ZH
RU
ES

How to measure fracture toughness

How to measure fracture toughness, Total:255 items.

In the international standard classification, How to measure fracture toughness involves: Plastics, Conducting materials, Testing of metals, Textile fibres, Ceramics, Pipeline components and pipelines, Cutting tools, Materials for the reinforcement of composites, Paper and board, Welding, brazing and soldering, Lifting equipment, Non-ferrous metals, Reinforced plastics, Test conditions and procedures in general, Rubber and plastics products, Materials for aerospace construction, Waxes, bituminous materials and other petroleum products, Construction materials.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure fracture toughness

GB/T 41932-2022 Plastics—Determination of fracture toughness (GIC and KIC)—Linear elastic fracture mechanics (LEFM) approach
GB/T 31967.2-2015 Test method for physical property of rare earth permanent magnetic materials.Part 2:Determination of bending strength and fracture toughness
GB/T 28891-2012 Fibre-reinforced plastic composites.Determination of mode I interlaminar fracture toughness G<下标IC> for unidirectionally reinforced materials

国家市场监督管理总局、中国国家标准化管理委员会, How to measure fracture toughness

GB/T 38338-2019 Test method for fracture toughness of carbon materials
GB/T 38769-2020 Metallic materials－Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
GB/T 39484-2020 Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach

Association Francaise de Normalisation, How to measure fracture toughness

NF ISO 3060:2017 Fibres de coton- Détermination de la ténacité de rupture des faisceaux plats
NF G07-080:1972 Method for determination of breaking tenacity of flat bundles of cotton fibers.
NF A03-180:2006 Metallic materials - Determination of plane-strain fracture toughness.
NF G07-307:1987 Textiles - Essais des fibres - Détermination de la ténacité de rupture des faisceaux de fibres de laine.
NF A89-217*NF EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
NF EN ISO 15653:2018 Matériaux métalliques - Méthode d'essai pour la détermination de la ténacité quasi statique à la rupture des soudures
NF EN ISO 18756:2005 Céramiques techniques - Détermination de la ténacité à la rupture des céramiques monolithiques à température ambiante par fissuration superficielle en flexion
NF A89-217:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds.
NF A03-183:1987 Iron and steel - Mechanics of fracture - Determination from curve J-△a of the conventional characteristic values J and dJ/da of the ductile tear strength
NF EN ISO 15732:2005 Céramiques techniques - Méthode d'essai de ténacité à la rupture des céramiques monolithiques à température ambiante sur éprouvette préfissurée sur une seule face (méthode SEPB)
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
NF EN ISO 24370:2023 Céramiques techniques - Méthode d'essai de ténacité à la rupture des céramiques monolithiques à température ambiante sur éprouvette entaillée en chevron
NF L17-025*NF EN 6033:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I GIC
NF EN ISO 23146:2016 Céramiques techniques - Méthodes d'essai pour la détermination de la ténacité à la rupture des céramiques monolithiques - Méthode sur éprouvette à entaille en V sur une seule face (Méthode SEVNB)
NF L17-026*NF EN 6034:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
NF EN 6033:2016 Série aérospatiale - Matières plastiques renforcées de fibres de carbone - Méthode d'essai - Détermination de l'énergie de ténacité en rupture interlaminaire - Mode I - GIC
NF EN 6034:2016 Série aérospatiale - Matières plastiques renforcées de fibres de carbone - Méthode d'essai - Détermination de l'énergie de ténacité en rupture interlaminaire - Mode II - GIIC
NF B41-217*NF EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method.
NF B41-220-3*NF EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3 : chevron notched beam (CNB) method.
NF ISO 15024:2002 Composites plastiques renforcés de fibres - Détermination de la ténacité à la rupture interlaminaire en mode I, Gic, de matériaux composites à matrice polymère renforcés de fibres unidirectionnelles

British Standards Institution (BSI), How to measure fracture toughness

PD ISO/TS 28660:2022 Plastics. Determination of J-R curves. Fracture toughness
BS ISO 23524:2022 Plastics. Determination of fracture toughness of films and thin sheets. Essential work of fracture (EWF) method
BS 6729:1987 Method for determination of the dynamic fracture toughness of metallic materials
BS EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
BS EN ISO 12737:2011 Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 12737:2006 Metallic materials. Determination of plane-strain fracture toughness
BS EN ISO 12737:2010 Metallic materials. Determination of plane-strain fracture toughness
22/30389141 DC BS ISO 23524. Plastics. Determination of fracture toughness of films and thin sheets: the essential work of fracture (EWF) method
BS CWA 17793:2021 Test method for determination of the essential work of fracture of thin ductile metallic sheets
BS 7448-4:1997 Fracture mechanics toughness tests. Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials
PD ISO/TS 17958:2013 Paper and board. Determination of fracture toughness. Constant rate of elongation method (1,7 mm/s)
BS ISO 13586:2000 Plastics - Determination of fracture toughness (Gic and Kic) - Linear elastic fracture mechanics (LEFM) approach
BS ISO 13586:2018 Plastics. Determination of fracture toughness (GIC and KIC). Linear elastic fracture mechanics (LEFM) approach
BS ISO 12135:2021 Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
BS EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
BS 7448-3:2005 Fracture mechanics toughness tests - Part 3.Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
BS ISO 26843:2015 Metallic materials. Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
BS ISO 17281:2002 Plastics - Determination of fracture toughness (Gic and Kic) at moderately high loading rates (1 m/s)
17/30290146 DC BS ISO 18485. Peel test for the determination of interlaminar fracture toughness of flexible packaging laminates
15/30293838 DC BS ISO 12135. Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
20/30394397 DC BS ISO 12135. Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
BS EN ISO 15653:2018 Tracked Changes. Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds
BS 8571:2014 Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
BS 7448-1:1991 Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of metallic materials
BS EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
BS DD CEN/TS 14425-3:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3:Chevron notched beam (CNB) method
BS DD CEN/TS 14425-3:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Chevron notched beam (CNB) method
BS ISO 15024:2023 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
BS DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
BS ISO 15024:2002 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, $iGic, for unidirectionally reinforced materials
BS EN ISO 18756:2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 14425-5:2004 Advanced technical ceramics-Test methods for determination of fracture toughness of monolithic ceramics-Part 5:Single-edge vee-notch beam (SEVNB) method
BS DD CEN/TS 14425-5:2005 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Single-edge vee-notch beam (SEVNB) method
BS 8571:2018 Tracked Changes. Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
BS EN ISO 15732:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method
DD CEN/TS 14425-5:2004 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Single-edge vee-notch beam (SEVNB) method
BS EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Chevron notched beam (CNB) method
BS 7448-2:1997 Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials
BS EN ISO 24370:2023 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method
19/30377309 DC BS ISO 22838. Composites and reinforcements fibres. Determination of the fracture toughness of bonded plates of carbon fibre reinforced plastics (CFRPs) and metal using double cantilever beam specimens
BS ISO 17281:2018 Tracked Changes. Plastics. Determination of fracture toughness (G<sub>IC</sub> and K<sub>IC</sub>) at moderately high loading rates (1 m/s)

Korean Agency for Technology and Standards (KATS), How to measure fracture toughness

KS M ISO 13586-2012(2022) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
KS M ISO 13586-2012(2017) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
KS L 1600-2010(2020) Testing methods for fracture toughness of high performance ceramics
KS B ISO 12737:2002 Metallic materials-Determination of plane-strain fracture toughness
KS B ISO 12737:2015 Metallic materials－Determination of plane－strain fracture toughness
KS L 1608-1994 Testing method for fracture toughness of fine ceramics at elevated temperature
KS L 1608-2014 Testing method for fracture toughness of fines ceramics at elevated temperature
KS M ISO 13586:2007 Plastics--Determination of fracture toughness (GIC and KIC)--Linear elastic fracture mechanics(LEFM) approach
KS M ISO 11673:2005 Unplasticized polyvinylchloride(PVC-U) pressure pipes-Determination of the fracture toughness properties
KS M ISO 17958:2014 Paper and board — Determination of fracture toughness — Constant rate of elongation method(1.7 mm/s)
KS M ISO 11673-2005(2020) Unplasticized polyvinylchloride(PVC－U) pressure pipes－Determination of the fracture toughness properties
KS D ISO 12135:2005 Metallic materials-Unified method of test for the determination of quasistatic fracture toughness
KS D ISO 12135-2005(2010) Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
KS D ISO 12135:2013 Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
KS M ISO 13586:2012 Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
KS M ISO 17281-2007(2017) Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
KS M ISO 17281-2007(2022) Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
KS M ISO TS 17958:2020 Paper and board — Determination of fracture toughness —Constant rate of elongation method(1.7 mm/s)
KS L ISO 18756-2006(2016) Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure(SCF) method
KS M ISO 17281:2007 Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
KS L ISO 18756-2006(2021) Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure(SCF) method
KS L ISO 18756:2006 Fine ceramics(advanced ceramics, advanced technical ceramics)－Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure(SCF) method

American Society for Testing and Materials (ASTM), How to measure fracture toughness

ASTM E1820-18ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-18 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-06 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-05 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-05a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-16 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20b Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-18a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-22 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20ae1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-99a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-20e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-17a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-17 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-21 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-22e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-15 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11e2 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-06e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-08 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-08a Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-09 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-09e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-11 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-13e1 Standard Test Method for Measurement of Fracture Toughness
ASTM E1820-23b Standard Test Method for Measurement of Fracture Toughness
ASTM E1290-07e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
ASTM E1221-12a(2018) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM E1221-12A(2018)e1 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM E2818-11 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
ASTM E1221-96 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM E1221-96(2002) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM C1421-01a Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
ASTM C1421-01b(2007) Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421-09 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM C1421-10 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM D7779-20 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
ASTM B645-07 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
ASTM E1221-12 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM E1221-12a Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
ASTM C1421-99 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
ASTM C1421-15 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM E1221-06 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, K_Ia, of Ferritic Steels
ASTM C1421-01b Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
ASTM E1922-04(2015) Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
ASTM D7905/D7905M-19 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D7905/D7905M-19e1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D7905/D7905M-14 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

Society of Automotive Engineers (SAE), How to measure fracture toughness

SAE ARP1704-1981 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS Determination of
SAE ARP1704A-1981 Short-Bar Fracture Toughness of Metallic Materials, Determination Of
SAE AMS4249-1992 Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated (Requiring Fatigue and Fracture Toughness Testing)
SAE AMS4249A-2012 Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated (Requiring Fatigue and Fracture Toughness Testing)

SAE - SAE International, How to measure fracture toughness

SAE ARP1704A-1993 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS@ DETERMINATION OF
SAE AMS4249B-2018 Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti - 0.06Be (D357.0-T6) Solution and Precipitation Heat Treated (Requiring Fatigue and Fracture Toughness Testing) (UNS A43570)

International Organization for Standardization (ISO), How to measure fracture toughness

ISO/TS 28660:2022 Plastics — Determination of J-R curves — Fracture toughness
ISO 23524:2022 Plastics — Determination of fracture toughness of films and thin sheets — Essential work of fracture (EWF) method
ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
ISO 12737:1996 Metallic materials - Determination of the plane-strain fracture toughness
ISO 12737:2010 Metallic materials — Determination of plane-strain fracture toughness
ISO 13586:2018 Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) approach
ISO 13586:2000 Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>) - Linear elastic fracture mechanics (LEFM) approach
ISO 11673:2005 Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes - Determination of the fracture toughness properties
ISO 15653:2018 Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
ISO 12135:2002 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO/TS 17958:2013 Paper and board - Determination of fracture toughness - Constant rate of elongation method (1,7 mm/s)
ISO 12135:2016 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 12135:2021 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
ISO 26843:2015 Metallic materials - Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
ISO 12135:2002/Cor 1:2008 Metallic materials — Unified method of test for the determination of quasistatic fracture toughness TECHNICAL CORRIGENDUM 1
ISO 17281:2002 Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>) at moderately high loading rates (1 m/s)
ISO 17281:2018 Plastics - Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
ISO 18756:2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
ISO 13586:2000/Amd 1:2003 Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>); Linear elastic fracture mechanics (LEFM) approach - Amendment 1: Guidelines for the testing of injection-moulded plastics containing discontinous reinforcing fibres
ISO 24370:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method

PL-PKN, How to measure fracture toughness

PN H04335-1987 Metals Test method for piane — strain fracture toughness
PN H04336-1988 Metals Test method of fracture toughness by measurement critic value J integral, Jlc

Japanese Industrial Standards Committee (JISC), How to measure fracture toughness

JIS R 1668:2005 Testing method for fracture toughness of porous fine ceramics
JIS R 1617:2010 Testing method for fracture toughness of fine ceramics at elevated temperature
JIS Z 2284:1998 Method of elastic-plastic fracture toughness Jic testing for metallic materials in liquid helium

CEN - European Committee for Standardization, How to measure fracture toughness

EN ISO 12737:2010 Metallic materials - Determination of plane-strain fracture toughness
EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
PD CEN/TS 14425-5:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolitic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method

European Committee for Standardization (CEN), How to measure fracture toughness

EN ISO 12737:1999 Metallic Materials - Determination of Plane-Strain Fracture Toughness
EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
EN 6033:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC
EN 6034:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
EN 843-7:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
PD CEN/TS 14425-3:2003 Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 3: Chevron notched beam (CNB) method
PD CEN/TS 14425-1:2003 Advanced technical ceramics Test methods for determination of fracture toughness of monolithic ceramics Part 1:Guide to test method selection
EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
EN 843-8:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests
EN ISO 23146:2016 Fine ceramics (advanced ceramics@ advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method
EN ISO 24370:2023 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method (ISO 24370:2005)

German Institute for Standardization, How to measure fracture toughness

DIN EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2005); English version of DIN EN ISO 12737
DIN EN ISO 15653:2018-06 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018); German version EN ISO 15653:2018
DIN EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
DIN EN ISO 12737:2011 Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010); German version EN ISO 12737:2010
DIN EN ISO 18756:2005-09 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003); German version EN ISO 18756:2005
DIN EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003); German version EN ISO 18756:2005
DIN EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010); German version EN ISO 15653:2010
DIN EN 6033:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC; German and English version EN 6033:2015
DIN EN 6033:2016-02 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC; German and English version EN 6033:2015
DIN EN 6034:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - G[IIC]; German and English version EN 6034:2015
DIN EN 6034:2016-02 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - G[IIC]; German and English version EN 6034:2015
DIN CEN/TS 14425-5:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolitic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method; German version CEN/TS 14425-5:2004
DIN CEN/TS 14425-1:2003-11 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
DIN CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection; German version CEN/TS 14425-1:2003
DIN SPEC 1026:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010
DIN EN ISO 24370:2023-06 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method (ISO 24370:2005); German version EN ISO 24370:2023
DIN EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method; German version EN 14425-3:2010

未注明发布机构, How to measure fracture toughness

DIN EN ISO 12737:1999 Metallic materials – Determination of plane-strain fracture toughness
BS 7448-3:2005(2007) Fracture mechanics toughness tests — Part 3 : Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa · m0.5 sp1
BS 7448-4:1997(2001) Fracture mechanics toughness tests — Part 4 : Method for determination of fracture resistance curves and initiation values for stable crack extension in metallic materials
BS 7448-1:1991(2002) Fracture mechanics toughness tests — Part 1 : Method for determination of KIc, critical CTOD and critical J values of metallic materials
BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

WRC - Welding Research Council, How to measure fracture toughness

BULLETIN 266-1981 WELDABILITY AND FRACTURE TOUGHNESS OF 5% NI STEEL – PART 1: WELD SIMULATION TESTING ; WELDABILITY AND FRACTURE TOUGHNESS OF 5% NI STEEL – PART 2: WIDE PLATE TESTING
BULLETIN 120-1967 THE PROPERTIES AND MICROSTRUCTURE OF SPRAY-QUENCHED THICK-SECTION STEELS;DETERMINATION OF FRACTURE TOUGHNESS OF HEAVY-SECTION PRESSURE VESSEL STEELS USING A FRACTURE MECHANICS APPROACH; NOTCH PROPERT
BULLETIN 279-1982 WELDABILITY AND FRACTURE TOUGHNESS OF QUENCHED AND TEMPERED 9% NICKEL STEEL: PART I – WELD SIMULATION TESTING; AND PART II – WIDE PLATE TESTING
BULLETIN 299-1984 ENGINEERING ASPECTS OF CTOD FRACTURE TOUGHNESS TESTING ; THREE-DIMENSIONAL ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS OF THREE-POINT BEND SPECIMEN ; FAILURE PREDICTION OF NOTCHED PRESSURE VESSELS USING T

Professional Standard - Machinery, How to measure fracture toughness

JB/T 12616-2016 Inspection methods of fracture toughness for hardmetals tool base material

The Aluminum Association, How to measure fracture toughness

AA T-5-1987 Position on Fracture Toughness Requirements and Quality Control Testing

American National Standards Institute （ANSI), How to measure fracture toughness

ANSI/ASTM D7779:2011 Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

PK-PSQCA, How to measure fracture toughness

PS 595-1983 PAKISTAN STANDARD METHOD FOR DETERMINA-TION OF BREAKING LOAD, ELONGATION AT BREAK AND TENACITY OF JUTE YARNS. (1st Revision)

YU-JUS, How to measure fracture toughness

JUS C.A4.084-1995 Mechanical testing of metals - Methods of tests for plane strain fracture toughness (K IC)

Danish Standards Foundation, How to measure fracture toughness

DS/EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
DS/EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method
DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
DS/CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1: Guide to test method selection
DS/CEN/TS 14425-5:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 5: Single-edge vee-notch beam (SEVNB) method

ES-UNE, How to measure fracture toughness

UNE-EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
UNE-EN ISO 15732:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003) (Endorsed by AENOR in August of 2005.)
UNE-EN 6034:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC (Endorsed by AENOR in January of 2016.)
UNE-EN 6033:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC (Endorsed by AENOR in January of 2016.)
UNE-EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003) (Endorsed by AENOR in August of 2005.)

American Welding Society (AWS), How to measure fracture toughness

WRC 279:1982 Part 1: Weldability and Fracture Toughness of Quenched and Tempered 9% Nickel Steel: Weld Simulation Testing
WRC 266:1981 Part 1: Weldability and Fracture Toughness of 5% Ni Steel-Part 1: Weld Simulation Testing

Lithuanian Standards Office , How to measure fracture toughness

LST EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
LST EN 14425-3-2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
LST EN ISO 18756:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003)
LST EN ISO 15732:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003)

AENOR, How to measure fracture toughness

UNE-EN ISO 15653:2011 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)

RU-GOST R, How to measure fracture toughness

GOST R 57206-2016 Polymer composites. Test method of determination of the mode II fracture toughness for the calibrated end-loaded split (C-ELS)
GOST R 56808-2015 Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites
GOST 33685-2015 Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC
GOST R 56740-2015 Polymer composites. Method for determination of translaminar fracture toughness characteristic of polymer composite laminates and pultruded polymer composites

KR-KS, How to measure fracture toughness

KS M ISO TS 17958-2020 Paper and board — Determination of fracture toughness —Constant rate of elongation method(1.7 mm/s)

IT-UNI, How to measure fracture toughness

UNI 7227-1973

The American Road & Transportation Builders Association, How to measure fracture toughness

AASHTO T 393-2021 Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using the Illinois Flexibility Index Test (I-FIT)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, How to measure fracture toughness

PREN 6034-1995 Aerospace Series Carbon Fibre Reinforced Plastics Test Method Determination of Interlaminar Fracture Toughness Energy Mode II - GIIc (Edition P1)
PREN 6033-1995 Aerospace Series Carbon Fibre Reinforced Plastics Test Method Determination of Interlaminar Fracture Toughness Energy Mode I - GIc (Edition P1)

American Society of Mechanical Engineers (ASME), How to measure fracture toughness

ASME N-629-2001 Use of Fracture Toughness Test Data to Establish Reference Temperature for Pressure Retaining Materials Section XI, Division 1; SUPP 6 R(2002)
ASME N-631-2001 Use of Fracture Toughness Test Data to Establish Reference Temperature for Pressure Retaining Materials Other than Bolting for Class 1 Vessels Section III, Division 1