ZH
RU
ES
Effective part
Effective part, Total:253 items.
In the international standard classification, Effective part involves: Laundry appliances, Measurement of volume, mass, density, viscosity, Products of the textile industry, Protection against fire, Petroleum products in general, Agricultural machines, implements and equipment, Sterilization and disinfection, Pulps, Components for electrical equipment, Ergonomics, Inorganic chemicals, Non-ferrous metals, Pipeline components and pipelines, Physics. Chemistry, Industrial automation systems, Applications of information technology, Non-textile floor coverings, Aids for disabled or handicapped persons, Quantities and units, Farming and forestry, Soil quality. Pedology, Measurement of fluid flow, Electrical engineering in general, Quality, Test conditions and procedures in general, Flexible drives and transmissions, Fibre optic communications, Medical equipment, Company organization and management, Chipless working equipment, Passenger cars. Caravans and light trailers, Character sets and information coding, Protective equipment, Energy and heat transfer engineering in general, Installations in buildings, Vocabularies, Information technology (IT) in general, Optical equipment, Cutting tools, Characteristics and design of machines, apparatus, equipment, Paints and varnishes, Air quality, Aerosol containers, Non-destructive testing, Gas and steam turbines. Steam engines, Burners. Boilers, Microbiology, Wood technology processes, Road engineering, Waxes, bituminous materials and other petroleum products, IT terminal and other peripheral equipment, Character symbols, Galvanic cells and batteries, Earthworks. Excavations. Foundation construction. Underground works, Wind turbine systems and other alternative sources of energy, Pesticides and other agrochemicals, Electronic display devices, Freight distribution of goods.
Association Francaise de Normalisation, Effective part
- NF ISO 16659-1:2023 Systèmes de ventilation pour les installations nucléaires - Méthodes d'essai in-situ de l'efficacité des pièges à iode à sorbant solide - Partie 1 : exigences générales
- NF X65-031*NF ISO 13571:2012 Life-threatening components of fire - Guidelines for the estimation of time to compromised tenability in fires
- XP X41-543-3:2009 Produits de préservation du bois - Détermination de l'efficacité d'un système de pièges-appâts - Partie 3 : critères d'efficacité
- NF E29-005:1991 Industrial pipework. Pressure/temperature ratios of standardize steel components. Values and validity limitations.
- NF ISO 7176-3:2013 Fauteuils roulants - Partie 3 : détermination de l'efficacité des freins
- XP X41-543-1:2008 Produits de préservation du bois - Détermination de l'efficacité d'un système de pièges-appâts - Partie 1 : efficacité de la formulation insecticide - Méthode de laboratoire
- NF EN 13087-4:2012 Casques de protection - Méthodes d'essai - Partie 4 : efficacité du système de rétention
- NF S72-509-4*NF EN 13087-4:2012 Protective helmets - Test methods - Part 4 : retention system effectiveness
- NF S56-110-2:2008 Leisure accommodation vehicles - Caravans - Part 2 : user payload.
- NF ISO 17299-3:2014 Textiles - Détermination des propriétés de neutralisation d'odeurs - Partie 3 : méthode par chromatographie en phase gazeuse
- NF EN 17371-3:2020 Prestation de services - Partie 3 : management du mesurage des performances - Recommandations relatives au mécanisme de mesurage des performances dans le cadre des contrats de services
- NF E63-509-2:2001 Tools for moulding - Locating rings - Part 2 : locating rings for mounting with thermal insulating sheets in small or medium moulds - Types C and D.
- NF S56-111-2:2008 Leisure accommodation vehicles - Motor caravans - Part 2 : user payload.
- XP P94-060-2:1997 Sols : reconnaissance et essais - Essai de dessiccation - Partie 2 : détermination effective de la limite de retrait sur un prélèvement non remanié.
- NF EN ISO 9455-10:2012 Flux de brasage tendre - Méthodes d'essai - Partie 10 : essai d'efficacité du flux, méthode d'étalement
- NF P98-261-1:1993 Test relating to pavements. Determination of the fatigue resistance of bituminous mixtures. Part 1 : flexural fatigue test with constant displacement.
- NF Z15-021:1989 Identification cards. Integrated circuit(s) with contacts. Part 2 : dimensions and location of the contacts.
- NF E63-509-2*NF ISO 10907-2:2008 Tools for moulding - Locating rings - Part 2 : locating rings for mounting with thermal insulating sheets in small or medium moulds - (types C and D)
- NF X35-300-2*NF EN ISO 10075-2:2000 Ergonomic principles related to mental workload - Part 2 : design principles
- NF X41-543-2:2016 Produits de préservation du bois - Détermination de l'efficacité d'un système de pièges-appâts - Partie 2 : méthode de terrain
- XP CEN/TS 17784-2:2022 Engrais organo-minéraux - Identification des agents complexants - Partie 2 : méthode par chromatographie liquide à haute performance (HPLC)
- NF P06-111-1*NF EN 1991-1-1:2003 Eurocode 1 - Actions on structures - Part 1-1 : general actions - Densities, self weight, imposed loads for buildings
- NF C46-415*NF EN 61003-1:2016 Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1 : methods of evaluating performance
- NF E66-308*NF ISO 6987:2012 Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions
Taiwan Provincial Standard of the People's Republic of China, Effective part
- CNS 2925-1968 Practices for Designating Significant Places in Specificd Limiting Values
ESDU - Engineering Sciences Data Unit, Effective part
- TM 176-2014 Effective phase angle in tyre-friction modelling
- TM 176A-2015 Effective phase angle in tyre-friction modelling
- ESDU 98003-1998 Design and performance evaluation of heat exchangers: the effectiveness-NTU method. Part 1: introduction.
- ESDU 98006-1998 Design and performance evaluation of heat exchangers: the effectiveness-NTU method. Part 4: case studies.
- ESDU 98007-1998 Design and performance evaluation of heat exchangers: the effectiveness-NTU method. Part 5: analytical techniques.
GB-REG, Effective part
KR-KS, Effective part
ZA-SANS, Effective part
- SANS 6005:2005 Mass per unit area of effective pile above the substrate of textile floor coverings
- SANS 204-2:2008 Energy efficiency in buildings Part 2: The application of the energy efficiency requirements for buildings with natural environmental control
- SANS 204-3:2008 Energy efficiency in buildings Part 3: The application of the energy efficiency requirements for buildings with artificial ventilation or air conditioning
International Organization for Standardization (ISO), Effective part
- ISO/TS 13571:2002 Life-threatening components of fire - Guidelines for the estimation of time available for escape using fire data
- ISO 13571:2007 Life-threatening components of fire - Guidelines for the estimation of time available for escape using fire data
- ISO 13571:2012 Life-threatening components of fire - Guidelines for the estimation of time to compromised tenability in fires
- ISO 6677:1983 Hexafluorosilicic acid for industrial use; Determination of available fluorine content; Potentiometric method after distillation
- ISO 23774:2023 Pulps — Kraft liquor — Determination of total, active and effective alkali using potentiometric titration
- ISO/PRF TS 24217-1 Fine bubble technology — Guideline for indicating benefits — Part 1: Classification of effective functions of fine bubbles
- ISO 2095:1977 Textile floor coverings — Determination of mass of effective pile per unit area that can be shorn away from the substrate
- ISO 31-2:1992 Quantities and units; part 2: periodic and related phenomena
- ISO 31-6:1992 Quantities and units; part 6: light and related electromagnetic radiations
- ISO 31-2:1992/Amd 1:1998 Quantities and units - Part 2: Periodic and related phenomena; Amendment 1
- ISO/TR 4869-4:1998 Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs
- ISO/TS 24217-1:2023 Fine bubble technology — Guideline for indicating benefits — Part 1: Requirements for systematic classification of effective functions of fine bubbles
- ISO 6262-2:2013 End mills with indexable inserts.Part 2: End mills with Morse taper shank
- ISO 10075-2:1996 Ergonomic principles related to mental workload - Part 2: Design principles
- ISO 9711-1:1990 Freight containers; information related to containers on board vessels; part 1: bay plan system
- ISO/CD 13391-3:2011 Wood and wood-based products — Carbon balance — Part 3: Calculation of the displacementeffects including through substitution
- ISO 10907-2:2007 Tools for moulding - Locating rings - Part 2: Locating rings for mounting with thermal insulating sheets in small or medium moulds (types C and D)
- ISO 7816-2:1988 Identification cards; integrated circuit(s) cards with contacts; part 2: dimensions and location of the contacts
- ISO 6987:2012 Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole - Dimensions
- ISO 4869-2:1994 Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn
- ISO 4869-2:2018 Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn
American Society for Testing and Materials (ASTM), Effective part
- ASTM D8126-17 Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration
- ASTM D8126-21 Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration
- ASTM D6888-03 Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
- ASTM D6888-04 Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
- ASTM D6888-09 Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
- ASTM D7382-08 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
- ASTM D7382-07 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
- ASTM D3076-00 Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
- ASTM D3076-00(2005) Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
- ASTM D3076-00(2010) Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
- ASTM E2897-22 Standard Guide for Evaluation of the Effectiveness of Hand Hygiene Topical Antimicrobial Products using ex vivo Porcine Skin
- ASTM E2897-12(2017) Standard Guide for Evaluation of the Effectiveness of Hand Hygiene Topical Antimicrobial Products using ex vivo Porcine Skin
SE-SIS, Effective part
- SIS SS 83 25 16-1982 Carpets - Determination of mass of effective pile per unit area that can be shorn away from the substrate
TR-TSE, Effective part
- TS 3005-1978 CARPETS — DETERMINATION OF MASS OF EFFECTIVE PJLE PER UNIT AREA THAT CAN BE SHORN AWAY FROM THE SUBSTRATE
British Standards Institution (BSI), Effective part
- BS 6735:1987 Specification for reach volumes for the location of controls on agricultural tractors and machinery
- BS ISO 23774:2023 Pulps. Kraft liquor. Determination of total, active and effective alkali using potentiometric titration
- BS EN 61003-1:2016 Tracked Changes. Industrial-process control systems. Instruments with analogue inputs and two- or multi-position outputs. Methods for evaluating performance
- BS 7564-4:1992 Tools for moulding - Mould guide bushes, headed, and locating guide bushes, headed
- BS 1377-8:1990 Methods of test for soils for civil engineering purposes - Shear strength tests (effective stress)
Hubei Provincial Standard of the People's Republic of China, Effective part
- DB42/T 801-2012 Automatic Potentiometric Titration Method for Determination of Active Components in Chemical Disinfectants
US-CFR-file, Effective part
- CFR 26-1.274-8-2013 Internal Revenue. Part1:Income taxes(continued). Section1.274-8:Effective/applicability date.
- CFR 10-431.196-2013 Energy.Part431:Energy efficiency program for certain commercial and industrial equipment. Section431.196:Energy conservation standards and their effective dates.
- CFR 10-431.306-2013 Energy.Part431:Energy efficiency program for certain commercial and industrial equipment. Section431.306:Energy conservation standards and their effective dates.
- CFR 10-431.66-2013 Energy.Part431:Energy efficiency program for certain commercial and industrial equipment. Section431.66:Energy conservation standards and their effective dates.
- CFR 14-1230-2013 Aeronautics and space. Part1230:Protection of human subjects (eff. Until 2-14-14).
- CFR 26-1.336-5-2013 Internal Revenue. Part1:Income taxes(continued). Section1.336-5:Effective/applicability date.
- CFR 31-589.302-2014 Money and Finance: Treasury. Part589:Ukraine related sanctions regulations. Section589.302:Effective date.
- CFR 46-10.205-2013 Shipping. Part10:Merchant mariner credential. Section10.205:Validity of a merchant mariner credential.
- CFR 40-19.2-2013 Protection of environment. Part19:Adjustment of civil monetary penalties for inflation. Section19.2:Effective date.
- CFR 5-831.701-2014 Administrative personnel. Part831:Retirement. SubpartG:Computation of annuities. section831.701:Effective dates of annuities.
- CFR 10-431.25-2014 Energy. Part431:Energy efficiency program for certain commercial and industrial equipment. SubpartB:Electric Motors. Section431.25:Energy conservation standards and effective dates.
- CFR 24-92.255-2013 Housing and Urban Development. Part92:Home investment partnerships program. Section92.255:Converting rental units to homeownership units for existing tenants.
Military Standard of the People's Republic of China-General Armament Department, Effective part
- GJB 5214.12-2003 Special ammunition effect test method Part 12: Photographic method for measuring effective smoke screen width and effective smoke screen height of smoke projectiles
- GJB 8670.11-2015 Special ammunition effect test method Part 11: Photographic method for determination of effective smoke screen width and effective smoke screen height of smoke projectiles
- GJB 8706.15-2015 Special aerial bomb effect test methods Part 15: Photographic method of effective smoke screen width and effective smoke screen height on the ground of aerial smoke bombs
- GJB 8697.21-2015 Rifle grenade test methods Part 21: Number of effective fragments
- GJB 4972.1-2003 Photoelectric active interference effect assessment criteria Part 1: Laser interference
国家市场监督管理总局、中国国家标准化管理委员会, Effective part
- GB/T 36607-2018 Ergonomics—Motor vehicle driver head position
- GB/T 33779.3-2021 Guidance for special characteristic of optical fibre—Part 3: Effective area (Aeff)
Group Standards of the People's Republic of China, Effective part
- T/GERS 0019-2023 Energy efficiency standards for unit products of Non-ferrous metal smelting and rolling processing industries in Guangdong Province
- T/GERS 0008.3-2021 Guidelines for energy efficiency benchmarking of organizations in key industries Part 3 Steel industry
- T/GERS 0008.7-2021 Guidelines for energy efficiency benchmarking for organizations in key industries Part 7 Textile industry
- T/GERS 0008.6-2021 Guidelines for energy efficiency benchmarking of organizations in key industries Part 6 Paper industry
- T/GERS 0008.4-2021 Guidelines for energy efficiency benchmarking of organizations in key industries Part 4 Cement industry
- T/GERS 0008.1-2021 Guidelines for energy efficiency benchmarking of organizations in key industries Part 1 General principle
- T/GERS 0008.5-2021 Guidelines for energy efficiency benchmarking of organizations in key industries Part 5 Ceramic industry
- T/GERS 0008.2-2021 Guidelines for energy efficiency benchmarking of organizations in key industries Part 2 Petrochemical industry
- T/CEC 131.11-2020 Secondary utilization of lead-acid batteries Part 11: Technical specifications for plate failure detection - potential difference method
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Effective part
- GJB 5494.24-2005 Test method of rifle grenade Part 24:Measurement of effective smoke width and effective smoke height for smoke projectile
- GJB 6238.16-2008 Test method of effect for special aerial bomb. Part 16: Effective width and height of smoke bomb. Camera method
- GJB 6238.15-2008 Test method of effect for special aerial bomb. Part 15: Effective width and height of smoke bomb. Photo method
- GJB 5494.21-2005 Test method of rifle grenade Part 21:Test for effective fragment number
- GJB 6238.21-2008 Test method of effect for special aerial bomb. Part 21: Quartity and ignition rate for static detonation effective incendiary unit of aerial incendiary bomb
- GJB 5384.13-2005 Test methods of performance for pyrotechnic composition Part 13: Effective IR radiant efficiency Bandpass method
German Institute for Standardization, Effective part
- DIN 50989-6:2023-03 Ellipsometry - Part 6: Effective Materials model; Text in German and English / Note: Date of issue 2023-01-27
- DIN 58949-3:2004 Disinfection - Steam disinfection apparatus - Part 3: Efficiency testing
- DIN 86270-3:2016-03 Ballast water management - Requirements and tests - Part 3: Efficient control
- DIN EN 13087-4:2012-04 Protective helmets - Test methods - Part 4: Retention system effectiveness; German version EN 13087-4:2012
- DIN EN 1645-2:2008 Leisure accommodation vehicles - Caravans - Part 2: User payload; English version of DIN EN 1645-2:2008-09
- DIN 58955-3:1998 Decontamination equipment for medical use - Part 3: Efficiency testing
- DIN 1164-10:2023-02 Special cement - Part 10: Cement with low effective alkali content - Composition and requirements
- DIN 58949-4:2006 Disinfection - Steam disinfection-apparatus - Part 4: Biological indicators for efficacy tests
- DIN 58949-4:2014 Disinfection - Steam disinfection-apparatus - Part 4: Biological indicators for efficacy tests
- DIN 58141-3:1989 Testing of fibre optic elements; determination of acceptance angle of light guides
- DIN 58141-3:2012 Measurement of fiber optic elements - Part 3: Determination of acceptance angle of light guides; Text in German and English
- DIN EN 1646-2:2008 Leisure accommodation vehicles - Motor caravans - Part 2: User payload; English version of DIN EN 1646-2:2008-09
- DIN 4000-88:2005 Tabular layouts of properties - Part 88: Milling cutter with arbor hole for indexable inserts
- DIN EN ISO 4869-4:2000 Acoustics - Hearing protectors - Part 4: Measurement of effective sound pressure levels for level-dependent sound-restoration ear-muffs (ISO/TR 4869-4:1998); German version EN ISO 4869-4:2000
- DIN EN ISO 10075-2:2000 Ergonomic principles related to mental workload - Part 2: Design principles (ISO 10075-2:1996); German version EN ISO 10075-2:2000
- DIN 4754-3:2015 Heat transfer installations working with organic heat transfer fluids - Part 3: Level controller
- DIN 4754-3:2015-03 Heat transfer installations working with organic heat transfer fluids - Part 3: Level controller
- DIN 4000-126:2012-09 Tabular layouts of properties - Part 126: Reamers with non-indexable cutting edges
- DIN 58141-10:1997 Testing of fibre optic elements - Part 10: Determination of illuminance and acceptance angle of cold light sources
- DIN CEN/TS 17784-2:2022-07 Organo-mineral fertilizers - Identification of complexing agents - Part 2: Method using high-performance liquid chromatography (HPLC); German version CEN/TS 17784-2:2022
- DIN 4000-82:2020-03 Tabular layouts of properties - Part 82: End mills with non-indexable cutting edges
- PAS 1027-2004 Energy efficiency of heating and ventilation systems in existing buildings Addition of the DIN 4701-12 Blatt 1
- DIN 58141-10:2011-09 Measurement of fiber optic elements - Part 10: Determination of illuminance and effective aperture angle of cold light sources; Text in German and English
- DIN 4000-98:2012-01 Tabular layouts of properties - Part 98: Lathe tools with non-indexable cutting edges
- DIN EN ISO 10075-1:2000 Ergonomic principles related to mental work-load - Part 1: General terms and definitions (ISO 10075:1991); German version EN ISO 10075-1:2000
BELST, Effective part
- STB 2463-2020 External power supplies. Energy efficiency. Requirements for power consumption at idle and average effective efficiency. Methods of control
American Welding Society (AWS), Effective part
- WRC 243:1978 Part 1: Effective Utilization Of Yield Strength Steels In Fatigue
Danish Standards Foundation, Effective part
- DS/ISO 7176-3:2013 Wheelchairs - Part 3: Determination of effectiveness of brakes
- DS/EN 1645-2:2008 Leisure accommodation vehicles - Caravans - Part 2: User payload
- DS/EN 1646-2:2008 Leisure accommodation vehicles - Motor caravans - Part 2: User payload
- DS/EN 13087-4:2012 Protective helmets - Test methods - Part 4: Retention system effectiveness
- DS/EN 27 816-2:1992 Identification cards - Integrated circuit(s) cards with contacts - Part 2: Dimensions and location of the contacts
- DS/ISO 9711-1:1992 Freight containers. Information related to containers on board vessels. Part 1: Bay plan system
(U.S.) Ford Automotive Standards, Effective part
RU-GOST R, Effective part
- GOST R ISO 7176-3-1996 Wheelchairs. Methods of control for determination of efficiency of braking system
- GOST R ISO 7176-3-2007 Wheelchairs. Part 3. Determination of effectiveness of brake system
- GOST R ISO 7176-3-2015 Wheelchairs. Part 3. Determination of effectiveness of brakes
- GOST R 55241.2-2012 Ergonomics of human-system interaction. Part 309. Organic light-emitting diode displays
- GOST R 50571.7.701-2013 Low-voltage electrical installations. Part 7. Requirements for special installations or locations. Section 701. Location containing a bath or shower
CZ-CSN, Effective part
- CSN IEC 605-6:1992 Equipment reliability testing Part 6: Tests for the validity of a constant failure rate assumption
RO-ASRO, Effective part
- SR ISO 31-2:1995 Quantities and units - Part 2: Periodic and related phenomena
- SR ISO 31-6:1995 Quantities and units - Part 6: Light and related electromagnetic radiations
- STAS 10099-1975-1 FERROMAGNETIC OXIDE MATERIALS Calculation of the effective parameters of magnetic piece parts
- STAS 12725/1-1989 Tool with indexable inserts for inner turning HOLDERS Symbolization
- STAS 10099-1975 FEROMAGNETIC OXIDE MATERIALS Calculation of the effective parameters of magnetic piece parts
- STAS SR EN 27816-2-1995 Identification cards. Integrated circuit(s) cards with contacts. Part 2: Dimensions and location of the contacts
- STAS 12725/2-1989 Tools with indexable inserts for inner turning HOLDERSShapes and main dimensions
Korean Agency for Technology and Standards (KATS), Effective part
- KS A ISO 31-6-2001(2006) Quantities and units－Part 6：Light and related electromagnetic radiations
- KS I ISO 4869-4:2004 Acoustics-Hearing protectors-Part 4:Measurement of effective sound pressure levels forlevel-dependent sound-restoration ear-muffs
- KS B ISO 3977-9:2004 Gas turbines－Procurement－Part 9：Reliability, availability, maintainability and safety
- KS C IEC 60027-3:2009 Letter symbols to be used in electrical technology-Part 3:Logarithmic quantities and units
- KS Q ISO 3494-2001(2021) Statistical interpretation of data－Part 4：Power of tests relating to means and variances
- KS B ISO 3002-2:2013 Basic quantities in cutting and grinding－Part 2：Geometry of the active part of cutting tools－General conversion formulae to relate tool and working angles
Professional Standard - Agriculture, Effective part
- NY/T 1121.7-2014 Soil testing.Part 7:Method for determination of available phosphorus in soil
- NY/T 1121.14-2006 Soil Testing.Part 14:Method for determination of soil avalible sulphur
- NY/T 1121.8-2006 Soil Testing.Part 8:Method for determination of soil avalible boron
- NY/T 1121.9-2006 Soil Testing.Part 9:Method for determination of soil avalible molybdenum
- NY/T 1121.15-2006 Soil Testing.Part 15:Method for determination of soil avalible silicon
- NY/T 1121.9-2012 Soil testing.Part 9:Method for determination of soil available molybdenum
- NY/T 1121.9-2023 Soil Testing Part 9: Determination of Soil Available Molybdenum
- NY/T 1121.14-2023 Soil Testing Part 14: Determination of Soil Available Sulfur
- NY/T 1121.7-2006 Soil Testing.Part 7:Method for determination of avalible phosphorus in acid soil
- NY/T 1121.25-2012 Soil testing.Part 25:Method for determination of available phosphorus by continuous flow analyzer
Professional Standard - Medicine, Effective part
- YY 0290.6-1997 Intraocular Ienses.Part 6:Shelf-life and shipping testing
- YY/T 0719.6-2010 Ophthalmic optics—Contact lens care products—Part 6:Guidelines for determination of shelf-life
- YY 0719.6-2010 Ophthalmic optics.Contact lens care products.Part 6 :Guidelines for determination of shelf-life
- YY 0290.6-2009 Intraocular lenses.Part 6:Shelf-life and transport stability
- YY/T 0290.6-2009 Intraocular lenses—Part 6:Shelf-life and transport stability
International Electrotechnical Commission (IEC), Effective part
- IEC 60605-6/COR1:2000 Equipment reliability testing - Part 6: Tests for the validity of the constant failure rate or constant failure intensity assumptions
- IEC 60605-6:2007 Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity
- IEC 60605-6:1986 Equipment reliability testing. Part 6 : Tests for the validity of a constant failure rate assumption
- IEC 60027-3:2002 Letter symbols to be used in electrical technology - Part 3: Logarithmic and related quantities, and their units
- IEC TS 61400-26-1:2011 Wind turbines - Part 26-1: Time-based availability for wind turbine generating systems
Japanese Industrial Standards Committee (JISC), Effective part
- JIS Z 8202-2:2000 Quantities and units -- Part 2: Periodic and related phenomena
- JIS K 5600-2-6:1999 Testing methods for paints -- Part 2: Characteristics and stability of paints -- Section 6: Pot life
- JIS K 5600-2-6:2016 Testing methods for paints -- Part 2: Characteristics and stability of paints -- Section 6: Pot life
- JIS Z 8524:1999 Ergonomics -- Office work with visual display terminals (VDTs) -- Menu dialogues
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Effective part
- GB/T 13575.2-2008 Classical and Narrow V-belt drives.Part 2:Effective system
- GB/T 13575.2-2022 Normal and narrow V-belt drives Part 2: Effective width control
- GB/T 11417.8-2023 Ophthalmic optical contact lenses Part 8: Determination of expiry date
- GB/T 11417.8-2012 Ophthalmic optics.Contact lenses.Part 8:Determination of shelf-life
- GB/T 18340.2-2010 Organic geochemical analysis method for geological samples.Part 2:Determination of organic carbon stable isotopic component.Isotopic mass spectrometry
- GB/T 16913.2-1997 Methods of dust character test--Part 2: Determination of effective density--Pyknometer method
- GB/T 7584.2-1999 Acoustics--Hearing protectors--Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn
- GB/T 16587-1996 Fast gas chromatographic method for analyzing active ingredients of pesticides--Part 1: 12 kinds of pesticides
Professional Standard - Postal Service, Effective part
- YZ/T 0046-2001 Provisional regulations on working efficiency of postal center internal processing working position
- YZ/T 0046-2001(条文说明) Interim Regulations on Production Efficiency of Internal Processing Stations in Mail Processing Center
DE-VDA, Effective part
- VDA 4965-1-2010 Engineering Change Management (ECM) - Part 1: ECR; Version 3.0
AENOR, Effective part
- UNE 7363:1978 DETERMINATION OF FULL AND EFFECTIVE THICKNESS OF SUPERFICIALLY HARDENED THIN LAYERS OF STEELS.
- UNE-EN 1645-2:2008 Leisure accommodation vehicles - Caravans - Part 2: User payload
- UNE-EN 1646-2:2008 Leisure accommodation vehicles - Motor caravans - Part 2: User payload
- UNE-EN 50563:2012/A1:2014 External a.c. - d.c. and a.c. - a.c. power supplies – Determination of no-load power and average efficiency of active modes
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Effective part
- JEDEC JEP162-2013 System Level ESD Part II: Implementation of Effective ESD Robust Designs
European Committee for Standardization (CEN), Effective part
- EN 1645-2:2008 Leisure accommodation vehicles - Caravans - Part 2: User payload
- EN 1645-2:1998 Leisure Accommodation Vehicles - Caravans - Part 2: User Payload
- EN 13087-4:2012 Protective helmets - Test methods - Part 4: Retention system effectiveness
- EN 1646-2:2008 Leisure accommodation vehicles - Motor caravans - Part 2: User payload
- EN 583-2:2001 Non-Destructive Testing - Ultrasonic Examination - Part 2: Sensitivity and Range Setting
- EN ISO 10075-2:2000 Ergonomic principles related to mental workload Part 2: Design principles ISO 10075-2: 1996
European Committee for Electrotechnical Standardization（CENELEC）, Effective part
- EN 60598-1:2008 Luminaires - Part 1: General requirements and tests (Incorporates Amendment A11: 2009; Remains Current)
- EN 60027-3:2007 Letter symbols to be used in electrical technology Part 3: Logarithmic and related quantities, and their units
- EN 60825-4:2006 Safety of laser products Part 4: Laser guards (Incorporates Amendment A2: 2011)
Professional Standard - Public Safety Standards, Effective part
- GA/T 2000.16-2014 Information codes for public security industry.Part 16:Period of validity for resident identity card
- GA 214.8-2004 Specification for resident population management information Part 8:Valid limitation for citizen identification card
Lithuanian Standards Office , Effective part
ES-UNE, Effective part
- UNE-EN 13087-4:2012 Protective helmets - Test methods - Part 4: Retention system effectiveness (Endorsed by AENOR in November of 2012.)
- UNE-EN 61003-1:2016 Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs - Part 1: Methods for evaluating performance (Endorsed by AENOR in December of 2016.)
Compressed Gas Association (U.S.), Effective part
- CGA M-15-2014 Standard for appropriate and effective regulations for medical gases within 21 CFR parts 201,205,and 210/211
- CGA PS-42-2014 Appropriate and effective regulations for medical gased within 21 CFR parts 201,205,and 210/211
National Fire Protection Association (NFPA), Effective part
- NFPA 1975-2009 Standard on Station/Work Uniforms for Emergency Services Effective Date: 12/29/2008
AT-ON, Effective part
- ONORM A 5440-1987 Packaging; unit packs with hanging device for small parts; dimensions, requirements
VN-TCVN, Effective part
- TCVN 6553-4-1999 Explosion protection systems.Part 4.Method for determination of efficacy of explosion suppression systems
- TCVN 7113-2-2002 Ergonomics.Principles related to mental workload.Part 2: Design principle
Professional Standard - Traffic, Effective part
- JT/T 765.4-2016 Developing standard for electronic navigational chart of the Changjiang River.Part 4:Validation checks
- JT/T 765.4-2009 Developing standard for digital hydrographic chart of the Changjiang River.Part 4:Validation checks
PT-IPQ, Effective part
- NP 3003-14-2001 Information technology Vocabulary Part 14: Reliability, maintainability and availability
CEN - European Committee for Standardization, Effective part
- EN 1646-2:1998 Leisure Accommodation Vehicles - Motor Caravans - Part 2: User Payload
- EN ISO 10075-1:2017 Ergonomic principles related to mental workload - Part 1: General issues and concepts@ terms and definitions
国家药监局, Effective part
- YY/T 0719.6-2020 Ophthalmic optics—Contact lens care products—Part 6:Guidelines for determination of shelf-life
- YY/T 0290.6-2021 Ophthalmic Optical Intraocular Lenses Part 6: Expiration Date and Shipping Stability
Shanxi Provincial Standard of the People's Republic of China, Effective part
- DB14/T 1981-2020 Internal quality control reference material control method for the validity of test results
ETSI - European Telecommunications Standards Institute, Effective part
- TR 103 305-3-2018 CYBER; Critical Security Controls for Effective Cyber Defence; Part 3: Service Sector Implementations (V2.1.1)
- TR 103 305-3-2016 CYBER; Critical Security Controls for Effective Cyber Defence; Part 3: Service Sector Implementations (V1.1.1)
- TR 103 305-4-2018 CYBER; Critical Security Controls for Effective Cyber Defence; Part 4: Facilitation Mechanisms (V2.1.1)
- TR 103 305-4-2016 CYBER; Critical Security Controls for Effective Cyber Defence; Part 4: Facilitation Mechanisms (V1.1.1)
- TR 103 305-5-2018 CYBER; Critical Security Controls for Effective Cyber Defence; Part 5: Privacy enhancement (V1.1.1)
- TR 103 305-2-2016 CYBER; Critical Security Controls for Effective Cyber Defence; Part 2: Measurement and auditing (V1.1.1)
- TR 103 305-2-2018 CYBER; Critical Security Controls for Effective Cyber Defence; Part 2: Measurement and auditing (V2.1.1)
- TR 103 305-1-2018 CYBER; Critical Security Controls for Effective Cyber Defence; Part 1: The Critical Security Controls (V3.1.1)
- TR 103 305-1-2016 CYBER; Critical Security Controls for Effective Cyber Defence; Part 1: The Critical Security Controls (V2.1.1)
International Telecommunication Union (ITU), Effective part
- ITU-R M.1372-1 SPANISH-2003 Efficient use of the radio spectrum by radar stations in the radiodetermination service Questions ITU-R 35/8 and ITU-R 216/8
- ITU-R M.1372-1 FRENCH-2003 Efficient use of the radio spectrum by radar stations in the radiodetermination service
JP-JARI, Effective part
- JRIS E 4117-2-2005 Rolling stock-levelling valves Part2: with throttled air flow around neutral position
Canadian Standards Association (CSA), Effective part
- CSA Z314.3-01-2001 Sterilisation Effective A La Vapeur Dans Les Etablissements De Sante Quatrieme Edition; Fiche No 1; Mise A Jour No 2
未注明发布机构, Effective part
- BS 1377-8:1990(1999) Methods of test for Soils for civil engineering purposes — Part 8 : Shear strength tests (effective stress)
IN-BIS, Effective part