ZH
RU
ES

Pipeline Flow Meter Standards

Pipeline Flow Meter Standards, Total:467 items.

In the international standard classification, Pipeline Flow Meter Standards involves: Environmental protection, Measurement of fluid flow, Pipeline components and pipelines, Ergonomics, Installations in buildings, Shipbuilding and marine structures in general, Equipment for petroleum and natural gas industries, Measurement of force, weight and pressure, Linear and angular measurements, Petroleum, petroleum products and natural gas handling equipment, Aerospace engines and propulsion systems, Medical equipment, Measurement of time, velocity, acceleration, angular velocity, External sewage systems, Thermodynamics and temperature measurements, Metrology and measurement in general, Air quality, Organic chemicals, Power transmission and distribution networks, Applications of information technology, Powder metallurgy, Aerospace fluid systems and components, Construction materials, Burners. Boilers, Protection against fire, Quality, Protection of and in buildings, Rubber and plastics products, Road vehicles in general, Road engineering, Structures of buildings, Surface treatment and coating, Fasteners, Plastics, Measurement of volume, mass, density, viscosity, Geology. Meteorology. Hydrology, Radiation measurements, Vocabularies, Software development and system documentation, Cereals, pulses and derived products, Paints and varnishes, Industrial automation systems, Products of the textile industry, Law. Administration, Magnetic materials, Semiconductor devices, Electricity. Magnetism. Electrical and magnetic measurements, Nuclear energy engineering.

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Pipeline Flow Meter Standards

ASHRAE 41.8-1989 Standard Methods of Measurement of Flow of Liquids in Pipes Using Orifice Flowmeters
ASHRAE 4841-2006 The Effect of Elbows on the Accuracy of Liquid Flow Measurement with an Insertion Flowmeter
ASHRAE 41.10 ERTA-2021 Standard Method for Refrigerant Mass Flow Measurement Using Flowmeters
ASHRAE 41.10-2008 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Flowmeters

Group Standards of the People's Republic of China, Pipeline Flow Meter Standards

T/BAS 003-2022 Measurement of fluid flow by means of fixed value standard nozzles meter inserted in circular cross-section conduits running full
T/QPYH 0001-2019 Metrological Management Standards for Medical Institutions
T/QGCML 328-2022 Calibration procedures for flow sensors in mine gas drainage pipelines
T/CECS 98-2019 Standard for design of the long distance slurry pipeline transportation engineering
T/ZBTA 02-2023 Design standard for integrated supports and hangers of civil building pipelines
T/CSUS 20-2021 Standard for design of pipeline integration with building information modeling in urban rail transit engineering
T/XMSM 1-2023 Integrity measurement management standard group standard for aquatic products market
T/XJLSXH 1108-2023 Guideline for Standardization of quality and safety management in the whole process of Nang Industry
T/CSZX 001.9-2021 Standardization and Standardization Construction Specifications of Grass-roots Bureau of Market Supervision and Administration Bureau Part IX: Standard Metrology Supervision

American Society of Mechanical Engineers (ASME), Pipeline Flow Meter Standards

ASME MFC-6M-1998 Measurement of Fluid Flow in Pipes Using Vortex Flowmeters
ASME MFC-6-2013 Measurement of Fluid Flow in Pipes Using Vortex Flowmeters
ASME MFC-6M-1987 Measurement of fluid flow in pipes using vortex flow meters
ASME MFC-6M Errata-1987 Measurement of fluid flow in pipes using vortex flow meters; Errata
ASME MFC-16-2014(R2019) Measurement of Liquid Flow in Closed Conduits with Electromagnetic Flowmeters
ASME MFC-5.1-2011(R2018) Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
ASME MFC-5.1-2011 Measurement of Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flowmeters
ASME MFC-5.3-2013(R2018) Measurement of Liquid Flow in Closed Conduits Using Doppler Ultrasonic Flowmeters
ASME MFC-5.3-2013 Measurement of Liquid Flow in Closed Conduits Using Doppler Ultrasonic Flowmeters
ASME B31E Addenda-2010 Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems
ASME B31E-2008 Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems
ASME B31EA-2010 Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems (Addenda to ASME B31E-2008)

British Standards Institution (BSI), Pipeline Flow Meter Standards

BS ISO 14511:2002 Measurement of fluid flow in closed conduits. Thermal mass flowmeters
BS EN ISO 6817:1993 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
BS ISO 14511:2019 Tracked Changes. Measurement of fluid flow in closed conduits. Thermal mass flowmeters
BS 7405:1991 Guide to selection and application of flowmeters for the measurement of fluid flow in closed conduits
BS 7834:1995 Specification for turbine meters used for the measurement of gas flow in closed conduits
BS ISO TR 12764:1997 Measurement of fluid flow in closed conduits - Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
BS ISO TR 12764:1998 Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
BS EN ISO 20456:2019 Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
BS ISO/TR 12765:1998 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
BS ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
BS ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
BS ISO 12764:2017 Tracked Changes. Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
BS EN 29104:1991 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
16/30323541 DC BS ISO 20456. Measurement of fluid flow in closed conduits. Guidance for the use of electromagnetic flowmeters for conductive liquids
BS ISO/TR 12765:1999 Measurement of fluid flow in closed conduits. Methods using transit-time ultrasonic flowmeters
BS ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot statics tubes
BS 1042 Sec.2.3:1984 Measurement of fluid flow in closed conduits. Velocity area methods. Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
BS EN ISO 8316:1988 Method of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank
BS ISO 10790:2015 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
BS EN ISO 15002:2008+A1:2019 Flow-metering devices for connection to terminal units of medical gas pipeline systems
ASME B31.E-2008 Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems
BS 1042 Sec.2.4:1989 Measurement of fluid flow in closed conduits. Velocity-area methods. Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions
BS ISO 10790:1999 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
23/30456713 DC BS ISO 24062. Measurement of fluid flow in closed conduits. Clamp-on ultrasonic transit-time meters for liquids and gases
BS EN ISO 7278-2:2022 Petroleum measurement systems - Pipe prover design, calibration and operation
BS ISO 13053-1:2011 Quantitative methods in process improvement. Six Sigma. DMAIC methodology
22/30378715 DC BS EN ISO 15002. Flow-metering devices for connection to terminal units of medical gas pipeline systems
BS ISO 7278-4:1999 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Guide for operators of pipe provers
21/30444617 DC BS EN ISO 5167-6. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Part 6. Wedge meters
21/30444613 DC BS EN ISO 5167-5. Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full. Part 5. Cone meters
BS EN 13220:1999 Flow-Metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems Ratified European Text
20/30378712 DC BS EN ISO 15002 AMD2. Flow-metering devices for connection to terminal units of medical gas pipeline system
BS ISO/IEC/IEEE 24748-7000:2022 Systems and software engineering. Life cycle management - Standard model process for addressing ethical concerns during system design
BS ISO 8000-62:2018 Data quality - Data quality management: Organizational process maturity assessment: Application of standards relating to process assessment

American National Standards Institute （ANSI), Pipeline Flow Meter Standards

ANSI/ASME MFC-6M-1998 Fluid Flow in Pipes Using Vortex Flow Meters, Measurement of
ANSI/ASME MFC-16M-2007 Measurement of Fluid Flow in Closed Conduits by Means of Electromagnetic Flowmeters
ANSI/ASME MFC-6-2013 Measurement of Fluid Flow in Pipes Using Vortex Flow Meters
ANSI/ASME MFC-5.1-2011 Measurement of Liquid Flow in Closed Conduits Using Transit Time Ultrasonic Flowmeters
ANSI/ASME MFC-18M-2001 Measurement of Fluid Flow in Pipes Using Variable Area Meters
ANSI/ASME MFC-3M-2004 Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi
ANSI/ASME MFC-5M-1985 Measurement of Liquid Flow in Closed Conduits using Transit-Time Ultrasonic Flowmeters
ANSI/ASME MFC-5.3-2013 Measurement of Liquid Flow in Closed Conduits Using Doppler Ultrasonic Flowmeters
ANSI/ASHRAE 41.10 ERTA-2021 Standard Method for Refrigerant Mass Flow Measurement Using Flowmeters
ANSI/ASTM ISO 15002:2004 Flow-metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems, Adoption of ISO 15002 as an American National Standard (with Deviations)
ANSI/ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ANSI/ASHRAE 41.10-2013 Standard Methods for Volatile Refrigerant Mass Flow Measurement Using Flowmeters
ISO/DIS 24062:2023 Measurement of fluid flow in closed conduits - Clamp-on ultrasonic transit-time meters for liquids and gases
ANSI/ASME B31 Addenda e-2010 Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems
ANSI/ASME B31E-2008 Standard for the Seismic Design and Retrofit of Above Ground Piping Systems
ANSI/ASME B31E-2010 Standard for the Seismic Design and Retrofit of Above-Ground Piping Systems
ASTM C1924-23 Standard Practice for Design of Buried Precast Concrete Low-Head Pressure Pipe

Professional Standard - Urban Construction, Pipeline Flow Meter Standards

CJ/T 364-2011 Online calibration requirement for piping electromagnetic flowmeter
CJJ/T 164-2011 Standard for quality inspection of shield tunnel segment

Korean Agency for Technology and Standards (KATS), Pipeline Flow Meter Standards

KS B ISO 14511-2014(2019) Measurement of fluid flow in closed conduits — Thermal mass flowmeters
KS B ISO 14511:2004 Measurement of fluid flow in closed conduits-Thermal mass flowmeters
KS B ISO 14511:2014 Measurement of fluid flow in closed conduits — Thermal mass flowmeters
KS B ISO TR 3313-2014(2019) Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
KS B ISO TR 12765-2005(2020) Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
KS V 7111-2006(2011) Pipes of ships’s machinery－Standard velocity of flow
KS V 7111-1975 Pipes of ships’s machinery－Standard velocity of flow
KS B ISO TR 12764:2004 Measurement of fluid flow in closed conduits-Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
KS B ISO TR 12764:2014 Measurement of fluid flow in closed conduits-Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
KS B ISO TR 12764:2015 Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
KS B ISO 13359:2014 Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
KS B ISO 13359:2004 Measurement of conductive liquid flow in closed conduits-Flanged electromagnetic flowmeters-Overall length
KS V 7111-2006 Pipes of ships’s machinery-Standard velocity of flow
KS B ISO TR 12765:2005 Measurement of fluid flow in closed conduits－Methods using transit-time ultrasonic flowmeters
KS E ISO 7194-1:2003 Measurement of fluid flow in closed conduits􀫥 Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
KS B ISO 10790-2003(2018) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
KS B ISO 4064-1:2002 Measurement of water flow in closed conduits－Meters for cold potable water－Part 1：Specifications
KS B ISO 10790:2003 Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
KS B ISO 7858-1:2004 Measurement of water flow in closed conduits-Combination meters for cold potable water-Part 1:Specifications
KS B ISO 7858-1:2014 Measurement of water flow in closed conduits-Combination meters for cold potable water-Part 1:Specifications
KS B ISO 7858-1:2015 Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 1: Specifications
KS B ISO 4064-2:2002 Measurement of water flow in closed conduits－Meters for cold potable water－Part 2：Installation requirements and selection
KS B ISO 7858-2:2014 Measurement of water flow in closed conduits-Combination meters for cold potable water-Part 2:Installation requirements
KS B ISO 7858-2:2004 Measurement of water flow in closed conduits-Combination meters for cold potable water-Part 2:Installation requirements
KS B ISO 7858-2:2015 Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 2: Installation requirements
KS M ISO 7278-4:2003 Liquid hydrocarbons－Dynamic measurement－Proving systems for volumetric meters－Part 4：Guide for operators of pipe provers
KS A 9000-4-2003 QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS PART 4 : GUIDE TO DEPENDABILILTY PROGRAMME MANAGEMENT
KS D 0281-2005(2015) Standard test method for nondestructive measurement of film thickness of pipeline coatings on steel

International Organization for Standardization (ISO), Pipeline Flow Meter Standards

ISO 14511:2001 Measurement of fluid flow in closed conduits - Thermal mass flowmeters
ISO 14511:2019 Measurement of fluid flow in closed conduits — Thermal mass flowmeters
ISO 10790:1994 Measurement of fluid flow in closed conduits — Coriolis mass flowmeters
ISO 9951:1993 Measurement of glas flow in closed conduits; turbine meters
ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
ISO 7194:1983 Measurement of fluid flow in closed conduits; Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
ISO/TR 12765:1998 Measurement of fluid flow in closed conduits - Methods using transit-time ultrasonic flowmeters
ISO/TR 6817:1980 Measurement of conductive fluid flowrate in closed conduits — Method using electromagnetic flowmeters
ISO 9104:1991 Measurement of fluid flow on closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids
ISO 20456:2017 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
ISO 6817:1992 Measurement of conductive liquid flow in closed conduits; method using electromagnetic flowmeters
ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
ISO 5167-5:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters
ISO 5167-6:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 6: Wedge meters
ISO 17089-1:2010 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 1: Meters for custody transfer and allocation measurement
ISO 17089-2:2012 Measurement of fluid flow in closed conduits - Ultrasonic meters for gas - Part 2: Meters for industrial applications
ISO 7858-1:1985 Measurement of water flow in closed conduits; Meters for cold potable water; Combination meters; Part 1 : Specifications
ISO 3354:1988 Measurement of clean water flow in closed conduits; velocity-area method using current-meters in full conduits and under regular flow conditions
ISO/DIS 24062 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
ISO/FDIS 24062:2023 Measurement of fluid flow in closed conduits — Clamp-on ultrasonic transit-time meters for liquids and gases
ISO 10790:1999 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
ISO 7858-2:1987 Measurement of water flow in closed conduits; Meters for cold potable water; Combination meters; Part 2 : Installation requirements
ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
ISO 4064-2:1978 Measurement of water flow in closed conduits; Meters for cold potable water; Part II : Installation requirements
ISO 15002:2008/Amd 1:2018 Flow-metering devices for connection to terminal units of medical gas pipeline systems — Amendment 1
ISO/TR 13330:2013 Road vehicles - Calculation processes for the neck injury criteria in rear impact
ISO 7278-2:1988 Liquid hydrocarbons; dynamic measurement; proving systems for volumetric meters; part 2: pipe provers
ISO 8316:1987 Measurement of liquid flow in closed conduits; Method by collection of the liquid in a volumetric tank
ISO 4064-3:1983 Measurement of water flow in closed conduits; Meters for cold potable water; Part 3 : Test methods and equipment
ISO 7278-2:2022 Petroleum measurement systems — Part 2: Pipe prover design, calibration and operation

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Pipeline Flow Meter Standards

GB/T 20727-2006 Measurement of fluid flow in closed conduits Thermal mass flowmeters
GB/T 18940-2003 Measurement of gas flow in closed conduits--Turbine meters
GB/T 25922-2023 Measurement of fluid flow in closed pipes The flow is measured with a vortex flowmeter installed in a pipe of circular cross-section filled with fluid
GB/T 18659-2023 Guidelines for the use of electromagnetic flowmeters for measuring fluid flow in closed pipes
GB/T 25922-2010 Measurement of fluid flow in closed conduits.Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
GB/T 21446-2008 Measurement of natural gas flow by means of standard orifice meter
GB/T 51318-2019 Design Standards for Immersed Tube Tunnels
GB/T 18660-2002 Measurement of conductive liquid flow in closed conduits--Method using electromagnetic flowmeters
GB/T 9109.4-1988 Dynamic measurement of crude oil--The operating stipulations of verificating positive displacement meters by pipe prover
GB/T 20728-2006 Measurement of fluid flow in closed conduits Guidance to the selection installation and use of Coriolis meters
GB/T 18659-2002 Measurement of fluid flow in closed conduits--Methods of evaluating the performance of electromagnetic flow-meters for liquids
GB/T 20729-2006 Measurement of conductive liquid flow in closed conduits Flanged electromagnetic flowmeters Overall length
GB/T 18215.1-2000 Flow measurement of city manufactured gas in main pipes. Part 1: Method using standard orifice plate throttling device
GB/T 50459-2017 Oil and gas transmission pipeline spanning engineering design standards
GB 50991-2014 Technical standard for DC interference mitigation of buried steel pipeline
GB/T 50698-2011 Standard for AC interference mitigation of buried steel pipelines
GB/T 50644-2011 Standard for compiling the design documents of oil and gas pipeline projects
GB 50184-1993 Standard for checking and evaluating the quality of industrial metallic piping
GB 50185-1993 Standard for inspection and evaluation of thermal insulating work of industrial equipment and pipeline
GB/T 50185-2019 Construction quality acceptance criteria for industrial equipment and pipeline insulation engineering
GB 50185-93 Standards for Quality Inspection and Evaluation of Industrial Equipment and Pipeline Insulation Engineering

American Water Works Association (AWWA), Pipeline Flow Meter Standards

AWWA C750-2003 Transit-Time Flowmeters in Full Closed Conduits
AWWA C750-2016 Transit-Time Flowmeters in Full Closed Conduits

Professional Standard - Chemical Industry, Pipeline Flow Meter Standards

HG/T 20559.4-1993 Pipeline instrument flow chart design regulations Pipeline instrument flow chart pipeline numbering and labeling
HG/T 20579.2-1999 Quality Inspection Standard of Piping Models for Process Plant
HG/T 20579.2-1999（条文说明） Quality acceptance criteria for piping models of process units

未注明发布机构, Pipeline Flow Meter Standards

BS ISO/TR 12764:1997(1999) Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross - section conduits running full
BS 7405:1991(2000) Guide to Selection and application of flowmeters for the measurement of fluid flow in closed conduits
BS EN ISO 6817:1997(1999) Measurement of conductive liquid flow in closed conduits — Method using electromagnetic flowmeters
BS ISO 13359:1998(1999) Measurement of conductive liquid flow in closed conduits — Flanged electromagnetic flowmeters — Overall length
BS 5857-1.1:1980(2008)*ISO 2975-I:1974 Methods for measurement of Fluid flow in closed conduits, using tracers — Part 1 : Measurement of water flow — Section 1.1 General [ ISO title : Measurement of water flow in closed conduits — Tracer methods — Part I : General ]
BS 5857-2.1:1980(1999)*ISO 4053-I:1977 Methods for measurement of Fluid flow in closed conduits, using tracers — Part 2 : Measurement of gas flow — Section 2.1 General [ ISO title : Measurement of gas flow in conduits — Tracer methods — Part I : General ]

Association Francaise de Normalisation, Pipeline Flow Meter Standards

NF X10-111:1988 Measurement of clean water flow in closed conduits. Velocity-area method using current-meters in full conduits and under regular flow conditions.
NF X10-120:1995 Measurement of conductive liquid flow in closed conduits. Method using electromagnetic flow meters.
NF X10-121*NF EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids
NF X10-121:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids.
NF EN ISO 20456:2019 Mesurage du débit des fluides dans les conduites fermées - Lignes directrices pour l'utilisation des débitmètres électromagnétiques dans les liquides conducteurs
NF X10-102-5*NF EN ISO 5167-5:2016 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5 : cone meters
NF S95-169*NF EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
NF E51-766:2010 Ventilation des bâtiments - Éléments de calcul complémentaires des débits des conduits collectifs shunt en ventilation naturelle
NF EN ISO 5167-6:2022 Mesurage de débit des fluides au moyen d'appareils déprimogènes insérés dans des conduites en charge de section circulaire - Partie 6 : débitmètres à coin
NF M60-512:1984 X AND GAMMA REFERENCE RADIATIONS FOR CALIBRATING DOSEMETERS AND DOSE RATEMETERS AND FOR DETERMINING THEIR RESPONSE AS A FUNCTION OF PHOTON ENERGY.
NF EN ISO 7278-2:2022 Systèmes de mesurage des produits pétroliers - Partie 2 : conception, étalonnage et fonctionnement des tubes étalons
NF ISO 7661:1987 Aéronautique et espace - Systèmes de fluides - Peignes supports de tuyauteries à alignement axial - Conception et essais de qualification - Série métrique
NF M60-513:1990 X AND GAMMA REFERENCE RADIATIONS FOR CALIBRATING DOSEMETERS AND DOSE RATEMETERS AND FOR DETERMINING THEIR RESPONSE AS A FUNCTION OF PHOTON ENERGY. PHOTON REFERENCE RADIATIONS AT ENERGIES BETWEEN 4 MEV AND 9 MEV.

German Institute for Standardization, Pipeline Flow Meter Standards

DIN EN ISO 6817:1995 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992); German version EN ISO 6817:1995
DIN EN ISO 20456:2020-09 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017); German version EN ISO 20456:2019
DIN EN ISO 20456:2020 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
DIN EN ISO 15002:2020-05 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008 + Amd.1:2018); German version EN ISO 15002:2008 + A1:2019 / Note: To be replaced by DIN EN ISO 15002 (2022-07).
DIN EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008); English version of DIN EN ISO 15002:2008-11
DIN EN ISO 5167-5:2023-08 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2022); German version EN ISO 5167-5:2022
DIN EN ISO 5167-6:2023-08 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2022); German version EN ISO 5167-6:2022
DIN EN ISO 15002/A2:2020-02 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008/DAM 2:2019); German and English version EN ISO 15002:2008/prA2:2019 / Note: Date of issue 2020-01-10*Intended as an amendment to DIN EN ISO 15002 (20...
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
DIN EN ISO 7278-2:2023-03 Petroleum measurement systems - Part 2: Pipe prover design, calibration and operation (ISO 7278-2:2022); German version EN ISO 7278-2:2022

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Pipeline Flow Meter Standards

GB/T 35138-2017 Measurement of fluid flow in closed conduits—Ultrasonic transit-time meters for liquid
GB/T 34166-2017 Measumement of natural gas flow by means of standard nozzle meters
GB/T 34041.2-2017 Measurement of fluid flow in closed conduits—Ultrasonic meters for gas—Part 2: Meters for industrial applications
GB/T 34041.1-2017 Measurement of fluid flow in closed conduits—Ultrasonic meters for gas—Part 1: Meters for custody transfer and allocation measurement

Professional Standard - Petroleum, Pipeline Flow Meter Standards

SY/T 6143-2004 Measuring Natural Gas Flow with a Standard Orifice Flow Meter
SY/T 0017-1996 Standard of D.C. drainage protection for buried steel pipelines
SY/T 0032-2000 Standard for AC influence drainage protection of buried steel pipeline
SY/T 0017-2006 Standard of DC drainage protection for buried steel pipelines
SY/T 6143-1996 Standard orifice measurement method for natural gas flow
SY/T 6999-2014 General requirements for flow meters on-line verification with a traveling gas flow standard facility
SY 6999-2014 General requirements for on-line verification of flowmeters with mobile gas flow standard devices
SY/T 4104-1995 Standard for quality inspection and evaluation of petroleum construction engineering-pipeline crossing and aerial crossing project

KR-KS, Pipeline Flow Meter Standards

KS E ISO 7194-1-2018(2023) Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
KS B ISO 10790-2003(2023) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
KS B ISO 7858-2-2014 Measurement of water flow in closed conduits — Combination meters for cold potable water — Part 2: Installation requirements

HU-MSZT, Pipeline Flow Meter Standards

ES-UNE, Pipeline Flow Meter Standards

UNE-EN ISO 20456:2021 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
UNE 92315:2022 Measurement and quantification criteria for thermal insulation work of ducts.
UNE-EN ISO 5167-5:2016 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016)
UNE-EN ISO 5167-6:2021 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2019)
UNE-EN ISO 5167-5:2023 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2022)
UNE-EN ISO 15002:2008/A1:2020 Flow-metering devices for connection to terminal units of medical gas pipeline systems - Amendment 1 (ISO 15002:2008/Amd 1:2018)

TR-TSE, Pipeline Flow Meter Standards

TS 3072-1978 Measurement Of Clean Water Flow In Closed Conduits - Velocity - Area Method Using Current - Meters

VN-TCVN, Pipeline Flow Meter Standards

TCVN 6816-2001 Measurement of fluid flow in closed conduits.Methods using transit-time ultrasonic flowmeters
TCVN 4090-1985 Main pipelines for transporting oil and oil products.Design standard

European Committee for Standardization (CEN), Pipeline Flow Meter Standards

EN 29104:1993 Measurement of fluid flow in closed conduits; methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
EN ISO 20456:2019 Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids (ISO 20456:2017)
EN ISO 5167-6:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2022)
EN ISO 6817:1995 Measurement of Conductive Liquid Flow in Closed Conduits - Method Using Electromagnetic Flowmeters ISO 6817: 1992
EN 13220:1998 Flow-Metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems Ratified European Text
CEN EN 13220-1998 Flow-Metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems Ratified European Text
EN ISO 7278-2:2022 Petroleum measurement systems - Part 2: Pipe prover design, calibration and operation (ISO 7278-2:2022)
EN ISO 7278-2:1995 Liquid Hydrocarbons - Dynamic Measurement - Proving Systems for Volumetric Meters - Part 2: Pipe Provers (ISO 7278-2 : 1988)
EN ISO 8316:1995 Measurement of Liquid Flow in Closed Conduits - Method by Collection of the Liquid in a Volumetric Tank ISO 8316: 1987

API - American Petroleum Institute, Pipeline Flow Meter Standards

API MPMS 6.6-1981 Manual of Petroleum Measurement Standards Chapter 6—Metering Assemblies Section 6—Pipeline Metering Systems (FIRST EDITION)
API MPMS 6.6-1991 Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies Section 6 - Pipeline Metering Systems (Second Edition)
API MPMS 23.1-2016 Manual of Petroleum Measurement Standards Chapter 23.1 Reconciliation of Liquid Pipeline Quantities (FIRST EDITION)
API MPMS 5.3-1976 Manual of Petroleum Measurement Standards Chapter 5-Metering Section 3-Turbine Meters (First Edition)
API MPMS 5.3-2005 Manual of Petroleum Measurement Standards Chapter 5-Metering Section 3-Measurement of Liquid Hydrocarbons by Turbine Meters (Fifth Edition)
API MPMS 5.3-2000 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters (Fourth Edition)
API MPMS 5.3-1995 Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters (Third Edition)
API MPMS 14.12-2017 Manual of Petroleum Measurement Standards Chapter 14-Natural Gas Fluid Measurement Section 12-Measurement of Gas by Vortex Meters (FIRST EDITION)
API MPMS 20.3-2013 Manual of Petroleum Measurement Standards Chapter 20.3 Measurement of Multiphase Flow (First Edition)
API MPMS 20.3 RUSSIAN-2013 Manual of Petroleum Measurement Standards Chapter 20.3 Measurement of Multiphase Flow (First Edition)
API MPMS 5.3-1987 Manual of Petroleum Measurement Standards Chapter 5—Liquid Metering Section 3—Measurement of Liquid Hydrocarbons by Turbine Meters (SECOND EDITION)
API MPMS 14.8-1997 Manual of Petroleum Measurement Standards Chapter 14—Natural Gas Fluids Measurement Section 8—Liquefied Petroleum Gas Measurement (Second Edition)
API MPMS 21.1-2013 Manual of Petroleum Measurement Standards Chapter 21.1 - Flow Measurement Using Electronic Metering Systems - Electronic Gas Measurement (Second Edition)
API MPMS 21.2-1998 Manual of Petroleum Measurement Standards Chapter 21-Flow Measurement Using Electronic Metering Systems - Section 2-Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters (First Edition)
API MPMS 5.7-2003 Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 7 - Testing Protocol for Differential Pressure Flow Measurement Devices
API MPMS 21.2 ADD-2000 Manual of Petroleum Measurement Standards Chapter 21-Flow Measurement Using Electronic Metering Systems Addendum to Section 2-Flow Measurement Using Electronic Metering Systems@ Inferred Mass (First Edition)
API MPMS 5.8-2005 Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology (First Edition)
API MPMS 22.2-2005 Manual of Petroleum Measurement Standards Chapter 22Testing Protocol Section 2Differential Pressure Flow Measurement Devices (First Edition)
API MPMS 14.6-1991 Manual of Petroleum Measurement Standards Chapter 14—Natural Gas Fluid Measurement Section 6—Continuous Density Measurement (Second Edition)

IN-BIS, Pipeline Flow Meter Standards

Danish Standards Foundation, Pipeline Flow Meter Standards

DS/EN 29104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/ISO 9104:1994 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/EN 29104:1993 Measurement of fluid flow in closed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids
DS/EN ISO 6817:1996 Measurement of conductive liquid flow in closed conduits - Method using electromagnetic flowmeters
DS/EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
DS/EN ISO 7278-2:1996 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers

RU-GOST R, Pipeline Flow Meter Standards

GOST 8.407-1980 State system for ensuring the uniformity of measurements incompressible liquid flowmeters. Standardizes metrological characteristics
GOST 26969-1986 Standard orifice plates for flowmeters. Specifications
GOST R 55989-2014 Trunk gas pipelines. Design standard for pressure over 10 MPa. Principal requirements

Society of Automotive Engineers (SAE), Pipeline Flow Meter Standards

SAE AS5304-2017 Standard Specification for Turbine Flowmeters
SAE AS5304-2011 Standard Specification for Turbine Flowmeters
SAE AS4395B-2003 (R) FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
SAE AS4401-1996 SEPARABLE FITTINGS, PERMANENT FITTINGS, TUBING, FLUID SYSTEMS 8000 psi QUALIFICATION TEST STANDARD FOR
SAE AS4401-2013 Separable Fittings, Permanent Fittings, Tubing, Fluid Systems 8000 psi Qualification Test Standard For
SAE AS85720/1A-2020 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, DESIGN STANDARD FOR MALE END
SAE AS85720/1-2015 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, DESIGN STANDARD FOR MALE END
SAE AS85720/1B-2020 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, DESIGN STANDARD FOR MALE END

NL-NEN, Pipeline Flow Meter Standards

NEN-ISO 9104:1994 Measurement of fluid flow in xlosed conduits. Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Pipeline Flow Meter Standards

ASHRAE 41.10-2013 Standard Methods for Refrigerant Mass Flow Measurement Using Flowmeters
ASHRAE CH-03-6-2003 Symposium on Current Issues in Duct Design@ Construction@ and Airflow Measurement
ASHRAE 41.9-2018 Standard Methods for Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.9-1988 Standard Calorimeter Test Method for Flow Measurement of a Volatile Refrigerant

IT-UNI, Pipeline Flow Meter Standards

BE-NBN, Pipeline Flow Meter Standards

American Society for Testing and Materials (ASTM), Pipeline Flow Meter Standards

ASTM D5389-93(1997) Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
ASTM D5389-93(2019) Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems
ASTM D538-85(1997) Standard test method for open channel flow measurement by sonic anemometer systems
ASTM D3195-90(2004) Standard Practice for Rotameter Calibration
ASTM D3195/D3195M-10 Standard Practice for Rotameter Calibration
ASTM D3195/D3195M-10(2023) Standard Practice for Rotameter Calibration
ASTM F2550-13(2018) Standard Practice for Locating Leaks in Sewer Pipes By Measuring the Variation of Electric Current Flow Through the Pipe Wall
ASTM E968-02(2008) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E2029-99(2004) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM E2029-99 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM E202-09 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
ASTM E968-02 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
ASTM E2029-11(2019) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM B213-11 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
ASTM E2226-12 Standard Practice for Application of Hose Stream
ASTM D5243-92(2001) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
ASTM D5243-92(1996) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
ASTM D1941-91(1996) Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume
ASTM D5243-92(2019) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts
ASTM B213-20 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
ASTM B213-17 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
ASTM B213-13 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
ASTM E2029-11 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
ASTM F2550-13 Standard Practice for Locating Leaks in Sewer Pipes By Measuring the Variation of Electric Current Flow Through the Pipe Wall
ASTM F708-92(2004) Standard Practice for Design and Installation of Rigid Pipe Hangers
ASTM D2837-22 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
ASTM C1417-14e1 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
ASTM C1417-19 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
ASTM D5390-93(1997) Standard Test Method for Open Channel Flow Measurement of Water with Palmer-Bowlus Flumes
ASTM D5390-93(2002) Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes
ASTM D5390-93(2007) Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes
ASTM E2380-05 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM E2380/E2380M-09 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM B855-11 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
ASTM D5242-92(2001) Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs
ASTM D5242-92(2013) Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs
ASTM E477-13e1 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASTM E477-20 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASTM E2380/E2380M-15(2019) Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM D5089-95(1999) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
ASTM D4409-95(2003) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
ASTM D5089-95(2014) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
ASTM E2380/E2380M-15 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM F708-92(2008) Standard Practice for Design and Installation of Rigid Pipe Hangers
ASTM D4409-95(1999) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
ASTM D4409-95(2008) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
ASTM D4409-95(2014) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
ASTM D5422-00 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM C140-09a Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
ASTM C1409-98(2003) Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
ASTM C1409-12(2018) Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
ASTM C140-08 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
ASTM C140-08a Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
ASTM C140-09 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
ASTM D5129-95(1999) Standard Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions
ASTM F708-92(2014) Standard Practice for Design and Installation of Rigid Pipe Hangers
ASTM F948-94(2001)e1 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM F948-94 Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
ASTM F1201-88(1998) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0176F
ASTM F1201-88(2010) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&176F
ASTM F1201-88(2016) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0&xb0;F
ASTM F1201-88(2021) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0 ��F
ASTM C1417M-19 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
ASTM D3404-91(1998) Standard Guide for Measuring Matric Potential in the Vadose Zone Using Tensiometers
ASTM D3404-91(2013) Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
ASTM D3404-15 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
ASTM D2837-04 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
ASTM D2837-04e1 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
ASTM B855-17 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
ASTM D2321-18 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM E1926-08(2021) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
ASTM F645-18a Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
ASTM F645-04 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
ASTM F645-18 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
ASTM F645-18b Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM B790/B790M-11 Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
ASTM G12-07(2013) Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
ASTM F645-12 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
ASTM D3464-96 Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM F645-15a Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
ASTM F645-13 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
ASTM E2157-01 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
ASTM E2157-01(2005) Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
ASTM E2157-09 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
ASTM C446-88(1993)e1 Standard Test Method for Breaking Load and Calculated Modulus of Rupture of Preformed Insulation for Pipes (Withdrawn 2002)
ASTM F769-00 Standard Test Method for Measuring Transistor and Diode Leakage Currents (Withdrawn 2006)
ASTM E477-13 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASTM D6767-02 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
ASTM D6767-08 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
ASTM C518-91 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM B790/B790M-00(2006) Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
ASTM D2837-01 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
ASTM D2837-01a Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
ASTM D2837-01ae1 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
ASTM D2837-98a Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
ASTM F645-02 Standard Guide for Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
ASTM D2321-04e1 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2321-04 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM A341/A341M-16(2022) Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods
ASTM A341/A341M-16 Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods
ASTM F528-99 Standard Test Method of Measurement of Common-Emitter D-C Current Gain of Junction Transistors
ASTM F528-99(2005) Standard Test Method of Measurement of Common-Emitter D-C Current Gain of Junction Transistors
ASTM C1417M-13 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
ASTM C1417M-13a Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
ASTM C1417M-14 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design 40;Metric41;
ASTM B790/B790M-00 Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
ASTM B790/B790M-16(2021) Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
ASTM B790/B790M-16 Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
ASTM A927/A927M-11 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
ASTM A927/A927M-18 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
ASTM E1957-98 Standard Practice for Using Pneumatic Tubing for Roadway Traffic Counters and Classifiers
ASTM D2321-05 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2321-11 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2321-09 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM G12-07 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
ASTM E2157-15(2019) Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
ASTM E2157-15 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
ASTM B212-21 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM B212-12 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM B212-17 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM B212-13 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel

Japanese Industrial Standards Committee (JISC), Pipeline Flow Meter Standards

JIS F 7101:2002 Shipbuilding -- Pipes of machinery -- Standard velocity of flow

Lithuanian Standards Office , Pipeline Flow Meter Standards

LST EN 29104-2001 Measurement of fluid flow in closed conduits - Methods of evaluating the performance of electromagnetic flow-meters for liquids (ISO 9104:1991)
LST EN ISO 6817:2001 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992)
LST EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008)

国家市场监督管理总局、中国国家标准化管理委员会, Pipeline Flow Meter Standards

GB/T 20728-2021 Measurement of fluid flow in closed conduits—Guidance to the selection, installation and use of Coriolis flowmeters

AENOR, Pipeline Flow Meter Standards

UNE-EN 29104:1996 MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS. METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS. (ISO 9104:1991).
UNE 19062:1956 UNWELDED PIPE. QUALITY STANDARD.
UNE-EN ISO 6817:1996 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS. METHOD USING ELECTROMAGNETIC FLOWMETERS. (ISO 6817:1992).
UNE-EN ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008)
UNE 92301:2012 Measurement criteria for pipe systems and equipment thermal insulation works

International Commission on Illumination (CIE), Pipeline Flow Meter Standards

CIE 189-2010 CALCULATION OF TUNNEL LIGHTING QUALITY CRITERIA

Association of German Mechanical Engineers, Pipeline Flow Meter Standards

VDI/VDE 2640 Blatt 1-1993 Measurement of fluid flow in closed conduits; general guidelines and mathematical basics

Professional Standard - Environmental Protection, Pipeline Flow Meter Standards

HJ/T 367-2007 Technical requirement for environmental protection products. Electromagnetic pipe flowmeters
HJ/T 366-2007 Technical requirement for environmental protection products. Ultrasonic pipe flowmeters

National Metrological Technical Specifications of the People's Republic of China, Pipeline Flow Meter Standards

JJF 1627-2017 Calibration Specification for Reference Leaks by Soap Film Flowmeter
JJF 1708-2018 On Line Calibration Specification for Coriolis Mass Flowmeters by Master Meter Method

AT-ON, Pipeline Flow Meter Standards

ONORM EN 29104-1993 Measurement of fluid flow in closed conduits - Methods of evaluating the Performance of electromagnetic flow-meters forliquids (ISO 9104:1991)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Pipeline Flow Meter Standards

ITU-T L.11-1988 Joint Use of Tunnels by Pipelines and Telecommunication Cables@ and the Standardization of Underground Duct Plans

PL-PKN, Pipeline Flow Meter Standards

PN B02711-1990 Canalisation Continuing measurements of volumetric rate of flow in non pressure sewerage pipes Desing principles
PN G53045-1975 Wiercenia obrotowe normalno?rednicowe Sprawdzianu doci?gu gwintów rurowych przewodu wiertniczego

Indonesia Standards, Pipeline Flow Meter Standards

SNI ISO 15002:2011 Flow-metering devices for connection to terminal units of medical gas pipeline systems
SNI ISO 7278-2:2011 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Part 2: Pipe provers
SNI ISO 7278-4:2011 Liquid hydrocarbons – Dynamic measurement - Proving systems for volumetric meters - Part 4: Guide for operators of pipe provers

Professional Standard - Petrochemical Industry, Pipeline Flow Meter Standards

SH/T 3202-2018 Engineering Design Standards for Carbon Dioxide Transmission Pipeline
SH/T 3022-2019 Design specification for anticorrosion coating of equipment and piping in petrochemical engineering

International Electrotechnical Commission (IEC), Pipeline Flow Meter Standards

IEC PAS 62055-41:2003 Electricity metering - Payment metering systems - Part 41: Standard Transfer Specification

WRC - Welding Research Council, Pipeline Flow Meter Standards

BULLETIN 324-1987 INVESTIGATION OF DESIGN CRITERIA FOR DYNAMIC LOADS ON NUCLEAR POWER PIPING
BULLETIN 434-1998 DESIGN AND INSERVICE MARGINS OF POWER PIPING SYSTEMS: A COMPARATIVE STUDY OF U. S.@ CANADIAN AND EUROPEAN CODES & STANDARDS

American Welding Society (AWS), Pipeline Flow Meter Standards

WRC 296:1984 Fitness-For-Service Criteria For Pipeline Girth-Weld Quality

CN-STDBOOK, Pipeline Flow Meter Standards

图书 A-4676 Guidelines for establishing standards for flow standard devices: Implementation and application of JJF 1033-2016 "Measurement Standard Assessment Specifications"

Jiangsu Provincial Standard of the People's Republic of China, Pipeline Flow Meter Standards

DB32/T 4396-2022 Survey and Design Enterprise Quality Management Standards

International Telecommunication Union (ITU), Pipeline Flow Meter Standards

ITU-T L.11 FRENCH-1988 Joint Use of Tunnels by Pipelines and Telecommunication Cables and the Standardization of Underground Duct Plans
ITU-T L.11 SPANISH-1988 Joint Use of Tunnels by Pipelines and Telecommunication Cables and the Standardization of Underground Duct Plans

Standard Association of Australia （SAA）, Pipeline Flow Meter Standards

AS ISO 5167.5:2023 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full, Part 5: Cone meters
AS ISO 5167.6:2023 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full, Part 6: Wedge meters
AS 2360.7.2:1993 Measurement of fluid flow in closed conduits - Assessment of uncertainty in the calibration and use of flow measurement devices - Non-linear calibration relationships
AS 4250.2:1995 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Pipe provers
AS 2360.7.1:2001 Measurement of fluid flow in closed conduits - Assessment of uncertainty in the calibration and use of flow measurement devices - Linear calibration relationships
RUL PL.27-2002 Rulings to plumbing and piping systems Standards - General design requirements for sanitary plumbing systems (Ruling to AS 3500.2-1990)
RUL PL.1-2002 Rulings to plumbing and piping systems Standards - Installation of backflow prevention devices (Ruling to AS 3500.1-1992)
AS 3900.4:1994 Quality management and quality assurance Standards Part 4: Guide to dependability program mamagement

Canadian Standards Association (CSA), Pipeline Flow Meter Standards

CAN/CSA-Z15002-2012 Flow-Metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems (Second Edition)

CZ-CSN, Pipeline Flow Meter Standards

CSN 83 0615 Za-1985

RO-ASRO, Pipeline Flow Meter Standards

SR ISO 4064-1/C1:1996 Measurement of water flow in closed conduits - Meters for cold potable water - Part 1: Specifications

National Metrological Verification Regulations of the People's Republic of China, Pipeline Flow Meter Standards

JJG(电子) 04017-1988 BJ2900 Bipolar Transistor Reverse Cut-off Current Measurement Standard Instrument Trial Verification Regulations

CU-NC, Pipeline Flow Meter Standards

NC 90-19-21-1988 Standards System for Metrological Assurance. Low-Frequency Altern Current Millivoltimeters and Microamperimeters. Methods and Means of Verification
NC 90-14-30-1986 Metrological Assurance. Mercury and Mercury-Thallium Standard. Thermometers. Use and Conservation

Institute of Electrical and Electronics Engineers (IEEE), Pipeline Flow Meter Standards

IEEE P7000/D5, February 2021 IEEE Draft Standard for Model Process for Addressing Ethical Concerns During System Design
ISO/ IEC/IEEE 24748-7000 First edition 2022-11 IEEE/ISO/IEC International Standard--Systems and software engineering--Life cycle management--Part 7000: Standard model process for addressing ethical concerns during system design
ANSI/IEEE Std 738-1986 IEEE Standard for Calculation of Bare Overhead Conductor Temperature and Ampacity Under Steady-State Conditions
IEEE P628/D2, November 2019 IEEE Approved Draft Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations
IEEE 628-2001 Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations

国家能源局, Pipeline Flow Meter Standards

SY/T 0087.6-2021 Standards for Corrosion Evaluation of Steel Pipelines and Storage Tanks Part 6: Evaluation of AC Interference Corrosion of Buried Steel Pipelines

Underwriters Laboratories (UL), Pipeline Flow Meter Standards

UL 2585 BULLETIN-2008 UL Standard for Safety OUTLINE OF INVESTIGATION FOR REBUILT FLAMMABLE LIQUID METERS
UL 25-1990 Meters for flammable and combustible liquids and LP-gas
UL 25-1996 Meters for flammable and combustible liquids and LP-gas

PT-IPQ, Pipeline Flow Meter Standards

NP 2939-1987

NO-SN, Pipeline Flow Meter Standards

NS-ISO 9000-4:1993 Quality management and quality assurance standards. Part 4: Guide to dependability programme management

Hubei Provincial Standard of the People's Republic of China, Pipeline Flow Meter Standards

DB4201/T 671-2023 Consumption standards for urban gas pipeline projects (sub-high pressure and below)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Pipeline Flow Meter Standards

IEEE 738-1986 STANDARD FOR CALCULATION OF BARE OVERHEAD CONDUCTOR TEMPERATURE AND AMPACITY UNDER STEADY-STATE CONDITIONS

中国石油天然气总公司, Pipeline Flow Meter Standards

SY 4104-1995 Petroleum construction project quality inspection and assessment standards pipeline crossing projects

SAE - SAE International, Pipeline Flow Meter Standards

SAE J1858-1988 Full Flow Lubricating Oil Filters Multipass Method for Evaluating Filtration Performance@ Standard