ZH
RU
ES
metal carbene
metal carbene, Total:168 items.
In the international standard classification, metal carbene involves: Organic chemicals, Capacitors, Ferroalloys, Aerospace fluid systems and components, Iron and steel products, Surface treatment and coating, Reinforced plastics, Products of the chemical industry, Air quality, Non-ferrous metals, Analytical chemistry, Testing of metals, Standardization. General rules, Construction industry, Construction materials, Pipeline components and pipelines, Cans. Tins. Tubes, Powder metallurgy, Bottles. Pots. Jars, Environmental protection, Chipless working equipment, Welding, brazing and soldering, Electrical wires and cables, Products of non-ferrous metals, Rubber and plastics products, Adhesives, Horology, Materials for the reinforcement of composites, Protection of and in buildings, Products of the textile industry, Paints and varnishes, Printed circuits and boards, Insulating materials, Aircraft and space vehicles in general.
Professional Standard - Petrochemical Industry, metal carbene
- SH/T 1835-2022 Determination of metal content of low carbon α-olefins by inductively coupled plasma emission spectrometry
Korean Agency for Technology and Standards (KATS), metal carbene
- KS C IEC 60384-61:2008 Fixed capacitors for use in electronic equipment-Part 6:Blank detail specification:Fixed metallized polycarbonate film dielectric d.c. capacitors-Assessment level E
- KS C IEC 60384-61:2013 Fixed capacitors for use in electronic equipment－Part 6：Blank detail specification：Fixed metallized polycarbonate film dielectric d.c. capacitors－Assessment level E
- KS D ISO 9717:2009 Phosphate conversion coatings for metals-Method of specifying requirements
- KS D ISO 9717:2013 Phosphate conversion coatings for metals-Method of specifying requirements
- KS M 3343-2011 Polyvinyl chloride-metal laminated sheets
- KS M 3343-2016 Polyvinyl chloride-metal laminated sheets
- KS M 3343-2016(2021) Polyvinyl chloride-metal laminated sheets
- KS M 3343-1986 Polyvinyl chloride-metal laminated sheets
- KS D 1780-1993 General rules for determination of carbon in metallic materials
- KS D 1780-2016 General rules for determination of carbon in metallic materials
- KS B 1546-2015(2020) Metal compression fittings for polyethylene pipes
- KS D 1780-2016(2021) General rules for determination of carbon in metallic materials
- KS M 3066-2012 Testing methods for polyethylene coatings on metals
- KS C 3618-1983 Polyethylene insulated metal sheathed cable for telephone
- KS M 3066-2012(2022) Testing methods for polyethylene coatings on metals
- KS M 3066-1982 Testing methods for polyethylene coatings on metals
- KS D 1780-2011 General rules for determination of carbon in metallic materials
GM Daewoo, metal carbene
RU-GOST R, metal carbene
- GOST 27069-1986 Ferroalloys, metal chromium and metal manganese. Methods for determination of carbon
- GOST 22720.3-1977 Rare metals and their alloys. Method for the determination of carbon
- GOST 22720.1-1977 Rare metals and their alloys. Methods for the determination of oxygen, hydrogen, nitrogen and carbon
Society of Automotive Engineers (SAE), metal carbene
- SAE AMS3380D-1991 Hose, Polytetrafluoroethylene TFE Fluorocarbon Resin Wire Braid Reinforced
Defense Logistics Agency, metal carbene
- DLA MS500106 REINST NOTICE 2-2006 BAR, METAL, ROUND, STEEL, CARBON, 1018
- DLA MS500106-1987 BAR, METAL, ROUND, STEEL, CARBON, 1018
- DLA MS500106 VALID NOTICE 3-2013 Bar, Metal, Round, Steel, Carbon 1018
- DLA MS500106 (1)-2011 BAR, METAL, ROUND, STEEL, CARBON 1018
IT-UNI, metal carbene
German Institute for Standardization, metal carbene
AIA/NAS - Aerospace Industries Association of America Inc., metal carbene
SE-SIS, metal carbene
- SIS SS 06 40 25-1985 Metal arc welding with covered electrodes of carbon, carbon manganese and microalloyed steels
- SIS MNC 990-1990 Welding electrodes — Tubular wires for gas metal are welding and metal are welding of carbon steels, carbon-manganese steels and microalloyed steels — Summary
- SIS SS 06 11 01-1990 Welding electrodes — Wire electrodes and tubular wires for gas metal arc welding and metal arc welding of carbon steel, carbon-manganese alloyed steel, microalloyed steel and low-alloyed steel — Weld metal test specimens for all-weld-metal tests
- SIS SS 06 13 01-1990 Consumables — Wire electrodes and fluxes for submerged-arc welding of carbon steels, carbon-manganese steels, microalloyed steel and low-alloyed steels — Weld metal test specimens for all-weld-metal tests
- SIS SS 06 01 41-1990 Welding electrodes — Tubular wires for gas metal arc welding and metal arc welding of carbon steels, carbon-manganese steels and microalloyed steels — Technical requirements for inspection and deliver/
- SIS SS 06 11 02-1990 Welding electrodes — Wire electrodes and tubular wires for gas metal arc welding and metal arc welding of carbon steel, carbon-manganese alloyedsteel, microalloyed steel and low-alloyed steel — Welds and v/eld meta! bars for butt weld tests
IN-BIS, metal carbene
Association Francaise de Normalisation, metal carbene
- NF A91-501:2013 Metallic and other inorganic coatings - Phosphate conversion coating of metals
- NF ISO 1651:1995 Mandrins d'étirage de tubes, à noyau en métaux-durs (carbures métalliques) - Dimensions.
- NF H33-006:1989 Metal containers. Hermetically metal cans for carbonated drinks. Designation and dimensional characteristics.
- NF ISO 242:2014 Plaquettes à braser en carbures métalliques pour outils de tour
- NF T25-107:2011 Carbon fibers - Chemical analysis - Determination of metal impurities.
- NF ISO 1684:1995 Filières d'étirage et de tréfilage à noyau en métaux-durs (carbures métalliques) - Spécification.
- NF EN ISO 3908:2009 Métaux-durs - Dosage du carbone insoluble (libre) - Méthode gravimétrique
International Organization for Standardization (ISO), metal carbene
- ISO 9717:2010 Metallic and other inorganic coatings - Phosphate conversion coating of metals
- ISO 9717:2017 Metallic and other inorganic coatings - Phosphate conversion coating of metals
- ISO 4498-2:1981 Sintered metal materials, excluding hardmetals; Determination of apparent hardness; Part 2 : Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
Professional Standard - Textile, metal carbene
- FZ/T 50060-2022 Carbon Fiber Alkali Metal and Alkaline Earth Metal Content Test Method
- FZ/T 63041-2018 Polyethylene and conductive metal wire twisted cord
HU-MSZT, metal carbene
US-FCR, metal carbene
PL-PKN, metal carbene
- PN H04707-1991 Non-ferrous metals and alloys. Determination of carbon content
- PN H92601-1971 Carbon steel Wire rod for po?ented wire
- PN H04232-03-1986 Chemical analysis of alloy components Chromium metallic Determination of carbon
CZ-CSN, metal carbene
BE-NBN, metal carbene
International Federation of Trucks and Engines, metal carbene
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, metal carbene
Taiwan Provincial Standard of the People's Republic of China, metal carbene
- CNS 12005-1987 Polyvinyl Chloride-Metal Laminated Sheets
- CNS 8004-1981 Methods of Chemical Analysis for Carbon in Manganese Metal
- CNS 11070-1984 General Rules of Determination for Carbon in Metallic Materials
- CNS 8403-1982 Methods of Chemical Analysis for Chromium and Carbon in Chromium Metal
- CNS 12006-1987 Method of Test for Polyvinyl Chloride-Metal Laminated Sheets
- CNS 8284-1982 Method of Chemical Analysis for Carbon in Metallic Silicon (Electric Method)
- CNS 8526-1982 Method of Test for Polyethylene Coating on Metals
- CNS 8283-1982 Method of Chemical Analysis for Carbon in Metallic Silicon (Conductivity Method)
ZA-SANS, metal carbene
- SANS 462:2005 Welded wire fabric gabions and gabion mattresses (Metallic-coated or polyvinyl chloride (PVC) coated)
Association of German Mechanical Engineers, metal carbene
- VDI 2576-2010 Emission control - Carbothermic and metallothermic production of ferroalloys and silicon metal
Japanese Industrial Standards Committee (JISC), metal carbene
- JIS Z 2615:1996 General rules for determination of carbon in metallic materials
- JIS Z 3183:2012 Classification for deposited metal of submerged arc welding for carbon steel and low alloy steel
- JIS K 6744:1992 Polyvinyl chloride coated and laminated metal sheets
- JIS Z 2615:2009 General rules for determination of carbon in metallic materials
- JIS Z 2615:2015 General rules for determination of carbon in metallic materials
- JIS Z 2615 AMD 1:2006 General rules for determination of carbon in metallic materials (Amendment 1)
Group Standards of the People's Republic of China, metal carbene
Professional Standard - Building Materials, metal carbene
国家建筑材料工业局, metal carbene
RO-ASRO, metal carbene
- SR ISO 4498-2:1996 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
- STAS 4605/16-1980 NON METAL-BEARING MINING PRODUCTS "WITH CARBONATE CONTENT Detennination of carbon dioxide
- STAS 7603-1966
- STAS 8264/1-1983 HARD METALS Metallographie determination of porosity and uneombined carbon
- STAS 10907-1977 NON-METALLIFEROUS MINING PRODUCTS WITH CARBONATES CONTENT Sampling
- STAS 4605/7-1972 NON-METAL BEAR IN G MINING PRODUCTS WITH CARBONATE CONTENT Determinalion of titanium dioxide
- STAS 4605/10-1980 NON METAL-BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of magnesium oxide
- STAS 4605/3-1980 NON METAL-BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determinntion of loss ignition
Indonesia Standards, metal carbene
AASHTO - American Association of State Highway and Transportation Officials, metal carbene
- M 280-2003 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
- M 280-2014 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire
- M 280-2009 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire
Professional Standard - Ferrous Metallurgy, metal carbene
American Society for Testing and Materials (ASTM), metal carbene
- ASTM A121-13(2017) Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
- ASTM A1003/A1003M-05 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-10 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A974-97 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
- ASTM A974-97(2003) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
- ASTM A974-97(2011) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
- ASTM F1380-95a Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing
- ASTM F1380-95a(2002)e1 Standard Specification for Metal Insert Fittings for Polybutylene (PB) Tubing
- ASTM A1003/A1003M-13b Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM E1941-10 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
- ASTM A121-07 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
- ASTM A121-19 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
- ASTM A121-22 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
- ASTM A121-13 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
- ASTM A1003/A1003M-01 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-00 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-02 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-02a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-08 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-09 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-11e1 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-12 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-14 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A1003/A1003M-15 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- ASTM A975-97 Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
- ASTM A975-97(2003) Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
工业和信息化部, metal carbene
Military Standard of the People's Republic of China-General Armament Department, metal carbene
- GJB 2845-1997 Specification for carbon fiber woven fabrics with wire
BR-ABNT, metal carbene
PT-IPQ, metal carbene
- NP EN 12149-1-1999 Wallcoverings in roll form Determination of migration of heavy metais and certain other elements, of vinyl chloride monomer and of formaldehyde release
- NP 3304-1988 Small tools Hardmetal heading dies. Terminology
YU-JUS, metal carbene
- JUS C.A4.055-1987 Mechanical testing of meta/s. Determination of apparent hardness ofs/nteres metal materials, excluding hardmeta/s. Case-hardened ferrous materials, surface enriched bycarbon orcarbon and nitrogen
British Standards Institution (BSI), metal carbene
- BS ISO 2804:1996 Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions
- BS ISO 2804:1997 Wire, bar or tube drawing dies. As-sintered pellets of hardmetal (carbide). Dimensions
GM North America, metal carbene
Professional Standard - Electron, metal carbene
- SJ/T 10464-2015 Metallized polypropylene film for capacitors
- SJ/T 10464-1993 Metallized polypropylene film for capacitors
- SJ/T 11171-1998 Specification for single and double sided carbon-coated printed boards without interlayer connection
Standard Association of Australia （SAA）, metal carbene
- AS/NZS 1553.1:1995 Covered electrodes for welding Part 1: Low carbon steel electrodes for manual metal-arc welding of carbon steels and carbon-manganese steels
Professional Standard - Light Industry, metal carbene
European Committee for Standardization (CEN), metal carbene
- prEN 499-1991 Classification of covered electrodes for manual metal arc welding of carbon steels, carbon-manganese steels and micro alloyed steels
- EN 24505:1993 Hardmetals - Metallographic Determination of Porosity and Uncombined Carbon
AWS - American Welding Society, metal carbene
- A5.1/A5.1M-2004 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
- A5.1-1978 Specification for Carbon Steel Electrodes for Shielded Metal ArcWelding
- A5.1-1991 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
The American Road & Transportation Builders Association, metal carbene
- AASHTO M 280-2014 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire
American National Standards Institute （ANSI), metal carbene
NEMA - National Electrical Manufacturers Association, metal carbene
- NEMA RN 1-2018 Polyvinyl-Chloride (PVC) Externally Coated Galvanized Rigid Steel Metal Conduit and Intermediate Metal Conduit
(U.S.) Ford Automotive Standards, metal carbene
- FORD FLTM EU-BA 054-01-2000 METAL FOIL METHOD FOR DETERMINATION OF C- AND N-POTENTIAL OF CARBURIZING AND CARBONITRIDING FURNACE ATMOSPHERES
Professional Standard - Construction Industry, metal carbene
未注明发布机构, metal carbene
- BS 3146-1:1974(1999) Specification for Investment castings in metal — Part 1 : Carbon and low alloy steels
Professional Standard - Railway, metal carbene
- TB/T 1842.2-2002 Steeped metal carbon slider for electric locomotive power collector slider
Danish Standards Foundation, metal carbene
- DS/EN 60811-607:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene
European Committee for Electrotechnical Standardization（CENELEC）, metal carbene
- EN 60811-607:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene
AENOR, metal carbene
- UNE-EN 60811-607:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene
United States Navy, metal carbene