ZH
RU
ES
Efficient electrophoresis experimental device
Efficient electrophoresis experimental device, Total:75 items.
In the international standard classification, Efficient electrophoresis experimental device involves: Lamps and related equipment, Industrial furnaces, Protection against electric shock, Non-destructive testing, Electrical engineering in general, Electrical and electronic testing, Pumps, Protection against fire, Transformers. Reactors, Components for electrical equipment, Insulation, Domestic, commercial and industrial heating appliances, Occupational safety. Industrial hygiene, Radiation protection, Switchgear and controlgear, Power transmission and distribution networks, Electromechanical components for electronic and telecommunications equipment, Cereals, pulses and derived products, Electronic components in general.
Professional Standard - Machinery, Efficient electrophoresis experimental device
- JB/T 12273-2015 Cathodic electrophoretic coating film preparation experimental device technical conditions
US-FCR, Efficient electrophoresis experimental device
国家市场监督管理总局、中国国家标准化管理委员会, Efficient electrophoresis experimental device
- GB/T 32483.2-2021 Energy performance of lamp controlgear—Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps)—Method of measurement to determine the efficiency of controlgear
SE-SIS, Efficient electrophoresis experimental device
British Standards Institution (BSI), Efficient electrophoresis experimental device
- BS EN IEC 62442-2:2018 Energy performance of lamp controlgear. Controlgear for high intensity discharge lamps (excluding fluorescent lamps). Method of measurement to determine the efficiency of controlgear
- BS EN 62442-2:2014 Energy performance of lamp controlgear. Controlgear for high intensity discharge lamps (excluding fluorescent lamps) Method of measurement to determine the efficiency of the controlgear
- 20/30427823 DC BS EN IEC 62442-2. Energy performance of lamp controlgear. Part 2. Controlgear for high intensity discharge lamps (excluding fluorescent lamps). Method of measurement to determine the efficiency of controlgear
- BS EN 1151:1999 Pumps - Rotodynamic pumps - Circulation pumps having an electrical effect not exceeding 200 W for heating installations and domestic hot water installations - Requirements, testing, marking
- BS EN 61308:2006 High-frequency dielectric heating installations - Test methods for the determination of power output
- BS EN 61922:2002 High-frequency induction heating installations. Test methods for the determination of power output of the generator
- BS EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements -Part 15-6: Connector tests (mechanical) - Test 15f - Effectiveness of connector coupling devices
- PAS 67-2008 Laboratory tests to determine the heating and electrical performance of heat-led micro-cogeneration packages primarily intended for heating
dwellings
- BS EN 12094-6:2006 Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for non-electrical disable devices
- BS EN 61558-2-10:2014 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V
International Electrotechnical Commission (IEC), Efficient electrophoresis experimental device
- IEC 62442-2:2018 RLV Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
- IEC 62442-2:2014 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear
- IEC 61558-2-16:2021 Safety of transformers, reactors, power supply units and similar
products for supply voltages up to 1 100 V - Part 2-16: Particular
requirements and tests for switch mode power supply units and
transf
- IEC 61558-2-16:2009+AMD1:2013 CSV Safety of transformers, reactors, power supply units and similar
products for supply voltages up to 1 100 V - Part 2-16: Particular
requirements and tests for switch mode power supply units and
transf
- IEC 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
Association Francaise de Normalisation, Efficient electrophoresis experimental device
- NF C71-442-2:2014 Energy performance of lamp controlgear - Part 2 : controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
- NF C71-442-2*NF EN IEC 62442-2:2018 Energy performance of lamp controlgear - Part 2 : controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear
- NF C79-662*NF EN 61308:2006 High-frequency dielectric heating installations - Test methods for the determination of power output.
- NF C79-662:1997 High-frequency dielectric heating installations. Test methods for the determination of power output.
- NF EN ISO 8655-9:2022 Appareils volumétriques à piston - Partie 9 : seringues de laboratoire haute précision pour utilisation manuelle
- NF EN 61922:2003 Installations de chauffage par induction haute fréquence - Méthodes d'essai pour la détermination de la puissance de sortie du générateur
- NF C52-558-2-4*NF EN 61558-2-4:2009 Safety of transformers, reactors, power supply units and similar products for voltages up to 1 100 V - Part 2-4 : particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
- NF C52-558-2-13*NF EN 61558-2-13:2009 Safety of transformers, reactors, power supply units and similar products for voltages up to 1100 V - Part 2-13 : particular requirements and tests for auto transformers and power supply units incorporating auto transformers
- NF C93-400-15-6*NF EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6 : connector tests (mechanical) - Test 15f : effectiveness of connector coupling devices.
European Committee for Electrotechnical Standardization（CENELEC）, Efficient electrophoresis experimental device
- EN 62442-2:2014 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear
- EN 60512-15-6:2008 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices
CENELEC - European Committee for Electrotechnical Standardization, Efficient electrophoresis experimental device
- EN IEC 62442-2:2018 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear
AENOR, Efficient electrophoresis experimental device
- UNE-EN 62442-2:2014/A11:2017 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear
- UNE-EN 62442-2:2014 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear
- UNE-EN 61558-2-16:2010 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V -- Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
- UNE-EN 61922:2003 High-frequency induction heating installations - Test methods for the determination of power output of the generator
- UNE-EN 61558-2-4:2010 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V -- Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers
- UNE-EN 61558-2-13:2010 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V -- Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
- UNE-EN 61558-2-6:2010 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V -- Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Efficient electrophoresis experimental device
- GB/T 10066.9-2008 Test methods for electroheat installations.Part 9:The determination of power output for high-frequency dielectric heating installation
- GB/T 10066.31-2007 Test methods for electroheat installations.Part 31: High-frequency induction heating installation.Test methods for the determination of power output of the generator
- GB/T 5169.40-2015 Fire hazard testing for electric and electronic products.Part 40:Toxicity of fire effluent.Estimation of toxic potency.Apparatus and test method
AT-OVE/ON, Efficient electrophoresis experimental device
- OVE E 8101-7-7N54-2020 Low-voltage electrical installations - Part 7N54 - Power supply of stationary experiment stands in classrooms
ES-AENOR, Efficient electrophoresis experimental device
American Society for Testing and Materials (ASTM), Efficient electrophoresis experimental device
- ASTM E801-91(1995) Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices
- ASTM E801-01 Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices
- ASTM E801-06 Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices
- ASTM F1467-99(2005)e1 Standard Guide for Use of an X-Ray Tester ([approximate]10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
YU-JUS, Efficient electrophoresis experimental device
- JUS N.R4.485-1990 Electromechanical components for electronic equipment. Test methods. Test 15f: Effectiveness of conector couoiino devices
IEC - International Electrotechnical Commission, Efficient electrophoresis experimental device
- IEC 62442-2:2018 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear (Edition 2.0)
RU-GOST R, Efficient electrophoresis experimental device
- GOST 17512-1982 Electric equipment and installations for 3 kV and higher. Measuring methods during high - voltage tests
- GOST R 55193-2012 Electric equipment and installations for 3 kV and higher. Measuring methodsduring high - voltage tests
- GOST 1516.2-1987 Electrical equipment and installations for a. c. voltages 3 kV and higher. General methods of dielectric tests
Danish Standards Foundation, Efficient electrophoresis experimental device
- DS/EN 61308:2006 High-frequency dielectric heating installations - Test methods for the determination of power output
- DS/EN 61922:2003 High-frequency induction heating installations - Test methods for the determination of power output of the generator
German Institute for Standardization, Efficient electrophoresis experimental device
- DIN 50934-4:2000-04 Corrosion of metals - Methods for evaluation of efficiency of water treatment apparatus for corrosion protection - Part 4: Laboratory corrosion test for removal of corrosion products in incrusted water installations
- DIN EN 62442-2:2015 Energy performance of lamp controlgear - Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of the controlgear (IEC 62442-2:2014); German version EN 62442-2:2014
- DIN EN 60512-15-6:2009 Connectors for electronic equipment - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling devices (IEC 60512-15-6:2008); German version EN 60512-15-6:2008
GB-REG, Efficient electrophoresis experimental device
- REG NASA-LLIS-2046-2009 Lessons Learned ?Limitations of Internal Protective Devices in High-Voltage/High- Capacity Batteries Using Lithium-Io
HU-MSZT, Efficient electrophoresis experimental device
American National Standards Institute （ANSI), Efficient electrophoresis experimental device
- ANSI/SCTE 48-1-2007 Test Method for Measuring Shielding Effectiveness of Passive and Active Devices Using a GTEM Cell
Institute of Electrical and Electronics Engineers (IEEE), Efficient electrophoresis experimental device
- IEEE Std 2831-2023 IEEE Recommended Practice for Distributed Traveling Wave Fault Location Devices for High-Voltage Direct-Current (HVDC) Transmission Lines
ES-UNE, Efficient electrophoresis experimental device
- IEEE 2831-2023 IEEE Recommended Practice for Distributed Traveling Wave Fault Location Devices for High-Voltage Direct-Current (HVDC) Transmission Lines
Korean Agency for Technology and Standards (KATS), Efficient electrophoresis experimental device
- KS C IEC 61922-2006(2016) High-frequency induction heating installations－Test methods for the determination of power output of the generator
- KS C IEC 61922-2006(2021) High-frequency induction heating installations－Test methods for the determination of power output of the generator
- KS C IEC 61558-2-16:2014 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V — Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units
- KS C IEC 61325:2003 Insulators for overhead lines with a nominal voltage above 1 000 V－Ceramic or glass insulator units for d.c. systems－Definitions, test methods and acceptance criteria
National Electrical Manufacturers Association（NEMA), Efficient electrophoresis experimental device
- NEMA ICS 5, ANNEX F-2002 Industrial Control and Systems: High Pressure Power Wash Test Procedure for Self-Contained Control-Circuit Devices Annex F-2002
Group Standards of the People's Republic of China, Efficient electrophoresis experimental device
- T/CARSA 1.2-2022 Authenticity test of high-resolution satellite remote sensing products based on low-altitude drones Part 2: Equipment configuration requirements
Lithuanian Standards Office , Efficient electrophoresis experimental device
- LST EN 61922-2003 High-frequency induction heating installations. Test methods for the determination of power output of the generator (IEC 61922:2002)
- LST EN 61558-2-13-2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V -- Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers (IEC 61558-2-13:2009)
ZA-SANS, Efficient electrophoresis experimental device
- SANS 61467:2009 Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
Standard Association of Australia （SAA）, Efficient electrophoresis experimental device
- AS 2981:2008 High voltage a.c. switchgear and controlgear - Vacuum interrupters - High voltage testing - Protection of personnel from x-ray emission
CZ-CSN, Efficient electrophoresis experimental device
- CSN 46 1085-1-1998 Wheat (Triticum aestivum L.) and barley (Hordeum vulgare L.) - Determination of varietal trueness and purity - Part 1: Protein starch gel electrophoresis (SGE)
Japanese Industrial Standards Committee (JISC), Efficient electrophoresis experimental device
- JIS C 5402-15-6:2014 Connectors for electronic equipment.Tests and measurements.Part 15-6: Connector tests (mechanical tests).Test 15f: Effectiveness of connector coupling devices