ZH
RU
ES

filler

filler, Total:500 items.

In the international standard classification, filler involves: Valves, Shipbuilding and marine structures in general, Products of the textile industry, Equipment for the chemical industry, Paints and varnishes, Farming and forestry, Home textiles. Linen, Packaging and distribution of goods in general, Insulating materials, Rubber and plastics products, Products of non-ferrous metals, Textile fibres, Surface treatment and coating, Dentistry, Construction materials, Ceramics, Paint ingredients, Refrigerating technology, Measurement of volume, mass, density, viscosity, Paper and board, Fluid power systems, Medical equipment, Burners. Boilers, Cases. Boxes. Crates, Road engineering, Seals, glands, Furniture, Transport, Electrical wires and cables, Internal combustion engines for road vehicles, Iron and steel products, Aircraft and space vehicles in general, Optics and optical measurements, Pharmaceutics, Leather technology, Protection of and in buildings, Pipeline components and pipelines, Non-metalliferous minerals, Elements of buildings, Wastes, Aerospace fluid systems and components, Quantities and units, Road vehicle systems, Paper production processes, Materials for aerospace construction, Domestic electrical appliances in general, Welding, brazing and soldering, Components for aerospace construction, Plastics, Vocabularies, Raw materials for rubber and plastics, Materials for the reinforcement of composites, Reinforced plastics, Power stations in general, Analytical chemistry, Protective equipment, Interior finishing, Water quality, Metalliferous minerals.


Defense Logistics Agency, filler

Professional Standard - Machinery, filler

Group Standards of the People's Republic of China, filler

CZ-CSN, filler

AENOR, filler

Society of Automotive Engineers (SAE), filler

German Institute for Standardization, filler

  • DIN 3780:1954-09 Seals and Packings; Stuffing Box Diameters and Related Packing Widths, Design Sheet
  • DIN 3780:1954 Seals and Packings; Stuffing Box Diameters and Related Packing Widths, Design Sheet
  • DIN VDE 0291-1:1972 Specifications for filling compounds for cable accessories and for scalding compounds; Hot-cast filling compounds, filling-compounds for cold pressing-in, two-component cold-cast filling compounds and scalding compounds
  • DIN 53163:1988 Testing of pigments and extenders; determination of lightness of extenders and white pigments in powder form
  • DIN 52096:2016-11 Testing of filler for road construction - Stiffening effect of filler on bitumen - Stabilization index
  • DIN 52096:2016 Testing of filler for road construction - Stiffening effect of filler on bitumen - Stabilization index
  • DIN 52096:1987 Testing of fillers for road construction; testing the stiffening action of fillers on bitumen
  • DIN EN 16566:2014-08 Paints and varnishes - Fillers for internal and/or external works - Adaption of fillers to European standards; German version EN 16566:2014
  • DIN 65064:1998 Aerospace - Potting compounds for care and edge filling for sandwich structures - Technical specification
  • DIN EN 16752:2015 Centrifugal pumps - Test procedure for seal packings
  • DIN EN 16752:2015-11 Centrifugal pumps - Test procedure for seal packings; German version EN 16752:2015
  • DIN EN 16566:2014 Paints and varnishes - Fillers for internal and/or external works - Adaption of fillers to European standards; German version EN 16566:2014
  • DIN 6318:2002-10 Stepped packing blocks as support for clamps

YU-JUS, filler

  • JUS B.B8.101-1982 Testing of mineral filler. The determination ofdensity of filler.
  • JUS B.B8.102-1982 Testing of mineral filler. The determination of voids of dry compacted filler (Rigden method)
  • JUS G.C0.012-1991 Plastics - Symbols - Fillers and reinforcing materials
  • JUS B.B8.103-1982 Testing of mineral filler. The determination of external appearance
  • JUS B.B8.104-1982 Testing of mineral filler. The determination of hardenings index
  • JUS B.B8.090-1990 Calcium carbonate fillers. Determination of untamped density

Japanese Industrial Standards Committee (JISC), filler

Professional Standard - Chemical Industry, filler

机械电子工业部, filler

Korean Agency for Technology and Standards (KATS), filler

TH-TISI, filler

HU-MSZT, filler

SE-SIS, filler

  • SIS 87 21 02-1973 Bandage wadding
  • SIS 87 21 03-1973 Cosmetic wadding
  • SIS CSB-65-1965 Bandage and cosmetic wadding
  • SIS 87 21 01-1973 Bandage and cosmetic wadding. General requirements
  • SIS CSB-64-1965 Bandage and cosmetic wadding General requirements
  • SIS SS 3127-1978 Gland packings for rotating shafts - Lubricated, braided or plaited cotton and ramie packing with square cross section, temperature 80 °C maximum
  • SIS SS 3128-1978 Gland packings for rotating shafts — Lubricated braided or plaited hamp, flax and ramie packing with square cross section, temperature 65 C maximum

ZA-SANS, filler

GM Europe, filler

IT-UNI, filler

TR-TSE, filler

Professional Standard - Environmental Protection Certification Specification , filler

PL-PKN, filler

Taiwan Provincial Standard of the People's Republic of China, filler

工业和信息化部, filler

GM North America, filler

BE-NBN, filler

Association Francaise de Normalisation, filler

  • NF S91-215:1992 DENTISTRY. RESIN-BASED FILLING MATERIALS. (EUROPEAN STANDARD EN 24049).
  • NF T30-608:2014 Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to european standards
  • NF J25-305:1993 Shipbuilding. Special accessories for marine fittings. Stuffing box. General desigh features of the stuffing box.
  • NF T30-609*NF EN 16566:2014 Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to european standards
  • NF B57-057*NF ISO 4708:2002 Composition cork - Gasket material - Test methods
  • NF J24-100:1993 Shipbuilding. Filler and sampling plugs.
  • NF P85-412:1988 JOINTING PRODUCTS. SEALING JOINT BETWEEN CASEMENT AND FRAME FOR WOOD JOINERY. RUBBER-BASED MATERIALS.
  • NF E44-173*NF EN 16752:2015 Centrifugal pumps - Test procedure for seal packings
  • NF EN 16752:2015 Pompes centrifuges - Procédure d'essai pour garnitures tressées

Professional Standard - Building Materials, filler

Canadian General Standards Board （CGSB), filler

RO-ASRO, filler

Professional Standard - Light Industry, filler

国家市场监督管理总局、中国国家标准化管理委员会, filler

GM Daewoo, filler

国家发展和改革委员会, filler

U.S. Air Force, filler

Professional Standard-Ships, filler

FI-SFS, filler

IN-BIS, filler

BELST, filler

International Federation of Trucks and Engines, filler

未注明发布机构, filler

KR-KS, filler

American National Standards Institute （ANSI), filler

Indonesia Standards, filler

  • SNI 12-6094-1999 Coconut fibre for upholstery filler
  • SNI 06-6723-2002 Specification of mineral filler for bituminous paving mixtures
  • SNI 03-4815-1998 Specification for preformed expansion joint fillers for concrete paving and structural construction
  • SNI 13-4693-1998 Quality requirement of calcium carbonate powder for paper filler

U.S. Military Regulations and Norms, filler

SAE - SAE International, filler

AASHTO - American Association of State Highway and Transportation Officials, filler

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., filler

  • SP-143-2018 Live-Loaded Valve Stem Packing Systems
  • SP-143-2012 Live-Loaded Valve Stem Packing Systems
  • SP-132-2004 Compression Packing Systems for Instrument Valves
  • SP-132-2010 Compression Packing Systems for Instrument Valves
  • SP-132-2016 Compression Packing Systems for Instrument Valves

工业和信息化部/国家能源局, filler

British Standards Institution (BSI), filler

  • BS EN 16566:2014 Paints and varnishes. Fillers for internal and/or external works. Adaptation of fillers to European standards
  • BS EN 16752:2015 Centrifugal pumps. Test procedure for seal packings

(U.S.) Ford Automotive Standards, filler

United States Navy, filler

RU-GOST R, filler

  • GOST 12923-1982 Cellulose wadding medical. Specifications
  • GOST 25984.5-1983 Chrysotile asbestos. Method for determination of bulk density
  • GOST 5152-1984 Packings. Specifications
  • GOST 23233-1978 Aggregate cellular paper. General technical requirements
  • GOST 19487-1974 Pigments and extenders inorganic. Terms and definitions
  • GOST R 57914-2017 Polimer composites. Prepregs and premixes. Determination of resin, reinforcing filler and mineral filler content by dissolution methods
  • GOST 32496-2013 Fillers porous for light concrete. Specifications
  • GOST 16873-1992 Inorganic pigments and extenders. Methods for colour and whiteness determination

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), filler

Aerospace Industries Association, filler

NO-SN, filler

  • NS 2716-1982 Marine industry - Stuffing boxes for rudderstocks
  • NS 2717-1982 Marine industry - Gaskets for stuffing box foundations

Professional Standard - Military and Civilian Products, filler

GM Holden Ltd, filler

US-GSA, filler

Professional Standard - Traffic, filler

Professional Standard - Coal, filler

International Organization for Standardization (ISO), filler

  • ISO 4709:1985 Cork; Composition cork gasket material; Specifications
  • ISO 4708:1985 Cork; Composition cork gasket material; Test methods

(U.S.) Builders Hardware Manufacturers Association, filler

Aerospace Industries Association/ANSI Aerospace Standards, filler

NZ-SNZ, filler

  • NZS 3125:1991 Portland-Limestone Filler Cement (Amemdment 1 May 1996)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, filler

General Motors Corporation (GM), filler

AIA/NAS - Aerospace Industries Association of America Inc., filler

API - American Petroleum Institute, filler

ES-AENOR, filler

American Society for Testing and Materials (ASTM), filler

  • ASTM D5871-07 Standard Specification for Benzene for Cyclohexane Feedstock
  • ASTM C1081-98(2003) Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
  • ASTM C1081-98 Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
  • ASTM C1081-98(2003)e1 Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
  • ASTM F2440-11 Standard Specification for Indoor Wall/Feature Padding
  • ASTM F2440-18 Standard Specification for Indoor Wall/Feature Padding
  • ASTM F146-01 Standard Test Methods for Fluid Resistance of Gasket Materials
  • ASTM F146-98e1 Standard Test Methods for Fluid Resistance of Gasket Materials
  • ASTM C515-95 Standard Specification for Chemical-Resistant Ceramic Tower Packings
  • ASTM F1007-18(2022) Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
  • ASTM C515-13(2018) Standard Specification for Chemical-Resistant Ceramic Tower Packings

GM Global, filler

ES-UNE, filler

Professional Standard - Energy and Power Planning, filler

  • NDGJ 88-1989 Technical regulations for cooling tower plastic water spray filler

Military Standards (MIL-STD), filler

Hubei Provincial Standard of the People's Republic of China, filler

  filler, stuffing cap, protein filler, coupling packing, Detection packing, Nickel filler, Nylon packing, How to pack the packed column, Nylon packing, Packing analysis, Filler size, carrier filler, paint filler, packing type, filler chalk, Washable packing, polyurethane filler, Silicone packing, ni filler+, fiber filler.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved