ZH
RU
ES
The detection principle of the indirect method
The detection principle of the indirect method, Total:69 items.
In the international standard classification, The detection principle of the indirect method involves: Biology. Botany. Zoology, Microbiology, Non-destructive testing, Analytical chemistry, Ferrous metals, Radiation measurements, Products of the textile industry, Paints and varnishes, Integrated circuits. Microelectronics, Fuels, Nuclear energy engineering, Textile fibres, Air quality, Veterinary medicine, Construction materials, Transport, Lifting equipment, Open systems interconnection (OSI), Networking, Products of the chemical industry, Water quality, Measurement of volume, mass, density, viscosity, Petroleum products in general.
Japanese Industrial Standards Committee (JISC), The detection principle of the indirect method
- JIS K 3810-2:2003 Mycoplasma detection methods -- Part 2: Indirect DNA staining assay
- JIS K 3810-2 AMD 1:2006 Mycoplasma detection methods -- Part 2: Indirect DNA staining assay (Amendment 1)
- JIS G 1257-2:2013 Iron and steel.Atomic absorption spectrometric method.Part 2: Determination of phosphorus.Flame atomization indirect method after extraction of molybdophosphate
Danish Standards Foundation, The detection principle of the indirect method
Korean Agency for Technology and Standards (KATS), The detection principle of the indirect method
- KS B ISO 3059:2001 Non-destructive testing-Methods for indirect assessment of black light sources
- KS B ISO 3059:2016 Non-destructive testing－Methods for indirect assessment of black light sources
- KS A ISO 11929:2014 Determination of the characteristic limits(decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation — Fundamentals and application
- KS A ISO 11929-3:2002 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 3:Fundamentals and application to counting measurements by high resolution gamma spectrometry without the influence of sample treatment
- KS A ISO 11929-3:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 3:Fundamentals and application to counting measurements by high resolution gamma spectrometry without the influence of sample treatment
- KS A ISO 11929-5:2008 Determination of the detection limit and decision threshold for ionizing radiation measurements-Part 5:Fundamentals and applications to counting measurements on filters during accumulation of radioactive material
- KS A ISO 11929-5:2014 Determination of the detection limit and decision threshold for ionizing radiation measurements－Part 5：Fundamentals and applications to counting measurements on filters during accumulation of radioactive material
- KS I ISO 8760:2008 Work-place air－Determination of mass concentration of carbon monoxide－Method using detector tubes for short-term sampling with direct indication
- KS I ISO 8761:2008 Work-place air－Determination of mass concentration of nitrogen dioxide－Method using detector tubes for short-term sampling with direct indication
YU-JUS, The detection principle of the indirect method
- JUS C.A7.082-1979 Non-destructive testing. Methodfor indirect assessment ofbhck tight sources
TR-TSE, The detection principle of the indirect method
- TS 2391-1976 Non - destructive testing - Method for indirect assessment of black light sources
International Organization for Standardization (ISO), The detection principle of the indirect method
- ISO 22290:2020 Non-destructive testing - Infrared thermographic testing - General principles for thermoelastic stress measuring method
- ISO/CD TR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
- ISO/DTR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
- ISO 8761:1989 Work-place air; determination of mass concentration of nitrogen dioxide; method using detector tubes for short-term sampling with direct indication
- ISO 11929-4:2022 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Gui
- ISO 11929-4:2020 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Gui
- ISO/IEC 8802-3:1996 Information technology - Telecommunication and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer
German Institute for Standardization, The detection principle of the indirect method
- DIN 10115:2020 Fundamentals for detection and determination of microorganisms in foodstuffs with impedance-method
- DIN 51797-4:1981 Testing of liquid fuels; determination of the sodium content; direct determination by atomic absorption spectroscopy
- DIN 25457-1:2012 Activity measurement methods for the clearance of radioactive substances and nuclear facility components - Part 1: Fundamentals
- DIN 54200:1974 Testing of textiles; quantitative analysis of fibre mixtures by means of solvent method, basis and field of application
- DIN 38404-6:1984-05 German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of the oxidation reduction (redox) potential (C 6)
- DIN EN 15856:2010 Non-destructive testing - Acoustic emission - General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid; German version EN 15856:2010
- DIN 38404-6 Berichtigung 1:2018-12 German standard methods for the examination of water, waste water and sludge - Physical and physico-chemical parameters (group C) - Part 6: Determination of the oxidation reduction (redox) potential (C 6); Corrigendum 1
- DIN 25457-1 Bb.1:2013 Activity measurement methods for the clearance of radioactive substances and nuclear facility components.Part 1: Fundamentals; Supplement 1: Explanations
- DIN EN ISO 15708-2:2019 Non-destructive testing - Radiation methods for computed tomography - Part 2: Principles, equipment and samples (ISO 15708-2:2017)
- DIN 38404-6:1984 German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of the oxidation reduction (redox) potential (C 6)
- DIN SPEC 91143-2:2012-09 Modern rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
- DIN 51777-2:1974 Testing of Mineral Oil Hydrocarbons and Solvents; Determination of Water Content according to Karl Fischer; Indirect Method
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The detection principle of the indirect method
- GB/T 33208-2016 Non-destructive testing—Practice for the blades on-line monitoring based on tip-timing theory
Canadian General Standards Board （CGSB), The detection principle of the indirect method
British Standards Institution (BSI), The detection principle of the indirect method
- BS ISO 22290:2020 Non-destructive testing. Infrared thermographic testing. General principles for thermoelastic stress measuring method
- DD ISO/TS 10993-20:2006 Biological evaluation of medical devices. Principles and methods for immunotoxicology testing of medical devices
- BS ISO 11929-3:2004 Determination of the detection limit and decision threshold for ionizing radiation measurements - Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment
American Society for Testing and Materials (ASTM), The detection principle of the indirect method
- ASTM D4834-03(2021) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
- ASTM D4834-03 Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
- ASTM E1533-00 Standard Practice for Indirect Detection of Mycoplasma in Cell Culture by 4'-6-Diamidino-2-2 Phenylindole (DAPI) Staining
- ASTM E1531-00 Standard Practice for Detection of Mycoplasma Contamination of Cell Cultures by Growth on Agarose Medium
- ASTM E1531-00(2006) Standard Practice for Detection of Mycoplasma Contamination of Cell Cultures by Growth on Agarose Medium
- ASTM E1533-93 Standard Practice for Indirect Detection of Mycoplasma in Cell Culture by 4`-6-Diamidino-2-2 Phenylindole (DAPI) Staining
- ASTM E1533-00(2006) Standard Practice for Indirect Detection of Mycoplasma in Cell Culture by 4`-6-Diamidino-2-2 Phenylindole (DAPI) Staining
Professional Standard - Electron, The detection principle of the indirect method
- SJ/T 10803-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for line circuits
- SJ/T 10800-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for sense amplifiers
- SJ/T 10802-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for peripheral drivers
- SJ/T 10805-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods of voltage comparators
- SJ/T 10804-1996 Semiconductor integrated circuits used as interface circuits--General principles of measuring methods for level translator
- SJ/T 10806-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for display drivers
- SJ/T 10801-1996 Semiconductor integrated circuits used as interface circuits - General principles of measuring methods for magnetic memory drivers
Association Francaise de Normalisation, The detection principle of the indirect method
- NF EN ISO 11929-3:2021 Détermination des limites caractéristiques (seuil de décision, limite de détection et extrémités de l'intervalle élargi) pour mesurages de rayonnements ionisants - Principes fondamentaux et applications - Partie 3 : applications aux méthodes d...
- NF EN ISO 15626:2018 Essais non destructifs des assemblages soudés - Technique de diffraction des temps de vol (méthode TOFD) - Niveaux d'acceptation
- NF X43-255*NF ISO 8761:1990 Work-place air. Determination of mass concentration nitrogen dioxide. Method using detector tubes for short-term sampling with direct indication.
- NF EN ISO 11929-1:2021 Détermination des limites caractéristiques (seuil de décision, limite de détection et extrémités de l'intervalle élargi) pour mesurages de rayonnements ionisants - Principes fondamentaux et applications - Partie 1 : applications élémentaires
- NF X43-254*NF ISO 8760:1990 Work-place air. Determination of mass concentration of carbon monoxide. Method using detector tubes for short-term sampling with direct indication.
IN-BIS, The detection principle of the indirect method
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The detection principle of the indirect method
- GB/T 12843-1991 General principle of measuring methods of microprocessors and peripheral interface circuits' parameters for semiconductor integrated circuits
- GB 12843-1991 Basic principles of electrical parameter testing methods for semiconductor integrated circuit microprocessors and peripheral interface circuits
Group Standards of the People's Republic of China, The detection principle of the indirect method
- T/CVMA 91-2022 Inert carrier based indirect agglutination test of antibodies against Group D Salmonella infection
- T/HBAS 29-2021 Non-contact deflection detection method for lifting appliances based on digital image processing technology
European Committee for Standardization (CEN), The detection principle of the indirect method
- EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids
- EN 1097-2:1998 Tests for Mechanical and Physical Properties of Aggregates - Part 2: Methods for the Determination of Resistance to Fragmentation Includes amendment A1:July 2006
- EN 1097-5:1999 Test for Mechanical and Physical Properties of Aggregates - Part 5: Determination of the Water Content by Drying in a Ventilated Oven
RU-GOST R, The detection principle of the indirect method
- GOST R 56495-2015 Air transport. Safety management system of helicopter activity. Acceptable risk. Principles and methods of determination. Basic provisions
工业和信息化部, The detection principle of the indirect method
- QB/T 5406-2019 Determination of acid-soluble zinc in toothpaste and mouthwash in oral hygiene care products by atomic absorption spectrophotometry
Professional Standard - Agriculture, The detection principle of the indirect method
- 水产品质量安全检验手册 9.3.6.1-2005 Chapter IX Fishing Feed Inspection Section 3 Routine Physical and Chemical Testing Methods for Fishing Feed VI. Determination of Inorganic Arsenic in Fishing Feed (GBT 5009.11-2003) (1) Hydride Atomic Fluorescence Spectrometry