ZH
RU
ES

Sample peak impurity

Sample peak impurity, Total:500 items.

In the international standard classification, Sample peak impurity involves: Organic chemicals, Fuels, Spices and condiments. Food additives, Construction materials, Software development and system documentation, Farming and forestry, Tobacco, tobacco products and related equipment, Analytical chemistry, Physics. Chemistry, Products of the chemical industry, Quality, Fruits. Vegetables, Soil quality. Pedology, Inorganic chemicals, Petroleum products in general, Testing of metals, General methods of tests and analysis for food products, Water quality, Space systems and operations, Ceramics, Powder metallurgy, Fertilizers, Semiconducting materials, Standardization. General rules, Jewellery, Crude petroleum, Beverages, Protection against dangerous goods, Meat, meat products and other animal produce, Cereals, pulses and derived products, Farm buildings, structures and installations, Pharmaceutics, Air quality, Vocabularies, Electronic display devices, Products of the textile industry, Lamps and related equipment, Bearings, Metrology and measurement in general, Metalliferous minerals, Plastics, Non-metalliferous minerals, Non-ferrous metals, Prepackaged and prepared foods, Tea. Coffee. Cocoa, Geology. Meteorology. Hydrology, Veterinary medicine, Information sciences. Publishing, Astronomy. Geodesy. Geography, Milk and milk products, Road vehicle systems, Electrical engineering in general, Electronic components in general, Mining equipment, Environmental protection, Construction industry, Mining and quarrying, Aircraft and space vehicles in general, Character sets and information coding, Graphic technology, Textile fibres, Applications of information technology, Surface treatment and coating, Document imaging applications.

American Society for Testing and Materials (ASTM), Sample peak impurity

ASTM UOP1026-19 Trace BTEX Impurities in LPG Samples by Gas Chromatography
ASTM UOP714-87 Metals in Miscellaneous Samples by ICP-AES
ASTM E1746-95(2001)e1 Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
ASTM E1746-95 Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
ASTM G121-98 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G121-98(2004) Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G121-98(2010)e1 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM E768-99(2005) Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
ASTM E768-99 Standard Practice for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
ASTM E768-99(2010) Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
ASTM E1746-17 Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
ASTM E1746-17a Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
ASTM E1746-08 Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
ASTM D4306-12 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM C1336-96(2002) Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
ASTM C1336-96 Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
ASTM B665-03 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM D2276-05 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D2276-22 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D2276-06(2014) Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
ASTM D4306-13 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D4306-15 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM C1336-96(2008) Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
ASTM C1336-96(2014) Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
ASTM D4306-97 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D4306-01 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D4306-12a Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D4306-12b Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM D4306-12c Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
ASTM E1298-89(2000) Standard Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products
ASTM E1298-89(1994) Standard Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products
ASTM E1298-06 Standard Guide for Determination of Purity, Impurities, and Contaminants in Biological Drug Products
ASTM F318-04 Standard Practice for Sampling Airborne Particulate Contamination in Clean Rooms for Handling Aerospace Fluids
ASTM F318-06 Standard Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
ASTM D8082-18 Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application
ASTM B665-19 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM B665-08 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM B665-08(2012) Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides
ASTM D5115-90(1996) Standard Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF
ASTM D5115-90(2004) Standard Test Method for Collecting Gross Samples and Determining the Fuel Quality of RDF
ASTM E897-88(2004) Standard Test Method for Volatile Matter in the Analysis Sample of Refuse-Derived Fuel

VN-TCVN, Sample peak impurity

TCVN 4891-2013 Spices and condiments.Determination of extraneous matter and foreign matter content
TCVN 4587-1988 Canned foods.Determination of mineral foreign matter content
TCVN 4184-1986 Textiles.Cotton fibres.Determination of impurities and defects
TCVN 5666-1992 Biological substances.Methods for sampling and storaging of samples
TCVN 7805-2007 Fruit and vegetable products.Determination of mineral impurities content
TCVN 6647-2007 Soil quality.Pretreatment of samples for physico-chemical analysis
TCVN 6663-15-2004 Water quality.Sampling.Part 15: Guidance on preservation and handling of sludge and sediment samples

International Organization for Standardization (ISO), Sample peak impurity

ISO 927:2009 Spices and condiments - Determination of extraneous matter and foreign matter content
ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
ISO 927:1980 Title missing - Legacy paper document
ISO 927:1982 Spices and condiments; Determination of extraneous matter content
ISO 762:2003 Fruit and vegetable products - Determination of mineral impurities content
ISO 762:1982 Fruit and vegetable products; Determination of mineral impurities content
ISO 5667-3:1985 Water quality — Sampling — Part 3: Guidance on the preservation and handling of samples
ISO/TS 13278:2017 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
ISO 5667-3:1994 Water quality - Sampling - Part 3: Guidance on the preservation and handling of samples
ISO 18512:2007 Soil quality - Guidance on long and short term storage of soil samples
ISO 4489:1978 Sintered hardmetals; Sampling and testing
ISO 5667-15:2009 Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples
ISO 13947:2007 Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
ISO 13947:2011 Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
ISO 605:1991 Pulses; determination of impurities, size, foreign odours, insects, and species and variety; test methods
ISO 5667-5:1991 Water quality; sampling; part 5: guidance on sampling of drinking water and water used for food and beverage processing
ISO 1572:1975 Title missing - Legacy paper document
ISO 11464:2006 Soil quality - Pretreatment of samples for physico-chemical analysis
ISO 11464:1994 Soil quality - Pretreatment of samples for physico-chemical analyses
ISO 1572:1980 Tea; Preparation of ground sample of known dry matter content
ISO/CD 13947:2023 Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
ISO/DIS 13947:2022 Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
ISO 5667-15:1999 Water quality - Sampling - Part 15: Guidance on preservation and handling of sludge and sediment samples
ISO 11063:2012 Soil quality - Method to directly extract DNA from soil samples
ISO/IEC 29794-1:2016 Information technology - Biometric sample quality - Part 1: Framework
ISO/IEC 29794-1:2009 Information technology - Biometric sample quality - Part 1: Framework
ISO/IEC 29794-4:2017 Information technology — Biometric sample quality — Part 4: Finger image data
ISO 25597:2013 Stationary source emissions - Test method for determining PM<(Index)2,5> and PM<(Index)10> mass in stack gases using cyclone samplers and sample dilution

European Committee for Standardization (CEN), Sample peak impurity

EN ISO 927:2009 Spices and condiments - Determination of extraneous matter and foreign matter content (ISO 927:2009)
EN ISO 927:2009/AC:2012 Spices and condiments - Determination of extraneous matter and foreign matter content - Technical Corrigendum 1 (ISO 927:2009/Cor 1:2012)
EN 16602-70-07:2014 Space product assurance - Verification and approval of automatic machine wave soldering
FprCEN/TS 17733-2021 Soil improvers and growing media - Sampling and sample preparation
CEN/TS 17733:2022 Soil improvers and growing media - Sampling and sample preparation
EN 1948-4:2010 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs (Incorporates Amendment A1: 2013)
EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples
EN ISO 3785:1995 Steel - Designation of Test Piece Axes (ISO 3785:1976)
EN ISO 5667-3:2003 Water Quality - Sampling - Part 3: Guidance on the Preservation and Handling of Samples ISO 5667-3:2003
CEN/TR 16220:2011 Construction products - Assessment of release of dangerous substances - Complement to sampling
EN ISO 5667-15:2009 Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009)
EN 1948-4:2010+A1:2013 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
BS EN ISO 16720:2007 Freeze-drying method for sample pretreatment for continuous soil analysis
EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
EN ISO 20130:2020 Soil quality - Measurement of enzyme activity patterns in soil samples using colorimetric substrates in micro-well plates (ISO 20130:2018)

British Standards Institution (BSI), Sample peak impurity

BS EN ISO 927:2009 Spices and condiments - Determination of extraneous matter and foreign matter content
BS EN 14488-3:2006 Testing sprayed concrete - Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
PD ISO/TS 13278:2017 Nanotechnologies. Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
BS PD ISO/TS 13278:2017 Nanotechnologies. Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
BS DD ISO/TS 13278:2011 Nanotechnologies. Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
BS ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
BS 8550:2010 Guide for the auditing of water quality sampling
BS ISO 762:2003 Fruit and vegetable products - Determination of mineral impurities content
BS EN ISO 5667-16:2017 Tracked Changes. Water quality. Sampling. Guidance on biotesting of samples
PD CEN/TS 17733:2022 Soil improvers and growing media. Sampling and sample preparation
BS 4585-1:1983 Methods of test for spices and condiments - Determination of extraneous matter
BS EN 1482-3:2016 Fertilizers and liming materials. Sampling and sample preparation. Sampling of static heaps
BS 6068-6.15:1999 Water quality - Sampling - Guidance on preservation and handling of sludge and sediment samples
BS EN ISO 5667-15:2009 Water quality - Sampling - Guidance on the preservation and handling of sludge and sediment samples
BS EN 1948-4:2010 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs
BS ISO 18512:2008 Soil quality. Guidance on long and short term storage of soil samples
BS EN 12127:1998 Textiles - Fabrics - Determination of mass per unit area using small samples
BS 5598-10:1983 Methods of sampling and test for halogenated hydrocarbons - Determination of impurities in methyl chloride, gas chromatographic method
BS EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
BS ISO 14507:2003 Soil quality - Pretreatment of samples for determination of organic contaminants
BS EN 1948-4:2010+A1:2013 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs
BS ISO 11464:2006 Soil quality - Pretreatment of samples for physio-chemical analysis
BS ISO 13947:2011 Metallic powders. Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
BS EN ISO 16720:2008 Soil quality - Pretreatment of samples by freeze-drying for subsequent analysis
BS ISO 18512:2007 Soil quality. Guidance on long and short term storage of soil samples
DD IEC/PAS 62596:2009 Electrotechnical products. Determination of restricted substances. Sampling procedure. Guidelines
BS ISO 14560:2004 Acceptance sampling procedures by attributes. Specified quality levels in nonconforming items per million
BS ISO/IEC 29794-6:2015 Information technology. Biometric sample quality. Iris image data
BS ISO 6741-3:1987 Textiles. Fibres and yarns. Determination of commercial mass of consignments. Specimen cleaning procedures
BS 6068 Sec.6.5:1991 Water quality. Sampling. Guidance on sampling of drinking water and water used for food and beverage processing
BS ISO 6741-3:2002 Textiles - Fibres and yarns - Determination of commercial mass of consignments - Specimen cleaning procedures
BS EN 62321-2:2014 Determination of certain substances in electrotechnical products. Disassembly, disjointment and mechanical sample preparation
BS EN 14407:2014 Water quality. Guidance for the identification and enumeration of benthic diatom samples from rivers and lakes
BS DD CEN/TS 15439:2006 Biomass gasification — Tar and particles in product gases — Sampling and analysis
BS DD CEN/TS 15439:2007 Biomass gasification. Tar and particles in product gases Sampling and analysis
BS ISO/TR 12031:2000 Micrographics. Inspection of silver-gelatin microforms for evidence of deterioration

German Institute for Standardization, Sample peak impurity

DIN EN ISO 927:2010 Spices and condiments - Determination of extraneous matter and foreign matter content (ISO 927:2009); German version EN ISO 927:2009
DIN EN 1014-2:2010-11 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2 : Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis; German version EN 1014-2:2010
DIN 10362:1975 Fruit and vegetable products; determination of mineral impurities
DIN EN ISO 5667-16:2019-03 Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:2017); German version EN ISO 5667-16:2017
DIN CEN/TS 17733:2022-05 Soil improvers and growing media - Sampling and sample preparation; German version CEN/TS 17733:2022
DIN EN ISO 5667-16:2019 Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:2017)
DIN EN ISO 16665:2014-06 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna (ISO 16665:2014); German version EN ISO 16665:2013
DIN ISO 18400-105:2020-11 Soil quality - Sampling - Part 105: Packaging, transport, storage and preservation of samples (ISO 18400-105:2017)
DIN EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture (ISO 3785:2006); English version of DIN EN ISO 3785:2006-05
DIN EN 12127:1997-12 Textiles - Fabrics - Determination of mass per unit area using small samples; German version EN 12127:1997
DIN EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples; German version EN 12127:1997
DIN ISO 18512:2009 Soil quality - Guidance on long and short term storage of soil samples (ISO 18512:2007); English version of DIN ISO 18512:2009-03
DIN EN ISO 5667-15:2010-01 Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009); German Version EN ISO 5667-15:2009
DIN ISO 18512:2009-03 Soil quality - Guidance on long and short term storage of soil samples (ISO 18512:2007)
DIN ISO 18400-105:2020 Soil quality - Sampling - Part 105: Packaging, transport, storage and preservation of samples (ISO 18400-105:2017)
DIN EN ISO 6644:2007 Flowing cereals and milled cereal products - Automatic sampling by mechanical means (ISO 6644:2002); German version EN ISO 6644:2007
DIN 51940:2012 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN 51940:2012-03 Testing of carbonaceous materials - Sampling and sample preparation - Solid materials, solid binders and impregnants
DIN 54389:2020-07 Solid recovered fuels - Obtaining representative laboratory samples from heterogeneous materials by bale sampling
DIN EN 1482-3:2016 Fertilizers and liming materials - Sampling and sample preparation - Part 3: Sampling of static heaps; German version EN 1482-3:2016
DIN ISO 12308:1998 Plain bearings - Quality assurance - Sample types; definitions, applications and testing (ISO 12308:1994)
DIN 10806:2016-07 Analysis of tea - Preparation of ground sample of defined dry matter content
DIN EN 14407:2014-07 Water quality - Guidance for the identification and enumeration of benthic diatom samples from rivers and lakes; German version EN 14407:2014
DIN ISO 12308:2019-11 Plain bearings - Quality assurance of sample types - Definitions, applications and testing (ISO 12308:2017)

PL-PKN, Sample peak impurity

PN A75101-17-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of organie impurities content
PN A86744-1953 Fish products -- Determination of mineral impurities
PN A75101-18-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of minera? impurities content
PN C04089-1958 Petroleum products -- Determination of solid foreign matter content
PN C04094-1971 Petroleum products De?ermino?ion of foreign par?icles by ?he Budaroys method
PN A75111-1986 Fruit and vegetable products Determination of mineral impurities
PN C04141-1955
PN G01400-1987 Solid raw materials Geological samples Archivization
PN A74104-1986 Baked goods Sampling and qualit inspection
PN P04692-1974 Testing methods of textile produks Beaten felts Determination of plant impurities content
PN C80047-1988 Reagents and specially pure substance Guide for sampling and preparation of laboratory sample

国家市场监督管理总局、中国国家标准化管理委员会, Sample peak impurity

GB/T 36457-2018 Modeling method of complex product virtual prototype
GB/T 38358-2019 Sampling method of quality monitoring for E-commerce product

RO-ASRO, Sample peak impurity

STAS 8302-1979 FISH PRODUCTS Determination of mineral impurities
STAS 10550-1976 SILICEOUS MINING PRODUCTS Sampling and sample preparation
STAS 5959-1970 PRODUCTS DERIVED FROM FRUITS AND VEGETABLES Detcrmination of mineral impurities
STAS 9763/10-1976 SPICES AND CONDIMENTS Determination of extraneous matter content
STAS 9472/1-1982 Sintered hard alloys SAMPLING AND PREPARATION OF SAMPLES
STAS 4755-1963
STAS 9535/2-1987 MILK AND MILK PRODUCTS Instruments for sampling Technical requirements tor quality
STAS 2213/2-1984 SWEETS Rules for quality control and preparation ol samples for testing
STAS 6094-1990 Fibrous semi-products of pulp and paper industry. Sampling for tests and rules for quality checking up
STAS 9682/13-1990 Stimulants TEA Preparation of ground samples of known dry matter content

Professional Standard - Machinery, Sample peak impurity

JB/T 53211-1999 Product quality classification of reciprocating impurity pumps

Association Francaise de Normalisation, Sample peak impurity

NF P18-511-3*NF EN 14488-3:2006 Testing sprayed concrete - Part 3 : flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
XP ISO/TS 13278:2018 Nanotechnologies - Dosage des impuretés dans les échantillons nanotubes de carbone (CNT) par spectroscopie de masse à plasma induit (ICP-MS)
NF X31-114*NF ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
XP T16-207*XP ISO/TS 13278:2018 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
NF EN 1014-2:2010 Produits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse - Partie 2 : procédure pour obtenir un échantillon de créosote du bois créosoté à soumettre à une analyse ultérieure
NF ISO 23909:2008 Qualité du sol - Préparation des échantillons de laboratoire à partir d'échantillons de grande taille
NF V32-172*NF EN ISO 927:2009 Spices and condiments - Determination of extraneous matter and foreign matter content
NF V03-401:1985 Spices and condiments. Determination of extraneous matter content.
NF T90-511-16*NF EN ISO 5667-16:2017 Water quality - Sampling - Part 16 : guidance on biotesting of samples
NF EN ISO 5667-16:2017 Qualité de l'eau - Échantillonnage - Partie 16 : lignes directrices pour les essais biologiques des échantillons
XP U44-710*XP CEN/TS 17733:2022 Soil improvers and growing media - Sampling and sample preparation
XP CEN/TS 17733:2022 Amendements du sol et supports de culture - Echantillonnage et préparation de l'échantillon
NF V05-103:1984 Products derived from fruits and vegetables. Determination of mineral impurities content.
NF EN 12127:1998 Textiles - Étoffes - Détermination de la masse surfacique sur de petits échantillons.
NF T90-513:1996 Water quality. Sampling. Part 3 : guidance on the preservation and handling of samples.
NF EN ISO 4884:2019 Métaux-durs - Échantillonnage et essais des poudres au moyen d'éprouvettes frittées
NF EN ISO 16665:2014 Qualité de l'eau - Lignes directrices pour l'échantillonnage quantitatif et le traitement d'échantillons de la macrofaune marine des fonds meubles
NF X31-607*NF ISO 18512:2007 Soil quality - Guidance on long and short term storage of soil samples
NF X31-009-105*NF ISO 18400-105:2017 Soil quality - Sampling - Part 105 : packaging, transport, storage and preservation of samples
NF ISO 18400-105:2017 Qualité du sol - Échantillonnage - Partie 105 : emballage, transport, stockage et conservation des échantillons
NF A02-016*NF EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
NF T51-046:1997 Plastics - Polyvinyl chloride resins. Determination of number of impurities and foreign particles.
NF ISO 605:1991 Légumineuses - Détermination des impuretés, des dimensions, des odeurs étrangères, des insectes et des espèces et variétés - Méthodes d'examen
NF EN ISO 5667-15:2009 Qualité de l'eau - Échantillonnage - Partie 15 : lignes directrices pour la conservation et le traitement des échantillons de boues et de sédiments
NF X33-041*NF EN ISO 5667-15:2009 Water quality - Sampling - Part 15 : guidance on the preservation and handling of sludge and sediment samples
NF G07-170*NF EN 12127:1998 Textiles. Fabrics. Determination of mass per unit area using small samples.
NF ISO 18512:2007 Qualité du sol - Lignes directrices relatives au stockage des échantillons de sol à long et à court termes
NF V03-341:1981 Tea. Preparation of ground sample of known dry matter content.
FD P01-023*FD CEN/TR 16220:2011 Construction products - Assessment of release of dangerous substances - Complement to sampling
NF EN 61115:1994 Expression des qualités de fonctionnement des systèmes de manipulation d'échantillon pour analyseurs de processus
NF X43-014:2017 Air quality - Ambient air - Determination of total atmospheric deposition - Sampling - Preparation of samples prior analysis
NF EN 1875-3:2023 Supports textiles revêtus de caoutchouc ou de plastique - Détermination de la résistance au déchirement - Partie 3 : méthode sur éprouvettes trapézoïdales (calcul des cinq pics les plus hauts)
NF U42-090:1983 Fertilizers. Calcium and magnesium liming materials. Solid products. Preparation of test sample.
NF EN 14407:2014 Qualité de l'eau - Guide pour l'identification et le dénombrement des échantillons de diatomées benthiques de rivières et de lacs
FD CEN/TR 16220:2011 Produits de construction - Évaluation de l'émission de substances dangereuses - Complément relatif à l'échantillonnage
NF EN 12938:2000 Méthodes d'analyse de l'étain pour la fabrication d'objets - Détermination de la teneur en alliages et en impuretés par spectrométrie atomique
NF X43-014:2003 Air quality - Ambient air - Determination of total atmospheric deposition - Sampling - Preparation of samples prior analysis.
NF C05-100-2*NF EN IEC 62321-2:2021 Determination of certain substances in electrotechnical products - Part 2 : sisassembly, disjointment and mechanical sample preparation
NF T90-711*NF EN 14407:2014 Water quality - Guidance for the identification and enumeration of benthic diatom samples from rivers and lakes

Inner Mongolia Provincial Standard of the People's Republic of China, Sample peak impurity

DB15/T 376-2002 Regulations of the qualities judging of food grains other than wheat and rice in storage
DB15/T 1171-2017 Evaluation of Nutritional Quality and Balance Degree of Dairy Cow Diet Samples

Professional Standard - Tobacco, Sample peak impurity

YC/T 145.11-2012 Tobacco flavor.Pretreatment method of complex samples

AENOR, Sample peak impurity

UNE 40228-7:1974 DETERMINATION OF THE CONTENT IN VEGETABEL MATTER ANDOF THE TOTAL OF INSOLUBLE IMPURITIES IN ALKALI OF WASHED WOOL SUBSAMPLES.
UNE-EN 1014-2:2010 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis
UNE 67039:1993 EX CERAMIC PRODUCTS OF COOKED CLAY. DETERMINATION OF CALCAREOUS INCLUSIONS.
UNE-EN ISO 5667-16:2017 Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:2017)
UNE-EN ISO 16665:2014 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna (ISO 16665:2014)
UNE-EN 14407:2015 Water quality - Guidance for the identification and enumeration of benthic diatom samples from rivers and lakes
UNE-EN ISO 5667-15:2010 Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009)
UNE-EN 12127:1998 TEXTILES. FABRICS. DETERMINATION OF MASS PER UNIT AREA USING SMALL SAMPLES.

Danish Standards Foundation, Sample peak impurity

DS/ISO/TS 13278:2012 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
DS/EN 1014-2:2010 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis
DS/EN ISO 5667-16:1999 Water quality - Sampling - Part 16: Guidance on biotesting of samples
DS/EN ISO 16665:2006 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
DS/EN 12127:1998 Textiles - Fabrics - Determination of mass per unit area using small samples
DS/ISO 11464:2007 Soil quality - Pretreatment of samples for physico-chemical analysis
DS/EN ISO 5667-15:2010 Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples
DS/IEC/PAS 62596:2009 Electrotechnical products - Determination of restricted substances - Sampling procedure - Guidelines
DS/ISO 18512:2007 Soil quality - Guidance on long and short term storage of soil samples
DS/EN ISO 3785:2006 Metallic materials - Designation of test specimen axes in relation to product texture
DS/CEN/TR 16220:2012 Construction products - Assessment of release of dangerous substances - Complement to sampling
DS/EN ISO 11063:2013 Soil quality - Method to directly extract DNA from soil samples
DS/ISO 6741-3:1989 Textiles. Fibres and yarns. Determination of commercial mass of consignments. Part 3: Specimen cleaning procedures
DS/ISO 23893-1:2008 Water quality - Biochemical and physiological measurements on fish - Part 1: Sampling of fish, handling and preservation of samples
DS/ISO 14507:2004 Soil quality - Pretreatment of samples for determination of organic contaminants

International Electrotechnical Commission (IEC), Sample peak impurity

ISO/TS 13278:2011 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
ISO TS 13278:2011 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
ISO/TS 13278:2011 Nanotechnologies - Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry
IEC PAS 62596:2009 Electrotechnical products - Determination of restricted substances - Sampling procedure - Guidelines

HU-MSZT, Sample peak impurity

TR-TSE, Sample peak impurity

TS 1127-1972 FRUIT AND VEGATABLE PRODUCTS DETERMINATION OF M?NERAL IMPURITIES

Lithuanian Standards Office , Sample peak impurity

LST EN 1014-2-2010 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis
LST EN ISO 5667-16:2000 Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:1998)
LST ISO 762:2004 Fruit and vegetable products. Determination of mineral impurities content (idt ISO 762:2003)
LST EN 12127-1999 Textiles - Fabrics - Determination of mass per unit area using small samples
LST EN ISO 16665:2005 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna (ISO 16665:2005)
LST 1437-2006 Bread and bakery products - Receiving - Preparation of samples, determination of organoleptic characteristics and mass
LST ISO 605:2003 Pulses. Determination of impurities, size, foreign odours, insects, and species and variety. Test methods (idt ISO 605:1991)
LST EN ISO 5667-15:2009 Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009)

未注明发布机构, Sample peak impurity

DIN EN 1014-2:1996 Wood preservatives — Creosote and creosoted timber, Methods for sampling and analysis — Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis
BS ISO 762:2003(2010) Fruit and vegetable products — Determination of mineral impurities content
BS EN ISO 16665:2013(2014) Water quality — Guidelines for quantitative sampling and sample processing of marine soft - bottom macrofauna

Jilin Provincial Standard of the People's Republic of China, Sample peak impurity

DB22/T 1952-2013 Product quality inspection sampling sample management specification
DB22/T 1951-2013 On-site sampling management specification for product quality

RU-GOST R, Sample peak impurity

GOST 25555.3-1982 Fruit and vegetable products. Methods for determination of mineral impurites
GOST 26323-2014 Fruit and vegetable products. Determination of vegetable impurities content
GOST 10577-1978 Petroleum products. Method for the determination of mechanical impurities
GOST ISO 762-2013 Fruit and vegetable products. Determination of mineral impurities
GOST 8756.4-1970 Canned food products. Methods for determination of mineral impurities (sand)
GOST 20841.1-1975 Silicon organic products. Methods for determination of appearance and mechanical impurities
GOST R 53989-2010 Essential oil floral and herbal raw material. Methods of sampling, moisture and impurities determination
GOST 26323-1984 Products of prepared fruits and vegetables. Methods for determination of vegetable admixtures
GOST ISO 927-2014 Spices and condiments. Determination of extraneous matter and foreign matter content
GOST 26239.1-1984 Semiconductor silicon, raw materials for its production and quartz. Method of impurities determination
GOST 7194-1981 Fresh potatoes. Acceptance rules and methods of quality determination
GOST ISO 605-2013 Pulses. Determination of impurities, size, foreign, odours, insects, and species and variety. Test methods
GOST 11130-2013 Peat and products of its processing. Metods for determination of smalls content and impurittes
GOST 18321-1973 Statistical quality control. Item random sampling methods
GOST 8.315-1997 State system for enshuring the uniformity of measurements. Certified reference materials of composition and properties of substances and materials. Basic principles
GOST 8.315-1991 State system for ensuring the uniformity of measuring. Reference materials. Basic principles, ways of development, certification, approval, registration and use
GOST R 50396.0-2013 Poultry meat, edible offal and semi-prepared products from poultry meat. Sampling methods and preparing for microbiological examinations
GOST 33210-2014 Copper and complex ores and products for their processing. Methods for measurement of sulphur mass fraction
GOST ISO 11464-2015 Soil quality. Pretreatment of samples for physico-chemical analysis
GOST R ISO 11464-2011 Soil quality. Pretreatment of samples for physico-chemical analysis
GOST 19730-1974 Talc and talcomagnesite. Method of sampling and sample preparation for laboratory testing
GOST 15113.2-1977 Food concentrates. Methods for determination of impurities content and contamination of cereal reserves with pests
GOST ISO 14507-2015 Soil quality. Pretreatment of samples for determination of organic contaminants
GOST R ISO 14507-2011 Soil quality. Pretreatment of samples for determination of organic contaminants
GOST 26378.2-2015 Used petroleum products. Method for determination of mechanical impurities and contaminants
GOST ISO 1572-2013 Tea. Method for preparation of ground sample and determination of dry matter content
GOST 16493-1970 Product quality. Acceptance statistical inspection by attributes when the acceptable number of defectives in sample equals 0
GOST R ISO 18414-2008 Statistical methods. Acceptance sampling procedures by attributes. Accept-zero sampling system based on credit reserve factor for product quality
GOST 18227-1998 Sintered metal materials (excluding hardmetals). Tensile test pieces
GOST 31684-2012 Raw ethanol from food raw material. Gas-chromatographic method for determination of volatile organic admixtures

Standard Association of Australia （SAA）, Sample peak impurity

AS 1141.34:2007 Methods for sampling and testing aggregates - Organic impurities other than sugar
AS 1141.34:2018 Methods for sampling and testing aggregates, Method 34: Organic impurities other than sugar
AS 2300.4.5:1994 Methods of chemical and physical testing for the dairying industry - Dried milk and dried milk products - Determination of scorched particles and extraneous matter

Hunan Provincial Standard of the People's Republic of China, Sample peak impurity

DB43/T 274.1-2019 Geographical Indication Product Xuefeng Tangerine Part 1: Quality Requirements
DB43/T 1999-2021 Sampling specification for product quality supervision and random inspection
DB43/T 627-2011 Specifications for collection and storage of samples for quality and safety testing of livestock and poultry products

Korean Agency for Technology and Standards (KATS), Sample peak impurity

KS I ISO 23909:2009 Soil quality－Preparation of laboratory samples from large samples
KS M 9112-1996 Water quality-Sampling(Guidance on the preservation and handling of samples)
KS I ISO 23909-2009(2019) Soil quality－Preparation of laboratory samples from large samples
KS I ISO 5667-16-2009(2019) Water quality－Sampling－Part 16：Guidance on biotesting of samples
KS M 9114-1996 Water quality-Sampling(Guidance on sampling of drinking water and water used for food and beverage processing)
KS I ISO 18400-105:2021 Soil quality — Sampling — Part 105: Packaging, transport, storage and preservation of samples
KS I ISO 16665:2022 Water quality — Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
KS H ISO 605-2009(2019) Pulses－Determination of impurities, size, foreign odours,insects, and species and variety－Test methods
KS H ISO 1572-2007(2021) Tea－Preparation of ground sample of known dry matter content
KS I ISO 11464:2018 Soil quality — Pretreatment of samples for physico-chemical analysis
KS I ISO 5667-15:2007 Water quality－Sampling－Part 15：Guidance on preservation and handling of sludge and sediment samples
KS I ISO 5667-15-2007(2012) Water quality－Sampling－Part 15：Guidance on preservation and handling of sludge and sediment samples
KS I ISO 5667-15:2021 Water quality — Sampling — Part 15: Guidance on the preservation and handling of sludge and sediment samples
KS D ISO 13947:2012 Metallic powders-Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
KS D ISO 13947:2013 Metallic powders－Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
KS H ISO 605:2009 Pulses－Determination of impurities, size, foreign odours,insects, and species and variety－Test methods
KS I ISO 11464:2007 Soil quality-Pretreatment of samples for physico-chemical analysis
KS H ISO 1572:2007 Tea－Preparation of ground sample of known dry matter content
KS C IEC PAS 62596:2011 Electrotechnical products-Determination of restricted substances-Sampling procedure-Guidelines
KS H ISO 1572-2007(2012) Tea－Preparation of ground sample of known dry matter content
KS I ISO 14507-2009(2019) Soil quality－Pretreatment of samples for determination of organic contaminants
KS M ISO 18512:2018 Soil quality ― Guidance on long and short term storage of soil samples
KS K ISO 6741-3:2008 Textiles-Fibres and yarns-Determination of commercial mass of consignments-Part 3:Specimen cleaning procedures
KS K ISO 6741-3:2014 Textiles — Fibres and yarns — Determination of commercial mass of consignments — Part 3: Specimen cleaning procedures
KS B ISO 12308-2002(2012) Plain bearings－Quality assurance－Sample types－Definitions, applications and testing

Professional Standard - Commodity Inspection, Sample peak impurity

SN/T 2081-2008 Determination of impurities in alumina.Inductively coupled plasma atomic emission spectrometric method (ICP-AES) with microwave dissolution
SN/T 3025-2011 Wood preservatives.Creosote,creosoted timber and wooden product.Methods of sampling and analysis.Determination of the benzo[a] pyrene content of creosote
SN/T 2828-2011 Gas chromatography-mass spectrometry for the dissolution determination of creosote from cork, a wooden material used in food contact materials for export
SN/T 2698-2010 Elemental analysis of impurities in tungsten products.Inductively coupled plasma atomic emission spectrometric method
SN/T 3702.5-2013 Quality conformity evaluation of textiles for import and export.Sampling method.Part 5: Textile products
SN/T 3051-2011 Food contact materials for export. Paper,regenerated fiber materials. Determination of cresol. Gas chromatography-mass spectrometry method
SN/T 4302-2015 Rapid detection method of tris-(aziridyl)phosphine oxide in textiles by gas chromatography-mass spectrometry

Professional Standard - Agriculture, Sample peak impurity

2413药典二部-2010 Appendix XXIX F Guiding Principles for Drug Impurity Analysis
GB 12294-1990 Determination of Mineral Impurity Content in Fruit and Vegetable Products
LS/T 15211-2015 Wheat Storage Quality Tasting Score Reference Sample
335药典四部-2020 9000 Guiding Principles 9102 Guiding Principles for Drug Impurity Analysis
318药典四部-2015 9000 Guiding Principles 9102 Guiding Principles for Drug Impurity Analysis
225药典第三增补本-2010 Appendix XIX F of the Revised Appendices of Part II Guidelines for the Analysis of Drug Impurities
水产品质量安全检验手册 1.3.1.7-2005 Chapter 1 General Introduction Section 3 Sample Treatment 1. Sample pretreatment method (7) Organic matter destruction method
农业部公告第2079号 Announcement on the results of sampling and testing the fiber quality of the main cotton varieties
NY/T 1880-2010 Densified biofuel-Methods for sample preparation

Guizhou Provincial Standard of the People's Republic of China, Sample peak impurity

DB52/T 465-2004 High-quality Rapeseed Variety in Guizhou Province-Miscellaneous No.1 Hybrid Rapeseed Seed Production Technical Regulations

IN-BIS, Sample peak impurity

IS 6092 Pt.6-1985
IS 13816-1993 Fruit and vegetable products. Determination of mineral impurities content
IS 11520-1985
IS 13852-1994 Tea - preparation of ground sample of known dry matter content

CU-NC, Sample peak impurity

NC 33-27-1984 0i1 and 0i1 Derivativos. Determinacion of Mechanical Impurltlea by Filtration
NC 92-09-2-1984 Quality Control. Methods for Selecting Random Samples
NC 92-32-1981 Quality Control. Chemical Products General Rules for Sampling

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sample peak impurity

GB/T 12294-1990 Fruit and vegetable products--Determination of mineral impurities
GB 5413.30-2010 National food safety standard Determination of impurities in milk and milk products
GB/T 12999-1991 Water quality sampling--Technical regulation of the preservation and handling of samples
GB 12999-1991 Technical regulations on storage and management of water quality sampling samples
GB/T 2007.3-1987 General rules for the sampling and sample preparation of minerals in bulk--Experimental method for evaluation of quality variation
GB 2007.3-1987 General rules for sampling and sample preparation of bulk mineral products to assess quality fluctuation test method
GB/T 511-1988 Petroleum products and additives--Determination of mechanical impurities--Gravimetric method
GB/T 511-2010 Petroleum,petroleum products and additives.Method for determination of machanical admixtures
GB/T 15000.5-2023 Reference sample working instructions part 5: Internal development of quality control samples
GB/T 31197-2014 Inorganic chemicals for industrial use.Determination of impurity anions.Ion chromatography method
GB 29919-2013 Safety code for inspection of hazardous properties for miscellaneous dangerous substance and articles
GB/T 28730-2012 Method for preparation of solid biofuels sample
GB/T 6884-1986 Hardmetal products-Sampling and testing
GB/T 30903-2014 Inorganic chemicals for industrial use.Determination of impurity element.Inductively coupled plasma mass spectrometry(ICP-MS)
GB/T 14162-1993 Sampling procedures and tables for product quality audit(Apply to inspection by attributes for nonconformities per hundued units)
GB/T 14437-1997 Single sampling procedures and tables by attributes for product quality audit
GB/Z 23153-2008 Disassembly requirements for testing hazardous substances in lighting equipment
GB/T 16306-1996 Procedures and the plan of sampling for repeat test or inspection in product quality audit
GB/T 15482-1995 Single sampling procedures and tables for product quality audit of small population by attributes
GB/T 18340.6-2001 Organic geochemical measurements of geological samples--Method for hydrocarbon types analysis of gasoline by mass spectrometry
GB/T 29882-2013 Testing method for classification of hazardous materials.Partition coefficient of 1-octanol/water
GB/T 29881-2013 Test method for classification of hazardous materials.Hydrobiology toxicity test
GB/T 42363-2023 Soil Quality Pretreatment of Soil Physical and Chemical Analysis Samples
GB/T 41689-2022 Soil quality—Direct extraction of soil DNA
GB/T 14900-1994 Single sampling procedures and tables for product quality audit by variableg for mean value
GB/T 18340.1-2001 Organic geochemical measurements of geological samples--Method for the analysis of light mass crude oils by gas chromatography
GB/Z 20288-2006 General disassembly requirements for testing hazardous substances in electrical and electronic products
GB/T 32722-2016 Soil Quality Guidelines for long-term and short-term storage of soil samples
GB/T 28863-2012 Sampling inspection procedures for commodity applying to the case with prior information of quality
GB/T 730-2008 Textiles.Tests for colour fastness.Quanlity control of blue wool reference materials 1to 7
GB/T 18340.2-2001 Organic geochemical measurements of geological samples--Method for the analysis of the organic matters for stable carbon isotopic composition
GB/T 18570.6-2005 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 6:Extraction of soluble contaminants for analysis.The Bresle method
GB/T 18570.6-2011 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 6:Extraction of soluble contaminants for analysis.The Bresle method
GB/T 30902-2014 Inorganic chemicals for industrial use.Determination of impurity element.Inductively coupled plasma optical emission spectrometry (ICP-OES)
GB/T 18340.4-2001 Organic geochemical measurements of geological samples--Method for aromatic types analysis of gas-oils aromatic fractios by mass spectrometry

检验方法与规程专业（理化）, Sample peak impurity

GB 5413.30-2016 National food safety standard Determination of impurities in milk and dairy products

GOSTR, Sample peak impurity

GOST 34213-2017 Essential oil floral-herbal raw material. Methods of sampling, determining the moisture, impurities and essential oil
PNST 305-2018 Rolling stock working on liquefied natural gas. Methods for taking samples and analyzing the content of oils and impurities in the used liquefied natural gas

FI-SFS, Sample peak impurity

Shaanxi Provincial Standard of the People's Republic of China, Sample peak impurity

DB61/T 1430-2021 Product Quality Inspection Sampling Procedures

IX-SA, Sample peak impurity

AS 1141.34:1997

PT-IPQ, Sample peak impurity

NP 1423-1987
NP EN 12127-1999 Textiles Fabrics. Determination of mass per unit área using small samples

CZ-CSN, Sample peak impurity

CSN 65 6219-1962 Determination of mechanical impurities in petroleum products by filtratíon ahrazuje CSN 65 6219 z ledna 1953
CSN 65 6080-1983 Petroleum, petroleum products and additives. Determination of mechanical impurities by filtration
CSN 56 0246 Cast.8-1984 Testing methods for canned semi-finished products and products of fruit and vegetable. Determination of plant impurities content
CSN 56 0246 Cast.12-1982 Methods of testing for canned semi-finished products and products of fruit and vegetables. Determination of mineral impurities
CSN 05 1022-1986 Welding. Classiíication of consumables for welding from the viewpoint of aerosols geueiation. Sampling of aeroaols
CSN ISO 2859-3:1993 Sampling procedures for inspection by attributes. Part 3: Skip-lot sampling procedures
CSN ISO 2859-2:1992 Sampling procedures for inspectio by attributes. Part 2: Sampling plans indexed by limited quality (LQ) for isolated lot inspection
CSN ISO 2859-1:1991 Sampling procedures for inspection by attributes Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
CSN 56 0246 Cast.12 Z1-1997
CSN ISO 4519:1994 Electrodeposited metallic coatings and related finishes. Sampling procedures for inspection by attributes

Gansu Provincial Standard of the People's Republic of China, Sample peak impurity

DB62/T 1279-2005 Technical specifications for nuisance-free food quality hybrid queen bee cultivation

SG-SPRING SG, Sample peak impurity

SS 11 Pt.7-1986 Methods Of Sampling And Test For Oils And Fats Part 7 : Determination Of Insoluble Impurities Content

Professional Standard - Geology, Sample peak impurity

DZ/T 0184-1997 Isotopic geological sample analysis method
DZ/T 0130.16-2006 Geology and Mineral Resources Laboratory Testing Quality Management Regulations Part 16: Storage of Laboratory Samples and Secondary Samples
DZ 0042-1992 Regulations on product drawings and technical documents of geological instruments
DZ/Z 3-1981 Regulations on drawings and technical documents of geological machinery products
DZ/T 0042.4-1992 Geological Instrument Product Drawings and Technical Documents Preservation Method
DZ/Z 5-1981 General rules for the preparation of product drawings and technical documents of geological instruments
DZ/T 0042.1-1992 General rules for the preparation of product drawings and technical documents of geological instruments
DZ/T 0042.3-1992 Method for modifying product drawings and technical documents of geological instruments
DZ/Z 7-1981 Method for modifying product drawings and technical documents of geological instruments
DZ/Z 8-1981 Geological Instrument Product Drawings and Technical Documents Preservation Method
DZ/T 0130.14-2006 Geological and Mineral Laboratory Testing Quality Management Specification Part 14: Petroleum Geological Sample Testing
DZ/T 0130.15-2006 Geological and Mineral Laboratory Testing Quality Management Practices Part 15: Testing of Marine Geological Samples
DZ/T 0184.1-1997 General rules and general provisions of isotope geological sample analysis methods
DZ/T 0042.2-1992 Requirements and formats for drawings and technical documents of geological instruments
DZ/Z 6-1981 Requirements and formats for drawings and technical documents of geological instruments
DZ/T 0130.8-2006 Geological and Mineral Laboratory Testing Good Practice Part 8: Isotope Geological Sample Analysis
DZ/T 0138-1994 Standardization review of geological instrument product drawings and design documents

农业农村部, Sample peak impurity

NY/T 3492-2019 Agricultural biomass feedstock sample preparation
NY/T 3904-2021 Detection of heterocyclic amines in meat and meat products by liquid chromatography-tandem mass spectrometry

ES-UNE, Sample peak impurity

UNE-CEN/TS 17733:2022 Soil improvers and growing media - Sampling and sample preparation (Endorsed by Asociación Española de Normalización in May of 2022.)
UNE-EN 13615:2001/AC:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry (Endorsed by AENOR in February of 2003.)

Japanese Industrial Standards Committee (JISC), Sample peak impurity

JIS K 0410-3-3:2000 Water quality -- Sampling -- Part 3: Guidance on the preservation and handling of samples

AT-ON, Sample peak impurity

ONORM M 6259-1994 Water analysis — Preservation and handling of samples
ONR CEN/TS 17733-2021 Soil improvers and growing media - Sampling and sample preparation (FprCEN/TS 17733:2021)

ZA-SANS, Sample peak impurity

SANS 6299:2006 Lime tests - Physical properties - Sample preparation
SANS 12308:2005 Plain bearings - Quality assurance - Sample types - Definitions, applications and testing
SANS 5667-15:1999 Water quality - Sampling Part 15: Guidance on preservation and handling of sludge and sediment samples

Yunnan Provincial Standard of the People's Republic of China, Sample peak impurity

DB53/T 438-2012 Jade Jewelry Quality Grade Evaluation Standard Sample
DB53/T 664.1-2015 Analytical methods for sugarcane quality - Part 1: Sample collection and processing

Taiwan Provincial Standard of the People's Republic of China, Sample peak impurity

CNS 8624-2004 Method of test for fruit and vegetable products－Determination of mineral impurities

Group Standards of the People's Republic of China, Sample peak impurity

T/WZZC 26.3-2021 Wuzhong Morning Tea Product Quality Requirements Part 3: Instant Haggis
T/QGCML 1501-2023 Agricultural product quality and safety sampling and storage device
T/SDAS 460-2022 Product quality supervision and spot check sampling work specification
T/NAIA 036-2021 Sampling specification for quality and safety supervision of edible agricultural products
T/CAGIS 11-2023 Sampling method for quality inspection and acceptance of geographic information data products
T/GXAS 015-2018 Analysis method of sugarcane quality part 1: collection and processing of samples
T/GDAQI 020-2022 Technical service specification for sampling inspection of product quality supervision
T/SXHK 003-2019 Quality inspection requirements for product design models and 3D drawings
T/DYZL 029-2022 Dongying refined oil quality traceability management platform enterprises sampling and sample retention standards
T/DYZL 029-2023 Dongying refined oil quality traceability management platform enterprises sampling and sample retention standards

National Health Commission of the People's Republic of China, Sample peak impurity

GB 5009.243-2016 Determination of heterocyclic amines in high-temperature cooking food according to national food safety standards

YU-JUS, Sample peak impurity

JUS F.S3.072-1989 Testing of texiles. Determination of vegetable matter content and other alkali-insoluble impurities in scoured wool
JUS C.X5.025-1990 Magnetic materlals. Preparation of specimens for the checking of quality and testing of magnetic properties

国家能源局, Sample peak impurity

SY/T 6439-2017 Petroleum Geology Laboratory Sample Management Specifications
SY/T 7436-2019 Separation and detection method of neutral nitrogen compounds in petroleum geological samples

Shandong Provincial Standard of the People's Republic of China, Sample peak impurity

DB37/T 3870-2020 Technical regulations for sample preparation for agricultural product quality and safety monitoring
DB37/T 3869-2020 Technical regulations for preservation of agricultural product quality and safety monitoring samples
DB37/T 4572-2022 Technical Specifications for Quality and Safety Monitoring and Sampling of Livestock and Poultry Products
DB37/T 3489-2019 Technical specification for quality and safety monitoring and sampling of agricultural products in Shandong Province

Xinjiang Provincial Standard of the People's Republic of China, Sample peak impurity

DB6523/T 354-2023 Technical regulations for preservation of agricultural product quality and safety monitoring samples
DB6523/T 352-2023 Technical regulations for sample preparation for agricultural product quality and safety monitoring
DB65/ 302-2000 Single sampling procedures and tables by attributes for product quality audit
DB65/T 302-2000 One-time sampling inspection procedure and sampling plan for product quality supervision and counting
DB6523/T 353-2023 Agricultural product quality and safety monitoring and sampling technical specifications

Professional Standard - Chemical Industry, Sample peak impurity

HG/T 3696.2-2002 Inorganic chemical products Preparations of standard solutions for chemical analysis

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Sample peak impurity

GB/T 35925-2018 Determination of impurity fluorine ion in water soluble chemicals—Ion chromatography method
GB/T 35814-2018 Method for analysis of forestry biomass—Preparation of samples
GB/T 34053.2-2017 Specifications of quality inspection for printed paper products—Part 2: Sampling and judging rules

NZ-SNZ, Sample peak impurity

AS/NZS 5667.1:1998 Water Quality - Sampling Part 1: Guidance on the Design of Sampling Programs, Sampling Techniques and the Preservation and Handling of Samples
AS/NZS 5667.5:1998 Water Quality - Sampling Part 5: Guidance on Sampling of Drinking Water and Water Used for Food and Beverage Processing

KR-KS, Sample peak impurity

KS I ISO 16665-2015 Water quality — Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
KS I ISO 16665-2022 Water quality — Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
KS I ISO 18400-105-2021 Soil quality — Sampling — Part 105: Packaging, transport, storage and preservation of samples
KS I ISO 11464-2018 Soil quality — Pretreatment of samples for physico-chemical analysis
KS I ISO 5667-15-2021 Water quality — Sampling — Part 15: Guidance on the preservation and handling of sludge and sediment samples
KS M ISO 18512-2018 Soil quality ― Guidance on long and short term storage of soil samples
KS C IEC PAS 62596-2011 Electrotechnical products－Determination of restricted substances－Sampling procedure－Guidelines
KS K ISO 6741-2-2014 Textiles — Fibres and yarns — Determination of commercial mass of consignments — Part 2: Methods for obtaining laboratory samples

Indonesia Standards, Sample peak impurity

SNI 06-4592-1998 Guidance on sampling of drinking water and water for food processing

UY-UNIT, Sample peak impurity

UNIT 408-1975

Professional Standard - Environmental Protection, Sample peak impurity

HJ 493-2009 Water quality.Technical regulation of the preservation and handling of samples

Professional Standard - Electron, Sample peak impurity

SJ/T 11692-2017 Guideline of sample disjointment for testing certain restricted substances in electrical and electronic products

Hebei Provincial Standard of the People's Republic of China, Sample peak impurity

DB13/T 5139-2019 Standards for sampling and management of livestock product quality and safety monitoring samples

Professional Standard - Medicine, Sample peak impurity

YY/T 0188.3-1995 Operating methods for the tests and assays of drugsPart 3:Methods for the tests of impurities in pharmaceutical chemicals

Sichuan Provincial Standard of the People's Republic of China, Sample peak impurity

DB51/T 1782-2014 Determination of Niobium and Tantalum in Geological Samples by Inductively Coupled Plasma Mass Spectrometry
DB5106/T 25-2023 Implementation rules for on-site sampling of industrial product quality supervision and random inspection

Professional Standard - Petroleum, Sample peak impurity

SY/T 6439-2000 Management and preservation regulation of petroleum geology laboratory sample

国家文物局, Sample peak impurity

WW/T 0043-2012 Methods for processing bone samples for carbon dating

IT-UNI, Sample peak impurity

UNI 5063 P-1962
UNI 6631-1970 Chemical analysis of manganese ores. Sampling of ore loaded on freight wagons.

Guangxi Provincial Standard of the People's Republic of China, Sample peak impurity

DB45/T 2206.1-2020 Analytical methods for sugarcane quality - Part 1: Sample collection and pretreatment
DB45/T 524-2008 Technical specification for water quality sampling in production areas of pollution-free agricultural products in aquaculture

NL-NEN, Sample peak impurity

NEN-ISO 4489:1993 Sintered hardmetals. Sampling and testing (ISO 4489:1978)

Professional Standard - Ocean, Sample peak impurity

HY/T 229-2018 Structure confirmation method of marine bioactive material of certified reference material

CEN - European Committee for Standardization, Sample peak impurity

PD CEN/TR 16220:2011 Construction products - Assessment of release of dangerous substances - Complement to sampling

Malaysia Standards, Sample peak impurity

MS 1513 Pt.2 SUB Pt.8-2002

American National Standards Institute （ANSI), Sample peak impurity

ANSI/INCITS/ISO/IEC 29794-1:2010 Information technology - Biometric sample quality - Part 1: Framework

IEC - International Electrotechnical Commission, Sample peak impurity

PAS 62596-2009 Electrotechnical products – Determination of restricted substances – Sampling procedure – Guidelines (Edition 1.0)

NO-SN, Sample peak impurity

NS 4857-1981 Air quality - Work place atmosphere - Method for sedimentation of dust samples

US-CFR-file, Sample peak impurity

CFR 21-1307.22-2014 Food and drugs. Part1307:Miscellaneous. Section1307.22:Delivery of surrendered and forfeited controlled substances.

PH-BPS, Sample peak impurity

PNS ISO 12308:2021 Plain bearings - Quality assurance of sample types - Definitions, applications and testing

SE-SIS, Sample peak impurity

SIS 11 01 78-1964 Sampling for hardness test of powder metallurgica! products except cemented carbides