ZH
RU
ES

Contact plate operation

Contact plate operation, Total:500 items.

In the international standard classification, Contact plate operation involves: Rotating machinery, Electrical accessories, Equipment for railway/cableway construction and maintenance, Aerospace electric equipment and systems, Materials and articles in contact with foodstuffs, Kitchen equipment, Air quality, Welding, brazing and soldering, Applications of information technology, Alarm and warning systems, Electric traction equipment, Railway rolling stock, Pumps, Insulation, Power transmission and distribution networks, Farming and forestry, Ergonomics, Vocabularies, Industrial automation systems, Nuclear energy engineering, Veterinary medicine, Materials for the reinforcement of composites, Electricity. Magnetism. Electrical and magnetic measurements, Shipbuilding and marine structures in general, Radiocommunications, Dentistry, Aerospace fluid systems and components, Occupational safety. Industrial hygiene, Transport, Earth-moving machinery, Graphical symbols, Clothes, Information sciences. Publishing, Electronic display devices, Fruits. Vegetables, Audio, video and audiovisual engineering, Telecommunication terminal equipment, Mobile services, Open systems interconnection (OSI), Fasteners for aerospace construction, Software development and system documentation, Manufacturing forming processes, Noise with respect to human beings, Acoustics and acoustic measurements, Protection of and in buildings, Electronic components in general, Lamps and related equipment, Protection against electric shock, Electrical equipment for working in special conditions, Electromechanical components for electronic and telecommunications equipment, Company organization and management, Pipeline components and pipelines, Power stations in general, On-board equipment and instruments, Protection against fire, Installations in buildings, Inland navigation vessels, Switchgear and controlgear, Electrical engineering in general, Valves, Non-ferrous metals, Telecommunications in general, MANUFACTURING ENGINEERING, Languages used in information technology, Networking, Horology, Office machines, Safety of machinery, Cinematography, Petroleum, petroleum products and natural gas handling equipment, Information technology (IT) in general, Metrology and measurement in general, Components for electrical equipment, Telecommunication services. Applications, Agricultural machines, implements and equipment, Telecontrol. Telemetering, Hand-held tools, Coals, Fuels, Interface and interconnection equipment, Passenger cars. Caravans and light trailers.

United States Navy, Contact plate operation

• NAVY MIL-C-22909 B NOTICE 1-1997 CRIMPING TOOL, TERMINAL AND CONNECTOR CONTACT, HYDRAULIC OPERATED
• NAVY MIL-C-22909 B SUPP 1-1972 CRIMPING TOOL, TERMINAL AND CONNECTOR CONTACT, HYDRAULIC OPERATED
• NAVY MIL-C-22909 B-1972 CRIMPING TOOL, TERMINAL AND CONNECTOR CONTACT, HYDRAULIC OPERATED
• NAVY MS25441 REV C NOTICE 1-1997 CRIMPING TOOL, TERMINAL, HYDRAULIC OPERATED, WIRE SIZE 8 THRU 4/0
• NAVY MS25441 REV C-1964 CRIMPING TOOL, TERMINAL, HYDRAULIC OPERATED, WIRE SIZE 8 THRU 4/0

American Society for Testing and Materials (ASTM), Contact plate operation

• ASTM B615-79(2011) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
• ASTM B868-96(2013) Standard Practice for Contact Performance Classification of Electrical Connection Systems
• ASTM D6058-96(2006) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
• ASTM D6058-96(2001) Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
• ASTM D6058-96 Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment
• ASTM D6193-11 Standard Practice for Stitches and Seams
• ASTM F1844-97(2002) Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
• ASTM F1844-97 Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage
• ASTM B667-97 Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
• ASTM E1643-11 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
• ASTM F2620-11 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
• ASTM D2657-97 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
• ASTM E749/E749M-12 Standard Practice for Acoustic Emission Monitoring During Continuous Welding
• ASTM E1643-10 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
• ASTM E1643-18 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
• ASTM E1643-18a Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
• ASTM E1643-11(2017) Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
• ASTM F2620-11e1 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
• ASTM F402-05(2012) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
• ASTM F1290-98a(2011) Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
• ASTM E2818-11 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
• ASTM E3310/E3310M-22 Standard Test Method for Evaluating Ground Robot Capabilities and Remote Operator Proficiency: Maneuvering: Align Ground Contacts with Parallel Rails
• ASTM D7569-10 Standard Practice for Determination of Gas Content of Coal-Direct Desorption Method
• ASTM D4418-00(2011) Standard Practice for Receipt, Storage, and Handling of Fuels for
  Gas Turbines

YU-JUS, Contact plate operation

• JUS N.K5.011-1979 Low-voltage controlgear. Contactors. Information to begiven by the userwhen conditions for operation in service differ from the standard

RU-GOST R, Contact plate operation

• GOST R 56622-2015 Removable insulating towers for operation on the railway contact network. Specifications
• GOST 14265-1979 Direct acting analogue contact electrical measuring instruments. General specifications
• GOST R 53526-2009 Welding personnel. Approval testing of welding operators for fusion welding and of resistance weld setters for fully mechanized and automatic welding of metallic materials
• GOST 20494-2001 Insulating operative rods and rods for movable grounding. General specifications
• GOST R 55949-2014 Power supply interface at the input to telecommunications equipment. Operated by alternating current (ac)
• GOST R 55950-2014 Power supply interface at the input to telecommunications equipment. Operated by direct current (dc)
• GOST 25852-1983 Electric contacts from noble metals and their alloys. Specifications

未注明发布机构, Contact plate operation

• BS 2G 132:1981(1999) Specification for General requirements for electromagnetically operated contactors for aircraft
• DIN EN ISO 19363:2022 Electrically powered road vehicles – Contactless energy transfer – Safety and interoperability requirements (ISO 19363:2020)
• GJB 7714-2012 Military embedded real-time operating system application programming interface

VN-TCVN, Contact plate operation

• TCVN 4797-1989 Friction muffs mechanically operated with magnetic contactor.Nominal torsional moments
• TCVN 5509-2009 Workplace air.Silica in respirable dusts.Maximum exposure limit (MEL)

PL-PKN, Contact plate operation

• PN E04063-05-1987 On-load tap changers Test methodes Operation time of diverter switch contacts
• PN E81106-1985 Welding Single operator type arc welding transformers Requirements and tests
• PN M69900-04-1987 Welding Performance qualification tests for automatic arc machin? operators

US-CFR-file, Contact plate operation

• CFR 46-196.37-5-2014 Shipping. Part196:Operations. Section196.37–5:General alarm bell contact makers.
• CFR 7-764.251-2013 Agriculture. Part764:Direct loan making. Section764.251:Operating loan uses.

CZ-CSN, Contact plate operation

• CSN 34 3109-1997 Safety regulations for the operations on overhead-contact system and in its immediate neighbourhood
• CSN 02 4646 Z1-1996
• CSN ON 65 0210-1964
• CSN 25 7035-1982 Pressure gauges. Operating deformational pressure gauges. Methods of manufacturing and connecting dimensions
• CSN 18 6509-1990 Manipulating industrial robots. Mechanical interfaces. Circular (form A).

Aeronautical Radio Inc., Contact plate operation

• ARINC 627-2 ITEM 4.0-2002 Operator Interface
• ARINC 716-11 ITEM 4.0 Transceiver Unit Design for the 8.33 kHz Channel-Spaced Mode of Operation

Association Francaise de Normalisation, Contact plate operation

• FD C18-531:2022 Prescriptions de sécurité électrique pour le personnel exposé au risque électrique lors d'opérations d'ordre non électrique et lors d'opérations d'ordre électrique simples
• NF C48-333-1:1997 Alarm systems. Access control systems for use in security applications. Part 1 : system requirements.
• NF E60-151*NF ISO 29262:2013 Production equipment for microsystems - Interface between end effector and handling system
• NF A88-111:1992 Welding - Qualification of welders and operators
• NF P99-410:2022 Billettique appliquée aux transports - Règles d'interopérabilité pour la codification des données billettiques - Billets sans contact (INTERTIC)
• NF EN ISO 20349-2/A1:2020 Equipement de protection individuelle - Chaussures de protection contre les risques dans les fonderies et lors d'opérations de soudage - Partie 2 : exigences et méthodes d'essai pour la protection contre les risques lors d'opérations de soudage e...
• NF C42-140:1977 Electrical Measuring Instruments Indirect acting electrical measuring instruments
• FD P99-416:2014 E-ticketing for the transportation sector - Interoperability rules for the codification of e-ticketing data - Contactless tickets - FD INTERTIC
• NF Z84-396-10*NF EN 300396-10:2002 Terrestrial trunked radio (TETRA) - Technical requirements for direct operation (DMO) - Part 10 : managed direct operation (M-DMO).
• FD P99-416:2022 Billettique appliquée aux transports - Règles d'interopérabilité pour la codification des données billettiques - Billets sans contact - fascicule de documentation INTERTIC
• NF EN 300396-10:2002 Télécommunications - Réseaux radio transeuropéens (TETRA) - Exigences techniques pour le fonctionnement en mode direct - Partie 10 : gestion du fonctionnement en mode direct
• NF A88-112:1998 Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials.
• NF S31-084:2002 Acoustics - Method for measuring noise exposure levels in work environments.
• NF P99-410:2014 Transport sector computer ticketing - Interoperability rules for the codification of computer ticketing data - Contactless small memory tickets (INTERTIC)
• NF E61-132:2003 Manipulating industrial robots - Mechanical interfaces - Part 2: shafts
• NF E61-131:2004 Manipulating industrial robots - Mechanical interfaces - Part 1: plates
• NF A87-004-3*NF EN ISO 25239-3:2020 Friction stir welding - Aluminium - Part 3 : qualification of welding operators
• NF S86-622:1977 Horology. Electronic watches. Dimensions for connecting the case and the push-button.
• NF A32-040:1991 Foundry products. Steel castings. Qualification of a welding procedure.
• CWA 16558:2013 Business Interoperability Interfaces for Public procurement in Europe - BII Architecture
• NF C93-490-1:1998 SOLDERLESS CONNECTIONS. PART 1 : WRAPPED CONNECTIONS. GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE. (EUROPEAN STANDARD EN 60 352-1).
• NF X41-508:1956 Protection - Méthode rapide pour l'étude préalable du pouvoir insecticide de produits agissant par contact.
• NF EN ISO 20349-2:2017 Équipement de protection individuelle - Chaussures de protection contre les risques dans les fonderies et lors d'opérations de soudage - Partie 2 : exigences et méthodes d'essai pour la protection contre les risques lors d'opérations de soudage ...
• CWA 16559:2013 Business Interoperability Interfaces for Public procurement in Europe - Tender Notification
• NF X08-050-3:2009 Systèmes de sécurité photoluminescents - Partie 3 : mise en oeuvre, réception et maintenance
• NF A80-200-1:2005 Welding - Qualification of welders and of armour plating welding operators - Part 1 : steels.
• NF A80-200-2:2005 Welding - Qualification of welders and of armour plating welding operators - Part 2 : aluminium.
• NF EN ISO 14732:2013 Personnel en soudage - Épreuve de qualification des opérateurs soudeurs et des régleurs en soudage pour le soudage mécanisé et le soudage automatique des matériaux métalliques
• NF EN 61110:1993 Instruments de navigation - Récepteurs des systèmes oméga et oméga différentiel pour navires. Exigences opérationnelles et de fonctionnement. Méthodes d'essais et résultats exigibles
• NF L54-101-202*NF EN 4626-202:2009 Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 oC to 125 oC (cable dependent) - Flush contacts - Part 202 : optical contact assembly for 900 Šm buffe
• NF C48-358-3:2011 Monitoring and alarm receiving centre - Part 3 : procedures and requirements for operation.
• NF C48-358-3:2014 Monitoring and alarm receiving centre - Part 3 : procedures and requirements for operation

German Institute for Standardization, Contact plate operation

• DIN EN ISO 8442-8:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000
• DIN 87343:2017-02 Remote handling tubes for manual operation - Welded joints
• DIN 87344:2017-03 Remote handling tubes for manual operation - Push-in joints
• DIN EN ISO 8442-6:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000
• DIN 87343:2017 Remote handling tubes for manual operation - Welded joints
• DIN 87351:2017-03 Remote handling tubes for manual operation - Spindle extensions, push-in connections, rectangular welded pivots
• DIN EN 2349-304:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time; German and English version EN 2349-304:2006
• DIN EN 300396-10:2003-04 Terrestrial Trunked Radio (TETRA) - Technical requirements for Direct Mode Operation (DMO) - Part 10: Managed Direct Mode Operation (M-DMO) (Endorsement of the English version EN 300396-10 V 1.1.2 (2002-08) as German standard) / Note: DIN ETS standards...
• DIN EN 300396-10:2003 Terrestrial Trunked Radio (TETRA) - Technical requirements for Direct Mode Operation (DMO) - Part 10: Managed Direct Mode Operation (M-DMO) (Endorsement of the English version EN 300396-10 V 1.1.2 (2002-08) as German standard)
• DIN EN ISO 8442-7:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000
• DIN 87344:2017 Remote handling tubes for manual operation - Push-in joints
• DIN EN 60512-15-8:1996 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations; section 8: Test 15h: Contact retention system resistance to tool application (IEC 60512-15-8:1
• DIN 43458:2000 Disconnectors, earthing switches and load break disconnectors with rated voltage 52 kV - Coupling for hand operation of motor-operated mechanisms
• DIN EN ISO 25239-3:2020-12 Friction stir welding - Aluminium - Part 3: Qualification of welding operators (ISO 25239-3:2020); German version EN ISO 25239-3:2020
• DIN 87374:2018-11 Remote control gear with transmission tubing - Deck operating devices, welding-in type
• DIN EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals (IEC 61310-1:2007); German version EN 61310-1:2008
• DIN 87351:2017 Remote handling tubes for manual operation - Spindle extensions, push-in connections, rectangular welded pivots
• DIN 87384:2017 Remote control gear with transmission tube for manual operation - Wall control point, hinged

AT-ON, Contact plate operation

• ONORM M 9401 Beib.3-1993 Scouring plants - Test book and operating diary for contact water cleaning plants
• ONORM M 9400 Beib.3-1993 Dry cleaning equipment - Test book and operating diary for contact water cleaning plants
• ONORM EN 29409-1-1992 Manipulating industnal robots -Mechanical Interfaces -Circular (form A)
• ONORM M 7812-1-1996 Quality assurance of welding - Requirements for plants, performing welding Operations according to quality classes

Professional Standard - Machinery, Contact plate operation

• JB/T 6965-1993 Welding manipulators
• JB/T 11781-2014 Double acting non-contact sliding-vane pump

British Standards Institution (BSI), Contact plate operation

• BS ISO/IEC 7816-12:2006 Identification cards. Integrated circuit cards. Cards with contacts. USB electrical interface and operating procedures
• BS ISO/IEC 7816-12:2005 Identification cards. Integrated circuit cards - Cards with contacts. USB electrical interface and operating procedures
• BS ISO 29262:2011 Production equipment for microsystems. Interface between end effector and handling system
• BS EN ISO 9409-2:2004 Manipulating industrial robots - Mechanical interfaces - Shafts
• BS EN ISO 25239-3:2020 Friction stir welding. Aluminium - Qualification of welding operators
• BS 2G 132:1981 Specification for general requirements for electromagnetically operated contactors for aircraft
• BS EN ISO 9409-1:2004 Manipulating industrial robots - Mechanical interfaces - Plates
• BS EN 1418:1998 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
• BS EN 50518-3:2013 Monitoring and alarm receiving centre. Procedures and requirements for operation
• BS EN 50518-3:2011 Monitoring and alarm receiving centre. Procedures and requirements for operation
• BS EN ISO 6218:2015 Inland navigation vessels. Manually- and power-operated coupling devices for pushing units and coupled vessels. Safety requirements and main dimensions
• BS ISO 14346:2013 Static design procedure for welded hollow-section joints. Recommendations
• BS EN 3372-002:2007 Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65 °C to 175 °C or 200 °C continuous - Specification of performance and contact arrangement
• BS CWA 16558:2013 Business Interoperability Interfaces for Public procurement in Europe. BII Architecture
• BS CWA 16559:2013 Business Interoperability Interfaces for Public procurement in Europe. Tender Notification
• DD ENV 13735:2001 Health informatics. Interoperability of patient connected medical devices
• BS EN 60352-5:2012 Solderless connections. Press-in connections. General requirements, test methods and practical guidance
• BS EN 61968-8:2016 Application integration at electric utilities. System interfaces for distribution management. Interfaces for customer operations
• BS EN 50632-2-19:2016 Electric motor-operated tools. Dust measurement procedure. Particular requirements for jointers

IN-BIS, Contact plate operation

• IS 3043-1966
• IS 3016-1982
• IS 3664-1981
• IS 6916-1973
• IS 5822-1970
• IS 4461-1979
• IS 3845-1966
• IS 1323-1982
• IS 5845-1984
• IS 9639-1980
• IS 2597 Pt.1-1964

American National Standards Institute （ANSI), Contact plate operation

• ANSI/IEEE 1628:2009 Recommended Practice for Maintenance for dc Overhead Contact Systems for Transit Systems
• ANSI/TIA/EIA 895-A-2002 CDMA Tandem Free Operation
• ANSI/TIA-895-A-2002 CDMA Tandem Free Operation
• ANSI/IEEE 1003.1:2009 Information Technology - Portable Operating System Interface (POSIX)
• ANSI/SCTE 79-2-2009 DOCSIS 2.0 Part 2: Operations Support System Interface
• ANSI C78.1406-2004 Electric Lamps - P28 Single-Contact Medium Prefocus Based Projection Lamps for Base-Down Operation - Dimensions
• ANSI/AWS C7.4/C7.4M:2008 Process Specification and Operator Qualification for Laser Beam Welding
• ANSI/SCTE 22-3-2012 Data-Over-Cable Service Interface Specification DOCSIS 1.0 Operations Support System Interface (OSSI)
• ANSI/SCTE 23-3-2010 DOCSIS 1.1 Part 3: Operations Support System Interface
• ANSI T1.257-1997 Telecommunications - Operations, Administration, Maintenance, and Provisioning (OAM&P) - Traffic Management Services and Information Model for Interfaces between Operations Systems and Network Elements

国家铁路局, Contact plate operation

• TB/T 3564-2020 Electrified railway catenary operation car catenary special flat car
• TB/T 2180-2018 Electrified Railway Catenary Maintenance Work Vehicle
• TB/T 3563-2020 Method for compiling models of electrified railway catenary operating vehicles

ZA-SANS, Contact plate operation

• NRS 040-6-2007 High-voltage operating instructions Part 6: Code of practice for earthing
• SANS 7816-12:2007 Identification cards - Integrated circuit cards Part 12: Cards with contacts - USB electrical interface and operating procedures
• SANS 61230:2009 Live working - Portable equipment for earthing or earthing and short-circuiting

American Society of Mechanical Engineers (ASME), Contact plate operation

• ASME SEC V B SE-114.2-2003 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method ASTM E114-95 (R2001)
• ASME QW-484A-2002 Suggested "Format A" for Welding Operations Qualifications (WPQ) (7/02)
• ASME QW-484B-2002 Suggested "Format B" for Welder Performance Qualifications (WPQ) (7/01)
• ASME QW-484B-2013 Suggested Format B for Welding Operator Performance Qualifications (WOPQ)
• ASME N-600-2001 Transfer of Welder, Welding Operator, Brazer, and Brazing Operator Qualifications Between Owners Section XI, Division 1

RO-ASRO, Contact plate operation

• STAS 11532-1987 COPPER-CHROME BARS AND PLATES FOR CONTACT ELECTRODES
• STAS 11969/5-1989 Mechanical operated and self-acting couplings for general use SIMPLE AND DOUBLE DISC CLUT- CHES MECHANICALLY OPERATED Calculus specifications for disc clutches selection
• STAS 12265-1984 DEVICES FOR MECHANISING WELDING OPERATIONS General lteehnical requimiienls lor quality
• STAS 11969/2-1983 Mechanical operated and self-acting couplings for general purpose FREEWHEELING COUPLINGS Basic parameters

American Railway Engineering and Maintenance-of-Way Association (AREMA), Contact plate operation

• AREMA CH 33-8-1986 Catenary and Locomotive Interaction

Xinjiang Provincial Standard of the People's Republic of China, Contact plate operation

• DB65/T 2716-2007 The Operation Standard of che Lamb Delivery and Raising

Inner Mongolia Provincial Standard of the People's Republic of China, Contact plate operation

• DB15/T 1575-2019 Dairy cow delivery operating procedures

Korean Agency for Technology and Standards (KATS), Contact plate operation

• KS A 7256-2018 Accessibility guidelines for touch interface of home appliances — Touch screen based on operating system
• KS X 3112-2006(2017) DTE/DCE interface back－up control operation using the 25－pole connector
• KS X 3112-2006(2021) DTE/DCE interface back－up control operation using the 25－pole connector
• KS B ISO 9409-1:2011 Manipulating industrial robots-Mechanical interfaces-Part 1:Plates
• KS B ISO 9409-1:2021 Manipulating industrial robots－Mechanical interfaces－Part 1：Plates
• KS B ISO 9409-2:2021 Manipulating industrial robots－Mechanical interfaces－Part 2：Shafts
• KS B ISO 9409-1:2015 Manipulating industrial robots-Mechanical interfaces-Part 1:Plates
• KS B ISO 9409-2:2015 Manipulating industrial robots-Mechanical interfaces-Part 2:Shafts
• KS B 0879-2006 Recommended practice for inert gas shielded arc welding of aluminium and aluminium alloys
• KS B 0879-1985 Recommended practice for inert gas shielded arc welding of aluminium and aluminium alloys
• KS X ISO/IEC 9945-2:2007 Information technology-Portable Operating System Interface(POSIX)-Part 2:Shell and Utilities
• KS X ISO/IEC 9945-2:2013 Information technology－Portable Operating System Interface(POSIX)－Part 2：Shell and Utilities

KR-KS, Contact plate operation

• KS A 7256-2018(2023) Accessibility guidelines for touch interface of home appliances — Touch screen based on operating system
• KS B ISO 9409-2-2021 Manipulating industrial robots－Mechanical interfaces－Part 2：Shafts
• KS B ISO 9409-1-2021 Manipulating industrial robots－Mechanical interfaces－Part 1：Plates

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Contact plate operation

• JEDEC JESD230-2012 NAND Flash Interface Interoperability
• JEDEC JESD230B-2014 NAND Flash Interface Interoperability

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Contact plate operation

• GB/T 19805-2005 Qualification test of welding operators
• GB/T 16649.12-2010 Identification cards.Integrated circuit card.Part 12:Cards with contacts.USB electrical interface and operating procedures
• GB 18528-2001 Occupational exposure limit of ultraviolet radiation in the work environment
• GB 18555-2001 Occupational exposure limit for high frequency field in the work environment
• GB 935-1989 Limit value of allowable continuous heat exposure time in hot environment
• GB/T 19399-2003 Industrial robots-Graphical user interfaces for programming and operation of robots(GUI-R)
• GB 18209.1-2000 Safety of machinery indication,marking and actuation. Part 1: Requirements for visual,auditory and tactile signals

Lithuanian Standards Office , Contact plate operation

• LST EN 1418-1999 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
• LST EN 2349-304-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time
• LST EN 300 396-10 V1.1.2-2007 Terrestrial Trunked Radio (TETRA);Technical requirements for Direct Mode Operation (DMO);Part 10: Managed Direct Mode Operation (M-DMO)

Group Standards of the People's Republic of China, Contact plate operation

• T/BPMA 0008-2020 Technical Specifications for Network Information Platform Operation of Close contacts of coronavirus disease 2019 Cases
• T/ANS 006-2021 Operation specification for remotely-handled installation and maintenance of fusion device electrical connector
• T/CCCTA 0042-2023 Capability evaluation of cementing operators
• T/CHSA 001-2019 Porcelain veneer bonding technology operation specification
• T/ZS 0257-2021 Code of operation for reinforcement Sleeve grouting connection
• T/CCSA 353-2022 Technical Guidance of Touch Operation Issues For Mobile Game
• T/TFHT Z018-2019 Manual inoculation procedures for imitating wild Cistanche deserticola
• T/SXHJ 0004-2022 Specification for examination of steel pipe straight seam welding operators
• T/LTXH 041-2023 Operation Rules for Artificial Vaccination of Organic Imitated Wild Cistanche
• T/HBAS 024-2021 Data interface specification for digitized work tickets and operation tickets in electric power system
• T/CHSA 002-2019 Specifications for clinical bonding technology of fiber root canal posts
• T/ALBCIA 004-2018 Cynomorium seed high-efficiency inoculation technology standard operating procedures
• T/WSJD 16.3-2023 Occupational Exposure Limits of Nanoscale Titanium Dioxide in the Air of Workplaces
• T/CAMETA 001019-2022 Industrial mechanism model cross-platform interface call and interoperability specification
• T/SZS 4016-2020 Technical guidelines of AI-based workplace non-contact video security surveillance

Danish Standards Foundation, Contact plate operation

• DS/ISO/IEC 7816-12:2005 Identification cards - Integrated circuit cards - Part 12: Cards with contacts: USB eletrical interface and operating procedures
• DS/EN 2349-304:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time
• DS/EN 300396-10 V1.1.2:2003 Terrestrial Trunked Radio (TETRA); Technical requirements for Direct Mode Operation (DMO); Part 10: Managed Direct Mode Operation (M-DMO)
• DS/EN ISO 25239-3:2012 Friction stir welding - Aluminium - Part 3: Qualification of welding operators
• DS/CWA 16558:2013 Business Interoperability Interfaces for Public procurement in Europe - BII Architecture
• DS/CWA 16559:2013 Business Interoperability Interfaces for Public procurement in Europe - Tender Notification
• DS/CWA 16562:2013 Business Interoperability Interfaces for public procurement in Europe - Post award profiles

Canadian Standards Association (CSA), Contact plate operation

• CAN/CSA-ISO/IEC 7816-12:2006 Identification cards - Integrated circuit cards - Part 12: Cards with contacts - USB electrical interface and operating procedures
• CSA ISO/IEC 7816-12-06:2006 Identification cards Integrated circuit cards Part 12: Cards with contacts USB electrical interface and operating procedures First Edition

ANSI - American National Standards Institute, Contact plate operation

• INCITS/ISO/IEC 7816-12:2005 Identification cards - Integrated circuit cards - Part 12: Cards with contacts - USB electrical interface and operating procedures

International Organization for Standardization (ISO), Contact plate operation

• ISO 29262:2011 Production equipment for microsystems - Interface between end effector and handling system
• ISO/IEC 7816-12:2005 Identification cards - Integrated circuit cards - Part 12: Cards with contacts - USB electrical interface and operating procedures
• ISO/TS 21623:2017 Workplace exposure - Assessment of dermal exposure to nano-objects and their aggregates and agglomerates (NOAA)
• ISO/IEC 9945:2003 Information technology -- Portable Operating System Interface (POSIX)
• ISO 15187:2000 Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R)
• ISO/IEC 14443-4:2001/Amd 1:2006 Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 4: Transmission protocol; Amendment 1: Handling of reserved fields and values
• ISO 25239-3:2020 Friction stir welding — Aluminium — Part 3: Qualification of welding operators
• ISO/TR 29123:2007 Identification Cards — Proximity Cards — Requirements for the enhancement of interoperability
• ISO 9409-1:2004 Manipulating industrial robots - Mechanical interfaces - Part 1: Plates
• ISO/IEC 14443-3:2001/Amd 3:2006 Identification cards - Contactless integrated circuit(s) cards - Proximity cards - Part 3: Initialization and anticollision; Amendment 3: Handling of reserved fields and values
• ISO/IEC 9945-2:2003 Information technology - Portable Operating System Interface (POSIX?) - Part 2: System interfaces
• ISO 14346:2013 Static design procedure for welded hollow-section joints - Recommendations
• ISO/IEC 9945-2:2002 Information technology - Portable Operating Systems Interface (POSIXę) - Part 2: System interface
• ISO 26402:2008 Agricultural vehicles - Steering systems for agricultural trailers - Interface for articulated steering device of semi-mounted trailers
• ISO 25239-3:2011 Friction stir welding - Aluminium - Part 3: Qualification of welding operators
• ISO 9409-1:1996 Manipulating industrial robots - Mechanical interfaces - Part 1: Plates (form A)

International Telecommunication Union (ITU), Contact plate operation

• ITU-T K.90-2012 Evaluation techniques and working procedures for compliance with exposure limits of network operator personnel to power-frequency electromagnetic fields (Study Group 5)
• ITU-T E.136-1997 Specification of a Tactile Identifier for Use with Telecommunication Cards - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Operation Numbering Routing and Mobile Services - International Operation - General Prov
• ITU-T Q.1 FRENCH-1988 SIGNAL RECEIVERS FOR MANUAL WORKING
• ITU-T Q.1 SPANISH-1988 SIGNAL RECEIVERS FOR MANUAL WORKING
• ITU-T E.136 FRENCH-1997 Specification of a Tactile Identifier for Use with Telecommunication Cards - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Operation Numbering Routing and Mobile Services - International Operation - General Prov
• ITU-T E.136 SPANISH-1997 Specification of a Tactile Identifier for Use with Telecommunication Cards - Series E: Overall Network Operation Telephone Service Service Operation and Human Factors Operation Numbering Routing and Mobile Services - International Operation - General Prov
• ITU-T E.651-2000 Reference Connections for Traffic Engineering of IP Access Networks Study Group 2; 16 pp
• ITU-T Q.2 SPANISH-1988 SIGNAL RECEIVERS FOR AUTOMATIC AND SEMI-AUTOMATIC WORKING USED FOR MANUAL WORKING
• ITU-T Q.2 FRENCH-1988 SIGNAL RECEIVERS FOR AUTOMATIC AND SEMI-AUTOMATIC WORKING, USED FOR MANUAL WORKING
• ITU-T Q.513 FRENCH-1993 Digital Exchange Interfaces for Operations Administration and Maintenance - Digital Exchanges (Study Group XI) 7 pp
• ITU-T Q.513 SPANISH-1993 DIGITAL EXCHANGE INTERFACES FOR OPERATIONS, ADMINISTRATION AND MAINTENANCE

NEMA - National Electrical Manufacturers Association, Contact plate operation

• NEMA EVSE 1.2-2015 EV Charging Network Interoperability Standards Part 2: A Contactless RFID Credential for Authentication (UR Interface)

(U.S.) Telecommunications Industries Association , Contact plate operation

• TIA/EIA-828-2001 BTS-BSC Inter-Operability (Abis Interface)
• TIA/EIA-829-2001 Tandem Free Operation (TFO)
• TIA-895-B-2011 CDMA Tandem Free Operation
• TIA-2001-C-2003 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Release C
• TIA-2001-E-3-2012 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces
• TIA-1167-A-2011 Interoperability Specification (IOS) for Femtocell Access Points
• TIA-1036-C-2012 Interoperability Specification for cdma2000 Air Interface
• TIA-1036-D-2014 Interoperability Specification for cdma2000 Air Interface
• TIA-1167-2010 Interoperability Specification (IOS) for Femtocell Access Points
• TIA/EIA-663-1997 Personal Communications Interface Interoperability Standard (PCI)
• TIA-1036-2005 Interoperability Test Specification for cdma2000 Air Interface
• TIA-1043-B-2011 Over the Air Interoperability Specification for cdma2000 Air Interface
• TIA-1043-2009 Over the Air Interoperability Specification for cmdma2000 Air Interface
• TIA-102.CACD-B-2013 Project 25 Inter-RF Subsystem Interface Interoperability Test Procedures for Trunked Voice Operation Involving the ISSI
• TIA-102.CACD-C-2014 Project 25 Inter-RF Subsystem Interface Interoperability Test Procedures for Trunked Voice Operation Involving the ISSI
• TIA PN 3-4545.1-RV5-2007 Interoperability Specification (IOS) for cdma2000?Access Network Interfaces ?Part 1 Overview To be published as TIA-2001.1-E
• TIA PN 3-4545.2-RV5-2007 Interoperability Specification (IOS) for cdma2000?Access Network Interfaces ?Part 2 Features To be published as TIA-2001.2-E
• TIA PN 3-4545.3-RV5-2007 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces ?Part 3 Features To be published as TIA-2001.3-E
• TIA PN 3-4545.5-RV5-2007 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces ?Part 5 (A3 and A7 Interfaces) To be published as TIA-2001.5-E
• TIA PN 3-4545.6-RV5-2007 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces ?Part 6 (A8 and A9 Interfaces) To be published as TIA-2001.6-E
• TIA PN 3-4545.7-RV5-2007 Interoperability Specification (IOS) for cdma2000?Access Network Interfaces ?Part 7 (A10 and A11 Interfaces) To be published as TIA-2001.7-E
• TIA-2001-D-2007 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Parts 1-7
• TIA-2001.1-E-2010 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces - Part 1 Overview
• TIA-2001.3-E-2010 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces - Part 3 Features
• TIA-2001.2-E-2010 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces - Part 2 Transport
• TIA-2001.7-E-2014 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces-Part 7 (A10 and A11 Interfaces)
• TIA-2001.6-E-2010 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces-Part 6 (A8 and A9 Interfaces)
• TIA-2001.5-E-2010 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces-Part 5 (A3 and A7 Inerfaces)
• TIA-1134-2009 Interoperability Specification (IOS) for Ultra Mobile Broadband (UMB) Radio Access Network Interfaces
• TIA-2001.4-E-2010 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces - Part 4 (A1, A1p, A2, and A5 Interfaces)
• TIA-2001-C-1-2003 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Release C ?Addendum 1 Supplement to TIA-2001-C

Jiangsu Provincial Standard of the People's Republic of China, Contact plate operation

• DB3201/T 1122-2022 Layer hen immunization procedures

Professional Standard - Electron, Contact plate operation

• SJ 11237-2001 Uninterruptible power systems(UPS)-General and safety requirements for UPS used in operator access areas

Professional Standard - Railway, Contact plate operation

• TB/T 3273-2011 Mast erection vehicle for overhead contact system in electrification railway
• TB/T 2180-2006 Technical specification for electrified catenary inspection & Maintenance railway working car
• TB/T 3271-2011 Railway applications.Current collection systems.Technical criteria for the interaction between pantograph and overhead line(to achieve free access)

American Welding Society (AWS), Contact plate operation

• AWS WI CH 11-2000 Qualification of Welders and Welding Operators(Welding Inspection)
• AWS F4.1-1999 Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping

IT-UNI, Contact plate operation

• UNI 2503-1944
• UNI 11001-1962
• UNI 6743-1970
• UNI 6755-1970
• UNI EN ISO 25239-3:2020 Friction stir welding - Aluminium - Part 3: Qualification of welding operators
• UNI 1849-1941

Malaysia Standards, Contact plate operation

• MS 949-1984

Henan Provincial Standard of the People's Republic of China, Contact plate operation

• DB41/T 1008-2015 Operation technical rules for pear high grafting and replanting
• DB4109/T 050-2023
• DB41/T 901-2014 Evaluation rules for surfacing welding operators of valve sealing surface
• DB41/T 901-2022 Evaluation rules for surfacing welding operators of valve sealing surface

Professional Standard - Agriculture, Contact plate operation

• DBN6528/T 133-2016 Code of practice for grazing sheep, lambing and rearing

GOSTR, Contact plate operation

• GOST R 58443-2019 Certification of operators of contact butt flash welding process and welders of thermite welding of railway rails. General requirements
• GOST ISO 25239-3-2020 Friction stir welding. Aluminium. Part 3. Qualification of welding operators

TIA - Telecommunications Industry Association, Contact plate operation

• TIA/EIA/IS-2001-A-2001 Interoperability Specifications (IOS) for cdma2000 Access Network Interfaces
• TIA/EIA/IS-2001-2000 Interoperability Specification (IOS) For cdma2000 Access Network Interfaces
• TIA-1036-B-2011 Interoperability Specification for cdma2000 Air Interface
• TIA-1167-B-2013 Interoperability Specification (IOS) for Femtocell Access Points
• TIA-663-1997 Personal Communications Interface Interoperability Standard (PCI)
• TIA-1036-A-2007 Interoperability Test Specification for cdma2000 Air Interface
• TIA-1043-A-2009 Over the Air Interoperability Specification for cmdma2000 Air Interface
• TIA-2001-C SERIES-2003 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Release C
• TIA-1143-2010 Interoperability Specification (IOS) for High Rate Packet Data (HRPD) Radio Access Network Interfaces and Interworking with World Interoperability for Microwave Access (WiMAX)
• TIA-102.CACD-D-2018 Project 25 Inter-RF Subsystem Interface Interoperability Test Procedures for Trunked Voice Operation Involving the ISSI
• TSB-149-2004 Generic Workmanship Guidelines for Fiber Optic Connector Interoperability
• TIA-2001.2-D-2007 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces - Part 2 Transport
• TIA-2001.1-D-2010 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces – Part 1 Overview
• TIA/EIA/IS-2001.2-B-2011 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces- Part 1 Overview
• TIA-2001.3-D-2007 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces - Part 3 Features
• TIA-2001.5-D-2007 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces – Part 5 (A3 and A7 Interfaces)
• TIA-2001.7-D-2007 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces – Part 7 (A10 and A11 Interfaces)
• TIA-2001.6-D-2007 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces - Part 6 (A8 and A9 Interfaces)
• TIA-1167-A-1-2012 Interoperability Specification (IOS) for Femtocell Access Points (Addendum to TIA-1167-A)
• TIA-2001.4-D-2007 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces - Part 4 (A1@ A1p@ A2@ and A5 Interfaces)
• TIA/EIA/IS-2001.6-B-2002 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Release B Part 6: (A8 and A9 Interfaces)
• TIA/EIA/IS-2001.5-B-2002 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Release B Part 5: (A3 and A7 Interfaces)
• TIA/EIA/IS-2001.7-B-2002 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Release B Part 7: (A10 and A11 Interfaces)
• TSB102.BAAD-1994 APCO Project 25 Common Air Interface Operational Description for Conventional Channels
• TIA/EIA/IS-2001.3-B-2002 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Release B Part 3: Features
• TIA/EIA/IS-2001.1-B-2002 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Release B Part 1: Overview
• TIA/EIA/IS-2001.2-B-2002 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Release B Part 2: Transport
• TIA/EIA/IS-2001.4-B-2002 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Release B Part 4: (A1@ A2@ and A5 Interfaces)
• TIA-2001-D-1-2010 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces (Includes Access to Additional Content)

Indonesia Standards, Contact plate operation

• SNI 04-6186.23-2002 Electrical relays. Part 23: Contact performance
• SNI 04-2654-1992 Safety requirement for the operation of television receivers

Occupational Health Standard of the People's Republic of China, Contact plate operation

• GBZ 2-2002 Occupational Exposure Limit for Hazardous Agents in the Workplace
• GBZ 2.2-2007 Occupational exposure limits for hazardous agents in the workplace part 2:physical agents

CL-INN, Contact plate operation

• INDITECNOR 34-80

Professional Standard - Traffic, Contact plate operation

• JT/T 1196-2018 Requirements for handing over of mail item air transport

Society of Automotive Engineers (SAE), Contact plate operation

• SAE J1611-2009 Operator Controls Horizontal Earthboring Machines

Professional Standard - Aerospace, Contact plate operation

• QJ 1934-1990 Microprocessor Operating System Interface Specification

邢台市市场监督管理局, Contact plate operation

• DB1305/T 13-2021 Technical regulations for optimal operation of high-quality chestnut replacement

Professional Standard - Archives, Contact plate operation

• DA/T 93-2022 Operating procedures for electronic file transfer and reception

交通运输部, Contact plate operation

• JT/T 1197-2018 Express Civil Aviation Transport Handover Operation Requirements
• JT/T 1387-2021 Mail express rail transport handover operation requirements

Taiwan Provincial Standard of the People's Republic of China, Contact plate operation

• CNS 7588-1981 Remote Control Gear with Transmission Tubing for Manual Operation Deck Operating Devices, Welding - in Type
• CNS 7585-1981 Remote Control Gear with Transmission Tubing for Manual Operation Lengthening for Spindles of Armatures
• CNS 7589-1981 Remote Control Gear with Transmission Tubing for Manual Operation Deck Operating Devices with Slewable Crown Gear Unit, Welding - in Type
• CNS 14843-1-2004 Uninterruptible power systems (UPS)－Part 1 : General and safety requirements for UPS used in operator access areas
• CNS 14843.1-2004 Uninterruptible power systems (UPS)－Part 1 : General and safety requirements for UPS used in operator access areas

ES-UNE, Contact plate operation

• UNE-EN 2349-304:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 304: Operate and release time (Endorsed by AENOR in March of 2007.)
• ISO/DIS 14732:2023 Welding personnel — Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials

European Association of Aerospace Industries, Contact plate operation

• AECMA PREN 4626-101-2006 Aerospace series Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 101: Optical contract (sub-assembly) for
• AECMA PREN 4626-201-2006 Aerospace series Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 201: Optical contract (sub-assembly) for
• AECMA PREN 4626-202-2006 Aerospace series Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 202: Optical contract (sub-assembly) for
• AECMA PREN 3372-002-2005 Aerospace Series Connectors, Electrical, Circular, Medium and High Contact Density, Scoop-Proof with Bayonet Coupling, Operating Temperatures - 65 Degrees C to 175 Degrees C and 200 Degrees C Continuous Part 002: Specification of Performance and Contact
• AECMA PREN 4639-101-2006 Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 101 : Optical contact for cable EN 4641-100 Operating temperatures between ?65 degrees C and 125 degrees C Produc
• AECMA PREN 4639-102-2006 Aerospace series Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Part 102 : Optical contact for cable EN 4641-102 Operating temperatures between ?55 degrees C and 100 degrees C Produc
• AECMA PREN 6047-002-1995 Aerospace Series Connectors, Electrical, Circular, Coupled by Threaded Ring, for High Current Operating Temperature + 200 Degrees Celsius Continuous, and Fire Resistant Part 002 - Specification of Performance and Contact Arrangements Edition P1
• AECMA PREN 3545-004-2004 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts - Product Standard Edition P 3
• AECMA PREN 3545-004-2002 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts Product Standard Edition P 2
• AECMA PREN 3545-004-1995 Aerospace Series Connectors, Electrical, Rectangular, with Sealed and Non-Sealed Rear, Plastic Housing, Locking Device, Operating Temperatures - 55 Degrees C to 175 Degrees C Part 004 : Connectors with Male Contacts Product Standard Edition P 1
• AECMA PREN 4626-001-2006 Aerospace series Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 001: Technical specification Edition P 1
• AECMA PREN 4626-002-2006 Aerospace series Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 002: Specification of performance and co
• AECMA PREN 6047-002-2001 Aerospace Series Connectors, Electrical, Circular, Coupled by Threaded Ring, for High Current Operating Temperature + 200 Degrees Celsius Continuous, and Fire Resistant Part 002: Specification of Performance and Contact Arrangements Edition P 2
• AECMA PREN 4626-003-2006 Aerospace series Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 003: Adaptor for plug Edition P 1
• AECMA PREN 4626-004-2006 Aerospace series Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule Operating temperatures - 65 Degrees C to 125 Degrees C (cable dependent) Flush contacts Part 004: Adaptor for receptacle Edition P 1
• AECMA PREN 3476-002-2001 Aerospace Series Connectors, Electrical, Circular, Bayonet Coupling, Operating Temperature 175 Degrees C or 200 Degrees C Continuous Part 002: Specification of Performance and Contact Arrangements Edition P 1

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Contact plate operation

• IEEE 855-1990 Standard for Microprocessor Operating System Interfaces (MOSI)
• IEEE 1003.1C INT 48-1998 Information Technology— Portable Operating System Interface (POSIX)
• IEEE 1609.4-2016 Wireless Access in Vehicular Environments (WAVE)-Multi-Channel Operation
• IEEE 1609.4-2010 Wireless Access in Vehicular Environments (WAVE)-Multi-channel Operation
• IEEE 802.11D INT-2005 IEEE Recommended Practice for Multi-Vendor Access Point Interoperability via an Inter-Access Point Protocol Across Distribution Systems Supporting IEEE 802.11? Operation

FI-SFS, Contact plate operation

• SFS 2223-1976
• SFS 5232-1986

Institute of Electrical and Electronics Engineers (IEEE), Contact plate operation

• IEEE 2941.1-2022 IEEE Standard for Operator Interfaces of Artificial Intelligence
• IEEE Std 2941.1-2022 IEEE Standard for Operator Interfaces of Artificial Intelligence
• IEEE Std 855-1990 IEEE Standard for Microprocessor Operating System Interfaces (MOSI)
• IEEE 1100-2005 Recommended Practice for Powering and Grounding Electronic Equipment IEEE Emerald Book (Color Book Series)
• IEEE P2941.1/D2, June 2022 IEEE Draft Standard for Operator Interfaces of Artificial Intelligence
• IEEE Std 802.11F-2003 IEEE Trial-Use Recommended Practice for Multi-Vendor Access Point Interoperability Via an Inter-Access Point Protocol Across Distribution Systems Supporting IEEE 802.11 Operation
• IEEE Std 1609.4-2010 IEEE Standard for Wireless Access in Vehicular Environments (WAVE)--Multi-channel Operation
• IEEE P802.11F/D6:2003 (Draft)Draft Recommended Practice for Multi-Vendor Access Point Interoperability Via an Inter-Access Point Protocol Across Distribution Systems Supporting IEEE 802.11 Operation
• IEEE Std 1003.1-2001 IEEE Standard for IEEE Information Technology - Portable Operating System Interface (POSIX(TM))
• IEEE Std 1003.1-2008 IEEE Standard for Information Technology - Portable Operating System Interface (POSIX(R))
• IEEE Std 1609.4-2016 IEEE Standard for Wireless Access in Vehicular Environments (WAVE) -- Multi-Channel Operation - Redline
• IEEE 142/COR-2014 Recommended Practice for Grounding of Industrial and Commercial Power Systems
• IEEE 1003.1/COR 2-2004 Information technology - Portable Operating System Interface (POSIX); Technical Corrigendum 2
• IEEE 1609.4/D8.0, June 2010 IEEE Draft Standard for Wireless Access in Vehicular Environments (WAVE) - Multi-Channel Operation
• IEEE P1609.4/D9, August 2010 IEEE Draft Standard for Wireless Access in Vehicular Environments (WAVE) - Multi-Channel Operation
• IEEE Unapproved Draft Std P1609.4/D6.0, Mar 2010 IEEE Draft Standard for Wireless Access in Vehicular Environments (WAVE) - Multi-Channel Operation
• IEEE Std 1609.4-2006 IEEE Trial-Use Standard for Wireless Access in Vehicular Environments (WAVE) - Multi-Channel Operation
• IEEE Std P1003.1/D2 IEEE Draft Standard for Information Technology Portable Operating System Interface (POSIX?)
• IEEE Std P802.11F/D6 Draft IEEE Recommended Practice for Multi-Vendor Access Point Interoperability Via an Inter-Access Point Protocol Across Distribution Systems Supporting IEEE 802.11 Operation (Superseded by 802.11F-2003)
• IEEE 1003.1-2008 Information technology - Portable Operating System Interface (POSIX) - Base Specifications, Issue 7
• IEEE Std 1003.1-1988/INT 1-1992 IEEE Standard Portable Operating System Interface for Computer Environments
• IEEE P1609.4/D3, September 2015 IEEE Draft Standard for Wireless Access in Vehicular Environments - Multi-Channel Operation
• IEEE P1609.4/D4, October 2015 IEEE Draft Standard for Wireless Access in Vehicular Environments - Multi-Channel Operation

Shandong Provincial Standard of the People's Republic of China, Contact plate operation

• DB3707/T 080-2023 Dairy cow midwifery and postpartum operating procedures

Standard Association of Australia （SAA）, Contact plate operation

• AS 3985.1:1991 Manipulating industrial robots - Mechanical interfaces - Circular (form A)
• AS/NZS 3957:2014
• AS 2428.4:2004 Methods of testing smoke/heat release vents - Determination of the effect of flame contact
• AS/NZS 4161:1994 Information processing - Data communication - DTE/DCE interface back-up control operation using the 25-pole connector

Electronic Components, Assemblies and Materials Association, Contact plate operation

• ECA SP 5107-A-1-2007 Test Methology for Assessing the Performance of Compliant Contact Terminations Used as Free Standing Contacts or in Electrical Connections and Sockets To be published as ANSI/EIA/ECA-364-1002
• ECA SP 5107-A-2-2007 Test Methology for Assessing the Performance of Compliant Contact Terminations Used as Free Standing Contacts or in Electrical Connections and Sockets To be published as ANSI/EIA/ECA-364-1002
• ECA EIA-364-1002A-2015 TS-1002A Test Methodology for Assessing the performance of Compliant Contact Terminations used as Free Standing Contacts or in Electrical Connectors and Sockets

Military Standard of the People's Republic of China-General Armament Department, Contact plate operation

• GJB 7036-2010 Operating system interface of software communications architecture
• GJB 7721-2012 Application programming interface to military desktop\server operating system
• GJB 7723-2012 Hardware programming interface to military desktop\server operating system

ECMA - European Association for Standardizing Information and Communication Systems, Contact plate operation

• TR 31-1985 Remote Operations - Concepts@ Notation and Connection-Oriented Mappings

Association of German Mechanical Engineers, Contact plate operation

• DVS 1184-2002
• DVS 1184-2001
• DVS 2706-1979 Internal training of operating staff for electron-beam welding machines
• DVS 1901-2-2007
• DVS 1901-2-2008
• VDI 2262 Blatt 1-1993 Workplace air; reduction of exposure to air pollutants; general requirements
• DVS 1905-1-2009
• DVS 1905-1-1995
• DVS 1902-1-2001
• DVS 1902-1-1996
• DVS 1905-1-2010
• DVS 1902-1-1987
• VDI 2262 Blatt 4-2006 Workplace air - Reduction of exposure to air pollutants - Capture of air pollutants
• DVS 0716-1997
• DVS 2502-1981

U.S. Military Regulations and Norms, Contact plate operation

• ARMY MIL-C-63371/3 B VALID NOTICE 2-2013 Circuit Card Assembly, 9291224 (Operator Control Box Interface)

Professional Standard - Special Equipment Specification, Contact plate operation

• TSG Z6002-2010 Detailed Rules for Examination of Special Equipment Welding Operators

ETSI - European Telecommunications Standards Institute, Contact plate operation

• ETSI EN 300 396-10:2000 Terrestrial Trunked Radio (TETRA); Technical Requirements for Direct Mode Operation (DMO); Part 10: Managed Direct Mode Operation (M-DMO) (V1.1.1)
• ETSI EN 300 396-10:2002 Terrestrial Trunked Radio (TETRA); Technical Requirements for Direct Mode Operation (DMO); Part 10: Managed Direct Mode Operation (M-DMO) (V1.1.1)
• TS 100 396-10-2000 Terrestrial Trunked Radio (TETRA); Technical Requirements for Direct Mode Operation (DMO); Part 10: Managed Direct Mode Operation (M-DMO) (V1.1.1)
• ETR 240-1996 Transmission and Multiplexing (TM); Optical Access Networks (OANS); Operations and Maintenance (OAM) of OANs

International Electrotechnical Commission (IEC), Contact plate operation

• ISO/IEC 7816-12:2005/Cor 1:2014 Identification cards - Integrated circuit cards - Part 12: Cards with contacts - USB electrical interface and operating procedures; Technical Corrigendum 1

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Contact plate operation

• PREN 2349-304-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 304: Operate and Release Time (Edition P 1)

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Contact plate operation

• CEPT T/CS 68-06-1986 Fonctions D?Exploitation Et De Maintenance Pour Commutateurs De Transit Numeriques
• CEPT T/L 02-11 E-1987 Interfaces for Operation@ Maintenance and Supervision of Telecommunications Equipment in Telecommunications Centres
• CEPT T/L 02-11-1987 Interface Pour L?Exploitations La Maintenance Et La Surveillance Des Equipements De Telecommunications Dans Les Centres De Telecommunications

European Committee for Standardization (CEN), Contact plate operation

• EN 1418:1997 Welding Personnel - Approval Testing of Welding Operators for Fusion Welding and Resistance Weld Setters for Fully Mechanized and Automatic Welding of Metallic Materials
• EN 4639-102:2007 Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 102: Optical contact for cable EN 4641-102 - Operating temperatures between -55 °C and 100 °C - Product standa
• EN 50010:1987 Low voltage switchgear and controlgear for industrial use; Inductive proximity switches : Methods for measuring the operating distance and operating frequency
• EN ISO 15187:2002 Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (GUI-R) ISO 15187:2000
• EN ISO 9409-1:1996 Manipulating Industrial Robots - Mechanical Interfaces - Part 1: Plates (Form A) Supersedes EN 29409-1:1992; ISO 9409-1:1996
• EN ISO 9409-2:1996 Manipulating Industrial Robots - Mechanical Interfaces - Part 2: Shafts (Form A) ISO 9409-2:1996
• EN ISO 25239-3:2020 Friction stir welding - Aluminium - Part 3: Qualification of welding operators (ISO 25239-3:2020)
• EN ISO 25239-3:2011 Friction stir welding - Aluminium - Part 3: Qualification of welding operators (ISO 25239-3:2011)

ESDU - Engineering Sciences Data Unit, Contact plate operation

• ESDU 84017-1984 CONTACT PHENOMENA II: STRESS FIELDS AND FAILURE CRITERIA IN CONCENTRATED ELASTIC CONTACTS UNDER COMBINED NORMAL AND TANGENTIAL LOADING
• ESDU 84017 A-2007 Contact phenomena. II: stress fields and failure criteria in concentrated elastic contacts under combined normal and tangential loading.
• ESDU 85007 C-1994 Contact phenomena. III: calculation of individual stress components in concentrated elastic contacts under combined normal and tangential loading.

European Telecommunications Standards Institute (ETSI), Contact plate operation

• ETSI GS OEU 002-2015 Operational energy Efficiency for Users (OEU); Energy Consumption Measurement of Operational Technical Equipment of Copper and Optical Fixed Access (V1.1.1)
• ETSI TS 100 396-10-2000 Terrestrial Trunked Radio (TETRA); Technical Requirements for Direct Mode Operation (DMO); Part 10: Managed Direct Mode Operation (M-DMO) (V1.1.1)

Professional Standard - Commodity Inspection, Contact plate operation

• SN/T 1559.1-2005 Protocol of direct immunofluorescent assay for African swine fever
• SN/T 1559.2-2005 Protocol of indirect immunofluorescent assay for African swine fever
• SN/T 1395.3-2005 Protocol of indirect complement fixation test for avian chlamydiosis
• SN/T 1699.2-2006 Protocol of direct immunofluorescent test for porcine epidemic diarrhea

JP-WES, Contact plate operation

• WES 8111-2007 Certification procedure for robot welding operators of building structures

Professional Standard - Electricity, Contact plate operation

• DL/T 816-2017 Evaluation rules for welding operation skills teachers in the electric power industry
• DL/T 816-2003 Examination code for welding instructor qualification of electric power industry

American Petroleum Institute (API), Contact plate operation

• API RP 17H-2013(2014) Remotely Operated Vehicle (ROV) Interfaces on Subsea Production Systems
• API RP 17H-2019(2021) Remotely Operated Vehicle (ROV) Interfaces on Subsea Production Systems

Alliance of Telecommunications Industry Solutions （ATIS), Contact plate operation

• ATIS 0800054-2013 DRM APPLICATION LEVEL INTERFACES INTEROPERABILITY DRM Application Level Interfaces Interoperability Specification - Client-Side APIs (Includes Access to Additional Content)
• ATIS 0300240-2014 Operations, Administration, Maintenance, and Provisioning (OAM&P) - Generic Network Information Model for Interfaces Between Operations Systems and Network Elements

ATIS - Alliance for Telecommunications Industry Solutions, Contact plate operation

• 0800054-2013 DRM APPLICATION LEVEL INTERFACES INTEROPERABILITY DRM Application Level Interfaces Interoperability Specification - Client-Side APIs (Includes Access to Additional Content)
• 0800039-2010 DRM Server-Side Application Programming Interfaces Interoperability Specification

AWS - American Welding Society, Contact plate operation

• F4.1-1994 Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping
• F4.1-1999 Recommended Safe Practices for the Preparation for Welding and Cutting of Containers and Piping
• FORM N-4- Welder@ Welding Operator@ or Tack Welder Qualification Test Record
• C7.4/C7.4M-2008 Process Specification and Operator Qualification for Laser Beam Welding (First Edition)

Japanese Industrial Standards Committee (JISC), Contact plate operation

• JIS B 8441:2005 Manipulating industrial robots -- Mechanical interfaces -- Part 2: Shafts
• JIS B 8436:2005 Manipulating industrial robots -- Mechanical interfaces -- Part 1: Plates
• JIS B 8436:1996 Manipulating industrial robots -- Mechanical interfaces -- Part 1: Plates (form A)
• JIS B 8441:1996 Manipulating industrial robots -- Mechanical interfaces -- Part 2: Shafts (form A)

Anhui Provincial Standard of the People's Republic of China, Contact plate operation

• DB34/T 974-2009 Technical regulations for industrial grafting and seedling cultivation of watermelon and melon

Professional Standard-Safe Production, Contact plate operation

• AQ 4202-2008 Administrative standard for personal exposure concentration of respirable coal dust in the air of workplace
• AQ 4203-2008 Administrative standards for personal exposure concentration of respirable rock dust in the air of workplace

AREMA - American Railway Engineering and Maintenance-of-Way Association, Contact plate operation

• CHAPTER 33/PART 8-2001 Catenary and Locomotive Interaction (Volume 3/Infrastructure and Passenger)
• CHAPTER 33/PART 8-2000 Catenary and Locomotive Interaction (Volume 3/Infrastructure and Passenger)
• CHAPTER 33/PART 8-1986 Catenary and Locomotive Interaction (Volume 3/Infrastructure and Passenger)

Professional Standard - Labor and Labor Safety, Contact plate operation

• LD 39-1992 Management standards for exposure concentration of respirable coal dust in air in workplaces
• LD 41-1992 Management standards for exposure concentration of respirable rock dust in the air of workplaces

Defense Logistics Agency, Contact plate operation

• DLA A-A-51159 B VALID NOTICE 2-2013 Crimping and Beading Machines, Sheet Metal, Manually Operated, Rotary Type, Deep Throat Style

US-FCR, Contact plate operation

• FCR AF M85-21 IMC 85-1-1985 OPERATION AND MAINTENANCE OF CROSS-CONNECTION CONTROL AND BACKFLOW PREVENTION SYSTEMS
• FCR AF M85-21 IMC 83-3-1983 OPERATION AND MAINTENANCE OF CROSS-CONNECTION CONTROL AND BACKFLOW PREVENTION SYSTEMS
• FCR AF M85-21 IMC 83-1-1983 OPERATION AND MAINTENANCE OF CROSS-CONNECTION CONTROL AND BACKFLOW PREVENTION SYSTEMS
• FCR AF M85-21 IMC 83-2-1983 OPERATION AND MAINTENANCE OF CROSS-CONNECTION CONTROL AND BACKFLOW PREVENTION SYSTEMS

Yunnan Provincial Standard of the People's Republic of China, Contact plate operation

• DB53/T 552-2014 Grade assessment of training institutions for special equipment welding operators

国家广播电视总局, Contact plate operation

• GY/T 303.4-2018 Smart TV Operating System Part 4: Hardware Abstraction Interface
• GY/T 303.5-2018 Smart TV Operating System Part 5: Functional Component Interface

IX-UIC, Contact plate operation

• UIC CODE 791-3 R-2011 Safety Measures to be Adopted When Working on or Nearby Overhead Contact Lines

HU-MSZT, Contact plate operation

• MNOSZ 4849-1952

European Committee for Electrotechnical Standardization（CENELEC）, Contact plate operation

• EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
• EN 50518-3:2011 Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation
• EN 50518-3:2013 Monitoring and alarm receiving centre - Part 3: Procedures and requirements for operation

CENELEC - European Committee for Electrotechnical Standardization, Contact plate operation

• EN 61310-1:1995 Safety of Machinery Indication@ Marking and Actuation Part 1: Requirements for Visual@ Auditory and Tactile Signals

PT-IPQ, Contact plate operation

• NP EN 1599-2000 Welding consumables Covered electrodes for manual metal arc welding of creep-resisting steels Classification

Association for Information and Image Management (AIIM), Contact plate operation

• AIIM MS18-1992 Micrographics - Splices for Imaged Microfilm - Dimensions and Operational Constraints

Professional Standard - Petroleum, Contact plate operation

• SY/T 5921-2011 Code of practice for operating, maintenance and repair of vertical cylindrical welded steel oil tanks

API - American Petroleum Institute, Contact plate operation

• API RP 17H-2019 Remotely Operated Tools and Interfaces on Subsea Production Systems (THIRD EDITION)

SG-SPRING SG, Contact plate operation

• TR 29 AMD 1-2012 Technical reference for national authentication framework - Authentication operator interface messages

工业和信息化部, Contact plate operation

• YD/T 3445-2019 Internet Access Service Information Security Management System Operation Guide
• YD/T 3099-2016 Interoperable air interface technical requirements between cdma2000 circuit domain and E-UTRAN

国家能源局, Contact plate operation

• SY/T 5921-2017 Specifications for operation, maintenance and repair of vertical cylindrical steel welded oil tanks

(U.S.) Plastic Pipe Association, Contact plate operation

• PPI TN-42-2013 Recommended Minimum Training Guidelines for PE Pipe Butt Fusion Joining Operators for Municipal and Industrial Projects

American Water Works Association (AWWA), Contact plate operation

• AWWA M14-2004 Recommended Practice for Backflow Prevention and Cross-Connection Control Third Edition

国家市场监督管理总局、中国国家标准化管理委员会, Contact plate operation

• GB/T 37743-2019 Information technology—Identification service interfaces of operating system in intelligent device

IETF - Internet Engineering Task Force, Contact plate operation

• RFC 6619-2012 Scalable Operation of Address Translators with Per-Interface Bindings

Others:   contact disc contact time, surface contact disc, contact plate method, glass contact dish, contact plate area, surface contact disc, floor contact dish, Contact plate operating procedures, Contact plate operating procedures, contact plate sampling, contact disc contact time, contact plate preparation, Configure Contact Disc, contact disc english, contact plate size, Contact Disc Requirements, contact plate inspection, contact plate method, Contact plate operation, Contact Disc Contact Method.