ZH
RU
ES

plastic wide mouth bottle

plastic wide mouth bottle, Total:297 items.

In the international standard classification, plastic wide mouth bottle involves: Bottles. Pots. Jars, Pharmaceutics, Laboratory medicine, Aircraft and space vehicles in general, Rubber and plastics products, Fasteners for aerospace construction, Cans. Tins. Tubes, Plastics, Medical sciences and health care facilities in general, Cases. Boxes. Crates, Miscellaneous domestic and commercial equipment, Kitchen equipment, Wastes, Products of the chemical industry, Analytical chemistry, Measurement of volume, mass, density, viscosity, Pipeline components and pipelines, Earthworks. Excavations. Foundation construction. Underground works, Packaging machinery, Microbiology, Equipment for the rubber and plastics industries, Medical equipment, Fasteners, Lamps and related equipment, Measurement of force, weight and pressure, Fluid storage devices, Storing. Warehousing, Materials for the reinforcement of composites, Manufacturing processes in the rubber and plastics industries, Materials and articles in contact with foodstuffs, Applications of information technology, Chipless working equipment, Protective equipment, Burners. Boilers, Beverages, Electrical and electronic testing, Road vehicle systems, Clothes.

Association Francaise de Normalisation, plastic wide mouth bottle

NF H35-036:1984 Bottling industry. Plastic screw finish. Parfumery type. Dimensions.
NF H35-065:1990 Bottling industrie. Plastic screw finish for flat products.
NF H35-032:1972 Plastic finishes, 26 and 29 for crown cork.
NF H35-090:1986 Bottling industry. Plastic finishes for ratched cap or sealable cap. Finishes of diameter 29 and 35 mm, special for edible oil. Dimensions.
NF H35-024:1986 Bottling industry. Plastic finishes for ratched cap or sealable cap. Finishes of 26-39-32-36-44 diameters. Dimensions.
NF H35-066:1990 Bottling industry. Plastic screw finishes, diameter 28 and 31 - 1 thread for sparkling drinks. Dimensions.
NF H35-067:1990 Bottling industry. Plastic screw finish, 1 thread, diameter 28 for sparkling drinks with outlet gaps. Dimensions.
NF H35-081:2008 Bottling industry - Glass bottles - 27, 29, 34 head cork stopper - Neck glass finish - Composite stopper - Overcapsule.
NF H35-081:1991 Bottling industry. Glass bottles. 27, 29, 34 head cork stopper. Neck glass finish. Composite stopper. Overcapsule.
NF H35-037:1987 Industries de l'embouteillage - Bague à vis plastique type "pharmacie" - Dimensions.
NF T51-037-3*NF EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Part 3 : gas pyknometer method
NF EN ISO 1675:2022 Plastiques - Résines liquides - Détermination de la masse volumique par la méthode du pycnomètre
NF EN ISO 1183-3:1999 Plastiques - Méthodes pour déterminer la masse volumique des plastiques non alvéolaires - Partie 3 : méthode utilisant un pycnomètre à gaz
NF E29-648-5*NF EN ISO 11114-5:2022 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5 : test methods for evaluating plastic liners
NF EN ISO 11114-5:2022 Bouteilles à gaz - Compatibilité des matériaux des bouteilles et des robinets avec les contenus gazeux - Partie 5 : méthodes d'essai pour l'évaluation des liners en plastique
NF T51-037-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: immersion method, liquid pyknometer method and titration method
NF T51-037-1*NF EN ISO 1183-1:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 1 : immersion method, liquid pycnometer method and titration method
NF T54-020:1995 Plastiques - Tubes en polychlorure de vinyle allégé non plastifié - Essai d'évasement à froid.
NF S93-126:1993 Infusion equipment for medical use. Part 7 : caps made of aluminium-plastics combinations for infusion bottles.
NF EN 12713:2000 Fermetures à bouchon coiffant pour récipients en matières plastiques d'une capacité nominale de 20 l à 60 l
NF EN 17679:2022 Plastiques - Films plastiques - Détermination de la résistance au déchirement sur éprouvettes trapézoïdales avec incision
NF S93-110-7*NF EN ISO 8362-7:2011 Injection containers and accessories - Part 7 : injection caps made of aluminium-plastics combinations without overlapping plastics part.
NF EN ISO 1183-1:2019 Plastiques - Méthodes de détermination de la masse volumique des plastiques non alvéolaires - Partie 1 : méthode par immersion, méthode du pycnomètre en milieu liquide et méthode par titrage
NF EN ISO 8872:2022 Capsules en aluminium et capsules en aluminium/plastique pour flacons de perfusion et d'injection - Exigences générales et méthodes d'essai

Professional Standard - Machinery, plastic wide mouth bottle

JB/T 20065.5-2014 Aluminium foil sealing machine
JB/T 20065.2-2005 Manage bottle machine
JB/T 20066-2014 Easy-folding plastic-bottle oral liquid filling&sealing machine
JB/T 20066-2005 Easy-folding plastic-bottle oral liquid filling & sealing machine
JB/T 20065.2-2014 Plastic bottle unscrambler
JB/T 20151-2013 Plastic ampoule blow-fill-seal machine
JB/T 20065.1-2005 Production line for plastic bottle pack
JB/T 20065.1-2014 Production line for plastic bottles pack
JB/T 20095-2007 Integrated machine of washing, filling and sealing for plastic infusion bottle
JB/T 20095-2014 Plastic bottle large volume infusion washing filling and sealing machine
JB/T 9086-1999 Plastic bag heat sealing machine
JB/T 9086-2007 Plastic bag heating sealer

Indonesia Standards, plastic wide mouth bottle

SNI 12-1297-1989 Plastic field bottles
SNI 15-2125-1991 Glass bottles for drinks using hot filling
SNI 06-0939-2006 High density polyethylene (HPDE) for plastic bottles
SNI 19-2946-1992 Plastics bottles for drugs, food and cosmetics

Group Standards of the People's Republic of China, plastic wide mouth bottle

T/CVDA 6-2019 Veterinary oral liquid heat-seal plastic bottle
T/CVDA 5-2019 Veterinary oral solid heat seal plastic bottle
T/SHBX 009-2022 One-step injection and blow molding bottles for ultra - clean filling oral liquid
T/YNZJ 006-2022 polyolefin plastic bottle
T/ZJYBF 0002-2020 Aluminum－plastic combination caps for oral liquid bottles
T/WJDGC 0001-2021 Plastic bottles for food packaging
T/SDAHA 005-2023 Polyethylene blow molded bottles for veterinary drug oral solutions
T/CRRA 0103-2020 Specification for the recycling of plastic infusion bottle (bag)
T/ZZB 1056-2019 Plastic vacuum bottle for cosmetic packaging
T/SYXB 0002-2019 Plastic vacuum bottle for cosmetic packaging
T/CIET 094-2023 Plastic bottle for solid food packaging
T/XJSL 0002-2018 Disposable plastic yogurt cup(bottles;boxes;cans)
T/QGCML 1453-2023 Technical specifications for hollow blow molding of polyethylene plastic bottles
T/GDPIA 38-2021 Technical specifications for recycling of waste plastic bottles
T/ZZB 0888-2018 Plastic woven valve sack
T/SGX 004-2018 Rapid distinguish of imported recycled plastic pellet and imported solid plastic waste
T/ZZB 0995-2019 Outdoor plasticdouble decker cup
T/NBSL 003-2021 Special material for plastic polypropylene (PP) meltblown masks
T/CATSI 02007-2020 Fully-wrapped carbon fiber reinforced cylinder with a plastic liner for on-board storage of compressed hydrogen for land vehicles
T/HBFPIA 001-2023 Food contact materials labeling identification and instructions for use technical specifications for plastic bottles
T/CATSI 02018-2022 Fully-wrapped carbon fiber reinforced cylinder with a plastic liner for on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013, Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automo
T/ZZB 0319-2018 Plastic bag heating continuous band sealer
T/ZZB 2441-2021 Plastics nose bridge for disposable mask

CZ-CSN, plastic wide mouth bottle

CSN 26 9311-1975 Plastic crates for bottles
CSN 26 9315-1986 Plastic crates. Verification of protective properties of bottle crates
CSN 22 8895-1960 Mouthpiece for moulding of plastics
CSN 37 0111-1958

Military Standards (MIL-STD), plastic wide mouth bottle

DOD A-A-54875-1993 SPRAY BOTTLE, PLASTIC
DOD A-A-51770-1986 BOTTLE, SCREW CAP, (PLASTIC)
DOD A-A-53342-1988 BOTTLE, SCREW CAP, (PLASTIC SQUARE)
DOD A-A-54814-1993 MASK, ORONASAL, PLASTIC, DISPOSABLE
DOD A-A-53460 A-1988 BOTTLE, SAFETY CAP (PLASTIC, LIGHT-RESISTANT, LIQUID PRESCRIPTION) [Use In Lieu Of: DOD A-A-0053460]

Xinjiang Provincial Standard of the People's Republic of China, plastic wide mouth bottle

DB65/T 2831-2007 Plastie bottle (drum) embryo

TH-TISI, plastic wide mouth bottle

TIS 1181-1993 Plastics babies bottles
TIS 517-1984 Standard for plastics bottles for pharmaceutical tablets and capsules

Taiwan Provincial Standard of the People's Republic of China, plastic wide mouth bottle

CNS 2444-1990 Polyethylene Bottle
CNS 2445-1990 Method of Test for Polyethylene Bottle
CNS 11938-1987 Sprue Puller of Molds for Plastics
CNS 6551-1980 Sprue Bushings of Molds for Plastics
CNS 14624-7-2002 Infusion equipment for medical use-Part 7：Caps made of aluminum-plastics combinations for infusion bottles
CNS 14624.7-2002 Infusion equipment for medical use-Part 7：Caps made of aluminum-plastics combinations for infusion bottles

Gansu Provincial Standard of the People's Republic of China, plastic wide mouth bottle

DB62/T 2667-2016 Plastic (PET) Bottles for Food

NL-NEN, plastic wide mouth bottle

NEN 2640-1968 Wide-necked glass bottles with capsule or crown-cork finish suitable to milk and milkproducts

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, plastic wide mouth bottle

GB/T 5738-1995 Plastic crates for beverage bottled
GB/T 17876-1999 Packaging volume plastic pilferproof closure
GB/T 17876-2010 Packaging container.Tamper-evident plastic closure
GB/T 1033.3-2010 Plastics.Methods for determining the density of non-cellular plastics.Part 3:Gas pyknometer method
GB/T 15223-2008 Plastics.Liquid resins.Determination of density by the pyknometer method
GB/T 26995-2011 General specification for rinsing-filling-capping machine of plastic bottle
GB/T 38463-2020 General specification for ultra-clean plastic bottle filling machine
GB/T 6673-2001 Plastics film and sheeting determination of length and width
GB/T 41709-2022 Carbon-fibre-reinforced plastics—Determination of the size and aspect ratio of crushed objects
GB/T 1033.1-2008 Plastics.Methods for determining density of non-celluar plastics.Part1:Immersion method,liquid pyknometer method and titration method
GB/T 42612-2023 Compressed hydrogen plastic liner carbon fiber fully wound gas cylinder for vehicles
GB/T 42610-2023 Test method for compatibility between plastic liner and hydrogen gas of high-pressure hydrogen cylinder
GB/T 25278-2010 Plastics.Determination of the fluidity of plastics using capillary and slit-die rheometers
GB/T 4169.19-2006 Components of injection moulds for plastics.Part 19:Sprue bush

SE-SIS, plastic wide mouth bottle

SIS 84 50 22-1970 Plastic screw caps. Type B
SIS 84 50 21-1970 Plastic screw caps. Type A
SIS 84 50 02-1970 GL screw threads for plastic closures for glass containers
SIS SS 16 11 38-1980 Plastics — Liquid resins — Determination of density by the pyknometer method

Professional Standard-Packaging, plastic wide mouth bottle

BB/T 0025-2004 30/25mm Plastic pilferproof closure
BB/T 0044-2007 Packing containers.Plastic bottle for packing of pesticides

Aerospace Industries Association, plastic wide mouth bottle

AIA NAS 3438-1971 Vial, Plastic (Rev. 1)
AIA NAS 838-1998 Plug - Protective, Flareless Tube End (Plastic) FSC 5340
AIA NAS 246-1947 (Inactive)Union - Flared Tube, Plastic (Rev. 2)

AIA/NAS - Aerospace Industries Association of America Inc., plastic wide mouth bottle

NAS3438-1971 Vial@ Plastic (Rev 1)
NAS3438-2012 VIAL@ PLASTIC (Rev 2)
NAS277-1946 Protector-Flared Tube@ Plastic
NAS246-1947 Union - Flared Tube@ Plastic (Rev 2)
NAS272-1947 Cross - Flared Tube Plastic (Rev 2)
NAS247-1947 Reducer - Flared Tube Plastic (Rev 2)
NAS832-2011 CAP@ PROTECTIVE@ FLARED FITTING (PLASTIC) (Rev 1)
NAS240-1947 Nut - Flared Tube Coupling Plastic (Rev 2)
NAS266-1947 Tee - Flared Tube Run Universal Side Plastic (Rev 2)
NAS242-1947 Nut - Flared Tube Fitting Plastic Lock (Rev 2)
NAS249-1947 Nipple-Hose & Flared Tube@ Plastic (Rev 2)

IN-BIS, plastic wide mouth bottle

IS 8688-1988

British Standards Institution (BSI), plastic wide mouth bottle

BS 6728-2:1993 Thermoplastics hot water bottles - Specification for hot water bottles manufactured from polyolefin materials
BS ISO 5215:2022 Laboratory plastic ware. Volumetric flasks
BS ISO 24166-3:2022 Snap-on bottles for metering pumps - Plastic
BS EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Gas pyknometer method
21/30433786 DC BS ISO 5215. Laboratory plastic ware. Volumetric flasks
BS EN ISO 11114-5:2022 Gas cylinders. Compatibility of cylinder and valve materials with gas contents - Test methods for evaluating plastic liners
BS EN ISO 1183-1:2019 Plastics. Methods for determining the density of non-cellular plastics. Immersion method, liquid pycnometer method and titration method
BS EN 13029:2009 Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures
BS 5404-4:1979 Specification for plastics laboratory ware - Wash bottles
BS EN ISO 1183-1:2004 Plastics - Methods for determining the density of non-cellular plastics - Immersion method, liquid pyknometer method and titration method
BS EN ISO 1183-1:2012 Plastics. Methods for determining the density of non-cellular plastics. Immersion method, liquid pyknometer method and titration method
BS EN ISO 1675:2022 Tracked Changes. Plastics. Liquid resins. Determination of density by the pycnometer method
22/30445724 DC BS EN ISO 1675. Plastics. Liquid resins. Determination of density by the pycnometer method
21/30434969 DC BS EN ISO 8872. Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials. General requirements and test methods
BS EN ISO 8872:2022 Tracked Changes. Aluminium caps and aluminium/ plastic caps for infusion bottles and injection vials. General requirements and test methods
BS ISO 8536-7:2013 Infusion equipment for medical use. Caps made of aluminium-plastics combinations for infusion bottles
BS ISO 11443:2014 Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
BS EN 17679:2022 Plastics. Plastic films. Determination of tear resistance using a trapezoidal test specimen with incision
21/30396799 DC BS ISO 24166-3. Snap-on bottles for metering pumps. Part 3. Plastic
20/30392820 DC BS EN ISO 11114-5. Gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 5. Test methods for evaluating plastic liners
BS ISO 30012:2016+A1:2018 Carbon-fibre-reinforced plastics. Determination of the size and aspect ratio of crushed objects
BS 5567:1978 Specification for apertures in tinplate containers to receive plug-in plastics closures

American National Standards Institute （ANSI), plastic wide mouth bottle

ANSI/ASTM D2911:1994 Specification for Dimensions and Tolerances for Plastic Bottles

Professional Standard - Medicine, plastic wide mouth bottle

YY 0057-1991 Solid medicinal polyene plastic bottle
YY 0257-1997 Three stations injection blowing machine for molding plastic bottles

Shanghai Provincial Standard of the People's Republic of China, plastic wide mouth bottle

DB31/ 50-1990 PET plastic bottle for food packaging

BE-NBN, plastic wide mouth bottle

NBN T 42-405-1967 Plastic pipes - Widening test

AT-ON, plastic wide mouth bottle

ONORM A 5225-1984 Bottle crate of plastic for 24 units 0,25 I wine-bottles
ONORM A 5227-1984 Bottle crate of plastic for 6 units 2 I wine-bottles
OENORM EN ISO 11114-5:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners (ISO/DIS 11114-5:2020)

Malaysia Standards, plastic wide mouth bottle

MS 1503-2000 Plastics laboratory ware-wash bottles

International Organization for Standardization (ISO), plastic wide mouth bottle

ISO 5215:2022 Laboratory plastic ware — Volumetric flasks
ISO 1675:1975 Plastics — Liquid resins — Determination of density by the pyknometer method
ISO 1675:1985 Plastics; Liquid resins; Determination of density by the pyknometer method
ISO 24166-3:2022 Snap-on bottles for metering pumps — Part 3: Plastic
ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method
ISO 1675:2022 Plastics — Liquid resins — Determination of density by the pycnometer method
ISO 8872:2022 Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials — General requirements and test methods
ISO 4592:1979 Plastics — Film and sheeting — Determination of length and width
ISO 4592:1992 Plastics; film and sheeting; determination of length and width
ISO 11114-5:2022 Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 5: Test methods for evaluating plastic liners
ISO 10985:1992 Caps made of aluminium-plastics combinations for infusion bottles and injection vials; requirements and test methods
ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
ISO/CD 1183-1:1969 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
ISO 1183-1:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method
ISO 1183-1:2019 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method
ISO 12418-1:2012 Plastics - Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates - Part 1: Designation system and basis for specifications
ISO 12418-2:2012 Plastics - Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates - Part 2: Preparation of test specimens and determination of properties

CO-ICONTEC, plastic wide mouth bottle

ICONTEC 1546-1980

RO-ASRO, plastic wide mouth bottle

SR ISO 4592:1992 Plastics-Film and sheeting-Determination of lenghth and width.
STAS 8775-1970 Plastics packages POLYETHYLENE CASES WITH INTERNAL FITTINGS FOR BOTTLES

Defense Logistics Agency, plastic wide mouth bottle

DLA A-A-55106 A VALID NOTICE 1-2001 WHISTLE, PLASTIC
DLA A-A-55106 A-1998 WHISTLE, PLASTIC

German Institute for Standardization, plastic wide mouth bottle

DIN 18124:2011 Soil, investigation and testing - Determination of density of solid particles - Capillary pyknometer, wide mouth pycnometer, gas pycnometer
DIN 6094-5:2000 Packaging - Finishes - Part 5: Finishes for sparkling wine bottles with plastics and cork stoppers and crown corks
DIN 55427:1983 Packaging means; plastic crates; 12 bottle size
DIN 10457:1988-02 Apparatus for dairy analysis; sample bottles of plastic for milk
DIN EN ISO 1183-3:2000 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999
DIN EN ISO 1183-3:2000-05 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999
DIN 16903-1:1974 Open Insert Nuts for Plastics Mouldings
DIN EN ISO 8872:2023-02 Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials - General requirements and test methods (ISO 8872:2022); German version EN ISO 8872:2022
DIN EN ISO 1675:2023-03 Plastics - Liquid resins - Determination of density by the pycnometer method (ISO 1675:2022); German version EN ISO 1675:2022
DIN 16903-2:1974 Closed Insert Nuts with Disc for Plastics Mouldings
DIN 5065:1987 Packaging; plastic closures for metal and plastic tubes
DIN 10457:1988 Apparatus for dairy analysis; sample bottles of plastic for milk
DIN EN ISO 8872:2023 Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials - General requirements and test methods (ISO 8872:2022)
DIN EN ISO 11114-5:2022-05 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners (ISO 11114-5:2022); German version EN ISO 11114-5:2022
DIN EN ISO 1183-1:2019-09 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05); German version EN ISO 1183-1:2019
DIN EN ISO 1675:2023 Plastics - Liquid resins - Determination of density by the pycnometer method (ISO 1675:2022)
DIN 55441-2:1998-05 Packaging test - Impact test - Part 2: Free drop of plastic bottles
DIN EN 17679:2022 Plastics - Plastic films - Determination of tear resistance using a trapezoidal test specimen with incision
DIN EN 17679:2022-08 Plastics - Plastic films - Determination of tear resistance using a trapezoidal test specimen with incision; German version EN 17679:2022
DIN 5065:2010 Packaging - Plastic closures for metallic tubes
DIN ISO 8362-7:2007 Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006)；English version of DIN ISO 8362-7:2007-06
DIN EN ISO 11114-5:2020 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners (ISO/DIS 11114-5:2020); German and English version prEN ISO 11114-5:2020
DIN 55441-2:1998 Packaging test - Impact test - Part 2: Free drop of plastic bottles
DIN 6130:1980 Means of packaging; bottles and hollow bodies made of plastics, general tolerances for weight and brimful volume
DIN ISO 8536-7:2009 Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles (ISO 8536-7:2009)

国家市场监督管理总局、中国国家标准化管理委员会, plastic wide mouth bottle

GB/T 41345-2022 General technical requirements for compression mould for plastic closure

American Society for Testing and Materials (ASTM), plastic wide mouth bottle

ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-10 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D6615-00 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D6615-15a(2019) Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D6615-11a Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel
ASTM D2741-95(2001) Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation
ASTM D2741-95(2005) Standard Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation

Japanese Industrial Standards Committee (JISC), plastic wide mouth bottle

JIS K 3603:1990 Plastic vials for frozen storage and ultra low-temperature preservation
JIS K 7112-1:2023 Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method

Sichuan Provincial Standard of the People's Republic of China, plastic wide mouth bottle

DB51/T 1330-2011 General technical requirements for ordinary plastic bottle caps

工业和信息化部, plastic wide mouth bottle

QB/T 4049-2021 Plastic cup for drinking
QB/T 5585-2021 Determination of opening and tearing force of plastic anti-theft bottle caps

Professional Standard - Light Industry, plastic wide mouth bottle

QB/T 4049-2010 Plastic cup for drinking

Korean Agency for Technology and Standards (KATS), plastic wide mouth bottle

KS M ISO 1675:2022 Plastics — Liquid resins — Determination of density by the pyknometer method
KS P ISO 10985:2020 Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods
KS M ISO 1183-3:2003 Plastics－Methods for determining the density of non-cellular plastics－Part 3：Gas pyknometer method
KS M ISO 1183-3-2003(2018) Plastics－Methods for determining the density of non-cellular plastics－Part 3：Gas pyknometer method
KS M ISO 4592:2007 Plastics－Film and sheeting－Determination of length and width
KS M ISO 4592-2007(2017) Plastics－Film and sheeting－Determination of length and width
KS M ISO 4592-2007(2022) Plastics－Film and sheeting－Determination of length and width
KS P ISO 10985:2009 Caps made of aluminium-plastics combinations for infusion bottles and injection vials－Requirements and test methods
KS M ISO 1183-1:2014 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
KS B 4163-2000 Nipples and plugs of cooling system of moulds for plastics
KS B 4163-1987 Nipples and plugs of cooling system of moulds for plastics
KS P ISO 8362-6:2020 Injection containers and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials
KS P ISO 8362-7:2009 Injection containers and accessories－Part 7：Injection caps made of aluminium-plastics combinations without overlapping plastics part
KS P ISO 8536-7:2020 Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles

KR-KS, plastic wide mouth bottle

KS M ISO 1675-2022 Plastics — Liquid resins — Determination of density by the pyknometer method
KS P ISO 10985-2020 Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods
KS P ISO 8362-6-2020 Injection containers and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials
KS P ISO 8536-7-2020 Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles

未注明发布机构, plastic wide mouth bottle

BS EN ISO 1675:1998(1999)*BS 2782-6-Method 620E:1998 Plastics — Liquid resins — Determination of density by the pyknometer method
BS EN ISO 1183-3:1999(2003) Plastics — Methods for determining the density of non - cellular plastics — Part 3 : Gas pyknometer method
BS 5404-4:1979(2011) Specification for Plastics laboratory ware — Part 4 : Wash bottles

GM North America, plastic wide mouth bottle

GM 9985193-1973 Tape Pressure Sensitive Adhesive, Reinforced Plastic, 0.38 Inch Wide
GM GM3628M-1989 Hot Melt Sealer, Closed-Cell Foam-in-Place Thermoplastic
GM 9981145-1988 Sealer - Synthetic Resin Plastic Thumbgrade
GM 9985157-1980 Sealer Limited-Flow, Self-Leveling, Plastisol

Danish Standards Foundation, plastic wide mouth bottle

DS/EN ISO 1183-3:2000 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method
DS/EN ISO 1675:1999 Plastics - Liquid resins - Determination of density by the pyknometer method
DS/EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method

FI-SFS, plastic wide mouth bottle

SFS-ISO 1675 E:1986 This standard is approved in English

RU-GOST R, plastic wide mouth bottle

GOST 2746.1-1988 Plastic Edison screw lampholders. Specifications

Professional Standard - Commodity Inspection, plastic wide mouth bottle

SN/T 0906-2000 Method for injection moulding test spcimens of thermoplastic materials for import and export
SN/T 2139-2008 Rules for the inspection of plastic products for import and export
SN/T 0957-2000 Rules for the inspection of plastic toys for import and export
SN/T 2739-2010 Test for safety properties of plastic raw materials imported for electronic equipments
SN/T 3008-2011 Determination of cadmium content in plastics and plastics products for import and export. Wet decomposition method
SN/T 0768-1999 Rule for inspection of water contained plastic ornament for export

Fujian Provincial Standard of the People's Republic of China, plastic wide mouth bottle

DB35/T 1900-2020 Test method for resistance to internal pressure and expansion rate of carbonated beverage plastic bottles

HU-MSZT, plastic wide mouth bottle

MSZ 9980/11.lap-1957

PT-IPQ, plastic wide mouth bottle

NP 2215-1986

VN-TCVN, plastic wide mouth bottle

TCVN 6039-3-2008 Plastics.Methods for determining the density of non-cellular plastics.Part 3: Gas pyknometer method
TCVN 6039-1-2008 Plastics.Methods for determining the density of non-cellular plastics.Part 1: Immersion method, liquid pyknometer method and titration method
TCVN 6039-1-2015 Plastics - Methods for determining the density of non-cellular plastics .Part 1:Immersion method,liquid pyknometer method and titration method

Society of Automotive Engineers (SAE), plastic wide mouth bottle

SAE AS6264-1-1954 AS6264-6267 Filler Cap - Small Plastic
SAE AS3107-2-1948 AS3107-3110 Filler Cap - Small, Plastic

Professional Standard - Aerospace, plastic wide mouth bottle

QJ 876.3-1984 Plastic Extrusion Mold Gate Plate
QJ 876.4-1984 Plastic Extrusion Mold Gate Plate
QJ 876.2-1984 Plastic Extrusion Mold Gate Plate
QJ 891-1984 Plastic Extrusion Mold Sprue Bushing
QJ 876.1-1984 Plastic Extrusion Mold Gate Plate

Standard Association of Australia （SAA）, plastic wide mouth bottle

AS 2764:2002 Fibre reinforced plastics (FRP) aluminium alloy gas cylinders - Hoop overwrapped

European Committee for Standardization (CEN), plastic wide mouth bottle

EN ISO 1183-3:1999 Plastics - Methods for Determining the Density of Non-Cellular Plastics - Part 3: Gas Pyknometer Method ISO 1183-3:1999
EN ISO 11114-5:2022 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners (ISO 11114-5:2022)
EN ISO 1183-1:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)
EN 28701:2012 Intelligent transport systems - Public transport - Identification of Fixed Objects in Public Transport (IFOPT)
EN ISO 1183-1:2012 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
FprEN ISO 11114-5:2021 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners (ISO/FDIS 11114-5:2021)
EN ISO 1183-1:2004 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method ISO 1183-1:2004

Lithuanian Standards Office , plastic wide mouth bottle

LST EN ISO 1183-3:2001 Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999)
LST EN ISO 1675:2000 Plastics - Liquid resins - Determination of density by the pyknometer method (ISO 1675:1985)
LST EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)

AENOR, plastic wide mouth bottle

UNE-EN ISO 1183-3:2000 PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 3: GAS PYKNOMETER METHOD (ISO 1183-3:1999)
UNE-EN ISO 1675:2000 PLASTICS - LIQUID RESINS - DETERMINATION OF DENSITY BY THE PYKNOMETER METHOD (ISO 1675:1985)
UNE-EN ISO 1183-1:2013 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)

ES-AENOR, plastic wide mouth bottle

UNE 53-409-1990

ES-UNE, plastic wide mouth bottle

UNE-EN ISO 8872:2023 Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials - General requirements and test methods (ISO 8872:2022)
UNE-EN ISO 11114-5:2022 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners (ISO 11114-5:2022)
UNE-EN ISO 1183-1:2019 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019, Corrected version 2019-05)
UNE-EN 17679:2023 Plastics - Plastic films - Determination of tear resistance using a trapezoidal test specimen with incision

Professional Standard - Electron, plastic wide mouth bottle

SJ/T 10519.20-1994 Components of injection mould for plastics.Gating insert
SJ/T 10519.19-1994 Components of injection mould for plastics.Universal sprue bush

Professional Standard - Agriculture, plastic wide mouth bottle

169兽药典三部-2015 Appendix Table of Contents Specific Excipients 3604 Quality Standards for Veterinary Liquid Vaccine Plastic Bottles

WRC - Welding Research Council, plastic wide mouth bottle

BULLETIN 99-1964 EXPERIMENTS ON BRACED WIDE-FLANGE BEAMS THE EXPERIMENTAL BASES FOR PLASTIC DESIGN

IT-UNI, plastic wide mouth bottle

CU-NC, plastic wide mouth bottle

NC 97-104-1988 Packing and Packaging. Plastic Bottles. Determination of Wall Thickness. Testing Method

Military Standard of the People's Republic of China-General Armament Department, plastic wide mouth bottle

GJB 3537A-2021 Specification for fiber-reinforced plastic broadband radomes for electronic countermeasures
GJB 3537-1999 Specification for fiber-reinforced plastic broadband radomes for electronic countermeasures
GJB 1086-1991 7424 Glass fiber reinforced plastic (glass fiber reinforced plastic) spherical gas cylinder for torpedo launcher

Aerospace Industries Association/ANSI Aerospace Standards, plastic wide mouth bottle

AIA/NAS NAS838-2012 PLUG, PROTECTIVE, FLARELESS TUBE END, PLASTIC
AIA/NAS NAS832-2011 CAP, PROTECTIVE, FLARED FITTING (PLASTIC) (Rev 1)

PL-PKN, plastic wide mouth bottle

PN O79785-1987 Plastics packagee Closures from polyolefins to genera? glass jars TO

BR-ABNT, plastic wide mouth bottle

ABNT NBR 14638-2011 Plastic packaging for mineral water and drinking table - carboy returnable - Requirements for distribution

Professional Standard - Automobile, plastic wide mouth bottle

QC/T 892-2011 Open end blind rivets with break pull mandrel and protruding head for plastic parts