ZH
RU
ES

DIA in thread

DIA in thread, Total:498 items.

In the international standard classification, DIA in thread involves: Machine tool systems, Ground service and maintenance equipment, Fasteners, Screw threads, Vocabularies, Protective equipment, Cutting tools, Hand-held tools, Valves, Cycles, Linear and angular measurements, Electrical accessories, Pipeline components and pipelines, Fasteners for aerospace construction, Surface treatment and coating, Aerospace fluid systems and components, Shipbuilding and marine structures in general, Components for aerospace construction, Information sciences. Publishing.


Aerospace Industries Association/ANSI Aerospace Standards, DIA in thread

  • AIA/NAS NASM124811-124850-2011 INSERT, CRES, HELICAL COIL FINE THREAD, 3 DIA NOMINAL LENGTH
  • AIA/NAS NASM122236-122275-2011 INSERT, CRES HELICAL COIL COARSE THREAD, 3 DIA NOMINAL LENGTH
  • AIA/NAS NASM122156-122195-2010 INSERT, CRES, HELICAL COIL, COARSE THREAD, 2 DIA NOMINAL LENGTH Rev 1 [Superseded: DLA MS122156 THRU MS122195 REV D CANC NOTICE 1, DLA MS122156 THRU MS122195 REV D, DLA MS122156 THRU MS122195 REV C]
  • AIA/NAS NASM124651-124690-2010 INSERT, CRES, HELICAL COIL, FINE THREAD, 1 DIA NOMINAL LENGTH Rev 1 [Superseded: DLA MS124651 THRU MS124690 REV D CANC NOTICE 1, DLA MS124651 THRU MS124690 REV D]
  • AIA/NAS NASM122116-122155-2010 INSERT, CRES, HELICAL COIL, COARSE THREAD, 1-1/2 DIA NOMINAL LENGTH REV 1 [Superseded: DLA MS122116 THRU MS122155 REV D CANC NOTICE 1, DLA MS122116 THRU MS122155 REV D, DLA MS122116 THRU MS122155 REV C]
  • AIA/NAS NASM124651-124690-2014 INSERT, CRES, HELICAL COIL, FINE THREAD, 1 DIA NOMINAL LENGTH (Rev 2)
  • AIA/NAS NASM122076-122115-2014 INSERT, CRES, HELICAL COIL, COARSE THREAD, 1 DIA NOMINAL LENGTH (REV 2)
  • AIA/NAS NASM33537-2009 INSERT, SCREW THREAD, HELICAL COIL, INCH SERIES, COARSE AND FINE THREAD, STANDARD ASSEMBLY DIMENSIONS FOR Rev 1

Society of Automotive Engineers (SAE), DIA in thread

  • SAE AS7123-3-1979 AS7123-7170 Bolt .3125 Nom. DIA Unified Thread Large Round Head (S.106)
  • SAE AS3083-2012 INSERT - CRES HELICAL COIL FINE THREAD, STRAIGHT STUD LOCKING, 3 DIA NOM LENGTH
  • SAE AS3081-2012 INSERT - CRES HELICAL COIL FINE THREAD, STRAIGHT STUD LOCKING, 2 DIA NOM LENGTH
  • SAE AS6850-3-1979 AS6850-6894 Bolt No.10-32 Nom: Thread Size (.190 DIA.) Large Round Head (S.106)
  • SAE AS3097-2012 INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 3 DIA NOM LENGTH
  • SAE AS3095-2012 INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 2 DIA NOM LENGTH
  • SAE RS-428-5-1955 RS428 Tapped Holes for Wire Thread Inserts, (B.A. B.S.F. B.S.W. Threads) – Unplated
  • SAE RS-429-4-1955 RS429 Tapped Holes for Wire Thread Inserts, (BSPF. Threads)-Unplated
  • SAE AMS3787A-2001 Thread, Para-Aramid Intermediate Modulus
  • SAE AMS3787-1986 THREAD, PARA-ARAMID Intermediate Modulus
  • SAE RS-430-5-1969 RS430 Tapped Holes for Wire Thread Inserts, (Unified Threads)-Unplated
  • SAE AS758A-1976 FITTINGS - INSTALLATION IN STRAIGHT THREADED BOSS
  • SAE AS758B-2013 FITTINGS - INSTALLATION IN STRAIGHT THREADED BOSS
  • SAE AS758-1963 FITTINGS, INSTALLATION IN STRAIGHT THREADED BOSS
  • SAE AS894-1976 TEE, FLARELESS TUBE TO MALE PIPE ON RUN
  • SAE AS7470C-2008 Bolts and Screws, Steel, Corrosion and Moderate Heat Resistant Heat Treated, Roll Threaded
  • SAE AS21911C-2015 TEE, BULKHEAD, FLARELESS TUBE, INTERNAL THREAD ON RUN
  • SAE AS21911B-2007 TEE, BULKHEAD, FLARELESS TUBE, INTERNAL THREAD ON RUN
  • SAE AS21911E-2023 TEE, BULKHEAD, FLARELESS TUBE, INTERNAL THREAD ON RUN
  • SAE AS7470C-2012 Bolts and Screws, Steel, Corrosion and Moderate Heat Resistant Heat Treated, Roll Threaded
  • SAE AS7470-2001 Bolts and Screws, Steel, Corrosion and Moderate Heat Resistant Heat Treated, Roll Threaded
  • SAE AS4309C-2009 Fitting, Nipple, Flared Tube to Pipe Thread, for Seal Ring
  • SAE RS-727-2-1976 RS727 Tapped Hole and Fitted Size Data for Helical Coil Wire Thread Inserts (Metric)
  • SAE AMS7470F-1970 BOLTS AND SCREWS, STEEL, CORROSION AND MODERATE HEAT RESISTANT Heat Treated, Roll Threaded
  • SAE AMS7470H-1991 Bolts and Screws Steel, Corrosion and Moderate Heat Resistant, Heat Treated, Roll Threaded (Ams 5616)
  • SAE AS7473B-2011 Bolts and Screws, Roll Threaded Procurement Specification for
  • SAE AS6159A-2015 FITTING ASSEMBLY@ TEE@ AXIALLY SWAGED TO FEMALE FLARELESS ON THE RUN@ MALE FLARELESS ON THE SIDE@ HYDRAULIC@ UP TO 1500 PSI
  • SAE RS-444-3-1977 RS444 Dimensions of Threads not included in B.S.2779 (5/16" and 7/16" Pipe Diameters)
  • SAE AS9902D-2010 PLUG, MACHINE THREAD DRILLED, PREFORMED PACKING, AS8879 THREAD (UNS S34700)
  • SAE MA1421-1996 Aerospace Selected Diameter-Pitch Combinations of Metric 60 Degrees Screw Threads for Shaft or Bearing Retaining Screw Threads

SAE - SAE International, DIA in thread

  • SAE AS3083A-2019 INSERT - CRES HELICAL COIL FINE THREAD, STRAIGHT STUD LOCKING, 3 DIA NOM LENGTH
  • SAE AS3081A-2019 INSERT - CRES HELICAL COIL FINE THREAD, STRAIGHT STUD LOCKING, 2 DIA NOM LENGTH
  • SAE AS3095A-2018 INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 2 DIA NOM LENGTH
  • SAE AS3097A-2018 INSERT - CRES HELICAL COIL FINE THREAD, LOCKING (LOW FRICTION SYSTEMS) 3 DIA NOM LENGTH
  • SAE AS758B-1989 Fittings - Installation in Straight Threaded Boss
  • SAE AS7470B-2005 Bolts and Screws@ Steel@ Corrosion and Moderate Heat Resistant Heat Treated@ Roll Threaded
  • SAE AS7470-1991 Bolts and Screws@ Steel@ Corrosion and Moderate Heat Resistant Heat Treated@ Roll Threaded
  • SAE AS7470D-2019 Bolts and Screws@ Steel@ Corrosion and Moderate Heat Resistant Heat Treated@ Roll Threaded
  • SAE J121M-2013 Decarburization in Hardened and Tempered Metric Threaded Fasteners
  • SAE AS7470A-2003 Bolts and Screws@ Steel@ Corrosion and Moderate Heat Resistant Heat Treated@ Roll Threaded (FSC 5306)
  • SAE AS4309A-2006 Fitting, Nipple, Flared Tube to Pipe Thread, for Seal Ring
  • SAE AS4309D-2015 FITTING@ NIPPLE@ FLARED TUBE TO PIPE THREAD@ FOR SEAL RING
  • SAE AS6159-2011 FITTING ASSEMBLY@ TEE@ AXIALLY SWAGED TO FEMALE FLARELESS ON THE RUN@ MALE FLARELESS ON THE SIDE@ HYDRAULIC@ UP TO 1500 PSI

AIA/NAS - Aerospace Industries Association of America Inc., DIA in thread

Aerospace Industries Association, DIA in thread

  • AIA NAS 6318-1999 Bolt, Tension, Hex Head, Close Tolerance, A286 CRES, Short Thread, Reduced Major Thread DIA, Self-Locking and Nonlocking, 160 KSI Ftu Revision 7; FSC5305
  • AIA NASM33749-1998 Screw - Installation and Limitations for Usage of Thread Cutting and Thread Forming FSC 5305

Professional Standard - Aviation, DIA in thread

  • HB 1922-1975 Tapered thread medium diameter thread plug gauge
  • HB 1926-1975 Taper thread middle diameter thread ring gauge
  • HB 1930-1975 Calibration plug gauge for taper thread pitch diameter thread ring gauge
  • HB 4007-1987 Taper thread pith diameter screw thread ring gauge exclusively used for gas cylinders
  • HB 4006-1987 Taper thread pith diameter screw thread plug gauge exclusively used for gas cylinders
  • HB 4009-1987 Reference plug gauge of taper thread pitch diameter screw thread ring gauge exclusively used for gas cylinders
  • HB 0-1-1974 The position of the threaded part of the bolt in the nut and interlayer
  • HB 0-1-1983 The position of the threaded part of the bolt in the nut and interlayer
  • HB 4265-2004 Internal screw gauge for wire thread insert
  • HB 8363-2013 1Cr17Ni2 thread tolerance band 6e head 1 fuse hole thread small hexagon head bolt
  • HB 4265-1989 Thread plug gauges for internal threads for mounting wire thread inserts
  • HB 6818-1993 MJ external thread cone, V-type middle diameter measuring tool
  • HB 6819-1993 MJ external thread arc type middle diameter measuring tool
  • HB 6825-1993 Technical conditions of measuring tool for pitch diameter of MJ external thread
  • HB 7337-1996 Interference external thread diameter measuring tool d=3~45
  • HB 6817-1993 MJ external thread complete pitch diameter measuring tool
  • HB 1931-1975 Calibration plug gauge for tapered thread root high thread ring gauge
  • HB 4273-1989 Specifications for thread gauges and standard screw hole rings for internal threads for wire thread inserts
  • HB 4273-2004 Technical specification for internal screw gauge for wire thread insert and standard tapping ring
  • HB 5-15-1983 threaded connector
  • HB 5-15-1976 threaded connector

CZ-CSN, DIA in thread

IN-BIS, DIA in thread

Association Francaise de Normalisation, DIA in thread

  • NF ISO 6696:1992 Cycles - Filetages utilisés dans les ensembles boîtes de pédalier
  • NF E03-005:1981 Pipe threads where pressure tight joints are not made on the threads (parallel internal and external threads).
  • NF E66-120:1975 Hand taps for pipe threads for parallel and taper threads.
  • NF ISO 965-2:1999 Filetages métriques ISO pour usages généraux - Tolérances - Partie 2 : dimensions limites pour filetages intérieurs et extérieurs d'usages généraux. Qualité moyenne.
  • NF P28-115*NF EN 17490:2021 Determination of screw pull out forces from screw thread channels
  • NF EN 148-2:1999 Appareils de protection respiratoire - Filetages pour pièces faciales - Partie 2 : Raccord à filetage central
  • NF E03-004:1981 Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).
  • NF E03-053/A1*NF ISO 965-2/A1:2021 ISO general purpose metric screw threads - Tolerances - Part 2 : limits of sizes for general purpose external and internal screw threads - Medium quality - Amendment 1
  • NF E03-619:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for external threads.
  • NF S76-023-2*NF EN 148-2:1999 Respiratory protective devices. Threads for facepieces. Part 2 : centre thread connection.
  • NF L05-110:1953 Screw threads. Selection for aircraft industry (rech.).
  • NF E03-620:1997 Checking of ISO metric trapezoidal threads with gauges. Screw gauges for internal threads.
  • NF E66-101*NF ISO 5969:2002 Ground thread taps for pipe threads G series and Rp series - Tolerances on the threaded portion.
  • NF L40-101:1974 Connectors, axial sealing. Internal thread bosses, ISO metric thread profile and B.N.A.E. Tolerances.
  • FD E03-003:2022 Filetages - Références des principaux filetages étrangers normalisés
  • NF E03-004-1*NF EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1 : taper external threads and parallel internal threads - Dimensions, tolerances and designation.
  • NF E03-153:1975 Checking of threads with limit gauges-threaded gauges for nuts.
  • NF E03-056:1970 ISO SYSTEM OF TOLERANCES FOR SCREW THREADS. COARSE QUALITY 7H/8 G FOR SCREWS AND BOLTS.
  • NF E03-165:1984 Checking of pipe threads where pressure tight joints are made on the threards with limit gauges (according to NF E 03-004).
  • NF EN 10226-2:2005 Filetages de tuyauteries pour raccordement avec étanchéité par le filetage - Partie 2 : filetages extérieurs coniques et filetages intérieurs coniques - Dimensions, tolérances et désignation
  • NF L40-105:1973 Connectors, axial sealing. Internal thread bosses, ISO metric thread profile and tolerances.
  • NF E03-164:1986 Pipe threads. Checking of parallel pipe threads with limit gauges. Plain gauges for external and internal screw threads.
  • NF E27-431:1979 Threaded core plugs and threaded slotted pipe plugs.
  • NF E03-162:1982 Checking of parallel pipe threads with limit gauges. Threaded gauges for screws.
  • NF E03-163:1982 Checking of parallel pipe threads with limit gauges. Threaded gauges for nuts.
  • NF E03-004-2*NF EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2 : taper external threads and taper internal threads - Dimensions, tolerances and designation

IT-UNI, DIA in thread

British Standards Institution (BSI), DIA in thread

  • BS EN 17490:2021 Determination of screw pull out forces from screw thread channels
  • BS ISO 965-2:1998+A1:2021 ISO general purpose metric screw threads. Tolerances - Limits of sizes for general purpose external and internal screw threads. Medium quality
  • BS EN 148-2:1999 Respiratory protective devices: threads for facepieces - Centre thread connection
  • BS ISO 965-2:1998 ISO general purpose metric screw threads - Tolerances - Limits of sizes for general purpose external and internal screw threads - Medium quality
  • BS ISO 965-2:1999 ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality
  • BS 919-2:2007 Screw gauge limits and tolerances – Part 2: Specification for gauges for screw threads of Whitworth and B.A. forms
  • 20/30423713 DC BS ISO 965-2 AMD1. ISO general purpose metric screw threads. Tolerances. Part 2. Limits of sizes for general purpose external and internal screw threads. Medium quality
  • BS 84:2007 Parallel screw threads of Whitworth form – Requirements
  • BS 7842:1996 Bolts, screws and studs with pre-applied thread sealing feature incorporated into the thread
  • BS 6102-9:1990 Cycles. Specification for screw threads used in bottom bracket assemblies
  • BS EN 10226-2:2005(2016) Pipe threads where pressure tight joints are made on the threads - Taper external threads and taper internal threads - Dimensions, tolerances and designation
  • BS EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parallel internal threads. Dimensions, tolerances and designation
  • BS EN 10226-1:2004(2010) Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parallel internal threads. Dimensions, tolerances and designation
  • BS EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
  • BS EN 10226-2:2006 Pipe threads where pressure tight joints are made on the threads - Taper external threads and taper internal threads - Dimensions, tolerances and designation
  • BS EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Verification by means of limit gauges
  • BS 6528:1984 Glossary of terms for cylindrical screw threads

AT-ON, DIA in thread

AENOR, DIA in thread

  • UNE 17708:2002 ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality.
  • UNE-EN 148-2:1999 Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection
  • UNE 17709:2002 ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads.
  • UNE-EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads. Part 1: Taper external threads and parellel internal threads. Dimensions, tolerances and designation.
  • UNE-EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation

CH-SNV, DIA in thread

German Institute for Standardization, DIA in thread

  • DIN ISO 6696:2016-07 Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
  • DIN EN 17490:2021-12 Determination of screw pull out forces from screw thread channels; German version EN 17490:2021
  • DIN 7998:1975-02 Threads and Thread Ends for Wood Screws
  • DIN 2244:2002 Screw threads - Terms and screw thread elements for parallel screw threads
  • DIN 2244:2002-05 Screw threads - Terms and screw thread elements for parallel screw threads
  • DIN 76-3:1977 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
  • DIN 5606-2:1975-03 Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
  • DIN ISO 965-2:1999 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998)
  • DIN 16261:2004 PN 16 cocks with female/female and female/male connection for pressure gauges
  • DIN 2981:1982 Theraded steel pipe fittings; Fittings with long screw thread
  • DIN EN 148-2:1999-04 Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection; German version EN 148-2:1999
  • DIN 76-1:2016 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
  • DIN 76-1:2004 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1
  • DIN 76-3:1977-01 Runouts, Undercuts for Trapezoidal Threads, Buttress Threads and Knuckle Threads and other Threads of Coarse Pitch
  • DIN 86103:2019-09 Sockets for screwed ends with metric fine thread and Whitworth pipe thread
  • DIN 76-2:1984-12 Thread run-outs and thread undercuts for pipe threads conforming to ISO 228 part 1
  • DIN 3858:1988 Whitworth pipe threads for pipe couplings; parallel internal threads and taper external threads; thread dimensions
  • DIN EN 148-2:1999 Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection; German version EN 148-2:1999
  • DIN 802-6:2003-07 Manufacturing to tolerances on the threaded portion of screwing taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts as in DIN 8140 for ISO metric coarse and fine pitch threads
  • DIN 2440:1978 Steel Tubes; Medium-Weight Suitable for Screwing
  • DIN 802-5:1997 Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion
  • DIN 5606-2:1975 Gauging of threads on workpieces for railway vehicles; round thread, acme thread, rounded acme thread
  • DIN 30387:1976 Shouldered nuts; metric fine thread, rounded acme thread
  • DIN 65532:1984 Aerospace; runouts, undercuts and thread ends for MJ-threads to DIN ISO 5855
  • DIN 8141-2:1993 ISO metric coarse and fine pitch screw threads for interference fits in aluminium cast alloys with diameters from 5 mm to 16 mm - Gauges for internal and external threads
  • DIN ISO 965-2/A1:2021-01 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality - Amendment 1 (ISO 965-2:1998/DAM 1:2020); Text in German and English / Note: Date of issue 2020-12...
  • DIN 80705:1990 Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
  • DIN 80705:2018 Thin nuts with small widths across flats - Coarse pitch thread, fine pitch thread
  • DIN 2279:2001-12 Geometrical Product Specifications (GPS) - Gauges for ISO metric screw threads - Gauging of the internal and external threads; Survey, inscription, marking, application
  • DIN 3858:2005-08 Whitworth pipe threads for pipe unions - Parallel internal thread and taper external thread - Dimensions
  • DIN 2278:1967 Dirt Grooves on Screw Thread Gauges for Screw Threads with ISO Metric Profile
  • DIN 14-3:1987 ISO-metric screw thread; screw threads below 1 mm diameter; tolerances
  • DIN 802-3:1985 Tolerances on the threaded portion of taps; taps for pipe threads
  • DIN ISO 6696:2016 Cycles - Screw threads used in bottom bracket assemblies (ISO 6696:1989)
  • DIN 332-2:1983-05 Center holes 60° with thread for shaft ends for rotating electrical machines
  • DIN 7500-2:1984 Thread rolling screws for ISO metric thread; guideline values for hole diameters
  • DIN 802-5:1997-02 Tolerances on the threaded portion of tape - Part 5: Ground threaded taps for ISO metric thread; threads for interference fits according to DIN 8141-1, coarse and fine pitches; manufacturing tolerances on the threaded portion
  • DIN 13-8:1999 ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm
  • DIN 1893-1:1978 Disc type thread milling cutters for ISO metric trapezoidal threads; dimensions
  • DIN 103-9:1985-02 ISO metric trapezoidal screw threads; gauging of external and internal threads; gauge dimensions and design features
  • DIN 30660:2022 Sealing materials for metallic threaded joints in potable water installations
  • DIN 30660:2022-04 Sealing materials for metallic threaded joints in potable water installations / Note: This standard is part of the DVGW body of rules.
  • DIN 802-6:2003 Manufacturing to tolerances on the threaded portion of screwing taps - Part 6: Ground taps for tapped holes (EG) for wire thread inserts as in DIN 8140 for ISO metric coarse and fine pitch threads
  • DIN 40435:2003 Machine taps for the tapped holes (EG) for wire thread inserts for ISO metric screw threads according to DIN 8140 - Coarse pitch threads EG M2 to EG M52 and fine pitch threads EG M8 × 1 to EG M48 × 3 - Dimensions
  • DIN 263-3:2003 Single- and double-start acme thread with clearance for rail vehicles - Part 3: Thread gauges; Thread dimensions and permissible wear of thread gauge
  • DIN 13-5:1999 ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm
  • DIN 13-7:1999 ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm
  • DIN 13-3:1999 ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm
  • DIN 13-6:1999 ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm
  • DIN 13-4:1999 ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm
  • DIN 13-10:1999 ISO general purpose metric screw threads - Part 10: Nominal sizes for 6 mm fine pitch threads; nominal diameter from 70 mm to 500 mm
  • DIN 13-9:1999 ISO general purpose metric screw threads - Part 9: Nominal sizes for 4 mm fine pitch threads; nominal diameter from 40 mm to 300 mm
  • DIN 34818:2002-12 Sheet spring nuts with tappping screw thread
  • DIN ISO 965-2:1999-11 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998) / Note: To be amended by DIN ISO 965-2/A1 (2021-01).
  • DIN ISO 965-2 Berichtigung 1:2017-03 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998), Corrigendum to DIN ISO 965-2:1999-11
  • DIN 82010:1971 Round Eyes with Screwed Shank for Swivels and Turnbuckles
  • DIN 14-2:1987 ISO-metric screw thread; screw threads below 1 mm diameter; nominal dimensions
  • DIN 14-4:1987 ISO-metric screw thread; screw threads below 1 mm diameter; limits
  • DIN 82008:1971 Double Lugs with Screwed Shank for Swivels and Turnbuckles
  • DIN 14-1:1987 ISO-metric screw thread; screw threads below 1 mm diameter; basic profile
  • DIN 14-3:1987-02 ISO-metric screw thread; screw threads below 1 mm diameter; tolerances
  • DIN 14-4:1987-02 ISO-metric screw thread; screw threads below 1 mm diameter; limits
  • DIN EN 10226-2:2005-11 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation; German version EN 10226-2:2005
  • DIN EN 10226-1:2004-10 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation; German version EN 10226-1:2004
  • DIN 2510-8:1971-08 Bolted Connections with Reduced Shank; Threaded Holes for Studs
  • DIN EN 17490:2021 Determination of screw pull out forces from screw thread channels; German version EN 17490:2021
  • DIN 262-2:1973 Round Screw Thread with Clearance and Steep Flank with Pitch 7 mm; Limiting Dimensions of Screw Threads and Allowances-Permissible Deviations and Permissible Wear of Screw Thread Gauges
  • DIN 13-1:1999 ISO general purpose metric screw threads - Part 1: Nominal sizes for coarse pitch threads; nominal diameter from 1 mm to 68 mm
  • DIN 76-1:2016-08 Thread run-outs and thread undercuts - Part 1: For ISO metric threads in accordance with DIN 13-1 / Note: To be replaced by DIN 267-27 (2022-12).
  • DIN 103-7:1972 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Bolt Threads from 8 to 100 mm Nominal Diameter
  • DIN 103-5:1972 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 8 to 100 mm Nominal Diameter
  • DIN 103-6:1972 ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads from 105 to 300 mm Nominal Diameter
  • DIN 332-2:1983 Center holes 60° with thread for shaft ends for rotating electrical machines
  • DIN 82019:1993 Ramshorn shank hooks; shank with metric thread, with double lug and with eye
  • DIN 40401-1:1981 Gauges for edinson thread for d-type fuses "go" ring gauges
  • DIN 82006:1971 Oval Eyes with Screwed Shank for Swivels and Turnbuckles
  • DIN 65439:1984 Aerospace; bihexagonal head bolts, close tolerance, with MJ-thread, medium thread length, in steel, nominal tensile strength 1250 MPa, for temperatures up to 235 °C
  • DIN 8141-2:1993-07 ISO-metric screw threads; coarse pitch threads and fine pitch threads for interference fits in aluminium cast alloys; nominal diameter from 5 mm to 16 mm; gauges for internal and external threads
  • DIN EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation;English version of DIN EN 10226-2
  • DIN 30386:1976 Hexagonal nuts; rounded acme thread
  • DIN 34818:2002 Sheet spring nuts with tappping screw thread
  • DIN 431:2000 Pipe nuts with thread according to DIN ISO 228-1
  • DIN EN 24015:1991 Hexagon head bolts with reduced shank (shank diameter pitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991

ES-UNE, DIA in thread

SE-SIS, DIA in thread

  • SIS SMS 2171-1973 Metric screw threads. Tolerances. Limits of sizes for commercial bolt and nut threads. Medium quality
  • SIS SS-EN 148-2-1990 Respiratory protective devices — Threads for facepieces — Centre thread connection
  • SIS SMS 2171-1966 Metric screw threads. Tolerances. Limits of sizes for medium quality commercial bolt and nut threads
  • SIS 65 00 15-1951
  • SIS SS 3218-1984 Threaded stainless steel pipe fittings - Barrel nipples with external taper pipe threads
  • SIS SS-ISO 965/2:1984 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose bolt and nut threads- Medium quality
  • SIS SS 3194-1988 ISO inch screw threads- Hot dip galvanizing of external screw threads (UNC threads) - Tolerances and limits of sizes
  • SIS SS 1925-1988 ISO inch screw threads with coarse pitch - Screw thread tolerances for metal end of studs
  • SIS SS-ISO 5969:1987 Ground thread taps for pipe threads G and Rp - Tolerances on the threaded portion
  • SIS SMS 1746-1960
  • SIS SMS 1948-1969 Studs. Short tap end. Locking with run out of thread lnch screw threads. Coarse pitch
  • SIS SS 1924-1988 ISO general purpose metric screw threads with coarse pitch - Screw thread tolerances for metal end of studs
  • SIS SMS 1008-1946
  • SIS SS 2265-1985 Mechanical properties of fasteners - Bolts, screws and studs with ISO inch screw threads (UNC and UNF threads)
  • SIS SS 3224-1984 Threaded stainless steel pipe fittings - Plugs with external taper pipe thread
  • SIS SS 3213-1984 Threaded stainless steel pipe fittings - Tees with internal parallel pipe threads
  • SIS SS 1748-1979 Screw calliper gauges — Profiles and tolerances for setting plugs for ISO inch screw threads
  • SIS SMS 1460-1967 Studs. Short fixing end. Locking with run ou.t of thread Type PS. Metric screiv threads with coarse pitch.
  • SIS SS 3214-1984 Threaded stainless steel pipe fittings - Sockets with internal parallel pipe thread
  • SIS SS 3225-1984 Threaded stainless steel pipe fittings - Unions with internal parallel pipe threads
  • SIS SS 3211-1984 Threaded stainless steel pipe fittings - Elbows 90° with internal parallel pipe threads
  • SIS SS 3217-1984 Threaded stainless steel pipe fittings - Nipples with external parallel pipe thread

TZ-TBS, DIA in thread

  • TZS 171-1983 Tanzania Standard ISO General purpose metric screw threads — Tolerances: Limits of sizes for commercial bolt and nut threads — Medium quality

CU-NC, DIA in thread

  • NC 06-70-1969 ISO metric screw threads. Tolerances. Limits of sizes for medium quality commercial bolt and nut threads
  • NC 06-43-1969 Metric regular hexagon bolts threaded to the head
  • NC 06-34-1968 Holes for metric thread

U.S. Military Regulations and Norms, DIA in thread

International Organization for Standardization (ISO), DIA in thread

  • ISO 965-2:1998 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality
  • ISO 6696:1989 Cycles; screw threads used in bottom bracket assemblies
  • ISO 965-2:1973 Title missing - Legacy paper document
  • ISO 965-2:1998/Amd 1:2021 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality; Amendment 1
  • ISO 965-2:1980 ISO general purpose metric screw threads; Tolerances; Part 2 : Limits of sizes for general purpose bolt and nut threads; Medium quality
  • ISO/CD 965-2:2023 ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
  • ISO 5855-2:1999 Aerospace - MJ threads - Part 2: Limit dimensions for bolts and nuts
  • ISO 2857:1973 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches; Manufacturing tolerances on the threaded portion
  • ISO 3508:1976 Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262

Japanese Industrial Standards Committee (JISC), DIA in thread

  • JIS B 0209-2:2001 ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality
  • JIS B 1006:2009 Fasteners -- Thread run-outs for external thread in accordance with ISO general purpose metric screw threads
  • JIS B 1124:2003 Drilling screws with tapping screw thread
  • JIS B 1124:2015 Drilling screws with tapping screw thread

Danish Standards Foundation, DIA in thread

  • DS/ISO 965-2:1999 ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality
  • DS/EN 148-2/AC 1:1992 Respiratory protective devices. Threads for facepieces. Centre thread connection
  • DS/EN 17490:2021 Determination of screw pull out forces from screw thread channels
  • DS/EN 148-2:1999 Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection
  • DS/ISO 965/2:1981 ISO general purpose. Metric screw threads. Tolerances. Part 2: Limits of sizes for general purpose bolt and nut threads. Medium quality
  • DS/ISO 228/2:1985 Pipe threads where pressure-tight joints are not made on the threads. Part 2: Verification by means of limit gauges
  • DS/EN 10226-1:2005 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
  • DS/EN 10226-2:2006 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
  • DS 2016.4:1965 Hexagon nuts. B.S.W. thread. Finished

RO-ASRO, DIA in thread

Korean Agency for Technology and Standards (KATS), DIA in thread

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, DIA in thread

  • PREN 3296-1988 Rings@ Threaded@ Self- Locking@ Silver-Coated in FE-PA92HT(A286)

HU-MSZT, DIA in thread

(U.S.) Ford Automotive Standards, DIA in thread

  • FORD WA972-1996 THREAD DIMENSIONS FOR LOCKING THREADS - ROOT INTERFERENCE TYPE

BE-NBN, DIA in thread

Professional Standard - Machinery, DIA in thread

  • JB/ZQ 4310-2006 saw-tooth thread with pitch diameter center
  • JB/T 10031-1999 Gauges for pipe threads where pressure-tight joints are made on the threads
  • JB/ZQ 4168-2006 Pipe thread - Blank dimension before cutting inner and outer thread

NO-SN, DIA in thread

  • NS 1095-1963 UNC-threads for the metal end of studs - Tolerances on the threads
  • NS 5321-1977 Hand taps for pipe threads for taper threads
  • NS 5320-1977 Hand taps for pipe threads for parallel threads

FI-SFS, DIA in thread

VN-TCVN, DIA in thread

European Committee for Standardization (CEN), DIA in thread

  • EN 17490:2021 Determination of screw pull out forces from screw thread channels
  • EN 148-2:1999 Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection
  • EN 148-2:1992 CORRIGENDUM Respiratory Protective Devices; Threads for Facepieces; Centre Thread Connection
  • EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
  • CEN EN 10226-2-2005 Pipe threads where pressure tight joints are made on the threads — Part 2: Taper, external threads and taper internal threads — Dimensions, tolerances and designation
  • EN 148-2:1987/A1:1987 AMD 1 Respiratory Protective Devices; Threads for Facepieces; Centre Thread Connection

Lithuanian Standards Office , DIA in thread

  • LST EN 17490-2021 Determination of screw pull out forces from screw thread channels
  • LST EN 148-2-2001 Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection
  • LST EN 10226-1-2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
  • LST EN 10226-2-2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation

YU-JUS, DIA in thread

  • JUS N.E3.010-1985 Position ofholder thread in relation to central contact of the lampholder
  • JUS M.B0.514-1981 ISO Metric trapezoidal screw threads. Gauges for external and internat screw threads. Tolerances far thread gauges
  • JUS M.B1.003-1987 Metric threads. Drill diameters for use to tapping screvvs
  • JUS M.B0.600-1985 Taps for ISO metric threads. Tolerances on the threadedportion
  • JUS M.B1.644-1980 Thin nuts with small widths acrossfkts; with metric thread and metric fine thread

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, DIA in thread

  • GB/T 10922-1989 Gauges for pipe threads where pressure-tight joints are not made on the threads
  • GB/T 9145-2003 General purpose metric screw threads--Limits of sizes for the screw threads of medium quality and preferable plan

ZA-SANS, DIA in thread

  • SANS 50148-2:2003 Respiratory protective devices - Threads for facepieces Part 2: Centre thread connection
  • SANS 1700-2-6:2003 Fasteners Part 2: Screw threads Section 6: ISO general purpose metric screw threads - Tolerances - Limits of sizes for general purpose external and internal screw threads - Medium quality
  • SANS 1700-2-7:2003 Fasteners Part 2: Screw threads Section 7: ISO general purpose metric screw threads - Tolerances - Deviations for constructional screw threads

Military Standard of the People's Republic of China-General Armament Department, DIA in thread

  • GJB 3.2-1982 MJ threaded bolt and nut thread dimensions and tolerances
  • GJB 3.2A-2015 MJ Threads Part 2: Limiting Dimensions of Bolt and Nut Threads
  • GJB 3.3-1985 Dimensions and tolerances of MJ threaded pipe fittings threads
  • GJB 3.4-1985 Dimensions and tolerances of threads of MJ threaded structural parts
  • GJB 3.3A-2003 MJ threads Part 3: Limiting dimensions of pipe fitting threads
  • GJB 3.3A-2015 MJ threads Part 3: Limiting dimensions of pipe fitting threads

AR-IRAM, DIA in thread

United States Navy, DIA in thread

国家市场监督管理总局、中国国家标准化管理委员会, DIA in thread

  • GB/T 39522-2020 Metric series wires for the pitch diameters of screw threads

BR-ABNT, DIA in thread

GB-REG, DIA in thread

CEN - European Committee for Standardization, DIA in thread

  • EN 148-2:1987 Respiratory Protective Devices; Threads for Facepieces; Centre Thread Connection

Taiwan Provincial Standard of the People's Republic of China, DIA in thread

  • CNS 530-1978 Iso Metric Screw Threads-Tolerances-Limits of Sizes for Commercial Bolt and Nut Threads--Medium Quality
  • CNS 521-1955 Limit of Whitworth Threads (Medium and Coarse Fits)
  • CNS 513-1978 Metric Trapezoidal Screw Threads (Allowance and Tolerance for General Purpose Trapezoidal Screw Threads)
  • CNS 520-1955 Tolerance of Whitworth Threads (Medium and Coarse Fits)

CL-INN, DIA in thread

GOSTR, DIA in thread

  • GOST R 59110-2020 Motor vehicles. Fasteners. Thread run-outs and thread undercuts for ISO metric threads

American Society of Mechanical Engineers (ASME), DIA in thread

ES-AENOR, DIA in thread

RU-GOST R, DIA in thread

  • GOST R 12.4.215-1999 Occupational safety standards system. Respiratory protective devices. Thread for facepieces. Centre thread connection

Defense Logistics Agency, DIA in thread

Compressed Gas Association (U.S.), DIA in thread

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., DIA in thread

API - American Petroleum Institute, DIA in thread

  • API STD 6-A-1957 SPECIFICATION FOR THREADS IN VALVES@ FITTINGS@ AND FLANGES (Seventh Edition)
  • API STD 5B-1988 Specification for Threading@ Gaging@ and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (THIRTEENTH EDITION)
  • API SPEC 5B KAZAKH-2008 Specification for Threading@ Gauging and Thread Inspection of Casing@ Tubing@ and Line Pipe Threads (FIFTEENTH EDITION)
  • API STD 6-A-1947 SPECIFICATION FOR THREADS IN VALVES@ FITTINGS AND FLANGES (Tentative) (Fifth Edition)
  • API STD 6-A-1956 SPECIFICATION FOR THREADS IN VALVES@ FITTINGS@ AND FLANGES (Tentative) (Sixth Edition)

Standard Association of Australia （SAA）, DIA in thread

  • AS 1897:1976 Electroplated coatings on threaded components (metric coarse series)
  • AS 1214:1983 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series)

PL-PKN, DIA in thread

未注明发布机构, DIA in thread

  • BS 7715:1994(1999) Specification for Prevailing torque type bolts, screws and studs with non - metallic prevailing torque elements incorporated into the thread

American Society for Testing and Materials (ASTM), DIA in thread

  • ASTM F2328-17(2022) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts

TH-TISI, DIA in thread

  • TIS 339.1-3-1980 Standard for tolerances for iso general purpose metric screw threads.part Ⅰ: principles and basic data.part Ⅱ: limits of sizes for commercial bolt and nut thread.medium quality.part Ⅲ: deviations for constructional threads

  DIA in thread.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved