ZH
RU
ES

Material Validation Analysis

Material Validation Analysis, Total:498 items.

In the international standard classification, Material Validation Analysis involves: Testing of metals, Nuclear energy engineering, Valves, Water quality, Analytical chemistry, Fuels, Animal feeding stuffs, Particle size analysis. Sieving, Protection against fire, Refractories, Non-ferrous metals, Materials and articles in contact with foodstuffs, Quality, Mechanical testing, Commercial vehicles, Insulating materials, Cereals, pulses and derived products, Glass, Leather technology, Metalliferous minerals, Industrial furnaces, Ceramics, Raw materials for rubber and plastics, Welding, brazing and soldering, Measurement of volume, mass, density, viscosity, Thermodynamics and temperature measurements, Fluid power systems, Materials for aerospace construction, Space systems and operations, Road vehicles in general, Packaging materials and accessories, Sensory analysis, Products of the chemical industry, Environmental protection, Pharmaceutics, Natural gas, Tobacco, tobacco products and related equipment, General methods of tests and analysis for food products, Equipment for the chemical industry, Organic chemicals, Shipbuilding and marine structures in general, Products of the textile industry, Spices and condiments. Food additives, Reinforced plastics, Ferrous metals, Protection against dangerous goods, Plastics, Magnetic materials, Products of non-ferrous metals, Electronic tubes, Metrology and measurement in general, Medical sciences and health care facilities in general, Inorganic chemicals, Biology. Botany. Zoology, Construction materials, Vocabularies, Electrical engineering in general, Measurement of fluid flow, Microbiology, Waxes, bituminous materials and other petroleum products, Road engineering.

Professional Standard - Agriculture, Material Validation Analysis

GB 31604.59-2023 National Food Safety Standard General Principles for Validation of Chemical Analysis Methods for Food Contact Materials and Products
361药典三部-2020 Guideline 9101 Guidelines for Validation of Analytical Methods
334药典四部-2020 9000 Guidelines 9101 Guidelines for Validation of Analytical Methods
CNAS-TRL-011-2020 Guidelines for Validation and Validation of Chemical Analysis Methods for Light Industrial Products

German Institute for Standardization, Material Validation Analysis

DIN-Fachbericht CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations; English version CEN/TR 15356-1:2006
DIN 51220:2022-10 Materials testing machines - General requirements, calibration and verification of materials testing machines
DIN CEN/TS 17174:2018-10*DIN SPEC 10796:2018-10 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals; German version CEN/TS 17174:2018
DIN CEN/TS 17455:2020-07 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins; German version CEN/TS 17455:2020
DIN EN ISO 148-2:2017-05 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016); German version EN ISO 148-2:2016
DIN EN ISO 14577-2:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015); German version EN ISO 14577-2:2015
DIN EN ISO 6506-2:2019-03 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2017); German version EN ISO 6506-2:2018
DIN EN ISO 6507-2:2018-07 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018); German version EN ISO 6507-2:2018
DIN EN ISO 7500-1 Beiblatt 3:1999-11 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines; verification and calibration of the force-measuring system; general for requirements, verification and calibration of fatigue testing ...
DIN CEN/TS 16800:2016-03*DIN SPEC 38402-61:2016-03 Guideline for the validation of physico-chemical analytical methods (CEN/TS 16800:2015); German version CEN/TS 16800:2015
DIN 51074-1:1971 Testing of ceramic materials; chemical analysis of ceramic materials containing chromium oxide, general instructions and test report
DIN EN ISO 7500-1 Beiblatt 4:2013-03 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system; Supplement 4: Information for taking the uncertainty into account regardi...
DIN EN ISO 7500-2:2007-04 Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006); German version EN ISO 7500-2:2006
DIN 51074-2:1971 Testing of ceramic material; chemical analysis of ceramic materials containing chromium oxide, methods of dissolution
DIN EN ISO 4545-2:2018-07 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2017); German version EN ISO 4545-2:2018
DIN 51079-1:2004 Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 1: Decomposition with sodium carbonate and boric acid
DIN 51079-2:2004 Testing of ceramic materials - Chemical analysis of silicon carbide used as raw material and as constituent in materials - Part 2: Pressure decomposition with acid
DIN 10955:2004 Sensory analysis - Testing of packaging materials and packages for foodstuffs
DIN EN ISO 7500-1 Beiblatt 2:2022-06 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 2: General for requirements, verification and...
DIN EN ISO 6508-2:2022-12 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO/DIS 6508-2:2022); German and English version prEN ISO 6508-2:2022 / Note: Date of issue 2022-11-18*Intended as replacement for DIN...
DIN EN ISO 6508-2:2015-06 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 / Note: To be replaced by DIN EN ISO 6508-2 (2022-12).
DIN EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004); German version EN ISO 7500-1:2004
DIN 51083-3:2004 Testing of ceramic materials - Chemical analysis of alumosilicates - Part 3: Decomposition methods
DIN EN ISO 7500-1:2018-06 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018); German version EN ISO 7500-1:2018
DIN EN ISO 10564:1997 Soldering and brazing materials - Methods for the sampling of soft solders for analysis (ISO 10564:1993); German version EN ISO 10564:1997
DIN 53477:1992 Testing of plastics; determination of particle size distribution of moulding materials by dry sieving analysis
DIN 53477:2018 Testing of plastics - Determination of particle size distribution of moulding materials by dry sieving analysis
DIN EN ISO 6506-2:2023-11 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO/DIS 6506-2:2023); German and English version prEN ISO 6506-2:2023 / Note: Date of issue 2023-10-20*Intended as replacement for DIN EN ISO 6506-2 ...
DIN EN 10178:1990 Chemical analysis of ferrous materials; determination of niobium in steels; spectrophotometric method; german version EN 10178:1989
DIN 51941-1:1994 Testing of carbon materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
DIN EN ISO 7500-1 Beiblatt 3:2023-03 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 3: General information for requirements, veri...
DIN EN ISO 376:2011-09 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011); German version EN ISO 376:2011 / Note: DIN EN ISO 376 (2005-02) remains valid alongside this standard until 2011-12-31.

British Standards Institution (BSI), Material Validation Analysis

BS PD CEN/TR 10350:2009 Analysis of steels and irons — Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
BS PD CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food — Part 1: General considerations
BS ISO 11726:2005 Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
BS PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
PD CEN/TS 17455:2020 Animal feeding stuffs. Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
BS 1902 Sec.2.2:1974 Methods of testing refractory materials. Chemical analysis (wet methods). Chemical analysis of chrome-bearing materials
BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
BS ISO 11726:2017 Tracked Changes. Solid mineral fuels. Guidelines for the validation of alternative methods of analysis
BS PD CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods
BS PD CEN/TS 16800:2020 Guideline for the validation of physico-chemical analytical methods
BS ISO 23788:2012 Metallic materials. Verification of the alignment of fatigue testing machines
BS 1902-9.1:1987 Methods of testing refractory materials - Chemical analysis by instrumental methods - Analysis of alumino-silicate refractories by X-ray fluorescence
BS EN ISO 7500-2:2006 Metallic materials. Verification of static uniaxial testing machines - Tension creep testing machines. Verification of the applied force
PD ISO/TR 16268:2009 Surface chemical analysis. Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
18/30355730 DC BS EN 62737. Calibration and Validation of Process Analysers
BS 1902-9.2:1987 Methods of testing refractory materials - Chemical analysis by instrumental methods - Analysis of silica refractories by X-ray fluorescence
BS EN 16602-70-45:2014 Space product assurance. Mechanical testing of metallic materials
BS ISO 12107:2003 Metallic materials - Fatigue testing - Statistical planning and analysis of data
PD ISO/TS 22176:2020 Cosmetics. Analytical methods. Development of a global approach for validation of quantitative analytical methods
BS EN ISO 6506-2:2014 Metallic materials. Brinell hardness test. Verification and calibration of testing machines
BS EN ISO 6507-2:2006 Metallic materials. Vickers hardness test. Verification and calibration of testing machines
BS EN ISO 6506-2:2005 Metallic materials - Brinell hardness test - Verification and calibration of testing machines
BS EN ISO 16859-2:2015 Metallic materials. Leeb hardness test. Verification and calibration of the testing devices
BS EN 10002-2:1992(1998) Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
BS EN ISO 376:2004 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
BS 1902 Sec.9.1:1987 Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of alumino-silicate refractories by X-ray fluorescence
BS ISO 7210:2013 Routine analytical cigarette-smoking machine. Additional test methods for machine verification
PD CEN ISO/TR 24094:2007 Analysis of natural gas. Validation methods for gaseous reference materials
BS ISO 2943:1999 Hydraulic fluid power. Filter elements. Verification of material compatibility with fluids
BS ISO 2943:1998 Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids
BS 1902 Sec.9.2:1987 Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of silica refractories by X-ray fluorescence
BS EN 60706-3:2006 Maintainability of equipment - Verification and collection, analysis and presentation of data
BS ISO 16779:2015 Sensory analysis. Assessment (determination and verification) of the shelf life of foodstuffs
BS ISO 12828-1:2011 Validation method for fire gas analysis. Limits of detection and quantification
BS EN ISO 148-2:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Verification of testing machines
BS EN ISO 6506-2:1999 Metallic materials - Brinell hardness test - Verification and calibration of Brinell hardness testing machines
BS DD 250:1999 Road materials - Test method for the analysis of bituminous mixtures by ignition
BS 1902-9.3:1998 Methods of testing refractory materials - Chemical analysis by instrumental methods - Determination of chromium (VI)
BS EN 14090:2002 Space product assurance - Flammability testing for the screening of space materials

Professional Standard - Nuclear Industry, Material Validation Analysis

EJ/T 1084-1998 Nondestructive assay measurement control and assurance for nuclear materials
EJ/T 1083-1998 Measurement control program of analytical chemistry laboratory for nuclear materials
EJ/T 1083-2012 Nuclear Material Analytical Chemistry Laboratory Measurement Control Program
EJ/T 20162-2018 Dissolution method of plutonium material analysis sample

TR-TSE, Material Validation Analysis

TS 286-1965 VERIFICATION OF MATERIALS TESTING MACHINES
TS 3609-1981 HYDRAULIC FLUID POWER — FILTER ELEMANTS — VERIFICATION OF MATERIAL COMPATIBILITY WITH FLUIDS

European Committee for Standardization (CEN), Material Validation Analysis

PD CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
EN ISO 7500-2:1999 Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 2: Tension Creep Testing Machines - Verification of the Applied Load ISO 7500-2: 1996
EN ISO 7500-2:2006 Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006)
PD CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods
PD CEN/TS 16800:2020 Guideline for the validation of physico-chemical analytical methods
EN ISO 4545-2:2018
PD CEN/TR 10350:2009 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN 10002-2:1991 Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
EN 10002-4:1994 Metallic Materials - Tensile Test - Part 4: Verification of Extensometers Used in Uniaxial Testing
EN ISO 7500-1:1999 Metallic Materials - Verification of Static Uniaxial Testing Machines - Part 1: Tension/Compression Testing Machines ISO 7500-1:1999
EN ISO 7500-1:2015 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force- measuring system (ISO 7500-1:2015)
CEN/TR 16059:2010 Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins
EN ISO 376:2002 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines ISO 376: 1999; Supersedes EN 10002-3: 1994
EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
EN ISO 4545-2:2005 Metallic materials Knoop hardness test Part 2: Verification and calibration of testing machines
EN 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
EN ISO/TR 24094:2007 Analysis of natural gas - Validation methods for gaseous reference materials
CEN ISO/TR 24094:2007 Analysis of natural gas - Validation methods for gaseous reference materials
CEN/TR 10345:2013 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
EN ISO 10564:1997 Soldering and Brazing Materials - Methods for the Sampling of Soft Solders for Analysis ISO 10564: 1993
EN ISO 7500-1:2018 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
EN ISO 16140-5:2020 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)

Korean Agency for Technology and Standards (KATS), Material Validation Analysis

KS D ISO 14595:2018 Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials(CRMs)
KS A ISO GUIDE 32-2005(2015) Calibration in analytical chemistry and use of certified reference materials
KS E ISO 11726:2007 Solid mineral fuels－Guidelines for the validation of alternative methods of analysis
KS E ISO 11726:2018 Solid mineral fuels — Guidelines for the validation of alternative methods of analysis
KS B ISO 14577-2-2004(2009) Metallic materials-instrumented indentation test for hardness and materials parameters－Part 2：Verification and calibration of testing machines
KS L 3523-2006(2021) Testing methods for sieve analysis and water content of refractory materials
KS B 5526-2003(2018)
KS B ISO 148-2-2004(2009) Metallic materials－Charpy pendulum impact test－Part 2：Verification of test machines
KS L 3128-2-2012 Chemical analysis of refractory products-Part 2:Silica refractories
KS B 5528-1993 Load calibration devices for verifying material testing machines
KS E ISO 11459:2003 Iron ores－Certified reference materials－Preparation and certification for use in chemical analysis
KS D 2607-2005 Methods for chemical analysis of tungsten materials
KS D 2607-1993 Methods for chemical analysis of tungsten materials
KS D 2607-2015 Methods for chemical analysis of tungsten materials
KS D 2608-2005 Methods for chemical analysis of molybdenum materials
KS D 2608-1993 Methods for chemical analysis of molybdenum materials
KS D 2608-2015 Methods for chemical analysis of molybdenum materials
KS D 2607-2020 Methods for chemical analysis of tungsten materials
KS D 2608-2020 Methods for chemical analysis of molybdenum materials
KS B ISO 4546-2003(2018)
KS L 3128-5-2012 Chemical analysis of refractory products-Part 5:Chrome-magnesia refractories
KS B ISO 7500-2-2004(2009) Metallic materials－Verification of static uniaxial testing machines－Part 2：Tension creep testing machines－Verification of the applied load
KS L 3128-3-2012 Chemical analysis of refractory products-Part 3:High alumina refractories
KS B ISO TR 14936:2003 Metallic materials－Strain analysis report
KS D 2589-2005 Methods for chemical analysis of gold brazing filler metals
KS L 3137-2006 Chemical analysis of zircon refractories
KS L 3410-1995 Chemical analysis for high purity carbon materials
KS D 1949-1999 Method for determination of tungsten in nickel materials for electron tubes
KS D 1976-2002 Methods for determination of manganese in nickel materials for electron tubes
KS L 2316-2010(2020) Volumetric glass material for chemical analysis
KS B ISO TR 14936-2003(2018)
KS D 1976-1982 Methods for determination of manganese in nickel materials for electron tubes
KS L 3137-1986 Chemical analysis of zircon refractories
KS B ISO 10564:2005 Soldering and brazing materials－Methods for the sampling of soft solders for analysis
KS I ISO 2943:2005 Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids
KS B 5528-2003(2018)
KS B ISO 12107:2004 Metallic materials－Fatigue testing－Statistical planning and analysis of data
KS B ISO 12107-2004(2019) Metallic materials－Fatigue testing－Statistical planning and analysis of data
KS B ISO 376-2002(2012) Metallic materials－Calibration of force－proving instruments used for the verification of uniaxial testing machines
KS M ISO 12787:2014 Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
KS M ISO 12787-2014(2019) Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
KS B ISO 7500-1-2003(2008) Metallic materials－Verification of static uniaxial testing machines－Part 1：Tension/compression testing machines－Verification and calibration of the force-measuring system
KS L 4005-2006(2021) Sieve analysis of nonplastic ceramic materials
KS I ISO 24094-2010(2016) Analysis of natural gas－Validation methods for gaseous reference materials
KS B 0539-2005 Methods for chemical analysis of palladium brazing filler metals
KS D 2609-2008 Methods for chemical analysis of thoriated tungsten materials
KS L 5208-2016 Chemical analysis of chrome ore for refractories
KS L 2316-1995 Volumetric glass material for chemical analysis
KS D 2052-1999(2004) METHODS FOR CHEMICAL ANALYSIS OF TUNGSTEN AND MOLYBDENUM ALLOY MATERIALS
KS L 3137-2016(2021) Chemical analysis of zircon refractories
KS L 5208-1986 Chemical analysis of chrome ore for refractories
KS A ISO GUIDE 32:2005 Calibration in analytical chemistry and use of certified reference materials
KS I ISO 24094-2010(2021) Analysis of natural gas－Validation methods for gaseous reference materials
KS L 3128-4-2012 Chemical analysis of refractory products-Part 4:Magnesia and/or dolomite refractories
KS B ISO 376:2002 Metallic materials-Calibration of force-proving instruments used for the verification of uniaxial testing machines
KS B ISO 376:2015 Metallic materials－Calibration of force－proving instruments used for the verification of uniaxial testing machines
KS L 3410-2010 Chemical analysis for highly purity graphite materials
KS L 3410-2015 Chemical analysis for highly purity graphite materials
KS D 2000-2012 Methods for chemical analysis of silver brazing filler metals
KS D 2006-2009 Methods for chemical analysis of nickel brazing filler metals
KS D 1790-1993 Methods of chemical analysis for nickel chromium electric heating material
KS D 2609-1993 Methods for chemical analysis of thoriated tungsten materials
KS D 2609-2013 Methods for chemical analysis of thoriated tungsten materials
KS D 1838-2014 Methods of chemical analysis for iron chromium electric heating material
KS L 3137-2016 Chemical analysis of zircon refractories
KS L 5208-2016(2021) Chemical analysis of chrome ore for refractories
KS D 2587-1990(2006) General rules for chemical analysis of nickel materials for electron tubes
KS D 2006-1984 Methods for chemical analysis of nickel brazing filler metals
KS F 2713-2017(2022) Testing method for analysis of chloride in concrete and concrete raw materials

KR-KS, Material Validation Analysis

KS D ISO 14595-2018 Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials(CRMs)
KS E ISO 11726-2018 Solid mineral fuels — Guidelines for the validation of alternative methods of analysis
KS B ISO 4546-2003(2023)
KS B ISO TR 14936-2003(2023)
KS B 5526-2003(2023)
KS J ISO 21899-2023 Biotechnology — Biobanking — General requirements for the validation and verification of processing methods for biological material in biobanks

American Society for Testing and Materials (ASTM), Material Validation Analysis

ASTM D8392-22 Standard Practice for Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials
ASTM C1297-03 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
ASTM C1297-03(2011) Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
ASTM C1297-18 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
ASTM E870-82(1998)e1 Standard Test Methods for Analysis of Wood Fuels
ASTM E870-82(2019) Standard Test Methods for Analysis of Wood Fuels
ASTM E870-82(2013) Standard Test Methods for Analysis of Wood Fuels
ASTM D1921-01 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D1921-96 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D1921-06 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D1921-18 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM C1297-95e1 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
ASTM E2857-11(2021)e1 Standard Guide for Validating Analytical Methods
ASTM E2857-21 Standard Guide for Validating Analytical Methods
ASTM E2857-22 Standard Guide for Validating Analytical Methods
ASTM E2857-11(2016) Standard Guide for Validating Analytical Methods
ASTM E2857-11 Standard Guide for Validating Analytical Methods
ASTM E2437-05 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials
ASTM E2658-11 Standard Practices for Verification of Speed for Material Testing Machines
ASTM E2658-15 Standard Practices for Verification of Speed for Material Testing Machines
ASTM E2658-15(2023) Standard Practices for Verification of Speed for Material Testing Machines
ASTM C429-01(2011) Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
ASTM D6406-99(2014) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
ASTM D6362-98(2018) Standard Practice for Certificates of Reference Materials for Water Analysis
ASTM D1921-12 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D1921-06e1 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
ASTM D6406-99(2020) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
ASTM C429-21 Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
ASTM C92-95(2005) Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
ASTM D5461-93(1998) Standard Test Method for Rubber Additives-Wet Sieve Analysis of Powdered Rubber Chemicals
ASTM D5461-06(2021) Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials
ASTM E2918-18 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-18a Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-13 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-23 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM D6406-99 Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
ASTM D6406-99(2004) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
ASTM D6406-99(2009) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
ASTM C92-95(2022) Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
ASTM C92-95(2022)e1 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
ASTM E2309/E2309M-20 Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
ASTM E2410-04 Standard Practice for Designing and Validating Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2006)
ASTM D5461-06(2017) Standard Test Method for Rubber Compounding Materials&x2014;Wet Sieve Analysis of Powdered Rubber Compounding Materials
ASTM E2898-20 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM E2898-20a Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM E2882-19 Standard Guide for Analysis of Clandestine Drug Laboratory Evidence
ASTM E870-82(2006) Standard Test Methods for Analysis of Wood Fuels
ASTM D5519-94(2001) Standard Test Method for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D5519-94 Standard Test Method for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D5519-07 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D6407-99(2014) Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
ASTM E2294-03 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry
ASTM E2294-03(2008)e1 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry
ASTM E2294-03(2013) Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry
ASTM E2882-12 Standard Guide for Analysis of Clandestine Drug Laboratory Evidence
ASTM D6407-99 Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
ASTM D6407-99(2004) Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
ASTM D6407-99(2009) Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
ASTM F2931-11 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
ASTM D6621-00(2017) Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM D5519-14 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
ASTM D6382/D6382M-99(2022) Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM C1128-01 Standard Guide for Preparation of Working Reference Materials for Use in the Analysis of Nuclear Fuel Cycle Materials
ASTM C1128-95e1 Standard Guide for Preparation of Working Reference Materials for Use in the Analysis of Nuclear Fuel Cycle Materials
ASTM C1128-23 Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
ASTM C1128-15 Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
ASTM D451-91(2002) Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
ASTM E2161-07 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E2161-07a Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM D3764-19 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems
ASTM D3764-01 Standard Practice for Validation of Process Stream Analyzer Systems
ASTM F2931-13 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
ASTM F2931-14 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
ASTM F2931-17 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
ASTM D6621-00(2012) Standard Practice for Performance Testing of Process Analyzers for Aromatic Hydrocarbon Materials
ASTM G144-01 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High-Temperature Combustion Analyzer

Compressed Gas Association (U.S.), Material Validation Analysis

CGA M-6-2013 Guideline for analytical method volidation

US-FCR, Material Validation Analysis

FCR COE EM 200-1-1-1994 VALIDATION OF ANALYTICAL CHEMISTRY LABORATORIES

International Organization for Standardization (ISO), Material Validation Analysis

ISO 11726:2004 Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
ISO 11726:2017 Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
ISO 7500-2:1996 Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied load
ISO 148-2:1998 Metallic materials - Charpy pendulum impact test - Part 2: Verification of test machines
ISO/CD 14577-2:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines
ISO 23788:2012 Metallic materials - Verification of the alignment of fatigue testing machines
ISO 7500-2:2006 Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force
ISO 4545-2:2005 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines
ISO 4545-2:2017 Metallic materials - Knoop hardness test- Part 2:Verification and calibration of testing machines
ISO/DIS 6506-2:2023 Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines
ISO 12828-2:2016 Validation methods for fire gas analyses - Part 2: Intralaboratory validation of quantification methods
ISO/TR 16268:2009 Surface chemical analysis - Proposed procedure for certifying the retained areic dose in a working reference material produced by ion implantation
ISO 156:1982 Metallic materials; Hardness test; Verification of Brinell hardness testing machines
ISO 146-2:1993 Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2
ISO 6506-2:1999 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
ISO/TR 14936:1998 Metallic materials - Strain analysis report
ISO 10564:1993 Soldering and brazing materials; methods for the sampling of soft solders for analysis
ISO 2943:1998 Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids
ISO 12107:2012 Metallic materials - Fatigue testing - Statistical planning and analysis of data
ISO 12107:2003 Metallic materials - Fatigue testing - Statistical planning and analysis of data
ISO/FDIS 6508-2:2023 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
ISO 6508-2:2022 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
ISO 16859-2:2015 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices
ISO 7500-1:1999 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
ISO/TS 22176:2020 Cosmetics — Analytical methods — Development of a global approach for validation of quantitative analytical methods
ISO 7210:2013 Routine analytical cigarette-smoking machine - Additional test methods for machine verification
ISO/PRF TS 7013 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
ISO 376:1999 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
ISO 7500-1:2015 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system
ISO 16779:2015 Sensory analysis - Assessment (determination and verification) of the shelf life of foodstuffs
ISO 16140-5:2020 Microbiology of the food chain — Method validation — Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods

Professional Standard - Aviation, Material Validation Analysis

HB/Z 112-1986 Statistical Analysis Method for Material Fatigue Test
HB 7491-1997 Requirements for Strength Verification of Military Aircraft Composite Structures

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Material Validation Analysis

ASHRAE 4704-2004 Analysis and Validation of a Psychrometric Apparatus
ASHRAE RP-1133-2001 How to Verify@ Validate@ and Report Indoor Environment Modeling CFD Analyses
ASHRAE SE-99-6-2-1999 Validation of Two French Building Energy Programs@ Part 1: Analytical Verification

Association Francaise de Normalisation, Material Validation Analysis

XP V18-801*XP CEN/TS 17455:2020 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
XP V18-800*XP CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
XP CEN/TS 16800:2021 Lignes directrices pour la validation des méthodes d'analyse physico-chimiques
NF ISO 12828-2:2020 Méthode de validation des analyses de gaz d'incendie - Partie 2 : validation intralaboratoire des méthodes de quantification
FD D25-116-1*FD CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1 : general considerations
NF C26-202:1975 Méthodes d'essai des matières isolantes - Analyse statistique de données d'essais de vieillissement.
XP T90-800*XP CEN/TS 16800:2021 Guideline for the validation of physico-chemical analytical methods
NF A03-011-2*NF EN ISO 148-2:2017 Metallic materials - Charpy pendulum impact test - Part 2 : verification of testing machines
NF A03-155-2*NF EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines
NF X65-040-2*NF ISO 12828-2:2020 Validation method for fire gas analysis - Part 2 : Intralaboratory validation of quantification methods
NF A03-150-2:2006 Metallic materials - Knoop hardness test - Part 2 : verification and calibration of testing machines.
FD V03-119*FD CEN/TR 16059:2011 Food analysis - Performance criteria for single laboratory validated of analysis for the determination of mycotoxins
NF A03-156-2*NF EN ISO 16859-2:2015 Metallic materials - Leeb hardness test - Part 2 : verification and calibration of testing devices
NF B49-416:1969 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of phosphorus.
NF B49-413:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of iron.
NF B49-412:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of aluminium.
NF B49-411:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of silicon (method by insolubilisation in hydrochloric acid medium).
NF B49-414:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of titanium.
NF B49-415:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of manganese.
NF L90-200-70-45*NF EN 16602-70-45:2015 Space product assurance - Mechanical testing of metallic materials
NF A05-201:1989 Metallurgy-General considerations on the use of European certified reference materials(EUROPEAN-CRM) in chemical analysis
FD CEN/TR 16059:2011 Analyse des produits alimentaires - Critères de performance des méthodes validées monolaboratoires d'analyse des mycotoxines
XP CEN/TS 17174:2018 Aliments des animaux : Méthodes d'échantillonnage et d'analyse - Critères de performance pour les méthodes d'analyse validées par un ou plusieurs laboratoires pour le dosage des métaux lourds
XP CEN/TS 17455:2020 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Critères de performance des méthodes d'analyse des mycotoxines validées dans un seul laboratoire ou suite à un essai interlaboratoires
NF B49-417:1968 Chemical analysis of refractories. Silica materials, silico-argillaceous and argillaceous materials. Determination of calcium and magnesium.
NF A03-002:1991 METALLIC MATERIALS. TENSILE TESTING. PART 2 : VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINES. (EUROPEAN STANDARD EN 10002-2).
NF A03-002-2*NF EN ISO 7500-2:2007 Metallic materials - Verification of static uniaxial testing machines - Part 2 : tension creep testing machines - Verification of the applied force
NF A03-154-2:2006 Metallic materials - Vickers hardness test - Part 2 : verification and calibration of testing machines.
NF A03-152-2:2006 Metallic materials - Brinell hardness test - Part 2 : verification and calibration of testing machines.
NF A03-152-2:2014 Metallic materials - Brinell hardness test - Part 2 : verification and calibration of testing machines
NF EN 6041:2018 Série aérospatiale - Matériaux non métalliques - Méthode d'essai - Analyse Enthalpique Différentielle (AED) des matériaux non métalliques (non polymérisés)
NF A03-002-1:2005 Metallic materials - Verification of static uniaxial testing machines - Part 1: tension/compression testing machines - Verification and calibration of the force measuring system
NF V37-022:2013 Routine analytical cigarette-smoking machine - Additional test methods for machine verification
NF C26-306:1994 Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials.
NF ISO 12787:2012 Cosmétiques - Méthodes analytiques - Critères de validation pour les résultats analytiques utilisant des techniques chromatographiques
XP ISO/TS 22176:2020 Cosmétiques - Méthodes analytiques - Développement d'une approche globale pour la validation des méthodes analytiques quantitatives
FD A06-002*FD CEN/TR 10345:2014 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
NF A03-003:2005 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines.
NF B49-418:1970 Chemical analysis of refractory materials (high). Silica materials, siliceous fireclay and fireclay materials. Determination of lithium, potassium and sodium (flame photometric method).
NF E01-014:2017 Cycle de vie des produits mécaniques - Dématérialisation des documents de contrôle - Traçabilité des "certificats matières" pour les matériaux métalliques et non métalliques
NF A03-153-2*NF EN ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2 : verification and calibration of testing machines and indenters

IT-UNI, Material Validation Analysis

UNI 7277-1974
UNI CEN/TS 16800-2021 Guideline for the validation of physico-chemical analytical methods
UNI 5612-1965
UNI 7337-1974 Chemical analysis of ferrous materials. Determination of aluminium in steel. Gravimetric method.
UNI 7408-1975

ES-UNE, Material Validation Analysis

UNE-CEN/TS 17455:2021 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
UNE-CEN/TS 16800:2020 Guideline for the validation of physico-chemical analytical methods (Endorsed by Asociación Española de Normalización in February of 2021.)
UNE-EN ISO 14577-2:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015)
UNE-EN ISO 6507-2:2018 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018)
UNE-EN ISO 4545-2:2018 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2017)
UNE-EN ISO 6506-2:2019 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2017)
UNE-EN ISO 7500-1:2018 Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018)
UNE-CEN ISO/TR 24094:2012 IN Analysis of natural gas - Validation methods for gaseous reference materials (ISO/TR 24094:2006)
UNE-EN ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015)

Standard Association of Australia （SAA）, Material Validation Analysis

AS 2503.5:2003 Refractories and refractory materials - Chemical analysis - Chrome-bearing materials
AS 5388.2:2012
AS 2503.3:2006 Refractories and refractory materials - Chemical analysis - High alumina materials
AS 2503.5:2003(R2013)
AS 2503.1:1996 Refractories and refractory materials - Chemical analysis Part 1: Silica refractories
AS 1774.19:2003(R2013)
AS 2503.2:2006 Refractories and refractory materials - Chemical analysis - Aluminosilicate refractories
AS 1817.2:2002 Metallic materials - Vickers hardness test - Verification of testing machines
AS 2503.2:1996 Refractories and refractory materials - Chemical analysis Part 2: Aluminosilicate refractories

American National Standards Institute （ANSI), Material Validation Analysis

ANSI N15.51-1990 Measurement Control Program - Nuclear Materials Analytical Chemistry Laboratory
ANSI N15.51-2007 Methods of Nuclear Material Control - Measurement Control Program – Nuclear Materials Analytical Chemistry Laboratory (Institute for Nuclear Materials Management (INMM))
ANSI/ASTM D6260:1998 Test Method for Gravimetric Determination of Carbon Black in Nylon Materials

Taiwan Provincial Standard of the People's Republic of China, Material Validation Analysis

CNS 11414-1985 Method of Chemical Analysis for Tungsten and Molybdenum Material
CNS 13944-1997 Method of preparing deposited metal sample for chemical analysis
CNS 624-1956 Method of Chemical Analysis for Refractory Material
CNS 12787-1990 Method of Chemical Analysis of Chrome Ore for Refractories
CNS 12903-1991 General Rules for Chemical Analysis of Nickel Materials for Electron Tubes
CNS 623-1956 Method of Test for Sieve Analysis and Water Content of Refractory Material

GM North America, Material Validation Analysis

GM GM9745P-2003 Analyis of Wood Fiber Material

Danish Standards Foundation, Material Validation Analysis

DS/CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
DS/EN ISO 148-2:2009 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
DS/EN ISO 7500-2:2007 Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force
DS/CEN/TS 16800:2021 Guideline for the validation of physico-chemical analytical methods
DS/EN ISO 7500-1/AC:2009 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
DS/EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
DS/ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
DS/CEN/TR 16059:2011 Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins
DS/CEN ISO/TR 24094:2008 Analysis of natural gas - Validation methods for gaseous reference materials
DS/CEN/TR 10345:2008 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
DS/EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines

Group Standards of the People's Republic of China, Material Validation Analysis

T/CAQI 107-2020 General Rule for Verificaiton and Evaluation of Analytical Instrument
T/CNTAC 70-2020 Quantitative detection for graphene materials in fibers - Elemental analysis method

Defense Logistics Agency, Material Validation Analysis

DLA MIL-STD-1525 B VALID NOTICE 2-2012 Verification Testing of Parachute Textile Materials

ANSI - American National Standards Institute, Material Validation Analysis

N15.51-1990 Nuclear Materials Management - Measurement Control Program - Nuclear Materials Analytical Chemistry Laboratory (INMM)
N15.51-2007 Methods of Nuclear Material Control - Measurement Control Program – Nuclear Materials Analytical Chemistry Laboratory (INMM)

NL-NEN, Material Validation Analysis

NEN 3102-1989 Chemical analysis Laboratory apparatus, reagents and auxüiary materials

Society of Automotive Engineers (SAE), Material Validation Analysis

SAE J2869-2010 Mechanical Systems Physics-of-Failure Analysis Experimental Validation
SAE J3079/1-2021 Validation of Compressibility Test Systems for Friction Materials
SAE J3079-1-2021 Validation of Compressibility Test Systems for Friction Materials

SAE - SAE International, Material Validation Analysis

SAE J2869-2016 Mechanical Systems Physics-of-Failure Analysis Experimental Validation

Professional Standard - Public Safety Standards, Material Validation Analysis

GA 132-1996 Material smoke toxicity analysis

未注明发布机构, Material Validation Analysis

BS EN ISO 7500-2:2006(2007) Metallic materials — Verification of static uniaxial testing machines — Part 2 : Tension creep testing machines — Verification of the applied force
BS EN ISO 4545-2:2018 Metallicmaterials — Knoop hardness test Part 2 : Verification and calibration of testing machines
BS 1610-1:1992(1999) Materials testing machines and force verification equipment — Part 1 : Specification for the grading of the forces applied by materials testing machines whenused inthe compression mode
DIN EN ISO 6507-2 Bei 1:1998 Metallic materials — Vickers hardness test — Part 2: Verification of the hardness testing machines — Recommendations according to the verification and for the performance of the testing machine and the plunger
BS PD CEN ISO/TR 24094:2007 Analysis of natural gas — Validation methods for gaseous reference materials

CZ-CSN, Material Validation Analysis

CSN 99 4179-1990 Grain testers. Methods of verification and calibrating
CSN 01 2840-1963 Czechoslovak analytical standard sample for ore raw materials

Lithuanian Standards Office , Material Validation Analysis

LST CEN/TS 16800-2021 Guideline for the validation of physico-chemical analytical methods
LST EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
LST EN ISO 7500-2:2007 Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006)
LST EN ISO 148-2:2009 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2008)
LST EN ISO 14577-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2002)
LST EN ISO 6506-2:2015 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014)
LST EN ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004)

司法部, Material Validation Analysis

SF/T 0063-2020 General principles for validation of forensic toxicological analysis methods

VN-TCVN, Material Validation Analysis

TCVN 312-2-2007 Metallic materials.Charpy pendulum impact test.Part 2:Verification of test machines
TCVN 6819-2001 Chrome contained refractory materials.Methods of chemical analysis

RO-ASRO, Material Validation Analysis

STAS 1883-1974 TANNING MATERIALS Sampling and methods ol analysis
STAS 5841-1967
STAS 166/1-1972 SILICA-ALUMINA REFRACTOP.IES Mcthods of analysis General indications for carrying out the analysis
STAS 5781/1-1980 Dolomitical refractory products ANALYSIS METHODS General specifications for Chemical analysis carrying out
STAS SR EN 10002-2-1995 Metallic materials. Tensile testing. Part 2 : Verification of the force measuring system of the tensile testing machines

CU-NC, Material Validation Analysis

NC 54-391-1987 Construction Materials Concrete. Methods and Means of Verification

Shanxi Provincial Standard of the People's Republic of China, Material Validation Analysis

DB14/T 2798-2023 Specification for verification of chemical analysis methods in testing laboratories
DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy
DB1404/T 17-2021 Inspection and testing laboratory instrument analytical method validation requirements chromatography

ZA-SANS, Material Validation Analysis

SANS 6506-2:2009 Metallic materials - Brinell hardness test Part 2: Verification and calibration of testing machines
SANS 14577-2:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines

AENOR, Material Validation Analysis

UNE-EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011)
UNE-EN ISO 7500-2:2007 Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006)
UNE-EN ISO 148-2:2017 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016)
UNE-ISO 16779:2017 Sensory analysis. Assessment (determination and verification) of the shelf life of foodstuffs.

AR-IRAM, Material Validation Analysis

Japanese Industrial Standards Committee (JISC), Material Validation Analysis

JIS R 3504:1976 Glass material for chemical analysis
JIS R 7223:1997 Chemical analysis of graphite materials
JIS H 1403:1987 Methods for chemical analysis of tungsten materials
JIS H 1404:1987 Methods for chemical analysis of molybdenum materials
JIS H 1403:2001 Methods for chemical analysis of tungsten materials
JIS H 1404:2001 Methods for chemical analysis of molybdenum materials
JIS H 1405:1987 Methods for chemical analysis of thoriated tungsten materials

CEN - European Committee for Standardization, Material Validation Analysis

EN ISO 14577-2:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines

ESD - ESD ASSOCIATION, Material Validation Analysis

TR53-01-2006 Compliance Verification of ESD Protective Equipment and Materials

The American Road & Transportation Builders Association, Material Validation Analysis

AASHTO T 311-2000(R2010) Standard Method of Test for Grain-Size Analysis of Granular Soil Materials
AASHTO T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials

PL-PKN, Material Validation Analysis

PN C04638-03-1988 Water and waste water ?on balance of water Analytical verification of ion balance in water
PN P50092-1992 Raw materials for the paper industry. Pulpwood. Chemical analysis

American Society of Mechanical Engineers (ASME), Material Validation Analysis

ASME STP-PT-022-2008 COMPARISON AND VALIDATION OF CREEP-BUCKLING ANALYSIS METHODS

TH-TISI, Material Validation Analysis

TIS 2180-2004 Statistical planning and analysis of data for fatigue testing of metallic materials.[iso title: metallic materials.fatigue testing.statistical planning and analysis of data]

SE-SIS, Material Validation Analysis

SIS SS-EN 10 002-2-1992 Meta I lic materials — Tensile testing — Part 2: Verification of the force measuring system of the tensile testing machines

US-Unspecified Preparing Activity, Material Validation Analysis

DI-SAFT-81933-2013 Critical Safety Item Inspection and Material Certification Report

Professional Standard - Railway, Material Validation Analysis

TB/T 2946-1999 Analysis of pyrolysis gas toxicity of materials

ES-AENOR, Material Validation Analysis

UNE 30 003

Professional Standard - Certification and Accreditation, Material Validation Analysis

RB/T 190-2015 Validation procedures for chemical analysis methods of gold in chemical mines
RB/T 160-2017 Guidance on verification and overall evaluation of analytical chemistry instrument

YU-JUS, Material Validation Analysis

JUS B.D8.210-1982 Refractories. Chemical analysis fired clay production, raw and high aluminium raw materials
JUS B.D8.200-1982 Refractories. Chemical analysis. General instruction
JUS B.D8.240-1982 Refractories. Chemical analysis silicon carbide production and raw materials
JUS B.D8.225-1984 Refractories. Methods for testing. Chemical analysis tor magnesit and magnesit production

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Material Validation Analysis

IPC TM-650 5.1.440-1975 Analysis of Pre-Preg Materials for Gel Time

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Material Validation Analysis

GB/T 5070-2015(英文版) Chemical analysis of refractories containing chrome
GB/T 24176-2009 Metallic materials.Fatigue testing.Statistical planning and analysis of data
GB/T 5070-2015 Chemical analysis of refractories containing chrome
GB/T 6901-2008 Chemical analysis of silica refractories
GB/T 4984-2007 Chemical analysis of refractories containing zirconia
GB/T 5070-2007 Chemical analysis of refractories containing chrome
GB/T 5069-2015(英文版) Chemical analysis of magnesia-alumina refractories
GB/T 21223.2-2015 Guide for the statistical analysis of ageing test data.Part 2:Validation of procedures for statistical analysis of censored normally distributed data

CN-STDBOOK, Material Validation Analysis

图书 A-4619 Material quality inspection and analysis technology

Professional Standard-Ships, Material Validation Analysis

CB/Z 351-1995 Statistical analysis method for low cycle fatigue test data of ship materials

SG-SPRING SG, Material Validation Analysis

SS ISO 10564:1993 Soldering And Brazing Materials -Methods For The Sampling Of Soft Solders For Analysis
SS 285 AMD 1-1984 Soldering And Brazing Materials -Methods For The Sampling Of Soft Solders For Analysis

GM Europe, Material Validation Analysis

GME GMI 08010 V-1998 General Requirements for Plastic Fuel Tanks, Verification Part (English/German; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW3086.)

BE-NBN, Material Validation Analysis

NBN-EN 10045-2-1993 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)
NBN-EN 10002-3-1995 Materiaux metalliques - Essai de traction - Partie 3 : Etalonnage des instruments de mesure de force utilises pour la verification des machines d'essais uniaxiaux

AGMA - American Gear Manufacturers Association, Material Validation Analysis

P229.27-1983 Results of an Experimental Program Utilized to Verify a New Gear Tooth Strength Analysis

GB-REG, Material Validation Analysis

REG NASA-LLIS-5117-2012 Lessons learned - Specifying Confidence Levels For Requirements Verified By Analysis
REG NASA-LLIS-0534-1997 Lessons Learned ?Materials Compatibility: Verifying Design Acceptability Prior to Manufacture and Distribution of Hardware

API - American Petroleum Institute, Material Validation Analysis

API REPORT 90-56-1993 Analysis Cylindrical Shell Database and Validation of Design Formulations

RU-GOST R, Material Validation Analysis

GOST 28875-1990 Spices. Acceptance and methods of analysis
GOST R 57988-2017 Polymer composites. Thermogravimetric analysis coupled with analysis by infrared spectroscopy (TGA/IR)
GOST R ISO 2943-2011 Hydraulic fluid power. Filter elements. Verification of material compatibility with fluids
GOST R 55410-2013 Refractory. Analysis by X-ray fluorescence (XRF)
GOST R 8.681-2009 State system for ensuring the uniformity of measurements. State verification schedule for measuring of moisture content of firm and loose materials
GOST R 8.748-2011 State system for ensuring the uniformity of measurements. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 1. Test method
GOST ISO 12787-2016 Perfumery and cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
GOST ISO 16779-2017 Sensory analysis. Assessment (determination and verification) of the shelf life of foodstuffs
GOST 23.207-1979 Ensuring of wear resistance of products. Testing of engineering materials for impact abrasive wear

Professional Standard - Aerospace, Material Validation Analysis

QJ 2136.1-1991 Physical and chemical re-examination samples of metal materials stipulated chemical composition analysis samples

工业和信息化部, Material Validation Analysis

YS/T 1258-2018 Thermal Analysis Methods for Testing Melting and Crystallization Temperatures of Nonferrous Metal Materials

AT-ON, Material Validation Analysis

ONORM ISO 2943:1982 Hydraulic fluid power; fllter elements veriflcation of material compatibility with fluids

IN-BIS, Material Validation Analysis

IS 12872-1990

Professional Standard - Building Materials, Material Validation Analysis

JC/T 2342-2015 Method for the quantitative phase analysis of silicon nitride

Professional Standard - Electron, Material Validation Analysis

SJ/T 11075-1996 Methods for chemical analysis of raw materials used in ferrites

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Material Validation Analysis

GB/T 6901-2017 Chemical analysis of silica refractories
GB/T 35655-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Chromatography
GB/T 27417-2017 Conformity assessment—Guidance on validation and verification of chemical analytical methods

机械工业部, Material Validation Analysis

JB/T 8443-1996 Chemical analysis method of copper-chromium contact materials

Professional Standard - Hygiene , Material Validation Analysis

WS/T 420-2013 Verification of analytical performance of quantitative kits by clinical laboratory

PH-BPS, Material Validation Analysis

PNS ISO 16779:2021 Sensory analysis - Assessment (determination and verification) of the shelf life of foodstuffs

International Electrotechnical Commission (IEC), Material Validation Analysis

IEC TR 60493-2:2010 Guide for the statistical analysis of ageing test data - Part 2: Validation of procedures for statistical analysis of censored normally distributed data

Professional Standard - Forestry, Material Validation Analysis

LY/T 1083-2008 Test method for analysis of raw materials of vegetable tannin extracts