ZH
RU
ES

How to use the micro sampler

How to use the micro sampler, Total:500 items.

In the international standard classification, How to use the micro sampler involves: Microbiology, Wastes, Products of the chemical industry, Rubber, Air quality, Animal feeding stuffs, Raw materials for rubber and plastics, Water quality, Radiation measurements, Materials for the reinforcement of composites, Aircraft and space vehicles in general, Soil quality. Pedology, Glass, Metalliferous minerals, Materials and articles in contact with foodstuffs, Fuels, Inorganic chemicals, Analytical chemistry, Waxes, bituminous materials and other petroleum products, Milk and milk products, Ferroalloys, Environmental protection, Non-ferrous metals, Mechanical testing, Products of the textile industry, Plastics, Document imaging applications, Organic chemicals, Road engineering, Magnetic materials, Welding, brazing and soldering, Aerospace fluid systems and components, Sterilization and disinfection, Installations in buildings, Surface treatment and coating, Radiocommunications, Construction materials, Equipment for the chemical industry, Insulating materials, Biology. Botany. Zoology, Quality, Measurement of volume, mass, density, viscosity, Lubricants, industrial oils and related products, Kitchen equipment, Medical equipment, Corrosion of metals, Construction industry, Pharmaceutics, Materials for aerospace construction, Aids for disabled or handicapped persons, Protection against dangerous goods, Electromagnetic compatibility (EMC), Protection against fire, AGRICULTURE, Vibrations, shock and vibration measurements, Linear and angular measurements, Thermodynamics and temperature measurements, Protection of and in buildings, Components for aerospace construction, Electricity. Magnetism. Electrical and magnetic measurements, Electronic display devices, Optoelectronics. Laser equipment, Electronic component assemblies, Textile fibres, Vocabularies.


Japanese Industrial Standards Committee (JISC), How to use the micro sampler

  • JIS K 3836:1995 Testing methods for collection efficiency of airborne microbe samplers
  • JIS A 1232:2023 Method for obtaining soil samples using the fixed piston sampler
  • JIS K 3836 AMD 1:2006 Testing methods for collection efficiency of airborne microbe samplers (Amendment 1)
  • JIS Z 8810:1979 Electrostatic dust sampler and measuring method for mass of airborne dust by the electrostatic dust sampler
  • JIS M 8082:1999 Copper scraps for smelting -- Methods for sampling, sample preparation and determination of moisture content
  • JIS Z 7152:2013 Determination of PM10/PM2.5 mass concentration in flue gas by use of virtual impactors
  • JIS B 7993:2008 Automated measuring systems for flue gas using non-exractive methods
  • JIS M 8082 AMD 1:2015 Copper scraps for smelting -- Methods for sampling, sample preparation and determination of moisture content (Amendment 1)
  • JIS Z 8910:2007 Test method of filter media for dust collection -- Sampling and test method for fabric filter durability
  • JIS C 2565:1992 Measuring methods for ferrite cores for microwave device
  • JIS S 2075:2011 Measurement method of efficiency for domestic gas and oil water heater under standard usage mode
  • JIS Z 4504-2:2023 Measurement of radioactivity -- Measurement and evaluation of surface contamination -- Part 2: Test method using wipe-test samples

British Standards Institution (BSI), How to use the micro sampler

  • BS ISO 20045:2023 Measurement of the radioactivity in the environment. Air: tritium. Test method using bubbler sampling
  • BS 6043-4.1:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Cold ramming pastes. Methods of sampling
  • BS 5293-1:1990 Sampling and testing carbon black for use in the rubber industry. Methods of sampling
  • BS 6043-3.1.2:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of anodes
  • BS 6043-3.1.1:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of cathodes
  • 22/30404742 DC BS ISO 20045. Measurement of the radioactivity in the environment. Air: tritium. Test Method using bubbler sampling
  • PD CEN ISO/TS 29843-2:2021 Soil quality. Determination of soil microbial diversity. Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method
  • BS 6043-2.1:1985 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling
  • BS PD CEN ISO/TS 29843-2:2021 Soil quality. Determination of soil microbial diversity. Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method
  • BS ISO 18593:2004 Microbiology of food and animal feeding stuffs - Horizontal methods for sampling techniques from surfaces using contact plates and swabs
  • BS 6043-2.8:1987 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of oil content by solvent extraction of calcined coke
  • BS ISO 20044:2022 Measurement of radioactivity in the environment. Air: aerosols. Test method using sampling by filter media
  • BS 5293-3:1996 Sampling and testing carbon black for use in the rubber industry. Method for determination of fines content
  • BS 5293-8:1996 Sampling and testing carbon black for use in the rubber industry. Method for determination of dust content
  • BS 6043-1.1:2002 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Sampling. Section 1.1: Sampling
  • BS 6043-1.9:1989 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulphur content (bomb method)
  • BS 6043-1.13:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of sulfur content
  • BS 6043-2.3:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of trace elements in green and calcined coke by flame atomic absorption spectroscopy
  • BS ISO 25597:2013 Stationary source emissions. Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
  • BS 6043-2.7:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the apparent oil content of calcined cokes (gravimetric method)
  • BS EN 17547:2021 Animal feeding stuffs: Methods of sampling and analysis. Determination of vitamin A, E and D content. Method using solid phase extraction (SPE) clean-up and highperformance liquid chromatography (HPLC)
  • 20/30396933 DC BS EN 17547. Animal feeding stuffs: Methods of sampling and analysis. Determination of vitamin A, E and D content. Method using solid phase extraction clean-up and High Performance Liquid Chromatography
  • BS 6043-2.11:1995 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of volatile matter content
  • BS ISO 20720:2018 Microbeam analysis. Methods of specimen preparation for analysis of general powders using WDS and EDS
  • BS 6043-1.2:1981 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of water content (Dean and Stark method)
  • 22/30458340 DC BS EN 17908. Algae and algae products. Methods of sampling and analysis. Determination of total lipids content using the Ryckebosch-Foubert method
  • BS 6075-3:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of iron content
  • BS 6043-2.16:1998 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of water content of calcined coke
  • BS ISO 14648-2:2001 Micrographics. Quality control of COM recorders that generate images using a single internal display system - Method of use
  • BS EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis. Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
  • BS 6070-5:1981 Methods of sampling and test for sodium carbonate for industrial use. Determination of sulphate content
  • BS 6075-9:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of calcium and magnesium contents
  • BS 6043-1.4:1981 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of toluene-insoluble material
  • BS 6043-1.5:1983 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of content of quinoline-insoluble material
  • BS 6043-2-18:2001 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of total sulfur by the Eschka method
  • BS 598-112:2004 Sampling and examination of bituminous mixtures for roads and other paved areas - Method for the use of road surface hardness probe
  • BS EN ISO 17655:2003 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement
  • BS 6075-2:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of chloride content (mercurimetric method)
  • BS 6075-6:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of carbonate content
  • BS 6075-8:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of sulphate content
  • 21/30404333 DC BS ISO 20044-1. Measurement of radioactivity in the environment. Air: aerosols. Test method using sampling by filter media. Part 1. Aerosols sampling
  • BS 5293-20:1992 Sampling and testing carbon black for use in the rubber industry. Method for evaluation in styrene-butadiene rubbers
  • BS 5293-2:1996 Sampling and testing carbon black for use in the rubber industry. Method for determination of pour density
  • BS 6043-1.8:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of ash
  • BS 6092-9:1981 Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of iron content
  • BS 6070-1:1981 Methods of sampling and test for sodium carbonate for industrial use. Determination of total soluble alkali content
  • BS 6075-1:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of sodium hydroxide content
  • BS 6075-4:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of silica content
  • BS 6092-3:1981 Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of silica content (gravimetric method)
  • BS 6043-1.10:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of volatile matter content. Section 1.10 Determination of volatile matter content
  • BS 6092-5:1981 Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of total alkali content
  • BS EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
  • BS EN 17346:2020 Ambient air. Standard method for the determination of the concentration of ammonia using diffusive samplers
  • BS 6075-11:1981 Methods of sampling and test for sodium hydroxide for industrial use. Determination of mercury content (flameless atomic absorption method)
  • BS ISO 14648-2:2002 Micrographics - Quality control of COM recorders that generate images using a single internal display system - Method of use
  • BS 6092-4:1981 Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of carbonate content
  • BS EN 60835-3-4:1993 Methods of measurement for equipment used in digital microwave radio transmission systems - Measurements on satellite earth stations - Low noise amplifier
  • BS EN 60835-3-5:1995 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations. Up- and down-converters
  • BS 6043-2.15:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of grain stability of calcined coke using a laboratory vibration mill
  • BS EN 60835-3-6:1997 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations. High-power amplifiers
  • BS EN 60835-3-4:1997 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations. Low noise amplifier
  • BS EN 12305:1998 Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified plants
  • BS 6002-2:2007 Sampling procedures for inspection by variables - General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
  • BS ISO 11023:1999 Liquorice extracts (Glycyrrhiza glabra L.). Determination of glycyrrhizic acid content. Methods using high-performance liquid chromatography
  • BS 6696:1986 Methods for use and testing of capacity of volumetric glassware
  • BS 6043-2.4:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Analysis by X-ray fluorescence spectroscopy
  • BS 6043-3.8.1:2001 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Carboxy reactivity of prebaked anodes. Determination of the reactivity by a loss in mass method
  • BS 7334-1:1990 Measuring instruments for building construction. Methods for determining accuracy in use: theory
  • BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
  • BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
  • BS 6043-3.2:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of density of cathode blocks and prebaked anodes
  • BS ISO 11938:2012 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
  • PD 0028:2002 Quantitative software management. Software measurement methods. A guide to the use of ISO/IEC and other standards for obtaining and using software measurements for product and process improvement
  • BS 6043-3.9.1:2002 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Chemical reactivity to air of prebaked anodes. Determination of the reactivity by a loss in mass method
  • BS 6043-2.6:1986 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the density in xylene of calcined cokes
  • BS 6043-2.13:1996 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of tapped bulk density of green and calcined coke
  • BS 6043-1.6:1998 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. Determination of coking value. Section 1.6 Determination of coking value
  • BS EN 60835-2-8:1996 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systems. Adaptive equalizer
  • BS EN 60835-3-2:1996 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations. Antenna
  • BS EN 60835-3-1:1994 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on satellite earth stations. General
  • BS EN ISO 23908:2013 Sharps injury protection. Requirements and test methods Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
  • BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
  • BS ISO 25101:2009 Water quality - Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) - Method for unfiltered samples using solid phase extraction and liquid chromatography/mass spectrometry
  • BS EN 1014-4:2010 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Determination of the water-extractable phenols content of creosote
  • BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
  • BS EN 60835-2-11:1997 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systems. Cross-polarization interference canceller
  • BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
  • BS EN ISO 23908:2011 Sharps injury protection. Requirements and test methods. Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
  • BS IEC 62629-12-1:2014 3D Display devices. Measuring methods for stereoscopic displays using glasses. Optical
  • BS 3338-17:1965 Methods for the sampling and analysis of tin and tin alloys - Method for the determination of cadmium in solders and white metal bearing alloys (photometric method)
  • BS EN 60835-2-4:1997 Methods of measurement for equipment used in digital microwave radio transmission systems. Measurements on terrestrial radio-relay systems. Transmitter/receiver including modulator/demodulator
  • BS EN ISO 18857-1:2006 Water quality - Determination of selected alkylphenols - Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
  • BS EN ISO 15216-1:2017+A1:2021 Microbiology of the food chain. Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR - Method for quantification

American Society for Testing and Materials (ASTM), How to use the micro sampler

  • ASTM D6699-01 Standard Practice for Sampling Liquids Using Bailers
  • ASTM D6966-18 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
  • ASTM C1606-10(2023) Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
  • ASTM F1308-98 Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
  • ASTM F1308-98(2003) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
  • ASTM D2276-06 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
  • ASTM D5074-90(2003) Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
  • ASTM F1308-98(2023) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
  • ASTM E1728/E1728M-20 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
  • ASTM C1606-10(2018) Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
  • ASTM F1308-98(2008) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
  • ASTM D5756-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
  • ASTM D5756-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
  • ASTM D6831-05a Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D6831-05 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D2276-05 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
  • ASTM D2276-22 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
  • ASTM D2276-06(2014) Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling
  • ASTM A610-79(2004) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
  • ASTM A610-79(2009) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
  • ASTM D6966-13 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
  • ASTM E1615-05 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
  • ASTM E1615-04 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
  • ASTM E1615-00 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
  • ASTM E1615-08 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method
  • ASTM D1708-10 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
  • ASTM F1308-98(2014) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
  • ASTM D1708-13 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
  • ASTM D3266-91(2011) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
  • ASTM C1606-04 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
  • ASTM C1606-10(2014) Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
  • ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
  • ASTM D5142-02a Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
  • ASTM D5142-02ae1 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
  • ASTM D5142-02 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
  • ASTM E2314-03(2008) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
  • ASTM D5142-04 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
  • ASTM D5142-09 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
  • ASTM D5755-03 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
  • ASTM D5755-09 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
  • ASTM D5755-09(2014)e1 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading
  • ASTM F3321-19 Standard Guide for Methods of Extraction of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices
  • ASTM D5258-02(2013) Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
  • ASTM D5954-22a Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy
  • ASTM D5755-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Concentrations
  • ASTM D5755-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Concentrations
  • ASTM D5756-02(2008) Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Surface Loading
  • ASTM F1308-98(2018) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
  • ASTM D5875-95(2006) Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
  • ASTM D1005-95(2001) Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
  • ASTM D5074-90(2008) Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures
  • ASTM D5954-98(2006) Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
  • ASTM D5954-98 Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy
  • ASTM D7650-13 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
  • ASTM D6800-02(2007)e1 Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
  • ASTM D6800-02 Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals
  • ASTM C311-05 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM C311-11 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM D6928-08 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
  • ASTM E2314-03(2014) Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
  • ASTM D7773-19 Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3) Using Filter Sampling and Suppressed Ion Chromatography
  • ASTM D7899-19 Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method
  • ASTM D789-15 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)
  • ASTM C311-04 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
  • ASTM F1519-98 Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
  • ASTM F1519-98(2003) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
  • ASTM F1519-98(2008) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
  • ASTM C1926-23 Standard Test Method for Measurement of Glass Dissolution Rate Using Stirred Dilute Reactor Conditions on Monolithic Samples
  • ASTM G76-02 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
  • ASTM D5175-91(2003) Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
  • ASTM D7428-08e1 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
  • ASTM E1358-97(2013) Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven
  • ASTM D4532-10 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
  • ASTM D5875-95(2000) Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
  • ASTM D5875/D5875M-18 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water Quality Monitoring Devices
  • ASTM D5175-91(2011) Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography
  • ASTM D7650-10 Standard Test Method for Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
  • ASTM D5791-23 Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings
  • ASTM E2927-16 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
  • ASTM E2927-16e1 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
  • ASTM F1519-98(2019) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
  • ASTM F1094-87(2005) Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method
  • ASTM D6480-19 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Surface Loading by Transmission Electron Microscopy
  • ASTM D4864-14 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography
  • ASTM D5142-90(1998) Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
  • ASTM E1618-10 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
  • ASTM F1519-98(2014) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
  • ASTM D8166-21a Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Condition Monitors
  • ASTM D8166-21 Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
  • ASTM D8166-22 Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors
  • ASTM D8166-17 Standard Test Method for Sizing and Counting Particulates in Light and Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Counters
  • ASTM D5765-95(2001) Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating
  • ASTM D6480-05 Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy
  • ASTM D6480-05(2010) Standard Test Method for Wipe Sampling of Surfaces, Indirect Preparation, and Analysis for Asbestos Structure Number Concentration by Transmission Electron Microscopy
  • ASTM D4532-22 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
  • ASTM E2314-03 Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)
  • ASTM E511-07(2020) Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
  • ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
  • ASTM E3331-22 Standard Test Method for Measuring Target Modulus Using the Light Weight Deflectometer on Laboratory Compaction Characteristic Samples
  • ASTM F331-13(2020) Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
  • ASTM A927/A927M-11 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
  • ASTM D3012-13 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
  • ASTM E2330-12 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
  • ASTM D5316-98 Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
  • ASTM D5316-98(2004) Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
  • ASTM D5316-98(2011) Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography
  • ASTM D7309-21a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
  • ASTM D7309-21 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
  • ASTM D7309-20 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
  • ASTM D7309-19 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
  • ASTM D7309-19a Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
  • ASTM D6866-12 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
  • ASTM F1500-98(2019) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants

Association Francaise de Normalisation, How to use the micro sampler

  • NF EN ISO 18593:2018 Microbiologie des aliments - Méthodes horizontales pour les techniques de prélèvement sur des surfaces, au moyen de boîtes de contact et d'écouvillons
  • NF X43-052*NF ISO 25597:2014 Stationary source emissions - Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
  • NF T90-353:1995 Water quality. Sampling in deep waters for macro-invertebrates. Guidance on the use of colonization, qualitative and quantitative samplers.
  • NF V08-035*NF EN ISO 18593:2018 Microbiology of the food chain - Horizontal methods for sampling techniques from surfaces using contact plates and swabs
  • XP CEN ISO/TS 29843-2:2021 Qualité du sol - Détermination de la diversité microbienne du sol - Partie 2 : méthode par analyse des acides gras phospholipidiques (PLFA) en utilisant la méthode simple d'extraction des PLFA
  • NF EN 60705/A2:2018 Fours à micro-ondes à usage domestique - Méthodes de mesure de l'aptitude à la fonction
  • NF EN 60705:2015 Fours à micro-ondes à usage domestique - Méthodes de mesure de l'aptitude à la fonction
  • NF T20-241:1982 Liquid chlorine for industrial use. Method of sampling (for determining only the volumetric chlorine content).
  • NF EN ISO 11461:2014 Qualité du sol - Détermination de la teneur en eau du sol en fraction volumique, à l'aide de carottiers - Méthode gravimétrique
  • NF ISO 20044:2023 Mesurage de la radioactivité dans l'environnement - Air : particules d'aérosol - Méthode d'essai utilisant l'échantillonnage par un média filtrant
  • NF V18-806*NF EN 17547:2021 Animal feeding stuffs - Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC)
  • NF ISO 8761:1990 Air des lieux de travail - Détermination de la concentration en masse du dioxyde d'azote - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
  • NF ISO 8760:1990 Air des lieux de travail - Détermination de la concentration en masse du monoxyde de carbone - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
  • NF V08-403:1997 Microbiology of food and animal feeding stuffs. Method for aseptic sampling in view of the microbiological analysis of preserved and assimilated products.
  • NF V18-247*NF EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
  • NF X43-029-3*NF EN 14662-3:2015 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography
  • NF A89-575:2003 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement.
  • NF X41-569:2014 Wood preservatives - Laboratory method for obtaining samples for analysis to measure losses by leaching into water or synthetic sea water
  • NF X43-060-3*NF EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3 : guide to selection, use and maintenance.
  • NF X43-278*NF EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
  • NF X43-254*NF ISO 8760:1990 Work-place air. Determination of mass concentration of carbon monoxide. Method using detector tubes for short-term sampling with direct indication.
  • NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
  • NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
  • NF EN 17053:2018 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Dosage par ICP-MS (multiméthode) des éléments traces, métaux lourds et autres éléments inorganiques présents dans les aliments
  • NF T90-205*NF EN ISO 27108:2013 Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
  • NF EN IEC 61726:2022 Cordons, câbles, connecteurs et composants hyperfréquence passifs - Mesurage de l'affaiblissement d'écran par la méthode de la chambre réverbérante
  • NF X43-015:1976 Air pollution. Nitrogen dioxide content of atmospheric air. Method of determination by collection on a triethanolamine-impregnated filter.
  • NF ISO 25597:2014 Émissions de sources fixes - Méthode d'essai pour la détermination de la concentration en masse de PM 2,5 et PM 10 dans les gaz émis à la cheminée en utilisant des échantillonneurs cyclone et une dilution d'échantillon
  • NF V08-035:2004 Microbiology of food and animal feeding stuffs - Horizontal methods for sampling techniques from surfaces using contact plates and swabs.
  • NF X43-029-3:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography.
  • FD CEN/TR 17421:2020 Aliments pour animaux - Méthodes d'échantillonnage et d'analyse - Recommandations pour l'organisation et l'évaluation des études comparatives interlaboratoires utilisant des méthodes d'analyses multianalytes
  • NF X43-286:2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods.
  • NF X43-710:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Part 1 : measurement at low concentrations by use of impactors.
  • NF X43-029-1*NF EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : pumped sampling followed by thermal desorption and gas chromatography
  • NF X43-255*NF ISO 8761:1990 Work-place air. Determination of mass concentration nitrogen dioxide. Method using detector tubes for short-term sampling with direct indication.
  • NF EN ISO 4787:2021 Verrerie et matériel en plastique de laboratoire - Instruments volumétriques - Méthodes d'essai de la capacité et d'utilisation
  • NF X43-029-4*NF EN 14662-4:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 4 : diffusive sampling followed by thermal desorption and gas chromatography
  • NF ISO 20045:2023 Mesurage de la radioactivité dans l'environnement - Air : tritium - Méthode d'essai à l'aide d'un prélèvement par barbotage
  • NF T35-507-1:1997 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 1 : sampling.
  • NF C90-303-4*NF EN 60835-3-4:1996 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 3 : measurements on satellite earth stations. Section 4 : low noise amplifier.
  • NF C90-303-5*NF EN 60835-3-5:1994 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 3 : measurements on satellite earth stations. Section 5 : up-and down-converters.
  • NF V18-249*NF EN 17362:2020 Animal feeding stuffs : methods of sampling and analysis - Determination of pentachlorophenol (PCP) in feed materials and compound feed by LC-MS/MS
  • NF C90-303-10*NF EN 60835-3-10:1995 Methods of measurement for equipment used in digital microwave radio transmission systems. Part 3 : measurements on satellite earth stations. Section 10 : terminal equipment tdma traffic earth station.
  • NF T90-943*NF EN ISO 17943:2016 Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS)
  • NF M60-702*NF ISO 7503-2:2017 Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 2 : test method using wipe-test samples
  • NF ISO 7503-2:2017 Mesurage de la radioactivité - Mesurage et évaluation de la contamination de surface - Partie 2 : méthode d'essai utilisant des échantillons d'essai de frottis
  • NF B35-309:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use.
  • NF T90-693*NF EN 16693:2015 Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - mETHOD using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • NF S93-090*NF EN ISO 23908:2013 Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
  • NF T90-691*NF EN 16691:2015 Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • NF EN 16694:2015 Qualité de l'eau - Dosage du pentabromodiphényléther (PBDE) dans des échantillons d'eau totale - Méthode par extraction en phase solide (SPE) avec disques SPE, avec couplage chromatographie en phase gazeuse-spectrométrie de masse (CG-SM)
  • NF X43-016:1977 Method for the determination of an acid gas pollution index(expressed as SO2 equivalent)using a continuous sampling automatic sequential analyser.
  • NF T90-694*NF EN 16694:2015 Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography - mass spectrometry (GC-MS)

CH-SNV, How to use the micro sampler

  • SN EN 17346-2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

PL-PKN, How to use the micro sampler

  • PN-EN 17346-2020-11 E Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers
  • PN-EN ISO 22065-2021-05 E Workplace air -- Gases and vapours -- Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
  • PN B13018-1992 Laboratory glassware. Volumetric glassware. Methods for use and testing of capacity
  • PN Z04225-03-1993 Air purity protection. Tests for hydrogen chloride content. Determination of hydrogen chloride by turbidimetry in workplaces with sampling using gas washing bottles

German Institute for Standardization, How to use the micro sampler

  • DIN EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
  • DIN EN 17547:2022 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC)
  • DIN EN 17547:2022-01 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC); German version EN 17547:2021
  • DIN EN 17547:2020 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction clean-up and High Performance Liquid Chromatography; German and English version prEN 17547:2020
  • DIN EN 17053:2018-03 Animal feeding stuffs - Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method); German version EN 17053:2018
  • DIN EN 17053:2018 Animal feeding stuffs - Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
  • DIN CEN ISO/TS 29843-2:2014-12*DIN SPEC 91201-2:2014-12 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS 29843-2:2011); German version CEN ISO/TS 29843-2:2014
  • DIN EN 17908:2022-10 Algae and algae-based products or intermediates - Methods of sampling and analysis - Determination of total lipids using the Ryckebosch-Foubert method; German and English version prEN 17908:2022 / Note: Date of issue 2022-09-02
  • DIN ISO 5884:1989 Aerospace; fluid systems and components; methods for system sampling and measuring the solid particle contamination of hydraulic fluids; identical with ISO 5884:1987
  • DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
  • DIN CEN/TS 16916:2016-08*DIN SPEC 2212:2016-08 Materials obtained from End of Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method; German version CEN/TS 16916:2016
  • DIN EN 16916:2023-07 Materials obtained from End of Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method; German and English version prEN 16916:2023 / Note: Date of issue 2023-06-16*Intended as rep...
  • DIN ISO 18593:2009 Microbiology of food and animal feeding stuffs - Horizontal methods for sampling techniques from surfaces using contact plates and swabs (ISO 18593:2004)
  • DIN EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2005
  • DIN EN ISO 18857-1:2007-02 Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005); German version EN ISO 18857-1:2006
  • DIN EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods; German version EN 838:2010
  • DIN 10113-2:2023-02 Horizontal method for the determination of surface colony count and detection of specific microorganisms on fitment and utensils along the food chain - Part 2: Method with culture media laminated taking up equipment (squeeze method)
  • DIN 19739-1:2002 Air and soil quality - Measurement of atmospheric deposition of organic trace substances; Funnel adsorber method - Part 1: Sampling devices; Requirements, installation, application
  • DIN EN ISO 11125-1:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993); German version EN ISO 11125-1:1997
  • DIN EN 17362:2020 Animal feeding stuffs: Methods of sampling and analysis - Determination of pentachlorophenol (PCP) in feed materials and compound feed by LC-MS/MS
  • DIN EN 16693:2015 Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS)
  • DIN CEN/TS 16692:2015-08*DIN SPEC 38407-49:2015-08 Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry; German version CEN/TS 16692:2015
  • DIN ISO/TS 29843-2:2013 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS 29843-2:2011)
  • DIN EN 16691:2015 Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS)
  • DIN EN 16693:2015-12 Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS); German version EN 16693:2015
  • DIN EN 16694:2015 Water quality - Determination of selected polybrominated diphenly ether (PBDE) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS)
  • DIN IEC 61336:1999 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
  • DIN EN 60835-3-6:1997-03 Methods of measurement for equipment used in digital microwave transmission systems - Part 3: Measurements on satellite earth stations; section 6: High-power amplifiers (IEC 60835-3-6:1996); German version EN 60835-3-6:1996
  • DIN EN ISO 17943:2016-10 Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 17943:2016); German version EN ISO 17943:2016
  • DIN EN ISO 27108:2013-12 Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 27108:2010); German version EN ISO 27108:2013

European Committee for Standardization (CEN), How to use the micro sampler

  • EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements@ heavy metals and other elements in feed by ICP-MS (multi-method)
  • FprEN 17547-2021 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction clean-up and High Performance Liquid Chromatography
  • EN 17050:2017 Animal feeding stuffs: Methods of sampling and analysis - Determination of iodine in animal feed by ICP-MS
  • EN ISO 22065:2020 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using pumped samplers (ISO 22065:2020)
  • EN ISO 23320:2022 Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022)
  • EN ISO/TS 29843-2:2014 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method
  • EN ISO/TS 29843-2:2021 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method
  • CEN ISO/TS 29843-2:2021 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS 29843-2:2021)
  • EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
  • EN ISO 9391:1995 Water Quality - Sampling in Deep Waters for Macro-Invertebrates - Guidance on the Use of Colonization, Qualitative and Quantitative Samplers; (ISO 9391 : 1993)
  • CEN ISO/TS 29843-2:2014 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS 29843-2:2011, Corrected Version 2012-02-01)
  • EN ISO 17655:2003 Destructive tests on welds in metallic materials Method for taking samples for delta ferrite measurement ISO 17655:2003
  • CEN/TS 16916:2016 Materials obtained from End of Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method
  • EN 28265:1994 Water Quality Design and Use of Quantitative Samplers for Benthic Macro-Invertebrates on Stony Substrata in Shallow Freshwaters (ISO 8265 : 1988)
  • EN ISO 18857-1:2006 Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005)
  • prEN 838-1992 Workplace atmospheres; diffusive samplers for the determination of gases and vapours; requirements and test methods
  • EN 2003-010:2007 Aerospace series - Titanium and titanium alloys - Test methods - Part 010: Sampling for determination of hydrogen content
  • EN ISO 23861:2022 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
  • EN ISO 4787:2021 Laboratory glass and plastic ware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2021)
  • EN ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
  • EN ISO 4787:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15)
  • EN 13528-2:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 2: Specific requirements and test methods
  • EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography

American National Standards Institute （ANSI), How to use the micro sampler

International Organization for Standardization (ISO), How to use the micro sampler

  • ISO 4822:1981 Single use blood specimen containers up to 25 ml capacity
  • ISO 9391:1993 Water quality — Sampling in deep waters for macro-invertebrates — Guidance on the use of colonization, qualitative and quantitative samplers
  • ISO/FDIS 20045 Measurement of the radioactivity in the environment – Air: tritium – Test Method using bubbler sampling
  • ISO 20045 Measurement of the radioactivity in the environment – Air: tritium – Test Method using bubbler sampling
  • ISO 20045:2023 Measurement of the radioactivity in the environment — Air: tritium — Test method using bubbler sampling
  • ISO 1886:1980 Textile glass — Method of sampling applicable to batches
  • ISO 3085:2019 Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
  • ISO 20720:2018 Microbeam analysis - Methods of specimen preparation for analysis of general powders using WDS and EDS
  • ISO 22065:2019 Workplace air — Gases and vapours — Requirements for evaluation of measuring procedures using pumped samplers
  • ISO 23320:2022 Workplace air — Gases and vapours — Requirements for evaluation of measuring procedures using diffusive samplers
  • ISO 17655:2003 Destructive tests on welds in metallic materials - Method for taking samples for delta ferrite measurement
  • ISO/TS 29843-2:2021 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method
  • ISO/TS 29843-2:2011 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method
  • ISO 8265:1988 Water quality; design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters
  • ISO 8760:1990 Work-place air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication
  • ISO 18593:2004 Microbiology of food and animal feeding stuffs - Horizontal methods for sampling techniques from surfaces using contact plates and swabs
  • ISO 20044:2022 Measurement of radioactivity in the environment — Air: aerosol particles — Test method using sampling by filter media
  • ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
  • ISO 23861:2022 Workplace air — Chemical agent present as a mixture of airborne particles and vapour — Requirements for evaluation of measuring procedures using samplers
  • ISO 4787:2010 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use
  • ISO 23908:2011 Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling
  • ISO 14648-2:2001 Micrographics - Quality control of COM recorders that generate images using a single internal display system - Part 2: Method of use
  • ISO 14648-2:2001/Cor 1:2009 Micrographics - Quality control of COM recorders that generate images using a single internal display system - Part 2: Method of use; Technical Corrigendum 1

Professional Standard - Petroleum, How to use the micro sampler

  • SY/T 6437-2000 Sampling method and quality requirment of core sample for core analysis

Standard Association of Australia （SAA）, How to use the micro sampler

  • AS/NZS 3580.9.13:2013
  • AS 3580.9.8:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
  • AS/NZS 3580.9.14:2013
  • AS/NZS 3580.9.9:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) low volume sampler - Gravimetric method
  • AS/NZS 3580.9.10:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM (sub)2.5(/sub) low volume sampler - Gravimetric method
  • AS/NZS 3580.9.13:2022 Methods for sampling and analysis of ambient air, Method 9.13: Determination of suspended particulate matter — PM2.5 continuous direct mass method using a tapered element oscillating microbalance monitor
  • AS/NZS 3580.15:2014
  • AS 3580.9.8:2001 Methods for sampling and analysis of ambient air Method 9.8: Determination of suspended particulate matter--PM continuous direct mass method using a tapered element oscillating microbalance analyser
  • AS/NZS 2891.14.3:1999 Methods of sampling and testing asphalt - Field density tests - Calibration of nuclear thin-layer density gauge using standard blocks
  • AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
  • AS/NZS 2895.1:1995 Performance of household electrical appliances - Microwave ovens Part 1: Methods for measuring the performance of microwave ovens for household and similar purposes
  • AS/NZS 2891.14.2:2013

BE-NBN, How to use the micro sampler

  • NBN L 02-001-1972 Colorimetric vocabulary — Standards, methods and measuring apparatures
  • NBN T 03-251-1980 Liquid chlorine for industrial use - Method of sampling (for deter-mining only the volumetric chlorine content)

Society of Automotive Engineers (SAE), How to use the micro sampler

  • SAE ARP9013/4-2005 Statistical Product Acceptance Requirements Using Continuous Sampline, Skip-Lot Sampling, or Methods for Special Cases
  • SAE ARP9013/2-2005 Statistical Product Acceptance Requirements Using Attribute or Variable Lot Acceptance Sampling Plans
  • SAE ARP5376B-2010 Methods, Locations and Criteria for System Sampling and Measuring the Solid Particle Contamination of Hydraulic Fluids

JSAE - Society of Automotive Engineers of Japan@ Inc., How to use the micro sampler

  • JASO E004-1992 Sampling Method of Automobile Exhaust Gas Using a Constant Volume Sampler (CVS)

Danish Standards Foundation, How to use the micro sampler

  • DS/ISO/TS 29843-2:2011 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method
  • DS/ISO 18593:2004 Microbiology of food and animal feeding stuffs - Horizontal method for sampling techniques from surfaces using contact plates and swabs
  • DS/ISO/TS 29843-2:2021 Soil quality – Determination of soil microbial diversity – Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method
  • DS/CEN ISO/TS 29843-2:2021 Soil quality – Determination of soil microbial diversity – Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS 29843-2:2021)
  • DS/EN 1076:2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
  • DS/EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
  • DS/EN ISO 18857-1:2006 Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
  • DS/ISO 20179:2007 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
  • DS/EN 60835-3-5:1995 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 5: Up and down convertors
  • DS/EN 60835-3-6:1997 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High power amplifiers
  • DS/EN ISO 27108:2013 Water quality - Determination of selected plant treatment agents and biocide products - Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)

IT-UNI, How to use the micro sampler

  • UNI CEN ISO/TS 29843-2:2021 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method

ZA-SANS, How to use the micro sampler

  • SANS 18593:2004 Microbiology of food and animal feeding stuffs - Horizontal methods for sampling techniques from surfaces using contact plates and swabs
  • SANS 219:2005 Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz
  • SANS 4787:1984 Laboratory glassware - Volumetric glassware - Methods for use and testing of capacity

AENOR, How to use the micro sampler

  • UNE-ISO 18593:2013 Microbiology of food and animal feeding stuffs -- Horizontal methods for sampling techniques from surfaces using contact plates and swabs
  • UNE-EN 838:2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
  • UNE-EN 1076:2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
  • UNE 40210:1973 SAMPLING METHOD FOR A GREAT QUANTITY OF WOOL IN WOOLING WASTE TO DETERMINE THE DIAMETER OF FIBRES AND OR ITS LENGTH.
  • UNE-EN ISO 18857-1:2007 Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005)
  • UNE-EN 60835-3-6:1997 METHODS OF MEASURMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 3: MEASUREMENTS ON SATELLITE EARTH STATIONS. SECTION 6: HIGH POWER AMPLIFIERS.
  • UNE-EN 60835-3-5:1996 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 3: MEASUREMENTS ON SATELLITE EARTH STATION. SECTION 5: UP-DOWN-CONVERTERS.

IN-BIS, How to use the micro sampler

ES-UNE, How to use the micro sampler

  • UNE-EN 17547:2022 Animal feeding stuffs: Methods of sampling and analysis - Determination of vitamin A, E and D content - Method using solid phase extraction (SPE) clean-up and high-performance liquid chromatography (HPLC)
  • UNE-EN 14662-3:2016 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
  • UNE-EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
  • UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
  • UNE-EN 16693:2016 Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
  • UNE-EN 60835-3-4:1994 METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS. PART 3: MEASUREMENTS ON SATELLITE EARTH STATIONS. SECTION 4: LOW NOISE AMPLIFIER. (Endorsed by AENOR in May of 1995.)
  • UNE-EN ISO 17943:2016 Water quality - Determination of volatile organic compounds in water - Method using headspace solid-phase micro-extraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS) (ISO 17943:2016)
  • UNE-EN 16691:2016 Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)

RU-GOST R, How to use the micro sampler

  • GOST R 55361-2012 Milk fat, butter and butter paste made from cow milk. The rules of tests acceptance, sampling and control methods
  • GOST 16598-1980 Manganese ores, concentrates and agglomerates. Methods of sampling and preparation of samples for chemical analysis and determination of moisture content
  • PNST 121-2016 Automobile roads of general use. The mineral materials for the preparation of asphalt mixtures. Method of sampling
  • GOST 15054-1980 Iron ores, concentrates, agglomerates and pellets. Methods of sampling and sample preparation for chemical analysis and determination of moisture content
  • GOST R 55642-2013 Lifting platforms for persons with impaired mobility. Rules and methods of examinations (tests) and measurements. Rules of sampling
  • GOST R ISO 3951-2-2015 Statistical methods. Sampling procedures for inspection by variables. Part 2. General specification for single sampling plans indexed by AQL for lot-by-lot inspection of independent quality characteristics

Korean Agency for Technology and Standards (KATS), How to use the micro sampler

  • KS D ISO 22489:2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
  • KS I ISO 9391:2006 Water quality－Sampling in deep waters for macro-invertebrates(Guidance on the use of colonization, qualitative and quantitative samplers)
  • KS W ISO 5884:2007 Aerospace－Fluid systems and components－Methods for system sampling and measuring the solid particle contamination of hydraulic fluids
  • KS I ISO 8265-2007(2012) Water quality－Design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters
  • KS X ISO 14648-2-2007(2022) Micrographics－Quality control of COM recorders that generate images using a single internal display system－Part 2：Method of use
  • KS I ISO 8265:2007 Water quality－Design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters
  • KS L ISO 4787-2016(2021) Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
  • KS I ISO 18857-1:2021 Water quality — Determination of selected alkylphenols —Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
  • KS C IEC 61591-2015(2020) Household range hoods and other cooking fume extractors — Methods for measuring performance
  • KS C CISPR 19-2004(2009) Electromagnetic compatibility(EMC)－ Guidance on the use of the substitution method for measurement of radiation from microwave ovens for frequencies above 1 GHz
  • KS M ISO 11125-1:2002 Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 1：Sampling
  • KS M ISO 11125-1-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 1：Sampling
  • KS M ISO 11125-1:2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling
  • KS B 0713-2-2012 Methods for the calibration of vibration and shock pick-ups－Part 2 : Primary shock calibration by light cutting
  • KS L ISO 4787:2006 Laboratory glassware-Volumetric glassware-Methods for use and testing of capacity
  • KS L ISO 4787:2016 Laboratory glassware－Volumetric glassware－Methods for use and testing of capacity
  • KS M ISO 11127-1:2012 Preparation of steel substrates before application of paints and related products-Test methods for non-metallic blast-cleaning abrasives-Part 1:Sampling
  • KS M ISO 11127-1-2012(2017) Preparation of steel substrates before application of paints and related products－Test methods for non-metallic blast-cleaning abrasives－Part 1：Sampling
  • KS M ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling
  • KS C CISPR 19-2004 Electromagnetic compatibility(EMC)- Guidance on the use of the substitution method for measurement of radiation from microwave ovens for frequencies above 1 GHz
  • KS C IEC 61193-2-2009(2020) Quality assessment systems－Part 2：Selection and use of sampling plans for inspection of electronic components and packages
  • KS I ISO 17736:2020 Workplace air quality — Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography

KR-KS, How to use the micro sampler

  • KS D ISO 22489-2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
  • KS M ISO 8220-2003(2023)
  • KS I ISO 18857-1-2021 Water quality — Determination of selected alkylphenols —Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection
  • KS M ISO 11125-1-2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling
  • KS M ISO 11127-1-2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling
  • KS I ISO 17736-2020 Workplace air quality — Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography

未注明发布机构, How to use the micro sampler

  • DIN EN 60705:2005 Microwave ovens for domestic use and similar purposes – Methods for measuring suitability for use
  • BS 4845-1:1972(2007) Method for Sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags — Part 1 : Sampling of coke
  • BS 6070-7:1981(2011) Methods of Sampling and test for sodium carbonate for industrial use — Part 7 : Determination of copper content
  • BS ISO 25597:2013(2015) Stationary source emissions — Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
  • BS 6075-12:1981(2011) Methods of Sampling and test for sodium hydroxide for industrial use — Part 12 : Determination of copper content
  • BS 4845-2:1979(2007) Methods for Sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags — Part 2 : Sampling of solid smokeless fuels other than coke
  • BS 598-112:2004(2010) Sampling and examination of bituminous mixtures for roads and other paved areas — Part 112 : Method for the use of road surface hardness probe
  • BS EN 60835-3-4:1997(2000) Methods of measurement for equipment used in digital microwave radio transmission systems — Part 3 : Measurements on satellite earth stations — Section 3.4 Low noise amplifier
  • BS 6092-12:1981(2011) Methods of Sampling and test for sodium and potassium silicates for industrial use — Part 12 : Limit test for sulphate content of sodium metasilicate

Lithuanian Standards Office , How to use the micro sampler

  • LST CEN ISO/TS 29843-2:2021 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS 29843-2:2021)
  • LST EN 1076-2010 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
  • LST EN 838-2010 Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods
  • LST EN ISO 18857-1:2006 Water quality - Determination of selected alkylphenols - Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection (ISO 18857-1:2005)

GOSTR, How to use the micro sampler

  • PNST 305-2018 Rolling stock working on liquefied natural gas. Methods for taking samples and analyzing the content of oils and impurities in the used liquefied natural gas

RO-ASRO, How to use the micro sampler

  • STAS SR ISO 5884:1996 Aerospace - Fluid systems and components - Methods for system sampling and measuring the soiid partide contamination of hydraulic fluids

The American Road & Transportation Builders Association, How to use the micro sampler

  • AASHTO TP 83-2010 Standard Method of Test for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar Revision 1
  • AASHTO T 318-2002(R2007) Standard Method of Test for Water Content of Freshly Mixed Concrete Using Microwave Oven Drying
  • AASHTO T 318-2015 Standard Method of Test for Water Content of Freshly Mixed Concrete Using Microwave Oven Drying
  • AASHTO TP58-1999 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus 2000 Edition
  • AASHTO T 127-2002 Standard Method of Test for Sampling and Amount of Testing of Hydraulic Cement HM-22; Part IIA; ASTM Designation: C 183-97

Association of German Mechanical Engineers, How to use the micro sampler

  • VDI 4253 Blatt 2-2004 Measurement of airborne microorganisms and viruses in ambient air - Culture based method for the determination of the concentration of mould in air - Indirect method after sampling with gelatine/polycarbonate filters
  • VDI 4252 Blatt 3-2008 Measurement of airborne microorganisms and viruses in ambient air - Active sampling of bioaerosols - Separation of airborne bacteria with impingers using the principle of critical nozzle
  • VDI 2119-2013 Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration

AASHTO - American Association of State Highway and Transportation Officials, How to use the micro sampler

  • TP 83-2010 Standard Method of Test for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar (Revision 1)
  • T 318-2002 Standard Method of Test for Water Content of Freshly Mixed Concrete Using Microwave Oven Drying
  • T 318-2015 Standard Method of Test for Water Content of Freshly Mixed Concrete Using Microwave Oven Drying
  • TP23-1993 Standard Test Method for Water Content of Freshly Mixed Concrete Using Microwave Oven Drying

NZ-SNZ, How to use the micro sampler

  • NZS 4407.4.2.1:1991 Methods of sampling and testing road aggregates Test 4.2.1 Method using a nuclear surface moisture-density gauge - Direct transmission mode
  • NZS 4407.4.2.2:1991 Methods of sampling and testing road aggregates Test 4.2.2 Method using a nuclear surface moisture-density gauge - Backscatter mode
  • AS/NZS 4492.1:2000 Wool - Fleece Testing and Measurement Method 1: Weighing and Sampling Greasy Wool for Fleece Testing and Measurement
  • NZS 4407.4.2.4:1991 Methods of sampling and testing road aggregates Test 4.2.4 Calibration of a nuclear surface moisture-density gauge using standard blocks

ES-AENOR, How to use the micro sampler

VN-TCVN, How to use the micro sampler

  • TCVN 7177-2002 Water quality.Design and use of quantitative samplers for benthic macro-invertebrates on stony substrata in shallow freshwaters
  • TCVN 1044-2007 Laboratory glassware.Volumetric glassware.Methods for use and testing of capacity
  • TCVN 7220-1-2002 Water quality.Water quality assessment by use of biological index.Part 1: Methods of use of quantitative samplers for benthic nematodes and meio-benthos invertebrates on substrata in shallow freshwaters

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to use the micro sampler

  • GB/T 20494.2-2006 Micrographics. Quality control of COM recorders that generate images using a single internal display. Part 2: Method of use
  • GB/T 12810-1991 Laboratory glassware--Volumetric galssware--Methods for use and testing of capacity

国家市场监督管理总局、中国国家标准化管理委员会, How to use the micro sampler

  • GB/T 12810-2021 Laboratory glassware—Capacity methods testing and use of volumetric instruments

YU-JUS, How to use the micro sampler

  • JUS N.N6.373-1987 Radiocommunicaions .Methods of measurement for television transmitters and transposers employing insertino Test signals.Filters use in measurement

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to use the micro sampler

  • GB/T 35679-2017 Measuring method for electromagnetic parameters of solid materials at microwave frequencies using waveguide
  • GB/T 35680-2017 Measuring method for electromagnetic parameters of liquid materials at microwave frequencies using an open-ended coaxial probe

IX-CISPR, How to use the micro sampler

  • CISPR 19-1983 Guidance on the use of the substitution method for measurements of radiation from microwave ovens for frequencies above 1 GHz

Professional Standard - Medicine, How to use the micro sampler

  • YY/T 1416.3-2016 Test method for additive in single-use containers for human venous blood specimen collection.Part 3:Heparin
  • YY/T 1416.4-2016 Test method for additive in single-use containers for human venous blood specimen collection.Part 4:Fluoride
  • YY/T 1416.2-2016 Test method for additive in single-use containers for human venous blood specimen collection.Part 2: Sodium citrate

国家药监局, How to use the micro sampler

  • YY/T 1416.5-2021 Method for determination of dosage added in disposable human venous blood sample collection containers Part 5: Glycine
  • YY/T 1416.6-2021 Method for determination of dosage added in disposable human venous blood sample collection containers Part 6: Imidazolidinyl urea

CU-NC, How to use the micro sampler

  • NC 90-04-22-1988 Standards System for Metrological Assurance. Glass-made Capacity Measures for General Use. Methods and Means of Verification

IX-EU/EC, How to use the micro sampler

  • 93/1/EEC-1993 Commission Directive Amending Directive 77/535/EEC on the Approximation of the Laws of the Member States Relating to Methods of Sampling and Analysis for Fertilizers (Analysis Methods for Trace Elements)

European Committee for Electrotechnical Standardization（CENELEC）, How to use the micro sampler

  • EN 60835-3-4:1995 Methods of Measurement for Equipment Used in Digital Microwave Radio Transmission Systems Part 3: Measurements on Satellite Earth Stations Section 4: Low Noise Amplifier

International Electrotechnical Commission (IEC), How to use the micro sampler

  • IEC 60835-3-6:1996 Methods of measurement for equipment used in digital microwave transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High-power amplifiers
  • IEC 60835-3-4:1993 Methods of measurement for equipment used in digital microwave radio transmission systems; part 3: measurements on satellite earth stations; section 4: low noise amplifier
  • IEC 60835-3-5:1994 Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurement on satellite earth stations - Section 5: Up- and down-converters

CEN - European Committee for Standardization, How to use the micro sampler

  • PREN 17362-2019 Animal feeding stuffs: Methods of sampling and analysis - Determination of pentachlorophenol (PCP) in feed materials and compound feed by LC-MS/MS

TIA - Telecommunications Industry Association, How to use the micro sampler

  • TIA/EIA-455-45-B-1992 FOTP-45 Method for Measuring Optical Fiber Geometry Using a Laboratory Microscope (Withdrawn May@ 2003)

Aerospace, Security and Defence Industries Association of Europe (ASD), How to use the micro sampler

  • ASD-STAN PREN 2003-10-1997 Aerospace Series Titanium and Titanium Alloys Test Methods Part 10: Sampling for Determination of Hydrogen Content (Edition P 1)

Indonesia Standards, How to use the micro sampler

  How to use the micro sampler.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved