEE PC37.103/D5, July 2014 IEEE Draft Guide for Differential and Polarizing Relay Circuit Testing
IEEE PC37.103/D7.0, April 2015 IEEE Approved Draft Guide for Differential and Polarizing Relay Circuit Testing

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Electrode + Test + Electrode Material

IEEE C37.103-1990 Guide for Differential and Polarizing Relay Circuit Testing
IEEE C37.103-2004 Guide for Differential and Polarizing Relay Circuit Testing
IEEE C37.103-2015 Guide for Differential and Polarizing Relay Circuit Testing

RO-ASRO, Electrode + Test + Electrode Material

STAS 10624-1988 Electric welding by pressure SPECIFICATIONS FOR MATERIALS USED FOR CONTACT ELECTRODS AND ANCILLARY EQUIPMENTS

TR-TSE, Electrode + Test + Electrode Material

TS 2441-1976 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 1 : MEASUREMENT OF ELECTRODE CURRENT
TS 2449-1976 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 9 : METHODS OF MEASURING THE CATHODE-INTERFACE IMPEDANCE
TS 2455-1976 Measurements Of The Electrical Properties Of ElectronicTubes And Valves Part 15: Methods Of Measurement Of Spurious And ünwanted Electrode Currents

AR-IRAM, Electrode + Test + Electrode Material

IRAM 2057-1952

European Committee for Electrotechnical Standardization（CENELEC）, Electrode + Test + Electrode Material

EN 61189-5-503:2017 Test methods for electrical materials, printed board and other interconnection structures and assemblies - Part 5-503: General test method for materials and assemblies - Conductive anodic filaments (CAF) testing of circuit boards

YU-JUS, Electrode + Test + Electrode Material

JUS N.R1.115-1977 Electronic tubes. Measurements of the electrical properties. Methods of measurement of spurious and unwanted electrode currents

IEC - International Electrotechnical Commission, Electrode + Test + Electrode Material

TS 62607-4-1-2014 Nanomanufacturing – Key control characteristics – Part 4-1 Cathode nanomaterials for lithium ion batteries – Electrochemical characterisation@ 2-electrode cell method (Edition 1.0)
TS 62607-4-5-2017 Nanomanufacturing - Key control characteristics - Part 4-5: Cathode nanomaterials for nano-enabled electrical energy storage - Electrochemical characterization@ 3-electrode cell method (Edition 1.0)
TS 62607-4-1-2015 Nanomanufacturing – Key control characteristics – Part 4-1: Cathode nanomaterials for nano-enabled electrical energy storage – Electrochemical characterisation@ 2-electrode cell method (Edition 2.0)
TS 62916-2017 Photovoltaic modules – Bypass diode electrostatic discharge susceptibility testing (Edition 1.0)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Electrode + Test + Electrode Material

GB/T 33827-2017 Determination of magnetic impurities in anode nanomaterials for Li-ion battery

Shandong Provincial Standard of the People's Republic of China, Electrode + Test + Electrode Material

DB37/T 2653-2015 Determination of Fertilizer Fluoride by Ion Selective Electrode Method
DB37/T 1944-2011 General Technical Specifications for Lithium Iron Phosphate Cathode Material (for Li-ion Batteries)

International Electrotechnical Commission (IEC), Electrode + Test + Electrode Material

IEC TS 62607-4-1:2014 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method
IEC TS 62607-4-1:2015 Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for nano-enabled electrical energy storage - Electrochemical characterisation, 2-electrode cell method
IEC TS 62607-4-5:2017 Nanomanufacturing - Key control characteristics - Part 4-5: Cathode nanomaterials for nano-enabled electrical energy storage - Electrochemical characterization, 3-electrode cell method
IEC 113/173/DTS:2012 IEC/TS 62607-4-1: Nanomanufacturing - Key control characteristics - Part 4-1: Cathode nanomaterials for lithium ion batteries - Electrochemical characterisation, 2-electrode cell method
IEC 62047-10:2011/COR1:2012 Semiconductor devices - Micro-electromechanical devices - Part 10: Micro-pillar compression test for MEMS materials; Corrigendum 1
IEC TS 62565-5-2:2022 Nanomanufacturing - Material specifications - Part 5-2: Nano-enabled electrodes of electrochemical capacitors - Blank detail specification

GOSTR, Electrode + Test + Electrode Material

GOST R 57153-2016 Nanomanufacturing. Key control characteristics. Part 4-1. Cathode nanomaterials for lithium ion batteries. Electrochemical characterisation, 2-electrode cell method

Professional Standard - Energy, Electrode + Test + Electrode Material

NB/T 42007-2013 Test method of bipolar plate for vanadium redox flow battery

Military Standard of the People's Republic of China-General Armament Department, Electrode + Test + Electrode Material

GJB 7675-2012 Test methods for microwave tube cathodes and components

PT-IPQ, Electrode + Test + Electrode Material

E 302-1974

AASHTO - American Association of State Highway and Transportation Officials, Electrode + Test + Electrode Material

TP51-1995 Standard Test Method for Testing Cathodic Protection Materials and Systems for Bridge Decks (2000 Edition)
T 373M/T 373-2017 Standard Method of Test for Comparative Qualitative Corrosion Characterization of Steel Bars Used for Concrete Reinforcement (Linear Polarization Resistance and Potentiodynamic Polarization Tests)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Electrode + Test + Electrode Material

JEDEC JESD5-1982 Mesurement of Temperature Coefficient of Voltage Regulator Diodes
JEDEC JESD24-11-1996 Power MOSFET Equivalent Series Gate Resistance Test Method Addendum to JEDEC JESD 24

Guangdong Provincial Standard of the People's Republic of China, Electrode + Test + Electrode Material

DB44/T 1372-2014 General Technical Requirements for Positive and Negative Electrode Materials of Lithium-ion Traction Batteries for Electric Vehicles

ES-AENOR, Electrode + Test + Electrode Material

UNE 25 054

GM North America, Electrode + Test + Electrode Material

GM GM158M-1997 Vibration Control Material for Doubler Plate, Pre - Elpo Applications

AWS - American Welding Society, Electrode + Test + Electrode Material

A5.10/A5.10M-2012 Welding Consumables - Wire Electrodes@ Wires and Rods for Welding of Aluminum and Aluminum-Alloys - Classification (10th Edition)

Indonesia Standards, Electrode + Test + Electrode Material

SNI 05-4006-1996 Eddy current examination method for installed nonferromagnetic heat exchanger tubing.
SNI 06-6876-2002 Test methods of ammonia content in water by ion selective electrode

CO-ICONTEC, Electrode + Test + Electrode Material

ICONTEC 1332-1981

The American Road & Transportation Builders Association, Electrode + Test + Electrode Material

AASHTO T 200-1979 Standard Method of Test for pH of Aqueous Solutions with the Glass Electrode
AASHTO TP51-1995 Standard Test Method for Testing Cathodic Protection Materials and Systems for Bridge Decks 2000 Edition

Hunan Provincial Standard of the People's Republic of China, Electrode + Test + Electrode Material

DB43/T 1591-2019 Lithium battery cathode material energy consumption limit and calculation method per unit product

Professional Standard - Electricity, Electrode + Test + Electrode Material

DL/T 1566-2016 Guide for measurement of DC transmission line and earth electrode line parameters