ZH
RU
ES

Thermal Analyzer Characteristics

Thermal Analyzer Characteristics, Total:497 items.

In the international standard classification, Thermal Analyzer Characteristics involves: Coals, Telecommunication systems, Electricity. Magnetism. Electrical and magnetic measurements, Analytical chemistry, Thermodynamics and temperature measurements, Industrial automation systems, Environmental testing, Electrical and electronic testing, Cereals, pulses and derived products, Nuclear energy engineering, Medical equipment, Company organization and management, Quality, Test conditions and procedures in general, Plastics, Particle size analysis. Sieving, Tobacco, tobacco products and related equipment, Products of the chemical industry, Protection against fire, Mining equipment, Road engineering, Construction of airports, Optics and optical measurements, Physics. Chemistry, Vocabularies, Protection of and in buildings, Electronic components in general, Fuels, Geology. Meteorology. Hydrology, Petroleum products in general, Raw materials for rubber and plastics, Wastes, Lubricants, industrial oils and related products, Metrology and measurement in general, Equipment for the chemical industry, Dentistry, Shipbuilding and marine structures in general, Construction materials, Characteristics and design of machines, apparatus, equipment, Electrical engineering in general, Insulating materials, Air quality, Ceramics, Non-destructive testing, Measurement of volume, mass, density, viscosity, Measurement of fluid flow, Safety of machinery, Testing of metals, Ferrous metals, Rubber, Solar energy engineering, Pulps, Installations in buildings, Cellular materials, Space systems and operations, Water quality, Fishing and fish breeding, Sensory analysis, Radiation measurements, Kitchen equipment, Domestic safety, Linear and angular measurements, Textile fibres, Laboratory medicine, Rubber and plastics products, Mechanical testing.

Professional Standard - Machinery, Thermal Analyzer Characteristics

JB/T 6298-1992 Test method of determining combustion characteristics of coal with thermal analyzer
JB/T 9369-1999 Differential thermal analyzer
JB/T 9369-2017 Differential Thermal Analyzer
JB/T 6856-1993 Thermogravimetry-differential thermal analyzer
JB/T 6856-2017 Thermogravimetric-Differential Thermal Analyzer
JB/T 6854-1993 Performance representation of sample handling systems for process analytical instruments
JB/T 11603.2-2013 Non-destructive testing instruments.Acoustic emission.Equipment characterization.Part 2: Verification of operating characteristic

National Metrological Verification Regulations of the People's Republic of China, Thermal Analyzer Characteristics

JJG(邮电) 050-1999 Characteristic analyzer for PCM voice channels
JJG 1135-2017 Thermogravimetric Analyzers
JJG(地质) 1018-1990 Verification Regulations for DT-301B Thermal Analyzer
JJG(教委) 10-1992 1090B Series Thermal Analyzer Verification Regulations
JJG(电子) 03004-1988 AV3621 Type Characteristic Analyzer Trial Verification Regulations
JJG(机械) 4-1990 Verification Regulations for Magnetic Analyzer
JJG(电子) 03003-1988 Trial Verification Regulations for Characteristic Analyzer Exciter

British Standards Institution (BSI), Thermal Analyzer Characteristics

BS 6329:1982 Method of expression of the properties of spectrum analyzers
BS EN 61207-6:2015 Tracked Changes. Expression of performance of gas analyzers. Photometric analyzers
BS EN 61207-7:2014 Expression of performance of gas analyzers. Tuneable semiconductor laser gas analyzers
BS 6653:1985 Method for expression of the properties of logic analyzers
PD ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
BS PD CEN/TS 15901-14:2016 Road and airfield surface characteristics. Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and Recorder of ViaTech AS)
BS EN 60746-2:2003 Expression of performance of electrochemical analyzers - pH value
BS EN 60746-1:2003 Expression of performance of electrochemical analyzers - General
BS EN ISO 22007-3:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Temperature wave analysis method
BS 5849:1980 Method of expression of performance of air quality infra-red analysers
BS DD ISO/TS 11251:2010 Nanotechnologies. Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
BS EN 61115:1994 Expression of performance of sample handling systems for process analyzers
BS EN 1744-1:2009 Tests for chemical properties of aggregates - Chemical analysis
BS EN 1744-1:2009+A1:2012 Tests for chemical properties of aggregates. Chemical analysis
BS EN 1744-1:2010 Tests for chemical properties of aggregates. Chemical analysis
BS EN ISO 23674:2022 Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
BS EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
BS ISO 15632:2012 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
BS ISO 15632:2021 Microbeam analysis. Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
BS ISO 15239:2005 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
BS 6200-3.22.4:1997 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of nitrogen - Thermal conductimetric method after fusion in a current of inert gas
BS EN ISO 8655-7:2006 Piston-operated volumetric apparatus. Non-gravimetric methods for the assessment of equipment performance
BS EN ISO 8655-7:2005 Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance
BS ISO 17862:2022 Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers
BS DD ISO/TS 11308:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using thermogravimetric analysis
21/30387777 DC BS EN ISO 23674. Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition. Atomic absorption spectrometry (mercury analyzer)
BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
20/30409963 DC BS ISO 17862. Surface chemical analysis. Secondary ion mass spectrometry. Linearity of intensity scale in single ion counting time-of-flight mass analysers

AENOR, Thermal Analyzer Characteristics

UNE 20776:1996 EXPRESSION OF THE PROPERTIES OF LOGIC ANALYZERS.
UNE-EN 61207-3:2004 Gas analyzers - Expression of performance -- Part 3: Paramagnetic oxygen analyzers
UNE-EN 60746-2:2003 Expression of performance of electrochemical analyzers -- Part 2: pH value
UNE-EN 60746-1:2003 Expression of performance of electrochemical analyzers -- Part 1: General
UNE-ISO 248-2:2013 Rubber, raw — Determination of volatilematter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
UNE-EN 60746-3:2004 Expression of performance of electrochemical analyzers -- Part 3: Electrolytic conductivity

International Electrotechnical Commission (IEC), Thermal Analyzer Characteristics

IEC 60714:1981 Expression of the properties of spectrum analyzers
IEC 60776:1983 Expression of the properties of logic analysers
IEC 61207-3:2019 RLV Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
IEC TS 62607-6-19:2021 Nanomanufacturing - Key control characteristics - Part 6-19: Graphene-based material - Elemental composition: CS analyser, ONH analyser
IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
IEC 61342:1995 Nuclear instrumentation - Multichannel pulse height analyzers - Main characteristics, technical requirements and test methods
IEC 61207-3:1998 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
IEC 61207-3:2002/COR2:2003 Gas analyzers - Expression of performance - Part 3：Paramagnetic oxygen analyzers; Technical Corrigendum 2
IEC 61207-7:2013/COR1:2015 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers; Corrigendum 1
IEC 60528:1975 Expression of performance of air quality infra-red analyzers
IEC 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
IEC 60746-1:1982 Expression of performance of electrochemical analyzers. Part 1 : General
IEC 60746-2:1982 Expression of performance of electrochemical analyzers. Part 2 : pH value
IEC 60746-2:2003 Expression of performance of electrochemical analyzers - Part 2: pH- value
IEC 60746-1:2003 Expression of performance of electrochemical analyzers - Part 1: General
IEC 62551:2012 Analysis techniques for dependability - Petri net techniques
IEC 60601-2-39:2003 Medical electrical equipment - Part 2-39: Particular requirements for the safety of peritoneal dialysis equipment
IEC 60746-5:1992 Expression of performance of electrochemical analyzers; part 5: oxidation-reduction potential or redox potential
IEC 60746-3:1985 Expression of performance of electrochemical analyzers - Part 3 : Electrolytic conductivity
IEC 60746-2:2003/COR2:2003 Corrigendum 2 - Expression of performance of electrochemical analyzers - Part 2: pH value
IEC 60746-2:2003/COR1:2003 Corrigendum 1 - Expression of performance of electrochemical analyzers - Part 2: pH value
IEC 60216-3:2021 RLV Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics
IEC 60216-3:2021 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics

International Organization for Standardization (ISO), Thermal Analyzer Characteristics

ISO 8158:1985 Evaluation of the performance characteristics of gas analysers
ISO/TS 11308:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using thermogravimetric analysis
ISO/TS 11251:2010 Nanotechnologies - Characterization of volatile components in single-wall carbon nanotube samples using evolved gas analysis/gas chromatograph-mass spectrometry
ISO 5530-4:1983 Wheat flour — Physical characteristics of doughs — Part 4: Determination of rheological properties using an alveograph
ISO 15239:2005 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
ISO 5530-2:2020 Wheat flour — Physical characteristics of doughs — Part 2: Determination of rheological properties using an extensograph
ISO/CD 22207:1980 Kraft lignin - Determination of thermal stability by Thermogravimetry
ISO/DIS 22207:2023 Kraft lignin — Determination of thermal stability by Thermogravimetry
ISO/TR 14187:2011 Surface chemical analysis - Characterization of nanostructured materials
ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
ISO 5530-1:2020 Wheat flour — Physical characteristics of doughs — Part 1: Determination of water absorption and rheological properties using a farinograph
ISO 23674:2022 Cosmetics — Analytical methods — Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
ISO 5530-4:1991 Wheat flour; physical characteristics of doughs; part 4: determination of rheological properties using an alveograph
ISO 11132:2021 Sensory analysis - Methodology - Guidelines for the measurement of the performance of a quantitative descriptive sensory panel
ISO 11132:2012 Sensory analysis - Methodology - Guidelines for monitoring the performance of a quantitative sensory panel
ISO 21270:2004 Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
ISO 248-2:2019 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit

工业和信息化部/国家能源局, Thermal Analyzer Characteristics

JB/T 7405-2017 Thermogravimetric Analyzer

CZ-CSN, Thermal Analyzer Characteristics

CSN ISO 8158:1994 Evaluation of the performance characteristics of gas analysers
CSN 38 5523-1960 Fuel gas analysis with the Orsat gas analyser.
CSN EN 60335-2-15-2005

Association Francaise de Normalisation, Thermal Analyzer Characteristics

NF C42-695:1985 Electronic measuring instruments. Expression of the properties of logic analyzers.
NF C46-253*NF EN 61207-3:2002 Gas analysers - Expression of performance - Part 3 : paramagnetic oxygen analysers.
NF C46-251-3*NF EN IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3 : paramagnetic oxygen analysers
NF EN IEC 61207-3:2019 Analyseurs de gaz - Expression des performances - Partie 3 : analyseurs d'oxygène paramagnétiques
NF EN 61207-6:2015 Expression des performances des analyseurs de gaz - Partie 6 : analyseurs photométriques
NF C46-251-6*NF EN 61207-6:2015 Expression of performance of gas analyzers - Part 6 : photometric analyzers
NF C46-256:1994 Expression of performance of gas analysers. Part 6 : photometric analyzers.
NF S90-304:1989 MEDICO-SURGICAL EQUIPMENT. HAEMODIALYSIS EQUIPMENT. OPERATING DATA.
NF C46-251-7*NF EN 61207-7:2014 Expression of performance of gas analyzers - Part 7 : tunable semiconductor laser gas analyzers
NF X50-152:1990 Value analysis. Basic characteristics.
NF X50-100:1996 Functional analysis. Basic characteristics.
NF EN 61207-7:2014 Expression des performances des analyseurs de gaz - Partie 7 : analyseurs de gaz laser à semiconducteurs accordables
NF C74-327:2003 Medical electrical equipment - Part 2-39 : particular requirements for the safety of peritoneal dialysis equipment.
NF T70-315:1995 ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. TENSILE PROPERTIES.
NF C46-251:1994 Expression of performance of gas analyzers. Part 1 : general.
NF EN 61207-1:2011 Expression des performances des analyseurs de gaz - Partie 1 : généralités
NF C46-260:1995 Industrial-process control. Safety of analyser houses.
NF T70-314:1995 ENERGETIC MATERIALS FOR DEFENSE. PHYSICAL-CHEMICAL ANALYSIS AND PROPERTIES. COMPRESSION PROPERTIES.
XP P98-832-5*XP CEN/TS 15901-5:2011 Road and airfield surface characteristics - Part 5 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK) : ROAR (Road Analyser and Recorder of Norsemeter)
NF C74-322:1986 Medical electrical equipment. Part 2 : particular requirement for safety of haemodialysis equipment.
NF T70-538:2003 Energetic materials for defense - Safety, vulnerability - Compatibility by thermo-gravimetric analysis
NF X50-152:2007 Value management - Basic characteristics of value analysis
NF X20-377:1980 Analyse des gaz - Méthodes d'analyse de l'oxygène basées sur les propriétés paramagnétiques de ce gaz.
XP P98-832-2*XP CEN/TS 15901-2:2011 Road and airfield surface characteristics - Part 2 : procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL) : ROAR (Road Analyser and Recorder of Norsemeter)
NF EN 60746-1:2004 Expression des qualités de fonctionnement des analyseurs électrochimiques - Partie 1 : généralités
NF C46-254*NF EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
NF EN 62703:2013 Expression des performances des analyseurs d'oxygène fluorométriques en milieu liquide
NF EN ISO 23674:2022 Cosmétiques - Méthodes d'analyse - Dosage direct des traces de mercure dans les cosmétiques par décomposition thermique et spectrométrie d'absorption atomique (analyseur de mercure)
NF T70-313:2014 Energetic materials for defense - Physical-chemical analysis and properties - Coefficient of linear thermal expansion by direct measurement
NF T70-313:1995 Energetic materials for defense. Physical-chemical analysis and properties. Coefficient of linear thermal expansion by direct measurement.
NF EN 60746-2:2004 Expression des qualités de fonctionnement des analyseurs électrochimiques - Partie 2 : mesure du pH
NF C46-225*NF EN 61115:1994 Expression of performance of sample handling systems for process analyzers.
NF T46-017-3*NF ISO 6502-3:2018 Rubber - Measurement of vulcanization characteristics using curemeters - Part 3 : rotorless curemeter
NF T46-017-2*NF ISO 6502-2:2018 Rubber - Measurement of vulcanization characteristics using curemeters - Part 2 : oscillating disc curemeter
NF ISO 6502-3:2023 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide de rhéomètres - Partie 3 : rhéomètre sans rotor
NF ISO 6502-2:2018 Caoutchouc - Mesure des caractéristiques de vulcanisation à l'aide de rhéomètres- Partie 2 : rhéomètre à disque oscillant
NF C74-327*NF EN 60601-2-39:2008 Medical electrical equipment - Part 2-39 : particular requirements for basic safety and essential performance of peritoneal dialysis equipment
NF EN 15964:2011 Ethylotests, autres que les dispositifs à usage unique - Exigences et méthodes d'essai
NF V03-717-2*NF EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2 : determination of rheological properties using a extensograph
NF E39-003:2006 District heating - Hot or cold water transport and distribution networks - Particularities of calculation.
NF E39-002:2006 District heating - Hot or cold water transport and distribution networks - Particularities of design.
NF E39-004:2006 District heating - Hot or cold water transport and distribution networks - Particularities of installation.
NF L17-451:1988 Aéronautique et espace - Préimprégnés de résine thermodurcissable - Analyse thermique différentielle - Méthode d'essai.
NF EN 60746-3:2004 Expression des qualités de fonctionnement des analyseurs électrochimiques - Partie 3 : conductivité électrolytique
NF EN ISO 5530-2:2015 Farines de blé tendre - Caractéristiques physiques des pâtes - Partie 2 : détermination des caractéristiques rhéologiques au moyen de l'extensographe
NF EN IEC 80601-2-59:2019 Appareils électromédicaux - Partie 2-59 : exigences particulières pour la sécurité de base et les performances essentielles des imageurs thermiques pour le dépistage des humains fébriles
NF EN IEC 80601-2-59/A1:2023 Appareils électromédicaux - Partie 2-59 : exigences particulières pour la sécurité de base et les performances essentielles des imageurs thermiques pour le dépistage des humains fébriles
NF C26-303:2002 Electrical insulating materials - Thermal endurance properties - Part 3 : instructions for calculating thermal endurance characteristics.
NF C26-303*NF EN 60216-3:2006 Electrical insulating materials - Thermal endurance properties - Part 3 : instructions for calculating thermal endurance characteristics
NF C26-303*NF EN IEC 60216-3:2021 Electrical insulating materials - Thermal endurance properties - Part 3 : instructions for calculating thermal endurance characteristics
NF EN ISO 5530-1:2015 Farines de blé tendre - Caractéristiques physiques des pâtes - Partie 1 : détermination de l'absorption d'eau et des caractéristiques rhéologiques au moyen du farinographe
NF T70-315:2004 Energetic materials for defense - Physical-chemical analysis and properties - Tensile properties.
NF T70-314:2004 Energetic materials for defense - Physical-chemical analysis and properties - Compression properties
NF P18-653-3*NF EN 1367-3:2002 "Tests for thermal and weathering properties of aggregates - Part 3 : boiling test for ""Sonnenbrand basalt""".
NF C31-023-6*NF EN 60851-6:2012 Winding wires - Test methods - Part 6 : thermal properties
NF G07-350*NF EN ISO 1973:2021 Textile fibres - Determination of linear density - Gravimetric method and vibroscope method
NF G07-350:1996 Textile fibres. Determination of linear density. Gravimetric method and vibroscope method.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Thermal Analyzer Characteristics

GB/T 30097-2013 Thermal analyzer for molten cast iron
GB/T 32267-2015 Terminology of performance testing for analytical instrument
GB/T 27761-2011 Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers
GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers
GB/T 11606.7-1989 The method of environmental test for analytical instruments--Damp heat, cyclic
GB/T 28971-2012 Cigarettes.Determination of tobacco specific N-nitrosamines in sidestream smoke.GC-TEA method
GB/T 42754-2023 General rules for performance evaluation of dry chemical analyzers
GB/T 13464-1992 Thermal analysis test methods for thermal stability of materials
GB/T 13464-2008 Thermal analysis test methods for thermal stability of materials
GB/T 19952-2005 Evaluation of the measurement performance of on-line analysers for coal
GB/T 43037-2023 Credibility analysis technology Petri net technology
GB/T 29174-2012 Thermal analysis test method for constant-temperature stability of materials
GB/T 20726-2015 Microbeam analysis.Selected instrumental performance parameters for the specification and checking of energy dispersive X-ray spectrometers for use in electron probe microanalysis
GB/T 18654.7-2008 Inspection of germplasm for cultured fishes. Part 7: Analysis of ecological characteristics
GB/T 15814.3-1995 Reagent of fireworks and firecrackers--Thermal compatibility test--Method of DTA and DSC
GB/T 21006-2007 Surface chemical analysis.X-ray photoelectron and Auger electron spectrometers.Linearity of intensity scale

Professional Standard - Agriculture, Thermal Analyzer Characteristics

JJG(教委) 014-1996 Calibration Regulations for Thermal Analyzers
NY/T 1753-2009 Determination of the pasting poperties of rice.Rapid visco analyzer(RVA)method
GB 10221.3-1988 Sensory Analysis Terms Terms related to sensory properties

SE-SIS, Thermal Analyzer Characteristics

SIS SS IEC 714:1983 Electronic measurement equipment - Expression of the properties of spectrum analyzers

American Society for Testing and Materials (ASTM), Thermal Analyzer Characteristics

ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E2918-18 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-18a Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-13 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-23 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E3142-18a(2023) Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1953-05 Standard Practice for Description of Thermal Analysis Apparatus
ASTM E1953-98 Standard Practice for Description of Thermal Analysis Apparatus
ASTM E1953-02 Standard Practice for Description of Thermal Analysis Apparatus
ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1953-20 Standard Practice for Description of Thermal Analysis and Rheology Apparatus
ASTM E2206-02 Standard Method for Force Calibration Of Thermomechnical Analyzers
ASTM E2744-10 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E2744-21 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-10(2015) Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-16 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2206-06 Standard Test Method for Force Calibration Of Thermomechnical Analyzers
ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2206-21 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2206-11(2015) Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E1860-97a Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E1363-03 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1860-07 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E1860-02 Standard Test Method for Elapsed Time Calibration Thermal Analyzers
ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E1363-18 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1860-13(2018) Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM E1860-13 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM E1363-16 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1363-13 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1363-08 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1363-23 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E1860-23 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers
ASTM E2113-04 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1953-07 Standard Practice for Description of Thermal Analysis and Rheology Apparatus
ASTM E2113-00 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1953-07(2013) Standard Practice for Description of Thermal Analysis and Rheology Apparatus
ASTM E1953-14 Standard Practice for Description of Thermal Analysis and Rheology Apparatus
ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM C518-17 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E2550-17 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2113-18 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2113-13 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2113-23 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E2082-00 Standard Guide for Descriptive Analysis of Shampoo Performance
ASTM E2082-06 Standard Guide for Descriptive Analysis of Shampoo Performance
ASTM E2082-12 Standard Guide for Descriptive Analysis of Shampoo Performance
ASTM D3795-00a(2006) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM D3795-00a(2012) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM E2995-15a(2020) Standard Specification for ASTM Thermohydrometers with Integral Low-Hazard Thermometers
ASTM D3764-19 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D3795-00a Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D8340-20a Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM D8340-20 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM D8340-22 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM D7690-11 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
ASTM E3346-22 Standard Guide for Combustion, Inert Gas Fusion and Hot Extraction Instruments for use in Analyzing Metals, Ores, and Related Materials
ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D3764-22 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM E2161-01 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E2161-06 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E2161-06a Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E2161-08 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM D7605-11(2016) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D7605-11(2022) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM D8340-21 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems
ASTM D3764-06 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D3764-06e1 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D6621-00(2017) Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D3764-13 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D3764-15e1 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D3764-09 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM E537-98 Standard Test Method for Assessing the Thermal Stability of Chemicals By Methods of Thermal Analysis
ASTM D6624-19 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM D6624-20 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data
ASTM E2161-13 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM E2402-05 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2551-18 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E3301-22 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag
ASTM E2551-20 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM D6375-09(2014) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer 40;TGA41; Noack Method
ASTM E2425-05 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
ASTM E2425-21 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
ASTM E2425-11 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
ASTM D6621-00(2012) Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D7825-12 Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer
ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

Professional Standard - Military and Civilian Products, Thermal Analyzer Characteristics

WJ 2292-1995 Verification Regulations for Thermogravimetric Analyzer
WJ 2291-1995 Calibration Regulations for Thermomechanical Analyzers

中国石油天然气总公司, Thermal Analyzer Characteristics

SY/T 6015-1994 Oil and gas display analyzer rock pyrolysis analysis method

German Institute for Standardization, Thermal Analyzer Characteristics

DIN EN 61207-6:1995 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:1994); German version EN 61207-6:1994
DIN EN 61207-6:2016-03 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:2014); German version EN 61207-6:2015 / Note: DIN EN 61207-6 (1995-02) remains valid alongside this standard until 2017-12-30.
DIN EN IEC 61207-3:2020-12 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (IEC 61207-3:2019); German version EN IEC 61207-3:2019 / Note: DIN EN 61207-3 (2002-11) and DIN EN 61207-3 Berichtigung 1 (2003-05) remain valid alongside this standard u...
DIN EN 61207-7:2015-07 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers (IEC 61207-7:2013); German version EN 61207-7:2013 / Note: Applies in conjunction with DIN EN 61207-1 (2011-04).
DIN 66135-2:2001 Particle characterization - Micropore analysis by gas adsorption - Part 2: Evaluation by isotherms comparison
DIN EN 61207-6:2016 Expression of performance of gas analyzers - Part 6: Photometric analyzers (IEC 61207-6:2014); German version EN 61207-6:2015
DIN EN 61207-1:2011-04 Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:2010); German version EN 61207-1:2010 / Note: DIN EN 61207-1 (1995-02) remains valid alongside this standard until 2013-07-01.
DIN EN 60746-1:2003 Expression of performance of electrochemical analyzers - Part 1: General (IEC 60746-1:2003); German version EN 60746-1:2003
DIN EN 60746-2:2003 Expression of performance of electrochemical analyzers - Part 2: pH-value (IEC 60746-2:2003 + Corrigendum 2003); German version EN 60746-2:2003
DIN EN IEC 61207-3:2020 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (IEC 61207-3:2019); German version EN IEC 61207-3:2019
DIN EN 61207-3:2002 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002); German version EN 61207-3:2002
DIN EN 60746-1:2003-09 Expression of performance of electrochemical analyzers - Part 1: General (IEC 60746-1:2003); German version EN 60746-1:2003 / Note: DIN IEC 60746-1 (1986-04) remains valid alongside this standard until 2006-02-01.
DIN 53804-2:1985 Stastistical interpretation of data; countable (discrete) characteristics
DIN EN 60746-3:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity (IEC 60746-3:2002 + Corrigendum 2002); German version EN 60746-3:2002
DIN 53765:1994 Testing of plastics and elastomeres; thermal analysis; DSC-method
DIN EN ISO 5530-2:2020-06 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020 / Note: Date of issue 2020-05-08*Intended as replacement for...
DIN EN ISO 5530-2:2015-03 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012); German version EN ISO 5530-2:2014 / Note: To be replaced by DIN EN ISO 5530-2 (2020-06).
DIN CEN/TS 15901-2:2010-03*DIN SPEC 1142:2010-03 Road and airfield surface characteristics - Part 2: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL): ROAR (Road Analyser and Recorder of Norsemeter); German version CEN/TS 15...
DIN CEN/TS 15901-5:2010-03*DIN SPEC 1145:2010-03 Road and airfield surface characteristics - Part 5: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK): ROAR (Road Analyser and Recorder of Norsemeter); German version CEN/TS 15...
DIN EN 61115:1994-08 Expression of performance of sample handling systems for process analyzers (IEC 61115:1992); German version EN 61115:1993
DIN EN 62703:2014-12 Expression of performance of fluorometric oxygen analyzers in liquid media (IEC 62703:2013); German version EN 62703:2013
DIN EN ISO 5530-1:2015-03 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2013); German version EN ISO 5530-1:2014 / Note: To be replaced by DIN EN ISO 5530-1 (2020-06).
DIN EN ISO 5530-1:2020-06 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO/DIS 5530-1:2020); German and English version prEN ISO 5530-1:2020 / Note: Date of issue 2020-05-08*Intended...
DIN IEC 60746-5:1996 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential (IEC 60746-5:1992)
DIN SPEC 91373-2:2021 Magnetocalorics - Part 2: Measurement of magnetocaloric properties; Text in English
DIN EN 60746-2:2003-09 Expression of performance of electrochemical analyzers - Part 2: pH-value (IEC 60746-2:2003 + Corrigendum 2003); German version EN 60746-2:2003 / Note: DIN IEC 60746-2 (1986-04) remains valid alongside this standard until 2006-02-01.
DIN EN ISO 23674:2022 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)

CENELEC - European Committee for Electrotechnical Standardization, Thermal Analyzer Characteristics

EN 61207-6:1994 Expression of Performance of Gas Analyzers Part 6: Photometric Analyzers
EN 61207-1:1994 Expression of Performance of Gas Analyzers Part 1: General

ES-UNE, Thermal Analyzer Characteristics

UNE-EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers (Endorsed by AENOR in February of 2015.)
UNE-EN IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (Endorsed by Asociación Española de Normalización in October of 2019.)
UNE-EN 61207-7:2013 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers (Endorsed by AENOR in January of 2014.)
UNE-EN 61207-7:2013/AC:2015 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers (Endorsed by AENOR in September of 2015.)
UNE-EN 61207-1:2010 Expression of performance of gas analyzers -- Part 1: General (Endorsed by AENOR in November of 2010.)
UNE-EN 60746-1:2004 ERRATUM Expression of performance of electrochemical analyzers -- Part 1: General
UNE-EN 61115:1993 EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS. (Endorsed by AENOR in April of 1996.)
UNE-EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media (Endorsed by AENOR in October of 2013.)
UNE-EN ISO 23674:2023 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
UNE-EN 60216-3:2006 Electrical insulating materials - Thermal endurance properties -- Part 3: Instructions for calculating thermal endurance characteristics (IEC 60216-3:2006) (Endorsed by AENOR in September of 2006.)
UNE-EN IEC 60216-3:2021 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics (Endorsed by Asociación Española de Normalización in June of 2021.)
UNE-EN IEC 80601-2-59:2019 Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening (Endorsed by Asociación Española de Normalización in November of 2019.)
UNE-EN IEC 80601-2-59:2019/A1:2023 Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening (Endorsed by Asociación Española de Normalización in April of 2023.)

Danish Standards Foundation, Thermal Analyzer Characteristics

DS/EN 61207-3/Corr.2:2003 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
DS/EN 61207-3/Corr.1:2003 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
DS/EN 61207-3:2002 Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
DS/IEC 776:1987 Expression of the properties of logic analysers
DS/ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
DS/EN 61207-1:2011 Expression of performance of gas analyzers - Part 1: General
DS/EN IEC 60216-3:2021 Electrical insulating materials – Thermal endurance properties – Part 3: Instructions for calculating thermal endurance characteristics
DS/EN 60746-1:2003 Expression of performance of electrochemical analyzers - Part 1: General
DS/EN 60746-2/Corr.2:2004 Expression of performance of electrochemical analyzers - Part 2: pH value
DS/EN 60746-2/Corr.1:2004 Expression of performance of electrochemical analyzers - Part 2: pH value
DS/EN 60746-2:2003 Expression of performance of electrochemical analyzers - Part 2: pH value
DS/CEN/TS 15901-2:2011 Road and airfield surface characteristics - Part 2: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL): ROAR (Road Analyser and Recorder of Norsemeter)
DS/CEN/TS 15901-5:2011 Road and airfield surface characteristics - Part 5: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK): ROAR (Road Analyser and Recorder of Norsemeter)
DS/EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
DS/EN 61115:1994 Expression of performance of sample handling systems for process analyzers
DS/EN 60746-3/Corr.1:2003 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
DS/EN 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
DS/INSTA 216:1990 Plastics pipes. Thermoanalytic test methods for the determination on oxidation stability
DS/ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
DS/ISO 5530-1:2013 Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph
DS/EN 60216-3:2007 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics

European Committee for Electrotechnical Standardization（CENELEC）, Thermal Analyzer Characteristics

EN IEC 61207-3:2019 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers
EN 61207-6:2015 Expression of performance of gas analyzers - Part 6:Photometric analyzers
HD 469-1987 Expression of the Properties of Logic Analysers
EN 61207-7:2013 Expression of performance of gas analyzers - Part 7: Tuneable semiconductor laser gas analyzers
EN 61207-1:2010 Expression of performance of gas analyzers - Part 1: General
EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
EN 60746-3:2002 Expression of performance of electrochemical analyzers - Part 3: Electrolytic conductivity
EN IEC 60216-3:2021 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics

Korean Agency for Technology and Standards (KATS), Thermal Analyzer Characteristics

KS C IEC 61207-6-2014(2019) Expression of performance of gas analyzers — Part 6: Photometric analyzers
KS C IEC 60746-1-2014(2019) Expression of performance of electrochemical analyzers — Part 1: General
KS C IEC 60746-2-2014(2019) Expression of performance of electrochemical analyzers — Part 2: pH value
KS M ISO 248-2:2014 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
KS P ISO 6360-7:2020 Dentistry — Number coding system for rotary instruments —Part 7: Specific characteristics of mandrels and special instruments
KS C IEC 60092-504-2007(2017) Electrical installations in ships－Part 504：Special features－Control and instrumentation
KS C IEC 60092-504-2007(2022) Electrical installations in ships－Part 504：Special features－Control and instrumentation
KS C IEC 60601-2-39:2008 Peritoneal dialysis equipment
KS C IEC 60601-2-39:2017 Medical electrical equipment — Part 2-39: Particular requirements for basic safety and essential performance of peritoneal dialysis equipment
KS C IEC 60746-3-2014(2019) Expression of performance of electrochemical analyzers — Part 3: Electrolytic conductivity
KS E ISO 15239:2007 Solid mineral fuels－Evaluation of the measurement performance of on-line analysers
KS P ISO 6360-6:2020 Dentistry — Number coding system for rotary instruments —Part 6: Specific characteristics of abrasive instruments
KS P ISO 6360-4:2020 Dentistry — Number coding system for rotary instruments —Part 4: Specific characteristics of diamond instruments
KS I ISO 8466-2014(2019) Water quality ― Calibration and evaluation of analytical methods and estimation of performance characteristics
KS D ISO 15632:2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
KS C IEC 60216-3:2017 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance
KS M 3706-2008(2013) Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
KS P ISO 6360-1:2020 Dentistry — Number coding system for rotary instruments —Part 1: General characteristics
KS D ISO 15470-2005(2020) Surface chemical analysis－X-ray photoelectron spectroscopy－Description of selected instrumental performance parameters
KS D ISO 21270:2005 Surface chemical analysis－X-ray photoelectron and Auger electron spectrometers－Linearity of intensity scale
KS M 3005-2002 Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS M 3005-2002(2022) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS M ISO 248-2-2014(2019) Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Thermal Analyzer Characteristics

GB/T 33304-2016 Testing method of combustion characteristics of coal—Thermogravimetric analysis

Professional Standard - Grain, Thermal Analyzer Characteristics

LS/T 6101-2002 Determination of pasting properties of cereals (rapid viscosity analyzer method)

Professional Standard - Petroleum, Thermal Analyzer Characteristics

SY/T 6481-2000 Pressure-volume-temperature (PVT) cell
SY 6481-2000 Crude oil high pressure physical property analyzer
SY/T 0545-2012 Determination of thermal property parameters of the wax precipitation in crude oil.Test method by differential scanning calorimetry
SY 0545-2012 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry
SY/T 0545-1995 Determination of Thermal Characteristic Parameters of Wax Precipitation in Crude Oil Differential Scanning Calorimetry

National Metrological Technical Specifications of the People's Republic of China, Thermal Analyzer Characteristics

JJF 1024-2006 Reliability analysis for measuring instruments
JJF(机械) 046-2009 Calibration specification for magnetic analyzer

AT-OVE/ON, Thermal Analyzer Characteristics

OVE EN IEC 61207-3:2021 Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (german version)

Lithuanian Standards Office , Thermal Analyzer Characteristics

LST EN 61207-6-2001 Expression of performance of gas analyzers. Part 6: Photometric analyzers (IEC 61207-6:1994)
LST EN 61207-3-2003 Gas analyzers. Expression of performance. Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002)
LST EN 61207-1-2010 Expression of performance of gas analyzers -- Part 1: General (IEC 61207-1:2010)
LST EN 61285-2005 Industrial-process control. Safety of analyser houses (IEC 61285:2004)
LST EN 60746-2-2004 Expression of performance of electrochemical analyzers. Part 2: pH value (IEC 60746-2:2003)
LST EN 60746-1-2004 Expression of performance of electrochemical analyzers. Part 1: General (IEC 60746-1:2003)
LST EN 61115-2001 Expression of performance of sample handling systems for process analyzers (IEC 61115:1992)
LST ISO 5530-1:2004 Wheat flour. Physical characteristics of doughs. Part 1: Determination of water absorption and rheological properties using a farinograph

Hunan Provincial Standard of the People's Republic of China, Thermal Analyzer Characteristics

DB43/T 2452-2022 General technical requirements for heat loss rate analyzer

Professional Standard - Post and Telecommunication, Thermal Analyzer Characteristics

YD/T 966-1998 Technical specification of SDH performance analyser
YD/T 860-1996 Technical conditions of error performance analyzer with or without frame structure
YD/T 991-1998 Electromagnetic compatibility limit and measuring method of digital transmission analyzer

Professional Standard - Electron, Thermal Analyzer Characteristics

SJ/Z 9076-1987 Presentation of performance of logic analyzer
SJ/Z 9126-1987 Presentation for performances of air quality infra-red analyzers
SJ/Z 3206.3-1989 Instrument and its performance requirements for determination of emision spectrum
SJ/Z 9125.1-1987 Presentation for performances of electrochemical analyzers Part 1: General rules
SJ/Z 9125.2-1987 Presentation for performances of electrochemical analyzers Part 2: pH value
SJ/Z 9125.3-1987 Presentation for performances of electrochemical analyzers Part 3: Electrolytic conductivity

IN-BIS, Thermal Analyzer Characteristics

IS 11148-1984
IS 12350-1987
IS 12705-1989
IS 12516 Pt.1-1988
IS 13673 Pt.2-1993 Expression of performance of electrochemical analyzers. Part 2: pH Value
IS 13673 Pt.1-1993 Expression of performance of electrochemical analyzers. Part 1: General
IS 13673 Pt.3-1993
IS 12803-1989

North Atlantic Treaty Organization Standards Agency, Thermal Analyzer Characteristics

STANAG 4525-2001 EXPLOSIVES, PHYSICAL/MECHANICAL PROPERTIES, THERMOMECHANICAL ANALYSIS FOR DETERMINING THE COEFFICIENT OF LINEAR THERMAL EXPANSION (TMA)

未注明发布机构, Thermal Analyzer Characteristics

BS EN 61207-7:2013(2015) Expression of performance of gas analyzers Part 7 : Tuneable semiconductor laser gas analyzers
BS 5849:1980(1999)*IEC 528:1975 Method of Expression of performance of air quality infra - red analysers [ IEC title : Expression of performance of air quality infra - red analyzers ]
DIN IEC 1342:1996 Nuclear instrumentation — Multichannel! pulse height analyzers — Main characteristics, technical requirements and test methods
BS EN 61115:1994(2000) Expression of performance of sample handling systems for process analyzers
BS EN 60746-3:2002(2003) Expression of performance of electrochemical analyzers — Part 3 : Electrolytic conductivity

Group Standards of the People's Republic of China, Thermal Analyzer Characteristics

T/ZZB 1022-2019 Portable volatile organic compounds analyzer
T/CSTM 00964-2022 General rules for performance evaluation of atomic spectrometer
T/GDCKCJH 048-2021 Performance requirements and test methods for ultraviolet analyzer

American National Standards Institute （ANSI), Thermal Analyzer Characteristics

ANSI/ASTM D3795:2000 Test Method for Thermal Flow and Cure Properties of Thermosetting Plastics by Torque Rheometer (15.04)
ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
ANSI/ASTM D6375:2009 Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) (Noack Method)
ANSI N42.23-1996 Measurement and Associated Instrumentation Quality Assurance for Radioassay Laboratories

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Thermal Analyzer Characteristics

ASHRAE 4302-1999 Measurement of Frost Characteristics on Heat Exchanger Fins Part II: Data and Analysis (RP-824)
ASHRAE AN-04-6-1-2004 Heat Transfer Analysis of a Between-Panes Venetian Blind Using Effective Longwave Radiative Properties
ASHRAE 4364-2000 Development of an In-Situ System and Analysis Procedure for Measuring Ground Thermal Properties
ASHRAE 4301-1999 Measurement of Frost Characteristics on Heat Exchanger Fins Part 1: Test Facility and Instrumentation (RP-824)
ASHRAE 4712-2004 Performance Analysis of Low-pressure Household Water Heaters
ASHRAE 4068-1997 Sensitivity Analysis for Building Thermal Loads
ASHRAE 4029-1997 Improving Thermal and Flow Properties of Chilled Water - Part 1: Material Selection and Instrument Calibration (RP-801)
ASHRAE QC-06-059-2006 Performance Analysis of Standing Column Well Ground Geat Exchanger Systems
ASHRAE ST-16-017-2016 Performance Analysis of a Ground-Source Heat Pump System Using Mine Water as Heat Sink and Source
ASHRAE 4630-2003 Performance Analysis of Axial Fans in Residential Heat Pump Systems
ASHRAE 4035-1997 Performance of Electric Power Meters and Analyzers in Adjustable-Speed Drive Applications (RP-770)
ASHRAE AN-04-6-3-2004 Calorimetric Analysis of the Solar and Thermal Performance of Windows with Interior Louvered Blinds

Taiwan Provincial Standard of the People's Republic of China, Thermal Analyzer Characteristics

CNS 14943-2005 Essential oils ? General guidance on chromatographic profiles ? Part 1: Preparation of chromatographic profiles for presentation in standards
CNS 14944-2005 Essential oils – General guidance on chromatographic profiles ? Part 2: Utilization of chromatographic profiles of samples of essential oils

Professional Standard - Geology, Thermal Analyzer Characteristics

DZ/T 0121.9-1994 Terminology of Geological Instruments Terminology of Geological Analysis Instruments and Petrophysical Properties Testing Instruments

YU-JUS, Thermal Analyzer Characteristics

JUS G.S2.512-1997 Flastics - Determination of rheologicaJ properties of thermoplastics with capillary rheometer

RO-ASRO, Thermal Analyzer Characteristics

STAS SR CEI 746-1-1995 Expression of performance of electrochemical analyzers Part 1: General

IT-UNI, Thermal Analyzer Characteristics

European Committee for Standardization (CEN), Thermal Analyzer Characteristics

HD 469 S1-1987 Expression of the properties of logic analysers
EN 16192:2011 Characterization of waste - Analysis of eluates
CEN/TS 15901-14:2016 Road and airfield surface characteristics - Part 14: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCN): ViaFriction (Road Analyser and Recorder of ViaTech AS)
CEN/TS 15901-5:2009 Road and airfield surface characteristics - Part 5: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRDK): ROAR (Road Analyser and Recorder of Norsemeter)
CEN/TS 15901-2:2009 Road and airfield surface characteristics - Part 2: Procedure for determining the skid resistance of a pavement surface using a device with longitudinal controlled slip (LFCRNL): ROAR (Road Analyser and Recorder of Norsemeter)
EN 13860-1:2003 Non destructive testing - Eddy current examination - Equipment characteristics and verification - Part 1: Instrument characteristics and verification
EN ISO 23674:2022 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
EN ISO 11132:2017 Sensory analysis - Methodology - Guidelines for monitoring the performance of a quantitative sensory panel
EN ISO 11132:2021 Sensory analysis - Methodology - Guidelines for the measurement of the performance of a quantitative descriptive sensory panel (ISO 11132:2021)
prEN ISO 23674:2021 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition - Atomic absorption spectrometry (mercury analyzer) (ISO/DIS 23674:2021)

Professional Standard - Energy, Thermal Analyzer Characteristics

NB/SH/T 0859-2013 Standard test method for the thermal stability of chemicals by thermal analysis

国家质量监督检验检疫总局, Thermal Analyzer Characteristics

SN/T 3078.2-2015 Determination of thermal stability of chemicals Part 2: Thermogravimetric analysis

Professional Standard - Aerospace, Thermal Analyzer Characteristics

QJ 3230-2005 Regulations on Compilation of Product Characteristics Classification Analysis Report

Military Standard of the People's Republic of China-General Armament Department, Thermal Analyzer Characteristics

GJB 8376-2015 Analysis method of basic hydrogen peroxide solution

RU-GOST R, Thermal Analyzer Characteristics

GOST 32334-2013 Lubricating oils. Determination of evaporation loss of by thermogravimetric analyzer (TGA) Noack method
GOST 28977-1991 Photovoltaic devices. Part 1. Measurement of photovoltaic current-voltage characteristics
GOST ISO 5530-2-2014 Wheat flour. Physical characteristics of doughs. Part 2. Determination of rheological properties using an extensograph
GOST R 8.924-2016 State system for ensuring the uniformity of measurements. Ozone analyzers. Verification procedure

Shaanxi Provincial Standard of the People's Republic of China, Thermal Analyzer Characteristics

DB61/T 1520-2021 Specification for performance evaluation of real-time fluorescence quantitative PCR analyzer

KR-KS, Thermal Analyzer Characteristics

KS P ISO 6360-7-2020 Dentistry — Number coding system for rotary instruments —Part 7: Specific characteristics of mandrels and special instruments
KS P ISO 6360-6-2020 Dentistry — Number coding system for rotary instruments —Part 6: Specific characteristics of abrasive instruments
KS P ISO 6360-4-2020 Dentistry — Number coding system for rotary instruments —Part 4: Specific characteristics of diamond instruments
KS D ISO 15632-2018 Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
KS C IEC 60216-3-2017 Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance
KS P ISO 6360-1-2020 Dentistry — Number coding system for rotary instruments —Part 1: General characteristics

Standard Association of Australia （SAA）, Thermal Analyzer Characteristics

AS/NZS 3580.12.1:2001 Methods for sampling and analysis of ambient air - Determination of light scattering - Integrating nephelometer method

Japanese Industrial Standards Committee (JISC), Thermal Analyzer Characteristics

JIS R 1618:2002 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
JIS K 6296-2:2023 Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 2: Oscillating disc curemeter
JIS K 6296-3:2023 Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 3: Rotorless curemeter

AASHTO - American Association of State Highway and Transportation Officials, Thermal Analyzer Characteristics

TP 63-2009 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
T 340-2010 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
TP 63-2007 Standard Method of Test for Determining Rutting Susceptibility of Hot-Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)

The American Road & Transportation Builders Association, Thermal Analyzer Characteristics

AASHTO T 340-2010 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)

Institute of Electrical and Electronics Engineers (IEEE), Thermal Analyzer Characteristics

IEEE Std 1554-2005 IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
IEEE 1554-2005 IEEE Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis
IEEE Std P1554/D15d, Apr 2005 IEEE Draft Recommended Practice for Inertial Sensor Test Equipment, Instrumentation, Data Acquisition, and Analysis

SAE - SAE International, Thermal Analyzer Characteristics

SAE J2992-2020 FTIR Gas Analyzer Performance Evaluation / Qualification for Automotive Testing
SAE J2992-2015 FTIR Gas Analyzer Performance Evaluation / Qualification for Automotive Testing

ZA-SANS, Thermal Analyzer Characteristics

SANS 15239:2006 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers

VN-TCVN, Thermal Analyzer Characteristics

TCVN 7848-2-2015 Wheat flour - Physical characteristics of doughs .Part 2:Determination of rheological properties using an extensograph
TCVN 7848-1-2015 Wheat flour - Physical characteristics of doughs .Part 1:Determination of water absorption and rheological properties using a farinograph

Professional Standard - Public Safety Standards, Thermal Analyzer Characteristics

GA/T 76-1994 Test method for thermal analysis of the constant temperature stability of substances

BE-NBN, Thermal Analyzer Characteristics

NBN C 73-335-35 ADD 2-1994
NBN X 10-002-1986 Specifications relating to the appliances and methods

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Thermal Analyzer Characteristics

ASHRAE OR-05-10-2-2005 Thermal and Hydraulic Characteristics of Brazed Plate Heat Exchangers - Part I: Review of Single-Phase and Two-Phase Adiabatic and Flow Boiling Characteristics

Professional Standard - Commodity Inspection, Thermal Analyzer Characteristics

SN/T 3078.1-2012 Guide for assessing thermal stability of chemicals.Part 1:Methods of accelerating rate calorimetry

Professional Standard - Electricity, Thermal Analyzer Characteristics

DL/T 2161-2020 Technical Guidelines for Classification and Characteristic Analysis of Power Demand Side Resources

ES-AENOR, Thermal Analyzer Characteristics

UNE 87-017-1992 Sensory analysis. Methodology. Flavour profile methods

American Society of Mechanical Engineers (ASME), Thermal Analyzer Characteristics

ASME STP-PT-096-2022 Elevated Temperature Material Property Compilation for Design-By Analysis

(U.S.) Ford Automotive Standards, Thermal Analyzer Characteristics

FORD WSS-M98D34-A-2010 THERMOPLASTIC POLYURETHANE (TPU) FORMED INSTRUMENT PANEL ASSEMBLY ***TO BE USED WITH FORD WSS-M99P1111-A***

Malaysia Standards, Thermal Analyzer Characteristics

MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis

国家药监局, Thermal Analyzer Characteristics

YY/T 1789.5-2023 Methods for performance evaluation of in vitro diagnostic test systems Part 5: Analytical specificity

Canadian Standards Association (CSA), Thermal Analyzer Characteristics

CSA C22.2 No.60601-2-39-02-2002 Appareils 閘ectrom閐icaux Partie 2-39: R鑗les particuli鑢es de s閏urit?pour les appareils de dialyse p閞iton閍le Premiere Edition;

AT-ON, Thermal Analyzer Characteristics

OENORM EN ISO 23674:2021 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition - Atomic absorption spectrometry (mercury analyzer) (ISO/DIS 23674:2021)