ZH
RU
ES

Fiber Electric Furnace

Fiber Electric Furnace, Total:498 items.

In the international standard classification, Fiber Electric Furnace involves: Construction materials, Refractories, Industrial furnaces, Textile fibres, Equipment for petroleum and natural gas industries, Fibre optic communications, Components for electrical equipment, Electrical wires and cables, Insulating materials, Textile machinery, Materials for the reinforcement of composites, Power transmission and distribution networks, Products of the textile industry, Products of non-ferrous metals, Products of the chemical industry, Reinforced plastics, Fluid storage devices, Galvanic cells and batteries, Burners. Boilers, Rubber and plastics products, Electricity. Magnetism. Electrical and magnetic measurements, Insulation, Thermodynamics and temperature measurements, Production in the chemical industry, Networking, Analytical chemistry, Nuclear energy engineering, Electronic tubes, Telecommunication systems, ENERGY AND HEAT TRANSFER ENGINEERING, Telecommunications in general, Vocabularies, Electronic components in general, Energy and heat transfer engineering in general, Wood-based panels, Domestic, commercial and industrial heating appliances, Pipeline components and pipelines, General methods of tests and analysis for food products, Power stations in general, Electrical equipment for working in special conditions, Printed circuits and boards, Materials for aerospace construction, Coatings and related processes used in aerospace industry, On-board equipment and instruments, Electrical accessories, Road engineering, Protection against electric shock, Air quality.

YU-JUS, Fiber Electric Furnace

JUS F.S3.147-1982 Testing (Quantitative analysis) mixtures of fibres. Binary mixtures of cellulose fibres andasbestos. Electric fumace method
JUS N.A8.251-1990 Cellulosic papers for electrical purposes. Methods of test
JUS N.A8.250-1979 Celulosic papersfor electrical purposes. Definitions and general requirements
JUS N.A8.296-1984 Pressure-sensitive adhesive tapes for electrical purposes. Adhesive tapes made of cellulosic papar, with thermosetting adhesive

Professional Standard - Chemical Industry, Fiber Electric Furnace

HG/T 20642-1998 Design Specification of Refractory Fibre Linings of Chemical Industrial Furnace
HG/T 20642-1998（条文说明） Technical regulations for the design of refractory fiber linings for chemical industrial furnaces
HG/T 20642-2011 Specification of design in refractory fibre linings for chemical industrial furnace

BE-NBN, Fiber Electric Furnace

NBN T 52-118-1985

Jiangsu Provincial Standard of the People's Republic of China, Fiber Electric Furnace

DB32/T 4336-2022 Technical specification for the application of metallurgical slag fiber (MF) board

Professional Standard - Ferrous Metallurgy, Fiber Electric Furnace

YB/T 116-1997 Roller of refractory castable reinforced by stainless steel fibre

Professional Standard - Building Materials, Fiber Electric Furnace

JC/T 1028-2007 Tunnel type glass strand oven
JC/T 544-1994 Measurement and Calculation Method of Heat Balance of Glass Fiber Drawing Furnace
JC 980-2005 Fiber-cement pipe for evacuation of sewerage and joint

工业和信息化部, Fiber Electric Furnace

JC/T 2632-2021 Technical conditions of high temperature carbonization furnace for carbon fiber production
JC/T 2633-2021 Technical conditions of graphitization furnace for high modulus carbon fiber production
JC/T 980-2018 Fiber cement cable pipe and its joints

British Standards Institution (BSI), Fiber Electric Furnace

BS 6466:1984 Code of practice for design and installation of ceramic fibre furnace linings
BS ISO 21915-1:2020 Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends - Fibre identification using scanning electron microscopy and spectral analysis methods
BS EN 60454-3-8:2006 Pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
BS ISO 13931:2013 Carbon fibre. Determination of volume resistivity
BS ISO 20615:2018 Fibre ropes. Electrostatic surface potential measuring method
BS EN 60554-2:2002 Cellulosic papers for electrical purposes - Methods of test
BS EN IEC 60667-2:2020 Vulcanized fibre for electrical purposes - Methods of test
BS EN 60819-2:2002 Non-cellulosic papers for electrical purposes - Methods of test
19/30366978 DC BS ISO 21915-1. Textiles. Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends. Part 1. Fibre identification using scanning electron microscopy and spectral analysis methods
BS 5626-1:1979 Cellulosic papers for electrical purposes. Definitions and general requirements
BS EN IEC 60667-1:2020 Vulcanized fibre for electrical purposes - Definitions and general requirements
BS 5626-3.4:1980 Cellulosic papers for electrical purposes. Specifications for individual materials. Electrolytic capacitor paper
BS EN 50411-2-9:2010 Fibre organisers and closures to be used in optical fibre communications systems - Product specifications - Non-sealed closures for air blown fibre microduct cable, for category S & A
BS EN 50411-2-5:2009 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 2-5:Sealed closures for air blown fibre microduct, type 1, for category S & A
BS EN 60819-1:1996 Non-cellulosic papers for electrical purposes - Definitions and general requirements
BS EN 60819-1:2012 Non-cellulosic papers for electrical purposes. Definitions and general requirements
BS 5626-3.2:1985 Cellulosic papers for electrical purposes. Specification for individual materials. Capacitor paper
BS EN 62148-4:2004 Fibre optic active components and devices. Package and interface standards. PN 1x9 plastic optical fibre transceivers
BS EN 60819-3-4:2002 Non-cellulosic papers for electrical purposes - Specifications for individual materials - Aramid fibre paper containing not more than 50 % of mica particles - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles
BS EN 62148-4:2003 Fibre optic active components and devices - Package and interface standards - PN 1x9 plastic optical fibre transceivers
BS ISO 2648:2020 Wool. Determination of fibre length distribution parameters. Capacitance method
BS EN 60454-3-9:1998 Specifications for pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Cellulose acetate woven fabric tapes with rubber thermosetting adhesive
BS EN 60454-3-11:1998 Specifications for pressure-sensitive adhesive tapes for electrical purposes - Specifications for individual materials - Combination tapes made of creped cellulosic paper and polyethylene terephthalate film with rubber thermosetting adhesive
BS 5626-3.1:1981 Cellulosic papers for electrical purposes. Specifications for individual materials. General purpose paper
BS 5626-3.3:1982 Cellulosic papers for electrical purposes. Specification for individual materials. Crepe paper
BS 5626-3.5:1995 Cellulosic papers for electrical purposes. Specification for individual materials. Special papers
BS EN 60819-3-4:2014 Non-cellulosic papers for electrical purposes. Specifications for individual materials. Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles
BS EN 60249-2-1:1994 Base materials for printed circuits - Part 2: Specifications - Specification No. 1: Phenolic cellulose paper copper-clad laminated sheet, high electrical quality
BS EN 50411-3-5:2015 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications. Wall outlet
BS EN 60811-100:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General
BS EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
19/30381633 DC BS ISO 2648. Wool. Determination of fibre length distribution parameter. Capacitance method
BS EN IEC 60667-3-1:2020 Vulcanized fibre for electrical purposes - Specifications for individual materials. Sheet 1. Flat sheets
BS IEC 60874-14-1:1998 Connectors for optical fibres and cables - Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a, A1b
BS EN 62149-6:2004 Fibre optic active components and devices - Performance standards - 650-nm 250-Mbit/s plastic optical fibre transceivers
BS EN 61300-2-4:1997 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Tests - Fibre/cable retention
BS ISO 13794:1999 Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Fiber Electric Furnace

GB/T 14342-2015 Man-made fiber.Test method for specific resistance of staple fibers
GB/T 14342-1993 Testing method for specific resistance of synthetic staple fibres
GB/T 15738-1995 Test method of resistivity for fibre reinforced conducting and antistatic plastics
GB/T 15738-2008 Test method for resistivity of conducting and antistatic fiber reinforced plastics
GB/T 30812-2014 Glass fiber reinforced plastic flue for coal-fired units
GB/T 6098.2-1985 Test method for length of cotton fibres--Photoelectric length method
GB/T 20628.2-2006 Cellulosic papers for electrical purposes-Part2:Methods of test
GB/T 20629.2-2013 Non-cellulosic paper for electrical purposes.Part 2:Methods of test
GB/T 31134-2014 Fiber reinforced epoxy powder moulding compounds(EP-PMC) for electrical purposes
GB/T 12703.6-2010 Textile.Evaluation for electrostatic properties.Part 6:Fibre resistance leak
GB/T 30811-2014 Glass fiber reinforced plastic chimney liners for coal-fired units
GB/T 23641-2018 Fiber reinforced unsaturated polyester moulding compounds (SMC and BMC) for electrical purposes
GB/T 14346-1993 Testing method for yarn irregularity of man-made filament yarns by means of electronic evenness tester
GB/T 13780-1992 Test method for cotton length--auto-photoelectric stapler
GB/T 13782-1992 Test method for textile fibre length distribution parameters--Electric condenser method
GB/T 23641-2009 Fiber reinforced unsaturated polyester moulding.compounds(SMC and BMC)for electrical purposes
GB/T 23326-2009 Stainless steel fibers and cotton-polyester blended grey fabric electromagnetic shielding performance
GB/T 20628.1-2006 Specification for cellulosic papers for electrical purposes-Part1:Definitions and general requirements
GB/T 14346-2015 Man-made fiber.Testing method for unevenness of filament yarns.Capacitance method
GB/T 36422-2018 Man-made fiber.Test method for micro morphology and diameter.Scanning electron microscope method
GB/T 31135-2014 Fiber reinforced unsaturated polyester powder moulding compounds(UP-PMC)for electrical purposes
GB/T 23100-2008 Industrial rigid round winded tubes based on thermosetting resins for electrical purposes
GB/T 20629.1-2006 Non-cellulosic paper for electrical purposes-Part1:Definitions and general requirments
GB/T 29627.2-2013 Aramid pressboard for electrical purposes.Part 2:Methods of test
GB/T 12029.3-1989 Determination of PH of sodium carboxymethylcellulose for detergents (Potentiometric method)
GB/T 14275-1993 Fiber optic modulators. Part 2: Sectional specification. Waveguide electrooptic modulators

Professional Standard - Petrochemical Industry, Fiber Electric Furnace

SH/T 3128-2002 Ceramic fibre linings of fired heaters for general refinery service
SH/T 3128-2017 Technical specification for ceramic fiber lining of flame heating furnace in oil refinery

Underwriters Laboratories (UL), Fiber Electric Furnace

UL 1651-1997 Optical fiber cable

Taiwan Provincial Standard of the People's Republic of China, Fiber Electric Furnace

CNS 9976-1983 Silk and Polyester Fiber Corered Resistance Wires
CNS 3043-1986 Glass Mats for Storage Batteries
CNS 1410-1982 Strengthened Fiber Separator for Lead Storage Batteries
CNS 8427-1982 Glass Fiber Mat for Printed Circuit Board
CNS 11650-1986 Glassfiber Reinforced Plastic Electric Enclosure
CNS 9087-1982 Silicone Resin Glass Laminated Sheets for Electrical Insulation
CNS 6071-1987 600 V Silicon Rubber Insulated Glass Fiber Braided Wires
CNS 11651-1986 Method of Test for Glassfiber Reinforced Plastic Electric Enclosure
CNS 10557-1985 Copper-Clad Laminates for Printed Circuits (Synthetic Fiber Fabric Base, Epoxy Resin)
CNS 10558-1985 Copper-Clad Laminates for Printed Circuits (Glass Fabric Base, Epoxy Resin)
CNS 10614-1983 Polytetrafluoroethylene (Teflon) Insulated Polyamide Fiber (Nylon) Braided Electrical Wire

Canadian Standards Association (CSA), Fiber Electric Furnace

CSA C22.2 No.232-M1988-1988 Cables Optiques Premiere Edition; Fiche No 1
CSA C22.2 No.262-04-CAN/CSA-2004 Canalisations pour c鈈les ?fibres optiques et c鈈les de t閘閏ommunications Premi鑢e 閐ition

Korean Agency for Technology and Standards (KATS), Fiber Electric Furnace

KS C 2609-1978(2011) Silk and polyester fiber covered resistance wires
KS C 2609-1981 Silk and polyester fiber covered resistance wires
KS C 2609-1978 Silk and polyester fiber covered resistance wires
KS K ISO 20615:2022 Fibre ropes — Electrostatic surface potential measuring method
KS L ISO 13931:2018 Carbon fibre — Determination of volume resistivity
KS K 0170-2019 Test method for electrical surface resistivity of fabrics
KS C 6970-2014(2019) F01 Type connectors for optical fiber cables
KS C 6973-2014(2019) F03 Type connectors for optical fiber cables
KS C 6974-2014(2019) F04 Type connectors for optical fiber cables
KS C 6984-2014(2019) F14 Type connectors for optical fibre cables
KS C 6916-1995(2020) F11 Type connectors for optical fiber cables
KS C IEC 60554-2:2003 Cellulosic papers for electrical purposes－Part 2：Methods of test
KS C IEC 60554-2-2003(2018)
KS K ISO 2648:2009 Wool－Determination of fibre length distribution parameters－Electronic method
KS C IEC 60819-2:2021 Non-cellulosic papers for electrical purposes — Part 2: Methods of test
KS C IEC 60667-2:2018 Specification for vulcanized fibre for electrical purposes — Part 2: Methods of test
KS K ISO 2648:2018 Wool — Determination of fibre length distribution parameters — Electronic method
KS C IEC 60667-1:2021 Vulcanized fibre for electrical purpose —Part 1: Definitions and general requirements
KS C IEC 60667-2:2001 Specification for vulcanized fibre for electrical purposes－Part 2：Methods of test
KS C IEC 60819-1:2021 Non-cellulosic papers for electrical purposes — Part 1: Definitions and general requirements
KS C IEC 60554-3-4-2003(2018)
KS C IEC 61757-4-3:2021 Fibre optic sensors — Part 4-3: Electric current measurement —Polarimetric method
KS C IEC 60874-14-3-2003(2018)
KS C IEC 60874-14-4-2003(2018)
KS C IEC 60554-1:2014 Specification for cellulosic papers for electrical purposes — Part 1: Definitions and general requirements
KS C IEC 60667-1-2001(2016) Specification for vulcanized fibre for electrical purposes－Part 1：Definitions and general requirements
KS C IEC 60667-1-2001(2021) Specification for vulcanized fibre for electrical purposes－Part 1：Definitions and general requirements
KS C IEC 60874-14-1:2003 Connectors for optical fibres and cables－Part 14－1：Detail specification for fibre optic connector type SC－PC standard terminated to multimode fibre type A1a, A1b
KS C IEC 60874-14-2:2003 Connectors for optical fibres and cables－Part 14－2：Detail specification for fibre optic connector type SC－PC tuned terminated to single-mode fibre type B1
KS I ISO 10312:2008 Ambient air-Determination of asbestos fibers-Direct-transfer transmission electron microscopy method
KS I ISO 13794:2008 Ambient air－Determination of asbestos fibres－Indirect-transfer transmission electron microscopy method

Professional Standard - Textile, Fiber Electric Furnace

FZ/T 52032-2014 conductive polyamide staple fiber
FZ/T 52050-2018 Conductive polyester staple fiber
FZ/T 52032-2013 Conductive Nylon Staple Fiber
FZ/T 98009-2011 Electronic strength tester for single fiber
FZ/T 50035-2016 Synthetic filament yarns.Test method for electric resistance
FZ/T 98002-1992 Capacitive fiber length (automatic) tester
FZ/T 01044-1996 Determination of fiber leakage resistance for electrostatic properties of textile materials
FZ/T 90088-2017 Test method for anti-fiber clogging ability of textile motors
FZ/T 90088-1996 Test method for anti-fiber clogging ability of textile motors
FZ/T 20028-2015 Dehaired cashmere.Determination of fibre length and length distribution.Photoelectric method

Group Standards of the People's Republic of China, Fiber Electric Furnace

T/CSCM 04-2020 Carbon fiber heating cable
T/CTES 1030-2020 Measurement of diameter and their distribution of glass fibers of electronic filaments
T/ZGIA 103-2018 Graphene Coated Conductive Fiber
T/CSCM 01-2021 Fiber winding composite pole
T/GDCA 024-2023 Electrospinning fibrous film/membrane for cosmetic
T/SPSTS 002.2-2018 Performance evaluation of fiber-shaped energy storage devices—Part 2: Special requirements: Fiber-shaped lithium-ion batteries
T/CTES 1031-2020 Test method of spreading effect of electronic fiberglass woven fabric
T/ZZB 0654-2018 Glass fabric for wind power reinforced materials
T/ZZB 015-2015 Glass fiber direct roving for wind power
T/CSEE 0134-2019 Specifications for operation and maintenance of power fiber-to-the-home network
T/CSTM 00252-2020 Test method for carbon fiber electrical resistivity by Four-probe method
T/SCEPA 001-2023 Glass fiber reinforced inner rib silicon core plastic cable conduit
T/CEEIA 568-2022 Environmental friendly glass fiber reinforced phenolic moulding compound for electrical application
T/CNTAC 21-2018 Test method for identification of graphene materials in fibres– Transmission electron microscope (TEM) method
T/JSQA 039-2020 AGM (Absorptive Glass Mat) Separator of Lead Acid Battery
T/CEEIA 434-2020 Fiber reinforced unsaturated polyester low temperature curing moulding compound for electrical application
T/CEEIA 435-2020 Fiber reinforced unsaturated polyester fast curing moulding compound for electrical application
T/CEEIA 567-2022 Fiber reinforced unsaturated polyester low pressure curing moulding compound for electrical application
T/JCMS 0001-2019 Carbon fiber reinforced resin-based pultruded sheet for wind turbine blade girder
T/CEEIA 609-2022 Silicon rubber insulated fiber braided wind turbine generator connecting cables of rated voltages up to and including 3 kV

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Fiber Electric Furnace

GB/T 35931-2018 Test method for neps and short fiber content of cotton fibers—Photoelectric analyser
GB/T 32993-2016 Determination of volume resistivity of carbon fiber
GB/T 35675-2017 General technical requirements for metallized fiber used in electromagnetic shielding
GB/T 34520.6-2017 Test methods for continuous silicon carbide fiber－Part 6：Resistivity

GM Daewoo, Fiber Electric Furnace

GMKOREA EDS-M-5177-2013 30% Glass Fiber and Carbon Fiber Reinforced Conductive Polyamide 66 ????? ???? 30% ?? ??? ?????66 Version 2; English/Korean [Replaced: GMKOREA EDS-M-5177]

American Society for Testing and Materials (ASTM), Fiber Electric Furnace

ASTM C1335-04 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
ASTM C1335-12 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
ASTM C1335-04(2009) Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
ASTM C1335-12(2017) Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
ASTM E574-06 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
ASTM E574-00 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
ASTM E574-13 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
ASTM E574-23 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
ASTM D3353-10 Standard Test Methods for Fibrous-Insulated Magnet Wire
ASTM E574-19 Standard Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
ASTM D619-99 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D619-99(2004) Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D619-14 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D619-21 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ASTM D710-97(2002) Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
ASTM D710-97 Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
ASTM D710-19 Standard Specification for Vulcanized Fibre Sheets, Rolls, Rods, and Tubes Used for Electrical Insulation
ASTM D710-13 Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
ASTM D710-97(2009)e1 Standard Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
ASTM F3121/F3121M-16 Standard Guide for In-Service Inspection, Maintenance, and Electrical Testing of Hand-Held Live-Line Insulating Tools (Fiberglass-Reinforced Plastic (FRP))
ASTM F3121/F3121M-17 Standard Guide for In-Service Inspection, Maintenance, and Electrical Testing of Hand-Held Live-Line Insulating Tools (Fiberglass-Reinforced Plastic (FRP))

Professional Standard - Machinery, Fiber Electric Furnace

JB/T 12166-2015 Electric power capacitor cellulosic paper
JB/T 12173-2015 Polyester fibre woven tapes for electrical purposes
JB/T 9554-1999 Electrical polyester non - woven fabric
JB/T 6831-1993 Carbon fiber pointer for electric measuring instrument
JB/T 7630.1-1998 Microglass fiber separator for lead acid storage batteries
JB/T 7630.1-2008 Glass micro-fiber separators for lead-acid batteries
JB/T 5822-2015 Glass fiber reinforced phenolic moulding compounds for electrical purposes
JB/T 5822-1991 Phenolic aldehyde fibre glass moulding compounds for electrical insulation
JB/T 10322.3-2002 Resin impregnated glass fibre meshes for electrical purposes Part 3:Specification for individual types of meshes epoxide resin impregnated glass fibre meshes
JB/T 12172-2015 Glass and glass polyester fibre woven tapes for electrical purposes
JB/T 56073.49-1999 Quality classification of polyester fiber nonwoven fabrics for electrical use
JB/T 12165-2015 Halogen free low smoke flame retardance glass-backed tapes used for electrical insulation
JB/T 12167-2015 Unsaturated polyester glass mat laminated sheet for electrical insulation
JB/T 6236-2015 Resin impregnated glass banding tape for electrical insulation
JB/T 6236.2-1992 Resin impregnated fibre glass unidrectional binding tape for electrical purposes Test method
JB/T 6236.3-1992 Resin impregnated fibre glass unidrectional binding tape for electrical purposes Technical conditions
JB/T 10322.2-2002 Resin impregnated glass fibre meshes for electrical purposes Part 2:Test methods

JP-JCS, Fiber Electric Furnace

JCS 5502-2007 Heat proof optical fiber cables

Japanese Industrial Standards Committee (JISC), Fiber Electric Furnace

JIS C 6850:2001 General rules of optical fiber cables
JIS C 2315:1995 Vulcanized fibre sheets for electrical purposes
JIS C 2315:1999 Vulcanized fibre sheets for electrical purposes
JIS C 6851:2001 Optical fiber cable test procedures
JIS L 1030-4-1:2023 Textiles -- Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends -- Part 4-1: Fibre identification using scanning electron microscopy and spectral analysis methods
JIS C 2202:1995 Glass mats for lead-acid batteries
JIS C 5963:2001 General rules of connectors with optical fiber cables
JIS R 7609:2007 Carbon fibre -- Determination of volume resistivity
JIS C 5986:2006 F17 Type connectors for optical fiber cables
JIS K 3837:1995 Cellulose acetate membrane automated electrophoresis systems
JIS C 6870-3:2006 Outdoor optical fiber cables -- Part 3: Sectional specification
JIS C 6870-2:2006 Indoor optical fiber cables -- Part 2: Sectional specification
JIS C 2315-2:2021 Vulcanized fibre for electrical purposes -- Part 2: Methods of test
JIS C 2315-2:2010 Vulcanized fibre for electrical purposes -- Part 2: Methods of test
JIS C 5970:2015 F01 Type connectors for optical fiber cables (Type FC connector)
JIS R 3423:1995 Finished glass fabrics used for copper clad laminates and other electric purposes
JIS C 2300-2:2010 Cellulosic papers for electrical purposes -- Part 2: Methods of test
JIS C 5986:2014 F17 Type connectors for optical fiber cables (Type MU-SR connector)
JIS C 2323-3-4:2016 Non-cellulosic papers for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles
JIS C 2315-1:2021 Vulcanized fibre for electrical purposes -- Part 1: Definitions and general requirements
JIS C 2323-2:2015 Non-cellulosic papers for electrical purposes -- Part 2: Methods of test

AENOR, Fiber Electric Furnace

UNE 27072:1963 THIMBLES FOR TEXTILE FIBRE CABLES.
UNE 21373-2:1992 SPECIFICATION FOR VULCANIZED FIBRE FOR ELECTRICAL PURPOSES. METHODS OF TEST.
UNE-EN 60554-2:2003 Cellulosic papers for electrical purposes -- Part 2: Methods of test
UNE-EN 60819-2:2002 Non-cellulosic papers for electrical purposes -- Part 2: Methods of test.
ESPECIFICACION UNE 0059:2017 Fiberglass reinforced polyester poles for overhead power distribution lines and telephony lines
UNE 21373-3-1:1992 SPECIFICATION FOR VULCANIZED FIBRE FOR ELECTRICAL PURPOSES. SPECIFICATIONS FOR INDIVIDUAL MATERIALS. FLAT SHEETS.
UNE 21373-1:1984 INSULATING MATERIAL. VULCANIZED FIBRE FOR ELECTRICAL PURPOSES. DEFINITIONS AND GENERAL REQUIREMENTS.
UNE-EN 60450:2005 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
UNE 21367-1:1983 SPECIFICATION FOR CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES. PART 1: DEFINITIONS AND GENERAL REQUIREMENTS.
UNE 77253:2003 Ambient air. Determination of asbestos fibres -- Indirect-transfer transmission electron microscopy method

German Institute for Standardization, Fiber Electric Furnace

DIN 16740:1976 Textile glass; textile glass fabrics for electrical purposes, technical delivery specifications
DIN VDE 0365-3:1967 Regulations for varnished fibrous materials for electrical engineering; part 3: Varnished glass fabrics
DIN 16741:1976 Textile glass; tapes with edges consisting of textile glass fabrics for electrical purposes, technical delivery specifications
DIN VDE 0334-1:1972 Regulations for textile glass products in electrical engineering; part 1: Textile glass fabrics
DIN VDE 0311-33:1988 Cellulosic paper for electrical purposes; specifications; crłpe papers; identical with IEC 60554-3-3:1980
DIN VDE 0311-32:1988 Cellulosic paper for electrical purposes; specifications; capacitor papers; identical with IEC 60554-3-2:1983
DIN VDE 0311-34:1988 Cellulosic paper for electrical purposes; specifications; electrolytic capacitor papers; identical with IEC 60554-3-4:1979
DIN EN 60454-3-8:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3-
DIN EN 60794-2-10:2012 Optical Fibre Cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables (IEC 60794-2-10:2011); German version EN 60794-2-10:2011
DIN VDE 0311-31:1988 Cellulosic paper for electrical purposes; specifications; general purpose electrical papers; identical with IEC 60554-3-1:1979
DIN VDE 0311-35:1988 Cellulosic paper for electrical purposes; specifications; special paper; IEC 60554-3-5:1984, modified
DIN EN 3745-801:2022-07 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 801: Fibre movement under compression; English version prEN 3745-801:2022 / Note: Date of issue 2022-06-17
DIN EN 60819-2:2002 Non-cellulosic papers for electrical purposes - Part 2: Methods of test (IEC 60819-2:2001); German version EN 60819-2 2001
DIN VDE 0311-10:1988 Cellulosic paper for electrical purposes; definitions and general requirements; identical with IEC 60554-1:1977 (status 1983)
DIN EN 60454-3-8 Berichtigung 1:2007 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre (IEC 60454-3-
DIN VDE 0365-2:1967 Regulations for varnished fibrous materials for electrical engineering; part 2: Varnished fabrics
DIN VDE 0365-1:1967 Regulations for varnished fibrous materials for electrical engineering; part 1: Varnished papers
DIN VDE 0312:1959 Rules for testing methods for laminates; vulcanized fibres for electrical engineering

United States Navy, Fiber Electric Furnace

NAVY MIL-I-3158 D VALID NOTICE 1-1988 INSULATION TAPE, ELECTRICAL GLASS-FIBER (RESIN-FILLED): AND CORD, FIBROUS-GLASS
NAVY MIL-I-3158 D-1968 INSULATION TAPE, ELECTRICAL GLASS-FIBER (RESIN-FILLED): AND CORD, FIBROUS-GLASS
NAVY DOD-V-24675 NOTICE 1-1998 VALVES, BOILER BLOW SERVICE, MONEL, SHIPBOARD USE
NAVY DOD-V-24675-1986 VALVES, BOILER BLOW SERVICE, MONEL, SHIPBOARD USE
NAVY QPL-19166-2012 INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE, GLASS FIBER, PRESSURE-SENSITIVE
NAVY QPL-19166-30 NOTICE 1-2009 Insulation Tape, Electrical, High-Temperature, Glass Fiber, Pressure-Sensitive
NAVY QPL-19166-QPD-2009 Insulation Tape, Electrical, High-Temperature, Glass Fiber, Pressure-Sensitive
NAVY QPL-19166-QPD-2010 Insulation Tape, Electrical, High-Temperature, Glass Fiber, Pressure-Sensitive
NAVY QPL-19166-QPD-2011 Insulation Tape, Electrical, High-Temperature, Glass Fiber, Pressure-Sensitive
NAVY QPL-19166-2011 INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE, GLASS FIBER, PRESSURE-SENSITIVE
NAVY QPL-19166-2013 INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE, GLASS FIBER, PRESSURE-SENSITIVE
NAVY MIL-I-24330 NOTICE 1-1998 INSULATION SHEET, ELECTRICAL, LIGNO-CELLULOSIC, HIGH DENSITY, HARDBOARD
NAVY MIL-I-24330 (1)-1968 INSULATION SHEET, ELECTRICAL, LIGNO-CELLULOSIC, HIGH DENSITY, HARDBOARD
NAVY MIL-I-24330-1968 INSULATION SHEET, ELECTRICAL, LIGNO-CELLULOSIC, HIGH DENSITY, HARDBOARD
NAVY MIL-I-19166 C VALID NOTICE 1-1988 INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE, GLASS FIBER, PRESSURE-SENSITIVE
NAVY MIL-I-19166 C (1)-1976 INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE, GLASS FIBER, PRESSURE-SENSITIVE
NAVY MIL-I-19166 C-1963 INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE, GLASS FIBER, PRESSURE-SENSITIVE
NAVY MIL-I-22834 A NOTICE 1-1998 INSULATION, ELECTRICAL, DIELECTRIC BARRIER, LAMINATED, PLASTIC FILM AND SYNTHETIC FIBER MAT
NAVY MIL-I-22834 A (1)-1964 INSULATION, ELECTRICAL, DIELECTRIC BARRIER, LAMINATED, PLASTIC FILM AND SYNTHETIC FIBER MAT
NAVY MIL-I-22834 A-1962 INSULATION, ELECTRICAL, DIELECTRIC BARRIER, LAMINATED, PLASTIC FILM AND SYNTHETIC FIBER MAT
NAVY QPL-19166-30-2004 INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE, GLASS FIBER, PRESSURE-SENSITIVE

国家市场监督管理总局、中国国家标准化管理委员会, Fiber Electric Furnace

GB/T 20629.3-2019 Non-cellulosic papers for electrical purposes—Part 3: Unfilled aramid (aromatic polyamide) papers
GB/T 20629.4-2021 Non-cellulosic papers for electrical purposes—Part 4：Aramid fibre paper containing mica particles
GB/T 36494-2018 Determination of the electrostatic property for glass fiber roving

National Metrological Technical Specifications of the People's Republic of China, Fiber Electric Furnace

JJF(纺织) 097-2021 Calibration Specification for Fiber Specific Resistance Meters
JJF(纺织)097-2021 Calibration Specification for Fiber Specific Resistance Meters
JJF(纺织) 016-2010 Calibration specification for fibre strength tester
JJF(纺织)016-2010 Calibration Specification for Fibre Strength Tester
JJF(纺织) 024-1989 Verification method of electronic single fiber strength machine

Insulated Cable Engineers Association （ICEA), Fiber Electric Furnace

ICEA S-104-696-2001 Indoor-Outdoor Optical Fiber Cable .

RU-GOST R, Fiber Electric Furnace

GOST 19806-1974 Chemical threads. Method of electric resistance determination
GOST R ISO 13931-2015 Carbon fibre. Methods for determination of volume resistivity
GOST 12652-1974 Electrotechnical glass-cloth-base laminate. Specifications
GOST 22227-1988 Man-made fiber and tow. Method of determination for electric resistance
GOST 28580-1990 Non-cellulosic papers for electrical purposes. Definitions and general requirements
GOST 30248-2013 Electrical carbon products. Electrical heating appliances made of carbon fiber materials. General specifications
GOST 30248-1997 Electrical carbon products. Electrical heating appliances made of carban fibre materials. General specifications
GOST 30180.2-1999 Paper cellulosic for electrical purposes. Part 2. Methods of test
GOST 30180.1-1999 Paper cellulosic for electrical purposes. Specification. Part 1. Definitions and general requirements
GOST 28027-1989 Adhesive tape for electrical insulation. Requirements for paper tapes with thermosetting adhesive

SE-SIS, Fiber Electric Furnace

SIS SS IEC 554:1983 Specification for cellulosic papers for electrical purposes
SIS SS IEC 554:1987 Insulating materials - Specification for cellulosic papers for electrical purposes

International Organization for Standardization (ISO), Fiber Electric Furnace

ISO 13931:2013 Carbon fibre.Determination of volume resistivity
ISO 20615:2018 Fibre ropes - Electrostatic surface potential measuring method
ISO 21915-1:2020 Textiles — Qualitative and quantitative analysis of some cellulose fibres (lyocell, cupro) and their blends — Part 1: Fibre identification using scanning electron microscopy and spectral analysis meth
ISO 2648:1974 Wool; Determination of fibre length distribution parameters; Electronic method
ISO 2648:2020 Wool — Determination of fibre length distribution parameters — Capacitance method
ISO/FDIS 17751-2 Textiles — Quantitative analysis of cashmere, wool, other specialty animal fibres and their blends — Part 2: Scanning electron microscopy method
ISO 13794:1999 Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method
ISO 10312:1995 Ambient air - Determination of asbestos fibres - Direct-transfer transmission electron microscopy method

IN-BIS, Fiber Electric Furnace

NEMA - National Electrical Manufacturers Association, Fiber Electric Furnace

NEMA FG 1-1986 FIBERGLASS CABLE TRAY SYSTEMS
NEMA FG 1-1993 Fiberglass Cable Tray Systems (Revision No.1 - November 1994)

Association Francaise de Normalisation, Fiber Electric Furnace

NF C93-850-2-20:2003 Optical fibre cables - Part 2-20 : indoor cables - Family specification for multi-fibre optical distribution cables.
NF C93-850-2-20*NF EN 60794-2-20:2015 Optical fibre cables - Part 2-20 : indoor cables - Family specification for multi-fibre optical distribution cables
NF EN ISO 17751-2:2016 Textiles - Analyse quantitative du cachemire, de la laine, d'autres fibres animales spéciales et leurs mélanges - Partie 2 : méthode par microscopie électronique à balayage
NF C26-148-8*NF EN 60454-3-8:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3 : specifications for individual materials - Sheet 8 : woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
NF C93-859-3*NF EN 187103:2003 Family specification - Optical fibre cables for indoor applications
NF C93-850-2-10*NF EN 60794-2-10:2011 Optical fibre cables - Part 2-10 : indoor optical fibre cables - Family specification for simplex and duplex cables.
NF C93-800:1991 SEMICONDUCTOR DEVICES. GENERIC SPECIFICATION FOR OPTICAL FIBRE SENSOR.
NF C93-850-2-30:2003 Optical fibre cables - Part 2-30 : indoor cables - Family specification for optical fibre ribbon cables.
NF EN 60819-3-1:2002 Papiers non cellulosiques à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 1 : papier chargé à base de fibres de verre
NF C26-197*NF EN 60554-2:2003 Cellulosic papers for electrical purposes - Part 2 : methods of test
NF C26-667-2*NF EN IEC 60667-2:2020 Vulcanized fibre for electrical purposes - Part 2 : methods of test
NF EN 60554-2:2003 Papiers cellulosiques à usages électriques - Partie 2 : méthodes d'essai
NF EN IEC 60667-2:2020 Fibres vulcanisées à usages électriques - Partie 2 : méthodes d'essai
NF C27-228-2*NF EN 60819-2:2002 Non-cellulosic papers for electrical purposes - Part 2 : methods of test
NF G07-094*NF ISO 2648:2020 Wool - Determination of fibre length distribution parameters - Capacitance method
NF EN 60819-2:2002 Papiers non cellulosiques à usages électriques - Partie 2 : méthodes d'essai
NF ISO 2648:2020 Laine - Détermination des paramètres de distribution de longueur des fibres - Méthode capacitive
NF C93-850-2-21/A1*NF EN IEC 60794-2-21/A1:2021 Optical fibre cables - Part 2-21 : indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
NF C93-850-2-31:2006 Optical fibre Cables - Part 2-31 : indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling.
NF C93-850-2:2003 Optical fibre cables - Part 2 : indoor cables - Sectional specification.
NF C26-170:1984 Solid insulating materials. Vulcanized fibre for electrical purposes. General requirements.
NF EN 60819-3-4:2014 Papiers non cellulosiques pour usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 4 : papier en fibre aramide ne contenant pas plus de 50 % de particules de mica
NF C26-667-1*NF EN IEC 60667-1:2020 Vulcanized fibre for electrical purposes - Part 1 : definitions and general requirements
UTE C26-170U*UTE C26-170:1986 Solid insulating materials. Vulcanized fibre for electrical purposes. Relevant article sheets.
NF EN IEC 60667-1:2020 Fibres vulcanisées à usages électriques - Partie 1 : définitions et exigences générales
NF C27-228-3-4:2002 Non-cellulosic papers for electrical purposes - Part 3 : specifications for individual materiels - Sheet 4 : aramid fibre paper containing not more than 50 % of mica particles.
NF C27-228-3-4*NF EN 60819-3-4:2014 Non-cellulosic papers for electrical purposes - Part 3 : specifications for individual materials - Sheet 4 : aramid fibre paper containing not more than 50 % of mica particles
NF C27-228-1*NF EN 60819-1:2012 Non-cellulosic papers for electrical purposes - Part 1 : definitions and general requirements
NF C27-228-1:1995 Non-cellulosic papers for electrical purposes. Part 1 : definitions and general requirements.
NF EN 60819-1:2012 Papiers non cellulosiques à usages électriques - Partie 1 : définitions et exigences générales
UTE C26-170:1986 Isolants solides - Fibres vulcanisées à usages électriques. Recueil des spécifications particulières.
NF C93-883-4*NF EN 62148-4:2003 Fibre optic ative components and devices - Package and interface standards - Part 4 : PN 1 x 9 plastic optical fibre transceivers.
NF C93-850-2-30*NF EN 60794-2-30:2015 Optical fibre cables - Part 2-30 : indoor cables - Family specification for ribbon cables
NF C93-902-37:2007 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37 : tests - Cable bending for fibre optic closures.
NF X43-067*NF ISO 10312:2020 Ambient air - Determination of asbestos fibres - Direct transfer transmission electron microscopy method
NF X43-054*NF ISO 13794:2020 Ambient air - Determination of asbestos fibres - Indirect-transfer transmission electron microscopy method

American Society of Mechanical Engineers (ASME), Fiber Electric Furnace

ASME BPVC Section 10-2001 ASME Boiler & Pressure Vessel Code - Section 10: Fiber-Reinforced Plastic Pressure Vessels
ASME BPVC Section 10-2004 ASME Boiler & Pressure Vessel Code - Section 10: Fiber-Reinforced Plastic Pressure Vessels
ASME BPVC Section 10-2007 ASME Boiler & Pressure Vessel Code - Section 10: Fiber-Reinforced Plastic Pressure Vessels
ASME BPVC Section 10-2010 ASME Boiler & Pressure Vessel Code - Section 10: Fiber-Reinforced Plastic Pressure Vessels
ASME BPVC Section 10-2013 ASME Boiler & Pressure Vessel Code - Section 10: Fiber-Reinforced Plastic Pressure Vessels
ASME BPVC Section 7-2001 ASME Boiler & Pressure Vessel Code - Section 7: Recommended Guidelines for the Care of Power Boilers
ASME BPVC Section 7-2004 ASME Boiler & Pressure Vessel Code - Section 7: Recommended Guidelines for the Care of Power Boilers
ASME SEC X-1998 BPVC SECTION X Fiber-Reinforced Plastic Pressure Vessels Non-Interfiled(Boiler and Pressure Vessel Codes)
ASME BPVC Section 10 Addenda-2005 ASME Boiler & Pressure Vessel Code - Section 10: Fiber-Reinforced Plastic Pressure Vessels; 2005 Addenda July 1,2005
ASME BPVC Section 10 Addenda 2006-2006 ASME Boiler & Pressure Vessel Code - Section 10: Fiber-Reinforced Plastic Pressure Vessels; 2006 Addenda July 1, 2006
ASME SEC X ADD-1999 BPVC SECTION X 1999 Addenda, Fiber-Reinforced Plastic Pressure Vessels Non-Interfiled(Boiler and Pressure Vessel Codes)
ASME BPVC Section 7 Addenda 2009-2009 ASME Boiler & Pressure Vessel Code - Section 7: Recommended Guidelines for the Care of Power Boilers; 2009b Addenda July 1, 2009

KR-KS, Fiber Electric Furnace

KS K ISO 20615-2022 Fibre ropes — Electrostatic surface potential measuring method
KS L ISO 13931-2018 Carbon fibre — Determination of volume resistivity
KS K ISO 16549-2015 Textiles－Unevenness of textile strands－Capacitance method
KS C IEC 60819-2-2021 Non-cellulosic papers for electrical purposes — Part 2: Methods of test
KS K ISO 2648-2018 Wool — Determination of fibre length distribution parameters — Electronic method
KS C IEC 60667-2-2018 Specification for vulcanized fibre for electrical purposes — Part 2: Methods of test
KS C IEC 60667-1-2021 Vulcanized fibre for electrical purpose —Part 1: Definitions and general requirements
KS C IEC 60819-1-2021 Non-cellulosic papers for electrical purposes — Part 1: Definitions and general requirements
KS C IEC 61757-4-3-2021 Fibre optic sensors — Part 4-3: Electric current measurement —Polarimetric method

国家发展和改革委员会, Fiber Electric Furnace

JC/T 980-2005 Fiber cement cable pipe and its joints

Henan Provincial Standard of the People's Republic of China, Fiber Electric Furnace

DB41/T 755-2012 Supervision and Inspection Regulations for Installation, Retrofit and Maintenance of Power Plant Boilers

International Telecommunication Union (ITU), Fiber Electric Furnace

ITU-T L.25-2015 Optical fibre cable network maintenance (Study Group 15)
ITU-T SERIES G SUPP 47-2012 General aspects of optical fibres and cables (Study Group 15)

Professional Standard - Electricity, Fiber Electric Furnace

DL/T 802-2002 Cable ducts fabricated from fiberglass reinforced plastics
DL/T 5797-2019 Specifications for construction of fiber-reinforced concrete for hydropower and water conservancy projects
DL/T 802.5-2007 Technical requirements for electric cable conduits.Part 5:Cable conduits of fiber-cement
DL/T 802.2-2017 Technical requirements for electric cable conduits.Part 2:Cable conduits of fiberglass reinforced plastics
DL/T 802.2-2007 Technical requirements for electric cable conduits.Part 2:Cable conduits of fiberglass reinforced plastics

Military Standard of the People's Republic of China-General Armament Department, Fiber Electric Furnace

GJB 9473-2018 Specification for Low Dielectric Transparent Fiberglass Cloth
GJB 6919-2009 Test and evaluation methods of conductorial-fibre performance
GJB 3537A-2021 Specification for fiber-reinforced plastic broadband radomes for electronic countermeasures
GJB 3537-1999 Specification for fiber-reinforced plastic broadband radomes for electronic countermeasures
GJB 5246-2003 Specification for resin-impregnated fiberglass lashing tape for electrical insulation

American National Standards Institute （ANSI), Fiber Electric Furnace

ANSI/TIA/EIA 455-201-2001 Return Loss of Connectorized Polarization-Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies
ANSI/SCTE 174-2010 Radio Frequency over Glass Fiber-to-the-Home Specification
ANSI T1.105.05-2002 Telecommunications – Synchronous Optical Network (SONET) – Tandem Connection Maintenance
ANSI/TIA/EIA 455-200-2001 Insertion Loss of Connectorized Polarization - Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies
ANSI/ASTM D710:2013 Specification for Vulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation
ANSI/NCCLS H8-A 2-1997 Abnormal Hemoglobin Using Cellulose Acetate Electrophoresis, Detection of
ANSI/ASTM D619:2021 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
ANSI/UL 746Ea-2013 Standard for Safety for Polymeric Materials; Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used in Printed-Wiring Boards
ANSI/UL 746Eb-2013 Standard for Safety for Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used in Printed-Wiring Boards
ANSI/UL 746Ec-2013 Standard For Safety For Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used In Printed-Wiring Boards
ANSI/UL 746E-2013 Standard for Safety for Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used in Printed-Wiring Boards
ANSI C136.20-2012 Roadway and Area Lighting Equipment - Fiber Reinforced Composite (FRC) Lighting Poles

API - American Petroleum Institute, Fiber Electric Furnace

API TR 942-A-2014 Materials@ Fabrication@ and Repair Considerations for Hydrogen Reformer Furnace Outlet Pigtails and Manifolds (FIRST EDITION)

Danish Standards Foundation, Fiber Electric Furnace

DS/EN 60794-2-20:2010 Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical distribution cables
DS/EN 60794-2-21:2012 Optical fibre cables - Part 2-21: Indoor optical fibre cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
DS/EN 60554-2:2002 Cellulosic papers for electrical purposes - Part 2: Methods of test
DS/EN 60819-2:2002 Non-cellulosic papers for electrical purposes - Part 2: Methods of test
DS/IEC 554-2:1986 Specification for cellulosic papers for electrical purposes. Part 2: Methods of test
DS/IEC 667-2+Amd.1:1988 Specification for vulcanized fibre for electrical purposes - Part 2: Methods of test
DS/EN 60819-1:2012 Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements
DS/EN 60819-3-4:2002 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % mica particles
DS/EN 60450/A1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials

International Electrotechnical Commission (IEC), Fiber Electric Furnace

IEC 60454-3-8:2006 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 8 - Woven fabric tapes with pressure-sensitive adhesive based on glass, cellulose acetate alone or combined with viscose fibre
IEC 60874-1:2011 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification
IEC 60554-2:2001 Cellulosic papers for electrical purposes - Part 2: Methods of test
IEC 60819-2:2001 Non-cellulosic papers for electrical purposes - Part 2: Methods of test
IEC 60794-2-21:2020 Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
IEC 61274-1-1:2011 Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1-1: Blank detail specification
IEC 60874-1-1:2011 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1-1: Blank detail specification
IEC 60794-4-1:1999 Optical fibre cables - Part 4-1: Aerial optical cables for high-voltage power lines
IEC TR 62263:2005 Live working - Guidelines for the installation and maintenance of optical fibre cables on overhead power lines
IEC 60667-1:2020 Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements
IEC 61300-2-4:2019 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention
IEC 61300-2-4:2019 RLV Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention
IEC 61300-2-4:2019+AMD1:2020 CSV Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention
IEC 60819-1:1995 Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements
IEC 60819-1:2009 Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements
IEC 60667-2:2020 Vulcanized fibre for electrical purposes - Part 2: Methods of test
IEC 60819-3-4:2001 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials; Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles
IEC 62149-4:2003 Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
IEC 60819-3-4:2013 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles
IEC 60554-1:1977 Specification for cellulosic papers for electrical purposes. Part 1 : Definitions and general requirements
IEC 60794-2-41:2008 Optical fibre cables - Part 2-41: Indoor cables - Product specification for simplex and duplex buffered A4 fibres
IEC 60667-2:1982/AMD1:1986 Amendment 1 - Specification for vulcanized fibre for electrical purposes. Part 2: Methods of test
IEC PAS 61249-6-3:2011 Specification for finished fabric woven from "E"-glass for printed boards
IEC 60819-1:1985 Specification for non-cellulosic papers for electrical purposes. Part 1 : Definitions and general requirements

HU-MSZT, Fiber Electric Furnace

U.S. Military Regulations and Norms, Fiber Electric Furnace

ARMY MIL-C-572 G (1)-1972 CORDS, YARNS AND MONOFILAMENTS ORGANIC SYNTHETIC FIBER
ARMY MIL-C-572 G-1972 CORDS, YARNS AND MONOFILAMENTS ORGANIC SYNTHETIC FIBER

National Metrological Verification Regulations of the People's Republic of China, Fiber Electric Furnace

JJG(纤检) 04-1993 Verification rules for electronic single fiber strength tester
JJG(纤检) 01-1993 Verification regulations for capacitive fiber length measuring instrument

国家能源局, Fiber Electric Furnace

NB/T 20410-2017 Technical regulations for fiber concrete in nuclear power projects

IT-UNI, Fiber Electric Furnace

Guangdong Provincial Standard of the People's Republic of China, Fiber Electric Furnace

DB44/T 107-2000 Energy-saving glass fiber reinforced plastic cooling tower
DB44/T 1877-2016 Inorganic high-performance fiber composite power support
DB44/T 1068-2012 Technical specifications for powder electrostatic spraying of medium density fiberboard

机械电子工业部, Fiber Electric Furnace

JB 5822-1991 Phenolic fiberglass molding compound for electrical insulation

Professional Standard - Agriculture, Fiber Electric Furnace

162药典三部-2010 Appendix IV Electrophoresis Method IVA Cellulose Acetate Membrane Electrophoresis Method
NY/T 2211-2012 Determination of irradiated food containing cellulose.Electron spin resonance spectroscopy

GM North America, Fiber Electric Furnace

GM GMP.PA12.011-2000 Nylon 12 - 10% Glass, 10% Carbon Fiber Reinforced, Conductive

(U.S.) Telecommunications Industries Association , Fiber Electric Furnace

TIA-5150000-1986 Generic Specification for Optical Fiber and Cable Splices
TIA-6090000-2000 Generic Specification for Optical Fiber Splices
TIA TSB-130-2003 Generic Guidelines for Connectorized Polarization Maintaining Fiber and Polarizing Fiber Cable Assemblies for Use in Telecommunications Applications

European Standard for Electrical and Electronic Components, Fiber Electric Furnace

CECC 86 275-801 ISSUE 1-1995 Connector Sets for Optical Fibres and Cables; Type LSH En; Fr; Ge
CECC 86 275-801-1999 Detail Specification: Connector sets of assessed quality for optical fibres and cables type LSH universal
CECC 86 275-802-1999 Detail Specification: Connector sets of assessed quality for Optical Fibres and Cables Type LSH-HRL universal
CECC 86 275-802 ISSUE 1-1995 Detail Specification: Connector Sets for Optical Fibres and Cables Type LSH-HRL

European Committee for Electrotechnical Standardization（CENELEC）, Fiber Electric Furnace

EN IEC 60667-2:2020 Vulcanized fibre for electrical purposes - Part 2: Methods of test
EN 60819-3-1:2001 Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: Filled Glass Paper
EN IEC 60794-2-21:2019 Optical fibre cables - Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
EN IEC 60667-1:2020 Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements
EN 60819-3-4:2014 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles
EN 60554-2:2002 Cellulosic Papers for Electrical Purposes - Part 2: Methods of Test
EN 60819-1:2012 Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements
EN 60819-2:2001 Non-Cellulosic Papers for Electrical Purposes Part 2: Methods of Test

ES-UNE, Fiber Electric Furnace

UNE-EN IEC 60667-2:2020 Vulcanized fibre for electrical purposes - Part 2: Methods of test (Endorsed by Asociación Española de Normalización in August of 2020.)
ESPECIFICACION UNE 0072:2021 Fiberglass reinforced polyester poles for overhead telecommunication lines.
UNE-EN IEC 60667-1:2020 Vulcanized fibre for electrical purposes - Part 1: Definitions and general requirements (Endorsed by Asociación Española de Normalización in July of 2020.)
UNE-EN 60819-3-4:2014 Non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 4: Aramid fibre paper containing not more than 50 % of mica particles (Endorsed by AENOR in June of 2014.)
UNE-EN 60819-1:2012 Non-cellulosic papers for electrical purposes Part 1: Definitions and general requirements (Endorsed by AENOR in April of 2012.)

ES-AENOR, Fiber Electric Furnace

UNE 21-367 Pt.2-1992
UNE 21-373 Pt.2-1992 Specification for vulcanized fibre for electrical purposes. Methods of test

Professional Standard - Electron, Fiber Electric Furnace

SJ 20767-1999 Switches,electrical and fiber optic,packaging of,general specification for
SJ/T 11090-1996 Properties and test methods for antistatic silk fabric of synthetic filament in electronic industry

TH-TISI, Fiber Electric Furnace

TIS 703-1987(en) COPPER-CLAD LAMINATED SHEET FOR PRINTED CIRCUITS : PHENOLIC CELLULOSE PAPER
TIS 704-1987 Standard for copper.clad laminated sheet for printed circuits: epoxide cellulose paper

Shandong Provincial Standard of the People's Republic of China, Fiber Electric Furnace

DB37/ 2441-2013 Electricity consumption limit per unit product of ceramic (aluminum silicate) fiber cotton

Professional Standard - Aerospace, Fiber Electric Furnace

QJ 3074-1998 Carbon fiber and its composite material resistivity test method

SAE - SAE International, Fiber Electric Furnace

SAE AMS3813/1B-2016 Rope@ Aramid Fiber@ Jacketed Cabled Strand@ Extruded Jacket

RO-ASRO, Fiber Electric Furnace

STAS 1205-1983 Cotton and polyester technical fabrics RIBBON FOR ELECTROTECHNICAL PURPOSES
STAS 10930-1977 WOOL TOPS Determination of fibre length distribution parameters (Electronic method)

(U.S.) Ford Automotive Standards, Fiber Electric Furnace

FORD WSB-M11P27-B-2000 ADHESION REQUIREMENT, ADHESIVE FOR BONDING FRP/FRP AND FRP/PAINTED METAL PARTS ASSEMBLED AFTER VEHICLE ELECTROCOAT
FORD ESB-M6J106-C1-1993 PRIMER SURFACER, CONDUCTIVE HIGH GLOSS, FIBER REINFORCED POLYESTER PLASTICS

Society of Automotive Engineers (SAE), Fiber Electric Furnace

SAE AIR5464-2008 Metal Clad Fibers for Electrical Shielding & Harness Overbraid
SAE AMS3813/1A-1987 Rope, Aramid Fiber, Jacketed Cabled Strand, Extruded Jacket

PL-PKN, Fiber Electric Furnace

PN T90201-1974 Low-frequency telecommunication wires for fixed wiring E?uipment wires with fibrous insulation
PN-EN IEC 60667-2-2021-02 E Vulcanized fibre for electrical purposes. Part 2: Methods of test (IEC 60667-2:2020)
PN T90264-1990 General purpose telecommunication cables for movable connections Tinsel córci with fibrous insulation for selectors
PN T90201-1991 General purpose telecommunication wires for fixed wiring. Equipment wires with fibrous insulation
PN P80015-1989 Textiles raw materialsPolyacrylonitrile cable Anilana

Indonesia Standards, Fiber Electric Furnace

SNI 04-6624.2-2002 Specification for cellulosic papers for electrical purposes - Part 2: Test methods

Lithuanian Standards Office , Fiber Electric Furnace

LST EN 60554-2-2003 Cellulosic papers for electrical purposes. Part 2: Methods of test (IEC 60554-2:2001)
LST EN 60819-2-2002 Non-cellulosic papers for electrical purposes. Part 2: Methods of test (IEC 60819-2:2001)

TIA - Telecommunications Industry Association, Fiber Electric Furnace

EIA-455-17A-1988 FOTP-17 Maintenance Aging of Fiber Optic Connectors and Terminated Cable Assemblies

European Committee for Standardization (CEN), Fiber Electric Furnace

EN 3745-202:2005 Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions

CEN - European Committee for Standardization, Fiber Electric Furnace

EN 3745-202:2018 Aerospace series - Fibres and cables@ optical@ aircraft use - Test methods - Part 202: Fibre dimensions

Standard Association of Australia （SAA）, Fiber Electric Furnace

AS 3158:2004 Electric cables - Glass fibre insulated - For working voltages up to and including 0.6/1 (1.2) kV

GM Global, Fiber Electric Furnace

GMW 16797-2012 Polyphthalamide ?25% Glass Fiber/Carbon Fiber Reinforced, Impact Modified, Fuel Compatible, Electrostatically Dissipative, Heat Stabilized, Hot Oil Moldable Issue 1; English

National Electrical Manufacturers Association（NEMA), Fiber Electric Furnace

NEMA C136.20-2008 Roadway and Area Lighting Equipment?Fiber-Reinforced Composite (FRC) Lighting Poles

Professional Standard - Aviation, Fiber Electric Furnace

HB 6768-1993 Antistatic polyurethane enamel for carbon fiber composite aircraft skin

Hubei Provincial Standard of the People's Republic of China, Fiber Electric Furnace

DB42/T 1503-2019 Technical specification for melting snow and ice by carbon fiber cable heating method in road engineering

CZ-CSN, Fiber Electric Furnace

CSN 34 7010 Cast.46-1976 Breakdown voltage test of fibre an.l tape covered winding wires after thermal .inJ mechanical stressing.
CSN 80 1402 Za-1988

AR-IRAM, Fiber Electric Furnace

IRAM 2031-P.-1948