ZH
RU
ES

How to use the centrifuge

How to use the centrifuge, Total:33 items.

In the international standard classification, How to use the centrifuge involves: Equipment for processing of minerals, Ergonomics, Lubricants, industrial oils and related products, Products of the chemical industry, Paint ingredients, Soil quality. Pedology, Paints and varnishes, Internal combustion engines for road vehicles, Linear and angular measurements.

Professional Standard - Machinery, How to use the centrifuge

• JB/T 6119-1992 Service instruction of TCL settling and filtering centrifuge
• JB/T 53266-1997 Integral gear speed-up assembled centrifugal air compressor product quality classification (internal use)

German Institute for Standardization, How to use the centrifuge

• DIN CEN/TR 16710-1:2017-09*DIN SPEC 33427:2017-09 Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines; German version CEN/TR 16710-1:2015
• DIN 51365:1988 Testing of lubricants; determination of total dirt in used engine oils; separation by centrifuging
• DIN EN ISO 787-23:1995-10 General methods of test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979); German version EN ISO 787-23:1995

European Committee for Standardization (CEN), How to use the centrifuge

• CEN/TR 16710-1:2015 Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines
• PD CEN/TR 16710-1:2015 Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines
• EN ISO 787-23:1995 General methods of tests for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air)

International Organization for Standardization (ISO), How to use the centrifuge

• ISO/CD TR 16710-1 Ergonomics methods — Part 1: Feedback method : a method to understand how end users perform their work with machines
• ISO/TS 19392-6:2023 Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 6: Determination and evaluation of ice adhesion using centrifuge

YU-JUS, How to use the centrifuge

• JUS H.C8.223-1989 Pigments and extenders. Determination of density (using a centrifuge to remove entrained air)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), How to use the centrifuge

• ASHRAE OR-16-C016-2016 Comprehensive Assessment of Centrifugal Chillers Using Next Generation Refrigerant R1233zd(E)
• ASHRAE LO-09-060-2009 Energy Conservation Effects of Heat Source Systems for Business Use by Advanced Centrifugal Chillers

American Society for Testing and Materials (ASTM), How to use the centrifuge

• ASTM D1290-95(2015) Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
• ASTM D6836-02 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
• ASTM D6836-02(2008)e1 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
• ASTM D6836-16 Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge

British Standards Institution (BSI), How to use the centrifuge

• BS EN ISO 787-23:1995 General methods of test for pigments and extenders. Determination of density (using a centrifuge to remove entrained air)
• PD ISO/TS 19392-6:2023 Paints and varnishes. Coating systems for wind-turbine rotor blades. Determination and evaluation of ice adhesion using centrifuge
• BS EN 61010-2-020:2017 Tracked Changes. Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for laboratory centrifuges
• BS EN ISO 10360-5:2020 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) - Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or…
• 20/30387385 DC BS EN IEC 61010-2-020. Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-020. Particular requirements for laboratory centrifuges

US-CFR-file, How to use the centrifuge

• CFR 40-1039.505-2014 Protection of Environment. Part1039:Control of emissions from new and in-use nonroad compression-ignition engines. Section1039.505:How do I test engines usingsteady-state duty cycles, including ramped-modal testing?
• CFR 40-60.5415-2013 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.5415:How do I demonstrate continuous compliance with the standards for my gas well affected facility, my centrifugal compressor affected facility, my stationa
• CFR 40-60.5410-2013 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.5410:How do I demonstrate initial compliance with the standards for my gas well affected facility, my centrifugal compressor affected facility, my reciprocati

Danish Standards Foundation, How to use the centrifuge

• DS/EN ISO 787-23:1995 General methods of test for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air)

Association Francaise de Normalisation, How to use the centrifuge

• NF EN ISO 787-23:1995 Méthodes générales d'essai des pigments et matières de charge - Partie 23 : détermination de la masse volumique (en utilisant une centrifugeuse pour chasser l'air entraîné).
• NF E11-150-5*NF EN ISO 10360-5:2020 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS) - Part 5 : coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or s

American National Standards Institute （ANSI), How to use the centrifuge

• ANSI/SAE J620-1993 Flywheels for Industrial Engines Used With Industrial Power Take-Offs Equipped With Driving-Ring Type Overcenter Clutches and Engine Mounted Marine Gears

Lithuanian Standards Office , How to use the centrifuge

• LST EN ISO 787-23:2002 General method of tests for pigments and extenders - Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979)

AENOR, How to use the centrifuge

• UNE-EN ISO 787-23:1996 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 23: DETERMINATION OF DENSITY (USING A CENTRIFUGE TO REMOVE ENTRAINED AIR ). (ISO 787-23:1979).

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use the centrifuge

• GB/T 16857.8-2022 Geometrical product specifications (GPS)—Acceptance and reverification tests for coordinate measuring systems (CMS)—Part 8: CMMs with optical distance sensors

Society of Automotive Engineers (SAE), How to use the centrifuge

• SAE J620-2012 Flywheels for Industrial Engines Used with Industrial Power take-Offs Equipped with Driving-Ring Type Overcenter Clutches and engine-Mounted Marine Gears and Single Bearing Engine-Mounted power Generators

Others:   centrifuge use, centrifuge use, how to use ms, ms how to use, how to use a microscope, use centrifuge, how about centrifuge, How to Use Fluorescence, how to use nature, how to use hydrogen, how to use centrifuge, How to use the centrifuge, How Nucleic Acids Are Used, how to use ptfe, how to use ph, how to use bet, How leverage is used, how to use icpms, How to use infrared, How to use ftir.