ZH
RU
ES

Thermal Analysis vs. Calorimetric Analysis

Thermal Analysis vs. Calorimetric Analysis, Total:499 items.

In the international standard classification, Thermal Analysis vs. Calorimetric Analysis involves: Analytical chemistry, Thermodynamics and temperature measurements, Education, Vocabularies, Energy and heat transfer engineering in general, Ceramics, Plastics, Farming and forestry, Rubber, Testing of metals, Protection against fire, Products of the chemical industry, Raw materials for rubber and plastics, Reinforced plastics, Petroleum products in general, Lubricants, industrial oils and related products, Test conditions and procedures in general, Textile fibres, Ferrous metals, Mechanical testing, Water quality, TESTING, Products of the textile industry, Geology. Meteorology. Hydrology, Wood, sawlogs and sawn timber, Company organization and management, Non-ferrous metals, Acoustics and acoustic measurements, Tobacco, tobacco products and related equipment, Medical equipment, Rubber and plastics products, Insulating fluids, Air quality, Elements of buildings, Protection against crime, Ferroalloys, Environmental testing, Quality, Construction materials, Coals, Pipeline components and pipelines, Pulps, Ergonomics, Paints and varnishes, Insulation, Insulating materials, Metalliferous minerals, Iron and steel products, Physics. Chemistry, Materials for the reinforcement of composites, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Extraction and processing of petroleum and natural gas, Applications of information technology, Organic chemicals, Technical product documentation, Nuclear energy engineering, Power stations in general, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Accident and disaster control, Electrical engineering in general.

German Institute for Standardization, Thermal Analysis vs. Calorimetric Analysis

DIN 51006:2005 Thermal analysis (TA) - Thermogravimetry (TG) - Principles
DIN 51006:2023-03 Thermal analysis - Thermogravimetry - Principles / Note: Date of issue 2023-01-27*Intended as replacement for DIN 51006 (2005-07).
DIN 51006:2005-07 Thermal analysis (TA) - Thermogravimetry (TG) - Principles / Note: To be replaced by DIN 51006 (2023-03) (in preparation).
DIN 51007:2019 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
DIN 51007:2019-04 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - General Principles
DIN 51007:1994 Thermal analysis; differential thermal analysis; principles
DIN 51007-1:2023-07 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles / Note: Date of issue 2023-05-26*Intended as replacement for DIN 51007 (2019-04).
DIN 51007-2:2021 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
DIN 51007-2:2021-10 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
DIN 51005:2020 Thermal analysis (TA) - Vocabulary; Text in German and English
DIN 51005:2005 Thermal analysis (TA) - Terms
DIN 51005:2019 Thermal analysis (TA) - Vocabulary; Text in German and English
DIN 51005:2022 Thermal analysis (TA) - Vocabulary; Text in German and English
DIN 51005:2022-03 Thermal analysis (TA) - Vocabulary; Text in German and English
DIN 51005:2021 Thermal analysis (TA) - Vocabulary; Text in German and English
DIN 51004:1994 Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis
DIN EN 16603-31-04:2019-07 Space engineering - Exchange of thermal analysis data; English version EN 16603-31-04:2019
DIN EN 12118:1997 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry; German version EN 12118:1997
DIN 53436-2:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
DIN 53765:1994 Testing of plastics and elastomeres; thermal analysis; DSC-method
DIN 16459:2023-08 Determination of the fiber volume content of fiber-reinforced plastics by thermogravimetric analysis (TGA)
DIN EN ISO 22007-3:2012-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012
DIN 53436-2:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
DIN 53436-4:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids
DIN 16459:2021 Determination of the fiber volume content of fiber-reinforced plastics by thermogravimetric analysis (TGA)
DIN EN ISO 23674:2022 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
DIN 53436-4:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids / Note: Applies in conjunction with DIN 53436-1 (2015-12), DIN 53436-2 (2015-12).

NATO - North Atlantic Treaty Organization, Thermal Analysis vs. Calorimetric Analysis

STANAG 4515-2015 EXPLOSIVES. THERMAL ANALYSIS USING DIFFERENTIAL THERMAL ANALYSIS (DTA). DIFFERENTIAL SCANNING CALORIMETRY (DSC)@ HEAT FLOW CALORIMETRY (HFC)@ AND THERMOGRAVIMETRIC ANALYSIS (TGA) (ED 2)

American Society for Testing and Materials (ASTM), Thermal Analysis vs. Calorimetric Analysis

ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E473-06 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-06a Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-03 Standard Terminology Relating to Thermal Analysis
ASTM E473-04 Standard Terminology Relating to Thermal Analysis
ASTM E473-99 Standard Terminology Relating to Thermal Analysis
ASTM E473-00 Standard Terminology Relating to Thermal Analysis
ASTM E473-09 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-21 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-07b Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-08 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-22d Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E1131-98 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E2161-07 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E2161-07a Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E1131-08(2014) Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E1131-03 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E473-22b Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-22a Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-22c Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-07 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-21a Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-22 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-11 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-11a Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-05 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-18 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-23a Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-23 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-23b Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E2161-13 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E1184-98 Standard Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis
ASTM E1131-20 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E3142-18a(2023) Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM D6370-23 Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM E2550-17 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E3142-18 Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM E3142-18a Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM D8474-23 Standard Test Method for Recovered Carbon Black (rCB)—Compositional Analysis by Thermogravimetry (TGA)
ASTM D6382/D6382M-99(2022) Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM D6370-99(2009) Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM D6370-99 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM E2161-23b Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM D6370-99(2019) Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM E1868-10 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E2161-23 Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM E2161-23a Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM E2161-23c Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
ASTM E472-86(1991)e1 Practice for Reporting Thermoanalytical Data
ASTM E2105-00(2010) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
ASTM E1356-98 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis
ASTM E2040-99 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-03 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2040-08(2014) Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2105-00(2005) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
ASTM E2105-00 Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
ASTM D8339-20 Standard Test Method for The Analysis of Flue Gas Desulfurization Solids by Macro Thermogravimetric Analysis
ASTM D8474-22 Standard Test Method for Recovered Carbon Black (rCB)—Compositional Analysis by Thermogravimetry (TGA)
ASTM D6382/D6382M-99(2011)e1 Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
ASTM E473-07a Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E1953-05 Standard Practice for Description of Thermal Analysis Apparatus
ASTM E1953-98 Standard Practice for Description of Thermal Analysis Apparatus
ASTM E1953-02 Standard Practice for Description of Thermal Analysis Apparatus
ASTM E473-10 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E1970-11 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM D3418-99 Standard Test Method for Transition Temperatures of Polymers By Differential Scanning Calorimetry
ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
ASTM E2105-00(2016) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
ASTM D3450-00(2010) Standard Test Method for Washability Properties of Interior Architectural Coatings
ASTM D7582-10e1 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D7582-10 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D7582-12 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM D7582-15 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM E1953-20 Standard Practice for Description of Thermal Analysis and Rheology Apparatus
ASTM E473-14 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E473-16 Standard Terminology Relating to Thermal Analysis and Rheology
ASTM E1184-02 Standard Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis
ASTM E1868-02 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E1868-04 Standard Test Method for Loss-On-Drying by Thermogravimetry
ASTM E537-98 Standard Test Method for Assessing the Thermal Stability of Chemicals By Methods of Thermal Analysis
ASTM E2161-01 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E2161-06 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E2161-06a Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E2206-02 Standard Method for Force Calibration Of Thermomechnical Analyzers
ASTM E2744-10 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM E2161-08 Standard Terminology Relating to Performance Validation in Thermal Analysis
ASTM E2744-21 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-10(2015) Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-16 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2008-04 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-06 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2402-05 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E1131-08 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM D7582-09 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM C1458-00 Standard Test Method for Nondestructive Assay of Plutonium, Tritium and ²⁴¹Am by Calorimetric Assay
ASTM C1458-09e1 Standard Test Method for Nondestructive Assay of Plutonium, Tritium and ²⁴¹Am by Calorimetric Assay
ASTM E2206-06 Standard Test Method for Force Calibration Of Thermomechnical Analyzers
ASTM E1970-00 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E1970-01 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2206-21 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E1970-23 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E1675-20 Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
ASTM E1970-16(2021) Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E1970-16 Standard Practice for Statistical Treatment of Thermoanalytical Data
ASTM E2206-11(2015) Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E1641-07 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-07(2012) Standard Test Method for Decomposition Kinetics by Thermogravimetry

PT-IPQ, Thermal Analysis vs. Calorimetric Analysis

E E 16-1971

Professional Standard - Education, Thermal Analysis vs. Calorimetric Analysis

JY/T 0589.5-2020 General Principles of Thermal Analysis Methods Part 5: Thermogravimetric-Differential Thermal Analysis and Thermogravimetric-Differential Scanning Calorimetry
JY/T 0589.2-2020 General Principles of Thermal Analysis Methods Part 2: Differential Thermal Analysis
JY/T 0589.3-2020 General Principles of Thermal Analysis Methods Part 3: Differential Scanning Calorimetry
JY/T 014-1996 General Principles of Thermal Analysis Methods
JY/T 0589.4-2020 General Principles of Thermal Analysis Methods Part 4: Thermogravimetry
JY/T 0589.1-2020 General principles of thermal analysis methods Part 1: General principles
JY/T 0565-2020 General rules for electrothermal atomic absorption spectrometry

Professional Standard - Commodity Inspection, Thermal Analysis vs. Calorimetric Analysis

SN/T 2240-2008 Accelerated storage test,thermal analysis methods for dangerous goods.Differential thermal analysis(DTA)and thermo gravimetric analysis(TGA)
SN/T 3126-2012 Determination of sulfated ash of organic materials.Thermogravimetry
SN/T 3003-2011 Plastics. Thermogravimetry (TG) of polymers. General principle

North Atlantic Treaty Organization Standards Agency, Thermal Analysis vs. Calorimetric Analysis

STANAG 4515-2002 EXPLOSIVES: THERMAL CHARACTERIZATION BY DIFFERENTIAL THERMAL ANALYSIS, DIFFERENTIAL SCANNING CALORIMETRY AND THERMOGRAVIMETRIC ANALYSIS

Professional Standard - Machinery, Thermal Analysis vs. Calorimetric Analysis

JB/T 6856-1993 Thermogravimetry-differential thermal analyzer
JB/T 6856-2017 Thermogravimetric-Differential Thermal Analyzer
JB/T 9369-1999 Differential thermal analyzer
JB/T 9369-2017 Differential Thermal Analyzer
JB/T 8280-1999 Specifications of thermomegnetic oxygen analyzers
JB/T 7948.6-1999 Methods for chemical analysis of melted welding fluxes.The pyrolytic method for determination of calcium fluoride content
JB/T 6298-1992 Test method of determining combustion characteristics of coal with thermal analyzer

National Metrological Verification Regulations of the People's Republic of China, Thermal Analysis vs. Calorimetric Analysis

JJG 1135-2017 Thermogravimetric Analyzers
JJG 663-1990 Verification Regulation of Thermal Conductivity Hydrogen Analyzer
JJG 662-1990 Verification Regulation of Thermo-Magnetic Oxygen Analyzers
JJG(地质) 1018-1990 Verification Regulations for DT-301B Thermal Analyzer
JJG(教委) 10-1992 1090B Series Thermal Analyzer Verification Regulations

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Thermal Analysis vs. Calorimetric Analysis

GB/T 6425-2008 Nomenclature for thermal analysis
GB/T 6425-1986 Nomenclature for thermal analysis
GB/T 18602-2001 Rock pyrolysis analysis
GB/T 18602-2012 Rock pyrolysis analysis
GB/T 30097-2013 Thermal analyzer for molten cast iron
GB/T 13464-1992 Thermal analysis test methods for thermal stability of materials
GB/T 13464-2008 Thermal analysis test methods for thermal stability of materials
GB/T 15814.3-1995 Reagent of fireworks and firecrackers--Thermal compatibility test--Method of DTA and DSC
GB/T 6297-2002 Standard test method for differential thermal analysis of row materials of ceramic
GB/T 27761-2011 Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers
GB/T 27762-2011 Standard test method for mass scale calibration of thermogravimetric analyzers
GB 11166-1989 Specifications of thermomagnetic oxygen analyzers
GB/T 2910.19-2009 Textiles.Quantitative chemical analysis.Part 19:Mixtures of cellulose fibres and asbestos(method by heating )
GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition-DTA-TG analysis
GB/T 19267.12-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 12:Thermoanalysis
GB/T 19267.12-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 12: Thermal analysis
GB/T 17802-2011 Thermal analysis test methods for Arrhenius kinetics constants of thermally unstable materials
GB/T 14837-1993 Rubber and rubber products.Determination of composition by thermogravimetry
GB/T 8220.6-1998 Methods for chemical analysis of bismuth--Determination of lead content--Electrothermal atomic absorption spectrometric method
GB/T 8220.12-1998 Methods for chemical analysis of bismuth--Determination of nickel content--Electrothermal atomic absorption spectrometric method
GB/T 29189-2012 Thermo gravimetric analysis(TGA) for determination of oxidation temperature and ash content of carbon nanotubes
GB/T 29174-2012 Thermal analysis test method for constant-temperature stability of materials
GB/T 8220.13-1998 Methods for chemical analysis of bismuth--Determination of silver and cadmium content--Electrothermal atomic absorption spectrometric method
GB/T 8647.2-2006 The methods for chemical analysis of nickel. Determination of aluminium content. Electrothermal atomic absorption spectrometric method
GB/T 42919.3-2023 Determination of thermal conductivity and thermal diffusivity of plastics - Part 3: Temperature wave analysis
GB/T 3260.7-2013 Methods for chemical analysis of tin.Part7:Determination of aluminium content.Electrothermal atomic absorption spectrometric method
GB/T 11606.7-1989 The method of environmental test for analytical instruments--Damp heat, cyclic
GB/T 4324.26-2012 Methods for chemical analysis of tungsten.Part 26:Determination of nitrogen content.Pulse heating inert gas fusion-thermal conductive method and the Nessler reagent spectrophotometry

Korean Agency for Technology and Standards (KATS), Thermal Analysis vs. Calorimetric Analysis

KS M 0130-2008 General rules for thermal analysis
KS M 0130-2008(2018) General rules for thermal analysis
KS L 1609-1994 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
KS D 1701-2009 Determination of trace impurities in high purity gold-Matrix extraction method by heating
KS M ISO 248-2:2014 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
KS D 2711-2008 Evaluation of carbon nanotube soots and non-carbon content-Thermogravimetric analysis
KS C 2002-1998 Test method of thermal life evaluation of plastics by thermogravimetry
KS M ISO 11359-1-2015(2020) Plastics－Thermomechanical analysis(TMA)－Part 1：General principles
KS D 1790-1993 Methods of chemical analysis for nickel chromium electric heating material
KS D 1838-2014 Methods of chemical analysis for iron chromium electric heating material
KS M ISO 11358-2006(2011) Plastics－Thermogravimetry(TG) of polymers－General principles
KS D 1701-2004 Determination of trace impurities in high purity gold－Matrix extraction method by heating
KS D 1790-2003 Method of chemical analysis for nickel chromium electric heating material
KS D 1838-2009 Methods of chemical analysis for iron chromium electric heating material
KS D 1838-2019 Methods of chemical analysis for iron chromium electric heating material
KS D 2711-2008(2018) Evaluation of carbon nanotube soots and non-carbon content－Thermogravimetric analysis
KS M ISO 11359-1:2007 Plastics-Thermomechanical analysis(TMA)-Part 1:General principles
KS M ISO 11359-1:2015 Plastics－Thermomechanical analysis(TMA)－Part 1：General principles
KS D 1790-2018 Method of chemical analysis for nickel chromium electric heating material
KS M ISO 11358-1-2017(2022) Plastics - Thermogravimetry(TG) of polymers - Part1: General principles
KS M 3706-2008(2013) Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
KS C IEC 60469-2-2013(2018) Pulse techniques and apparatus－Part 2：Pulse measurement and analysis, general considerations
KS M 3005-2002 Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS M ISO 21870:2007 Rubber compounding ingredients－Carbon black－Determination of high－temperature loss on heating by thermogravimetry
KS M 3005-2002(2022) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS M 3706-2008 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
KS M ISO 11358:2006 Plastics－Thermogravimetry(TG) of polymers－General principles
KS I ISO 6145-7-2015(2020) Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 7：Thermal mass-flow controllers
KS M ISO 11359-3:2008 Plastics－Thermomechanical analysis(TMA)－Part 3：Determination of penetration temperature
KS M ISO 11358-1:2017 Plastics - Thermogravimetry(TG) of polymers - Part1: General principles
KS M ISO 11359-3-2008(2018) Plastics－Thermomechanical analysis(TMA)－Part 3：Determination of penetration temperature
KS M 3005-2002(2017) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS M ISO 248-2-2014(2019) Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
KS A ISO 7933-2005(2021) Ergonomics of the thermal environment－Analytical determination and interpretation of heat stress using calculation of the predicted heat strain

Japanese Industrial Standards Committee (JISC), Thermal Analysis vs. Calorimetric Analysis

JIS K 0129:2005 General rules for thermal analysis
JIS R 1618:1994 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
JIS R 1618:2002 Measuring method of thermal expansion of fine ceramics by thermomechanical analysis
JIS K 0129:1994 General rules for thermal analysis
JIS K 7120:1987 Testing methods of plastics by thermogravimetry
JIS H 1411:1996 Methods of chemical analysis for iron chromium electric heating material
JIS H 1412:1996 Methods of chemical analysis for nickel chromium electric heating material
JIS G 0320:2004 Standard test methods for heat analysis of steel products
JIS G 0320:2009 Standard test method for heat analysis of steel products
JIS K 7197:1991 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis

KR-KS, Thermal Analysis vs. Calorimetric Analysis

KS M 0130-2008(2023) General rules for thermal analysis
KS D 2711-2008(2023) Evaluation of carbon nanotube soots and non-carbon content－Thermogravimetric analysis
KS C 2002-1998(2023) Test method of thermal life evaluation of plastics by thermogravimetry

工业和信息化部/国家能源局, Thermal Analysis vs. Calorimetric Analysis

JB/T 7405-2017 Thermogravimetric Analyzer

Association Francaise de Normalisation, Thermal Analysis vs. Calorimetric Analysis

NF EN ISO 11357-4:2021 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 4 : détermination de la capacité thermique massique
NF EN 16603-31-04:2019 Ingénierie spatiale - Échange des données d'analyse thermique
NF T01-021:1974 Thermal analysis . Vocabulary. Reporting data.
NF EN 17119:2018 Essais non destructifs - Analyse thermographique - Thermographie active
NF P03-310:2007 Thermal analysis and energy balances for new housing - Quality and service associated with the conducting of thermal analyses and energy balances for appartment buildings and private houses
NF A06-340:1987 Chemical analysis of steel and cast iron. Determination of total silicium content. Gravimetric method.
NF T70-538:2003 Energetic materials for defense - Safety, vulnerability - Compatibility by thermo-gravimetric analysis
NF L90-300-31-04*NF EN 16603-31-04:2019 Space engineering - Exchange of thermal analysis data
NF EN 17501:2022 Essais non destructifs - Analyse thermographique - Thermographie active avec excitation laser
NF EN ISO 11357-3:2018 Plastiques - Analyse calorimétrique différentielle (DSC) - Partie 3 : détermination de la température et de l'enthalpie de fusion et de cristallisation
NF P85-701:2003 Jointing products - Identification tests - Thermal gravimetric analysis.
NF P85-701:2022 Produits pour joints - Essais d'identification - Analyse thermogravimétrique
NF EN ISO 23674:2022 Cosmétiques - Méthodes d'analyse - Dosage direct des traces de mercure dans les cosmétiques par décomposition thermique et spectrométrie d'absorption atomique (analyseur de mercure)
NF T51-506:2011 Plastics - Thermosetting resins - Analysis by liquid chromatography (HPLC)
NF L17-451:1988 Aéronautique et espace - Préimprégnés de résine thermodurcissable - Analyse thermique différentielle - Méthode d'essai.
NF EN ISO 22007-3:2012 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 3 : méthode par analyse de l'oscillation de la température
NF T54-935*NF EN 12118:1997 Plastics piping systems. Determination of moisture content in thermoplastics by coulometry.
NF X35-204:1997 Hot environments. Analytical determination and interpretation of thermal stress using calculation of required sweat rate.
NF T46-047:1986 VULCANIZED OR NON-VULCANIZED RUBBER. DETERMINATION OF THE CENTESIMALE COMPOSITION OF MIXTURES THROUGH THERMOGRAVIMETRY.
NF T51-226-1:2014 Plastics - Thermogravimetry (TG) of polymers - Part 1 : general principles
NF T45-135*NF ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry.
NF EN ISO 1833-26:2020 Textiles - Analyse chimique quantitative - Partie 26 : mélanges de fibres de mélamine avec certaines autres fibres (méthode à l'acide formique chaud)
NF X70-100-1:2006 Essais de comportement au feu - Analyse des effluents gazeux - Partie 1 : méthodes d'analyses des gaz provenant de la dégradation thermique
NF T51-227-3*NF EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3 : temperature wave analysis method
NF EN 16900:2018 Huiles de pyrolyse rapide pour application chaudières - Spécifications et méthodes d'analyses
NF EN ISO 11358-1:2022 Plastiques - Thermogravimétrie (TG) des polymères - Partie 1 : principes généraux

(U.S.) Ford Automotive Standards, Thermal Analysis vs. Calorimetric Analysis

FORD FLTM BZ 154-01-2002 THREMOGRAVIMETRIC ANALYSIS (TGA) OF GASOLINE GUMS
FORD FLTM BZ 154-1-2002 THREMOGRAVIMETRIC ANALYSIS (TGA) OF GASOLINE GUMS
FORD FLTM EU-AZ 053-01-2001 PYROLYTIC GAS CHROMATOGRAPHIC ANALYSIS OF FRICTION MATERIALS
FORD FLTM EU-AZ 053-1-2001 PYROLYTIC GAS CHROMATOGRAPHIC ANALYSIS OF FRICTION MATERIALS

American Society of Mechanical Engineers (ASME), Thermal Analysis vs. Calorimetric Analysis

ASME STP-PT-079-2016 Local Heating of Piping: Thermal Analysis

国家能源局, Thermal Analysis vs. Calorimetric Analysis

SY/T 7661-2022 Pyrolysis analysis method of oil content in mud shale
NB/T 20462-2017 Thermal Analysis of Dry Storage Facility for Pressurized Water Reactor Spent Fuel
SY/T 7361-2017 Quadrupole mass spectrometry for rare gas separation and component content analysis

中国石油天然气总公司, Thermal Analysis vs. Calorimetric Analysis

SY/T 6015-1994 Oil and gas display analyzer rock pyrolysis analysis method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Thermal Analysis vs. Calorimetric Analysis

ASHRAE 4323-2000 Comparison of Binary Mixture Heat and Mass Transfer Analysis with Single-Component Heat and Mass Transfer Analysis in the Design of GAX Absorber/Desorber
ASHRAE AT-01-9-4-2001 Thermoeconomic Analysis of Absorption Heat Transformers
ASHRAE AN-04-8-1-2004 A Bin Method Energy Analysis for Ground-Coupled Heat Pumps (RP-1217)
ASHRAE 3858-1995 Duct Leakage Measurement and Analysis
ASHRAE AN-04-6-3-2004 Calorimetric Analysis of the Solar and Thermal Performance of Windows with Interior Louvered Blinds
ASHRAE 4712-2004 Performance Analysis of Low-pressure Household Water Heaters
ASHRAE 4068-1997 Sensitivity Analysis for Building Thermal Loads
ASHRAE DA-00-12-1-2000 Simplified Analysis of Building Thermal Storage Effects
ASHRAE SF-98-31-3-1998 New Hot Water Consumption Analysis and Water-Heating System Sizing Methodology
ASHRAE SE-99-21-1999 Symposium on Geothermal Heat Pump Systems in Commercial Buildings: Analytical Studies
ASHRAE ST-16-017-2016 Performance Analysis of a Ground-Source Heat Pump System Using Mine Water as Heat Sink and Source
ASHRAE 4252-1999 Heat Transfer Analysis of Air-to-Carbon Dioxide Two-Phase Heat Absorption and Supercritical Heat Rejection
ASHRAE LV-11-C001-2011 New Analytical and Numerical Solutions for the Short-term Analysis of Vertical Ground Heat Exchangers
ASHRAE CI-01-4-1-2001 Three-Dimensional Thermal-Hydraulic Analysis in Convex Louver Finned_Tube Heat Exchangers
ASHRAE AC-02-15-3-2002 Ground Thermal Conductivity Testing - Controlled Site Analysis
ASHRAE LV-11-C026-2011 Rate of Heating Analysis of Data Centers during Power Shutdown
ASHRAE 3896-1995 Analysis of Deep Basement Heat Loss by Measurements and Calculations
ASHRAE QC-06-059-2006 Performance Analysis of Standing Column Well Ground Geat Exchanger Systems
ASHRAE SF-98-4-5-1998 Statistical Analysis of Unsolicited Thermal Sensation Complaints in Commercial Buildings
ASHRAE PH-97-5-6-1997 Analysis of Coupled Heat and Moisture Transfer in Buildings Considering the Influence of Radiant Heat Transfer
ASHRAE BN-97-2-3-1997 Application and Installation Quality Analysis of Residential Heat Pump Equipment in Alabama
ASHRAE MN-00-5-3-2000 Comparative Analysis of Life-Cycle Costs of Geothermal Heat Pumps and Three Conventional HVAC Systems
ASHRAE 4302-1999 Measurement of Frost Characteristics on Heat Exchanger Fins Part II: Data and Analysis (RP-824)
ASHRAE 4388-2000 Economic Analysis of Foundation Heat Gain for Refrigerated Warehouses (RP-953)
ASHRAE DA-07-058-2007 Impact of Solar Models on Building Energy Analysis for Tropical Sites ((RP-1309))
ASHRAE 4733-2004 Simulation and Performance Analysis of Lithium Bromide/Water for Absorption Heat Transformer Cycle Systems
ASHRAE 3848-1995 Analysis of the Effect of Induced Groundwater Flow on Heat Transfer from a Vertical Open-Hole Concentric-Tube Thermal Well
ASHRAE 4364-2000 Development of an In-Situ System and Analysis Procedure for Measuring Ground Thermal Properties
ASHRAE AT-01-9-1-2001 Thermoeconomic Analysis of Absorption Systems for Cooling
ASHRAE 4630-2003 Performance Analysis of Axial Fans in Residential Heat Pump Systems
ASHRAE 4669-2004 Thermal Analysis of Solar-Powered Continuous Adsorption Air-Conditioning System
ASHRAE AT-01-10-4-2001 A Simplified Analysis of Radiant Heat Loss Through Projecting Fenestration Products
ASHRAE AT-01-9-2001 Thermoeconcmics and Second Law Analysis of HVAC&R Systems
ASHRAE 3823-1994 Unsteady-State Thermal Analysis of a Large Space with Vertical Temperature Distribution

CZ-CSN, Thermal Analysis vs. Calorimetric Analysis

CSN 72 1083-1972 Thermic analysis of ceramic raw materials
CSN 70 0646 Cast.2-1978 Chemical analysis of glass. Determination of fluoride. Volumefric method (after separation by pyrohydrolysis)

Professional Standard - Agriculture, Thermal Analysis vs. Calorimetric Analysis

JJG(教委) 014-1996 Calibration Regulations for Thermal Analyzers
2347药典二部-2010 APPENDIX VIII Q THERMAL ANALYSIS
99药典四部-2015 0600 Determination of physical constants 0661 Thermal analysis
80药典四部-2020 0600 Determination of physical constants 0661 Thermal analysis

Professional Standard - Petroleum, Thermal Analysis vs. Calorimetric Analysis

SY/T 5117-1996 Rock pyrolysis analysis method
SY/T 6188-1996 Gas Chromatographic Analysis Method of Rock Pyrolysis
SY/T 6188-2016 Gas Chromatographic Analysis Method of Rock Pyrolysis

农业农村部, Thermal Analysis vs. Calorimetric Analysis

NY/T 3497-2019 Industrial Analysis of Agricultural Biomass Raw Materials by Thermogravimetric Analysis
NY/T 3495-2019 General principles of thermogravimetric analysis of agricultural biomass raw materials
NY/T 3496-2019 Kinetic parameters of thermal cracking of agricultural biomass raw materials using thermogravimetric analysis

International Organization for Standardization (ISO), Thermal Analysis vs. Calorimetric Analysis

ISO 247-2:2018 Rubber - Determination of ash - Part 2: Thermogravimetric analysis (TGA)
ISO 7111:1987 Plastics; Thermogravimetry of polymers; Temperature scanning method
ISO/CD 16094-3 Water quality — Analysis of plastics in water — Part 3: Thermo-analytical methods for waters with low content of natural suspended solids
ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
ISO/CD 22207:1980 Kraft lignin - Determination of thermal stability by Thermogravimetry
ISO/DIS 22207:2023 Kraft lignin — Determination of thermal stability by Thermogravimetry
ISO 11359-1:1999 Plastics - Thermomechanical analysis (TMA) - Part 1: General principles
ISO 11359-1:2023 Plastics — Thermomechanical analysis (TMA) — Part 1: General principles
ISO 11359-1:2014 Plastics - Thermomechanical analysis (TMA) - Part 1: General principles
ISO 11358-1:2022 Plastics — Thermogravimetry (TG) of polymers — Part 1: General principles
ISO 23674:2022 Cosmetics — Analytical methods — Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
ISO 1833-26:2020 Textiles — Quantitative chemical analysis — Part 26: Mixtures of melamine and cotton or aramide fibres (method using hot formic acid)
ISO 248-2:2012 Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry
ISO/FDIS 7933 Ergonomics of the thermal environment — Analytical determination and interpretation of heat stress using calculation of the predicted heat strain
ISO 22007-3:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method
ISO/TS 11308:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using thermogravimetric analysis
ISO/TS 23690:2023 Nanotechnologies — Multiwall carbon nanotubes — Determination of carbon impurity content by thermogravimetric analysis
ISO 11359-3:2002 Plastics - Thermomechanical analysis (TMA) - Part 3: Determination of penetration temperature
ISO 11359-3:2019 Plastics — Thermomechanical analysis (TMA) — Part 3: Determination of penetration temperature
ISO 248-2:2019 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit

Professional Standard - Military and Civilian Products, Thermal Analysis vs. Calorimetric Analysis

WJ 2292-1995 Verification Regulations for Thermogravimetric Analyzer
WJ 2291-1995 Calibration Regulations for Thermomechanical Analyzers

ES-UNE, Thermal Analysis vs. Calorimetric Analysis

UNE-CEN/TR 17603-31-17:2022 Space engineering - Thermal analysis handbook (Endorsed by Asociación Española de Normalización in February of 2022.)
UNE-EN 16603-31-04:2019 Space engineering - Exchange of thermal analysis data (Endorsed by Asociación Española de Normalización in April of 2019.)
UNE-ISO 247-2:2022 Rubber. Determination of ash. Part 2. Termogravimetric análisis (TGA)
UNE-EN ISO 23674:2023 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
UNE-EN ISO 11358-1:2022 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2022)

British Standards Institution (BSI), Thermal Analysis vs. Calorimetric Analysis

PD CEN/TR 17603-31-17:2022 Space engineering. Thermal analysis handbook
BS ISO 247-2:2018 Rubber. Determination of ash. Thermogravimetric analysis (TGA)
PD ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
BS EN ISO 1833-19:2011 Textiles. Quantitative chemical analysis. Mixtures of cellulose fibres and asbestos (method by heating)
BS EN ISO 1833-19:2010 Textiles. Quantitative chemical analysis. Mixtures of cellulose fibres and asbestos (method by heating)
BS EN 16603-31-04:2019 Space engineering. Exchange of thermal analysis data
BS PD ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
BS EN ISO 22007-3:2012 Plastics. Determination of thermal conductivity and thermal diffusivity. Temperature wave analysis method
BS 5666-2:1981 Methods of analysis of wood preservatives and treated timber. Qualitative analysis
BS 5666-2:1980 Methods of analysis of wood preservatives and treated timber - Qualitative analysis
BS EN ISO 23674:2022 Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser)
BS ISO 11359-1:2014 Plastics. Thermomechanical analysis (TMA). General principles
BS 6200-3.26.1:1995 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Determination of silicon - Steel and iron: gravimetric method
BS EN ISO 1833-26:2020 Textiles. Quantitative chemical analysis. Mixtures of melamine with certain other fibres (method using hot formic acid)
BS DD ISO/TS 11308:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using thermogravimetric analysis
BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
BS ISO 21870:2005 Rubber compounding ingredients - Carbon black - Determination of high-temperature loss on heating by thermogravimetry
BS 1728-6:1955 Methods for the analysis of aluminium and aluminium alloys - Determination of iron (volumetric: titanous chloride method)
BS ISO 11359-3:2002 Plastics - Thermomechanical analysis (TMA) - Determination of penetration temperature
BS EN ISO 11358-1:2022 Plastics. Thermogravimetry (TG) of polymers - General principles
21/30387777 DC BS EN ISO 23674. Cosmetics. Analytical methods. Direct determination of traces of mercury in cosmetics by thermal decomposition. Atomic absorption spectrometry (mercury analyzer)
BS ISO 22821:2021 Carbon-fibre-reinforced composites. Determination of fibre weight content by thermogravimetry (TG)
BS ISO 6145-7:2009 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Thermal mass-flow controllers
PD ISO/TS 23690:2023 Nanotechnologies. Multiwall carbon nanotubes. Determination of carbon impurity content by thermogravimetric analysis
BS EN ISO 11358-1:2014 Plastics. Thermogravimetry (TG) of polymers. General principles
BS EN ISO 11358:1997 Plastics - Thermogravimetry (TG) of polymers - General principles
BS ISO 11359-1:2023 Tracked Changes. Plastics. Thermomechanical analysis (TMA). General principles

RU-GOST R, Thermal Analysis vs. Calorimetric Analysis

GOST R 57988-2017 Polymer composites. Thermogravimetric analysis coupled with analysis by infrared spectroscopy (TGA/IR)
GOST R 56721-2015 Plastics. Thermogravimetry of polymers. Part 1. General principles
GOST R ISO 1833-19-2008 Textiles. Quantitative chemical analysis. Part 19. Textiles. Quantitative chemical analysis Mixtures of cellulose fibres and asbestos (method by heating)
GOST R 56722-2015 Plastics. Thermogravimetry of polymers. Part 2. Determination of activation energy
GOST 32334-2013 Lubricating oils. Determination of evaporation loss of by thermogravimetric analyzer (TGA) Noack method
GOST 32618.1-2014 Plastics. Thermomechanical analysis (TMA). Part 1. General principles
GOST R 8.722-2010 State system for ensuring the uniformity of measurements. Conductometric liquid analyses. Verification procedure
GOST R 55596-2013 District heating systems. Standard for the stress and seismic analysis
GOST R 51148-1998 Medical devices. Requirements for samples and documentation presented for toxicological tests, sanitary and chemical analyses, tests for sterility and pyrogenicity
GOST 24018.0-1990 Nickel-based fire-resistant alloys. General requirements for methods of analysis
GOST R ISO 7730-2009 Ergonomics of the thermal environment. Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria

Professional Standard - Aviation, Thermal Analysis vs. Calorimetric Analysis

HB 5297.23-2001 Determination of Hydrogen Content by Pulse Heating-thermal Conductivity Method for Chemical Analysis of Titanium Alloy
HB 5220.50-2008 Methods for chemical analysis of superalloys. Part 50: Determination of hydrogen content by impulse heating-thermal conductivity method
HB 5297.24-2001 Determination of Oxygen and Nitrogen Content by Pulse Heating Infrared Thermal Conductivity Method for Chemical Analysis of Titanium Alloy
HB 5220.49-2008 Methods for chemical analysis of superalloys. Part 49: Determination of oxygen, nitrogen content by impulse heating-infrared, thermal conductivity method
HB 5297.14-1984 Determination of Carbon Content in Titanium and Titanium Alloys High Frequency Heating - Coulomb Analysis
HB 5297.16-1984 Determination of Oxygen in Titanium and Titanium Alloys Pulse Heating - Coulomb Analysis
HB 7064.5-1994 Metal heat treatment salt bath chemical analysis method for the determination of chloride ion content by argentometric method

Professional Standard - Energy, Thermal Analysis vs. Calorimetric Analysis

NB/SH/T 0859-2013 Standard test method for the thermal stability of chemicals by thermal analysis
NB/SH/T 0867-2013 Standard test method for determination of soot in diesel engine oils by thermal gravimetric analyzer
NB/T 11157-2023 Geothermal Fluid Chemical and Isotopic Analysis Test Specifications

IT-UNI, Thermal Analysis vs. Calorimetric Analysis

UNI 4353-1959

国家质量监督检验检疫总局, Thermal Analysis vs. Calorimetric Analysis

SN/T 3078.2-2015 Determination of thermal stability of chemicals Part 2: Thermogravimetric analysis

Society of Automotive Engineers (SAE), Thermal Analysis vs. Calorimetric Analysis

SAE J409-1995 Product Analysis Permissible Variations from Specified chemical analysis of a Heat or Cast of Steel
SAE AMS2248-1960 CHEMICAL CHECK ANALYSIS LIMITS Wrought Heat and Corrosion Resistant Steels

Taiwan Provincial Standard of the People's Republic of China, Thermal Analysis vs. Calorimetric Analysis

CNS 14145-1998 Methods of test for measuring thermal expansion of fine ceramics by thermomechanical analysis

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Thermal Analysis vs. Calorimetric Analysis

JEDEC JESD28-1-2001 N-Channel MOSFET Hot Carrier Data Analysis

CEN - European Committee for Standardization, Thermal Analysis vs. Calorimetric Analysis

EN 16603-31-04:2019 Space engineering - Exchange of thermal analysis data

Henan Provincial Standard of the People's Republic of China, Thermal Analysis vs. Calorimetric Analysis

DB4105/T 213-2023 12345 government affairs hotline data analysis specification

VN-TCVN, Thermal Analysis vs. Calorimetric Analysis

TCVN 5465-19-2009 Textiles.Quantitative chemical analysis.Part 19: Mixtures of cellulose fibres and asbestos (method by heating)

AENOR, Thermal Analysis vs. Calorimetric Analysis

UNE-ISO 248-2:2013 Rubber, raw — Determination of volatilematter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit

PL-PKN, Thermal Analysis vs. Calorimetric Analysis

PN C89431-1993 Plastics. Thermogravimetry of polymers. Temperature scanning method

Danish Standards Foundation, Thermal Analysis vs. Calorimetric Analysis

DS/ISO/TS 21397:2021 FTIR analysis of fire effluents in cone calorimeter tests
DS/INSTA 216:1990 Plastics pipes. Thermoanalytic test methods for the determination on oxidation stability
DS/ISO 1833-26:2020 Textiles – Quantitative chemical analysis – Part 26: Mixtures of melamine with certain other fibres (method using hot formic acid)
DS/EN ISO 11358:1997 Plastics - Thermogravimetry (TTG) of polymers - General principles
DS/EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method

Professional Standard - Meteorology, Thermal Analysis vs. Calorimetric Analysis

QX/T 70-2007 Determination of elemental carbon and organic carbon of atmospheric aerosols.thermal/optical analysis method

Association of German Mechanical Engineers, Thermal Analysis vs. Calorimetric Analysis

VDI 3822 Blatt 1.4-2011 Failure analysis - Failures caused by thermal loading

Indonesia Standards, Thermal Analysis vs. Calorimetric Analysis

SNI 19-1654-1989 Weighted sound pressure level (weighted A), Measurement and analysis method

CN-STDBOOK, Thermal Analysis vs. Calorimetric Analysis

图书 A-4619 Material quality inspection and analysis technology
图书 3-9158 Macro-quality analysis and monitoring of entry-exit goods

Professional Standard - Tobacco, Thermal Analysis vs. Calorimetric Analysis

YC/T 592-2021 Evaluation of quality stability of different batches of cigarette paper—Thermogravimetric analysis

Professional Standard - Medicine, Thermal Analysis vs. Calorimetric Analysis

YY/T 0641-2008 Standard Test Method for Transformation Temperature Of nickel.Titanium Alloys by Thermal analysis

Fujian Provincial Standard of the People's Republic of China, Thermal Analysis vs. Calorimetric Analysis

DB35/T 1558-2016 Determination of carbon black content in polyolefin products by thermogravimetric analysis (TGA)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Thermal Analysis vs. Calorimetric Analysis

GB/T 4498.2-2017 Rubber—Determination of ash—Part 2: Thermogravimetric analysis
GB/T 18049-2017 Ergonomics of the thermal environment—Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
GB/T 2910.26-2017 Textiles—Qualitative chemical analysis—Part 26：Mixtures of melamine and cotton or aramide fibers（method using hot formic acid）
GB/T 33304-2016 Testing method of combustion characteristics of coal—Thermogravimetric analysis
GB/T 15076.13-2017 Methods for chemical analysis of tantalum and niobium—Part 13: Determination of nitrogen content—Inert gas fusion thermal conductivity method

国家市场监督管理总局、中国国家标准化管理委员会, Thermal Analysis vs. Calorimetric Analysis

GB/T 20975.30-2019 Methods for chemical analysis of aluminium and aluminium alloys—Part 30：Determination of hydrogen content—Heating extraction-thermal conductivity method
GB/T 36800.1-2018 Plastics—Thermomechanical analysis(TMA)—Part 1:General principles
GB/T 1819.1-2022 Methods for chemical analysis of tin concentrates—Part 1：Determination of moisture content—Heat drying method
GB/T 38397-2019 Coal tar—Determination of component content—Gas chromatography-mass spectrometry and thermogravimetry
GB/T 36402-2018 Thermal analysis-mass spectrometry coupling method for ceramics materials

Professional Standard - Non-ferrous Metal, Thermal Analysis vs. Calorimetric Analysis

YS/T 574.8-2009 Methods for chemical analysis of zirconium powder for electro-vacuum uses.Determination of hydrogen content-inert gas impulse fusion heat conductivity method
YS/T 536.6-2006 Bismuth Chemical Analysis Method Electrothermal Atomic Absorption Spectrometry Determination of Lead
YS/T 536.12-2006 Bismuth Chemical Analysis Method Electrothermal Atomic Absorption Spectrometry Determination of Nickel Content
YS/T 536.2-2009 Methods for chemical analysis of bismuth.Determination of iron content.Electrothermal atomic absorption spectrometric method
YS/T 536.6-2009 Methods for chemical analysis of bismuth.Determination of lead content.Electrothermal atomic absorption spectrometric method
YS/T 536.12-2009 Methods for chemical analysis of bismuth.Determination of nickel content.Electrothermal atomic absorption spectrometric method
YS/T 536.13-2009 Methods for chemical analysis of bismuth.Determination of cadmium content.Electrothermal atomic absorption spectrometric method
YS/T 536.13-2006 Bismuth Chemical Analysis Method Electrothermal Atomic Absorption Spectrometry Determination of Silver and Cadmium
YS/T 74.3-2010 Methods for chemical analysis of cadmium- Part 3: Determination of nickel content- Electrothermal atomic absorption spectrometric method

American National Standards Institute （ANSI), Thermal Analysis vs. Calorimetric Analysis

ANSI/IEEE 101:1995 Guide for the Statistical Analysis of Thermal Life Test Data
ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
ANSI/ASTM D3418:1999 Test Method for Transition Temperatures of Polymers by Thermal Analysis
ANSI/ASTM E1675:1995 Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
ANSI/ASTM D3417:1999 Test Method for Heats of Fusion and Crystallization of Polymers by Thermal Analysis

SAE - SAE International, Thermal Analysis vs. Calorimetric Analysis

SAE PT-178-2016 Aircraft Thermal Management: Integrated Energy Systems Analysis

Standard Association of Australia （SAA）, Thermal Analysis vs. Calorimetric Analysis

AS 1038.5:1998 Coal and coke - Analysis and testing - Gross calorific value
AS 3515.1:2005 Gold and gold bearing alloys - Determination of gold content (less than 30%) - Gravimetric (fire assay) method

Hunan Provincial Standard of the People's Republic of China, Thermal Analysis vs. Calorimetric Analysis

DB43/T 2452-2022 General technical requirements for heat loss rate analyzer

Professional Standard - Petrochemical Industry, Thermal Analysis vs. Calorimetric Analysis

SH/T 0632-1996 Aircraft Turbine Engine Lubricant Specific Heat Determination (Thermal Analysis Method)

Group Standards of the People's Republic of China, Thermal Analysis vs. Calorimetric Analysis

T/CEC 271-2019 Determination of main component content of composite insulator silicone rubber by thermogravimetric analysis
T/GDAQI 55-2021 Guangdong Provincial science and technology hot data analysis application specification
T/CSTM 00253-2020 Test method of thermal analysis coupled with mass spectrometry for phenolic resin
T/CCSAS 001-2018 Guidelines for Quality Control and Review for HAZOP Studies
T/ZNL 001-2021 The detection method for anti-thermal aging performance of electric vehicle charging cable Thermogravimetric analysis
T/CCFA 00004-2015 Quantitative analysis of PPS/PTFE-Differential scanning calorimetry (DSC)

Military Standard of the People's Republic of China-General Armament Department, Thermal Analysis vs. Calorimetric Analysis

GJB 772.202-1989 Explosives test methods Explosives compatibility test Differential thermal analysis and differential scanning calorimetry
GJB 737.14-1995 Test Methods for Pyrotechnic Agents Compatibility Test Differential Thermal Analysis and Differential Scanning Calorimetry
GJB 8683.11-2015 Test methods for physical parameters of pyrotechnics Part 11: Determination of spontaneous ignition temperature Differential thermal analysis and differential scanning calorimetry

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Thermal Analysis vs. Calorimetric Analysis

GJB 5891.17-2006 Test method of loading material for initiating explosive device Part 17: Compatibility test Method of DTA and DSC
GJB 5382.11-2005 Test methods of physical parameter for pyrotechnic. Part 11: Determination of Autoignition temperature. DTA and DSC method

Institute of Electrical and Electronics Engineers (IEEE), Thermal Analysis vs. Calorimetric Analysis

IEEE 101-1987 Guide for the Statistical Analysis of Thermal Life Test Data
IEEE/ANSI 101-1987 IEEE Guide for the Statistical Analysis of Thermal Life Test Data
ANSI/IEEE Std 101-1987(R2010) IEEE Guide for the Statistical Analysis of Thermal Life Test Data

Canadian General Standards Board （CGSB), Thermal Analysis vs. Calorimetric Analysis

CGSB 149-GP-2MP-1986 Manual for Thermographic Analysis of Building Enclosures

GB-REG, Thermal Analysis vs. Calorimetric Analysis

REG NASA-LLIS-0695-2000 Lessons Learned - Guidelines for Thermal Analysis of Spacecraft Hardware
REG NASA-LLIS-0794-2000 Lessons Learned ?Thermal Analysis of Electronic Assemblies to the Piece Part Level

海关总署, Thermal Analysis vs. Calorimetric Analysis

SN/T 5268-2019 Determination of raw rubber content of natural rubber composite rubber by thermogravimetric analysis
SN/T 5269-2019 Determination of Raw Rubber Content of Neoprene Composite Rubber by Thermogravimetric Analysis

European Committee for Standardization (CEN), Thermal Analysis vs. Calorimetric Analysis

EN 12118:1997 Plastics piping systems - Determination of moisture content in thermoplastics by coulometry
EN ISO 23674:2022 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022)
EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
prEN ISO 23674:2021 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition - Atomic absorption spectrometry (mercury analyzer) (ISO/DIS 23674:2021)

Professional Standard - Textile, Thermal Analysis vs. Calorimetric Analysis

FZ/T 01160-2022 Quantitative analysis of textile polyphenylene sulfide fiber and polytetrafluoroethylene fiber mixture Differential scanning calorimetry (DSC)

Malaysia Standards, Thermal Analysis vs. Calorimetric Analysis

MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Thermal Analysis vs. Calorimetric Analysis

ASHRAE 4763-2005 Integrated Thermal and Daylighting Analysis for Design of Office Buildings

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Thermal Analysis vs. Calorimetric Analysis

IEEE 101-1972 GUIDE FOR THE STATISTICAL ANALYSIS OF THERMAL LIFE TEST DATA (R 1982)

Professional Standard - Public Safety Standards, Thermal Analysis vs. Calorimetric Analysis

GA/T 76-1994 Test method for thermal analysis of the constant temperature stability of substances

ESDU - Engineering Sciences Data Unit, Thermal Analysis vs. Calorimetric Analysis

ESDU 70023 A-1982 The measurement and analysis of climb and excess power performance.

European Association of Aerospace Industries, Thermal Analysis vs. Calorimetric Analysis

AECMA PREN 6064-1995 Aerospace Series Non-Metallic Materials Analysis of Non-Metallic Materials (Cured) for the Determination of the Extent of Cure by Differential Scanning Calorimetry (DSC) Edition P1

Professional Standard - Electricity, Thermal Analysis vs. Calorimetric Analysis

DL/T 818-2002 Technical guide for carbide phase analysis of low alloy heat resistant steels

AGMA - American Gear Manufacturers Association, Thermal Analysis vs. Calorimetric Analysis

95FTM7-1995 Experimental and Analytical Assessment of the Thermal Behavior of Spiral Bevel Gears
99FTMS1-1999 Modeling and Measurement of Sliding Friction for Gear Analysis

US-FCR, Thermal Analysis vs. Calorimetric Analysis

FCR COE SL-89-6 FINAL REPORT-1989 THERMAL STRESS ANALYSIS OF LOCK WALL, DASHIELDS LOCKS, OHIO RIVER

AT-ON, Thermal Analysis vs. Calorimetric Analysis

OENORM EN ISO 23674:2021 Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition - Atomic absorption spectrometry (mercury analyzer) (ISO/DIS 23674:2021)

United States Navy, Thermal Analysis vs. Calorimetric Analysis

NAVY MIL-E-7016 F (1)-1981 ELECTRIC LOAD AND POWER SOURCE CAPACITY, AIRCRAFT, ANALYSIS OF
NAVY MIL-E-7016 F-1976 ELECTRIC LOAD AND POWER SOURCE CAPACITY, AIRCRAFT, ANALYSIS OF