ZH
RU
ES

transient plasmid

transient plasmid, Total:499 items.

In the international standard classification, transient plasmid involves: Terminology (principles and coordination), Power stations in general, Fuels, Particle size analysis. Sieving, Tunnel construction, Powder metallurgy, Milk and milk products, Construction materials, Air quality, Agricultural machines, implements and equipment, Cereals, pulses and derived products, Farming and forestry, Soil quality. Pedology, Biology. Botany. Zoology, Road vehicle systems, Burners. Boilers, Equipment for the chemical industry, ENERGY AND HEAT TRANSFER ENGINEERING, Products of the chemical industry, Elements of buildings, Body care equipment, Pulps, Tobacco, tobacco products and related equipment, Refractories, Protection against fire, Rubber, Commercial vehicles, Plastics, Internal combustion engines, Non-metalliferous minerals, Medical equipment, Mining equipment, Cork and cork products, Water quality, Radiation measurements, Quality, Raw materials for rubber and plastics, Coatings and related processes used in aerospace industry, Food products in general, Mining and quarrying, Fluid power systems, Animal feeding stuffs, Internal combustion engines for road vehicles, Semiconductor devices, Linear and angular measurements, Passenger and cabin equipment, Fasteners, Standardization. General rules, Extraction and processing of petroleum and natural gas, Domestic, commercial and industrial heating appliances, Non-destructive testing, Physics. Chemistry, Fertilizers, Electric road vehicles, Coals, Paper production processes, Pharmaceutics, Materials for aerospace construction, Earthworks. Excavations. Foundation construction. Underground works, Test conditions and procedures in general, Lubricants, industrial oils and related products, Meat, meat products and other animal produce, Measurement of volume, mass, density, viscosity, Packaging and distribution of goods in general, Compressors and pneumatic machines.

Group Standards of the People's Republic of China, transient plasmid

T/TDSTIA 005-2019 High-quality ultra-high temperature instant sterilized milk
T/CSPSTC 56-2020 Technical specification for ahead geological prediction of tunnel transient electromagnetic method
T/TDSTIA 012-2019 Technical specifications for high-quality ultra-high temperature instant sterilized milk processing technology
T/NJ 1181-2019 Granular biomass hot air furnace
T/JLLHXH 003-2020 Jilin Yuanlixiang high quality rice
T/JLLHXH 004-2020 Jilin Changlixiang high quality rice
T/ZJSAE 007-2022 Clunk sound quality measurement and evaluation specification of electric drive system
T/CAREI 004-2023 Biomass pellets for clean heating
T/NAIA 078-2021 Coal-based granular activated carbon for air purification
T/CAB 0205-2022 Lipid Nanoparticle-formulated mRNA Sterile Preparations
T/JSAMIA 008-2019 The numerical control biomass particle hot-blast stove of air supply type
T/SDQE 010-2020 Taishan Quality Thermoplastic Elastomer Granules (TPV)
T/SDQE 012-2021 Taishan quality powder material transport semi-trailer
T/NJ 1429-2023 Standards for quality evaluation of peppercorn curing machines
T/SHPPA 019-2023 Guidance for the manufacturing quality management of plasmids used in the production of Immune cell therapy products
T/NJ 1430-2023 Standards for quality evaluation of pepper fresh fruit threshing machines
T/HHACA 017-2021 High-quality agricultural products of Heilongjiang Province Wuchang long-grain fragrant rice
T/HHACA 016-2021 High-quality agricultural products of Heilongjiang Province Acheng long-grain fragrant rice
T/CECS 1144-2022 Technical specification for the application of cement-based particle-mixed lightweight board
T/CAS ES101706001-2022 Rules for quality grading and evaluating of industrial products—Corrosion inhaibitor for acidizing
T/HHACA 015-2021 High-quality agricultural products of Heilongjiang Province Jiansanjiang long-grain fragrant rice
T/SDAS 309-2021 Technical regulations for the whole process quality control of summer maize grain harvesting by machine
T/ZZXJX 099-2021 Technical specification for application of autoclaved ceramsite concrete lightweight wall panels
T/CSAE 58-2017 Test method for average grain size of non-quenched and tempered steel and its products
T/CSES 25-2021 Granular coal based activated carbon for ultra low emission of flue gas from iron and steel industry
T/CICEIA /CAMS24-2021 Diesel engine-Particulate filter-Product quality grading specification
T/SDAS 620-2023 Determination method of lutein and zeaxanthin in corn kernels
T/NJ 1431-2023 Standards for quality evaluation of peppercorn ripening steam generator operations
T/SHSYCXH 10-2022 Detection of supercoiled plasmid DNA —Capillary gel electrophoresis method
T/NAIA 079-2021 Coal-based granular activated carbon test method for denitrification determination of denitrification rate
T/SCGS 313004-2023

Professional Standard - Water Conservancy, transient plasmid

SL 07-1989 Instantaneous suspended sediment sampler

Korean Agency for Technology and Standards (KATS), transient plasmid

KS M 3938-2017 Wood pellets
KS I ISO 11508-2009(2014) Soil quality－Determination of particle density
KS I ISO 11508:2009 Soil quality－Determination of particle density
KS M ISO 10376:2022 Pulps — Determination of mass fraction of fines
KS I 2004-2005 Air quality-Particle size fraction definitions for health-related sampling
KS H ISO 520-2009(2019) Cereals and pulses－Determination of the mass of 1 000 grains
KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS I ISO 11277:2005 Soil quality－Determination of particle size distribution inmineral soil material(Method by sieving and sedimentationfollowing removal of soluble salts, organic matter and carbonates)
KS H ISO 11050:2009 Wheat flour and durum wheat semolina－Determination of impurities of animal origin
KS R ISO 16183-2009(2019) Heavy duty engines－Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
KS I ISO 7708-2010(2016) Air quality－Particle size fraction definitions for health-related sampling
KS I 2004-2005(2010) Air quality－Particle size fraction definitions for health-related sampling
KS R ISO 16183:2009 Heavy duty engines-Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
KS I ISO 10473:2010 Ambient air－Measurement of the mass of particulate matter on a filter medium－Beta-ray absorption method
KS M 1429-2004(2010) Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS I ISO 10473:2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
KS B ISO 9934-2:2007 Non-destructive testing－Magnetic particle testing－Part 2：Detection media
KS I ISO 9096:2009 Stationary source emissions－Manual determination of mass concentration of particulate matter
KS I ISO 7708:2010 Air quality－Particle size fraction definitions for health-related sampling
KS M 1429-2013 Determination of the specific surface area of media(pelletized) - Gas adsorption method
KS I ISO 7708:2021 Air quality — Particle size fraction definitions for health-related sampling
KS M 1425-2004(2010) Testing method for particle size distribution of palletized media by sieving
KS B ISO 8178-11:2008 Reciprocating internal combustion engines－Exhaust emission measurement－Part 11：Test bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
KS H ISO 11052:2009 Durum wheat flour and semolina-Determination of yellow pigment content
KS M ISO 12984:2004 Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of particle size distribution
KS M 1425-2013 Testing method for particle size distribution of palletized media by sieving
KS M ISO 12984-2004(2019) Carbonaceous materials used in the production of aluminium－Calcined coke－Determination of particle size distribution
KS H ISO 11050-2009(2019) Wheat flour and durum wheat semolina－Determination of impurities of animal origin
KS B ISO 8178-11-2008(2018) Reciprocating internal combustion engines－Exhaust emission measurement－Part 11：Test bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under tra

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, transient plasmid

GB/T 18481-2001 Power quality Temporary and transient overvoltages
GB/T 7701.3-2008 Granlar activated carbon from coal.Granular activated carbon from coal for catalyst carrier
GB/T 7701.1-2008 Granular activated carbon from coal.Granular activated carbon from coal for gas adsorption
GB/T 7701.2-2008 Granlar activated carbon from coal.Granular activated carbon from coal for water treatment
GB/T 7702.2-1997 Standard test method for granular activated carbon from coal--Determination of particle size
GB/T 26615-2011 Quality grading of the princes-feather(Amaranthus hypochondriacus L.) seeds
GB/T 7701.1-1997 Granular activated carbon from coal for desulfurization
GB/T 7701.6-1997 Granular activated carbon from coal for protection
GB/T 7701.4-1997 Granular activated carbon from coal for the treatment of water
GB/T 7701.5-1997 Granular activated carbon from coal for air purification
GB/T 7701.7-1997 Granular activated carbon from coal for high adsorption performance
GB/T 13803.1-1999 Wooden granular activated carbon for refining of sodium glutamate
GB/T 30201-2013 Granular coal-based activated carbon for desulfurization and denitration
GB/T 7701.2-1997 Granular activated carbon from coal for solvent recovery
GB/T 7701.3-1997 Granular activated carbon from coal for catalyst carrier
GB/T 30202.2-2013 Test method for granular coal-based activated carbon for desulfurization and denitration process.Part 2 : Particle size
GB/T 42306-2023 Classification, properties and packaging of cork pellets and cork powder
GB/T 5494-1985 Inspection of grain and oilseeds--Methods for determination of foreign matter and unsound kernels
GB/T 9802-1988 Air quality--Determination of total suspended particulates--Gravimetric method
GB/T 7702.15-2008 Test method for granular activated carbon from coal.Determination of ash content
GB/T 7702.3-1997 Standard test method for granular activated carbon from coal--Determination of hardness
GB/T 12496.2-1999 Test methods of wooden activated carbon-Determination of particle size distribution
GB/T 7702.15-1997 Standard test method for granular activated carbon from coal--Determination of ash content
GB/T 7702.3-2008 Test method for granular activated carbon from coal-Determination of hardness
GB 51138-2015 Specifications for construction and quality acceptance of urea prilling tower engineering
GB/T 7702.1-1997 Standard test method for granular activated carbon from coal--Determination of moisture content
GB/T 7702.16-1997 Standard test method for granular activated carbon from coal--Determination of pH value
GB/T 7702.17-1997 Standard test method for granular activated carbon from coal--Determination of floatation ratio
GB/T 7702.9-1997 Standard test method for granular activated carbon from coal--Determination of ignition temperature
GB/T 7702.9-2008 Test method for granular activated carbon from coal.Determination of ignition temperature
GB/T 7702.5-1997 Standard test method for granular activated carbon from coal--Determination of water absorption
GB/T 7702.20-1997 Standard test method for granular activated carbon from coal--Determination of pore volume
GB/T 5494-2008 Inspection of grain and oils.Determination of foreign matter and unsound kernels of grain and oilseeds
GB/T 7702.14-2008 Test method for granular activated carbon from coal.Determination of sulphur capacity
GB/T 12004.1-1989 Determination of impurities particles number in polyvinyl chloride paste resins
GB/T 7702.7-1997 Standard test method for granular activated carbon from coal--Determination of iodine number
GB/T 7702.21-1997 Standard test method for granular activated carbon from coal--Determination of specific surface area
GB/T 7702.10-1997 Standard test method for granular activated carbon from coal--Determination of service life
GB/T 7702.7-2008 Test method for granular activated carbon from coal.Determination of iodine number
GB/T 7702.4-1997 Standard test method for granular activated carbon from coal--Determination of apparent density
GB/T 8190.11-2009 Reciprocating internal combustion engines-Exhaust emission measurement-Part11:Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
GB/T 7702.14-1997 Standard test method for granular activated carbon from coal--Determination of saturated sulphur capacity
GB/T 7702.22-1997 Standard test method for granular activated carbon from coal--Determination of breakthrough sulphur capacity
GB/T 7702.8-2008 Test method for granular activated carbon from coal.Determination of phenol adsorption
GB/T 7702.8-1997 Standard test method for granular activated carbon from coal--Determination of phenol adsorption
GB/T 21992-2008 Polyvinyl chloride resins for paste.Determination of number of impurities particles and foreign particles
GB/T 7702.18-2008 Test method for granular activated carbon from coal.Determination of caramel adsorption
GB/T 9348-2008 Plastics. Poly(vinyl chloride) resins. Determination of number of impurities and foreign particles
GB/T 7702.18-1997 Standard test method for granular activated carbon from coal--Determination of caramel adsorption
GB/T 7702.6-1997 Standard test method for granular activated carbon from coal--Determination of methylene blue adsorption
GB/T 17665-1999 Test method of wooden granular activated carbon adsorption to CCI4 vapor
GB/T 7702.6-2008 Test method for granular activated carbon from coal.Determination of methylene blue adsorption
GB/T 13277.8-2023 Compressed air part 8: Methods of measurement of mass concentration of solid particles

Taiwan Provincial Standard of the People's Republic of China, transient plasmid

CNS 10990-1998 Method of test for lightweight particles in aggregate
CNS 14779-2003 Method of test for the particle cylindrical crushing strength of lightweight coarse aggregates
CNS 14826-2004 Lightweight aggregates for insulating concrete
CNS 3691-1998 Lightweight aggregates for structural concrete
CNS 1163-1986 Method of Test for Unit Weight and Voids in Aggregate
CNS 11976-1987 2
CNS 13419-1994 6

Professional Standard - Non-ferrous Metal, transient plasmid

YS/T 412-2014 Cemented carbide pellets
YS/T 412-1999 Cemented carbide pellets

Professional Standard - Forestry, transient plasmid

LY/T 2384-2014 Wood based pellet for fuel

CZ-CSN, transient plasmid

CSN 72 4820-1958
CSN 72 6122-1992 Refractory masonry. Qranulated basic materials. Quality

American Society of Mechanical Engineers (ASME), transient plasmid

ASME PTC 21-1991 Particulate matter collection equipment
ASME PTC 28-1965 Determining the properties of fine particulate matter
ASME PTC 38-1980 Determining the Concentration of Particulate Matter in a Gas Stream

IT-UNI, transient plasmid

RU-GOST R, transient plasmid

GOST 275-1956 Groats. Methods for determination of quality
GOST R ISO 12984-2015 Carbonaceous materials used in the production of aluminium. Calcined coke. Determination of particle size distribution
GOST ISO 520-2014 Cereals and pulses. Determination of the mass of 1000 grains
GOST R ISO 9096-2006 Stationary source emissions. Manual determination of mass concentration of particulate matter
GOST 13204-1991 Seeds of stone and achene trees species. Specifications
GOST 21216.4-1993 Clay raw materials. Method for determination of coarse-grained inclusions
GOST R 25645.165-2001 Solar energetic particles. Probabilistic model for proton fluxes
PNST 254-2017 Russian system of quality. Comparative testing of rice groats
GOST R ISO 16183-2013 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
GOST 19728.20-2001 Talc and talcomagnesite. Method for determination of granularity
GOST 33838-2016 Products of grain processing. Immunoassay method for the determination of gluten
GOST R 59535-2021 Heavy-weight and fine-grained dispersed-reinforced concretes with steel fiber. Specifications
GOST 19728.20-1974 Talc and talcmagnesite. Method for determination of granularity
GOST R ISO 7708-2006 Air quality. Particle size fraction definitions for health-related sampling
GOST R 55547-2013 Solid biofuels. Fuel quality assurance. Part 6. Nonwood pelles for non-industrial use
GOST ISO 605-2013 Pulses. Determination of impurities, size, foreign, odours, insects, and species and variety. Test methods
GOST R ISO 11412-2014 Carbonaceous materials for the production of aluminium. Calcined coke. Determination of water content
GOST 31466-2012 Products of processed poultry meat. Methods of determination of mass fractions of calcium and dimensions and mass fraction of bond particles
GOST R 53599-2009 Products of processed poultry meat. Methods of determination of mass fractions of calcium and dimensions and mass fraction of bond particles
GOST ISO 8178-11-2015 Reciprocating internal combustion engines. Exhaust emission measurement. Part 11. Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
GOST R 50183-1992 Plastics. Polyvinylchloride resines. Determination of number of impurites and foreign particles

British Standards Institution (BSI), transient plasmid

BS ISO 14411-2:2020 Preparation of particulate reference materials - Polydisperse spherical particles
19/30380724 DC Preparation of particulate reference materials — Part 2: Polydisperse spherical particles. Part 2. Polydisperse spherical particles
BS 7755-5.3:1998 Soil quality - Physical methods - Determination of particle density
BS EN ISO 520:2010 Cereals and pulses. Determination of the mass of 1000 grains
BS ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
BS ISO 10143:2014 Carbonaceous materials for the production of aluminium. Calcined coke for electrodes. Determination of the electrical resistivity of granules
BS ISO 11704:2010 Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method
PD ISO/TS 14411-1:2017 Preparation of particulate reference materials. Polydisperse material based on picket fence of monodisperse spherical particles
BS ISO 11050:2020 Tracked Changes. Wheat flour and durum wheat semolina. Determination of impurities of animal origin
BS ISO 12500-3:2009 Filters for compressed air - Test methods - Particulates
BS EN ISO 11508:2017 Tracked Changes. Soil quality. Determination of particle density
BS ISO 16183:2003 Heavy duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
BS ISO 16183:2002 Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
BS ISO 11277:2010 Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
BS ISO 11277:2020 Tracked Changes. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS EN 150014:1997 Harmonized system of quality assessment for electronic components - Blank detail specification: Thyristor diodes, transient overvoltage suppressors
BS EN 150014:1995 Harmonized system of quality assessment for electronic components. Blank detail specification: Thyristor diodes, transient overvoltage suppressors
BS EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
BS EN 14907:2005(2010) Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
PD CEN ISO/TS 19590:2019 Nanotechnologies. Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
BS 1438:2004 Aggregates - Single-sized aggregates for use as a medium in biological percolating filters
BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
BS ISO 9912-4:2018 Agricultural irrigation equipment. Filters for microirrigation. Granulated media filters
18/30332191 DC BS ISO 11277. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS EN 15238:2006 Soil improvers and growing media — Determination of quantity for materials with particle size greater than 60 mm
BS EN 14530:2004(2009) Workplace atmospheres - Determination of diesel particulate matter - General requirements
BS EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
BS EN 15238:2007 Soil improvers and growing media. Determination of quantity for materials with particle size greater than 60 mm
BS EN ISO 11052:2006 Durum wheat flour and semolina - Determination of yellow pigment content
BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
23/30456345 DC BS ISO 11277 AMD 1. Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
BS EN ISO 29463-3:2018 High-efficiency filters and filter media for removing particles in air. Testing flat sheet filter media
BS DD CEN/TS 15439:2006 Biomass gasification — Tar and particles in product gases — Sampling and analysis
BS DD CEN/TS 15439:2007 Biomass gasification. Tar and particles in product gases Sampling and analysis
BS EN 14902:2005 Ambient air quality - Standard method for the measurement of Pb, Cd, AS, and Ni in the PM 10 fraction of suspended particulate matter

Japanese Industrial Standards Committee (JISC), transient plasmid

JIS Z 8822:2001 Determination of particle size distribution by the mass of sediment-particles in liquid
JIS B 7954:2001 Automatic monitors for suspended particulate matter in ambient air
JIS R 2652:1991 Testing method for grain size of light weight castable refractories
JIS B 7954:1988 Automatic moniters for suspended particulate matter in ambient air
JIS A 1143:2018 Method of test for content of floating particles in light weight coarse aggregate
JIS A 1143:2007 Method of test for content of floating particles in light weight coarse aggregate
JIS Z 2320-2:2007 Non-destructive testing -- Magnetic particle testing -- Part 2: Detection media
JIS B 8008-11:2008 Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
JIS K 6737:1999 Plastics -- Polyvinyl chloride resins -- Determination of number of impurities and foreign particles
JIS A 1126:2007 Method of test for content of soft particles in coarse aggregate by scratching
JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements

VN-TCVN, transient plasmid

TCVN 6863-2001 Soil quality.Determination of particle density
TCVN 6862-2012 Soil quality.Determination of particle size distribution in mineral soil material.- Method by sieving and sedimentationMethod by sieving and sedimentation
TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter
TCVN 6753-2000 Air quality.Particle size fraction definitions for health-related sampling
TCVN 6852-11-2009 Reciprocating internal combustion engines.Exhaust emission measurement.Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions

HU-MSZT, transient plasmid

Xinjiang Provincial Standard of the People's Republic of China, transient plasmid

DB65/T 3010-2009 Quality grading of the princes.feather(Amaranthus hypochondriacus L.)seeds

Association Francaise de Normalisation, transient plasmid

NF X31-554:2014 Soil quality - Determination of particle density
NF X31-516:2007 Qualité du sol - Fractionnement granulodensimétrique des matières organiques particulaires du sol dans l'eau
NF X45-403:1996 Granular filtering media. Acceptance criteria.
NF X31-107:2003 Qualité du sol - Détermination de la distribution granulométrique des particules du sol - Méthode à la pipette
NF X31-554:1998 Soil quality. Determination of particle density.
NF X31-554*NF EN ISO 11508:2017 Soil quality - Determination of particle density
NF EN ISO 11508:2017 Qualité du sol - Détermination de la masse volumique des particules
XP CEN ISO/TS 19590:2019 Nanotechnologies - Distribution granulométrique et concentration de nanoparticules inorganiques en milieu aqueux par spectrométrie de masse à plasma induit en mode particule unique
NF V03-779:2020 Durum wheat (Triticum durum Desf.) - Determination of percentage of mitadine grains - Method with grain cutter
NF T51-046*NF EN ISO 1265:2007 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles.
NF V03-718:1994 Wheat flour and {durum} wheat semolina. Determination of impurities of animal origin.
NF V03-769:2011 Cereals and pulses - Determination of the mass of 1000 grains.
NF V03-702*NF EN ISO 520:2011 Cereals and pulses - Determination of the mass of 1000 grains
NF X45-401:1992 Granular filtering media. Methods of test. Physical and chemical characteristics.
NF X45-402:1996 Granular filtering media. Test methods. Functional characteristics.
NF EN ISO 520:2011 Céréales et légumineuses - Détermination de la masse de 1000 grains
NF L06-825:2010 Aerospace series - Blast media - Grit cast steel shot.
NF T51-003:1977 DETERMINATION OF APPARENT DENSITY OF MOULDING MATERIALS.
NF V03-724*NF EN ISO 11052:2006 Durum wheat flour and semolina - Determination of yellow pigment content.
NF V03-724:1994 {durum} wheat flour and semolina. Determination of yellow pigment content.
NF ISO 11277:2020 Qualité du sol - Détermination de la répartition granulométrique de la matière minérale des sols - Méthode par tamisage et sédimentation
NF ISO 10473:2000 Air ambiant - Mesurage de la masse des matières particulaires sur un milieu filtrant - Méthode par absorption de rayons bêta
XP T16-401*XP CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
NF X43-040*NF ISO 10473:2000 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method
NF X31-559*NF ISO 11277:2020 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
NF ISO 8573-4:2019 Air comprimé - Mesurage des polluants - Partie 4 : teneur en particules
NF EN 15428:2007 Amendements du sol et supports de culture - Détermination de la répartition granulométrique
NF EN ISO 3093:2010 Blés tendres, seigles et leurs farines, blés durs et leurs semoules - Détermination de l'indice de chute selon Hagberg-Perten
NF X34-102-6*NF EN 15234-6:2012 Solid biofuels - Fuel quality assurance - Part 6 : non-woody pellets for non-industrial use
NF EN ISO 16624:2020 Farine de blé tendre et semoule de blé dur - Détermination de la couleur par colorimétrie par réflectance diffuse
NF ISO 7708:1996 Qualité de l'air - Définitions des fractions de taille des particules pour l'échantillonnage lié aux problèmes de santé.
NF X43-100*NF ISO 7708:1996 Air quality. Particle size fraction definitions for health-related sampling.
NF EN ISO 11052:2006 Farines et semoules de blé dur - Détermination de la teneur en pigments jaunes
NF EN 15234-6:2012 Biocombustibles solides - Assurance qualité du combustible - Partie 6 : granulés non ligneux à usage non industriel
NF X43-289*NF EN 14530:2004 Workplaces atmospheres - Determination of diesel particulate matter - General requirements
NF X45-405:1996 Granular filter media. Test methods. Measurement of the cake density of a filter aid.
NF X45-404:1996 Granular filter media. Test methods. Measurement of the permeability of a filter aid.

Liaoning Provincial Standard of the People's Republic of China, transient plasmid

DB21/T 2813-2017 Working quality of corn thresher
DB21/T 2924-2018 Energy consumption limit of ring die granular biomass fuel press
DB21/T 2904-2018 Technical specifications for quality evaluation of straw pellet processing complete sets of equipment
DB21/T 3424-2021 Safety Technical Guidelines for Retrofitting Coal-fired Biomass Pellet Boilers

国家市场监督管理总局、中国国家标准化管理委员会, transient plasmid

GB/T 40170-2021 Principle of plasmid extraction and testing
GB/T 41185-2021 Specification of preparation and quality control of reference materials for DNA detection of aquatic animals pathogen—Plasmid
GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
GB/T 5494-2019 Inspection of grain and oils—Determination of foreign matter and unsound kernels of grain and oilseeds

Professional Standard - Agriculture, transient plasmid

药典15-2013 Jinlida granule quality standard
NY/T 1575-2007 Rules for quality testing and grading of forage pellets
药典63-2014 Quality Standards for Xiaoer Zengshi Granules
NY/T 503-2015 Operating quality for single seed drills (precision drills)
NY/T 1014-2006 Technial specification of quality evaluation for Thresher
229药典三部-2010 Appendix IX IXG Plasmid Loss Rate Inspection Method
286药典三部-2020 Bioassay 3406 Plasmid Loss Rate Check
NY/T 503-2002 Operating quality of single(precision) seeder for intertilled crops
242药典四部-2015 3400 Bioassay 3406 Plasmid loss rate inspection method
235药典四部-2020 3400 Bioassay 3406 Plasmid loss rate inspection method
NY/T 1930-2010 Technical specification of quality evaluation for straw pellets to suppress machinery
261药典三部-2015 Bioassay 3406 Plasmid Loss Rate Inspection Method General 107
GB/T 14039-1993 Code of solid particle pollution level of hydraulic system working medium
农业部2630号公告-13-2017 Technical Specifications for Plasmid DNA Standard Substance Determination of Components of Transgenic Plants and Their Products
NY/T 1549-2007 Quality and technique appraising standard for complete set of equipment of processing biological granulated fertilizer

Jilin Provincial Standard of the People's Republic of China, transient plasmid

DB22/T 2028-2014 Working quality of corn thresher
DB22/T 2423-2015 Particle Distribution Determination of Peat, Substrates and Soil Conditioners

Professional Standard - Machinery, transient plasmid

JB/T 51194-1999 Thresher product quality classification
JB/T 53139-1999 Product quality classification of dregs granulator
JB/T 53587-1999 On-site mixing of granular ammonium oil explosives vehicle product quality grading
JB/T 51072-1999 Product quality grading for pellet feed presses (for internal use)

American Society for Testing and Materials (ASTM), transient plasmid

ASTM B930-03(2017) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2021) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM E872-82(2006) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
ASTM C123-04 Standard Test Method for Lightweight Particles in Aggregate
ASTM C123/C123M-11 Standard Test Method for Lightweight Particles in Aggregate
ASTM E872-82(1998) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
ASTM E872-82(2019) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
ASTM E872-82(2013) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels
ASTM E1772-95 Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM E1772-95(2001) Standard Test Method for Particle Size Distribution of Chromatography Media by Electric Sensing Zone Technique
ASTM D1937-03 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
ASTM D1937-98e1 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
ASTM D1937-98 Standard Test Method for Carbon Black, Pelleted-Mass Strength
ASTM D1937-12 Standard Test Method for Carbon Black, Pelleted—Mass Strength
ASTM C123/C123M-14 Standard Test Method for Lightweight Particles in Aggregate
ASTM D1937-23 Standard Test Method for Carbon Black, Pelleted—Mass Strength
ASTM D1937-21 Standard Test Method for Carbon Black, Pelleted—Mass Strength
ASTM D1937-13 Standard Test Method for Carbon Black, Pelletedmdash;Mass Strength
ASTM D7619-10 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7619-12 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D7619-12b Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
ASTM D6786-15 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
ASTM D1937-05 Standard Test Method for Carbon Black, Pelleted8212;Mass Strength
ASTM F24-04 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
ASTM D1890-15(2017) Standard Test Method for Beta Particle Radioactivity of Water
ASTM E2780-10 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
ASTM D1937-18 Standard Test Method for Carbon Black, Pelleted—Mass Strength
ASTM E871-82(2019) Standard Test Method for Moisture Analysis of Particulate Wood Fuels
ASTM B390-92(2006) Standard Practice for Evaluating Apparent Grain Size and Distribution of Cemented Tungsten Carbides
ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM E1534-93(2006) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM E1534-93(2013) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM E1534-93(2019) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels
ASTM E1288-89(1994) Standard Test Method for The Durability of Biomass Pellets (Withdrawn 2003)
ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
ASTM D6494-99 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM B930-03 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM D6494-99(2004)e1 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
ASTM B930-03(2008) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM B930-03(2012) Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)
ASTM D4860-08 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
ASTM E873-82(2006) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
ASTM E873-82(2013) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
ASTM E873-82(2019) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels

CL-INN, transient plasmid

INDITECNOR 30-37ch-1954

National Metrological Technical Specifications of the People's Republic of China, transient plasmid

JJF 2060-2023 Production of Sub-micron and Nanometer Particle Size Reference Materials

Professional Standard - Energy, transient plasmid

NB/T 34026-2015 Biomass pellets burners

BR-ABNT, transient plasmid

ABNT MB-28-1969

CU-NC, transient plasmid

NC 26-116-1985 Drugs. Granulars. General Quality Specifications
NC 43-18-1986 Artificial Wood. Partiole Board Quality Specifications
NC 26-116-2-1985 Drugs. "Brocalc in", Granulate. Quality Specifications
NC 44-04-1985 Ores. Granular Nickel Oxide Quality Specifications
NC 26-116-1-1985 Drugs. "Citrogal" Granular Quality Specifications.
NC 88-47-1984 Tobacco and Tobacco Products Granulated Black Cut Tcbacco Quality Specifications

American Water Works Association (AWWA), transient plasmid

AWWA B100-2001 Granular Filter Material ANSI/AWWA B100-01

Hebei Provincial Standard of the People's Republic of China, transient plasmid

DB13/T 2080-2014 Biomass Pellet Fuel Burner
DB13/T 2034-2014 Quality management regulations for granulated blast furnace slag powder production enterprises
DB13/T 2035-2014 Specifications for laboratory quality management of granulated blast furnace slag powder production enterprises

International Organization for Standardization (ISO), transient plasmid

ISO/TR 7708:1983 Air quality; Particle size fraction definitions for health-related sampling
ISO 14411-2:2020 Preparation of particulate reference materials — Part 2: Polydisperse spherical particles
ISO 11508:2017 Soil quality - Determination of particle density
ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
ISO 520:2010 Cereals and pulses - Determination of the mass of 1000 grains
ISO/TS 4807:2022 Reference materials for particle size measurement — Specification of requirements
ISO 11277:1998 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
ISO 11050:1993 Wheat flour and durum wheat semolina; determination of impurities of animal origin
ISO/CD TS 6818 Traditional Chinese medicine — Test method for moxa floss quality — concentration of waste particles
ISO 1997:1992 Granulated cork and cork powder; classification, properties and packing
ISO 16183:2002 Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
ISO 8335:1987 Cement-bonded particleboards; Boards of Portland or equivalent cement reinforced with fibrous wood particles
ISO 10473:2000 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method
ISO/TS 19590:2017 Nanotechnologies — Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
ISO 9934-2:2002 Non-destructive testing - Magnetic particle testing - Part 2: Detection media
ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
ISO 7708:1995 Air quality - Particle size fraction definitions for health-related sampling
ISO 9934-2:2015 Non-destructive testing - Magnetic particle testing - Part 2: Detection media
ISO 23419:2021 Traditional Chinese medicine — General requirements for manufacturing procedures and quality assurance of granules
ISO 8178-11:2006 Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bed measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions
ISO 11277:2020/DAmd 1 Soil quality — Determination of particle size distribution in mineral soil material — Method by sieving and sedimentation — Amendment 1
ISO 11052:1994 Durum wheat flour and semolina - Determination of yellow pigment content
ISO 1265:2007 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles

Indonesia Standards, transient plasmid

SNI 7714-2011
SNI ASTM C123:2012 Test methods for lightweight particles in aggregate
SNI 7698-2011
SNI 7429-2008
SNI 7804-2013
SNI 7637-2011

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., transient plasmid

ASHRAE QC-06-039-2006 VOC Removal Performance of Pellet/Granular-Type Sorbent Media- Experimental Results

Professional Standard - Building Materials, transient plasmid

JC/T 2214-2014 Reinforced ceramisite concrete lightweight wallboard
JC/T 804-1996 Lightweight and refractory ceramsite concrete block for cement kiln lining
JC/T 804-1987 Lightweight and refractory ceramsite concrete block for cement kiln lining

SE-SIS, transient plasmid

SIS SS 02 71 06-1990 Geotechnical tests — Mineral soils — Grain size fractions
SIS SS-ISO 1265:1987 Plastics - Polyvinyl chloride resins - Determination of number of impurities and foreign particles

European Committee for Standardization (CEN), transient plasmid

EN ISO 11508:2017 Soil quality - Determination of particle density
EN ISO 520:2010 Cereals and pulses - Determination of the mass of 1000 grains (ISO 520:2010)
EN ISO 11508:2014 Soil quality - Determination of particle density
EN ISO 2010:2011 Slotted raised countersunk head screws - Product grade A
EN 14907:2005 Ambient air quality Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
EN 15234-6:2012 Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use
EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements
EN ISO 11052:2006 Durum wheat flour and semolina - Determination of yellow pigment content (ISO 11052:1994)
EN ISO 1265:1997 Plastics - Polyvinyl Chloride Resins - Determination of Number of Impurities and Foreign Particles ISO 1265: 1979
EN ISO 1265:2007 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007)

Danish Standards Foundation, transient plasmid

DS/ISO 11508:1999 Soil quality - Determination of particle density
DS/ISO 11277:2009 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation
DS/EN 15428:2007 Soil improvers and growing media - Determination of particle size distribution
DS/EN 14907:2005 Ambient air quality - Reference gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
DS/EN 15234-6:2012 Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use
DS/EN ISO 1265:2007 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles

KR-KS, transient plasmid

KS M ISO 10376-2022 Pulps — Determination of mass fraction of fines
KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS I ISO 10473-2020 Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
KS I ISO 7708-2021 Air quality — Particle size fraction definitions for health-related sampling

German Institute for Standardization, transient plasmid

DIN EN ISO 11508:2014 Soil quality - Determination of particle density (ISO 11508:1998); German version EN ISO 11508:2014
DIN EN ISO 11508:2018-04 Soil quality - Determination of particle density (ISO 11508:2017); German version EN ISO 11508:2017
DIN 53583:2007-06 Testing of pigments - Determination of fines content and of loss in mass by abrasion of pelletized carbon black pigments
DIN EN 15585:2008 Cereals and cereal products - Durum wheat (T. durum Desf.) - Determination of percentage of mitadine grains and calculation of percentage of vitrious grains; German version EN 15585:2008
DIN EN ISO 1265:2007 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007) English version of DIN EN ISO 1265:2007-05
DIN ISO 11508:2002 Soil quality - Determination of particle density (ISO 11508:1998)
DIN EN ISO 520:2011-03 Cereals and pulses - Determination of the mass of 1000 grains (ISO 520:2010); German version EN ISO 520:2010
DIN 51938:2015-09 Testing of carbonaceous materials - Determination of particle size distribution by sieving - Solid matters
DIN ISO 10473:2002-08 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000)
DIN ISO 10473:2002 Ambient air - Measurement of the mass of particulate matter on a filter medium - Beta-ray absorption method (ISO 10473:2000)
DIN CEN ISO/TS 19590:2019-11*DIN SPEC 19286:2019-11 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry (ISO/TS 19590:2017); German version CEN ISO/TS 19590:2019
DIN 58355-4:2005 Membrane filters - Part 4: Testing for particulate matter release
DIN EN 15428:2007-11 Soil improvers and growing media - Determination of particle size distribution; German version EN 15428:2007
DIN EN 15234-6:2012-04 Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use; German version EN 15234-6:2012
DIN EN ISO 9934-2:2003 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2002); German version EN ISO 9934-2:2002
DIN EN ISO 11052:2006 Durum wheat flour and semolina - Determination of yellow pigment content (ISO 11052:1994); German version EN ISO 11052:2006
DIN EN 14907:2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter; English version of DIN EN 14907
DIN EN 14530:2004 Workplace atmospheres - Determination of diesel particulate matter - General requirements; German version EN 14530:2004
DIN ISO 7708:1996 Air quality - Particle size fraction definitions for health-related sampling (ISO 7708:1995)
DIN 51813:1989 Determination of solid matter content of lubricating greases (particle sizes above 25 m)
DIN EN ISO 1265:2007-05 Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007); German version EN ISO 1265:2007
DIN ISO 7708:1996-01 Air quality - Particle size fraction definitions for health-related sampling (ISO 7708:1995)

Yunnan Provincial Standard of the People's Republic of China, transient plasmid

DB53/T 948-2019 Biomass Pellet Fuels for Tobacco Part 2: Quality Requirements
DB5305/T 67-2021 Technical Regulations for Biomass Pellet Fuel Production
DB53/T 870-2018 Intensive Barn Biomass Pellet Fuel Combustion Device
DB53/T 949-2019 Tobacco biomass pellet fuel baking operation management regulations
DB53/T 149.9-2005 Inspection and Determination of Defective Beans and Impurities in Arabica Coffee
DB53/T 869.1-2018 Biomass Pellet Fuels for Tobacco Part 1: Production Technical Regulations
DB53/T 871-2018 Technical regulations for tobacco leaf curing with biomass pellet fuel in intensive curing barn

Jiangsu Provincial Standard of the People's Republic of China, transient plasmid

DB32/T 4258-2021
DB3213/T 1014-2019 Technical regulations for high-quality long-grain indica rice production
DB32/T 4195-2021 Operating procedures for biomass pellet hot blast stove
DB32/T 3217-2017 Highway engineering EPS granular mixed light material embankment technical specification

Shanxi Provincial Standard of the People's Republic of China, transient plasmid

DB14/T 965-2014 Small biomass pellet fuel molding machine

国家林业局, transient plasmid

LY/T 2776-2016 Comprehensive energy consumption of wood pellet fuel production

Military Standard of the People's Republic of China-General Armament Department, transient plasmid

GJB/J 5126-2002 Specification for polystyrene particle size reference materials

未注明发布机构, transient plasmid

JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
BS ISO 16183:2002(2003) Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
BS EN 150014:1997(2000) Harmonized system ofquality assessment for electronic components Blank detail specification : Thyristor diodes, transient overvoltage suppressors
BS EN 150015:1993(2000) Specification for Harmonized system of quality assessment for electronic components — Blank detail specification — Unidirectional transient overvoltage suppressor diodes
BS EN 15428:2007(2009) Soil improvers and growing media — Determination of particle size distribution

PL-PKN, transient plasmid

PN C04061-1965 Pe?roleum produc?s Foreign par?icles in greases determina?ion by microscopical me?hod
PN C04094-1971 Petroleum products De?ermino?ion of foreign par?icles by ?he Budaroys method
PN P50111-1988 Paper and paperboard etermination ot" the number t' contamination by iron and copper particles
PN R74017-1968 Cereals and pulses Determination of ?he mass of 1000 grains
PN B03262-1989 Concrete bins for storing granular materials and silags Design rules

IN-BIS, transient plasmid

Inner Mongolia Provincial Standard of the People's Republic of China, transient plasmid

DB15/T 1492-2018 Regulations for Quality Inspection of Pelletized Forest Tree Seeds
DB15/T 2668-2022 Quality and hygiene inspection and grading of alfalfa granules

Gansu Provincial Standard of the People's Republic of China, transient plasmid

DB62/T 2975-2019 Working quality of corn grain combine harvester

YU-JUS, transient plasmid

JUS E.B1.201-1987 Durum wheat for milling industrl. General quality reguirements

NL-NEN, transient plasmid

NEN 5945-1990 Aggregates for concrete - Determination of lightweight partiele content

FI-SFS, transient plasmid

AASHTO - American Association of State Highway and Transportation Officials, transient plasmid

T 113-2018 Standard Method of Test for Lightweight Particles in Aggregate

Henan Provincial Standard of the People's Republic of China, transient plasmid

DB41/T 1740-2018 Quality Grading of Peony Peony Seeds for Oil

Professional Standard - Geology, transient plasmid

DZ 1.3-1984 Tungsten carbide, steel grain core drilling pipe thread
DZ/T 0184.3-1997 Geological Age Determination of Granular Zircon U-Pb Isotopes

Heilongjiang Provincial Standard of the People's Republic of China, transient plasmid

DB2312/T 078-2023 Rice (soybean) multifunctional thresher operation quality

Anhui Provincial Standard of the People's Republic of China, transient plasmid

DB34/T 433-2004 Grain threshing machine operation quality assessment method

TR-TSE, transient plasmid

TS 3528-1980 DETERMINATION OF THE PROPORTION OF LIGHTWEIGHT PARTICLES IN AGGREGATES FOR CONCRETE

ES-AENOR, transient plasmid

UNE 7 134

RO-ASRO, transient plasmid

STAS 6123/1-1973 SEEDS FOR AGRIGULTURE Determinai ion of the mass of 1000 grains
STAS 8179/2-1975 Low-density polyethylene granules General technical reauirements for quality
STAS 10762-1978 Surface agents CONDITIONED GRANULATED DETRGENTS General technical requirements for quality
STAS 7621/2-1985 NORMAL ELECTROCORUNDUM Determination of mineralogic composition and aggregate granules content

Professional Standard - Coal, transient plasmid

MT 422-1996 Coal mine dust particle size distribution determination method (mass method)

Beijing Provincial Standard of the People's Republic of China, transient plasmid

DB11/T 902-2012 Preparation and Quality Requirements of Straw Composite Pellet Feed

未注明发布机构, transient plasmid

JIS Z 8899:2023 Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles
BS ISO 16183:2002(2003) Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions
BS EN 150014:1997(2000) Harmonized system ofquality assessment for electronic components Blank detail specification : Thyristor diodes, transient overvoltage suppressors
BS EN 150015:1993(2000) Specification for Harmonized system of quality assessment for electronic components — Blank detail specification — Unidirectional transient overvoltage suppressor diodes
BS EN 15428:2007(2009) Soil improvers and growing media — Determination of particle size distribution

Society of Automotive Engineers (SAE), transient plasmid

SAE AIR4766/1-2005 Air Quality for Commercial Aircraft Cabin Particulate Contaminants
SAE AIR4766/1-2018 Air Quality for Commercial Aircraft Cabin Particulate Contaminants
SAE AMS2304B-2010 Steel Cleanliness, Special Aircraft-Quality Magnetic Particle Inspection Procedure

ESDU - Engineering Sciences Data Unit, transient plasmid

SPD-M6-2-2010 Apr.08: Coarse-Grained simulation of asphaltene-hydrocarbon containing systems
SPD-M4-3-2007 Coarse grained simulation of asphaltene-hydrocarbon containing systems.

ES-UNE, transient plasmid

UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter

Lithuanian Standards Office , transient plasmid

LST ISO 10473:2001 Ambient air. Measurement of the mass of particulate matter on a filter medium. Beta-ray absorption method
LST EN 14907-2005 Ambient air quality - Standard gravimetric measurement method for the determination of the PM2,5 mass fraction of suspended particulate matter
LST EN 15428-2007 Soil improvers and growing media - Determination of particle size distribution
LST EN 15234-6-2012 Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use
LST ISO 16183:2006 Heavy-duty engines - Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions (identical ISO 16183:2002)

AENOR, transient plasmid

UNE-ISO 10473:2005 Ambient air -- Measurement of the mass of particulate matter on a filter medium -- Beta-ray absorption method
UNE-EN 15428:2008 Soil improvers and growing media - Determination of particle size distribution
UNE-EN ISO 520:2011 Cereals and pulses - Determination of the mass of 1000 grains (ISO 520:2010)
UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE 77213:1997 AIR QUALITY. PARTICLE SIZE FRACTION DEFINITIONS FOR HEALTH-RELATED SAMPLING.
UNE-EN 15234-6:2012 Solid biofuels - Fuel quality assurance - Part 6: Non-woody pellets for non-industrial use

Association of German Mechanical Engineers, transient plasmid

VDI 2463 Blatt 1-1999 Particulate matter measurement - Gravimetric determination of mass concentration of suspended particulate matter in ambient air - General principles
VDI 2260-2003 Technical warranty for gas cleaning equipment - Particulate and gaseous matter

CEN - European Committee for Standardization, transient plasmid

CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
EN ISO 29463-3:2018 High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media

International Electrotechnical Commission (IEC), transient plasmid

ISO/TS 80004-3:2010 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects

API - American Petroleum Institute, transient plasmid

API 26-60058-1969 AIR QUALITY MONOGRAPHS Monograph #69-2 Particulates: Air Quality Criteria Based on Health Effects
API 26-60057-1969 AIR QUALITY MONOGRAPHS Monograph #69-1 Ambient Air quality Standards for Particulates-Review and Evaluation

Canadian General Standards Board （CGSB), transient plasmid

CGSB 2.11-94 1.6-CAN/CGSB-1994 Methods of Sampling and Testing Soaps and Detergents Sampling of Granular Materials

Canadian Standards Association (CSA), transient plasmid

CSA Z223.1-M1977-1977 Method for the Determination of Particulate Mass Flows in Enclosed Gas Streams R(1999)

UNKNOWN, transient plasmid

农业农村部公告第323号-8-2020

Standard Association of Australia （SAA）, transient plasmid

AS 1141.32:2008 Methods for sampling and testing aggregates - Weak particles (including clay lumps, soft and friable particles) in coarse aggregates

中国石油化工总公司, transient plasmid

SH/T 0470-1992 Determination of solid particle impurities in synthetic aviation lubricants (gravimetric method)

BE-NBN, transient plasmid

NBN C 83-265-1-1987

AT-ON, transient plasmid

ONORM A 5561-2001 Determination of settled and compacted apparent densities of powders and granulated materials

PT-IPQ, transient plasmid

E 245-1971

United States Navy, transient plasmid

NAVY MIL-PRF-17951 E-1988 DECK COVERING, LIGHTWEIGHT, NONSLIP, ABRASIVE PARTICLE COATED FABRIC, FILM, OR COMPOSITE, AND SEALING COMPOUND

ZA-SANS, transient plasmid

SANS 6241:2006 Particle size distribution of material of diameter smaller than 75 ?m in fine aggregate (hydrometer method)

农业农村部, transient plasmid

NY/T 1860.32-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 32: Particle Size Distribution