ZH
RU
ES
Metal Streamline Experiment
Metal Streamline Experiment, Total:500 items.
In the international standard classification, Metal Streamline Experiment involves: Electrical and electronic testing, Corrosion of metals, Testing of metals, Iron and steel products, Chipless working equipment, Aircraft and space vehicles in general, Analytical chemistry, Adhesives, Surface treatment and coating, Protection against fire, Electrical engineering in general, Wastes, Powder metallurgy, Non-ferrous metals, Non-metalliferous minerals, Electrical wires and cables, Environmental testing, Production of metals, Test conditions and procedures in general, Pipeline components and pipelines, Vocabularies, Electronic tubes, Capacitors, Power transmission and distribution networks, Aerospace fluid systems and components, Medical equipment, Ergonomics, Protection of and in buildings, Non-destructive testing, Aerospace electric equipment and systems, Telecommunication systems, Power stations in general, Particle size analysis. Sieving, Welding, brazing and soldering, Lubricants, industrial oils and related products, Insulation, Nuclear energy engineering, Equipment for entertainment, Paper and board, Materials for the reinforcement of composites, Electrical accessories, Elements of buildings, Quality, Fluid power systems, Electronic components in general, Water quality, Springs, Linear and angular measurements, Vibrations, shock and vibration measurements, Semiconductor devices, Protection against crime, Fasteners for aerospace construction, Paint coating processes, Bearings, Petroleum, petroleum products and natural gas handling equipment, Rubber and plastics products, Road vehicle systems, Insulating materials, Switchgear and controlgear, Fluid storage devices, Installations in buildings.
ES-AENOR, Metal Streamline Experiment
Taiwan Provincial Standard of the People's Republic of China, Metal Streamline Experiment
- CNS 11400-1985 Method of Eddy Current Test for Metal Bars Rods and Wires
- CNS 4162-1987 Measurement of Thickness of Metallic Coatings by the Jet Test Method
- CNS 14601-2001 MAG welding solid wires for low temperature service steel
- CNS 4798.29-1995 Method of test for toy safety (Flexure test for toys with stiffening means for retention of form)
- CNS 8967-2001 MAG welding solid wires for mild steel and high strength steel
- CNS 4798-29-1995 Method of test for toy safety (Flexure test for toys with stiffening means for retention of form)
IT-UNI, Metal Streamline Experiment
Group Standards of the People's Republic of China, Metal Streamline Experiment
- T/SLEA 0021-2023 laboratory metal cabinets
- T/LZZLXH 037-2020 Specification for treatment of heavy metal wastewater in laboratory
- T/CSTM 00349-2022 Specification for mineral dressing test in non-metallic ore laboratory
- T/HZBX 023-2019 Specification for on line inspection of vertical metal atmospheric pressure vessel
- T/CEC 604-2022 Specifications for insulators used in AC gas-insulated metal-enclosed transmission lines
- T/QGCML 911-2023 10kV AC Transmission Line Composite Jacket Gapless Metal Oxide Surge Arrester
- T/CASME 460-2023 Metal oxide arrester with fixed gap in series with composite jacket for 10kV AC transmission line
- T/CSEE 0001-2015 Specification of polymer-housed metal oxide surge arresters with series gap for 1000KV AC power transmission lines
Standard Association of Australia （SAA）, Metal Streamline Experiment
- AS 2505.2:2004 Metallic materials - Bars, rods and solid shapes - Bend tests
- AS 2084:1987 Non-destructive testing - Eddy current testing of metal tubes
- AS 2331.3.12:2006 Methods of test for metallic and related coatings - Corrosion and related property tests - Cyclic salt fog/UV exposure of organically coated metal
- AS 2331.1.4:2001 Methods of test for metallic and related coatings - Local thickness tests - Magnetic induction and eddy current methods
- AS 4544:2005 Non-destructive testing - Eddy current testing for the detection of surface flaws - Ferromagnetic and non-ferromagnetic metallic products
- AS 60695.5.3:2006 Fire hazard testing - Corrosion damage effects of fire effluent - Leakage-current and metal-loss test method
American Society for Testing and Materials (ASTM), Metal Streamline Experiment
- ASTM E1030/E1030M-21 Standard Practice for Radiographic Examination of Metallic Castings
- ASTM E785-81(1996)e1 Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM G31-72(1999) Standard Practice for Laboratory Immersion Corrosion Testing of Metals
- ASTM G31-12a Standard Practice for Laboratory Immersion Corrosion Testing of Metals
- ASTM G31-72(2004) Standard Practice for Laboratory Immersion Corrosion Testing of Metals
- ASTM D1780-05(2020) Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
- ASTM G50-76(2003) Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
- ASTM E703-09 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals
- ASTM E703-20 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals
- ASTM E785-81(2006) Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM E785-81(2001) Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM E785-81(2017) Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM D8457-22 Standard Practice for Cleaning Glass and Plastic Labware Used in Metal and Metalloid Analyses
- ASTM B213-03 Standard Test Method for Flow Rate of Metal Powders
- ASTM B213-97 Standard Test Method for Flow Rate of Metal Powders
- ASTM F180-94(2010)e1 Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
- ASTM F180-94(2015) Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
- ASTM NACE/ASTM G31-12a Standard Guide for Laboratory Immersion Corrosion Testing of Metals
- ASTM NACE/ASTM G31-12 Standard Guide for Laboratory Immersion Corrosion Testing of Metals
- ASTM A938-04 Standard Test Method for Torsion Testing of Wire
- ASTM A938-97 Standard Test Method for Torsion Testing of Wire
- ASTM A938-97(2003) Standard Test Method for Torsion Testing of Wire
- ASTM E785-81(2011) Standard Specification for Crucibles, Ignition, Laboratory, Metal
- ASTM E566-09 Standard Practice for Electromagnetic (Eddy-Current) Sorting of Ferrous Metals
- ASTM E566-14 Standard Practice for Electromagnetic 40;Eddy Current41; Sorting of Ferrous Metals
- ASTM E703-14 Standard Practice for Electromagnetic 40;Eddy Current41; Sorting of Nonferrous Metals
- ASTM G31-21 Standard Guide for Laboratory Immersion Corrosion Testing of Metals
- ASTM NACE/ASTMG31-12 Standard Guide for Laboratory Immersion Corrosion Testing of Metals
- ASTM NACE/ASTMG31-12a Standard Guide for Laboratory Immersion Corrosion Testing of Metals
- ASTM E213-04 Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing
- ASTM E213-02 Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing
- ASTM E448-82(1997)e1 Standard Practice for Scleroscope Hardness Testing of Metallic Materials
- ASTM E213-20 Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing
- ASTM F85-76(2013) Standard Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes
- ASTM D5894-96 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
- ASTM E566-19 Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals
- ASTM F1801-97(2009)e1 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
- ASTM F1801-97(2014) Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
- ASTM F1801-20 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
- ASTM E103-17 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
- ASTM E1030/E1030M-15 Standard Practice for Radiographic Examination of Metallic Castings
- ASTM F2895-15 Standard Practice for Digital Radiography of Cast Metallic Implants
- ASTM F2895-20 Standard Practice for Digital Radiography of Cast Metallic Implants
- ASTM E1030-05(2011) Standard Test Method for Radiographic Examination of Metallic Castings
- ASTM B213-11 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM D1780-05(2012) Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
- ASTM F629-20 Standard Practice for Radiography of Cast Metallic Surgical Implants
- ASTM A931-96 Standard Test Method for Tension Testing of Wire Ropes and Strand
- ASTM A931-96(2002) Standard Test Method for Tension Testing of Wire Ropes and Strand
- ASTM A931-96(2008) Standard Test Method for Tension Testing of Wire Ropes and Strand
- ASTM A931-08 Standard Test Method for Tension Testing of Wire Ropes and Strand
- ASTM A931-08(2013) Standard Test Method for Tension Testing of Wire Ropes and Strand
- ASTM B213-20 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B213-17 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B213-13 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- ASTM B890-07(2012) Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM B571-97e1 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- ASTM B571-97(2003) Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- ASTM G50-10 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
- ASTM E213-14e1 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
- ASTM B331-20 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
- ASTM B571-97(2008)e1 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- ASTM B571-97(2013) Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- ASTM B571-23 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- ASTM G151-06 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM E1030-00 Standard Test Method for Radiographic Examination of Metallic Castings
- ASTM E1030-05 Standard Test Method for Radiographic Examination of Metallic Castings
- ASTM B489-85(1998) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
- ASTM B489-85(2018) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
- ASTM B890-07 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- ASTM D1780-05 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
- ASTM E213-22 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
- ASTM G50-10(2015) Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
- ASTM B312-20 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
- ASTM B571-18 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
- ASTM B527-23 Standard Test Method for Tap Density of Metal Powders and Compounds
- ASTM B527-15 Standard Test Method for Tap Density of Metal Powders and Compounds
- ASTM G151-00 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM G151-97 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM G151-09 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM F629-15 Standard Practice for Radiography of Cast Metallic Surgical Implants
- ASTM G160-98 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials by Laboratory Soil Burial
- ASTM G160-12(2019) Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial
- ASTM E243-18 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes
- ASTM B489-85(2023) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
- ASTM D5619-00 Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
- ASTM D5619-00(2005) Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
- ASTM G151-10 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM G151-19 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- ASTM E22-41 Recommended Practice for Conducting Long-Time High-Temperature Tension Test of Metallic Materials
- ASTM D7376-10 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
- ASTM D7376-10a(2022) Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
- ASTM B212-99 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B212-99(2006) Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B964-23 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- ASTM C1517-16 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
- ASTM E571-19 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
- ASTM E243-09 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes
- ASTM E1085-95(2004) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
- ASTM E1085-95(2000) Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
- ASTM E1085-95(2004)e1 Standard Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
- ASTM D6320/D6320M-10 Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel
- ASTM C1517-02 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
- ASTM C1517-09 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy
- ASTM G160-12 Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial
- ASTM G154-06 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
- ASTM G154-00ae1 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
- ASTM G154-00a Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
- ASTM G154-00 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
- ASTM D5723-95(2010) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
- ASTM D5723-95(2002) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
- ASTM D5723-95(2019) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
- ASTM F458-06 Standard Practice for Nondestructive Pull Testing of Wire Bonds
- ASTM E468-90(2004)e1 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
- ASTM G85-02e1 Standard Practice for Modified Salt Spray (Fog) Testing
- ASTM G85-02 Standard Practice for Modified Salt Spray (Fog) Testing
- ASTM E468-90(1998) Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
- ASTM E468-18 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
- ASTM F458-13 Standard Practice for Nondestructive Pull Testing of Wire Bonds
- ASTM E468/E468M-23 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
- ASTM F601-23 Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
- ASTM B417-00(2006)e1 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM B417-00 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- ASTM B964-16 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- ASTM E747-97 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
- ASTM B489-85(2008)e1 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
- ASTM B489-85(2013) Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals
- ASTM D6320-02 Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel
- ASTM D6320-99 Standard Test Methods for Single Filament Hose Reinforcing Wire Made from Steel
- ASTM B389-81(2016) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
- ASTM G116-99(2010) Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
- ASTM G90-98 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
- ASTM G154-12a Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
- ASTM G154-12 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials
- ASTM G90-05 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
- ASTM B527-93(1997) Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
- ASTM F14-80(1995)e1 Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
- ASTM B527-93(2000)e1 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
- ASTM F14-80(2019) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
- ASTM G33-99(2020) Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
- ASTM E2534-10 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
- ASTM F314-70(1980)e1 Methods of Test for Identification of Metallic and Fibrous Contaminants in Aerospace Fluids
- ASTM B964-09 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- ASTM F1261M-96 Standard Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line [Metric]
- ASTM F1261M-96(2003) Standard Test Method for Determining the Average Electrical Width of a Straight, Thin-Film Metal Line [Metric]
- ASTM B362-91(2016) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
- ASTM E3213-19 Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
- ASTM F14-80(2005) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
- ASTM F14-80(2010) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
- ASTM F1800-19 Standard Practice for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
- ASTM E1068-85(1996)e1 Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
- ASTM B212-12 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B212-13 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- ASTM B362-91(2003) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
- ASTM D5723-95(2015) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
- ASTM D6491-99(2003) Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
- ASTM G87-02 Standard Practice for Conducting Moist SO2 Tests
- ASTM G87-02(2007) Standard Practice for Conducting Moist SO2 Tests
- ASTM D6665-09 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
- ASTM D6665-09(2019) Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
- ASTM D6491-09(2016) Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
- ASTM E2534-20 Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
- ASTM E571-98(2007)e1 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products
- ASTM F390-98(2003) Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array
- ASTM B389-81(2004) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
- ASTM B389-81(2008) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
- ASTM E399-20a Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
- ASTM E399-22 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
- ASTM E399-23 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
- ASTM D6491-99 Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
- ASTM E1930-07 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
- ASTM D6665-01 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
- ASTM D6491-09 Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
- ASTM G33-99(2015) Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
- ASTM D6665-09(2014) Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
FI-SFS, Metal Streamline Experiment
RU-GOST R, Metal Streamline Experiment
- GOST 16438-1970 Sand and metal moulds for making of fluidity of metals tects
- GOST ISO 7800-2013 Metallic materials. Wire. Simple torsion test
- GOST 23055-1978 Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
- GOST 9.040-1974 Unified system of corrosion and ageing protection. Calculated and experimental method for accelerated test of corrosion lossen in atmospheric conditions
- GOST 9.910-1988 Unified system of corrosion and ageing protection. Metals, alloys, heat-resistant coatings. Method of thermal fatigue testing of wedge shaded specimens in gas flows
SE-SIS, Metal Streamline Experiment
HU-MSZT, Metal Streamline Experiment
Military Standards (MIL-STD), Metal Streamline Experiment
IN-BIS, Metal Streamline Experiment
International Organization for Standardization (ISO), Metal Streamline Experiment
- ISO/R 956:1969 Tensile test for light metal and light metal alloy wires
- ISO 7802:1983 Metallic materials; Wire; Wrapping test
- ISO 7802:2013 Metallic materials.Wire.Wrapping test
- ISO 7800:2003 Metallic materials - Wire - Simple torsion test
- ISO 7800:2012 Metallic materials - Wire - Simple torsion test
- ISO 9649:2016 Metallic materials - Wire - Reverse torsion test
- ISO 7800:1984 Metallic materials; Wire; Simple torsion test
- ISO 7801:1984 Metallic materials; Wire; Reverse bend test
- ISO 9649:1990 Metallic materials; wire; reverse torsion test
- ISO/CD 7801 Metallic materials — Wire — Reverse bend test
- ISO 9649:2023 Metallic materials — Wire — Reverse torsion test
- ISO/DIS 7801:2023 Metallic materials — Wire — Reverse bend test
- ISO/TR 7242:1981 Chemical analysis of light metals and their alloys; Statistical interpretation of inter-laboratory trials
- ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory
- ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory
- ISO 4524-2:2000 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Part 2: Mixed flowing gas (MFG) environmental tests
- ISO 864:1975 Solid wires for gas-shielded metal-arc welding of mild steel — Dimensions of wires, spools, rims and coils
- ISO 5579:1985 Non-destructive testing; Radiographic examination of metallic materials by X- and gamma rays; Basic rules
- ISO 3777:1976 Radiographic inspection of resistance spot welds for aluminium and its alloys; Recommended practice
- ISO/TR 16203:2016 Corrosion of metals and alloys - Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
- ISO 9584:1993 Implants for surgery; non-destructive testing; radiographic examination of cast metallic surgical implants
- ISO 11237:2010 Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
- ISO 11237:2017 Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids - Specification
- ISO 5579:2013 Non-destructive testing.Radiographic testing of metallic materials using film and X- or gamma rays.Basic rules
- ISO 5579:1998 Non-destructive testing - Radiographic examination of metallic materials by X- and gamma-rays - Basic rules
RO-ASRO, Metal Streamline Experiment
- STAS 10782-1976 Tests of metals TUBES SAMPLING FOR MECHANICAL TESTING
- STAS 6679/15-1985 Metal-cutting machinc-tools ADIAL EUN-OUT HBCKING TEST
- STAS 6622-1990 Tests of metals WRAPPING TEST FOII WIRES
- STAS 6605-1978 Tests of metals TENSILE TESTING OF REINFORCED STEEL, WIRE AND WIRE PRODUCTS FOR PRESTRESSED CONCRETE
- STAS SR ISO 9649:1996 Metallic materials. Wire. Reverse torsion test
- STAS SR ISO 7801:1993 Metallic materials. Wire. Reverse bend test
- STAS 10392-1975 Tests of metals WRAPPING TEST FOR ALUMINIUM AND ALUMINIUM ALLOY WIRKES
- STAS 9066-1981 Tests of metals WRAPPING TEST FOR COPPER AND COPPER ALLOY WIERS
- STAS 10039-1984 Metal frame furniture WORKING TABLES FOR SCHOOL LABORATORIES
- STAS SR ISO 8565:1995 Metals and alloys. Atmospheric corrosion testing Generai requirements for field tests
- STAS 10140-1984 Metal frame furniture TABLE-CHAIR FOR SCHOOL LABORATORIES
- STAS 6606/1-1986 RADIOLOGICAL FLAW DETECTION Radiographic examination of metallic materials. Genera] technical requirements
- STAS SR EN 10002-2-1995 Metallic materials. Tensile testing. Part 2 : Verification of the force measuring system of the tensile testing machines
- STAS SR EN 444-1996 Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamrna-rays
BE-NBN, Metal Streamline Experiment
German Institute for Standardization, Metal Streamline Experiment
- DIN 12892:1977 Metal laboratory ware; stand bases
- DIN 12895-1:1977 Metal laboratory ware; bossheads
- DIN 12893:1976 Metal laboratory ware; stand rods
- DIN 12894:1997 Metal laboratory ware - Clamps
- DIN 12895-2:1978 Metal laboratory ware; hook connector
- DIN ISO 14315:1998 Industrial wire screens - Technical requirements and testing (ISO 14315:1997)
- DIN EN ISO 12004-2:2009 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008); English version of DIN EN ISO 12004-2:2009-02
- DIN 12897:1978 Metal laboratory ware; supports, scissors jack type, safety requirements and tests
- DIN VDE 0472-812:1984 Testing of cables, wires and flexible cords; continuity of metallic coatings [VDE Specification]
- DIN 57472-812:1984 Testing of cables, wires and flexible cords; continuity of metallic coatings [VDE Specification]
- DIN 51368:1990 Determination of fraction separated by hydrochloric acid from water mix metal working fluids
- DIN EN ISO 12004-2:2021-07 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021); German version EN ISO 12004-2:2021
- DIN 50920-1:1985 Corrosion of metals; corrosion testing in flowing liquids; general
- DIN EN ISO 12004-2:2019 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO/DIS 12004-2:2019); German and English version prEN ISO 12004-2:2019
- DIN 50905-4:2018-03 Corrosion of metals - Corrosion testing - Part 4: Performance of chemical corrosion experiments without mechanical stresses in liquids in the laboratory
- DIN 50905-4:1987 Corrosion of metals; corrosion testing; corrosion testing in liquids under laboratory conditions without mechanical stress
- DIN EN 444:1994 Non-destructive testing; general principles for the radiographic examination of metallic materials using X-rays and gamma-rays; German version EN 444:1994
- DIN EN 2002-21:2020 Aerospace series - Metallic materials - Test methods - Part 21: Radiographic testing of castings; German and English version EN 2002-21:2019
Korean Agency for Technology and Standards (KATS), Metal Streamline Experiment
YU-JUS, Metal Streamline Experiment
Indonesia Standards, Metal Streamline Experiment
- SNI 07-6217-2000 Testing methods of metal laboratory corrosion
- SNI 07-4611-1998 Reverse bend test for metallic material wires
- SNI 6218-2012 Laboratory testing of metals for resistance to specific forms of environmental cracking in H2S environments
TH-TISI, Metal Streamline Experiment
- TIS 2175-2004 Reverse bend test for metallic wire [iso title: metallic materials.wire.reverse bend test]
- TIS 2176-2004 Torsion test for metallic wire [iso title: metallic materials.wire.simple torsion test]
- TIS 2177-2004 Reverse torsion test for metallic wire [iso title: metallic materials.wire.reverse torsion test]
Professional Standard - Machinery, Metal Streamline Experiment
- JB/T 6073-1992 Metal coating. Laboratory complete immersion corrosion test
- JB/T 7901-1999 Metals materials - Uniform corrosion - Methods of laboratory immersion testing
- JB/T 8426-1996 Metal coating. X-ray diffraction test method for nickel-phosphorus alloy coating
- JB/T 10497-2005 Polymeric housed metal oxide surge arresters with series gap for a.c. electric power transmission line
- JB/T 6479-1992 Metal oxide surge arresters with series gap for line trapping of AC power system
British Standards Institution (BSI), Metal Streamline Experiment
- BS EN 60695-2-11:2001 Fire hazard testing - Test methods - Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products
- BS EN 60695-2-11:2014 Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT)
- BS ISO 7802:2013 Metallic materials. Wire. Wrapping test
- BS ISO 9649:2016 Metallic materials. Wire. Reverse torsion test
- BS ISO 7800:2012 Metallic materials. Wire. Simple torsion test
- BS EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forminglimit
curves - Part 2: Determination of forming-limit curves in the
laboratory
- BS EN ISO 12004-2:2021 Metallic materials. Determination of forming-limit curves for sheet and strip. Determination of forming-limit curves in the laboratory
- BS ISO 4524-2:2000 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings - Mixed flowing gas (MFG) environmental tests
- BS ISO 20669:2017 Non-destructive testing. Pulsed eddy current testing of ferromagnetic metallic components
- BS EN 13068-3:2001 Non-destructive testing - Radioscopic testing - General principles of radioscopic testing of metallic materials by X- and gamma rays
- BS EN 13068-3:2001(2008) Non-destructive testing - Radioscopic testing - General principles of radioscopic testing of metallic materials by X- and gamma rays
- BS EN 14024:2004 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
- 19/30393818 DC BS EN ISO 12004-2. Metallic materials. Sheet and strip. Determination of forming-limit curves. Part 2. Determination of forming-limit curves in the laboratory
- BS ISO 10771-1:2002 Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Test method
- BS PD ISO/TR 16203:2016 Corrosion of metals and alloys. Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
- BS EN 13523-10:2010 Coil coated metals - Test methods - Resistance to fluorescent UV radiation and water condensation
- PD ISO/TR 16203:2016 Corrosion of metals and alloys. Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
- BS ISO 14137:2000 Machine tools - Test conditions for wire electrical-discharge machines (wire EDM) - Terminology and testing of the accuracy
- BS EN 3238:2010 Aerospace series. Metallic materials. Test method. Shear test for wires and rivets
- BS EN 13523-10:2001 Coil coated metals - Test methods - Resistance to fluorescent UV light and water condensation
- BS EN 62416:2010 Semiconductor devices - Hot carrier test on MOS transistors
- 19/30376110 DC BS EN ISO 19879. Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections
National Association of Corrosion Engineers (NACE), Metal Streamline Experiment
- NACE TM0169-2000 Laboratory Corrosion Testing of Metals Item No:21200
- NACE TM0169-2012 Standard Guide for Laboratory Immersion Corrosion Testing of Metals (Item No. 21200)
- NACE TM0190-2006 Impressed Current Laboratory Testing of Aluminum Alloy Anodes Item No:21221
- NACE TM0190-1998 Impressed Current Laboratory Testing of Aluminum Alloy Anodes Item No:21221
- NACE TM0190-2012 Impressed Current Laboratory Testing of Aluminum and Zinc Alloy Anodes (Item No. 21221)
Japanese Industrial Standards Committee (JISC), Metal Streamline Experiment
- JIS Z 2502:1979 Method for determination of flow rate of metal powders
- JIS H 7404:1993 Test method for linear thermal expansion coefficient of fiber reinforced metals
- JIS C 0079:2001 Fire hazard testing -- Part 2: Glowing/Hot wire based test methods -- Section 20: Hot-wire coil ignitability test on materials
VN-TCVN, Metal Streamline Experiment
- TCVN 1825-2008 Metallic materials.Wire.Wrapping test
- TCVN 1826-2006 Metallic materials.Wire.Reverse bend test
- TCVN 1827-2006 Metallic materials.wire.Simple torsion test
- TCVN 4775-1989 Ores and concentrates of non-ferrous metals.Sampling and preparation of samples for laboratory tests
- TCVN 6111-2009 Mon-destructive testing.Radiographic examination of metallic materials by X-and gamma-rays. Basic rules
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Metal Streamline Experiment
- GB 2976-1988 Metallic materials—Wire—Wrapping test
- GB/T 239-1999 Metallic materials--Wire--Torsion test
- GB/T 2976-1988 Metallic materials--Wire-wrapping test
- GB/T 2976-2004 Metallic materials-Wire-Wrapping test
- GB/T 238-2002 Metallic materials-Wire-Reverse bend test
- GB/T 238-2013 Metallic materials.Wire.Reverse bend test
- GB/T 6400-2007 Metallic materiaks-Shear test method for wires and rivets
- GB/T 24171.2-2009 Metallic materials.Sheet and strip.Determination of forming limit curves.Part 2:Determinations of forming limit curves in laboratory
- GB/T 4157-2006 Laboratory testing of metals for resistance to specific forms of environmental cracking in HS environments
- GB/T 239.2-2023 Wire rods of metallic materials - Part 2: Test methods for bidirectional torsion
- GB/T 239.1-2023 Wire rods of metallic materials - Part 1: Test method for unidirectional torsion
- GB/T 239.1-2012 Metallic materials.Wire.Part 1:Simple torsion test
- GB/T 239.2-2012 Metallic materials.Wire.Part 2:Reverse torsion test
- GB/T 3048.2-1994 Test methods for determining electrical properties of electric cables and wires.Measurement of resistivity of metallic conductive materials
- GB/T 8653-1988 Metallic materials--Determination of Young's modulus, chord modulus, tangent modulus and Poisson's ratio (statical method)
- GB/T 3048.2-2007 Test methods for electrical properties of wires and cables - Part 2: Tests for resistivity of metallic materials
- GB/T 37782-2019(英文版) "Metallic materials—Indentation test—Determination of strength,hardness and stressstrain curve"
- GB/T 38719-2020(英文版) Metallic materials Tube Determination of biaxial stress strain curve of tube by hydro bulging test
(U.S.) Ford Automotive Standards, Metal Streamline Experiment
Professional Standard - Electricity, Metal Streamline Experiment
- DL/T 5846-2021 1100kv AC gas-insulated metal-enclosed transmission line field handover test specification
- DL/T 1740-2017 Specifications for DC gas-insulated metal-enclosed transmission lines
- DL/T 815-2012 Polymer-housed metal oxide surge arresters for a.c.power transmission lines
- DL/T 815-2002 Metal oxide surge arresters for a.c. power transmission lines
- DL/T 1178-2012 Corona and RIV test methods for fittings of 1,000 kV AC transmission line
- DL/T 5779-2018 Specifications for construction and acceptance of gas-insulated metal-enclosed transmission lines
- DL/T 304-2011 Guide for hand-over test of gas-insulated metal-enclosed transmission line on site
Professional Standard - Aviation, Metal Streamline Experiment
PL-PKN, Metal Streamline Experiment
- PN H04631-1963 Corrosion testing of metals Laboratory testing of heat-resistance of steel in air
- PN-EN ISO 12004-2-2021-08 E Metallic materials -- Determination of forming-limit curves for sheet and strip -- Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
- PN E04160 ArkusZ11-1973 Electric cables Methods of testing Test of the mechanical characteristics of vires
- PN H04630-1966 Corrosion tes?ing of me?als Laboratory ?es?ing of intercrystalline corrosion resis?ance of corrosion resis?ing steel
- PN-EN ISO 19879-2021-08 E Metallic tube connections for fluid power and general use -- Test methods for hydraulic fluid power connections (ISO 19879:2021)
Professional Standard - Ferrous Metallurgy, Metal Streamline Experiment
- YB/T 127-2014 Ferrous metals-testing methods for electromagnetic (eddy-current) sorting
- YB/T 127-1997 Ferrous metals.Testing methods for electromagnetic (eddy-current ) sorting
- YB/T 4176-2008 Torsion test method for large gauge wire rods of metallic materials
CZ-CSN, Metal Streamline Experiment
ZA-SANS, Metal Streamline Experiment
- SANS 7801:2003 Metallic materials - Wire - Reverse bend test
- SANS 4524-2:2007 Metallic coatings - Test methods for electrodeposited gold and gold alloy coatings Part 2: Mixed flowing gas (MFG) environmental tests
- SANS 394:2004 Non-destructive testing - Radiographic examination of metallic materials by X- and gamma-rays - Basic rules
国家市场监督管理总局、中国国家标准化管理委员会, Metal Streamline Experiment
- GB/T 2976-2020 Metallic materials—Wire—Wrapping test
- GB/T 37782-2019 Metallic materials—Indentation test—Determination of strength, hardness and stress-strain curve
Liaoning Provincial Standard of the People's Republic of China, Metal Streamline Experiment
- DB21/T 2104-2013 Calibration procedure for metal wire repeated bending test machine
Association Francaise de Normalisation, Metal Streamline Experiment
- A05-300:1987 Physical-chemical tests. Recommendations for laboratory testing. Corrosion resistance of metals, alloys and metallic coatings.
- NF A03-670-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2 : determination of forming-limit curves in laboratory.
- NF A06-001:1979 Analysis of light metals by spectrography. Processing of test results. Statistical interpretation.
- NF A09-250-3*NF EN 13068-3:2002 Non-destructive testing - Radioscopic testing - Part 3 : general principles of radioscopic testing of metallic materials by X- and gamma rays.
- NF A09-201:1994 Non-destructive testing. General principles for radiographic examination of metallic materials by X- and gamma rays.
- FD A05-013*FD ISO/TR 16203:2016 Corrosion of metals and alloys - Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
- NF A81-314:1990 Welding.Solid bare wires and rods depositing a stainless and/or heat resisting steel weld metal.Tests on weld metal.
- NF EN 3238:2011 Série aérospatiale - Matériaux métalliques - Méthodes d'essais - Essai de cisaillement pour fils et rivets
- NF E48-075:2021 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
- NF L06-451*NF EN 3238:2011 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets.
- NF E22-571:1986 Plain bearings. Hardness testing of bearing metals. Part 2 : solid materials.
- NF E48-075:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections.
- NF EN 2002-21:2019 Série aérospatiale - Matériaux métalliques - Méthodes d'essai - Partie 21 : examen radiographique des pièces moulées
- NF A09-201*NF EN ISO 5579:2014 Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
American National Standards Institute （ANSI), Metal Streamline Experiment
- ANSI/EIA 495-A:1989 Film Dielectric Capacitors with Metallized Paper Electrodes for Alternating Current Applications
- ANSI/ASTM D3353:2010 Test Methods for Fibrous-Insulated Magnet Wire
- ANSI/IEEE 487:2007 Recommended Practice for the Protection of Wire-Line Communication Facilities Serving Electric Supply Locations
- ANSI/EIA 580BA00:1997 Blank Detail Specification: Fixed Metallized Electrode Film Dielectric AC Capacitors
- ANSI J-STD-002-1992 Solderability tests for component leads, terminations, lugs, terminals and wires
- ANSI/NACE TM0177-2006 Laboratory Testing of Metals for Resistance to Specific Forms of Environmental Cracking H2S Environments
- ANSI C37.51a-2010 "American National Standard for Switchgear - Metal-Enclosed Low-Voltage AC Power Circuit Breaker Switchgear Assemblies - Conformance Test Procedures - Amendment 1: Short-Time Withstand Current Tests".
KR-KS, Metal Streamline Experiment
- KS D ISO 7242-2021 Chemical analysis of light metals and their alloys —Statistical interpretation of inter-laboratory trials
- KS B ISO 5579-2022 Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules
SAE - SAE International, Metal Streamline Experiment
- SAE J2658-2010 Metallic Tube Conductor Assemblies for Fluid Power and General UseTest Methods for Hydraulic Fluid Power Metallic Tube Assemblies
- SAE J2658-2013 Carbon and Steel Alloy Tube Conductor Assemblies for Fluid Power and General Use - Test Methods for Hydraulic Fluid Power Metallic Tube Assemblies
- SAE J1644-1993 Metallic Tube Connections for Fluid Power and General Use-Test Methods for Threaded Hydraulic Fluid Power Connectors
- SAE J1644-2007 Metallic Tube Connections for Fluid Power and General Use-Test Methods for Threaded Hydraulic Fluid Power Connectors
Society of Automotive Engineers (SAE), Metal Streamline Experiment
- SAE J2658-2003 Metallic Tube Conductor Assemblies for Fluid Power and General UseTest Methods for Hydraulic Fluid Power Metallic Tube Assemblies
- SAE J1644-1998 Metallic Tube Connections for Fluid Power and General Use - Test Methods for Threaded Hydraulic Fluid Power Connectors
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Metal Streamline Experiment
- ASHRAE OR-05-16-2-2005 Altered Bi-Phase Flow Regime in Supermarket Evaporative Coils: Laboratory and Field Experiences
Professional Standard - Energy, Metal Streamline Experiment
European Association of Aerospace Industries, Metal Streamline Experiment
- AECMA PREN 2002-15-1986 Aerospace Series Test Methods for Metallic Materials Part 15 - Wrapping Test for Wire Issue P 1
- AECMA PREN 2002-12-1986 Aerospace Series Test Methods for Metallic Materials Part 12 - Simple Torsion Testing of Wire Issue P 1
- AECMA PREN 2002-13-1998 Aerospace Series Metallic Materials Test Methods Part 13: Reverse Torsion Testing of Wire Edition P 1
- AECMA PREN 2002-14-1986 Aerospace Series Test Methods for Metallic Materials Part 14 - Reverse Bend Testing of Wire Issue P 1
- AECMA PREN 2002-16-1989 Aerospace Series Test Methods for Metallic Materials Part 16: Method for Penetrant Flow Detection
国家能源局, Metal Streamline Experiment
- NB/T 10282-2019 Test Guidelines for AC Gapless Metal Oxide Arrester
- NB/T 42064-2015 3.6kV～40.5kV AC metal-enclosed switchgear and control equipment test guide
Danish Standards Foundation, Metal Streamline Experiment
- DS/EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory
- DS/ISO 12004-2:2021 Metallic materials – Determination of forming-limit curves for sheet and strip – Part 2: Determination of forming-limit curves in the laboratory
- DS/EN ISO 12004-2:2021 Metallic materials – Determination of forming-limit curves for sheet and strip – Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
- DS/ISO 5579:1987 Non-destructive testing. Radiographic examination of metallic materials by X-rays and gamma rays. Basic rules
- DS/ISO 19879:2021 Metallic tube connections for fluid power and general use – Test methods for hydraulic fluid power connections
- DS/EN 3238:2010 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets
- DS/EN ISO 19879:2010 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections
- DS/EN 444:1994 Non-destructive testing-General principles for radiographic examination of metallic materials by X-and gamma-rays
ES-UNE, Metal Streamline Experiment
- UNE-EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
- UNE-EN 3238:2010 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets (Endorsed by AENOR in November of 2010.)
未注明发布机构, Metal Streamline Experiment
- DIN EN ISO 12004-2:2021 Metallic materials – Determination of the forming limit curve for sheets and strips – Part 2: Determination of forming limit curves in the laboratory
European Committee for Standardization (CEN), Metal Streamline Experiment
- EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
- EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)
- EN 444:1994 Non-Destructive Testing - General Principles for Radiographic Examination of Metallic Materials by X- and Gamma-Rays
- EN 14024:2004 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
- EN 13523-15:2015 Coil coated metals - Test methods - Part 15: Metamerism
- prEN 444-1992 Non-destructive testing; general principles for radiographic examination of metallic materials by X- and gamma-rays
- EN 3238:2010 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets
- prEN 60695-2-1-1992 Fire hazard testing; part 2: test methods; section 1: glow-wire test and guidance (IEC 695-2-1:1991)
- EN 13523-27:2009 Coil coated metals - Test methods - Part 27: Resistance to humid poultice (Cataplasm test)
- EN ISO 5579:2013 Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules
API - American Petroleum Institute, Metal Streamline Experiment
- API REPORT 91-62-1993 Experimental Study of the Erosional/Corrosional Velocity Criterion for Sizing Multiphase Flow Lines Phase II-Experimental Results
- API REPORT 90-62-1991 Experimental Study of the Erosional/Corrosional Velocity Citerion for Sizing Multiphase Flow Lines Phase 1 - Experimental Facility Construction Report
CO-ICONTEC, Metal Streamline Experiment
Lithuanian Standards Office , Metal Streamline Experiment
- LST EN ISO 12004-2:2009 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)
- LST EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
- LST EN 3238-2011 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets
- LST EN 444-1998 Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
AT-ON, Metal Streamline Experiment
- OENORM EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
AENOR, Metal Streamline Experiment
- UNE-EN ISO 12004-2:2010 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)
IECQ - IEC: Quality Assessment System for Electronic Components, Metal Streamline Experiment
- QC 400101/ SU 0002-1984 Detail Specification for Electronic Components Fixed Low-Power Non-Wirewound Thin Film Metal Dielectric a.c. and d.c. Resistors
- QC 400101/ SU 0001-1984 Detail Specification for Electronic Components Fixed Low-Power Non-Wirewound Thin Film Metal Dielectric a.c. and d.c. Resistors
- QC 400101/ SU 0003-1984 Detail Specification for Electronic Components Fixed Low-Power Non-Wirewound Thin Film Metal Dielectric a.c. and d.c. Resistors
- QC 400101/ SU 0006-1990 Detail Specification for Electronic Components Fixed Low-Power Non-Wirewound Metal Film a.c. and d.c. and Pulse Resistors Type PI-4
Defense Logistics Agency, Metal Streamline Experiment
- DLA A-A-55697 B-2012 TUBE, NONMETALLIC; POLYVINYL CHLORIDE (PVC) FLEXIBLE (FOR LABORATORY AND MEDICAL USE)
国家认证认可监督管理委员会, Metal Streamline Experiment
- RB/T 146-2018 Implementation Guide for Mechanical Performance Capability Verification of Metal Products Used in Construction Engineering
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Metal Streamline Experiment
- PREN 3238-1993 Aerospace Series Test Methods for Metallic Materials Except Aluminium and Aluminium Alloys Shear Test for Wires and Rivets
Shanxi Provincial Standard of the People's Republic of China, Metal Streamline Experiment
- DB14/T 1865-2019 Technical specification for acceptance of heavy metal online monitoring system for water pollution sources
Association of German Mechanical Engineers, Metal Streamline Experiment
- DVS 0909-1974 Gas-shielded metal arc welding; determination of the production performance and recovery of solid wire electrodes
- VDI/VDE 2635 Blatt 1-2015 Experimental structure analysis - Metallic bonded resistance strain gauges - Characteristics and testing conditions
Professional Standard - Public Safety Standards, Metal Streamline Experiment
- GA/T 1995-2022 Forensic Science Metal Examination Wavelength Dispersive X-ray Fluorescence Spectrometry
- GA/T 1938-2021 Forensic Science Metal Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
Professional Standard - Medicine, Metal Streamline Experiment
- YY/T 1565-2017 Implants for surgery.Non-destructive testing.Radiographic examination of cast metallic surgical implants
JP-JEM, Metal Streamline Experiment
- JEM TR 122-2008 Guide for maintenance and inspection of a.c.metal-enclosed switchgear and controlgear
International Electrotechnical Commission (IEC), Metal Streamline Experiment
- IEC 60695-2-1:1991 Fire hazard testing; part 2: test methods; section 1: glow-wire test and guidance
ISA - International Society of Automation, Metal Streamline Experiment
- ISA RP16.1@2@3-1959 Terminology@ Dimensions and Safety Practices for Indicating Variable Area Meters (Rotameters) RP16.1 Glass Tube; RP16.2 Metal Tube; RP16.3 Extension Type Glass Tube