In the international standard classification, PC 3 involves: Applications of information technology, Insulating materials.
VDE - VDE Verlag GmbH@ Berlin@ Germany, PC 3
VDE 0345-3-3-1999 Bestimmung fuer Isolierfolien fuer elektrotechnische Zwecke - Teil 3: Bestimmungen fuer einzelne Materialien; Blatt 3: Anforderungen an Polycarbonat-(PC)-Folien zur elektrischen Isolierung (IEC 60674-3-3:1992); Deutsche Fassung EN 60674-3-3:1998
VDE 0885-300-3-39-2012 Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Pruef- und Messverfahren - Teil 3-39: Untersuchungen und Messungen - Auswahl des Referenzsteckverbinders fuer Lichtwellenleiter-Steckverbinder mit physikalischem Kontakt (PC) fuer
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., PC 3
IEEE PC62.59/D3-2018 Draft Standard for Test Methods and Preferred Values for Silicon PN-Junction Clamping Diodes
IEEE PC62.69A/D3-2017 Draft Standard for the surge parameters of isolating transformers used in networking devices and equipment and Equipment Amendment 1: Addition of 4.5@ Saturated Core Secondary Winding Parameters
IEEE PC57.127/D3-2017 Draft Guide for Detection@ Location and Interpretation of Sources of Acoustic Emissions from Electrical Discharges in Power Transformers and Power Reactors
IEEE PC37.20.2A/D3-2019 Draft Standard for Metal-Clad Switchgear Amemdment 1: Control and Secondary Circuits and Devices@ and All Wiring
IEEE PC37.20.1A/D3-2019 Draft Standard for Metal-Enclosed Low-Voltage (1000Vac and below@ 3200Vdc and below) Power Circuit Breaker Switchgear Amendment 1: Control and Secondary Circuits and Devices@ and All Wiring
IEEE PC37.21A/D3-2019 Draft Standard for Control Switchboards Amendment 1 Control and Secondary Circuits and Devices@ and All Wiring
IEEE PC62.42.6/D3-2018 Draft Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports - Part 6 High Frequency Signal Isolation Transformers
IEEE PC37.100.5/D3-2016 Standard for Definitions ofHigh Voltage Circuit Breakers Above 1000 Vac and 3200 Vdc@ and Reclosers and Other Distribution Equipment from 1000 Vac to 38@000 Vac
IEEE PC37.41/D3 CORR 1-2017 Draft Standard Design Tests for High-Voltage (>1000 V) Fuses and accessories Corrigenda 1
Institute of Electrical and Electronics Engineers (IEEE), PC 3
IEEE Std PC37.013a/D3 Unapproved Draft IEEE Standard for AC High Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis Amendment 1: Supplement for Use With Generators Rated 10-100 Mva
IEEE Std PC57.12.01/D3 Unapproved IEEE Draft Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those With Solid-Cast And/Or Resin Encapsulated Windings (Revision of C57.12.01-1998) Replaced by the Approved IEEE Draft 6
IEEE Std PC57.146/D3 Unapproved IEEE Draft Guide for the Interpretation of Gases Generated in Silicone-Immersed Transformers (Superseded by Pc57.146/D3A)
IEEE Std PC57.13.6/D3 Approved IEEE Draft Standard for High Accuracy Instrument Transformer (Superseded by C57.13.6-2005)
IEEE Std PC37.016/D3 Unapproved New Draft IEEE Standard for AC High-Voltage Circuit Switchers Rated 15 kV Through 245 kV (Superseded by C37.016_D5)
PC37.100.5/D3 February 2016 IEEE Draft Standard for Definitions of High Voltage Circuit Breakers Above 1000 Vac and 3200 Vdc, and Reclosers and Other Distribution Equipment from 1000 Vac to 38,000 Vac
PC62.42.6/D3, April 2018 IEEE Approved Draft Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports - Part 6 High Frequency Signal Isolation Transformers
IEEE Std PC57.146/D3a Approved IEEE Draft Guide for the Interpretation of Gases Generated in Silicone-Immersed Transformers (Superseded by C57.146-2005)
IEEE PC62.59/D3, September 2018 IEEE Draft Standard for Test Methods and Preferred Values for Silicon PN-Junction Clamping Diodes
IEEE PC37.110/D3, January 2019 IEEE Draft Guide for the Application of Current Transformers Used for Protective Relaying Purposes
IEEE Std PC62.11/D3C Approved Draft IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (>1 kV) (Revision of IEEE C62.11-1999) Superseded by C62.11-1999
IEEE PC62.69/D3, September 2013 IEEE Draft Standard for the Surge Parameters of Isolating Transformers Used in Networking Devices and Equipment
IEEE PC37.242/D3, September 2020 IEEE Draft Guide for Synchronization, Calibration, Testing, and Installation of Phasor Measurement Units (PMUs) for Power System Protection and Control
IEEE PC37.75/D3, March 2023 IEEE Draft Standard for Pad-Mounted, Pole-Mounted and Submersible Switchgear Enclosures and Associated Control Enclosures - Coastal and Non-Coastal Environmental Integrity
IEEE PC62.39/D3, September 2012 IEEE Draft Test Methods for Self-Restoring Current Limiter Components used in Telecommunication Surge Protectors
IEEE PC37.94/D3, August 2016 IEEE Draft Standard for N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and Multiplexer Equipment
IEEE PC57.127/D3, October 2017 IEEE Draft Guide for the Detection, Location and Interpretation of Sources of Acoustic Emissions from Electrical Discharges in Power Transformers and Power Reactors
IEEE PC57.106/D3, June 2015 IEEE Draft Guide for Acceptance and Maintenance of Insulating Mineral Oil in Electrical Equipment
IEEE PC62.92.5/D3, August 2019 IEEE Draft Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V-Transmission Systems and Subtransmission Systems
IEEE PC37.26/D3, June 2014 IEEE Guide for Methods of Power-Factor Measurement for Low-Voltage (1000 V AC or lower) Inductive Test Circuits
IEEE PC37.98/D3, January 2023 IEEE Draft Approved Standard for Seismic Qualification Testing of Protective Relays and Auxiliaries for Nuclear Facilities
IEEE PC37.30.6/D3, October 2022 IEEE Draft Guide for Electric Motor Operators Applied to High-Voltage Air Switches Rated Above 1000 V
IEEE PC57.12.70/D3, January 2020 IEEE Draft Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers
IEEE PC37.06.1/D3, July 2016 IEEE Draft Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
IEEE PC95.3/D3, December 2020 IEEE Draft Recommended Practice for Measurements and Computations of Electric, Magnetic and Electromagnetic Fields With Respect to Human Exposure to Such Fields, 0 Hz-300 GHz
IEEE PC62.42.6/D3, April 2018 IEEE Approved Draft Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports - Part 6 High Frequency Signal Isolation Transformers
IEEE PC62.42.3/D3, December 2016 IEEE Approved Draft Guide for the Application of Surge-Protective Components in Surge Protective Devices and Equipment Ports - Part 3 Silicon PN-Junction Clamping Diodes
IEEE PC62.62/D3, November 2017 IEEE Approved Draft Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low-Voltage (1000 V and Less) AC Power Circuits
IEEE PC37.63/D3, August 2012 IEEE Draft Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
IEEE PC62.69a/D3, January 2017 IEEE Approved Draft Standard for the Surge Parameters of Isolating Transformers used in Networking Devices and Equipment Amendment 1: Addition of 4.5, Saturated Core Secondary Winding Parameters
IEEE PC57.100/D3, April 2010 IEEE Draft Standard Test Procedure for Thermal Evaluation of Insulation Systems for Liquid-Immersed Distribution and Power Transformers
IEEE PC62.92.3/D3, November 2011 IEEE Draft Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III--Generator Auxiliary Systems
IEEE PC37.123/D3, August 2023 IEEE Draft Guide for Specifications for High-Voltage Gas-Insulated Substations Rated Above 52 kV
IEEE PC37.63/D3, February 2023 IEEE Draft Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
IEEE PC37.20.1a/D3, May 2019 IEEE Draft Standard for Metal-Enclosed Low-Voltage (1000Vac and below, 3200Vdc and below) Power Circuit Breaker Switchgear Amendment 1: Control and Secondary Circuits and Devices, and All Wiring
IEEE PC37.112/D3, July 2018 IEEE Approved Draft Standard Inverse-Time Characteristic Equations for Overcurrent Relays
IEEE PC62.23/D3, July 2016 IEEE Draft Application Guide for Surge Protection of Electric Generating Plants
IEEE PC57.149/D3, March 2023 IEEE Draft Guide for the Application and Interpretation of Frequency Response Analysis for Oil-Immersed Transformers
IEEE PC57.107/D3, July 2023 IEEE Draft Recommended Practice for Developing Short-Term Over excitation V/Hz Curves for Transformers Directly Connected to Generators
IEEE Unapproved Draft Std PC62.21_D3, Sep07 IEEE Draft Guide for the Application of Surge Voltage Protective Equipment on Ac Rotating Machinery 1000 Volts and Greater Corrigendum 1: Replace Table 2 and Annex A.1 and A.2|Surge Protective Devices
IEEE Std PC37.20.1b/D3 Unapproved IEEE Draft Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear---Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear (Amendment to C37.20.1-2002)
IEEE PC57.12.31_Cor1/D3 IEEE Draft Standard for Pole-Mounted Equipment - Enclosure Integrity - Corrigendum 1: Correction to the SCAB Corrosion Test in Section 4.5.6
IEEE Unapproved Draft Std PC37.13.1a/D3. Nov 2009 IEEE Draft Amendment Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment: Revise Short-Circuit Rating and Test Requirement
IEEE Unapproved Draft Std PC37.13.1a /D3, Nov 2009 IEEE Draft Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment: Revise Short-Circuit Rating and Test Requirement
IEEE Unapproved Draft Std PC62.62/D3, Apr 2009 IEEE Draft Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low Voltage (1000 V and less) AC Power Circuits
IEEE Unapproved Draft Std PC57.12.60/D3, Apr 2009 IEEE Draft Standard Test Procedure for Thermal Evaluation of Insulation Systems for Dry Type Power and Distribution Transformers, Including Open-Wound, Solid-Cast and Resin Encapsulated Transformers
LST EN 60674-3-3-2001 Specification for plastic films for electrical purposes. Part 3: Specifications for individual materials. Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation (IEC 60674-3-3:1992)
IPC - Association Connecting Electronics Industries, PC 3
IPC 7711A/7721A SPANISH-2003 Retrabajo de Ensambles Electrónicos IPC-7711@ Cambio 1 - Febrero 2002 IPC-7711 - Febrero 1998 Reparación y Modificación de Circuitos Impresos y Ensambles Electrónicos IPC-7721@ Cambio 2 - Abril 2001 IPC-7721@ Cambio 1 - Marzo 2000 IPC-7721 - Febrero 1998
Korean Agency for Technology and Standards (KATS), PC 3
KS C IEC 60674-3-3:2014 Specification for plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheet 3: Requirements for polycarbonate(PC) films used for electrical insulation
Association Francaise de Normalisation, PC 3
NF C93-919-3-2*NF EN 61755-3-2:2009 Fibre optic connector optical interfaces - Part 3-2 : optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres