ZH
RU
ES

the light

the light, Total:328 items.

In the international standard classification, the light involves: Lamps and related equipment, Paints and varnishes, Medical equipment, Lighting, Sports equipment and facilities, Fibre optic communications, Optics and optical measurements, Analytical chemistry, Testing of metals, Iron and steel products, Electrical and electronic testing, Vocabularies, Telecommunication systems, Optoelectronics. Laser equipment, Road engineering, Protection against fire, Products of non-ferrous metals, Safety of machinery, Electricity. Magnetism. Electrical and magnetic measurements, Electromechanical components for electronic and telecommunications equipment, Plastics, Photography, Road vehicle systems, Linear and angular measurements, Electrical engineering in general, Open systems interconnection (OSI), Machine tool systems, Insulating materials, Glass, Surface treatment and coating, Networking, Radiation protection, Electrical accessories, Farming and forestry, On-board equipment and instruments, Petroleum products in general, Ferroalloys, Products of the textile industry, Electrical wires and cables, Environmental testing, Rubber and plastics products, Domestic, commercial and industrial heating appliances, Power transmission and distribution networks, Adhesives, Items of art and handicrafts, Non-ferrous metals, Optical equipment, Products of the chemical industry, Components and accessories for telecommunications equipment, Machine tools, Pulps, Paper and board, Interface and interconnection equipment, Welding, brazing and soldering, Semiconductor devices, Equipment for entertainment, Edible oils and fats. Oilseeds, Television and radio broadcasting, Rubber, Shipbuilding and marine structures in general, Standardization. General rules, Radiocommunications.


Professional Standard - Machinery, the light

Association Francaise de Normalisation, the light

  • NF EN 62496-2-2:2011 Cartes à circuits optiques - Partie 2-2 : mesures - Dimensions des cartes à circuits optiques
  • NF EN 62496-3-1:2012 Cartes à circuits optiques - Norme de performance - Partie 3-1 : cartes à circuits optiques souples utilisant des fibres optiques en silice non connectorisées
  • NF T51-185:1979 Plastics. Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering, artificial light or at othersexposures.
  • NF C20-924-2-10:2001 Fire hazard testing - Part 2-10 : glowing/out-wire based test method - Glow-wire apparatus and common test procedure.
  • NF C20-924-2-11:2001 Fire hazard testing - Part 2-11 : glowing/hot-wire based test methods - Glow-wire flammability test method for end-products.
  • NF C20-924-2-12*NF EN 60695-2-12:2011 Fire hazard testing - Part 2-12 : glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials.
  • NF C93-881:1990 Optical fibre setting for local area network - Quality assurance and state of the art
  • NF X90-003-1:2011 Light and lighting - Lighting of work places - Part 1 : indoor work places.
  • NF T76-005*NF EN 1244:1998 Adhesive - Determination of the colour and/or colour changes of adhesive coats under the influence of light
  • NF X40-502:1963 Colours. Lighting and protection against light of coloured objects exhibited in museums and art galleries.
  • NF Q03-039-1:2009 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1 : indoor daylight conditions (ISO brightness).
  • NF EN 15434-1:2023 Mastics de collage - Partie 1 : mastics de scellement et/ou de collage en exposition direct à la lumière
  • NF X43-027:1993 Air quality. Ambient air. Determination of lead in aerosols X-ray fluorescence spectrometry.
  • NF C93-850-4-10:2007 Optical fibre cables - Part 4-10 : aerial optical cables along electrical power lines - Family specification for OPGW (Optical Ground Wires).
  • NF EN 60794-4-10:2014 Câbles à fibres optiques - Partie 4-10 : spécification de famille - Câbles de garde à fibres optiques (OPGW - Optical Ground Wires) le long des lignes électriques de puissance
  • NF T46-054:2007 Rubber - Identification - Infra-red spectrometric method.

Aeronautical Radio Inc., the light

Aerospace Industries Association/ANSI Aerospace Standards, the light

National Aeronautics and Space Administration (NASA), the light

RU-GOST R, the light

  • GOST 11279.2-1983 Organic dyes. Testing methods of colour fasteness to light, light and weather
  • GOST 10771-1982 Filament electric lamps for light measuring. Specifications
  • GOST 11612.7-1983 Photomultipliers. Measuring methods of light and spectral equivalent of anode current noise produced by luminous flux
  • GOST 17651-1972 Glass containers for medicines. Test methods for determination of light-protective properties
  • GOST R 55307-2012 Materials textile. Method of stand model tests stability to action of light and weather
  • GOST 25642-1983 Radiographic and fluorographic films. Marking and packing
  • GOST 3178-1975 Optical bench instruments. Height of arrangement of optical axis and exit pupil
  • GOST 25847-1983 Radiographic and fluorographic films. Sizes and controle methods
  • GOST R 52594-2006 Fibre-optic, radio-relay and satellite main channels of digital TV signals transmission systems. Basic parameters and methods of measuring

Defense Logistics Agency, the light

HU-MSZT, the light

Military Standards (MIL-STD), the light

British Standards Institution (BSI), the light

  • BS EN 12193:2007 Light and lighting - Sports lighting
  • BS EN 12193:2008 Light and lighting - Sports lighting
  • BS ISO 4993:2009 Steel and iron castings - Radiographic inspection
  • BS EN 62496-2-1:2011 Optical circuit boards. Measurements. Optical attenuation and isolation
  • PD IEC/TR 62658:2013 Roadmap of optical circuit boards and their related packaging technologies
  • BS EN 12464-2:2014 Light and lighting. Lighting of work places. Outdoor work places
  • BS EN 50377-14-1:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Cords with IEC 60793-2-50 singlemode category B1.1 and B1.3 fibre for category C
  • BS EN 50377-14-1:2021 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Simplex and duplex cords made from simplex plugs with cylindrical ferrules, using EN 60793-2-50 single-mode B-652 ou B-657 fibre for Cate
  • BS EN 13523-10:2001 Coil coated metals - Test methods - Resistance to fluorescent UV light and water condensation
  • BS EN IEC 62496-2-5:2022 Optical circuit boards. Basic test and measurement procedures - Flexibility test for flexible opto-electric circuits
  • BS EN 60794-4-10:2007 Optical fibre cables - Aerial optical cables along electrical power lines - Family specification for OPGW (optical ground wires)
  • BS EN 60794-4-10:2014 Optical fibre cables. Family specification. Optical ground wires (OPGW) along electrical power lines
  • BS EN 62496-3-1:2010 Optical circuit boards. Performance standard - Flexible optical circuit boards using unconnectorized optical glass fibres
  • 19/30371606 DC BS EN IEC 62496-2-61. Optical circuit boards. Part 2-61. Test methods. Flexibility for flexible optic-electric circuits
  • BS EN 62496-2:2017 Optical circuit boards. Basic test and measurement procedures - General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
  • BS ISO 16129:2012 Surface chemical analysis. X-ray photoelectron spectroscopy. Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer

European Committee for Standardization (CEN), the light

  • EN 12193:2007 Light and lighting - Sports lighting
  • EN 12193:1999 Light and Lighting - Sports Lighting
  • EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
  • EN 13523-10:2010 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation
  • EN 1435:1997/A1:2002 Non-Destructive Testing of Welds - Radiographic Testing of Welded Joints Ratified European Text
  • EN 1244:1998 Adhesives - Determination of the Colour and/or Colour Changes of Adhesives Coats under the Influence of Light
  • EN 15063-1:2014 Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 1: Guidelines to the routine method
  • EN 1435:1997 Non-destructive testing of welds Radiographic testing of welded joints Includes amendments A1:2002 and A2:2003
  • EN ISO 11997-2:2006 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light

International Code Council, the light

American National Standards Institute （ANSI), the light

BR-ABNT, the light

Korean Agency for Technology and Standards (KATS), the light

German Institute for Standardization, the light

  • DIN 51418-1:1996 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
  • DIN 6830-1:1975 Medical X-ray films used with intensifying screens; sensitometric simulation of the fluorescent radiation of calcium tungstate intensifying screens
  • DIN EN 1244:1998 Adhesives - Determination of the colour and/or colour changes of adhesives coats under the influence of light; German version EN 1244:1998
  • DIN 5037 Bb.1:1992 Photometric evaluation of projectors; simplified evaluation of projectors with rotationally symmetrical luminous intensity distribution for the use in film and television studios and stages
  • DIN EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
  • DIN 5037 Bb.2:1992 Photometric evaluation of projectors; simplified evaluation of projectors with non-rotationally symmetrical luminous intensity distribution for use in film and television studios and stages
  • DIN EN 13523-10:2017 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German version EN 13523-10:2017
  • DIN EN 13523-10:2010 Coil coated metals - Test methods - Part 10: Resistance to fluorescent UV radiation and water condensation; German version EN 13523-10:2010
  • DIN ISO 16129:2020-11 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer (ISO 16129:2018); Text in English
  • DIN 51418-1:2008-08 X-ray spectrometry - X-ray emission- and X-ray fluorescence analysis (XRF) - Part 1: Definitions and basic principles
  • DIN EN ISO 3656:2017-08 Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction (ISO 3656:2011 + Amd 1:2017); German version EN ISO 3656:2011 + A1:2017

CZ-CSN, the light

PT-IPQ, the light

  • E 155-1971
  • NP EN 410-2000 Glass in building Determination of luminous and solar characteristics of glazing
  • NP EN ISO 105-B01:2001 Textiles Tests for colour fastness Part B01:Colour fastness to light:Daylight(ISO 105-B01:1994,including Technical Corrigendum 1:1998)

ES-AENOR, the light

International Organization for Standardization (ISO), the light

  • ISO 4993:2009 Steel and iron castings - Radiographic inspection
  • ISO 4993:2015 Steel and iron castings - Radiographic testing
  • ISO/CD 24581 Road vehicles — General requirements and test methods of in-vehicle optical harnesses for up to 100Gbit/s communication
  • ISO/DIS 24581:2014 Road vehicles — General requirements and test methods of in-vehicle optical harnesses for up to 100Gbit/s communication
  • ISO/IEC 14763-3:2006 Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling
  • ISO 16129:2012 Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for assessing the day-to-day performance of an X-ray photoelectron spectrometer

ES-UNE, the light

  • UNE-EN 62496-1:2009 Optical circuit boards -- Part 1: General standard (Endorsed by AENOR in July of 2009.)
  • UNE-EN 60794-4-10:2021 Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines

Taiwan Provincial Standard of the People's Republic of China, the light

  • CNS 11332-1985 Method of Test for Fiber Optic Devices (Ambient Light Susceptibility)
  • CNS 3275-1971 Method of Test for Polymethylacrylate Corrugated Sheet (Light Penetration)
  • CNS 12788-1990 Method of X-ray Fluorescence Spectrometric Analysis of Refractory Bricks and Refractory Mortars
  • CNS 13685-1996 Digital Line Systems Based on the Synchronous Digital Hierarchy for Use on Optical Fiber Cables
  • CNS 11619-1986 General Rules for X-Ray Fluorescence Spectrometric Analysis

Indonesia Standards, the light

Professional Standard - Post and Telecommunication, the light

  • YD/T 1014-1999 Technique criterion for STM-64 optical line termina equipment
  • YD/T 1769-2008 Technical Specification for Optical Line Protection Management System
  • YD 5012-1995 Insulation Objective to Ground and Testing Method for Optical Cable Line
  • YD/T 2652-2013 10G GPON Optical Line Terminal/Optical Network Unit (OLT/ONU) single-fiber bidirectional optical component
  • YD/T 2286-2011 Single fiber bi-directional subassembly for 10Gbit/s EPON OLT/ONU
  • YD/T 1617.1-2007 Intelligent optical protect system Part 1: optical line protection system
  • YD/T 815-1996 Optical cable line monitor end-cable
  • YD/T 778-2006 Optical fiber distribution frames
  • YD/T 778-1999 Optical fibres distribution frame
  • YD/T 778-2011 Optical fiber distribution frame
  • YD/T 778-1995 Optical fiber distribution frame
  • YD/T 1714-2007 Optical Fibers Distribution Frame in Dense Wavelength Division Multiplexing
  • YD/T 1668-2007 Technical Specification for STM-64 optical fiber line system
  • YD/T 917-1999 Hardware Technology of Optical Cable Line Automatic Monitoring Station
  • YD/T 1688.5-2012 Technical specification of optical transceiver module for xPON.Part 5: Optical transceiver module for XG-PON OLT/ONU
  • YD/T 1688.3-2017 Technical specification of optical transceiver module for xPON.Part 3: Optical transceiver module for GPON OLT/ONU
  • YD/T 1688.2-2010 Technical specification of optical transceiver module for xPON.Part 2:Optical transceiver module for EPON OLT/ONU
  • YD/T 1688.3-2011 Technical specification of optical transceiver module for xPON.Part 3: Optical transceiver module for GPON OLT/ONU
  • YD/T 4114.3-2023 Optical Line Terminal (OLT) Virtualization Technical Requirements (Phase 1) Part 3: vOMCI Module Southbound Interface
  • YD/T 4114.2-2023
  • YD 5102-2005 Specifications of Engineering Design for Long-haul Optical Fiber Cable Line
  • YD 5121-2005 Acceptance Specifications for Long-Haul Optical Fiber Cable Line Project
  • YD/T 1688.1-2007 Technical Conditions of Optical Transceiver Module for XPON Part 1:Optical Transceiver Module for APON(BPON)OLT/ONU
  • YD/T 1688.4-2011 Technical specification of optical transceiver module for xPON.Part 4: optical transceiver module for 10G EPON OLT/ONU
  • YD/T 5151-2007 Design Specification of Optical Fiber Cable in the Leading-in Room
  • YD/T 5152-2007 Acceptance Specification of Optical Fiber Cable in the Leading-in Room
  • YD 5012-2003 Insulation Objective to Ground and Testing Method for Optical Cable Link
  • YD/T 5066-2005 Design Specification of Engineering for Optical Fiber Cable Automatic Monitoring System
  • YD/T 1529-2006 Technical conditions for optical fiber line auto switch Protection equipment
  • YD/T 5093-2005 Acceptance Specification of Engineering for Optical Fiber Cable Automatic Monitoring System

ETSI - European Telecommunications Standards Institute, the light

SE-SIS, the light

Canadian General Standards Board （CGSB), the light

Group Standards of the People's Republic of China, the light

American Society for Testing and Materials (ASTM), the light

  • ASTM D6194-04 Standard Test Method for Glow-Wire Ignition of Materials
  • ASTM D6194-03 Standard Test Method for Glow-Wire Ignition of Materials
  • ASTM D6567-00(2014) Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat 40;TRM41;
  • ASTM G90-98 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
  • ASTM D4329-05 Standard Practice for Fluorescent UV Exposure of Plastics
  • ASTM D4329-13 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
  • ASTM G90-05 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
  • ASTM D6194-97 Standard Test Method for Glow-Wire Ignition of Materials
  • ASTM D6194-08 Standard Test Method for Glow-Wire Ignition of Materials

(U.S.) Telecommunications Industries Association , the light

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, the light

工业和信息化部, the light

  • YD/T 2795.1-2015 Intelligent optical distribution network optical wiring facilities Part 1: Intelligent optical distribution frame
  • YD/T 3757-2020 Access network technology requires optical line terminals (OLT) that support network slicing
  • YD/T 3918-2021 Access Network Equipment Test Method Optical Line Terminal (OLT) Supporting Network Slicing
  • YD/T 4114.1-2022 Optical Line Terminal (OLT) Virtualization Technical Requirements (Phase 1) Part 1: Overall
  • YD/T 815-2015 Optical cable line monitoring tail cable for communication
  • YD/T 3116-2016 Fiber to the home user access point to home distribution box fiber optic line attenuation test method
  • JB/T 14303-2022 Wireless flash trigger
  • YD/T 1688.9-2018 xPON optical transceiver module technical conditions Part 9: Optical transceiver module for XGS-PON optical line terminal/optical network unit (OLT/ONU)
  • YD/T 1688.4-2016 xPON optical transceiver module technical conditions Part 4: Optical transceiver module for 10G EPON optical line terminal/optical network unit (OLT/ONU)
  • YD/T 1688.6-2018 xPON optical transceiver module technical conditions Part 6: Optical transceiver module for NG-PON2 stacked optical line terminal/optical network unit (OLT/ONU)
  • YD/T 1688.10-2021 xPON optical transceiver module technical conditions Part 10: Optical transceiver module for optical line terminal (OLT) where GPON and XGS-PON coexist
  • YD/T 1688.8-2018 xPON optical transceiver module technical conditions Part 8: Optical transceiver module for optical line terminal (OLT) where GPON and XG-PON coexist
  • YD/T 5093-2017 Specifications for engineering acceptance of optical cable line automatic monitoring systems
  • YD/T 5066-2017 Engineering design specifications for automatic monitoring systems for optical cable lines
  • YD/T 2795.2.2-2016 Intelligent optical distribution network optical wiring facilities Part 2: Intelligent optical cable transfer box
  • YD/T 2795.3-2015 Intelligent optical distribution network optical wiring facilities Part 3: Intelligent optical cable distribution box

Society of Automotive Engineers (SAE), the light

Danish Standards Foundation, the light

  • DS/EN IEC 60794-2-21:2021 Optical fibre cables – Part 2-21: Indoor cables – Detailed specification for multi-fibre optical distribution cables for use in premises cabling
  • DS/EN ISO 3656:2011 Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction

Japanese Industrial Standards Committee (JISC), the light

National Electrical Manufacturers Association（NEMA), the light

  • NEMA C78.379-2006 Electric Lamps - Classification of the Beam Patterns of Reflector Lamps

VE-FONDONORMA, the light

European Association of Aerospace Industries, the light

  • AECMA PREN 3845-1995 Aerospace Series, Rings, Retaining, Radial Mounting, in Corrosion Resisting Steel, Passivated Edition P 1

International Telecommunication Union (ITU), the light

KR-KS, the light

  • KS C IEC 60695-2-11-2020 Fire hazard testing — Part 2-11: Glowing/hot-wire based test methods — Glow-wire flammability test method for end-products (GWEPT)
  • KS C IEC 60695-2-13-2023 Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignition temperature(GWIT) test method for materials

Insulated Cable Engineers Association （ICEA), the light

ICEA - Insulated Cable Engineers Association Inc., the light

Electronic Components, Assemblies and Materials Association, the light

National Metrological Technical Specifications of the People's Republic of China, the light

机械工业部, the light

  • JB/T 7395.3-1994 Electrical measuring instruments terminology recording instruments and light oscilloscopes

U.S. Air Force, the light

BE-NBN, the light

  • NBN G 62-002-1975
  • NBN S 21-107-1988 Components ol automatic fire detection Systems Part 7 : Point type smoke detectors - Detectors using scattered light, transmitted light or ionization

Consumer Electronics Association （U.S.), the light

  • CEA-639-2003 Consumer Camcorder or Video Camera Low Light Performance

SAE - SAE International, the light

Underwriters Laboratories (UL), the light

IETF - Internet Engineering Task Force, the light

  • RFC 4209-2005 Link Management Protocol (LMP) for Dense Wavelength Division Multiplexing (DWDM) Optical Line Systems

Association of German Mechanical Engineers, the light

Institute of Electrical and Electronics Engineers (IEEE), the light

  • IEEE 1138-2021 IEEE Standard for Testing and Performance of Optical Ground Wire (OPGW) for use on Electric Utility Power Lines
  • IEEE Std 1138-2009 IEEE Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
  • IEEE P1138/D7, 2021 IEEE Draft Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
  • IEEE Unapproved Draft Std P1138/D13.2, Oct 2008 IEEE Draft Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
  • IEEE P1138/D6 IEEE Draft Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
  • IEEE Unapproved Draft Std P1138/D14, Jul 2009 IEEE Draft Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
  • IEEE Unapproved Draft Std P1138/D13.3, Feb, 2009 IEEE Draft Standard for Testing and Performance for Optical Ground Wire (OPGW) for Use on Electric Utility Power Lines
  • IEEE 1138-1994 Construction of composite fiber optic overhead ground wire (OPGW) for use on electric utility power lines

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, the light

  • SERIES G SUPP 46-2009 G-PON interoperability test plan between optical line terminations and optical network units (Study Group 15)
  • ITU-T G.981-1994 PDH Optical Line Systems for the Local Network - Digital Sections and Digital Line Systems (Study Group 15) 12 pp

ECIA - Electronic Components Industry Association, the light

United States Navy, the light

  • NAVY QPL-28876-QPD-2012 Connectors, Fiber Optic, Circular, Plug and Receptacle Style, Multiple Removable Termini, General Specification for
  • NAVY QPL-28876-2012 CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, GENERAL SPECIFICATION FOR

Professional Standard - Textile, the light

PL-PKN, the light

  • PN BN 6301-03-1965
  • PN-EN IEC 60794-2-21-2019-11/A1-2021-07 E Optical fibre cables--Part 2-21: Indoor cables--Detailed specification for multi-fibre optical distribution cables for use in premises cabling (IEC 60794-2-21:2019/A1:2020)
  • PN C99040-14-1991 Photography Black-and-white photographic developers Qpalitative and usable characteristic of universal li?ud developers for rontgenographic materials (radiographic)

IEC - International Electrotechnical Commission, the light

  • PAS 60794-2-21-2004 Optical fibre cables – Part 2-21: Indoor optical fibre cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling (Edition 1.0)

National Metrological Verification Regulations of the People's Republic of China, the light

  • JJG 341-1994 Verification Regulation of Grating Linear Displacement Measuring Device

U.S. Military Regulations and Norms, the light

TIA - Telecommunications Industry Association, the light

ZA-SANS, the light

  • SANS 60794-2-21:2006 Optical fibre cables Part 2-21: Indoor cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling

Lithuanian Standards Office , the light

  • LST EN 120002-2001 Blank detail specification. Infrared emitting diodes, infrared emitting diode arrays

Military Standard of the People's Republic of China-General Armament Department, the light

  • GJB 9337-2018 Surface-to-surface missile fiber optic bus protocol

未注明发布机构, the light

  • BS 7718:1996 Code of Practice for Installation offibre optic cabling

International Electrotechnical Commission (IEC), the light

  • IEC 60572:1977 Determination of the luminance distribution of electro-optical X-ray image intensifiers
  • IEC 60573:1977 Measurement of the conversion factor of electro-optical X-ray intensifiers
  • IEC 60520:1975 Entrance field sizes of electro-optical X-ray image intensifiers

(U.S.) Parachute Industry Association, the light

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the light

  the light, light intensity, light intensity, light intensity, reflected light, external light, light conditions, spectral light, Light parameters, material light, bend light, light exposure, ambient light, ambient light, fluorescent thread, night light, light wavelength, light reflection, light tube, light wavelength.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved