ZH
RU
ES

Low Density PE High Density PE

Low Density PE High Density PE, Total:112 items.

In the international standard classification, Low Density PE High Density PE involves: Rubber and plastics products, Pipeline components and pipelines, Plastics, Adhesives, Electrical accessories, Components and accessories for telecommunications equipment, Installations in buildings, Welding, brazing and soldering, Packaging materials and accessories, Textile fibres, Iron and steel products.


PL-PKN, Low Density PE High Density PE

German Institute for Standardization, Low Density PE High Density PE

  • DIN 16972:1995 Compression moulded plates made of polyethylene high density (PE-UHMW), (PE-HMW), (PE-HD) - Technical specifications
  • DIN 16895:1996 Crosslinked medium density polyethylene (PE-MDX) pipes - Dimensions
  • DIN 16895:2011-04 Crosslinked medium density polyethylene (PE-MDX) pipes - Dimensions
  • DIN V 4279-7:1994 Internal pressure test of pressure pipelines for water - Pressure pipes of low-density polyethylene PE-LD, pressure pipes of high density polyethylene PE-HD (PE 80 and PE 100), pressure pipes of cross-linked polyethylene PE-X and pressure pipes of unplast
  • DIN 16895:2011 Crosslinked medium density polyethylene (PE-MDX) pipes - Dimensions
  • DIN 16874:2018 Pipes of high-density polyethylene (PE-HD) for buried telecommunication - Dimensions and technical delivery conditions
  • DIN 16874:2012 Pipes of high-density polyethylene (PE-HD) for buried telecommunication - Dimensions and technical delivery conditions
  • DIN 16874:2018-09 Pipes of high-density polyethylene (PE-HD) for buried telecommunication - Dimensions and technical delivery conditions
  • DIN 55530:2011-05 Films for packaging - Barrier materials made of low density polyethylene (PE-LD) films and recyclates
  • DIN 16894:2011 Pipes of crosslinked medium density polyethylene (PE-MDX) - General quality requirements and testing
  • DIN 16876:2000 Pipes and fittings of high-density polyethylene (PE-HD) for buried ducting - Dimensions and technical delivery conditions
  • DIN 16894:1997 Pipes of crosslinked medium density polyethylene (PE-MDX) - General quality requirements and testing
  • DIN 16894:2011-04 Pipes of crosslinked medium density polyethylene (PE-MDX) - General quality requirements and testing
  • DIN 55530:2011 Films for packaging - Barrier materials made of low density polyethylene (PE-LD) films and recyclates
  • DIN EN ISO 15527:2013 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2010); German version EN ISO 15527:2013
  • DIN 16876:2010 Pipes and fittings of high-density polyethylene (PE-HD) for buried cable ducting - Dimensions and technical delivery conditions
  • DIN 16876:2016 Pipes and fittings of high-density polyethylene (PE-HD) for buried cable ducting - Dimensions and technical delivery condition
  • DIN 16874:2000 Pipes and fittings of high-density polyethylene (PE-HD) for cable ducting - Dimensions and technical delivery conditions
  • DIN 16876:2016-12 Pipes and fittings of high-density polyethylene (PE-HD) for buried cable ducting - Dimensions and technical delivery condition
  • DIN 16842:2013 Polyethylene (PE) pipes - PE-HD for pressureless applications - General quality requirements, dimensions and testing; Text in German and English
  • DIN 53383-2:1983 Testing of plastics; testing of oxidation stability by means of ageing in an oven; polyethylene of high density (PE-HD), infra red spectroscopic (IR) determination of the carbonyle content

American National Standards Institute （ANSI), Low Density PE High Density PE

国家市场监督管理总局、中国国家标准化管理委员会, Low Density PE High Density PE

  • GB/T 40169-2021 Compression-moulded plates of ultra-high-molecular-weight polyethylene（PE-UHMW）and high density polyethylene (PE-HD)

American Society for Testing and Materials (ASTM), Low Density PE High Density PE

  • ASTM F2619/F2619M-19 Standard Specification for High-Density Polyethylene (PE) Line Pipe
  • ASTM F2619/F2619M-11 Standard Specification for High-Density Polyethylene (PE) Line Pipe
  • ASTM F2619/F2619M-20 Standard Specification for High-Density Polyethylene (PE) Line Pipe
  • ASTM F2619/F2619M-07 Standard Specification for High-Density Polyethylene (PE) Line Pipe
  • ASTM F2619/F2619M-13 Standard Specification for High-Density Polyethylene 40;PE41; Line Pipe
  • ASTM F3202-19 Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping
  • ASTM F3202-19a Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping

GM North America, Low Density PE High Density PE

  • GM GMP.PE.021-2003 Polyethylene (PE) High Density, Conductive, Blow Moldable, ASTM Tests
  • GMP.PE.003-2011 Polyethylene ?High Density, Extrusion Grade, Copolymer Issue 3; Do Not Use on New Programs; Replaced by GMW16426 ?GMW16426P-PE-T2
  • GMP.PE.060-2011 Polyethylene ?High Density, Stress Crack Resistant, Blow Molding Issue 3; Do Not Use on New Programs; Replaced by GMW16426 - GMW16426P-PE-T1
  • GM 9984237-1988 Sealer - High Strength, Low Bake, Paintable and Pumpable
  • GM GMP.PE.003-2011 Polyethylene - High Density, Extrusion Grade, Copolymer (Issue 3; Do Not Use on New Programs; Replaced by GMW16426 - GMW16426P-PE-T2)
  • GM GMP.PE.060-2011 Polyethylene - High Density, Stress Crack Resistant, Blow Molding (Issue 3; Do Not Use on New Programs; Replaced by GMW16426 - GMW16426P-PE-T1)
  • GM GMP.PE.004-2011 Polyethylene - High Density, Copolymer, Blow Molding/Extrusion Grade, Pellet Form (Issue 2; Do Not Use on New Programs; Replaced by GMW16426 - GMW16426P-PE-T2)
  • GMP.PE.004-2011 Polyethylene ?High Density, Copolymer, Blow Molding/Extrusion Grade, Pellet Form Issue 2; Do Not Use on New Programs; Replaced by GMW16426 ?GMW16426P-PE-T2

Group Standards of the People's Republic of China, Low Density PE High Density PE

  • T/CPCIF 0060-2020 Ultra-high molecular weight polyethylene (PE-UHMW) and high-density polyethylene (PE-HD) for wet process lithium ion battery separator
  • T/GDC 242-2023 Modified High Density Polyethylene (Ds PE) Double Order Peak Enhancement Tube
  • T/GD1AIA 004-2022 Silicone adhesive sealant with high strength and low density
  • T/ZZB 1957-2020 Low line density ultra-high molecular weight polyethylene filament yarns

(U.S.) Ford Automotive Standards, Low Density PE High Density PE

  • FORD WSL-M98D29-A-2010 COMPOSITE, FUEL TANK HIGH DENSITY POLYETHYLENE (PE-HD), LINEAR LOW DENSITY POLYETHYLENE (PE-LLD) TIE LAYERS, ETHYLENE VINYL ALCOHOL (E/VAL) BARRIER ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D800-A-2010 POLYETHYLENE (PE), HIGH DENSITY, HIGH MELT FLOW RATE, LOW IMPACT MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D695-A-2010 POLYETHYLENE (PE), MOLDING COMPOUND, HIGH DENSITY, LOW MELT FLOW RATE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D645-A-2009 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D659-A-2013 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND, RECYCLED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D659-A-2014 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND, RECYCLED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D645-B1-2013 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND, MONOWALL FUEL TANK *** TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D645-B1-2015 POLYETHYLENE (PE) HIGH DENSITY MOLDING COMPOUND, MONOWALL FUEL TANK *** TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WRS-M4D145-B2-2014 POLYETHYLENE (PE), MOLDING COMPOUND, HIGH DENSITY, 100% PCR RESIN, INTERIOR *** TO BE USED WITH FORD WSS - M99P1111 - A***
  • FORD WSG-M4D901-A1-2010 POLYETHYLENE, HIGH DENSITY (PE-HD) BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D931-A1-2006 POLYETHYLENE, HIGH DENSITY (PE-HD), 25 % MICA FILLED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D721-A-2013 POLYETHYLENE (PE), MOLDING COMPOUND HIGH DENSITY, MEDIUM MELT FLOW RATE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD SK-M99G9528-B-1994 DEADENER SHEET, LOW DENSITY - HIGH TEMP. FUSIBLE
  • FORD WSB-M4D880-A-2006 POLYETHYLENE (PE), LINEAR LOW DENSITY MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D931-A1-2011 POLYETHYLENE, HIGH DENSITY (PE-HD), 25% MICA FILLED BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSK-M4D799-A-2012 POLYETHYLENE (PE), MEDIUM DENSITY, LOW MELT FLOW RATE MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D955-A-2012 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D955-B-2011 POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND, NON VISIBLE EXTERIOR / UNDERBODY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M4D197-A3-2008 POLYETHYLENE (PE), HIGH DENSITY, GASOLINE RESISTANT, BLOW MOLDING GRADE***TO BE USED WITH FORD WSS-M99P1111-A***

工业和信息化部, Low Density PE High Density PE

  • HG/T 6039-2022 Modified high-density polyethylene (PE-HD) material for plastic water floats

International Organization for Standardization (ISO), Low Density PE High Density PE

  • ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
  • ISO 4056:1978 Polyethylene (PE) pipes and fittings — Designation of polyethylene, based on nominal density and melt flow index

British Standards Institution (BSI), Low Density PE High Density PE

  • BS ISO 10146:2019 Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX). Effect of time and temperature on expected strength
  • BS EN ISO 15527:2013 Plastics. Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD). Requirements and test methods

Professional Standard - Light Industry, Low Density PE High Density PE

  • QB/T 4635-2014 Biaxially oriented polyamide (BOPA) and low density polyethylene (PE-LD) laminated film bag-in-box

CEN - European Committee for Standardization, Low Density PE High Density PE

  • EN ISO 15527:2018 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW@ PE-HD) - Requirements and test methods

European Committee for Standardization (CEN), Low Density PE High Density PE

  • EN ISO 15527:2022 Plastics - Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) - Requirements and test methods (ISO 15527:2022)
  • EN ISO 15527:2013 Plastics - Compression-moulded sheets of polyethylene (PEUHMW@ PE-HD) - Requirements and test methods
  • prEN 579-1993 Plastics piping systems; crosslinked polyethylene (PE-X) pipes; determination of degree of crosslinking by solvent extraction

NL-NEN, Low Density PE High Density PE

  • NEN 7105-1987 Plastics pipelines for floorheating - Low density polyethylene (PE-LD) pipes Requirements and test methods

Association Francaise de Normalisation, Low Density PE High Density PE

  • NF T54-046:1978 Low density polyethylene (pe-bd) pipes and fittings. Chemical resistance with respect to fluids to be conveyed.

AT-ON, Low Density PE High Density PE

  • ONORM B 5170-2001 Low density polyethylene pipes(PE 40) for water pipelines - Dimensions, requirements, tests, marking of conformity

Professional Standard - Petrochemical Industry, Low Density PE High Density PE

  • SH/T 1775-2012 Plastics.Determination of linear low density polyethylene (PE-LLD) composition.Carbon-13 nuclear magnetic resonance

Association of German Mechanical Engineers, Low Density PE High Density PE

  • DVS 2207-1-1992
  • DVS 2227-1-2000
  • DVS 2227-1-2004 Welding of semi-finished products made of high-density polyehtylene (PE-HD) for the sealing of concrete structures in the field of ground water protection and for corrosion protection

AENOR, Low Density PE High Density PE

  • UNE 53331:1997 IN PLASTICS. UNPLASTIZED POLY(VINYL CHLORIDE) AND HIGH AND MEDIUM DENSITY POLYETHYLENE (PE) PIPES. CRITERION FOR THE ASSESSMENT OF PIPES FOR PLASTICS PIPING SYSTEMS WITH CAR WITHOUT PRESSURE UNDER EXTERNAL LOADS.

CZ-CSN, Low Density PE High Density PE

  • CSN 13 8750-1971 Fittings for pipes from low and high density polyethylen (up to 10 kp/cm2)

Military Standard of the People's Republic of China-General Armament Department, Low Density PE High Density PE

  • GJB 6612-2008 Test method for aerodynamic force measurements in hypersonic low density wind tunnel
  • GJB 2986-1997 Design criteria for hypersonic low-density wind tunnel models
  • GJB 2986A-2020 Design criteria for hypersonic low-density wind tunnel test model

General Motors Corporation (GM), Low Density PE High Density PE

Society of Automotive Engineers (SAE), Low Density PE High Density PE

  • SAE AMS3310-2007 Rubber, Silicone Flame Retardant, Low Smoke Density, High Strength 65 - 75 Durometer Color White

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Low Density PE High Density PE

  • GB/T 20564.14-2023 High-strength cold-rolled steel sheets and strips for automobiles—Part 14: Low-density steels
  • GB/T 9642-1988 Polyethylene (PE) pipes and fittings--Designation of polyethylene, based on nominal density and melt flow rate

  pe low density polyethylene, Low density PE and high density PE, Low Density PE High Density PE, high density pe and low density pe, high density pe low density pe, pe low density, high density PE.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved