ZH
RU
ES

Controlled English

Controlled English, Total:500 items.

In the international standard classification, Controlled English involves: Information sciences. Publishing, Industrial automation systems, Lifting equipment, Nuclear energy engineering, Space systems and operations, Materials for aerospace construction, Electrical engineering in general, Information technology (IT) in general, Quality, Construction materials, Transport, Components for aerospace construction, Applications of information technology, Shipbuilding and marine structures in general, Water quality, Pipeline components and pipelines, Vocabularies, Telecontrol. Telemetering, Farming and forestry, Electromechanical components for electronic and telecommunications equipment, Piezoelectric and dielectric devices, Road vehicle systems, Fasteners for aerospace construction, Aerospace engines and propulsion systems, On-board equipment and instruments, Lamps and related equipment, Graphical symbols, Rubber and plastics products, Switchgear and controlgear, Character sets and information coding, Commercial vehicles, Railway rolling stock, Valves, Electronic components in general, Technical product documentation, Aerospace fluid systems and components, Screw threads, Textile machinery, Installations in buildings, Automatic controls for household use, Microbiology, MATERIALS HANDLING EQUIPMENT, Electrical accessories, Electrical wires and cables, Electromagnetic compatibility (EMC), Company organization and management, Insulating materials, Fluid power systems, Physical planning. Town planning, Open systems interconnection (OSI), Microprocessor systems, Networking, Non-metalliferous minerals, Fasteners, Bearings, Wind turbine systems and other alternative sources of energy, Protection against fire, Electric filters, Sterilization and disinfection, Components for electrical equipment, Telecommunication systems, Software development and system documentation, Power transmission and distribution networks, Audio, video and audiovisual engineering, Structures of buildings, Paper products, Air quality, Fishing and fish breeding, Shafts and couplings, Aircraft and space vehicles in general, Aerospace electric equipment and systems, Rotating machinery, Electrical and electronic testing, Electrical equipment for working in special conditions.

German Institute for Standardization, Controlled English

DIN IEC 62264-6:2019 Enterprise/Control System Integration - Part 6: Messaging Service Model (IEC 65E/616/CDV:2018); Text in English
DIN EN 16603-32-01:2022 Space engineering - Fracture control; English version EN 16603-32-01:2021
DIN EN 13557:2009 Cranes - Controls and control stations (includes Amendment A2:2008); English version of DIN EN 13557:2009-07
DIN EN 16603-32-01:2014 Space engineering - Fracture control; English version EN 16603-32-01:2014
DIN EN 16603-60-10:2014 Space engineering - Control performances; English version EN 16603-60-10:2014
DIN EN 2633:2016 Aerospace series - Aluminium alloy AL-P2024 - AlCu4Mg1 - T3511 - Extruded bars and sections - 1,2 mm <= De <= 160 mm with peripheral coarse grain control; German and English version EN 2633:2015
DIN EN 16603-70-01:2015 Space engineering - On-board control procedures; English version EN 16603-70-01:2015
DIN EN 16603-31:2014 Space engineering - Thermal control general requirements; English version EN 16603-31:2014
DIN CEN/TR 16369:2014 Use of control charts in the production of concrete; English version CEN/TR 16369:2012
DIN EN 62264-3:2017 Enterprise-control system integration - Part 3: Activity models of manufacturing operations management (IEC 62264-3:2016); English version EN 62264-3:2017
DIN 81208-22:2010 Manoeuvring of ships - Part 22: Wind tunnel test; Text in German and English
DIN EN 16602-10-09:2020 Space product assurance - Nonconformance control system; English version EN 16602-10-09:2020
DIN EN 14607-1:2006 Space engineering - Mechanical - Part 1: Thermal control; English version EN 14607-1:2004
DIN EN 16602-10-04:2014 Space product assurance - Critical-item control; English version EN 16602-10-04:2014
DIN 81208-20:2010 Manoeuvring of ships - Part 20: Rotating arm test; Text in German and English
DIN EN 4662:2010 Aerospace series - Test specification for vibration control components; German and English version EN 4662:2010
DIN EN 16602-10-09:2014 Space product assurance - Nonconformance control system; English version EN 16602-10-09:2014
DIN EN 16602-70-01:2015 Space product assurance - Cleanliness and contamination control; English version EN 16602-70-01:2014
DIN CEN/TS 17631:2021 Personal identification - Biometric group access control; English version CEN/TS 17631:2021
DIN ISO 13643-6:2018 Ships and marine technology - Manoeuvring of ships - Part 6: Model test specials (ISO 13643-6:2017); Text in German and English
DIN SPEC 91043:2021 Remote monitoring for decentralized drinking water treatment plants; Text in English
DIN 81208-21:2010 Manoeuvring of ships - Part 21: Oblique towing test; Text in German and English
DIN EN 6054:2023 Aerospace series - Collar, swage locking, shear type, in aluminium alloy 6061, conversion coating - Inch series; English version prEN 6054:2023
DIN EN 6051:2023 Aerospace series - Collar, swage locking, shear type, in aluminium alloy 3003, conversion coating - Inch series; English version prEN 6051:2023
DIN 16969:2012 Pipes made of polybutene-1 (PB-1) - PB 125 - Dimensions; Text in German and English
DIN EN 6052:2023-09 Aerospace series - Rivet-collar-system, aluminium alloy, shear type, inch series - Technical Specification; German and English version EN 6052:2022
DIN 85623:2012 Refrigerating and ventilation plants for ships - Terminology; Text in German and English
DIN EN 62264-4:2016 Enterprise-control system integration - Part 4: Object model attributes for manufacturing operations management integration (IEC 62264-4:2015); English version EN 62264-4:2016
DIN EN 16602-70-22:2015 Space product assurance - Control of limited shelf-life materials; English version EN 16602-70-22:2014
DIN EN 16602-70-58:2015 Space product assurance - Bioburden control of cleanrooms; English version EN 16602-70-58:2015
DIN 85005-3:2017 Ships and marine technology - Graphical symbols for technical documentation - Part 3: Shut-off parts, control parts and regulating parts; Text in German and English
DIN 16742:2013 Plastics moulded parts - Tolerances and acceptance conditions; Text in German and English
DIN IEC 60679-2:1997-09 Quartz crystal controlled oscillators - Part 2: Guide to the use of quartz crystal controlled oscillators (IEC 60679-2:1981)
DIN IEC 60122-2:1993-09 Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystal units for frequency control and selection; identical with IEC 60122-2:1983
DIN 65202:2012 Aerospace series - Elastomeric O-rings - Dimensions; Text in German and English
DIN 50989-2:2021 Ellipsometry - Part 2: Bulk material model; Text in German and English
DIN CEN/TS 13149-3:2011 Public transport - Road vehicle scheduling and control systems - Part 3: WorldFIP message content; English version CEN/TS 13149-3:2007
DIN EN 62264-2:2014 Enterprise-control system integration - Part 2: Objects and attributes for enterprise-control system integration (IEC 62264-2:2013); English version EN 62264-2:2013
DIN ISO 10004:2015 Quality management - Customer satisfaction - Guidelines for monitoring and measuring (ISO 10004:2012); Text in German, English and French
DIN EN 16603-34:2014 Space engineering - Part 34: Environmental control and life support (ECLS); English version EN 16603-34:2014
DIN ISO 18414:2012 Acceptance sampling procedures by attributes - Accept-zero sampling system based on credit principle for controlling outgoing quality (ISO 18414:2006); Text in German and English
DIN CEN/TS 13149-6:2005 Public transport - Road vehicle scheduling and control systems - Part 6: CAN message content; English version CEN/TS 13149-6:2005
DIN EN 61131-10:2017 Programmable controllers - Part 10: XML Exchange Formats for Programs according to IEC 61131-3 (IEC 65B/1070/CD:2017); Text English
DIN ISO/TS 10004:2011 Quality management - Customer satisfaction - Guidelines for monitoring and measuring (ISO/TS 10004:2010); Text in German, English and French
DIN EN 62264-5:2017 Enterprise-control system integration - Part 5: Business to manufacturing transactions (IEC 62264-5:2016); English version EN 62264-5:2016
DIN EN 62264-5:2012 Enterprise system integration - Part 5: Business to manufacturing transactions (IEC 62264-5:2011); English version EN 62264-5:2012
DIN 16968:2012 Pipes made of Polybutene-1 (PB-1) - PB 125 - General quality requirements and testing; Text in German and English
DIN EN 4551:2015 Aerospace series - Pipe coupling, 37°, in heat resisting steel - Swivel nuts - Inch series; German and English version EN 4551:2014
DIN EN 16603-33-01:2019 Space engineering - Mechanisms; English version EN 16603-33-01:2019
DIN ISO 26243:2009 Card for staple fibres spinning - Vocabulary and principles of construction (ISO 26243:2007); Text in German and English
DIN EN 14908-4:2014 Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 4: IP Communication; English version EN 14908-4:2014
DIN EN 16602-70-36:2015 Space product assurance - Material selection for controlling stress-corrosion cracking; English version EN 16602-70-36:2014
DIN EN 16603-70-31:2015 Space engineering - Ground systems and operations - Monitoring and control data definition; English version EN 16603-70-31:2015
DIN EN 60870-6-802:2003 Telecontrol equipment and systems - Part 6-802: Telecontrol protocols compatible with ISO standards and ITU-T recommendations; TASE.2 object models (IEC 60870-6-802:2002); German version EN 60870-6-802:2002, text in English
DIN 58959-17:2011 Medical microbiology - Quality management in medical microbiology - Part 17: Requirements for the use of control strains for the examination of mycobacteria; Text in German and English
DIN EN 12896-4:2020 Public transport - Reference data model - Part 4: Operations monitoring and control; English version EN 12896-4:2019, only on CD-ROM
DIN 8074:2011 Polyethylene (PE) - Pipes PE 80, PE 100 - Dimensions; Text in German and English
DIN EN 6069:2011 Aerospace series - Rivet, 100° reduced flush head, close tolerance - Inch series; German and English version EN 6069:2009
DIN 8075:2018 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN EN 16662-3:2023-10 Road vehicles - Supplementary grip devices for tyres of passenger cars and light duty vehicles - Part 3: Production control (self monitoring) and third-party surveillance; English version prEN 16662-3:2023 / Note: Date of issue 2023-08-25
DIN EN 3182:2012 Aerospace series - Ball bearings, rigid in corrosion resisting steel cadmium plated, for control cable pulleys - Dimensions and loads; German and English version EN 3182:2012
DIN IEC 60122-2:1993 Quartz crystal units for frequency control and selection; part 2: guide to the use of quartz crystal units for frequency control and selection; identical with IEC 60122-2:1983
DIN EN 14908-2:2014 Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 2: Twisted Pair Communication; English version EN 14908-2:2014
DIN EN 6076:2017 Aerospace series - Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C) - Inch series; German and English version EN 6076:2017
DIN CWA 17301:2021 City Resilience Development - Maturity Model; English version CWA 17301:2018
DIN EN 61158-6-20:2013 Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specification - Type 20 elements (IEC 61158-6-20:2010); English version EN 61158-6-20:2012, only on CD-ROM
DIN EN 61158-6-20:2015 Industrial communication networks - Fieldbus specifications - Part 6-20: Application layer protocol specification - Type 20 elements (IEC 61158-6-20:2014); English version EN 61158-6-20:2014, only on CD-ROM
DIN ETS 300273:1994 Network Aspects (NA) - Metropolitan Area Network (MAN) - Medium Access Control (MAC) layer management; English version ETS 300273:1994
DIN EN 60870-6-503:2003 Telecontrol equipment and systems - Part 6-503: Telecontrol protocols compatible with ISO standards and ITU-T recommendations; TASE.2 services and protocol (IEC 60870-6-503:2002); German version EN 60870-6-503:2002, text in English
DIN EN 61400-25-2:2016 Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models (IEC 61400-25-2:2015); English version EN 61400-25-2:2015
DIN EN 12101-7:2011 Smoke and heat control systems - Part 7: Smoke duct sections; German version EN 12101-7:2011
DIN ISO 13643-5:2018 Ships and marine technology - Manoeuvring of ships - Part 5: Submarine specials (ISO 13643-5:2017); Text in German and English
DIN EN 4552:2015 Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Straight nipples, welded end - Inch series; German and English version EN 4552:2015
DIN EN 14908-3:2014 Open Data Communication in Building Automation, Controls and Building Management - Control Network Protocol - Part 3: Power Line Channel Specification; English version EN 14908-3:2014
DIN EN 169200:1996-05 Sectional specification: Quartz crystal controlled oscillators (Qualification approval); German version EN 169200:1995
DIN ETS 300274:1994 Network Aspects (NA) - Metropolitan Area Network (MAN) - Conformance specification for the Medium Access Control (MAC) layer management; English version ETS 300274:1994
DIN EN IEC 61131-10:2020 Programmable controllers - Part 10: PLC open XML exchange format (IEC 61131-10:2019); English version EN IEC 61131-10:2019
DIN V 44366:2004 Specification for Representation of process control engineering requests in P&I Diagrams and for data exchange between P&ID tools and PCE-CAE tools, text English
DIN EN 13611:2017 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements; German and English version prEN 13611:2017
DIN EN 61227:2016 Nuclear power plants - Control rooms - Operator controls (IEC 61227:2008); German version EN 61227:2016
DIN EN 2486:2006 Aerospace series - Aluminium alloy AL-P2618A - Forging stock; German and English version EN 2486:2005
DIN 85005-1:2017 Ships and marine technology - Graphical symbols for technical documentation - Part 1: Generalities and types of actuation; Text in German and English
DIN EN 61400-25-3:2016 Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models (IEC 61400-25-3:2015); English version EN 61400-25-3:2015
DIN EN 62827-2:2018 Wireless power transfer - Management - Part 2: Multiple device control management (IEC 62827-2:2017); English version EN 62827-2:2017
DIN ETS 300102-1:1992-02 Integrated Services Digital Network (ISDN); user-network interface layer 3; specification for basic call control; english version ETS 300102-1:1990
DIN EN 14908-7:2018 Open communication in building automation, controls and building management - Control Network Protocol - Part 7: Communication via internet protocols; English version prEN 14908-7:2018
DIN 16742 Berichtigung 1:2014 Plastics moulded parts - Tolerances and acceptance conditions; Text in German and English, Cori gendum to DIN 16742:2013-10
DIN EN 14592:2009 Timber structures - Dowel-type fasteners - Requirements; English version of DIN EN 14592:2009-02
DIN 65100:2021 Aerospace series - Wire thread inserts, screw-locking, copper alloy - Class: 490 MPa/300 °C; Text in German and English
DIN EN 10204:2005-01 Metallic products - Types of inspection documents; German version EN 10204:2004
DIN EN 6050:2023 Aerospace series - Pin, close tolerance, swage locking, 100？ countersunk reduced head, shear type, in aluminium alloy 7050, conversion coating - Inch series; English version prEN 6050:2023
DIN 14507-2:2008 Command and control appliances - Part 2: Command and control car ELW 1
DIN 14507-3:2008 Command and control appliances - Part 3: Command and control car ELW 2
DIN EN 17141:2021 Cleanrooms and associated controlled environments - Biocontamination control; German version EN 17141:2020
DIN EN ISO 16484-5:2012 Building automation and control systems - Part 5: Data communication protocol (ISO 16484-5:2012); English version EN ISO 16484-5:2012, only on CD-ROM
DIN EN ISO 16484-5:2014 Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO 16484-5:2014); English version EN ISO 16484-5:2014, only on CD-ROM
DIN CWA 16597:2013 FishBizz Business Case - For monitoring of quality and sales of fish products; English version CWA 16597:2013
DIN 8075:2011 Polyethylene (PE) pipes - PE 80, PE 100 - General quality requirements, testing; Text in German and English
DIN EN 6075:2017 Aerospace series - Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C) - Inch series; German and English version EN 6075:2017
DIN ISO 13643-4:2018 Ships and marine technology - Manoeuvring of ships - Part 4: Stopping, acceleration, traversing (ISO 13643-4:2017); Text in German and English
DIN ISO 13643-2:2018 Ships and marine technology - Manoeuvring of ships - Part 2: Turning and yaw checking (ISO 13643-2:2017); Text in German and English
DIN EN 62386-102:2016 Digital addressable lighting interface - Part 102: General requirements - Control gear (IEC 62386-102:2014); English version EN 62386-102:2014
DIN EN 62386-103:2016 Digital addressable lighting interface - Part 103: General requirements - Control devices (IEC 62386-103:2014); English version EN 62386-103:2014

ISUZU - Isuzu Motors Ltd., Controlled English

ISC-A240-1992 Shape Steel (Japanese/English Version)
ISD-V01-005A-2001 Air Brake Hose Assemblies (Japanese/English Version)
ISD-V01-500D-2012 Air brake hose assemblies (Japanese/English Version)
ISD-G05-001A-2001 Flareless Type Tube Fittings for Automobiles (Japanese/English Version)
ISD-V01-007A-2000 Critical Parts: Hydraulic Brake Hose Assemblies (Japanese/English Version)
ISC-F12-012-1982 Method of Measuring Tensile Strength of Brake Drums (Japanese/English Version)
ISC-C92-023A-2009 Polypropylene resin for stamping molding (English/Japanese Version; ISUZU RESTRICTED/CONFIDENTIAL STANDARD –
ISC-F20-011A-2011 Test Method for Color Fastness to Rubbing by GAKUSHIN-Type Tester (Japanese/English Version)

British Standards Institution (BSI), Controlled English

BS 1000[681.5]:1976 Universal Decimal Classification - English full edition - Automatic control engineering
BS 1000[656]:1982 Universal Decimal Classification - English full edition - Transport and postal services - Traffic organization and control
BS EN 2143:1993 Rivets, solid, universal head, in aluminium 1050A, inch based series
BS EN 2148:1993 Rivets, solid, universal head, in aluminium alloy 5056A, inch based series
BS EN 2146:1993 Rivets, solid, universal head, in aluminium alloy 2017A, inch based series
BS 1000[368]:1971 Universal Decimal Classification. English full edition - Insurance
BS 1000[654]:1983 Universal Decimal Classification - English full edition - Telecommunication and telecontrol (organization, services)
BS 1000[35/354]:1972 Universal Decimal Classification. English full edition - Public administration
BS ISO 26869:2012 Space systems. Small-auxiliary-spacecraft (SASC) to-launch-vehicle interface control document
BS EN 2550:1993 Rivets, solid 100 ° normal countersunk head, in aluminium 1050A, inch based series
PD 6673-2002 PNO-ISC Information Document 015 ISUP Overload Controls
BS ISO/IEC 10538:1991 Information technology - Control functions for text communication
BS EN 61512-1:1999 Batch control. Models and terminology

AT-OVE/ON, Controlled English

OVE EN IEC 62264-6:2020 Enterprise-control system integration - Part 6: Messaging service model (IEC 65E/706/FDIS) (english version)
OVE EN IEC 62954:2021 Nuclear power plants - Control rooms - Requirements for emergency response facilities (english version)
OVE EN IEC 63206:2021 Industrial-Process control systems - Recorders (IEC 65B/1204/CDV) (english version)
OVE EN IEC 62442-1:2021 Energy performance of lamp controlgear - Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of controlgear (IEC 34C/1529/CDV) (english version)
OVE EN IEC 62271-212:2021 High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) (IEC 17C/790/CDV) (english version)
OVE EN IEC 62442-3:2021 Energy performance of lamp controlgear - Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method of measurement to determine the efficiency of controlgear (IEC 34C/1531/CDV) (english version)
OVE EN IEC 61131-10:2020 Programmable controllers - Part 10: PLC open XML exchange format (IEC 61131-10:2019) (english version)
OVE EN IEC 61131-9:2021 Programmable controllers - Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) (IEC 65B/1199/CDV) (english version)
OVE EN 50089-2021 Cast resin partitions for metal enclosed gas-filled high-voltage switchgear and controlgear (english version)
OVE EN 50187-2021 High-voltage switchgear and controlgear - Gas-filled compartments of AC switchgear and controlgear with rated voltages above 1 kV up to and including 52 kV (english version)
OVE EN IEC 62386-102:2021 Digital addressable lighting interface - Part 102: General requirements - Control gear (IEC 34/842/CDV) (english version)
OVE EN IEC 62386-103:2021 Digital addressable lighting interface - Part 103: General requirements - Control devices (IEC 34/841/CDV) (english version)
OVE EN IEC 62442-2:2021 Energy performance of lamp controlgear - Part 2: Controlgear for discharge lamps (excluding low-pressure mercury fluorescent lamps) - Method of measurement to determine the efficiency of controlgear (IEC 34C/1530/CDV) (english version)
OVE EN IEC 62541-5:2021 OPC Unified Architecture - Part 5: Information Model (english version)
OVE EN IEC 60684-3-282:2021 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 282: Heat-shrinkable, polyolefin sleeving - Stress control (IEC 15/947/CDV) (english version)
OVE EN IEC 62541-3:2021 OPC Unified Architecture - Part 3: Address Space Model (english version)
OVE EN IEC 60730-2-14/A2:2021 Automatic electrical controls - Part 2-14: Particular requirements for electric actuators (IEC 72/1258/CDV) (Amendment) (english version)
OVE EN IEC 62271-202:2021 High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation (IEC 17C/781/CDV) (english version)

Society of Automotive Engineers (SAE), Controlled English

SAE AS8879D-2018 Screw Threads - UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter
SAE AS8879C-2003 (R) Screw Threads - UNJ Profile, Inch Controlled Radius Root with Increased Minor Diameter FSC THDS
SAE J1939-2023 Serial Control and Communications Heavy-Duty Vehicle Network - Top-Level Document
SAE ARP4874A-2013 Electronic Propulsion Control/Aircraft Interface Control Documents
SAE J1939-2011 Serial Control and Communications Heavy Duty Vehicle Network Top Level Document
SAE ARP4874-1995 Electronic Propulsion Control/Aircraft Interface Control Documents
SAE J1946-2001 Companion Flanges, Type A (External Pilot) and Type S (Internal Pilot)
SAE AIR6181A-2021 Electronic Propulsion Control System/Aircraft Interface Control Documents
SAE TS221-2-2005 TS221 Specification for Manufacture and Performance Testing of Quick Release Pins (Ball Type) Imperial (Inch Units)
SAE AIR6181-2011 Electronic Propulsion Control System/Aircraft Interface Control Documents
SAE J1939-2013 Serial Control and Communications Heavy Duty Vehicle Network - Top Level Document
SAE ARP935A-2003 Control Plan/Technical Construction File
SAE ARP935B-2013 Control Plan/Technical Construction File
SAE J1922-2000 Powertrain Control Interface for Electronic Controls Used in Medium- and Heavy-Duty Diesel On-Highway Vehicle Applications
SAE AS498-4-1941 AS498 Inscriptions for Pull Control Knob (AS496)
SAE AS24464A-2005 (R) BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, SELF-ALIGNING, TYPE IV, ANTIFRICTION, INCH FSC 3110
SAE AS24461D-2021 BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I, ANTIFRICTION, INCH
SAE AS20708/21-1999 Synchro, Control Transformer, Type 15CT6D
SAE AS2244-3-1942 AS2244 Control Handwheel (3/4 Full Type)
SAE AS21439B-2012 Bearing, Roller, Needle, Double Row, Heavy Duty, Track Roller, Sealed, Type VI, Inch
SAE AS24466-2002 Bearing, Roller, Needle-Double Row, Heavy Duty, Track Roller, Type VI, Antifriction, Inch FSC 3110
SAE AS27400-4-1988 AS27400-449 Adaptor, Straight, Pipe (for Inch Pipes)
SAE AS27350-4-1988 AS27350-399 Adaptor, Straight, Pipe (for Inch Pipes)
SAE AS20708/1A-2011 Synchro, Control Transformer, Type 11CT4E
SAE AS20708/29A-2011 Synchro, Control Transformer, Type 18CT4C
SAE AS20708/79A-2011 Synchro, Control Transformer, type 26V-08CT4C

Professional Standard - Machinery, Controlled English

JB/T 7390-1994 Lettering symbol of distributed control system
JB/T 7813-1995 DJK-7500 Distributed Control System Software and Hardware Product Documentation
JB 8141.1-1995 Shipboard control cables shipboard ethylene-propylene rubber insulated control cables, Type DA
JB/T 9268-1999 Terms for distributed control system
JB/T 5052-1991 Method for designating types of decentralized control system

Professional Standard - Electron, Controlled English

SJ/Z 9085-1987 Basic mode control procedures - session-based information message transfer
SJ/T 11417-2010 GPS interface control document
SJ/T 11418-2010 Interface control document of GLONASS
SJ/Z 9158-1987 Temperature control unit for quartz crystal elements
SJ/Z 9152.2-1987 Quartz crystal elements for frequency control and selection Part 2: Guide to the use of quartz crystal elements for frequency control and selection
SJ/Z 9084-1987 Basic mode control procedures - supplement

Society of Motion Picture and Television Engineers (SMPTE), Controlled English

SMPTE ST 230M-1996 Television Analog Recording - 1/2-in Type L - Electrical Parameters, Control Code and Tracking Control
SMPTE 251M-1996 Television Analog Recording - 1/2-in Type M-2 - Electrical Parameters of Video, Audio, Time and Control Code and Tracking Control
SMPTE ST 251M-1996 Television Analog Recording - 1/2-in Type M-2 - Electrical Parameters of Video, Audio, Time and Control Code and Tracking Control
SMPTE RP 85-1999 Tracking-Control Record for 1-in Type C Helical-Scan Television Tape Recording
SMPTE RP 83-1996 Specifications of Tracking-Control Record for 1-in Type B Helical-Scan Television Analog Recording
SMPTE RP 93-1999 Requirements for Recording American National Standard Time and Control Code on 1-in Type B Helical-Scan Video Tape Recorders
SMPTE 6-1998 Video Recording - 2-in Quadruplex Tape - Video, Audio and Tracking-Control Records
SMPTE ST 6-1998 Video Recording - 2-in Quadruplex Tape - Video, Audio and Tracking-Control Records

Professional Standard - Aerospace, Controlled English

QJ 1912.5-1999 Change Control of Software Documentation in Aerospace Model Software Documentation Management System

GM Global, Controlled English

GMW 3064-2011 Performance Validation of Automatic Climate Control Issue 2; English
GMW 16734-2011 Testing of OEM Dual Foot Controls for Auto School Cars Issue 1; English
GMW 15563-2012 Joining and Dispense Process Control Procedure Issue 3; English
GMW 16688-2012 Performance Requirements ?Exterior Adaptive Cruise Control Emblem Issue 1; English
GMW 16551-2011 Metric Screw Threads Issue 1; English
GMW 14551-2011 Electronic Throttle Control Pedal Lab Durability Test Issue 2; English
GMW 16072-2011 DOT 3 Brake Fluid Issue 1; English
GMW 16625-2011 Preparation of Acid Rain Solution Issue 1; English
GMW 3179-2013 Protective Finishes - Zinc Phosphate Type Issue 6; English [Replaced: GMW GMW3179]

Association Francaise de Normalisation, Controlled English

NF S81-550:2017 Horlogerie - Méthode de contrôle de la qualité des montres à quartz

ISA - International Society of Automation, Controlled English

ISA RP60.4-1990 Documentation for Control Centers
ISA INSTR CNTRL SYS DOCMNT-2011 Instrumentation and Control Systems Documentation (Second Edition)
ISA 75.01-1985 Flow Equations for Sizing Control Valves

未注明发布机构, Controlled English

DIN IEC 679-2:1997 Quartz crystal controlled oscillators; Part 2; Guide to the use of quartz crystal controlled oscillators
DIN EN ISO 8847 A100:2017 Small craft – Control system – Cable and pulley controls (ISO 8847:2004); German version EN ISO 8847:2017; Amendment A100
DIN EN 62056-53 Berichtigung 1:2003 Electrical energy measurement – Meter reading transmission, tariff and load control – Part 53: COSEM application layer (IEC 62056-53:2002); German version EN 62056-53:2002, text in English
DIN EN 28848 A100:2017 Small craft – Control systems (ISO 8848:1990); German version EN ISO 8848:2017; Amendment A100
DIN EN ISO 15652 A100:2017 Small craft – Control systems for minijet boats (ISO 15652:2003); German version EN ISO 15652:2017; Amendment A100

SAE - SAE International, Controlled English

SAE ARP4874A-1995 Electronic Propulsion Control/Aircraft Interface Control Documents
SAE J1946-1991 Companion Flanges@ Type A (External Pilot) and Type S (Internal Pilot
SAE J1946-1990 COMPANION FLANGES@ TYPE A (EXTERNAL PILOT) AND TYPE S (INTERNAL PILOT)
SAE J1946-2016 Companion Flanges@ Type A (External Pilot) and Type S (Internal Pilot)
SAE ARP935A-1998 Control Plan/Technical Construction File
SAE J1922-2008 Powertrain Control Interface for Electronic Controls Used in Medium and Heavy-Duty Diesel On-Highway Vehicle Applications
SAE J1922-1989 Powertrain Control Interface for Electronic Controls Used in Medium and Heavy-Duty Diesel On-Highway Vehicle Applications
SAE AS20708/39A-2011 Synchro@ Control Transformer@ Type 19CTB4B
SAE AS20708/25A-2011 Synchro@ Control Transformer@ Type 16CTB4B
SAE AS20708/20A-2011 Synchro@ Control Transmitter@ Type 15CDX6C
SAE AS20708/39B-2011 Synchro@ Control Transformer@ Type 19CTB4B
SAE AS20708/2-1999 Synchro@ Control Transmitter@ Type 11CX4E
SAE AS20708/2A-2011 Synchro@ Control Transmitter@ Type 11CX4E
SAE AS20708/53A-2011 Synchro@ Control Transformer@ Type 23CT6D
SAE AS20708/1-1999 Synchro@ Control Transformer@ Type 11CT4E
SAE AS20708/46A-2011 Synchro@ Control Transformer@ Type 23CT4C
SAE AS20708/53-1999 Synchro@ Control Transformer@ Type 23CT6D
SAE AS20708/28A-2011 Synchro@ Control Transmitter@ Type 18CX4D
SAE AS20708/33A-2011 Synchro@ Control Transmitter@ Type 18CX6C
SAE AS20708/45-1999 Synchro@ Control Transmitter@ Type 23CX4D
SAE AS20708/34-1999 Synchro@ Control Transformer@ Type 18CT6D
SAE AS20708/34A-2011 Synchro@ Control Transformer@ Type 18CT6D
SAE AS20708/52A-2011 Synchro@ Control Transmitter@ Type 23CX6D
SAE AS20708/45A-2011 Synchro@ Control Transmitter@ Type 23CX4D
SAE AS20708/15-1999 Synchro@ Control Transformer@ Type 15CT4C
SAE AS20708/33-1999 Synchro@ Control Transmitter@ Type 18CX6C
SAE AS20708/21A-2011 Synchro@ Control Transformer@ Type 15CT6D
SAE AS20708/14A-2011 Synchro@ Control Transmitter@ Type 15CX4D
SAE AS20708/131A-2011 Synchro@ Control Transmitter@ Type 15CX4F
SAE AS20708/39-2004 Synchro@ Control Transformer@ Type 19CTB4b
SAE AS20708/25-2004 Synchro@ Control Transformer@ Type 16CTB4b
SAE AS20708/1B-2016 Synchro@ Control Transformer@ Type 11CT4E
SAE AS20708/52-1999 Synchro@ Control Transmitter@ Type 23CX6D
SAE AS20708/15A-2011 Synchro@ Control Transformer@ Type 15CT4C
SAE AS20708/2B-2016 Synchro@ Control Transmitter@ Type 11CX4E
SAE AS20708/34B-2016 Synchro@ Control Transformer@ Type 18CT6D
SAE AS20708/46B-2017 Synchro@ Control Transformer@ Type 23CT4C
SAE AS20708/14B-2016 Synchro@ Control Transmitter@ Type 15CX4D
SAE AS20708/20B-2016 Synchro@ Control Transmitter@ Type 15CDX6C
SAE AS20708/33B-2016 Synchro@ Control Transmitter@ Type 18CX6C
SAE AS20708/21B-2016 Synchro@ Control Transformer@ Type 15CT6D
SAE AS20708/45B-2016 Synchro@ Control Transmitter@ Type 23CX4D
SAE AS20708/39C-2017 Synchro@ Control Transformer@ Type 19CTB4B
SAE AS20708/131B-2017 Synchro@ Control Transmitter@ Type 15CX4F
SAE AS20708/53B-2017 Synchro@ Control Transformer@ Type 23CT6D
SAE AS20708/28B-2016 Synchro@ Control Transmitter@ Type 18CX4D
SAE AS20708/25B-2017 Synchro@ Control Transformer@ Type 16CTB4B
SAE AS20708/15B-2017 Synchro@ Control Transformer@ Type 15CT4C
SAE AS20708/29B-2016 Synchro@ Control Transformer@ Type 18CT4C
SAE AS20708/52B-2017 Synchro@ Control Transmitter@ Type 23CX6D
SAE AS24464B-2016 (R) BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, SELF-ALIGNING, TYPE IV, ANTIFRICTION, INCH FSC 3110
SAE AS24461-1998 Bearing@ Roller@ Needle@ Single Row@ Heavy Duty@ Type I@ Antifriction@ Inch (FSC 3110)
SAE AS24461A-1998 Bearing@ Roller@ Needle@ Single Row@ Heavy Duty@ Type I@ Antifriction@ Inch (FSC 3110)
SAE AS21439-1998 Bearing@ Roller@ Needle@ Double Row@ Heavy Duty@ Track Roller@ Sealed@ Type VI@ Inch
SAE AS20708/139-2004 SYNCHRO CONTROL TRANSMITTER@ TYPE 31CX6a
SAE AS20708/139A-2011 SYNCHRO CONTROL TRANSMITTER@ TYPE 31CX6a
SAE AS20708/8A-2011 Synchro@ Control Transmitter@ Type 26V-11CX4C
SAE AS20708/78A-2011 Synchro@ Control Transmitter@ Type 26V-08CX4C
SAE AS20708/7A-2011 Synchro@ Control Transformer@ Type 26V-11CT4D
SAE AS20708/8B-2016 Synchro@ Control Transmitter@ Type 26V-11CX4C
SAE AS20708/7B-2017 Synchro@ Control Transformer@ Type 26V-11CT4D
SAE AS20708/139B-2017 SYNCHRO CONTROL TRANSMITTER@ TYPE 31CX6a
SAE AS20708/78B-2017 Synchro@ Control Transmitter@ Type 26V-08CX4C
SAE AS20708/79B-2017 Synchro@ Control Transformer@ Type 26V-08CT4C
SAE AS20708/36A-2011 Synchro@ Control Differential Transmitter@ Type 18CDX6D
SAE AS20708/16A-2011 Synchro@ Control Differential Transmitter@ Type 15CDX4D
SAE AS20708/30A-2011 Synchro@ Control Differential Transmitter@ Type 18CDX4C
SAE AS20708/81B-2017 Synchro@ Control Differential Transmitter@ Type 11CDX4B
SAE AS20708/54A-2011 Synchro@ Control Differential Transmitter@ Type 23CDX6C
SAE AS20708/30-1999 Synchro@ Control Differential Transmitter@ Type 18CDX4C
SAE AS20708/81A-2011 Synchro@ Control Differential Transmitter@ Type 11CDX4B
SAE AS20708/47A-2011 Synchro@ Control Differential Transmitter@ Type 23CDX4C
SAE AS20708/22A-2011 Synchro@ Control Differential Transmitter@ Type 15CDX6C
SAE AS20708/36-1999 Synchro@ Control Differential Transmitter@ Type 18CDX6D
SAE AS20708/22-1999 Synchro@ Control Differential Transmitter@ Type 15CDX6C
SAE AS20708/16-1999 Synchro@ Control Differential Transmitter@ Type 15CDX4D
SAE AS20708/36B-2016 Synchro@ Control Differential Transmitter@ Type 18CDX6D
SAE AS20708/22B-2017 Synchro@ Control Differential Transmitter@ Type 15CDX6C
SAE AS20708/47B-2017 Synchro@ Control Differential Transmitter@ Type 23CDX4C
SAE AS20708/54B-2017 Synchro@ Control Differential Transmitter@ Type 23CDX6C
SAE AS20708/16B-2017 Synchro@ Control Differential Transmitter@ Type 15CDX4D
SAE AS20708/30B-2016 Synchro@ Control Differential Transmitter@ Type 18CDX4C

Group Standards of the People's Republic of China, Controlled English

T/GARRPA 006-2023 The techinical regulations for disease control of silkworms (bombyx mori)
T/ZZB 0689-2018 V type control ball valves
T/HNCAA 046-2023 Document control of Inspection and inspection organization

Aerospace Industries Association/ANSI Aerospace Standards, Controlled English

AIA/NAS NAS 121-1963 Knob-Control, 1 Inch Spherical (Rev. 5)
AIA/NAS NAS121-2012 KNOB, CONTROL, 1 INCH SPHERICAL (Rev 6)

PL-PKN, Controlled English

PN T01029-1985 Quartz crystal controlled oscillators Terminology

Japanese Industrial Standards Committee (JISC), Controlled English

JIS C 6710:1995 General rules of quartz crystal controlled oscillators

ANSI - American National Standards Institute, Controlled English

X9/TG-6-2000 Quality Control of MICR Documents
X9/TG-6-1995 Quality Control of MICR Documents
INCITS/ISO/IEC 10538:1991 Information technology - Control functions for text communication

Korean Agency for Technology and Standards (KATS), Controlled English

KS X 1019-1994(2019) Control functions for text communication
KS C IEC 60122-2-2003(2018)
KS C 5929-1994 Control functions for text communication
KS C IEC 60122-2:2003 Quartz crystal units for frequency control and selection－Part 2：Guide to the use of quartz crystal units for frequency control and selection
KS C IEC 60122-2-1:2011 Quartz crystal units for frequency control and selection－Part 2：Guide to the use of quartz crystal units for frequency control and selection－Section one：Quartz crystal units for microprocessor clock supply

European Standard for Electrical and Electronic Components, Controlled English

EN 169000:1992 Generic specification: quartz crystal controlled oscillatores
CECC 63 101- 040 ISSUE 1-1991 NL CECC 63 101-040 Issue 1; CATV Hybrid Module Manufacturer's Type Number BGD102E (En)

Electronic Industrial Alliance (U.S.), Controlled English

EIA CB6-A-1987 Guide for the Use of Quartz Crystal Units for Frequency Control

ECIA - Electronic Components Industry Association, Controlled English

CB6-A-1987 Guide for the Use of Quartz Crystal Units for Freqency Control

VN-TCVN, Controlled English

TCVN 4212-1986 Technological documents.Rules of making control documentation.Chart of measurement
TCVN 4210-1986 System of technological documents.Rules of making documents on technical control
TCVN 4211-1986 Technological documents.Rules of making control documents.Register for technological process check

SE-SIS, Controlled English

SIS SMS 1961-1969 Wing screws. Inch screw threads. Coarse pitch
SIS SMS 1939-1969 Domed cap nuts. Inch screw threads. Coarse pitch
SIS SMS 1821-1955
SIS SMS 1826-1955
SIS SMS 1806-1955
SIS SMS 1809-1955
SIS SMS 1815-1955
SIS SMS 1812-1955
SIS SMS 1824-1955
SIS SMS 1962-1969 Expansion-shell bolt. Inch screw threads. Coarse pitch

American National Standards Institute （ANSI), Controlled English

BS ISO 24355:2023 Flight control system for civil small and light multicopter unmanned aircraft system (UAS). General requirements (British Standard)
PD CEN ISO/TS 11137-4:2023 Sterilization of health care products. Radiation Guidance on process control (British Standard)
ANSI/INCITS/ISO/IEC 10538:1991 Information Technology - Control Functions for Text Communication
ANSI/ISA 5.06.01-2007 Functional Requirements Documentation for Control Software Applications
ANSI/ABMA 22.2-1988 Spherical Plain Radial Bearings, Joint Type - Inch Design
ANSI/AGMA 9008-B-1999 Flexible Couplings - Gear Type, Flange Dimensions - Inch Series

AIA/NAS - Aerospace Industries Association of America Inc., Controlled English

NAS121-1963 Knob-Control@ 1 Inch Spherical (Rev 5)
NAS380-1997 NAS Documents Preparation and Maintenance in the Inch System of Units (Rev 14)
NAS380-1992 NAS Documents Preparation and Maintenance in the Inch System of Units (Rev 13)
NAS380-2010 NAS DOCUMENTS@ PREPARATION AND MAINTENANCE@ IN THE INCH SYSTEM OF UNITS (Rev 16)
NAS380-2011 NAS DOCUMENTS@ PREPARATION AND MAINTENANCE@ IN THE INCH SYSTEM OF UNITS (Rev 17)
NAS380-2016 NAS DOCUMENTS@ PREPARATION AND MAINTENANCE@ IN THE INCH SYSTEM OF UNITS (Rev 18)
NAS380-2009 NAS DOCUMENTS@ PREPARATION AND MAINTENANCE@ IN THE INCH SYSTEM OF UNITS (Rev 15)

Lithuanian Standards Office , Controlled English

LST EN 169000+A1-2001 Generic Specification: Quartz crystal controlled oscillators
LST EN 169100-2003 Sectional specification: Quartz crystal controlled oscillators (Capability approval)

RU-GOST R, Controlled English

GOST 14.206-1973 Technological inspection of design documentation
GOST 6111-1952 Conical pipe thread. Profile, basic dimensions and tolerances
GOST 3.1116-1979 Unified system of technological documentation. Normocontrol
GOST 3.1116-2011 Unified system for technological documentation. Normocontrol
GOST R 59648-2021 Braille displays. Technical requirements and control methods

GM Europe, Controlled English

GME B 040 1263-2013 Corrosion inhibiting foil for Steel and Ferrous Metals (English/German)
GME B 040 2109-2013 Corrosion inhibiting foil for Copper and Copper Alloys (Issue 1; English/German)
GME 03002-1993 Ball Joint Housing Made of Ferritic Nodular Cast Iron (English/German)

Aerospace Industries Association, Controlled English

AIA NAS 380-1997 NAS Documents Preparation and Maintenance in the Inch System of Units FSC CMAN; Revision 14
AIA NAS 121-1963 Knob-Control, 1 Inch Spherical (Rev. 5) R(1992)

International Electrotechnical Commission (IEC), Controlled English

IEC 60314:1970 Temperature control devices for quartz crystal units
IEC 60122-2:1983 Quartz crystal units for frequency control and selection. Part 2 : Guide to the use of quartz crystal units for frequency control and selection

U.S. Military Regulations and Norms, Controlled English

ARMY MIL-T-10160 A (1)-1953 TRAILER, DIRECTOR, M22
ARMY MIL-T-10160 A-1952 TRAILER, DIRECTOR, M22
ARMY MIL-S-10685 A-1955 SYSTEM, FIRE CONTROL, T38
ARMY MIL-P-63224 A NOTICE 1-1996 PROJECTILE, GUIDED, 155MM, M712 GUIDANCE SECTION FOR
ARMY MIL-P-63224 A (2)-1989 PROJECTILE, GUIDED, 155MM, M712 GUIDANCE SECTION FOR
ARMY MIL-P-63224 A-1986 PROJECTILE, GUIDED, 155MM, M712 GUIDANCE SECTION FOR
ARMY MIL-P-63225 A NOTICE 1-1996 PROJECTILE, GUIDED, 155MM, M712 CONTROL SECTION FOR
ARMY MIL-P-63225 A (4)-1990 PROJECTILE, GUIDED, 155MM, M712 CONTROL SECTION FOR
ARMY MIL-P-63225 A-1984 PROJECTILE, GUIDED, 155MM, M712 CONTROL SECTION FOR
ARMY MIL-Q-46315 C NOTICE 1-1998 QUADRANT, FIRE CONTROL: M15
ARMY MIL-Q-46315 C (2)-1987 QUADRANT, FIRE CONTROL: M15
ARMY MIL-Q-46315 C-1972 QUADRANT, FIRE CONTROL: M15
ARMY MIL-Q-48555 A NOTICE 1-1997 QUADRANT, FIRE CONTROL: M17
ARMY MIL-Q-48555 A-1989 QUADRANT, FIRE CONTROL: M17
ARMY MIL-Q-48556 A NOTICE 1-1997 QUADRANT, FIRE CONTROL: M18
ARMY MIL-Q-48556 A-1989 QUADRANT, FIRE CONTROL: M18
ARMY MIL-C-48605 A (1)-1992 CONTROL ASSEMBLY R.F. (UNIT 1): 11748205
ARMY MIL-C-48605 A-1991 CONTROL ASSEMBLY R.F. (UNIT 1): 11748205
ARMY MIL-HDBK-116-1989 ENVIRONMENTAL CONTROL OF SMALL SHELTERS
ARMY MIL-PRF-49167 B-1997 AUXILIARY CONTROL, VIDEO PL-1402/UA

GM Holden Ltd, Controlled English

HOLDEN HN 2166-2008 TAPE - NOISE CONTROL

Taiwan Provincial Standard of the People's Republic of China, Controlled English

CNS 7623-1994 Button Control Switches
CNS 12726-1998 Control Cables with Shields
CNS 13607-1995 Documentation-Bibliographic Control Characters
CNS 12727-1990 Method of Test for Control Cables with Shields
CNS 7624-1981 Method of Test for Button Control Switches

Professional Standard - Railway, Controlled English

TB/T 1623-1985 TD3 type unit console
TB/T 1622-1985 TD1 type unit console
TB/T 2473-1993 DK·K3 crossing control panel
TB/T 2022-1988 TS4 type electric lock interlock console

Danish Standards Foundation, Controlled English

DS/IEC 122-2:1985 Quartz crystal units for frequency control and selection. Part 2: Guide to the use of quartz crystal units for frequency control and selection
DS/EN 169200:1998 Sectional Specification: Quartz crystal controlled oscillators (Qualification approval)
DS/ISO/IEC 10538:1998 Information technology - Control functions for text communication

Standard Association of Australia （SAA）, Controlled English

AS 2842:1986 Fluid power - O-rings and housings - Inch series, metric conversion
AS 2842:1986/Amdt 1:1986
AS 2842:1986/Amdt 2:1988

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Controlled English

GJB 5439-2005 Requirements for preparing avionics interface control documents

American Water Works Association (AWWA), Controlled English

AWWA C508-2001 Swing-Check Valves for Waterworks Service, 2-in. Through 24-in. (50-mm Through 600-mm) NPS

US-FCR, Controlled English

FCR COE ER 1110-2-1402-1978 HYDROLOGIC INVESTIGATION REQUIREMENTS FOR WATER QUALITY CONTROL
FCR 40 CFR PART 1037-2014 CONTROL OF EMISSIONS FROM NEW HEAVY-DUTY MOTOR VEHICLES
FCR 40 CFR PART 1037-2015 CONTROL OF EMISSIONS FROM NEW HEAVY-DUTY MOTOR VEHICLES
FCR 40 CFR PART 1037-2013 CONTROL OF EMISSIONS FROM NEW HEAVY-DUTY MOTOR VEHICLES

Indonesia Standards, Controlled English

SNI 15-1026-1989 Quarts for fine ceramic manufacture, porcelain type

American Society of Mechanical Engineers (ASME), Controlled English

ASME B18.6.8-2010 Thumb Screws and Wing Screws (Inch Series)
ASME B1.1-1989 Unified inch screw threads (UN and UNR thread form)
ASME B1.1-2003 Unified Inch Screw Threads, UN and UNR Thread Form

American Bearing Manufacturers Association, Controlled English

ABMA 22.2-1988(2010) Spherical Plain Radial Bearings, Joint Type Inch Design
ABMA 22.2-1988 Spherical Plain Radial Bearings, Joint Type Inch Design

ABMA - American Bearing Manufacturers Association, Controlled English

23.2-1988 Thrust Bearings of Tapered Roller Type - Inch Design
22.2-1988 Spherical Plain Radial Bearings@ Joint Type Inch Design

International Organization for Standardization (ISO), Controlled English

ISO/IEC 23005-6:2011 Information technology - Media context and control - Part 6: Common types and tools
ISO/IEC 23005-6:2013 Information technology - Media context and control - Part 6: Common types and tools
ISO/IEC 23005-6:2016 Information technology - Media context and control - Part 6: Common types and tools
ISO 26869:2012 Space systems - Small-auxiliary-spacecraft (SASC)-to-launch-vehicle interface control document
ISO/IEC 23005-6:2019 Information technology — Media context and control — Part 6: Common types and tools
ISO 2628:1973 Basic mode control procedures; Complements
ISO 3161:1977 UNJ threads, with controlled root radius, for aerospace; Inch series
ISO/IEC 10538:1991 Information technology; control functions for text communication

U.S. Air Force, Controlled English

AIR FORCE MIL-A-9457 A (1)-1959 AMPLIFIER, ELECTRONIC CONTROL, BOMBING NAVIGATIONAL COMPUTER, TYPE MD-1
AIR FORCE MIL-A-9457 A-1959 AMPLIFIER, ELECTRONIC CONTROL, BOMBING NAVIGATIONAL COMPUTER, TYPE MD-1
AIR FORCE MIL-C-8052 C NOTICE 2-1996 CONTROL, PRESSURIZATION SET, C-1173/ASQ
AIR FORCE MIL-A-8052 C VALID NOTICE 1-1986 CONTROL, PRESSURIZATION SET, C-1173/ASQ
AIR FORCE MIL-C-8052 C (1)-1984 CONTROL, PRESSURIZATION SET, C-1173/ASQ
AIR FORCE MIL-C-8052 C-1967 CONTROL, PRESSURIZATION SET, C-1173/ASQ

United States Navy, Controlled English

NAVY MIL-C-85373 A NOTICE 1-1996 CONTROL-MONITOR SET, GUIDED WEAPON, AN/AWW-12A
NAVY MIL-C-85373 A-1988 CONTROL-MONITOR SET, GUIDED WEAPON, AN/AWW-12A
NAVY MIL-M-85522 A NOTICE 1-1997 MONITOR, OXYGEN, CRU-91/A
NAVY MIL-M-85522 A-1991 MONITOR, OXYGEN, CRU-91/A
NAVY UFGS-01 45 00.10 20-2010 QUALITY CONTROL FOR MINOR CONSTRUCTION
NAVY UFGS-01 45 02.10-2008 NAVFAC QUALITY CONTROL FOR MINOR CONSTRUCTION
NAVY MIL-C-81925 VALID NOTICE 1-1988 CONTROL, TEST HARNESS, C-9154/APM
NAVY MIL-C-81925-1973 CONTROL, TEST HARNESS, C-9154/APM
NAVY MIL-C-85144 C-1986 CONTROL SECTION, GUIDED MISSILE FOR AIM/RIM-7M, GUIDED MISSILE
NAVY MIL-C-8514-1967 CONTROL SECTION, GUIDED MISSILE FOR AIM/RIM-7M, GUIDED MISSILE

National Electrical Manufacturers Association（NEMA), Controlled English

NEMA DC 5-1989 Residential Controls - Surface-Type Controls for Electric Storage Water Heaters

AT-ON, Controlled English

ONORM EN 2143-1993 Aerospace series — Rivets, solid, universal head, in aluminium 1050A, inch based series
ONORM EN 2148-1993 Aerospace series — Rivets, solid, universal head, in aluminium alloy 5056A, inch based series
ONORM EN 2146-1993 Aerospace series — Rivets, solid, universal head, in aluminium alloy 2017A, inch based series

Professional Standard - Medicine, Controlled English

YY 0646-2008 Small steam sterilizers.automatic type
YY 0731-2009 Large steam sterilizers.Manual control type
YY/T 0646-2015 Small steam sterilizer automatic control type

IETF - Internet Engineering Task Force, Controlled English

RFC 4342-2006 Profile for Datagram Congestion Control Protocol (DCCP) Congestion Control ID 3: TCP-Friendly Rate Control (TFRC)
RFC 4341-2006 Profile for Datagram Congestion Control Protocol (DCCP) Congestion Control ID 2: TCP-like Congestion Control

CU-NC, Controlled English

NC 02-01-10-1987 Unified System for Design Documentation. Standardizing Control
NC 99-46-1987 Computing. Proqram Assurance Documentation System. Standardizing Control

WRC - Welding Research Council, Controlled English

BULLETIN 291-1984 FRACTURE CONTROL OF PRESSURE VESSELS UP TO 2 ? INCHES THICK

International Federation of Trucks and Engines, Controlled English

NAVISTAR ESP-L-8.128-2016 VOID - Straight Thread O-Ring Boss Plugs - English Series - (Noun Code 6400)

Canadian Standards Association (CSA), Controlled English

CSA ISO/IEC-11185-7-CAN/CSA:1995 Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 7: FVT2110 - Entry-Control Control Object R(1999)

US-MSFC, Controlled English

MSFC NASA MPR 1410.1 REV E-2008 DOCUMENTATION AND DATA CONTROL FOR ORGANIZATIONAL ISSUANCES

API - American Petroleum Institute, Controlled English

API PROCEEDINGS-1994 PROCEEDINGS OF THE 1994 API Cybernetics Symposium

Hebei Provincial Standard of the People's Republic of China, Controlled English

DB13/T 2008-2014 Intelligent temperature control device

Professional Standard - Traffic, Controlled English

JT 454-2001 Fiber - optic lane control signs

IN-BIS, Controlled English

ZA-SANS, Controlled English

CKS 368-1973 Lever arch files for stationery

Military Standard of the People's Republic of China-General Armament Department, Controlled English

GJB 8462-2015 Approval test procedure for ground artillery fire control and command control system

CZ-CSN, Controlled English

CSN EN 60534-3-3-1999 Industrial-process control valves - Part 3-3: Dimensions - End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves
CSN 25 3501-1989 Gauge for control of straight face plined joints. Type

GM Daewoo, Controlled English

GMKOREA EDS-T-7724-2011 Resistance to Oxidation of Brake Fluid (Version 4; English/Korean; Do Not Use on New Program; No Replacement)

Aeronautical Radio Inc., Controlled English

ARINC 636 ITEM 5.0 Media Access Control (MAC) Sublayer Profile
ARINC 636 ITEM 6.0 Logical Link Control (LLC) Sublayer Profile

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Controlled English

GB/T 18286-2000 Information technology--Control functions for text communication
GB/T 10405-2001 Type designation for control motor
GB/T 10405-2009 Type designation for electrical machine for automatic control system

European Committee for Standardization (CEN), Controlled English

EN 2143:1992 Aerospace series; rivets, solid, universal head, in aluminium 1050A, inch based series

Professional Standard - Coal, Controlled English

MT 624-2007 Flameproof control push button for coal mine
MT 624-1996 Flameproof control button for coal mine

Defense Logistics Agency, Controlled English

DLA MIL-DTL-7034/3 A (2)-2012 PULLEY, GROOVE, HEAVY DUTY, CONTROL, AIRCRAFT

国家安全生产监督管理总局, Controlled English

MT/T 624-2007 Explosionproof control button for coal mines

Institute of Electrical and Electronics Engineers (IEEE), Controlled English

SMPTE RP 85:1999 RP 85:1999 - SMPTE Recommended Practice - Tracking-Control Record for 1-in Type C Helical-Scan Television Tape Recording