ZH
RU
ES

active source multiples

active source multiples, Total:45 items.

In the international standard classification, active source multiples involves: Air quality, Railway rolling stock, Metrology and measurement in general, Components and accessories for telecommunications equipment, Energy and heat transfer engineering in general, Quality, Protection of and in buildings, Installations in buildings, Electrical engineering in general, Power transmission and distribution networks, Radiation measurements, Elements of buildings, Acoustics and acoustic measurements, Geology. Meteorology. Hydrology, Mining equipment.

British Standards Institution (BSI), active source multiples

BS EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Automated measuring systems
BS EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
BS EN 13284-1:2002 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
BS EN IEC 62037-7:2022 Passive RF and microwave devices, intermodulation level measurement - Field measurements of passive intermodulation
BS PAS 2031:2017 Certification of energy efficiency measure (EEM) installation in existing buildings
20/30405209 DC BS EN IEC 62037-7. Passive RF and microwave devices, intermodulation level measurement. Part 7. Field measurements of passive intermodulation
BS EN ISO 3747:2010 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment

European Committee for Standardization (CEN), active source multiples

EN 15654-1:2018 Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1: On-track measurement sites for vehicles in service
EN ISO 3747:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
EN 15316-1:2017 Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression@ Module M3-1@ M3-4@ M3-9@ M8-1@ M8-4

German Institute for Standardization, active source multiples

DIN EN 15654-1/A1:2021 Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1: On-track measurement sites for vehicles in service; German and English version EN 15654-1:2018/prA1:2021
DIN EN 15654-1:2018 Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1: On-track measurement sites for vehicles in service

Association Francaise de Normalisation, active source multiples

NF F01-654-1*NF EN 15654-1:2018 Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 1 : on-track measurement sites for vehicles in service
NF X43-333-2*NF EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : quality assurance of automated measuring systems
NF X43-310:1991 Air quality - Stationary sources - Assesment of automated measuring methods characteristics of sulfur dioxide on site
NF EN 61300-3-19:1997 Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 3-19 : examens et mesures. Influence de la polarisation sur la puissance réfléchie d'un composant à fibres optiques mo...

Beijing Provincial Standard of the People's Republic of China, active source multiples

DB11/T 1408-2017 Guidelines for on-site evaluation of energy measuring instruments for energy-consuming units

International Commission on Illumination (CIE), active source multiples

CIE 13.3-1995 Method of Measuring and Specifying Colour Rendering Properties of Light Sources (E)

International Electrotechnical Commission (IEC), active source multiples

IEC 62037-7:2022 Passive RF and microwave devices, intermodulation level measurement - Part 7: Field measurements of passive intermodulation

European Committee for Electrotechnical Standardization（CENELEC）, active source multiples

EN IEC 62037-7:2022 Passive rf and microwave devices, intermodulation level measurement - Part 7: Field measurements of passive intermodulation

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), active source multiples

ASHRAE AN-04-4-3-2004 Measurement of Pore Size Variation and Its Effect on Energy Wheel Performance

AT-OVE/ON, active source multiples

OVE EN IEC 62037-7:2021 Passive RF and Microwave devices, intermodulation level measurement - Part 7: Field measurements of passive intermodulation (IEC 46/827/CDV) (english version)

RU-GOST R, active source multiples

GOST R EN 15259-2015 Air quality. Measurement of stationary source emissions. Requirements for measurement sections and sites and for the measurement objective, plan and report
GOST R ISO 3747-2013 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering/survey methods for use in situ in a reverberant environment
GOST R ISO 3743-1-2013 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for small movable sources in reverberant fields. Part 1. Comparison method for a hard-wall test room

Professional Standard - Electricity, active source multiples

DL/T 1790-2017 General specification for power supply unit for partial discharge measurement of transformers

American Society for Testing and Materials (ASTM), active source multiples

ASTM E1893-08a Standard Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments to Support Unrestricted Release from Further Regulatory Controls
ASTM E1249-15 Standard Practice for Minimizing Dosimetry Errors in Radiation Hardness Testing of Silicon Electronic Devices Using Co-60 Sources
ASTM D6391-99 Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
ASTM D6391-99(2004) Standard Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole

API - American Petroleum Institute, active source multiples

API PUBL 316-1995 Identifying and Measuring Nonuse Values for Natural and Environmental Resources a Critical Review of the State of the Art

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., active source multiples

ASHRAE LO-09-094-2009 Achieving Energy Efficiency and Improving Indoor Air Quality in Army Maintenance Facilities
ASHRAE 4783-2005 2001 Seattle Energy Code: Striving for 20% Total Building Energy Savings Compared to Standard 90.1-1999

Korean Agency for Technology and Standards (KATS), active source multiples

KS F 2810-1-2001 Field measurements of impact sound insulation of floors-Part 1:Method using standard light impact source
KS F 2810-2-2012 Field measurements of floor impact sound insulation of buildings-Part 2:Method using standard heavy impact sources
KS F 2810-1-2015(2020) Field measurements of impact sound insulation of floors－Part 1：Method using standard light impact source
KS F 2810-2-2012(2017) Field measurements of floor impact sound insulation of buildings－Part 2：Method using standard heavy impact sources
KS F 2810-2-2001 Field measurements of floor impact sound insulation of buildings－Part 2：Method using standard heavy impact sources
KS F 2810-2-2012(2022) Field measurements of floor impact sound insulation of buildings－Part 2：Method using standard heavy impact sources
KS I ISO 3747:2022 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment
KS I ISO 3747:2016 Acoustics－Determination of sound power levels of noise sources－Comparison method in situ

Professional Standard - Commodity Inspection, active source multiples

SN/T 1970-2007 Determination of dexamethasone, betamdhasone, triameinolone and flumethasone residues in foodstuffs of animal origin for import and export.Enzyme-linked immunosorbent assay

American National Standards Institute （ANSI), active source multiples

ANSI/ASA S12.57-2011 Acoustics - Determination of Sound Power Levels and Sound Energy Levels of Noise Sources Using Sound Pressure - Engineering/Survey Methods for Use in situ in a reverberant environment
ANSI/ISO 3747:2010 Acoustics - Determination of Sound Power Levels and Sound Energy Levels of Noise Sources Using Sound Pressure - Engineering/Survey Methods for Use in situ in a reverberant environment

KR-KS, active source multiples

KS I ISO 3747-2022 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering/survey methods for use in situ in a reverberant environment