ZH
RU
ES

polarization

polarization, Total:493 items.

In the international standard classification, polarization involves: Fibre optic communications, Surface treatment and coating, Non-ferrous metals, Cutting tools, Optics and optical measurements, Electrical accessories, Components and accessories for telecommunications equipment, Iron and steel products, Corrosion of metals, Mining and quarrying, Electrical and electronic testing, Radiocommunications, Audio, video and audiovisual engineering, Astronomy. Geodesy. Geography, Resistors, Equipment for petroleum and natural gas industries, Vocabularies, Non-metalliferous minerals, Electronic components in general, Machine tools, Fasteners for aerospace construction, Construction materials, Integrated circuits. Microelectronics, Products of non-ferrous metals, Optoelectronics. Laser equipment, Coatings and related processes used in aerospace industry, Materials for aerospace construction, Testing of metals, Analytical chemistry, Electricity. Magnetism. Electrical and magnetic measurements, Physics. Chemistry, Gas and steam turbines. Steam engines, Television and radio broadcasting, Insulation, Capacitors, Geology. Meteorology. Hydrology, Aerospace electric equipment and systems, Burners. Boilers, Materials and components for railway engineering.

American National Standards Institute （ANSI), polarization

ANSI/TIA/EIA 455-193-1999 Polarization Crosstalk Test Method for Polarization-Maintaining Optical Fiber and Components
ANSI/TIA/EIA 455-201-2001 Return Loss of Connectorized Polarization-Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies
ANSI/TIA/EIA 455-192-1999 H-Parameter Test Method for Polarization-Maintaining Optical Fiber
ANSI/TIA/EIA 455-196-1999 Guideline for Polarization Mode Dispersion Measurement in Single-Mode Fiber Optic Components
ANSI/TIA/EIA 455-124-1999 Polarization-Mode Dispersion Meaurement for Single-Mode Optical Fibers by Interferometric Method
ANSI/EIA 395-1:1975 Electrolytic Capacitors for Long Life, Type 1, and General Purpose Application, Type 2, Polarized Aluminum

Military Standards (MIL-STD), polarization

DOD A-A-53036-1987 OPHTHALMOSCOPE, POLARIZING TYPE

Military Standard of the People's Republic of China-General Armament Department, polarization

GJB/J 3409-1998 Vertical polarization monopole antenna calibration procedures

VN-TCVN, polarization

TCVN 6330-1997 Sugar.Determination of polarization (ICUMSA-method)
TCVN 5876-1995 Anodizing of aluminium and its alloys.Determination of thickness of anodic oxide coatings.Non.destructive measurement by split.beam microscope

CEN - European Committee for Standardization, polarization

EN ISO 8251:2018 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
EN ISO 6581:2018 Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
EN ISO 3211:2018 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation
EN ISO 10215:2018 Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method

European Committee for Standardization (CEN), polarization

EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011)
EN ISO 7599:2018 Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium
EN ISO 3211:2010 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2010)
EN ISO 6581:2010 Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2010)
EN ISO 7599:2010 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium
EN 2101:1991 Chromic Acid Anodizing of Aluminium and Wrought Aluminium Alloys
EN 12373-15:2000 Aluminium and Aluminium Alloys - Anodizing - Part 15: Assessment of Resistance of Anodic Oxidation Coatings to Cracking by Deformation
EN ISO 2085:2018 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
EN ISO 2085:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2010)
EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)
EN 2284:1991 Sulphuric Acid Anodizing of Aluminium and Wrought Aluminium Alloys
EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2011)
EN ISO 10215:2010 Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2010)

(U.S.) Ford Automotive Standards, polarization

FORD FLTM EU-BQ 009-02-2000 SEAL TEST FOR ANODIZED ALUMINUM
FORD FLTM EU-BQ 009-03-2000 SEAL TEST FOR ANODIZED ALUMINUM
FORD FLTM BQ 007-01-2000 FORD ANODIZED ALUMINUM CORROSION TEST (F.A.C.T.)
FORD FLTM EU-BQ 010-01-2000 FILM THICKNESS MEASUREMENT FOR ANODIZED ALUMINUM
FORD FLTM BQ 010-01-2000 TEST PROCEDURES FOR ANODIZED ALUMINUM FILM THICKNESS MEASUREMENT
FORD FLTM EU-AQ 006-03-2001 DETERMINATION OF THE QUALITY OF SEALING OF ANODISED ALUMINUM
FORD FLTM EU-BQ 009-2-2000 SEAL TEST FOR ANODIZED ALUMINUM

AR-IRAM, polarization

IRAM 4019-1952

American Society for Testing and Materials (ASTM), polarization

ASTM G59-97 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G100-89(2004) Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
ASTM G100-89(2015) Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
ASTM G100-89(2010)e1 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
ASTM G5-14(2021) Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G59-97e1 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G59-97(2009) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G5-12 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM B580-79(2004) Standard Specification for Anodic Oxide Coatings on Aluminum
ASTM G100-89(1999) Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
ASTM G100-89(2021) Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
ASTM G5-14e1 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G5-14 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G59-97(2014) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G5-13e2 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G5-13 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G59-97(2003) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G59-97(2020) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G59-23 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G5-94 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G5-94(1999) Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G5-94(2004) Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G5-94(1999)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G5-13e1 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G5-94(2011)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements

Professional Standard - Petroleum, polarization

SY/T 6532-2002 The calibration method for induced polarization instrument
SY 6532-2002 Calibration method of induced polarimeter
SY/T 6973-2013 Petroleum core induced polarization potential measurement instrument
SY 6973-2013 Petroleum Rock Induced Polarization Potential Measuring Instrument

ZA-SANS, polarization

SANS 1407:2007 Anodized coatings on aluminium (for general applications)
SANS 999:2007 Anodized coatings on aluminium (for architectural applications)
SANS 6581:1980 Anodizing of aluminium and its alloys - Determination of the fastness to ultra-violet light of coloured anodic oxide coatings
SANS 3210:1983 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution
SANS 2135:1984 Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
SANS 2106:1982 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxide coatings - Gravimetric method

Korean Agency for Technology and Standards (KATS), polarization

KS B 3965-2004(2009) Single angle milling cutters with threaded holes
KS D 0247-2004 Method for making anodic polarization measurement for stainless steels
KS D 0247-2004(2019) Method for making anodic polarization measurement for stainless steels
KS D 0247-1984 Method for making anodic polarization measurement for stainless steels
KS D ISO 10216:2012 Anodizing of aluminium and its alloys-Instrumental determination of image clarity of anodic oxidation coatings-Instrumental method
KS D ISO 8994:2002 Anodized aluminium and aluminium alloys－Rating system for the evaluation of pitting corrosion－Grid method
KS F 2736-2015 Testing method for polarization resistance of reinforcing bar in concrete
KS D 8503-1995 Measurement methods of polarization resistance of copper alloy tubes for condenser
KS D 8503-2015(2020) Measurement methods of polarization resistance of copper alloy tubes for condenser
KS D 8345-2000 Test methods for image clarity of anodic oxide coatings on aluminium and aluminium alloys
KS F 2736-2005 Testing method for polarization resistance of reinforcing bar in concrete
KS F 2736-2021 Standard test method for polarization resistance of reinforcing bar in concrete
KS D 9531-2002(2012) ANODIC OXIDATION PRACTICE BY SULPHURIC ACID PROCESS ON ALUMINIUM AND ALUMINIUM ALLOYS
KS D 9530-2003(2008) Anodic oxidation practice by oxalic acid process on aluminium and aluminium alloys
KS D 8503-2015 Measurement methods of polarization resistance of copper alloy tubes for condenser
KS D 9530-1982 Anodic oxidation practice by oxalic acid process on aluminium and aluminium alloys
KS D ISO 3211:2012 Anodizing of aluminium and its alloys-Assessment of resistance of anodic oxidation coatings to cracking by deformation
KS D ISO 3211:2013 Anodizing of aluminium and its alloys－Assessment of resistance of anodic oxidation coatings to cracking by deformation
KS D ISO 8125-2007(2017) Anodizing of aluminium and its alloys－Determination of colour and colour difference of coloured anodic coatings
KS D ISO 10216-2012(2017) Anodizing of aluminium and its alloys－Instrumental determination of image clarity of anodic oxidation coatings－Instrumental method
KS D ISO 8125:2007 Anodizing of aluminium and its alloys－Determination of colour and colour difference of coloured anodic coatings
KS D ISO 2128-2011(2016) Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
KS D ISO 2128-2011(2021) Anodizing of aluminium and its alloys－Determination of thickness of anodic oxidation coatings－Non-destructive measurement by split-beam microscope
KS D ISO 10074:2012 Anodizing of aluminium and its alloys-Specification for hard anodic oxidation coatings on aluminium and its alloys
KS D ISO 10216-2012(2022) Anodizing of aluminium and its alloys－Instrumental determination of image clarity of anodic oxidation coatings－Instrumental method
KS D ISO 8994-2002(2022) Anodized aluminium and aluminium alloys－Rating system for the evaluation of pitting corrosion－Grid method
KS C IEC 61757-4-3:2021 Fibre optic sensors — Part 4-3: Electric current measurement —Polarimetric method
KS B ISO 12005:2020 Lasers and laser-related equipment — Test methods for laser beam parameters — Polarization
KS D 0269-2020 Potentiostatic polarization test method for determination of critical pitting temperature for stainless steels
KS D 8310-2001 Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-destructive measurement by split-beam microscope)
KS D 8310-1986 Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-destructive measurement by split-beam microscope)
KS D 8301-2001 Anodic oxide coatings on aluminium and aluminium alloys
KS D 8301-2001(2016) Anodic oxide coatings on aluminium and aluminium alloys
KS D 8301-2001(2021) Anodic oxide coatings on aluminium and aluminium alloys
KS D 8301-1986 Anodic oxide coatings on aluminium and aluminium alloys
KS D 8310-2001(2016) Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-dest
KS D 8310-2001(2021) Anodizing of aluminium and its alloys－Determination of mass per unit area(surface density) of anodic oxide coatings(gravimetric method) and determination of thickness of anodic oxide coatings(non-dest
KS D 0269-2009 Potentiostatic polarization test method for determination of critical pitting temperature for stainless steels

Taiwan Provincial Standard of the People's Republic of China, polarization

CNS 14111-1998 Methods of measurement for optical polarization controller
CNS 13792-1996 Measuring Methods of Optical Polarizer for Communication
CNS 11521-1986 Method for Making Anode Polarization Measurement for Stainless Steels
CNS 14112-1998 Methods of measurement for optical variable polarization beam splitter

International Telecommunication Union (ITU), polarization

ITU-R S.727-2-2007 Cross-polarization isolation from very small aperture terminals (VSATs)
ITU-R S.1844-2009 Cross-polarization reference gain pattern for linearly polarized very small aperture terminals (VSAT) for frequencies in the range 2 to 31 GHz
ITU-R S.1844 FRENCH-2009 Cross-polarization reference gain pattern for linearly polarized very small aperture terminals (VSAT) for frequencies in the range 2 to 31 GHz
ITU-R BO.791 FRENCH-1992 Choice of Polarization for the Broadcasting-Satellite Service
ITU-R BO.791 SPANISH-1992 Choice of Polarization for the Broadcasting-Satellite Service
ITU-R BO.791-1992 Choice of Polarization for the Broadcasting-Satellite Service
ITU-R QUESTION 116-2003 Polarization of emissions in the terrestrial broadcasting service
ITU-R REPORT BS.464-5-1990 Polarization of emissions in frequency-modulation broadcasting in band 8 (VHF)
ITU-R RAPPORT BS.464-5 FRENCH-1990 Polarization of emissions in frequency-modulation broadcasting in band 8 (VHF)
ITU-R BT.419-3 FRENCH-1992 DIRECTIVITY AND POLARIZATION DISCRIMINATION OF ANTENNAS IN THE RECEPTION OF TELEVISION BROADCASTING
ITU-R BT.419-1990 Directivity and polarization discrimination of antennas in the reception of television broadcasting
ITU-R INFORME BO.814-2 SPANISH-1986 Factors to be considered in the choice of polarization for planning the broadcasting-satellite service
ITU-R REPORT BO.814-2-1986 Factors to be considered in the choice of polarization for planning the broadcasting-satellite service

Defense Logistics Agency, polarization

DLA A-A-55463 A VALID NOTICE 2-2006 CONNECTORS, ELECTRICAL, POWER, RECEPTACLE HOUSINGS, POLARIZED
DLA A-A-55463 A VALID NOTICE 1-2001 CONNECTORS, ELECTRICAL, POWER, RECEPTACLE HOUSINGS, POLARIZED
DLA A-A-55463 A-1994 CONNECTORS, ELECTRICAL, POWER, RECEPTACLE HOUSINGS, POLARIZED
DLA A-A-55464 A VALID NOTICE 2-2006 CONNECTORS, ELECTRICAL, POWER, PLUG HOUSINGS, POLARIZED
DLA A-A-55464 A VALID NOTICE 1-2001 CONNECTORS, ELECTRICAL, POWER, PLUG HOUSINGS, POLARIZED
DLA A-A-55464 A-1994 CONNECTORS, ELECTRICAL, POWER, PLUG HOUSINGS, POLARIZED
DLA DSCC-DWG-87121 REV A-2002 POLARIZING PLUG, .025 POSTS, FITS LATCH HOUSINGS
DLA DSCC-DWG-01001-2001 CAPACITORS, FIXED, ELECTROLYTIC, POLARIZED, ALUMINUM OXIDE
DLA DESC-DWG-89021 REV E-2013 CAPACITORS, FIXED, ELECTROLYTIC POLARIZED, ALUMINUM OXIDE, ULTRA-LOW ESR
DLA DESC-DWG-88022 REV D-2009 CAPACITORS, FIXED, ELECTROLYTIC, POLARIZED, ALUMINUM OXIDE, SINGLE END MOUNTING
DLA DESC-DWG-88022 REV E-2010 CAPACITORS, FIXED, ELECTROLYTIC, POLARIZED, ALUMINUM OXIDE, SINGLE END MOUNTING
DLA MIL-C-10544 C-1962 CONNECTORS, PLUG& RECEPTACLE (ELECTRICAL, AUDIO, WATERPROOF, TEN CONTACT, POLARIZED)
DLA MIL-DTL-83513 F-2007 CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA SMD-5962-87791 REV B-1989 MICROCIRCUITS, DIGITAL, BIPOLAR, FIRST-IN FIRST-OUT (FIFO), MONOLITHIC SILICON
DLA DSCC-DWG-07001-2007 CONNECTOR, RECEPTACLE, ELECTRICAL (POWER, TWO-WIRE, POLARIZED, TWIST-LOCKING)
DLA MIL-C-10544 C NOTICE 2-1999 CONNECTORS, PLUG& RECEPTACLE (ELECTRICAL, AUDIO, WATERPROOF, TEN CONTACT, POLARIZED)
DLA MIL-C-10544 C (3)-1998 CONNECTORS, PLUG& RECEPTACLE (ELECTRICAL, AUDIO, WATERPROOF, TEN CONTACT, POLARIZED)
DLA SMD-5962-87755 REV B-2005 MICROCIRCUIT, DIGITAL, BIPOLAR, BUFFERED REGISTERS, MONOLITHIC SILICON
DLA SMD-5962-88515-1988 MICROCIRCUITS, DIGITAL, BIPOLAR, PROGRAMMABLE LOGIC, MONOLITHIC SILICON
DLA SMD-5962-88604 REV B-2007 MICROCIRCUIT, DIGITAL, BIPOLAR, BIDIRECTIONAL TRANSCEIVERS, MONOLITHIC SILICON
DLA DSCC-DWG-89021 REV D-2004 CAPACITORS, FIXED, ELECTROLYTIC POLARIZED, ALUMINUM OXIDE, ULTRA-LOW ESR
DLA MIL-DTL-32139 A-2006 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA SMD-5962-87769 REV A-2001 MICROCIRCUIT, DIGITAL, BIPOLAR, DUAL LINE DRIVERS, MONOLITHIC SILICON
DLA SMD-5962-87772-1988 MICROCIRCUITS, DIGITAL, BIPOLAR, REGISTERED TRANSCEIVER, MONOLITHIC SILICON
DLA DSCC-DWG-88022 REV C-2000 CAPACITORS, FIXED, ELECROLYTIC, POLARIZED, ALUMINUM OXIDE, SINGLE END MOUNTING
DLA DSCC-DWG-89085 REV C-2006 CAPACITORS, FIXED, ELECTROLYTIC POLARIZED, ALUMINUM OXIDE, SNAP MOUNT, LOW PROFILE
DLA DESC-DWG-89085 REV D-2009 CAPACITORS, FIXED, ELECTROLYTIC POLARIZED, ALUMINUM OXIDE, SNAP MOUNT, LOW PROFILE
DLA DSCC-DWG-87109 REV C-2002 CONNECTORS, RECEPTACLE, ELECTRICAL, LATCH HOUSINGS, POLARIZED, DOUBLE ROW, .025 POSTS
DLA QPL-32139-2-2006 CONNECTORS, ELECTRICAL, RECTANGULAR, NONOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA QPL-83513-54-2006 CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA SMD-5962-88507 REV A-2001 MICROCIRCUIT, DIGITAL, BIPOLAR, FIELD PROGRAMMABLE SEQUENCER (FPLS), MONOLITHIC SILICON
DLA MIL-DTL-32139 A (1)-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA DSCC-DWG-10004 REV A-2011 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG)
DLA DSCC-DWG-10004 REV B-2012 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG )
DLA DSCC-DWG-13017-2013 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG)
DLA DSCC-DWG-10004 REV D-2013 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG )
DLA DSCC-DWG-13017 REV B-2013 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG)
DLA QPL-83513-54 NOTICE 1-2008 Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
DLA QPL-83513-QPD-2009 Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
DLA QPL-83513-QPD-2011 Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
DLA QPL-83513-2011 Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
DLA QPL-83513-2012 Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
DLA QPL-83513-2013 Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
DLA DSCC-DWG-10004 REV B-2009 CAPACITORS FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED SLUG)
DLA DSCC-DWG-89012 REV C-2006 CAPACITORS, FIXED, ELECTROLYTIC POLARIZED, ALUMINUM OXIDE, LOW SCREW-INSERT
DLA DESC-DWG-91026-1993 CONNECTORS, ELECTRICAL, RECTANGULAR, POLARIZED SHELL, HIGH DENSITY, NANOMINIATURE, GENERAL REQUIREMENTS FOR
DLA SMD-5962-88696 REV A-1990 MICROCIRCUITS, DIGITAL BIPOLAR DYNAMIC MEMORY CONTROLLER MONOLITHIC SILICON
DLA QPL-32139-2012 Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for
DLA MIL-C-39018/10 B-2009 CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE)(POLARIZED), ESTABLISHED RELIABILITY, STYLE CUR92 (INSULATED)
DLA SMD-5962-88550 REV C-2001 MICROCIRCUIT, DIGITAL, BIPOLAR, EDGE-TRIGGERED, D-TYPE FLIP-FLOP, MONOLITHIC SILICON
DLA MIL-C-62 F SUPP 1-2008 CAPACITORS, FIXED, ELECTROLYTIC (DC, ALUMINIM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR
DLA MIL-C-62 F-2008 CAPACITORS, FIXED, ELECTROLYTIC (DC. ALUMINUM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR
DLA QPL-62-2011 Capacitors, Fixed, Electrolytic (DC, Aluminum, Dry Electrolyte, Polarized), General Specification for
DLA QPL-62-2013 Capacitors, Fixed, Electrolytic (DC, Aluminum, Dry Electrolyte, Polarized), General Specification for
DLA DSCC-DWG-93026 REV P-2008 CAPACITORS FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG)
DLA DSCC-DWG-93026 REV R-2010 CAPACITORS FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG)
DLA SMD-5962-88504 REV D-2006 MICROCIRCUIT, DIGITAL, BIPOLAR, FIELD PROGRAMMABLE, LOGIC ARRAY (FPLA), MONOLITHIC SILICON
DLA MIL-DTL-32139 A (2)-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-83513/3 J (1)-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS M, CRIMP TYPE
DLA MIL-DTL-32139 A (3)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, NANOMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR
DLA MIL-DTL-83513/3 J (2)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, PIN CONTACTS, CLASS M, CRIMP TYPE
DLA MIL-C-62/1 D-2008 CAPACITORS, FIXED, ELECTROLYTIC (DC, ALUMINUM, DRY ELECTROLYTE, POLARIZED) STYLES CE10 AND CE11
DLA MIL-C-62/2 D-2008 CAPACITORS, FIXED, ELECTROLYTIC (DC, ALUMINUM, DRY ELECTROLYTE, POLARIZED) STYLES CE12 AND CE13
DLA MIL-C-62/12 G-2008 CAPACITORS, FIXED, ELECTROLYTIC (DC, ALUMINUM, DRY ELECTROLYTE, POLARIZED) STYLES CE70 AND CE71
DLA QPL-62-QPD-2010 Capacitors, Fixed, Electrolytic (DC, ALuminum, Dry Electrolyte, Polarized) General Specification for
DLA MIL-PRF-39018/2 F-2009 CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE)(NONPOLARIZED), STYLES CU14 (UNINSULATED) AND CU15 (INSULATED)
DLA MIL-PRF-39018/6 D-2009 CAPACITORS, FIXED, ELECTROLYTIC (ALUMINUM OXIDE) (POLARIZED), ESTABLISHED RELIABILITY STYLE CUR91 (INSULATED)
DLA SMD-5962-88598 REV A-1990 MICROCIRCUITS, DIGITAL, BIPOLAR CLOCK GENERATOR/MICROCYCLE LENGTH CONTROLLER, MONOLITHIC SILICON
DLA MIL-C-62 E SUPP 1-2004 CAPACITORS, FIXED, ELECTROLYTIC (DC, ALUMINIM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR
DLA MIL-C-62 E-2004 CAPACITORS, FIXED, ELECTROLYTIC (DC, ALUMINIM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR
DLA MIL-DTL-21617 A SUPP 1-2003 CONNECTORS, PLUG AND RECEPTACLE, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, GENERAL SPECIFICATION FOR
DLA MIL-DTL-21617 A-2003 CONNECTORS, PLUG AND RECEPTACLE, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, GENERAL SPECIFICATION FOR
DLA SMD-5962-01507-2001 MICROCIRCUIT, DIGITAL, BIPOLAR, HIGH-SPEED LOOK-AHEAD CARRY GENERATOR, MONOLITHIC SILICON
DLA SMD-5962-88555 REV C-2001 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY, TTL, D-TYPE REGISTER, MONOLITHIC SILICON
DLA SMD-5962-88698 REV D-2006 MICROCIRCUIT, DIGITAL, BIPOLAR, ADVANCED LOW POWER SCHOTTKY TTL, SYNCHRONOUS 4-BIT UP/DOWN COUNTER, MONOLITHIC SILICON
DLA MIL-DTL-21617/17 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts (Style 026A)
DLA MIL-DTL-21617/19 VALID NOTICE 1-2008 Connector, Female Plug Electrical, Rectanglar, Polarized Shell, Miniature Type, Socket Contacts (Style 032A)
DLA MIL-DTL-21617/20 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts (Style 032A)
DLA MIL-DTL-21617/22 VALID NOTICE 1-2008 Connector, Female Plug Electrical, Rectanglar, Polarized Shell, Miniature Type, Socket Contacts (Style 040A)
DLA MIL-DTL-21617/23 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts (Style 040A)
DLA MIL-DTL-21617/10 VALID NOTICE 1-2008 CONNECTOR, FEMALE PLUG ELECTRICAL, RECTANGLAR, POLARIZED SHELL, MINIATURE TYPE, SOCKET CONTACTS (STYLE 017A)
DLA MIL-DTL-21617/11 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts (Style 017A)
DLA MIL-DTL-21617/13 VALID NOTICE 1-2008 Connector, Female Plug Electrical, Rectanglar, Polarized Shell, Miniature Type, Socket Contacts (Style 023A)
DLA MIL-DTL-21617/14 VALID NOTICE 1-2008 Connector, Male Receptacle Electrical, Rectanglar, Polarized Shell, Miniature Type, Pin Contacts (Style 023A)
DLA MIL-DTL-21617/16 VALID NOTICE 1-2008 Connector, Female Plug Electrical, Rectanglar, Polarized Shell, Miniature Type, Socket Contacts (Style 026A)

Professional Standard - Electron, polarization

SJ 2534.9-1985 Test procedures for antennas--Polarization measurement
SJ 20930-2005 General specification for direct reading rotary vane attenuators
SJ/Z 1171-1977 Methods for determination of polarization curve of electroplating solution

AENOR, polarization

UNE 34195:1984 SUGARS. DETERMINATION OF THE ROTATORY POWER (POLARISATION).
UNE-EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011)
UNE-EN ISO 3211:2011 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2010)
UNE-EN ISO 7599:2011 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium (ISO 7599:2010)
UNE 112072:2011 Laboratory measurement of corrosion speed using the polarization resistance technique.
UNE-EN ISO 2128:2011 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)

Japanese Industrial Standards Committee (JISC), polarization

JIS G 0579:1983 Method for making anodic polarization measurement for stainless steels
JIS G 0579:2007 Method of anodic polarization curves measurement for stainless steels
JIS G 0579 AMD 1:2012 Method of anodic polarization curves measurement for stainless steels (Amendment 1)
JIS H 8684:2013 Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to cracking by deformation
JIS H 0530:1993 Measurement methods of polarization resistance of copper alloy tubes for condenser
JIS H 8689:2013 Anodizing of aluminium and its alloys -- Check for continuity of thin anodic oxidation coatings -- Copper sulfate test
JIS H 8686-1:2013 Anodizing of aluminium and its alloys.Visual determination of image clarity of anodic oxidation coatings.Visual method
JIS W 1108:2000 Aerospace -- Anodic treatment of titanium and titanium alloys -- Sulfuric acid process
JIS H 8685-2:2013 Anodizing of aluminium and its alloys -- Determination of the comparative fastness to ultraviolet light of coloured anodic oxidation coatings
JIS H 8688:2013 Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxidation coatings
JIS H 8686-2:2013 Anodizing of aluminium and its alloys.Instrumental determination of image clarity of anodic oxidation coatings.Instrumental method
JIS H 8683-3:2013 Anodizing of aluminium and its alloys.Assessment of quality of sealed anodic oxidation coatings .Part 3: Measurement of admittance
JIS H 8682-2:2013 Anodizing of aluminium and its alloys.Measurement of abrasion resistance of anodic oxidation coatings.Part 2: Abrasive jet abrasion resistance test
JIS H 8682-3:2013 Anodizing of aluminium and its alloys.Measurement of abrasion resistance of anodic oxidation coatings .Part 3: Falling sand abrasion resistance test

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, polarization

REPORT M.2175-2010 Simultaneous dual linear polarization transmission technique using digital cross-polarization cancellation for MSS systems
REPORT BS.464-5-1990 Polarization of emissions in frequency-modulation broadcasting in band 8 (VHF)
ITU-R S.727-1-2002 Cross-polarization isolation from very small aperture terminals (VSATs)
QUESTION 11/6-2003 Polarization of emissions in the terrestrial broadcasting service (Document 6/1-E)
REPORT BO.814-2-1986 Factors to be considered in the choice of polarization for planning the broadcasting-satellite service

Professional Standard - Geology, polarization

DZ/T 0281-2015 Technical regulations for phase induced polarization method
DZ/T 0204-1999 Technical Regulations for Borehole Induced Polarization Method
DZ/T 0070-1993 Technical regulations for time-domain induced polarization method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, polarization

GB/T 8013-1987 Anodizing of aluminium and aluminium alloys--General specifications for anodic oxidation coatings
GB/T 41760-2022 Test method for spontaneous polarization of tourmaline
GB/T 14952.1-1994 Anodizing of aluminium and its alloys.Assessment of quality of sealed anodic oxide coatings
GB/T 4951-1985 Sacrificial anode of Zn-Al-Cd alloy--Chemical analysis
GB/T 4951-2007 Chemical analysis methods for sacrificial anodes of Zn-Al-Cd alloy
GB/T 14952.2-1994 Anodizing of aluminium and its alloys.Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution
GB/T 4949-1985 Sacrificial anode of Al-Zn-In system alloy--Chemical analysis
GB/T 4949-2007 Chemical analysis methods for sacrificial anodes of AL-Zn=In system alloy
GB/T 20504-2006 Anodizing of aluminium and its alloys. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
GB/T 8754-2006 Anodizing of aluminium and its alloys. Insulation check.by measurement of breakdown potential
GB/T 12967.4-1991 Anodizing of aluminium and aluminium alloys--Determination of the fastness to ultraviolet light of coloured anodic oxidation coatings
GB/T 11110-1989 Anodizing of aluminium and its alloys--Determination of quality of sealed anodic oxide coating--Admittance test
GB/T 12967.3-1991 Anodizing of aluminium and aluminium alloys--Copper accelerated acetic acid salt spray test for anodic oxidation coatings (CASS test)
GB/T 20505-2006 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
GB/T 23612-2009 Anodizing and electrophoretic painting technical specification on wrought aluminium alloy extruded profiles for architecture
GB/T 8752-2006 Anodizing of aluminium and its alloys. Check of continuity of thin anodic oxide coating. Copper sulphate test
GB/T 8752-1988 Anodizing of aluminium and aluminium alloys--Check of continuity of thin anodic oxide coatings--Copper sulphate test
GB/T 12967.5-1991 Anodizing of aluminium and aluminium alloys--Assessment of resistance of anodic oxidation coatings to cracking by deformation
GB 6808-1986 Artificial light accelerated test of light fastness of anodized colored anodized film on aluminum and aluminum alloy
GB/T 6808-1986 Anodizing of aluminium and its alloys--Accelerated test of light fastness of coloured anodic oxide coatings using artificial light
GB/T 8014-1987 Anodizing of aluminium and aluminium alloys--Definitions thickness of anodic oxidation coatings and conventions concerning the measurement of thickness
GB/T 8013.1-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys Part 1: Anodic oxide coatings
GB/T 20506-2006 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer
GB/T 14952.3-1994 Anodizing of aluminium and its alloys.Testing method for anodic oxide coating

VE-FONDONORMA, polarization

NORVEN 13-30-1965

Professional Standard - Aviation, polarization

HBJ 2-1996 Design regulations for electrolysis and anodization workshops
HB/Z 197-1991 Technical specifications for phosphoric acid anodizing of structurally bonded aluminum alloys

Association Francaise de Normalisation, polarization

NF L10-311*NF EN 2536:1995 Aerospace series. Hard anodizing of aluminium alloys.
NF A91-400:1987 Anodizing of aluminium and its alloys. Vocabulary.
NF EN ISO 8251:2018 Anodisation de l'aluminium et de ses alliages - Détermination de la résistance à l'abrasion des couches d'oxyde anodiques
NF L10-312*NF EN 2808:1997 Aerospace series. Anodizing of titanium and titanium alloys.
NF A91-491:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings.
NF A91-491*NF EN ISO 8251:2018 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
NF A91-450:1981 Anodizing of aluminium and its alloys. General specifications for anodic oxide coatings on aluminium.
NF A91-486*NF EN ISO 3211:2018 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation
NF EN IEC 61757-4-3:2020 Capteurs fibroniques - Partie 4-3 : mesure du courant électrique - Méthode polarimétrique
NF A91-494:2010 Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method.
NF EN ISO 2106:2020 Anodisation de l'aluminium et de ses alliages - Détermination de la masse surfacique (masse par unité de superficie) des couches d'oxydation anodique - Méthode gravimétrique
NF A50-115*NF EN 14392:2008 Aluminium and aluminium alloys - Requirements for anodised products for use in contact with foodstuff
NF L10-310*NF EN 2101:1992 Aerospace series. Chromic acid anodizing of aluminium and wrought aluminium alloys.
NF L10-315*NF EN 2284:1992 Aerospace series. Sulphuric acid anodizing of aluminium and wrought aluminium alloys.
NF A91-402:1981 Surface treatments of metals. Anodic oxidation of aluminium and its alloys. Thickness measurements.
NF A91-479:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test.
NF A91-479*NF EN ISO 2085:2018 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
NF A91-480:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method.
NF A91-481*NF EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
NF A91-494*NF EN ISO 10215:2018 Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method
NF A91-480*NF EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
NF A91-450:2011 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium.

International Organization for Standardization (ISO), polarization

ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
ISO 8251:2018 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
ISO 7599:2010 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium
ISO 7599:1983 Anodizing of aluminium and its alloys; General specifications for anodic oxide coatings on aluminium
ISO 3211:1977 Anodizing of aluminium and its alloys; Assessment of resistance of anodic oxide coatings to cracking by deformation
ISO 3211:2010 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation
ISO 6581:1980 Anodizing of aluminium and its alloys; Determination of the fastness to ultra-violet light of coloured anodic oxide coatings
ISO 6581:2018 Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
ISO 2085:2018 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
ISO 3211:2018 Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation
ISO 2085:1976 Anodizing of aluminium and its alloys; Check of continuity of thin anodic oxide coatings; Copper sulphate test
ISO 2135:1976 Anodizing of aluminium and its alloys — Accelerated test of lightfastness of coloured anodic oxide coatings
ISO/TR 8125:1984 Anodizing of aluminium and its alloys; Determination of colour and colour difference of coloured anodic coatings
ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
ISO 10216:2010 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
ISO 10216:1992 Anodized aluminium and aluminium alloys; instrumental determination of image clarity of anodic oxidation coatings; instrumental method
ISO 10216:2017 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
ISO 3210:1983 Anodizing of aluminium and its alloys; Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution
ISO 10074:2021 Anodizing of aluminium and its alloys — Specification for hard anodic oxidation coatings on aluminium and its alloys
ISO 2085:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
ISO 2106:1982 Anodizing of aluminium and its alloys; Determination of mass per unit area (surface density) of anodic oxide coatings; Gravimetric method
ISO 2128:1976 Anodizing of aluminium and its alloys; Determination of thickness of anodic oxide coatings; Non-destructive measurement by split-beam microscope
ISO 8080:1985 Aerospace; Anodic treatment of titanium and titanium alloys; Sulfuric acid process
ISO 10215:2010 Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method
ISO 10215:2018 Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method
ISO 10074:2010 Anodizing of aluminium and its alloys - Specification for hard anodic oxidation coatings on aluminium and its alloys
ISO 10074:2017 Anodizing of aluminium and its alloys - Specification for hard anodic oxidation coatings on aluminium and its alloys

British Standards Institution (BSI), polarization

BS EN ISO 8251:2011 Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
BS EN ISO 7599:2010 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium
BS EN 2101:1991 Specification for chromic acid anodizing of aluminium and wrought aluminium alloys
BS EN 2284:1991 Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys
BS PD IEC TS 62607-8-2:2021 Nanomanufacturing. Key control characteristics. Nano-enabled metal-oxide interfacial devices. Test method for the polarization properties by thermally stimulated depolarization current
BS EN ISO 3211:2010 Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
BS EN 12373-16:2001 Aluminium and aluminium alloys. Anodizing. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
BS EN ISO 8251:2018 Tracked Changes. Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
BS EN 12373-15:2001 Aluminium and aluminium alloys. Anodizing. Assessment of resistance of anodic oxidation coatings to cracking by deformation
BS ISO 2135:2010 Anodizing of aluminium and its alloys - Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
BS EN 12373-14:2001 Aluminium and aluminium alloys. Anodizing. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
BS ISO 10216:2010 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
BS ISO 10216:2017 Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method
BS EN 12373-17:2001 Aluminium and aluminium alloys. Anodizing. Determination of electric breakdown potential
BS EN 12373-17:2001(2002) Aluminium and aluminium alloys. Anodizing. Determination of electric breakdown potential
BS EN ISO 2085:2010 Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
BS EN ISO 10215:2010 Anodizing of aluminium and its alloys. Visual determination of image clarity of anodic oxidation coatings. Chart scale method
BS EN ISO 3211:2018 Tracked Changes. Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
BS EN 2536:1995 Hard anodizing of aluminium alloys
BS EN 2912:1996 Washers, flat, large diameter, in aluminium alloy, anodized or chromated
20/30407280 DC BS ISO 10074. Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys
BS EN ISO 2106:2011 Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
BS EN 12373-2:1999 Aluminium and aluminium alloys - Anodizing - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
BS EN ISO 2106:2020 Tracked Changes. Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
BS EN 12373-1:2001 Aluminium and aluminium alloys - Anodizing - Method for specifying decorative and protective anodic oxidation coatings on aluminium
BS ISO 10074:2017 Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys
BS ISO 10074:2010 Anodizing of aluminium and its alloys - Specification for hard anodic oxidation coatings on aluminium and its alloys
BS ISO 10074:2021 Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys
BS 519:1950 Specification for tractive armature direct current neutral-polar line relays for railway signalling

Danish Standards Foundation, polarization

DS/EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings
DS/EN ISO 3211:2011 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation
DS/EN ISO 7599:2010 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium
DS/ISO 3211:1988 Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxide coatings to cracking by deformation
DS/ISO 7599:1988 Anodizing of aluminium and its alloys. General specifications for anodic oxide coatings on aluminium
DS/EN 2101:1991 Aerospace series. Chromic acid anodizing of aluminium and wrought aluminium alloys
DS/EN 2122:1994 Aerospace series - Washers,flat,in aluminium alloy, anodized or chromated
DS/ISO 6581:1988 Anodizing of aluminium and its alloys. Determination of the fastness to ultra-violet light of coloured anodic oxide coatings
Standardpakke Aluminium 1-2009 Standards package - Aluminium - Anodizing
DS/ISO 2085:1988 Anodizing of aluminium and its alloys. Check of continuity of thin anodic oxide coatings. Copper sulphate test
DS/EN ISO 2128:2010 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope
DS/ISO 10216:2011 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
DS/EN ISO 2085:2010 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test
DS/EN ISO 10215:2011 Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method
DS/EN ISO 2106:2011 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
DS/ISO 2106:1988 Anodizing of aluminium and its alloys. Determination of mass pr. unit area (surface density) of anodic oxide coatings. Gravimetric method

German Institute for Standardization, polarization

DIN EN ISO 8251:2018-12 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018); German version EN ISO 8251:2018
DIN EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011); German version EN ISO 8251:2011
DIN EN ISO 8251:2018 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
DIN EN ISO 3211:2019 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
DIN EN ISO 3211:2019-03 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018); German version EN ISO 3211:2018
DIN EN ISO 2085:2018-12 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018); German version EN ISO 2085:2018
DIN 65168:1988 Aerospace; plug-in relays; DC 28 V, one- and three pole, 10 Amp, polarized, monostable
DIN 65167:1988 Aerospace; plug-in relays; DC 28 V, two- and four pole, 5 Amp, polarized, monostable
DIN EN ISO 10215:2018-06 Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018); German version EN ISO 10215:2018
DIN EN ISO 2106:2020-05 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019); German version EN ISO 2106:2020
DIN EN ISO 2128:2010-12 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010); German version EN ISO 2128:2010
DIN EN ISO 7599:2010 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium (ISO 7599:2010); German version EN ISO 7599:2010

ES-UNE, polarization

UNE-EN ISO 8251:2019 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
UNE-EN ISO 3211:2019 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
UNE-EN ISO 2085:2019 Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
UNE-EN ISO 10215:2018 Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)
UNE-EN ISO 2106:2020 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)

RU-GOST R, polarization

GOST 19661-1974 Anodo-mechanical bandsaw machines. Basic dimensions
GOST R 50006-1992 Lasers and solid-state laser heads. Method of measurement of polarization characteristics
GOST 17792-1972 Standarde reference silver-silver cloride saturate electrode of second class

CZ-CSN, polarization

CSN ON 35 3445-1963

Professional Standard - Machinery, polarization

JB/T 7704.6-1995 Test method for electroplating solution Determination of polarization curve

Institute of Electrical and Electronics Engineers (IEEE), polarization

IEEE Std C37.103-1990 Guide for differential and polarizing relay circuit testing
IEEE Std C37.103-2004 IEEE Guide for Differential and Polarizing Relay Circuit Testing
IEEE Std C37.103-2015 IEEE Guide for Differential and Polarizing Relay Circuit Testing
IEEE PC37.103/D5, July 2014 IEEE Draft Guide for Differential and Polarizing Relay Circuit Testing
IEEE PC37.103/D7.0, April 2015 IEEE Approved Draft Guide for Differential and Polarizing Relay Circuit Testing

Electronic Components, Assemblies and Materials Association, polarization

ECA 331-1966 Stereophonic Headphones with 3-Contact Plugs, Polarization of

ECIA - Electronic Components Industry Association, polarization

331-1966 Stereophonic Headphones with 3-Contact Plugs@ Polarization of

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., polarization

IEEE C37.103-1990 Guide for Differential and Polarizing Relay Circuit Testing
IEEE C37.103-2004 Guide for Differential and Polarizing Relay Circuit Testing
IEEE C37.103-2015 Guide for Differential and Polarizing Relay Circuit Testing

PT-IPQ, polarization

NP EN 12373-15-2001 Aluminium and aluminium alloys Anodizing Part 15:Assessment of resistance of anodic oxidation coatings to cracking by deformation
NP EN 12373-5-2001 Aluminium and aluminium alloys Anodizing Part 5:Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
NP EN 12373-2-2001 Aluminium and aluminium alloys Anodizing Part 2:Determination of mass per unit area(surface density) of anodic oxidation coatings.Gravimetric method
NP EN 12373-14-2001 Aluminium and aluminium alloys Anodizing Part 14:Visual determination of image clarity of anodic oxidation coatings-Chart scale method
NP EN 12373-10-2001 Aluminium and aluminium alloys Aodizing Part 10:Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
NP 2908-1987
NP EN 12373-9-2001 Aluminium and aluminium alloys Aodizing Part 9:Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus

IT-UNI, polarization

National Association of Corrosion Engineers (NACE), polarization

NACE 35108-2008 One Hundred Millivolt (mV) Cathodic Polarization Criterion (Item No. 24235)
NACE RP0197-1997 Standard Format for Computerized Electrochemical Polarization Curve Data Files
NACE RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files Item No. 21080

GM North America, polarization

GM GM4472M-1999 Anodic Coatings on Aluminum
GM GM6256M-1991 Black Anodized Aluminum Bar Coded Plates

International Federation of Trucks and Engines, polarization

NAVISTAR MPAPS G-21-2014 Anodic Coatings on Aluminum

U.S. Military Regulations and Norms, polarization

ARMY MIL-I-8474 C NOTICE 2-1998 INSPECTION OF ALUMINUM ALLOY PARTS, ANODIZING PROCESS FOR
ARMY MIL-I-8474 C VALID NOTICE 1-1989 INSPECTION OF ALUMINUM ALLOY PARTS, ANODIZING PROCESS FOR
ARMY MIL-I-8474 C-1983 INSPECTION OF ALUMINUM ALLOY PARTS, ANODIZING PROCESS FOR

Canadian Standards Association (CSA), polarization

CSA C22.2 No.160-M1985-1985 Indicateurs De Tension Et De Polarite Fiche No 1

KR-KS, polarization

KS D ISO 3211-2012 Anodizing of aluminium and its alloys－Assessment of resistance of anodic oxidation coatings to cracking by deformation
KS D ISO 10074-2012 Anodizing of aluminium and its alloys－Specification for hard anodic oxidation coatings on aluminium and its alloys
KS C IEC 61757-4-3-2021 Fibre optic sensors — Part 4-3: Electric current measurement —Polarimetric method
KS B ISO 12005-2020 Lasers and laser-related equipment — Test methods for laser beam parameters — Polarization

国家市场监督管理总局、中国国家标准化管理委员会, polarization

GB/T 4949-2018 Chemical analysis methods for sacrificial anodes of Al-Zn-In system alloy
GB/T 8013.1-2018 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 1: Anodic oxide coatings

CH-SNV, polarization

Professional Standard - Aerospace, polarization

QJ 472-1979 Aluminum and aluminum alloy insulating anodized coating technical conditions
QJ 469-1988 Specifications for sulfuric acid anodized coatings on aluminum and aluminum alloys
QJ 470-1988 Specifications for hard anodized coatings on aluminum and aluminum alloys
QJ 471-1988 Technical conditions for aluminum and aluminum alloy porcelain anodized coatings
QJ 472-1988 Aluminum and aluminum alloy insulating anodized coating technical conditions
QJ 473-1988 Technical conditions for chromic acid anodized coatings on aluminum and aluminum alloys
QJ 470-1979 Specifications for hard anodized coatings on aluminum and aluminum alloys
QJ 471-1979 Technical conditions for aluminum and aluminum alloy porcelain anodized coatings
QJ 473-1979 Technical conditions for chromic acid anodized coatings on aluminum and aluminum alloys

Lithuanian Standards Office , polarization

LST EN ISO 8251:2011 Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2011)
LST EN ISO 3211:2011 Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2010)
LST EN ISO 7599:2010 Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium (ISO 7599:2010)
LST EN ISO 2128:2011 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)

TH-TISI, polarization

TIS 218-1977 Standard for anodized aluminium

AASHTO - American Association of State Highway and Transportation Officials, polarization

T 373M/T 373-2017 Standard Method of Test for Comparative Qualitative Corrosion Characterization of Steel Bars Used for Concrete Reinforcement (Linear Polarization Resistance and Potentiodynamic Polarization Tests)

International Electrotechnical Commission (IEC), polarization

IEC TS 62607-8-2:2021 Nanomanufacturing - Key control characteristics - Part 8-2: Nano-enabled metal-oxide interfacial devices - Test method for the polarization properties by thermally stimulated depolarization current

(U.S.) Telecommunications Industries Association , polarization

TIA TSB-141-2005 Polarization Dependent Loss: Measurement and Application Issues in Telecommunications Contains Color
TIA-455-196-1999 FOTP-196 Guideline for Polarization-Mode Measurement in Single-Mode Fiber Optic Components and Devices
TIA-455-196-1999(2008) FOTP-196 Guideline for Polarization-Mode Measurement in Single-Mode Fiber Optic Components and Devices

European Association of Aerospace Industries, polarization

AECMA PREN 2808-1996 Aerospace Series Anodizing of Titanium and Titanium Alloys Edition 1
AECMA PREN 3725-1992 Aerospace Series Bolts, Pan Head, 6 Lobe Recess, Long Thread, in Titanium Alloy Tl-P63, MoS2 Coated Classification: 1 100 MPa (at Ambient Temperature)/350 Degrees C Issue P 1
AECMA PREN 3725-1997 Aerospace Series Bolts, Pan Head, Six Lobe Recess, Normal Shank, Long Thread, in Titanium Alloy TI-P63, MoS2 Coated Classification: 1 100 MPa (at Ambient Temperature) Edition P 1

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, polarization

GB/T 23612-2017 Technical specification for process of anodizing and electrodeposition painting on aluminium alloy extruded profiles for architecture

IN-BIS, polarization

Professional Standard - Electricity, polarization

DL/T 2605-2023

GB-REG, polarization

REG NASA-LLIS-0395-1995 Lessons Learned - In-Flight Spacecraft Antenna Gain and Polarization Changes

AT-ON, polarization

ONORM EN 2284-1991 Aerospace series - Sulphuric acid anodizing of aluminium and wrought aluminium alloys
ONORM EN 2101-1991 Aerospace series - Chromic acid anodizing of aluminium and wrought aluminium alloys

Society of Automotive Engineers (SAE), polarization

SAE AMS2471G-2008 Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Undyed Coating
SAE AMS2471H-2014 Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Undyed Coating
SAE J399A-1976 ANODIZED ALUMINUM AUTOMOTIVE PARTS
SAE J399-2023 Anodized Aluminum Automotive Parts

Aerospace, Security and Defence Industries Association of Europe (ASD), polarization

ASD-STAN PREN 2808-1996 Aerospace Series Anodizing of Titanium and Titanium Alloys (Edition 1)
ASD-STAN PREN 3002-1990 Aerospace Series Chromic Acid Anodizing Testing of Adhesives (Issue P 1)

Professional Standard - Chemical Industry, polarization

HG/T 4543-2013 Water treatment chemicals.Determination of corrosion inhibition performance.Potentiodynamic polarization method

YU-JUS, polarization

JUS C.T7.225-1984 Anodic oxidation of aluminium and aluminium alloys. Determination of mass par unit area of anodic oxide coatings. Gravimetric method
JUS C.T7.237-1984 Anodic oxidation of aluminium and aluminium alloys. Chack of continuity of thin anodic oxide coatings — Copper sulphate test

European Telecommunications Standards Institute (ETSI), polarization

ETSI ETS 300 639-1996 Transmission and Multiplexing (TM); Sub-STM1 Digital Radio Relay Systems (DRRS) Operating in the 13 GHz, 15 GHz and 18 GHz Frequency Bands with About 28 MHz Co-Polar and 14 MHz Cross-Polar Channel Spacing

US-AAMA, polarization

AAMA AFPA-1991 Anodic Finishes/Painted Aluminum
AAMA AFPA-1-2015 Anodic Finishes/Painted Aluminum

ISUZU - Isuzu Motors Ltd., polarization

ISC-B22-001A-2000 Anodic Oxidation Coating (Japanese Version)

SAE - SAE International, polarization

SAE J399-1976 Anodized Aluminum Automotive Parts
SAE AMS-A-8625A-2003 Anodic Coatings for Aluminum and Aluminum Alloys

GM Europe, polarization

GME 00254-2009 Anodic Oxidation Coatings on Aluminum (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14665.)

Professional Standard-Ships, polarization

CB/Z 92-1981 Aluminum alloy anodized treatment
CB*/Z 92-1981 Aluminum alloy anodized treatment

未注明发布机构, polarization

BS EN 2536:1995(1999) Hard anodizing of aluminium alloys
ISO 10125:2010 Anodizing of aluminium and its alloys — Visual determination of image clarity of anodic oxidation coatings — Chart scale method

Professional Standard - Ocean, polarization

HY/T 192-2015 Test method of potentiodynamic polarization resistance of metallic materials in seawater

RO-ASRO, polarization

STAS 7043/3-1986 Non-metallic coatings (inorganic) ANOD1ZING OF ALUMINIUAI AND ITS ALLOYS Chccking of continuity of coating
STAS 7675-1982 ALUMIN1UM POLARIZED ELECTROLYTIC CAPACITORS WITH NON SOLID ELKCTROLYTE General technical requirements

FI-SFS, polarization

SFS 3887-1977

Hunan Provincial Standard of the People's Republic of China, polarization

DB43/T 2552-2023 Technical specification for polarization resistance detection of lithium-ion battery boxes for power energy storage
DB43/T 2551-2023 Technical specification for polarized capacitance detection of lithium-ion battery boxes for power energy storage

SE-SIS, polarization

SIS SS-ISO 2128:1984 Anodizing of aluminium and its alloys - Determination of thickness of anodic oxide coatings - Non-destructive mea- surement by split-beam microscope
SIS SS 11 70 30-1980 Anodizing of aluminium and its alloys — Determination of thickness of anodic oxide coatings — Non-destructive measure ment by split-beam microscope

Indonesia Standards, polarization

SNI 07-1062-1989 Anodic coatings of aluminium plates and sheets

The Aluminum Association, polarization

AA 46-1978 Standards for Anodized Architectural Aluminum

ETSI - European Telecommunications Standards Institute, polarization

PRETS 300 639-1996 Transmission and Multiplexing (TM); Sub-STM1 Digital Radio Relay Systems (DRRS) Operating in the 13 GHz@ 15 GHz and 18 GHz Frequency Bands with About 28 MHz Co-Polar and 14 MHz Cross-Polar Channel Spacing
ETS 300 639-1996 Transmission and Multiplexing (TM); Sub-STM1 Digital Radio Relay Systems (DRRS) Operating in the 13 GHz@ 15 GHz and 18 GHz Frequency Bands with About 28 MHz Co-Polar and 14 MHz Cross-Polar Channel Spacing
ETS 300 639 PRA1-1999 Transmission and Multiplexing (TM); Digital Radio Delay Systems (DRRS); Sub-STM1 (DRRS) Operating in the 13 GHz@ 15 GHz and 18 GHz Frequency Bands with About 28 MHz Co-Polar and 14 MHz Cross-Polar Channel Spacing

PL-PKN, polarization

PN C04573 ArkusZ02-1974 Water and waste water Tests for organie solvents extrac- table matters Determination of impolar and polar of petroleum extractable organie matters by gravimetric method

United States Navy, polarization

NAVY MIL-STD-1674 VALID NOTICE 1-1991 INSERT ARRANGEMENTS FOR MIL-C-85028 CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW
NAVY MIL-STD-1674-1977 INSERT ARRANGEMENTS FOR MIL-C-85028 CONNECTOR, ELECTRIC, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW