ZH
RU
ES
standard value
standard value, Total:68 items.
In the international standard classification, standard value involves: Piezoelectric and dielectric devices, Electric filters, Aircraft and space vehicles in general, Quality, Acoustics and acoustic measurements, Horology, Linear and angular measurements, Analytical chemistry, Quantities and units, Technical product documentation, Energy and heat transfer engineering in general, Geology. Meteorology. Hydrology.
YU-JUS, standard value
VE-FONDONORMA, standard value
AT-ON, standard value
BE-NBN, standard value
British Standards Institution (BSI), standard value
- BS EN 61337-1-1:1998 Filters using waveguide type dielectric resonators - General information, standard values and test conditions - General information and standard values
- BS EN 60689:2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
International Electrotechnical Commission (IEC), standard value
- IEC 61019-1-1:1990 Surface acoustic wave (SAW) resonators; part 1: general information, standard values and test conditions; section I: general information and standard values
- IEC 61337-1-1:1995 Filters using waveguide type dielectric resonators - Part 1: General information, standard values and test conditions - Section 1: General information and standard values
- IEC 60862-1:1989 Surface acoustic wave (SAW) filters; part 1: general information, standard values and test conditions; chapter I: general information and standard values; chapter II: test conditions
- IEC 60368-1:1992 Piezoelectric filters; part 1: general information, standard values and test conditions
- IEC 60689:1980 Measurements and test methods for 32 kHz quartz crystal units for wrist watches and standard values
- IEC 60122-1:1976 Quartz crystal units for frequency control and selection. Part 1 : Standard values and test conditions
- IEC 60689:2008 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
- IEC 61019-1-2:1993 Surface acoustic wave (SAW) resonators; part 1: general information, standard values and test conditions; section 2: test conditions
Society of Automotive Engineers (SAE), standard value
- SAE ARP866A-1975 Standard Values of Atmospheric Absorption as a Function of Temperature and Humidity
- SAE ARP866-1964 STANDARD VALUES OF ATMOSPHERIC ABSORPTION AS A FUNCTION OF TEMPERATURE AND HUMIDITY FOR USE IN EVALUATING AIRCRAFT FLYOVER NOISE
Japanese Industrial Standards Committee (JISC), standard value
- JIS Z 9042:1962 Significance test of difference between the population mean and the standard (standard deviation known, one-sided)
- JIS Z 9043:1962 Significance test of difference between the population mean and the standard (standard deviation known, two-sided)
- JIS Z 9044:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, one-sided)
- JIS Z 9045:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, two-sided)
RO-ASRO, standard value
Professional Standard - Civil Aviation, standard value
- MH/T 9002-2008 Standard values of atmospheric noise absorption as a function of temperature and humidity
CENELEC - European Committee for Electrotechnical Standardization, standard value
- EN 61337-1-1:1997 Filters Using Waveguide Type Dielectric Resonators Part 1: General Information@ Standard Values and Test Conditions Section 1: General Information and Standard Values
- EN 60689:2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
SAE - SAE International, standard value
- SAE ARP866B-2012 Standard Values of Atmospheric Absorption as a Function of Temperature and Humidity
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, standard value
- GB/T 22318.1-2008 Surface acoustic wave(SAW)resonators.Part1-1:General information and standard values
IT-UNI, standard value
Professional Standard - Electron, standard value
- SJ/T 10015-2013 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
- SJ/Z 9153.1-1987 Piezoelectric filter Part 1: Comprehensive information, standard values and test conditions
- SJ/Z 9162-1987 Measuring methods, test methods and standard values of 32KHz quartz crystal elements for wrist watches
- SJ/Z 9152.1-1987 Quartz crystal elements for frequency control and selection Part 1: Standard values and test conditions
GOSTR, standard value
- GOST R 58558-2019 Wooden structures. Glued rods. Test methods for determining standard values of mechanical characteristics
- GOST R 58459-2019 Timber structures. Determination of the normative and calculated values of the mechanical properties of wood and materials based on it
- GOST IEC 60059-2017 Electric current. Standard rated values according to IEC
Taiwan Provincial Standard of the People's Republic of China, standard value
- CNS 13212-1993 Surface Acoustic Wave (SAW) Resonators Part 1: General Information and Standard Values
- CNS 12485-1989 Guide to the Choice of Series of Preferred Numbers and of Series Containing Morerounded Values of Preferred Numbers
ES-UNE, standard value
- UNE-EN 60689:2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values (Endorsed by AENOR in June of 2009.)
RU-GOST R, standard value
- GOST R 53440-2009 Basic norms of interchangeability. Geometrical product specifications. Standard rates of taper and cone angles
- GOST 28947-1991 Glass Hydrometers. Conventional value for tne thermal cubic expasion coefficient (for use in tne preparation of measurement table for liquids)
- GOST R 51380-1999 Energy conservation. Methods of assurance for energy efficiency indicators of energy consumed products to its normative values. General requirements
Danish Standards Foundation, standard value
- DS/IEC 122-1:1985 Quartz crystal units for frequency control and selection. Part 1: Standard values and test conditions with Amendment No.1 (1983)
- DS/EN 60689:2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
Korean Agency for Technology and Standards (KATS), standard value
- KS A 3252-2002 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
- KS A 3252-1985 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
- KS C IEC 60689:2016 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
- KS C IEC 60689-2016(2021) Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
German Institute for Standardization, standard value
- DIN EN 60689:2009-08 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values (IEC 60689:2008); German version EN 60689:2009
- DIN IEC 60642:1988 Piezoelectric ceramic resonators and resonator units for frequency control and selection; standard values and conditions; measuring and test conditions; identical with IEC 60642, edition 1979
CH-SNV, standard value
Lithuanian Standards Office , standard value
- LST EN 60689-2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values (IEC 60689:2008)
SE-SIS, standard value
Association Francaise de Normalisation, standard value
- NF C93-610*NF EN 60689:2014 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
PK-PSQCA, standard value
- PS 103-1960 PAKISTAN STANDARD SPECIFICATION FOR METHODS OF ROUNDING OFF NUMERICAL VALUES
KR-KS, standard value
- KS C IEC 60689-2016 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
Institute of Electrical and Electronics Engineers (IEEE), standard value
- AIEE No.3-1943 AIEE Standards for Guiding Principles for the Selection of Reference Values for Electrical Standards
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, standard value
AGMA - American Gear Manufacturers Association, standard value
KE-KEBS, standard value
- KS 04-196-1979 KENYA STANDARD PREFERRED VALUES FOR RESISTORS AND CAPACITORS
(U.S.) Telecommunications Industries Association , standard value
- TIA TSB-58-H-2007 Administration of Parameter Value Assignment of cdma2000 Spread Spectrum Standards
TIA - Telecommunications Industry Association, standard value
- TSB-58-H-2007 Administration of Parameter Value Assignment of cdma2000 Spread Spectrum Standards
- TSB-58-I-2010 Administration of Parameter Value Assignment of cdma2000 Spread Spectrum Standards
Standard Association of Australia (SAA), standard value
- AS 1259.2:1990 Acoustics - Sound level meters - Integrating - Averaging