ZH
RU
ES

Elastomer performance test

Elastomer performance test, Total:499 items.

In the international standard classification, Elastomer performance test involves: Plastics, Coals, Springs, Rubber, Fluid power systems, Aircraft and space vehicles in general, Adhesives, Power stations in general, Protection against crime, Road vehicle systems, Products of the textile industry, Elements of buildings, Rubber and plastics products, Protection against dangerous goods, Inks. Printing inks, Footwear, Materials for aerospace construction, Medical equipment, Ceramics, Environmental protection, Clothes, Lubricants, industrial oils and related products, Cellular materials, Protection of and in buildings, Office machines, Seals, glands, Shafts and couplings, Products of the chemical industry, Medical sciences and health care facilities in general, Laboratory medicine, Non-destructive testing, Construction materials, Construction industry, Analytical chemistry, Road engineering, Standardization. General rules, Installations in buildings, Sports equipment and facilities, Metrology and measurement in general, Solar energy engineering, Electricity. Magnetism. Electrical and magnetic measurements, Pulps, Glass, Pharmaceutics, Semiconductor devices, Environmental testing, Electrical and electronic testing, Packaging and distribution of goods in general, Hand-held tools, Radiation measurements, Fertilizers, Cork and cork products, Technical drawings, Conducting materials, Insulating fluids, Components for electrical equipment, Protection against fire, Electrical engineering in general, Diagnostic, maintenance and test equipment, Electrical wires and cables, Equipment for children, Quality, Woodworking equipment, Reinforced plastics, Raw materials for rubber and plastics, Aerospace engines and propulsion systems, Aerospace fluid systems and components, Alarm and warning systems, Electrical equipment for working in special conditions, Electronic display devices, Audio, video and audiovisual engineering, Materials for the reinforcement of composites, Geology. Meteorology. Hydrology, Machine tools, Dentistry, Agricultural machines, implements and equipment, Mechanical testing, Motor cycles and mopeds, Equipment for entertainment, Tyres, Mining equipment, Fluid storage devices, Non-textile floor coverings, Surface treatment and coating, Equipment for the chemical industry, Protective equipment, Open systems interconnection (OSI), Corrosion of metals, Cutting tools, Ventilators. Fans. Air-conditioners, Heat pumps, Explosion protection, Furniture, Rectifiers. Convertors. Stabilized power supply, Fasteners, Valves, Equipment for petroleum and natural gas industries, Railway rolling stock, Structure and structure elements, Acoustics and acoustic measurements, Wood-based panels, Safety of machinery, Electronic components in general, Magnetic materials, Testing of metals, Transport, Occupational safety. Industrial hygiene, Aids for disabled or handicapped persons, Fuel cells, Refrigerating technology, Machine tool systems, Industrial automation systems, Internal combustion engines for road vehicles.

Military Standard of the People's Republic of China-General Armament Department, Elastomer performance test

GJB 5018-2003 Inspection method for ballistic performance of stock artillery shells
GJB 3219-1998 Air-to-air missile system overall performance test method
GJB 5019-2003 Mass grade and opportunity for the interior ballistic property examination of cartridge
GJB 8699.8-2015 Aerial Bomb Test Methods Part 8: Ballistic Performance Test Flight Stability
GJB 8695.6-2015 Test methods for underwater gun performance - Part 6: Anti-corrosion properties
GJB 8695.7-2015 Test methods for underwater gun cartridge performance Part 7: Sealing performance
GJB 8670.18-2015 Special projectile effect test method Part 18: Signal projectile ballistic performance test
GJB 8699.9-2015 Aviation Bomb Test Methods Part 9: Ballistic Performance Test Aircraft Carrier Bomb (Box) Bullet Dispersion Test
GJB 8695.2-2015 Underwater gun performance test method Part 2: Underwater warhead velocity
GJB 4763-1997*GJBz 20384-1997 Basic performance test procedures for irritant anti-riot ammunition
GJB 59.17-1988 Armored Vehicle Test Procedure Armor Plate Artillery Resistance Performance Test
GJB 59.18-1988 Armored Vehicle Test Procedure Armor Plate Anti-Gunshot Performance Test
GJB 8699.11-2015 Aerial Bomb Test Methods Part 11: Ground Performance Test Crushing Sand Box Method
GJB 8695.1-2015 Test methods for underwater gun performance - Part 1: General principles
GJB 8699.7-2015 Aerial Bomb Test Methods Part 7: General Testing of Sealing Properties
GJB 8695.5-2015 Underwater gun performance test methods Part 5: Underwater penetration
GJB 8699.15-2015 Aerial Bomb Test Methods Part 15: Ground Performance Test Static Armor Breaking
GJB 8671.15-2015 Test methods for metallic cartridges Part 15: Comparative test of internal ballistic performance
GJB 452A-2021 Optical camouflage performance of camouflage clothing and its inspection method
GJB 55-1985 Testing method for fluorescence performance of cerium-doped quartz glass tubes
GJB 573.32-1990 Fuze environment and performance test method ejection take-off and interception landing test

ES-AENOR, Elastomer performance test

British Standards Institution (BSI), Elastomer performance test

BS ISO 23673:2021 Plastics. Elasticity index. Determination of elastic property of melts
BS EN 12962:2011 Adhesives. Determination of elastic behaviour of liquid adhesives (elasticity index)
20/30387774 DC BS ISO 23673. Plastics. Elasticity index. Determination of elastic property of melts
BS ISO 6194-4:2009 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Performance test procedures
BS EN ISO 10765:2010 Footwear - Test method for the characterization of elastic materials - Tensile performance
BS ISO 22762-6:2022 Elastomeric seismic-protection isolators - High-durability and high-performance specifications and test methods
BS ISO 11843-2:2000 Capability of detection. Methodology in the linear calibration case
BS ISO 22343-1:2023 Security and resilience. Vehicle security barriers - Performance requirement, vehicle impact test method and performance rating
BS EN 13068-1:2000 Non-destructive testing - Radioscopic testing - Quantitative measurement of imaging properties
22/30404322 DC BS ISO 22343-1. Security and resilience. Vehicle security barriers - Performance requirement, vehicle impact test method and performance rating
BS EN 50194-1:2009 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
BS EN 50194-2:2006+A1:2016 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
BS 5551-2.10:1993 Fertilizers. Sampling. Method of checking the performance of mechanical devices for sampling of solid fertilizer moving in bulk
BS EN ISO 15548-1:2013 Non-destructive testing. Equipment for eddy current examination. Instrument characteristics and verification
BS ISO 19922:2005 Ships and marine technology. Fire resistance of metallic pipe components with resilient and elastomeric seals. Requirements on the test bench
21/30403755 DC BS ISO 22762-6. Elastomeric seismic-protection isolators. Part 6. High-durability and high-performance specifications and test methods
BS EN ISO 8871-5:2014 Elastomeric parts for parenterals and for devices for pharmaceutical use. Functional requirements and testing

Professional Standard - Coal, Elastomer performance test

MT/T 737-1997 Specification of verification for safe use of oxygen combustion bomb
MT/T 737-2007 Specification of verification for safe use of oxygen combustion bomb

German Institute for Standardization, Elastomer performance test

DIN 9835-3:1984 Elastomer pressure springs for press tools; testing and requirements
DIN 53765:1994 Testing of plastics and elastomeres; thermal analysis; DSC-method
DIN 53523-4:1976 Testing of Rubber and Elastomers; Testing with the Mooney Shearing Disk Viscometer; Determining the Scorching Behaviour
DIN 5514-2:1980 Materials for railway vehicles; elastomers, testing
DIN 18554-1:1985 Testing of masonry; determination of compressive strenght and of elastic modulus
DIN 53529-1:1983 Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); general working principles
DIN 53835-1:1987 Testing of textiles; tensile test for testing the elastic behaviour; principles
DIN 53516:1987 Testing of rubber and elastomers; determination of abrasion resistance
DIN 53505:1987 Testing of rubber, elastomers and plastics; Shore hardness testing A and D
DIN 53513:1990-03 Determination of the viscoelastic properties of elastomers on exposure to forced vibration at non-resonant frequencies
DIN 53521:1987 Determination of the behaviour of rubber and elastomers when exposed to fluids and vapours
DIN EN 12962:2011 Adhesives - Determination of elastic behaviour of liquid adhesives (elasticity index); German version EN 12962:2011
DIN 53523-1:1992 Determination of Mooney viscosity of rubber; preparation of test pieces
DIN 53523-3:1976 Testing of Rubber and Elastomers; Testing with the Mooney Shearing Disk Viscometer; Determining the Mooney Viscosity
DIN 3761-15:1984 Rotary shaft lip type seals for automobils; test; determination of cold resistant of elastomers; differential-thermoanalysis
DIN 3761-14:1984 Rotary shaft lip type seals for automobils; test; infrared-spectroscopic analysis of elastomers
DIN 4807-3:1993 Expansion vessels; elastomer membranes; requirements and testing
DIN 54355:1977 Testing of pulp; determination of the stability of pulp against sodium hydroxide solution (alkali resistance)
DIN 53517:1987 Testing of rubber and elastomers; determination of compression set after constant strain
DIN ISO 9962-2:1993 Manually operated draughting machines; characteristics, performance, inspection and marking; identical with ISO 9962-2:1992
DIN 53529-2:1983 Testing of rubber and elastomers; measurement of vulcanization characteristics (curometry); evaluation of cross-linking isotherms in terms of reaction kinetics
DIN 44973-2:1981 Electric humidifier for household use; characteristics of performance, tests
DIN 53835-3:1981 Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant extension limits
DIN 53835-4:1981 Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant force limits
DIN 53835-2:1981 Testing of textiles; determination of the elastic behaviour of single and plied elastomeric yarns by repeated application of tensile load between constant extension limits
DIN EN 660-2:1999 Resilient floor coverings - Determination of wear resistance - Part 2: Frick-Taber test; German version EN 660-2:1999
DIN 51961:1984 Testing of plastics surfaces; behaviour on exposure to glowing cigarettes
DIN EN 61830:1998 Microwave ferrite components - Measuring methods for major properties (IEC 61830:1997); German version EN 61830:1998
DIN 53835-13:1983 Testing of textiles; determination of the elastic behaviour of textile fabrics by a single application of tensile load between constant extension limits
DIN 4102-18:1991 Fire behaviour of building materials and components; fire barriers, verification of automatic closure (continuous performance test)
DIN 53457:1987 Testing of plastics; determination of the elastic modulus by tensile, compression and bend testing
DIN EN ISO 10846-3:2003 Acoustics and vibration - Laboratory measurement of the vibro-acoustic properties of resilient elements - Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-3:2002); German version EN
DIN 52377:1978 Testing of plywood; determination of modulus of elasticity in tension and of tensile strength
DIN 52377:2016 Testing of plywood - Determination of modulus of elasticity in tension and of tensile strength
DIN EN 14136:2004 Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures; German version EN 14136:2004
DIN 5514-3:1980 Materials for railway vehicles; elastomers, functional group: permanent door and window seals, specification group
DIN 52271:1981 Testing of mineral fibre insulating materials; Behaviour at elevated temperatures
DIN 54345-1:1992-02 Testing of textiles; electrostatic behaviour; determination of electrical resistance
DIN 50050-1:1986 Testing of materials; burning behaviour of materials; small burning cabinet
DIN 53835-14:1992 Testing of textiles; tensile test for testing the elastic behaviour; knitted fabrics, single strain between two force limits

International Organization for Standardization (ISO), Elastomer performance test

ISO/DIS 5119 Low temperature sealing capability of elastomeric seals — Test methods
ISO 10765:2010 Footwear - Test method for the characterization of elastic materials - Tensile performance
ISO 11170:2003 Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics
ISO 3453:1984 Non-destructive testing; Liquid penetrant inspection; Means of verification
ISO 13226:1999 Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers
ISO 11170:2013 Hydraulic fluid power - Sequence of tests for verifying performance characteristics of filter elements
ISO 9366:1990 Composition cork floor tiles; determination and control of squareness and straightness of edges
ISO/FDIS 22343-1 Security and resilience — Vehicle security barriers — Part 1: Performance requirement, vehicle impact test method and performance rating
ISO/FDIS 5119:2023 Low temperature sealing capability of elastomeric seals — Test methods
ISO 22762-6:2022 Elastomeric seismic-protection isolators — Part 6: High-durability and high-performance specifications and test methods
ISO/TR 10451:1991 Dental implants; state of the art; survey of materials
ISO 10231:2022 Motorcycle tyres — Test methods for verifying tyre capabilities
ISO/DIS 15548-3:2006 Non-destructive testing-Equipment for eddy current examination-Part 3:System characteristics and verification
ISO 9962-2:1992 Manually operated draughting machines; part 2: characteristics, performance, inspection and marking
ISO 22232-2:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes
ISO 22232-1:2020 Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments

GM North America, Elastomer performance test

GM GM9905P-1992 Test for Wear Resistance of Elastomers
GM GM9698P-1998 Test for Cure State of Elastomers

(U.S.) Ford Automotive Standards, Elastomer performance test

FORD ESP-M99P24-A-1988 INK PERFORMANCE, ELASTOMERIC MARKING
FORD FLTM BP 156-01-2007 ELASTOMER PHYSICAL PROPERTIES RESISTANCE TO FLUIDS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD FLTM BV 161-01-2004 RVT / Elastomer Adhesion Test for T- Joints
FORD FLTM BV 109-02-2000 ELASTOMER SEALERS (TAPE-FORM) - WELDING ACCEPTANCE
FORD FLTM BO 029-03-2001 WATER IMMERSION - WARP TEST OF ELASTOMERS AND PLASTICS
FORD FLTM BO 029-3-2001 WATER IMMERSION - WARP TEST OF ELASTOMERS AND PLASTICS
FORD ESB-M99P22-A1-1993 WEATHERING PERFORMANCE, MOLDED-IN-COLOR UNPAINTED, PLASTIC/ ELASTOMERIC MATERIALS, EXTERIOR
FORD ESB-M99P22-A2-1993 WEATHERING PERFORMANCE, MOLDED-IN-COLOR UNPAINTED, RIGID PLASTIC/ELASTOMERIC MATERIALS, INTERIOR TRIM
FORD WSS-M9P8-B-2009 ELASTOMERIC PARTS, INTERIOR PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A***

U.S. Military Regulations and Norms, Elastomer performance test

ARMY MIL-PRF-32076-2000 PERFORMANCE SPECIFICATION FOR UNITIZATION OF AMMUNITION
ARMY ADS-37 A-PRF-1996 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (E3) PERFORMANCE AND VERIFICATION REQUIREMENTS

European Committee for Standardization (CEN), Elastomer performance test

EN 12962:2001 Adhesives - Determination of Elastic Behaviour of Liquid Adhesives ("Elasticity Index")
DD ENV 1363-3-1998 Fire resistance tests - Part 3: Verification of furnace performance
prEN ISO 8871-5 rev Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010)
prEN ISO 20776-2:2021 Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test - Part 2: Evaluation of performance of antimicrobial susceptibility test devi
EN 863:1995 Protective clothing - Mechanical properties - Test method: Puncture resistance
EN 14136:2004 Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures
EN ISO 22232-2:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)
EN ISO 22232-1:2020 Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 1: Instruments (ISO 22232-1:2020)

Professional Standard - Electricity, Elastomer performance test

DL/T 928-2005 The rule for the of PC bomb calorimeter performance

Professional Standard - Public Safety Standards, Elastomer performance test

GA/T 824-2019 Specifications for construction of forensic science bullet performance testing laboratory
GA/T 150-1996 Examination of cadaver died from mechanical asphyxia
GA/T 168-1997 Examination of bodies died from mechanical injuries
GA/T 0150-1996 Mechanical asphyxiation autopsy
GA/T 1709-2020 Classification and test methods of bulletproof performance of physical protection products
GA/T 168-2019 Standards for autopsy of forensic mechanical injuries
GA/T 150-2019 Standards for forensic autopsy of mechanically asphyxiated autopsies

American Gear Manufacturers Association, Elastomer performance test

AGMA 9004-B08-2008 Flexible Couplings - Mass Elastic Properties and Other Characteristics
AGMA 9104-A06-2006 Flexible Couplings - Mass Elastic Properties and Other Characteristics (Metric Edition)

American Society for Testing and Materials (ASTM), Elastomer performance test

ASTM D624-00(2012) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D2731-21 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D6436-08 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
ASTM D7121-05(2018) Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum
ASTM D6436-14(2022) Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
ASTM D2731-07 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D2731-15 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM E3004-15 Standard Specification for Preparation and Verification of Clay Blocks Used in Ballistic-Resistance Testing of Torso Body Armor
ASTM D4289-97 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D4289-19 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D4289-21 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D7121-05 Standard Test Method for Rubber Property-Resilience Using Schob Type Rebound Pendulum
ASTM D7605-11 Standard Test Method for Thermoplastic ElastomersMeasurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM C639-15 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM D926-98 Standard Test Method for Rubber Property-Plasticity and Recovery (Parallel Plate Method)
ASTM D926-17(2022) Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)
ASTM D412-06a(2013) Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomersmdash;Tension
ASTM D7605-10 Standard Test Method for Thermoplastic Elastomersx2014;Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
ASTM F3248-17 Standard Test Method for Determining Vertical Deformation and Area Deflection of Area Elastic, Point Elastic, Combined Elastic and Mixed Elastic Sport and Dance Surfaces
ASTM D2653-07(2018) Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D412-06 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
ASTM D4289-03(2008) Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D746-98e1 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D412-16e1 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D746-20 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D412-16(2021) Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D412-16 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
ASTM D4289-13 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D4289-13(2014)e1 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
ASTM D412-15 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers&x2014;Tension
ASTM D412-15a Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers&x2014;Tension
ASTM C1183-04(2008) Standard Test Method for Extrusion Rate of Elastomeric Sealants
ASTM D2653-07 Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM C1183/C1183M-13 Standard Test Method for Extrusion Rate of Elastomeric Sealants
ASTM C1216-03(2008) Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
ASTM D3107-07e1 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D3107-07(2011) Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D3107-07(2015) Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM F1470-18 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F1470-19 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F2199-02(2008) Standard Test Method for Determining Dimensional Stability of Resilient Floor Tile after Exposure to Heat
ASTM F21-65(2002) Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
ASTM F2199-20 Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
ASTM C1522-05(2021) Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
ASTM D624-00(2020) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM E1886-05 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
ASTM D3107-07 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D2632-01 Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D2632-15(2019) Standard Test Method for Rubber Property—Resilience by Vertical Rebound
ASTM D5662-19 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
ASTM D624-00(2007) Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D624-00 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

DE-VDA, Elastomer performance test

European Telecommunications Standards Institute (ETSI), Elastomer performance test

ETSI GS ENI 002-2020 Experiential Networked Intelligence (ENI); ENI requirements (V3.1.1)

Korean Agency for Technology and Standards (KATS), Elastomer performance test

KS K 0352-2010 Test method for stretch properties of stretch woven fabrics
KS P 1977-2018 Protocol for evaluation of qualitative test performance in in-vitro diagnostic medical laboratory
KS L 1598-2009(2019) Testing method for elastic modulus of high performance ceramics at elevated temperature
KS B ISO 11170:2009 Hydraulic fluid power-Filter elements-Procedure for verifying performance characteristics
KS B ISO 11170:2014 Hydraulic fluid power — Sequence of tests for verifying performance characteristics of filter elements
KS K 0352-1995 Testing method for stretch properties of stretch woven fabrics
KS M 3978-2019 Magnetorheological elastomer — Determination of dynamic magnetorheological properties by shear vibration
KS K 0352-2015 Test method for stretch properties of stretch woven fabrics
KS M ISO 5308-2006(2011) Solid fertilizers－Method of checking the performance of mechanical devices for sampling of product moving in bulk
KS M ISO 9366:2004 Agglomerated cork floor tiles－Determination of dimensions and deviation from squareness and from straightness of edges
KS M 6670-2016 Testing method for low-temperature compression set of vulcanized elastomers
KS C 6031-1983 Measuring Methods for Fundamental Properties of Soft Ferrites
KS P ISO 8871-5:2021 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
KS P ISO 8871-5-2010(2016) Elastomeric parts for parenterals and for devices for pharmaceutical use－Part 5：Functional requirements and testing
KS A 3267-2002 SIGNIFICANCE TEST OF EQUALITY OF THE TWO POPULATION VARIANCES(TWO-SIDED)
KS M 3059-2008 Test method for brittleness temperature of plastics and elastomers by impact
KS C 6598-2007(2018) Electrical apparatus for the detection of combustible gases in domestic premises－Test methods and performance requirements
KS C 6596-2007 Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS B 6390-2012 Test code for performance and accuracy of jig grinding machines
KS M ISO 10191-2012(2017) Passenger car tyres－Verifying tyre capabilities－Laboratory test methods
KS A 3264-2002 SIGNIFICANCE TEST OF EQUALITY OF THE POPULATION VARIANCE AND THE STANDARD (ONE-SIDED)
KS A 3264-1971 SIGNIFICANCE TEST OF EQUALITY OF THE POPULATION VARIANCE AND THE STANDARD (ONE-SIDED)
KS B ISO 10463-2005(2010) Cylinders for permanent gases－Inspection at time of filling
KS M 6670-1995 Testing method for low-Temperature compression set of vulcanized elastomers
KS M 3059-1993 Test method for brittleness temperature of plastics and elastomers by impact
KS M 6670-2016(2021) Testing method for low-temperature compression set of vulcanized elastomers
KS F 2847-2005 Test method of heat responsive links for fire damper
KS B ISO 5151:2012 Non-ducted air conditioners and heat pumps－ Testing and rating for performance
KS B ISO 5151-2023 Ductless Air Conditioner Inspection and Performance Specifications
KS A 3265-2002 SIGNIFICANCE TEST OF EQUALITY OF THE POPULATION VARIANCES AND THE STANDARD (TWO-SIDED)
KS C 6592-2007(2018) Performance requirements for toxic gas-Detection instruments：Hydrogen sulfide
KS B 1200-2013 Standard guide for fastener sampling for specified mechanical properties and performance inspection
KS W 0914-2004 Liquid penetrant inspection for aerospace use
KS M 6754-2014 Testing methods for polyurethane elastomeric materials of non-pneumatic tire
KS R 9241-2005(2015) Method of performance test and inspection methodsfor cast iron brake shoes of railway rolling stock
KS A ISO 9962-2:2014 Manually operated draughting machines — Part 2: Characteristics, performance, inspection and marking
KS A ISO 9962-2:2002 Manually operated draughting machines-Part 2:Characteristics, performance, inspection and marking
KS B 4420-2007 Test code for performance and accuracy of numerically controlled vertical turning lathes
KS B 4922-2013 Test code for performance and accuracy of numerically controlled car wheel lathes
KS R 1073-2014 Methods of inspection for serviceability of automotive wheel bearings
KS B 4047-2010 Test code for performance and accuracy of verticalmulti-spindle drilling machines
KS C 6592-2007 Performance requirements for toxic gas-Detection instruments：Hydrogen sulfide

Professional Standard - Machinery, Elastomer performance test

JB/T 10079-1999 Standard method of test for elastic properties of metal sheets and strips
JB/T 12244-2015 Test method for cupola performance
JB/T 11780-2014 Non-destructive testing instrument.Characterization and verification of array eddy current testing instrument
JB/T 3356.1-1999 Performance test methods for cryogenic liquid containers

CZ-CSN, Elastomer performance test

CSN 39 5108-1963 Testing of cartriges for civil fire arms. Function test and facultative caloulations
CSN 34 1382-1988 Examination of the electrostatic properties of materials and products

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Elastomer performance test

GB 19454.2-2004 Safety code for inspection of portable tanks for dangerous goods-Performance inspection
GB/T 31423-2015 Guide for performance acceptance of oxygen bomb calorimeter
GB/T 14832-2008 Test methods for compatibility between hydraulic fluids and standard elastomeric materials
GB/T 21486-2008 Hydraulic fluid power.Filter elements.Sequence of tests for verifying performance characteristics
GB/T 9870-1988 Elastomers--General requirements for dynamic testing
GB 9870-1988 Elastomers－General requirements for dynamic testing
GB/T 28607-2012 Determination of compatibility between standard elastomeric materials and automotive engine oil
GB 19434.4-2004 Safty code for the inspection of flexible IBCs for dangerous goods-Performance tests
GB/T 31544-2015 Test method for elastic properties of glass at high temperatures.Impulse excitation of vibration
GB/T 13871.4-2007 Rotary shaft lip type seals incorporating elastomeric sealing elements.Part 4:Performance test procedures
GB 19432.2-2004 Safty code for inspection of large packagings for dangerous goods-Performance tests
GB/T 21294-2014 Testing methods of physical and chemical performance of garments
GB/T 21294-2007 Testing method of the garments’intrinsic quality
GB/T 13217.5-2008 Test method for initial dryness of liquid ink
GB 19434.8-2004 Safty code for the inspection of rigid plastics IBCs for dangerous goods-Performance tests
GB/T 24210-2009 Test method for the elastis modulus of whole graphite electrodes.Velocity of sound
GB 19433.2-2004 Safty code for the inspection of packaging of dangerous goods transported by air-Performance tests
GB 19453.1-2004 Safety code for inspection of packaging of dangerous goods for calcium carbide-Performance tests
GB 19457.1-2004 Safety code for inspection of packaging of dangerous goods for paint-Performance tests
GB/T 19453.1-2004 Safety code inspection of packaging of dangerous goods for calcium carbide—Performance tests
GB/T 2567-2008 Test methods for properties of resin casting boby
GB/T 3362-1982 Test method for tensile properties of carbon fiber strands
GB/T 7897.6-1990 Test methods of mechanical properties of mortar for ferrocement--Test for static modulus of elasticity in compression
GB 19270.2-2003 Safety code for inspection of packaging of dangerous goods transported by water-Performance inspection
GB 19269.2-2003 Safety code for the inspection of packaging of dangerous goods transported by road-Performance inspection
GB 19359.2-2003 Safety code for the inspection of packaging of dangerous goods transported by rail-Performance inspection
GB 19521.8-2004 Safety code for inspection of hazardous properties for dangerous goods of toxic gases
GB/T 30594-2014 Thermal performance of double-skin glass facade.Tracer gas mehtod
GB/T 32493-2016 Test method of ballistic resistance for fibre reinforced composites.Specific absorbed energy by perforation method
GB/T 14480.3-2008 Non-destructive testing.Equipment for eddy current examination.Part 3:System characteristics and verification
GB/T 29302-2012 Non-destructive testing instruments.Characterization and verification of phased array ultrasonic examination systems
GB 19434.6-2004 Safty code for the inspection of Composite IBCs for dangerous goods-Performance tests
GB 19434.3-2004 Safty code for the inspection of wooden IBCs for dangerous goods-Performance tests
GB 19434.5-2004 Safty code for the inspection of metal IBCs for dangerous goods-Performance tests
GB/T 19434.3-2004 Safty code for the inspection of wooden IBCs for dangerous goods—Performance tests
GB/T 16822-1997 Test method for dielectric properties of dielectric crystal
GB/T 2568-1995 Test method for tensile properties of resin casting body
GB/T 2569-1995 Test method for compressive properties of resin casting body
GB/T 2570-1995 Test method for flexural properties of resin casting body
GB 18565-2001 Multiple performance requirement and detecting methods for commercial vehicles
GB 11012-1989 Inspection procedures for electrical performance test equipments for solar cells
GB/T 10430-2008 Inspection method for bonding ability of sintered friction elements
GB/T 27664.1-2011 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 1:Instruments
GB/T 27664.2-2011 Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 2:Probes

GM Daewoo, Elastomer performance test

GMKOREA EDS-T-7421-2012 Accelerated Aging Test for Elastomers ????? ???? ???? Version 5; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by ISO188 [Replaced: GMKOREA EDS-T-7421]

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Elastomer performance test

GJB 5468-2005 Test method of performance for aerial ejection seat cartridge
GJB 5496.8-2005 Test method of aerial bomb Part 8：Ballistic performance test-Flight stability
GJB 5488.6-2005 Test method of underwater cartridge　Part 6:Cartridge antirust capability
GJB 5488.7-2005 Test method of underwater cartridge　Part 7：Tcartridge airproof capability
GJB 5496.9-2005 Test method of aerial bomb Part 9：Ballistic performance test-Aerial dispenser and bomblet-Bomblet dispense test
GJB 5494.16-2005 Test method of rifle grenade Part 16:Test for duty
GJB 5488.2-2005 Test method of underwater cartridge Part 2:Underwater bullet velocity
GJB 5496.11-2005 Test method of aerial bomb Part 11:Performance test on ground-Fragmentation-Sand chamber method
GJB 5488.1-2005 Test method of underwater cartridge Part 1:General
GJB 5496.7-2005 Test method of aerial bomb Part 7:General inspection-Tightness
GJB 5488.5-2005 Test method of underwater cartridge Part 5:Underwater penetration
GJB 5489.7-2005 Test method of aircraft machine gun Part 7：Feed system performance
GJB 5496.15-2005 Test method of aerial bomb Part 15:Performance test on ground-Static penetration
GJB 5496.14-2005 Test method of aerial bomb Part 14:Performance test on ground－Explosion power

工业和信息化部, Elastomer performance test

QB/T 5344-2018 Testing method for retort resistance of liquid ink

Professional Standard - Aerospace, Elastomer performance test

QJ 2592-1994 Bullet air tightness inspection test method
QJ 990.8-1986 Coating inspection method Coating electrical insulation performance inspection method
QJ 2712.3-1995 Analysis and Evaluation of Ground-to-Surface Ballistic Missile Flight Test Results Sampling Flight Test for Batch Production
QJ 1365-1988 Code for test of vibration performance of missile railway transport vehicle line operation

Professional Standard - Light Industry, Elastomer performance test

QB/T 4558-2013 Footwear.Test method for the characterization of elastic materials.Tensile performance

Society of Automotive Engineers (SAE), Elastomer performance test

SAE AMS3217/4A-1993 Test Slabs, Fluoroelastomer (FKM) 65 - 75
SAE AMS3217A-1993 Standard Elastomer Stocks Test Slabs
SAE AMS-R-83485-1998 Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures
SAE AMS-R-83485A-2014 Rubber, Fluorocarbon Elastomer, Improved Perfrormance At Low Temperatures
SAE AMS-R-83485/1A-2015 RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES, O-RINGS, SIZES AND TOLERANCES
SAE AS5752-2009 Aerospace Visual Inspection Standard for Elastomeric Sealing Elements Other than O-Rings
SAE AMS-R-83485/1-2001 Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures, O-Rings, Sizes and Tolerances FSC 5330
SAE J2615-2005 Testing Performance of Fuel Cell Systems for Automotive Applications

Japanese Industrial Standards Committee (JISC), Elastomer performance test

JIS K 7311:1995 Testing methods for thermoplastic polyurethane elastomers
JIS B 9514:1990 Test methods for time recorders
JIS B 9514:2002 Test methods for time recorders
JIS K 7312:1996 Physical testing methods for molded products of thermosetting polyurethane elastomers
JIS K 6255:1996 Testing methods of rebound resilience for rubber, vulcanized or thermoplastic
JIS B 2709:2000 Helical torsion springs -- Requirements for design, performance test method
JIS Z 2314:1991 Test methods for performance characteristics of eddy current testing instruments
JIS B 8619:1999 Thermostatic refrigerant expansion valves -- Methods of testing for performance

Danish Standards Foundation, Elastomer performance test

DS/EN ISO 10765:2010 Footwear - Test method for the characterization of elastic materials - Tensile performance
DS/ISO 3453:1987 Non-destructive testing. Liquid penetrant inspection. Means of verification
DS/EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance

Professional Standard - Military and Civilian Products, Elastomer performance test

WJ 2144-1993 Ballistic Consistency Design and Inspection Evaluation
WJ 2626-2004 Test method for elastic properties of aviation jets
WJ 2252-1994 Verification rules for activated carbon and impregnated carbon protective performance test device

Professional Standard - Medicine, Elastomer performance test

YY/T 1419-2016 Ultrasound.Test methods of performance for quasi-static strain sonoelasticity
YY/T 0688.2-2010 Clinical laboratory testing and in vitro diagnostic test systems.Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility devices.Part 2 : Evaluation of performance of antimicrobial susceptibility test devi
YY/T 0507-2009 Medical elastic bandage Characteristics and test methods for basic performance
YY/T 0688.1-2008 Clinical laboratory testing and in vitro diagnostic test systems -Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility devices -Part 1: Reference method for testing the in vitro activity of antimicrobia

Group Standards of the People's Republic of China, Elastomer performance test

T/CPCIF 0200-2022 The norm of energy consumption per unit product of polypropylene thermoplastic elastomer
T/CNGA 36-2022 Test method for compression performance of elastic fabrics for garments on human body
T/PTSHOES 0015-2022 Test method for vertical rebound performance of insole
T/CECS 704-2020 Building overall air tightness testing and performance evaluation standards
T/CSTM 00324-2021 Styrene Butadiene Styrene(SBS) modified bituminous sheet materials for the energy efficient passive building
T/CECS 698-2020 Indoor PM2.5 detection equipment performance inspection standard
T/CIMA 0020-2020 Dynamic Performance Testing Device for AC Electric Energy Meter
T/CCTA 20202-2022 Testing method of physical and chemical properties of natural color fabric
T/CASME 856-2023 Performance inspection procedures for infant electric rocking chairs
T/NBRTT 003-2023 Halogen-free flame retardant thermoplastic elastomer sheathing material for new energy vehicle charging pile cables
T/CAME 38-2021 Performance validation of nucleic acid testing in blood screening
T/CASME 707-2023 Code for safety performance inspection of electric bicycles
T/CASME 853-2023 Toy balance scooter performance inspection regulations
T/ZQB 001-2022
T/CPSS 1004-2018 Technical specification for performance test of PV-storage integrated converter
T/CSTM 00425-2023 Non-destructive testing — Steel products — Characterization and verification of automatic eddy current flaw detector
T/CSTM 00424-2023 Non-destructive testing — Steel products—Characterization and verification of automatic infrared thermography flaw detector
T/CSTM 00426-2023 Non-destructive testing — Steel products— Characterization and verification of automatic magnetic flux leakage flaw detector
T/CEC 301-2020 Code for inspection of safety performance of conduits for power cables
T/ZPP 026-2022 Inspection rules for mechanical safety performance of electric scooters

National Metrological Verification Regulations of the People's Republic of China, Elastomer performance test

JJG(机械) 105-1992 Regulations for Verification of Fatigue Testing Machines for Elastic Components
JJG(化工) 105-1991 Verification rules for elastic testing machine for vulcanized rubber

Association Francaise de Normalisation, Elastomer performance test

NF EN ISO 10765:2010 Chaussures - Méthode d'essai de caractérisation des matériaux élastiques - Performances de traction
NF T70-713:2003 Energetic materials for defense - Performances - Ballistic performance of explosives - Symmetrical plane test.
NF L46-016:1987 Joints toriques - Élastomère éthylène-propylène 41B8 - Classe de précision A - Classe de performance 3.
NF E48-670*NF ISO 11170:2013 Hydraulic fluid power - Sequence of tests for verifying performance characteristics of filter elements
NF E48-372-4*NF ISO 6194-4:2012 Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 4 : performance test procedures.
NF T70-530:2003 Energetic materials for defense - Safety, vulnerability - 12,7 mm bullet impact test.
NF T70-530:2014 Energetic materials for defense - Safety, vulnerability - 12,7 mm bullet impact test
NF A09-490:1988 NON DESTRUCTIVE TESTING. TESTING FOR LEAK TIGHTNESS. RECOMMENDED PRACTICES FOR THE SPECIFICATION AND TESTING OF GAS-TIGHTNESS.
NF EN 1931:2000 Feuilles souples d'étanchéité - Feuilles d'étanchéité de toiture bitumineuses, plastiques et élastomères - Détermination des propriétés de transmission de la vapeur d'eau
NF A09-492:1989 Non destructive testing. Tightness testing. Method under vacuum with tracer gras.
NF Q51-001:1969 ASBESTOS BOARD. GENERAL CHARACTERISTICS AND TEST METHODS.
NF R12-755:2010 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods.
NF S92-053-2*NF EN ISO 20776-2:2022 Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 2 : evaluation of performance of antimicrobial susceptibility
NF M87-401:1985 Petroleum industry. Acceptance testing and inspection of valves. Performance under pressure.
NF T70-528:2003 Energetic materials for defense - Safety, vulnerability - 75 mm diameter gap test.
NF T70-528:2009 Energetic materials for defense - Safety, vulnerability - 75 mm diameter gap test.

Professional Standard - Commodity Inspection, Elastomer performance test

SN/T 3482.3-2013 Safety code for the inspection of packaging of infectious substances transported by air.Part 3:Performance test
SN/T 4416-2015 Import and Export Functional Textile Inspection Regulations Combustion Performance
SN/T 1730.10-2006 Safety performance test for export fireworks and firecrackers - Part 10 : Safety performance for use
SN/T 1730.10-2014 Inspection methods for safety performance of export fireworks and firecrackers Part 10: Inspection of safety performance in use
SN/T 2558.1-2010 Rules for inspection on import and export functional textiles.Part 1:Solar ultraviolet radiation protective properties
SN/T 2102.2-2008 Polymerase chain reaction(PCR)for the detection of food-borne pathogens.Part 2:Performance testing for thermal cyclers
SN 0449.2-1995 Rules for the inspection of packaging for dangerous goods exported sea.Performance test
SN/T 0371-1995 Rule for the inspection of packaging of dangerous goodsfor export by air.Performance tests
SN/T 0805.2-1999 Rules for the inspection of packaging of dangerous goods for export by rail.Performance tests
SN/T 2558.3-2012 Method for the inspection of functional textiles for import and export.Part 3:Iron-free performance
SN/T 2558.6-2013 Testing method for import and export funetional textiles.Part 6:Water-vapour transmission properties
SN/T 0753.1-1999 Rules for the inspection of performance requirements for export electric iron
SN/T 0810.2-1999 Rules for the inspection of technical performance of monitor for export
SN/T 0814-1999 Rules for the inspection of safety requirements of lift for import and export
SN/T 0819.2-1999 Rules for the inspection of technical performance of video tape recorder for export
SN/T 1095-2002 Rules for the inspection of the performance of medical endoscopes for import
SN/T 0370.2-2009 Rules for the inspection of packaging for export dangerous goods- Part 2: Performance test
SN/T 1936.2-2007 Inspection rules of large packagings for export dangerous goods.Part 2: Performance tests
SN/T 0809.2-1999 Rules for the inspection of technical performance of video-CD player for export
SN/T 2558.9-2015 Testing method for import and export functional textiles.Part 9:Antibacterial activity in textiles for import and export.Impedance method
SN/T 2558.7-2014 Testing method of import and export functional textiles.Part 7:Luminescent properties of luminous fiber
SN 0021-1992 Rules for inspection of technical performance ofradio receiver tape-recorder for export
SN/T 0895.2-2000 Rules for the inspection of performance requirements of automatic rice cookers for export
SN/T 0730.2-1997 Rules for the technical performance inspection of compact disc player for import and export

RO-ASRO, Elastomer performance test

STAS 8365/4-1975 Elastomers TEST RECIPE FOR CHLOROPRENE RUBBERS
STAS 8365/1-1976 Elastomeres TEST RECIPE FOR TESTING NATUREL RUBBER
STAS 6926/12-1970 Motor vehicles. Testing methods DETERMINATION OF BRAKING EFFICIENCY
STAS 8365/7-1982 Elastomeres TEST RECIPE FOR TESTING ETHYLENE-PROPYLENE-DIENE NON-OIL EXTENDED

IT-UNI, Elastomer performance test

Taiwan Provincial Standard of the People's Republic of China, Elastomer performance test

CNS 10523-1987 Method of Test for Total Thermal Resistance for Windows and Doors
CNS 10452-1983 Method of Test for Rust Preventive Properties of Rust Preventive Oil
CNS 10453-1983 Method of Test for Film Removing Properties of Rust Preventive Oil
CNS 10451-1983 Method of Test for Corrosive Properties of Rust Preventive Oil
CNS 11193-1985 Method of Test for Asphalt Finishers
CNS 12556-1989 Method of Test for Thermal Performance for Solar Collectors
CNS 12557-1989 Method of Test for Thermal Performance for Solar Storage Tanks
CNS 5072-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Sealing Test)
CNS 6117-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Damp Heat Test)
CNS 2690-1975 Method of Test for Mold-proof of Textile Products
CNS 8081-1981 Methods of Performance Test of Panels for Building Construction
CNS 2697-1966 Method of Test for Small Internal Combustion Engines of Land Use
CNS 5067-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Test of Soft Solders for Heat Endurance)
CNS 5068-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Solderability Testing for Adhesion)
CNS 13268-1993 Test Methods for Performance and Accuracy of Moulding Machine
CNS 3304-1971 Testing Standard for Performance of Internal Combustion Engines for Marine Use
CNS 5652-1981 Lube Oil Filter Performance Test for Automobile
CNS 13267-1993 Test Methods for Performance and Accuracy of Single Spindle Wood Borer
CNS 13194-1993 Test Methods for Performance and Accuracy of Double Sizers
CNS 13191-1993 Test Methods for Performance and Accuracy of Band Saws
CNS 13521-1995 Method of Test of Sacrificial Anodes Used for Cathodic Protection
CNS 3005-1969 Method of Test for Diesel Engine of Constant Speed
CNS 10271-1983 Method of Test for Physical Properities of Unvulcanized Rubber (General Rules)
CNS 13192-1993 Test Methods for Performance and Accuracy of Band Saw Stretchers
CNS 4233-1978 Method of Test for Mechanical and Performance Properties of Torque Type Steel Hexagon Locknuts
CNS 5541-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Continuous Operation Test of Transistor)
CNS 5543-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Intermittent Operation Test of Transistor)
CNS 10318-1983 Method of Test for Fundamental Properties of Soft Ferrites
CNS 5076-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Vibration Test)
CNS 5073-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Shock Test)
CNS 5066-1983 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (General Rules)
CNS 2316-1964 Testing Standard of Small Internal Combustion Engines for Marine Use

RU-GOST R, Elastomer performance test

GOST R ISO 10765-2017 Footwear. Test method for the characterization of elastic materials. Tensile performance
GOST 344-1985 Abrasive paper for abrasion resistance control. Specifications

HU-MSZT, Elastomer performance test

国家药监局, Elastomer performance test

YY/T 1789.5-2023 Methods for performance evaluation of in vitro diagnostic test systems Part 5: Analytical specificity
YY/T 1789.3-2022 In vitro diagnostic testing system performance evaluation methods Part 3: Detection limit and quantitation limit
YY/T 1789.1-2021 Methods for performance evaluation of in vitro diagnostic test systems Part 1: Precision
YY/T 1789.2-2021 Methods for performance evaluation of in vitro diagnostic test systems Part 2: Accuracy
YY/T 1789.4-2022 In vitro diagnostic testing system performance evaluation methods Part 4: Linear intervals and reportable intervals
YY/T 1789.6-2023 In vitro diagnostic testing system performance evaluation methods Part 6: Precision, diagnostic sensitivity and specificity of qualitative reagents
YY/T 1643-2018 Functionality and compatibility testing methods for remote medical imaging equipment

国家市场监督管理总局、中国国家标准化管理委员会, Elastomer performance test

GB/T 21486-2019 Hydraulic fluid power—Filter elements—Sequence of tests for verifying performance characteristics
GB/T 2567-2021 Test methods for properties of resin casting body

Fujian Provincial Standard of the People's Republic of China, Elastomer performance test

DB35/T 1937-2020 Test method for shock absorption and rebound performance of footwear products

Professional Standard - Textile, Elastomer performance test

FZ/T 50058-2022 Test method for elastic properties of synthetic fiber two-component composite filament

Standard Association of Australia （SAA）, Elastomer performance test

AS 1683.15.1:2000 Methods of test for elastomers - International rubber hardness

Professional Standard - Ferrous Metallurgy, Elastomer performance test

YB/T 090-1996 Test method for performance of worm reducer
YB/T 5212-1993 Test method for the elastis modulus of whole graphite electrodes -Velocity of sound

冶金工业部, Elastomer performance test

YB/T 0090-1996 Performance inspection method of worm reducer

American National Standards Institute （ANSI), Elastomer performance test

ANSI N42.15-1997 Performance Verification of Liquid-Scintillation Counting Systems

Professional Standard - Agriculture, Elastomer performance test

ZB A 87001.2-1988 Performance inspection of packaging inspection regulations for dangerous goods exported by sea
CNAS-GL039-2019 Guidelines for Performance Verification of Molecular Diagnostic Test Procedures
CNAS-GL037-2019 Guidelines for performance verification of quantitative assay procedures in clinical chemistry

YU-JUS, Elastomer performance test

JUS G.E3.017-1987 Re treaded tyres. Clasification, performance, inspection and marking

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Elastomer performance test

GB/T 35349-2017 Parking brake performance test methods for vehicles
GB/T 17993-2017 General requirements for the competence of automotive multiple-function inspection agency

Canadian General Standards Board （CGSB), Elastomer performance test

CGSB 4.2 NO. 56.1-M87-CAN/CGSB-1987 Methodes Pour Epreuves Textiles Evaluation De L'Extension Unidirectionnelle Et De La Recuperation Dimensionnelle Des Tissus Elastiques

国家食品药品监督管理局, Elastomer performance test

YY/T 1480-2016 Performance test method of ultrasonic elastography equipment based on acoustic radiation force

Guangdong Provincial Standard of the People's Republic of China, Elastomer performance test

DB44/T 1349-2014 Testing specification for high-performance soft ferrite materials
DB44/T 879-2011 Inspection regulations for explosion-proof safety performance of explosion-proof elevators
DB44/T 1847-2016 Standards for Periodic Inspection of Large Slab Girders for Power Plant Boilers and Evaluation of Safety Performance

NL-NEN, Elastomer performance test

NEN-EN 369-1993 Protective clothing. Protection against liquid chemicals. Test method: Resistance of materials to permeation by liquids

KR-KS, Elastomer performance test

KS P ISO 8871-5-2021 Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 5: Functional requirements and testing
KS C 6598-2007(2023) Electrical apparatus for the detection of combustible gases in domestic premises－Test methods and performance requirements
KS C 6592-2007(2023) Performance requirements for toxic gas-Detection instruments：Hydrogen sulfide

SE-SIS, Elastomer performance test

SIS SS IEC 575:1982 Insulators - Thermal-mechanical performance test and mechanical performance test on string insulator units

Professional Standard - Ocean, Elastomer performance test

HY/T 0279-2019 Test methods for measurement of electrical properties of high frequency ground wave radar

海关总署, Elastomer performance test

SN/T 0370.2-2021 Regulations for inspection of packaging of dangerous goods for export Part 2: Performance inspection
SN/T 5289-2022 Specifications for Inspection of Labels on Imported and Exported Functional Textiles

Shandong Provincial Standard of the People's Republic of China, Elastomer performance test

DB37/T 2802-2016 Specifications for testing and inspection of safety performance of electric locomotives in use in coal mines
DB37/T 2804-2016 Specification for inspection and inspection of safety performance of monorail cranes in use in coal mines

Professional Standard - Petroleum, Elastomer performance test

SY/T 5710-2016 Technology procedure for performance inspection of well testing tools
SY/T 5710-2002 Technology procedure for performance inspection of testing tools
SY 5710-2016 Technical regulations for performance inspection of formation testing tools

Xinjiang Provincial Standard of the People's Republic of China, Elastomer performance test

DB65/T 2082-2003 Computer Network(Ethernet) Performance Inspection Criterion

American Society of Mechanical Engineers (ASME), Elastomer performance test

ASME SEC XI D1 MA APP VIII-2003 Appendix VIII Performance Demonstration for Ultrasonic Examination Systems

能源部, Elastomer performance test

SY 5281-1991 Demulsifier performance testing method Bottle test method

国家能源局, Elastomer performance test

NB/T 10176-2019 Specifications for safety performance testing and inspection of monorail cranes in use in coal mines

ISA - International Society of Automation, Elastomer performance test

ISA 92.0.01 PART I-1998 Performance Requirements for Toxic Gas-Detection Instruments: Hydrogen Sulfide

IN-BIS, Elastomer performance test

Professional Standard - Civil Aviation, Elastomer performance test

MH/T 6093-2013 Assessment of the compatibility of gas turbine lubricants with elastomers.Gravimetric method

United States Navy, Elastomer performance test

NAVY MIL-STD-2203 A-1994 ENERGY MONITORING AND CONTROL SYSTEMS, PERFORMANCE VERIFICATION AND ENDURANCE TESTS

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Elastomer performance test

IEEE N42.15-1990 Performance Verification of Liquid-Scintillation Counting Systems

ES-UNE, Elastomer performance test

UNE 180201:2022 Formwork. General Design, performance requirements and verifications

Lithuanian Standards Office , Elastomer performance test

LST EN ISO 10768:2010 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010)

AENOR, Elastomer performance test

UNE-EN ISO 10768:2011 Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010)
UNE 36493-2:1980 ESTIMATION AND VERIFICATION OF ELASTIC VALUES AT HIGH TEMPERATURE IN STEEL PRODUCTS FOR PRESSURE VESSELS. ELASTIC LIMIT IN AUSTENITIC STEEL PRODUCTS

Occupational Health Standard of the People's Republic of China, Elastomer performance test

GBZ 207-2008 Testing criteria of personnel dosimetry performance
GBZ(卫生) 207-2016 Testing criteria of personnel dosimetry performance for external exposure

Professional Standard - Electron, Elastomer performance test

SJ/T 10862-1996 Measurement of the performance of hearing aids for quality inspection for delivery purposes
SJ/T 11061-1996 Inspection method of solar cell electrical performance testing equipment

Sichuan Provincial Standard of the People's Republic of China, Elastomer performance test

DB51/T 2321-2017 Test method for tensile properties of basalt fiber monofilament

中华人民共和国国家卫生和计划生育委员会, Elastomer performance test

GBZ 207-2016 Testing criteria of personnel dosimetry performance for external exposure