ZH
RU
ES

Scanning Electron Microscopy Detection

Scanning Electron Microscopy Detection, Total:122 items.

In the international standard classification, Scanning Electron Microscopy Detection involves: Protection against crime, Paints and varnishes, Optical equipment, Analytical chemistry, Testing of metals, Linear and angular measurements, Physics. Chemistry, Air quality, Optics and optical measurements, Construction materials, Medical sciences and health care facilities in general, Textile fibres, Surface treatment and coating, Non-ferrous metals, Metrology and measurement in general, Semiconducting materials, Semiconductor devices, Integrated circuits. Microelectronics, Iron and steel products, Radiation protection, Paint ingredients.

Professional Standard - Judicatory, Scanning Electron Microscopy Detection

SF/T 0139-2023

Group Standards of the People's Republic of China, Scanning Electron Microscopy Detection

T/CSTM 00229-2020 Identification of graphene materials in coatings materials Scanning Electron Microscope-Energy Dispersive Spectrometer method
T/GAIA 017-2022 Determination of fluorine content in the surface coating of aluminum and aluminum alloys— Scanning electron microscope and energy dispersive spectrometer method
T/CSTM 00346-2021 Automatic classification and statistics for the Inclusions in Steel —Energy dispersive spectrum method of scanning electron microscope

Fujian Provincial Standard of the People's Republic of China, Scanning Electron Microscopy Detection

DB35/T 110-2000 Electron probe and scanning electron microscope X-ray energy spectrum analysis method for paint physical evidence detection

Professional Standard - Public Safety Standards, Scanning Electron Microscopy Detection

GA/T 1418-2017 Elemental Composition Examination of Forensic Science Glass Evidence Scanning Electron Microscopy/Energy Spectroscopy
GA/T 1939-2021 Forensic Science Current Spot Examination Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 1938-2021 Forensic Science Metal Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
GA/T 1937-2021 Forensic Science Rubber Inspection Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 1522-2018 Forensic Science Shooting Residue Inspection Scanning Electron Microscopy/X-Ray Spectroscopy
GA/T 1521-2018 Forensic Science Plastics Elemental Composition Examination Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 1519-2018 Forensic Science Toner Elemental Composition Inspection Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 909-2010 Collecting and packaging method for trace evidence-Gunshot residue(SEM/EDS examination)
GA/T 823.3-2018 Methods of Examination of Paint Evidence in Forensic Science Part 3: Scanning Electron Microscopy/X-ray Spectroscopy
GA/T 1520-2018 Forensic science black powder, pyrotechnic powder element composition inspection scanning electron microscope/X-ray energy spectrometry

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Scanning Electron Microscopy Detection

GB/T 17362-2008 Scanning electron microscope X-ray energy spectrum analysis method for gold products
GB/T 17362-1998 Nondestructive method of X-ray EDS analysis with SEM for gold jewelry
GB/T 25189-2010 Microbeam analysis.Determination method for quantitative analysis parameters of SEM-EDS
GB/T 17359-1998 General specification of X-ray EDS quantitative analysis for EPMA and SEM
GB/T 19267.6-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 6:Scanning electron microscope/X ray energy dispersive spectrometry
GB/T 16594-1996 Micron grade lenght measurement by SEM
GB/T 17722-1999 Gold-plated thickness measurement by SEM
GB/T 16594-2008 General rules for measurement of length in micron scale by SEM
GB/T 20307-2006 General rules for nanometer-scale length measurement by SEM
GB/T 17361-1998 Identification method of authigenic clay mineral in sedimentary rock by SEM & XEDS
GB/T 28873-2012 General guide of environmental scanning electron microscopy for biological effectes on topography induced by nanoparticles
GB/T 36422-2018 Man-made fiber.Test method for micro morphology and diameter.Scanning electron microscope method
GB/T 17361-2013 Microbeam analysis.Identification of authigenic clay mineral in sedimentary rock menthod by scanning electron microscope and energy dispersive spectrometer
GB/T 19267.6-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 6: Scanning electron microscopy
GB/T 32869-2016 Nanotechnologies.Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis

Professional Standard - Aviation, Scanning Electron Microscopy Detection

HB 20094.4-2012 Test method for determination of wear metals in operating liquid for aviation.Part 4: Scanning electron microscopy and energy dispersive spectrometry

International Organization for Standardization (ISO), Scanning Electron Microscopy Detection

ISO/TS 21383:2021 Microbeam analysis - Scanning electron microscopy - Qualification of the scanning electron microscope for quantitative measurements
ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
ISO 9220:2022 Metallic coatings — Measurement of coating thickness — Scanning electron microscope method
ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
ISO 14966:2019 Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
ISO 14966:2002/cor 1:2007 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method; Technical Corrigendum 1

Association of German Mechanical Engineers, Scanning Electron Microscopy Detection

VDI 3866 Blatt 5-2004 Determination of asbestos in technical products - Scanning electron microscopy method
VDI 3866 Blatt 5-2017 Determination of asbestos in technical products - Scanning electron microscopy method
VDI 3861 Blatt 2-2008 Stationary source emissions - Measurement of inorganic fibrous particles in exhaust gas - Scanning electron microscopy method
VDI 3492-2004 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method
VDI 3492-2013 Indoor air measurement - Ambient air measurement - Measurement of inorganic fibrous particles - Scanning electron microscopy method

American Society for Testing and Materials (ASTM), Scanning Electron Microscopy Detection

ASTM E2809-13 Standard Guide for Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations
ASTM E280-98(2004)e1 Standard Reference Radiographs for Heavy-Walled (4 &189; to 12-in. [114 to 305-mm]) Steel Castings
ASTM E280-21 Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
ASTM E2809-22 Standard Guide for Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectroscopy (SEM/EDS) in Forensic Polymer Examinations
ASTM C1723-16(2022) Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
ASTM C1723-10 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
ASTM C1723-16 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
ASTM E1588-95(2001) Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM E1588-08 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-10 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1588-95 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy-Dispersive Spectroscopy
ASTM E1588-07e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-ray Spectrometry
ASTM E1588-07 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM E1683-02(2022) Standard Practice for Testing the Performance of Scanning Raman Spectrometers
ASTM E1588-20 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
ASTM B748-90(2006) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(1997) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E3284-23 Standard Practice for Training in the Forensic Examination of Primer Gunshot Residue (pGSR) Using Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
ASTM B748-90(2010) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM F1621-96 Standard Practice for Determining the Positional Accuracy Capabilities of a Scanning Surface Inspection System
ASTM B748-90(2021) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E3309-21 Standard Guide for Reporting of Forensic Primer Gunshot Residue (pGSR) Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS)
ASTM B748-90(2001) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM B748-90(2016) Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope
ASTM E2142-01 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
ASTM E1588-10e1 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
ASTM F1372-93(1999) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM F1372-93(2020) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components
ASTM D605-82(1996)e1 Standard Specification for Magnesium Silicate Pigment (Talc)
ASTM D6059-96(2011) Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

国家市场监督管理总局、中国国家标准化管理委员会, Scanning Electron Microscopy Detection

GB/T 35099-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrometry—Morphology and element analysis of single fine particles in ambient air
GB/T 35097-2018 Microbeam analysis—Scanning electron microscopy with energy dispersive X-ray spectrosmetry—Determination of numberical concentration of inorganic fibrous particles in ambient air
GB/T 38783-2020 Method of coating thickness determination for precious metal composites by scanning electron microscope

Association Francaise de Normalisation, Scanning Electron Microscopy Detection

NF A91-108:1995 Metallic coatings. Measurement of coating thickness. Scanning electron microscope method.
NF A91-108*NF EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
NF EN ISO 9220:2022 Revêtements métalliques - Mesurage de l'épaisseur de revêtement - Méthode au microscope électronique à balayage
FD T16-203:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
NF X43-404-27*NF ISO 16000-27:2014 Indoor air - Part 27 : determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
NF ISO 16000-27:2014 Air intérieur - Partie 27 : détermination de la poussière fibreuse déposée sur les surfaces par MEB (microscopie électronique à balayage) (méthode directe)

RU-GOST R, Scanning Electron Microscopy Detection

GOST R 8.594-2009 State system for ensuring the uniformity of measurements. Scanning electron microscopes
GOST R 8.593-2009 State system for ensuring the uniformity of measurements. Atomic-force scanning probe microscopes. Method for verification
GOST ISO 16000-27-2017 Indoor air. Part 27. Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)

Danish Standards Foundation, Scanning Electron Microscopy Detection

DS/EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method
DS/ISO/TS 10798:2011 Nanotechnologies - Charaterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis

Korean Agency for Technology and Standards (KATS), Scanning Electron Microscopy Detection

KS D ISO 9220-2009(2022) Metallic coatings－Measurement of coating thickness－Scanning electron microscope method
KS D ISO 9220-2009(2017) Metallic coatings－Measurement of coating thickness－Scanning electron microscope method

German Institute for Standardization, Scanning Electron Microscopy Detection

DIN EN ISO 9220:2022-05 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022); German version EN ISO 9220:2022
DIN EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021); German and English version prEN ISO 9220:2021
DIN ISO 16000-27:2014 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) (ISO 16000-27:2014)
DIN SPEC 52407:2015-03 Nanotechnologies - Methods for preparation and assessment for particle measurements with atomic force microscopy (AFM) and transmission scanning electron microscopy (TSEM)
DIN ISO 16000-27:2014-11 Indoor air - Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method) (ISO 16000-27:2014)

British Standards Institution (BSI), Scanning Electron Microscopy Detection

BS ISO 14966:2002 Ambient air - Determination of numerical concentration of inorganic fibrous particles - Scanning electron microscopy method
21/30394409 DC BS ENISO 9220. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
BS EN ISO 9220:2022 Tracked Changes. Metallic coatings. Measurement of coating thickness. Scanning electron microscope method
DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
BS ISO 14966:2019 Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method
BS CECC 00013:1985 Harmonized system of quality assessment for electronic components: basic specification: scanning electron microscope inspection of semiconductor dice
BS DD ISO/TS 10798:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
18/30375050 DC BS ISO 14966. Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method

ES-UNE, Scanning Electron Microscopy Detection

UNE-EN ISO 9220:2022 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:2022)

NEMA - National Electrical Manufacturers Association, Scanning Electron Microscopy Detection

NEMA NU 2-2012 Performance Measurements of Positron Emission Tomographs
NEMA NU 2-2018 Performance Measurements of Positron Emission Tomographs (PET)

AENOR, Scanning Electron Microscopy Detection

UNE-EN ISO 9220:1996 METALLIC COATINGS. MEASUREMENT OF COATING THICKNESS. SCANNING ELECTRON MICROSCOPE METHOD. (ISO 9220:1988).

Lithuanian Standards Office , Scanning Electron Microscopy Detection

LST EN ISO 9220:2001 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988)

Japanese Industrial Standards Committee (JISC), Scanning Electron Microscopy Detection

JIS K 3850-1:2006 Determination of airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method
JIS K 3850-1:2000 Measuring method for airborne fibrous particles -- Part 1: Optical microscopy method and scanning electron microscopy method

International Telecommunication Union (ITU), Scanning Electron Microscopy Detection

ITU-R SM.1839 SPANISH-2007 Test procedure for measuring the scanning speed of radio monitoring receivers Procedimiento de prueba para medir la velocidad de exploraci髇 de los receptores de comprobaci髇 t閏nica radioel閏trica

GOSTR, Scanning Electron Microscopy Detection

PNST 508-2020 Nanotechnologies. Single-wall carbon nanotubes. Characterization by scanning electron microscopy and energy dispersive X-ray spectrometry

AT-ON, Scanning Electron Microscopy Detection

OENORM EN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)

European Committee for Standardization (CEN), Scanning Electron Microscopy Detection

prEN ISO 9220:2021 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO/DIS 9220:2021)

工业和信息化部, Scanning Electron Microscopy Detection

SJ/T 11759-2020 Measurement of Photovoltaic Cell Electrode Grid Line Aspect Ratio Laser Scanning Confocal Microscopy

BE-NBN, Scanning Electron Microscopy Detection

NBN EN ISO 9220:1995 Metallic coatings - Measurement of coating thickness - Scanning électron microscope method (ISO 9220:1988)

未注明发布机构, Scanning Electron Microscopy Detection

BS CECC 13:1985(1999) Harmonized system of quality assessment for electronic components : Basic specification : Scanning electron microscope inspection of semiconductor dice

Guangdong Provincial Standard of the People's Republic of China, Scanning Electron Microscopy Detection

DB44/T 1216-2013 Characterization of graphene using scanning electron microscopy and X-ray spectroscopy
DB44/T 1215-2013 Characterization of Single-Walled Carbon Nanotubes Using Scanning Electron Microscopy and Energy Spectroscopy

American National Standards Institute （ANSI), Scanning Electron Microscopy Detection

ANSI/ASTM D6059:2001 Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

Professional Standard - Commodity Inspection, Scanning Electron Microscopy Detection

SN/T 2649.1-2010 Determination of asbestos in cosmetics for import and export.Part 1:X-ray diffraction and scan electron microscopy method

International Electrotechnical Commission (IEC), Scanning Electron Microscopy Detection

IEC 62945:2018 Radiation protection instrumentation - Measuring the imaging performance of X-ray computed tomography (CT) security-screening systems

Professional Standard - Agriculture, Scanning Electron Microscopy Detection

水产品质量安全检验手册 6.5.5.0-2005 Chapter 6 Inspection of elements in aquatic products Section 5 Determination of lead in aquatic products (GBT 5009.12-2003) 5. Single-scan polarographic method