ZH
RU
ES
Seal test
Seal test, Total:87 items.
In the international standard classification, Seal test involves: Electromechanical components for electronic and telecommunications equipment, Fluid power systems, Plastics, Radiation protection, Pipeline components and pipelines, Environmental testing, Biology. Botany. Zoology, Microbiology, Materials for aerospace construction, Road engineering, Construction materials, Packaging and distribution of goods in general.
未注明发布机构, Seal test
GM North America, Seal test
FI-SFS, Seal test
(U.S.) Ford Automotive Standards, Seal test
Society of Automotive Engineers (SAE), Seal test
YU-JUS, Seal test
- JUS N.A5.866-1984 Basic environmental testing procedures. Survey of sealing tests. Q tests
- JUS N.A5.865-1985 Basic environmentai testing procedures. Test Ql - Sealing Bomb pressure test
AENOR, Seal test
- UNE 20261:1993 SEALING TEST FOR PRESSURIZED WAVEGUIDE TUBING AND ASSEMBLIES.
- UNE-EN 60512-14-6:2007 Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006).
- UNE-EN 60512-14-2:2007 Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006).
- UNE-EN 60512-14-4:2007 Connectors for electronic equipment - Tests and measurements -- Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006).
- UNE-EN 60512-14-5:2007 Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006).
- UNE-EN 60512-14-7:1999 ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT - BASIC TESTING PROCEDURES AND MEASURING METHODS. PART 14: SEALING TESTS. SECTION 7: TEST 14G: IMPACTING WATER
- UNE-EN 12298:1998 Biotechnology - Equipment - Guidance on testing procedures for leaktightness
Association Francaise de Normalisation, Seal test
- NF EN 60512-14-2:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 14-2 : essais d'étanchéité - Essai 14b : étanchéité - Micro-fuite d'air
- NF EN 60512-14-6:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 14-6 : essais d'étanchéité - Essai 14f : étanchéité interfaciale
- NF R80-101:1980 Plastiques - Essai de tenue sous serrage - Méthode à la clé dynamométrique.
- NF EN 14187-9:2019 Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 9 : test de fonctionnalités des mastics pour joints
- NF X42-122*NF EN 12298:1998 Equipment. Guidance on testing procedures for leaktightness.
- NF P85-500*NF ISO 13640:2019 Buildings and civil engineering works - Sealants - Specifications for test substrates
Danish Standards Foundation, Seal test
- DS/EN 60512-14-6:2006 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
- DS/EN 60512-14-2:2006 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
- DS/EN 60512-14-7:1998 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 14: Sealing tests - Section 7: Test 14g: Impacting water
- DS/EN 12298:1998 Biotechnology - Equipment - Guidance on testing procedures for leak tightness
German Institute for Standardization, Seal test
- DIN EN 60512-14-6:2006-11 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006); German version EN 60512-14-6:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this standard unt...
- DIN EN 60512-14-2:2006-11 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006); German version EN 60512-14-2:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this stand...
- DIN EN 60512-14-4:2006-11 Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006); German version EN 60512-14-4:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this standard ...
- DIN EN 60512-14-5:2006-11 Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006); German version EN 60512-14-5:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this st...
- DIN EN 12298:1998-05 Biotechnology - Equipment - Guidance on procedures for testing leaktightness; German version EN 12298:1998
CZ-CSN, Seal test
- CSN 11 9530-1989 Unified system of hydraulic components. General enrineering. Filter elements. Sealing test
Lithuanian Standards Office , Seal test
- LST EN 60512-14-6-2006 Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006)
- LST EN 60512-14-2-2006 Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006)
- LST EN 60512-14-4-2006 Connectors for electronic equipment - Tests and measurements -- Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006)
- LST EN 60512-14-5-2006 Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006)
- LST EN 12298-2000 Biotechnology - Equipment - Guidance on testing procedures for leaktightness
- LST EN 60512-14-7-2001 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 14: Sealing tests. Section 7: Test 14g: Impacting water (IEC 60512-14-7:1997)
ECIA - Electronic Components Industry Association, Seal test
- 186-14E-1985 Passive Electronic Component Parts@ Test Method for; Method 14: Panel Seal Test
PT-IPQ, Seal test
Electronic Industrial Alliance (U.S.), Seal test
- EIA-186-14E-1985 STANDARD TEST METHOD FOR PASSIVE ELECTRONIC COMPONENT PARTS METHOD 14: PANEL SEAL TEST
GB-REG, Seal test
British Standards Institution (BSI), Seal test
- BS EN 60512-14-7:1998 Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Sealing tests. Test 14g. Impacting water
- BS EN 14187-9:2019 Tracked Changes. Cold applied joint sealants. Test methods. Function testing of joint sealants
- BS EN IEC 60068-2-17:2023 Environmental testing - Tests. Test Q: Sealing
- 14/30309926 DC BS EN 14187-9. Cold applied joint sealants. Test methods. Part 9. Function testing of joint sealants
- 22/30423707 DC BS ISO 5119. Low Temperature Sealing Capability of Elastomeric Seals. Test Methods
GM Daewoo, Seal test
IN-BIS, Seal test
JP-JEM, Seal test
- JEM TR 152-2008 A guide to testing methods of mechanical seal of class1 pumps and class2 pumps etc. for nuclear power plants
Korean Agency for Technology and Standards (KATS), Seal test
- KS C IEC 60512-7-2014(2019) Electromechanical components for electronic equipment — Basic testing procedures and measuring methods — Part 7: Mechanical operating tests and sealing tests
- KS M 7137-1995 Testing methods for sealed flexible packages
- KS M 7137-2016 Testing methods for sealed flexible packages
RO-ASRO, Seal test
- STAS SR ISO 9978:1996 Radiation protectlon - Sealed redioactive sources Leakage test methods
- STAS SR ISO 3503:1995 Assembled joints between fittings and polyethylene (PE) pressure pipes-Test of leakproofness under internai pressure when subjected to bending
- STAS 10811/3-1984 SEALED RADIOACTIVE SOURCES Test methods
US-FCR, Seal test
ES-UNE, Seal test
- UNE-EN 14187-9:2020 Cold applied joint sealants - Test methods - Part 9: Function testing of joint sealants
Japanese Industrial Standards Committee (JISC), Seal test
- JIS A 1439:2022 Testing methods of sealants for sealing and glazing in buildings
BR-ABNT, Seal test
European Committee for Standardization (CEN), Seal test
- EN ISO 13844:2022 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pipes - Test method for leaktightness under negative pressure, angular deflection and deformation (ISO 13844:2022)
- EN ISO 13845:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes - Test method for leaktightness under internal pressure and with angular deflection
- EN ISO 13844:2015 Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes - Test method for leaktightness under negative pressure@ angular deflection and deformation
PL-PKN, Seal test
- PN H04606-02-1990 Aluminium and aluminium alloys Test methods of anodic oxide coatings Test for degres of seal
SE-SIS, Seal test
- SIS SS 2989-1988 Door and window fittings — Movable bottom sealers for internal wood doorsets — Testing
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Seal test
- ASHRAE 3734-1993 Sealed-Tube Tests of Refrigerants from Field Systems Before and After Recycling
WRC - Welding Research Council, Seal test
- BULLETIN 339-1988 DEVELOPMENT OF TIGHTNESS TEST PROCEDURES FOR GASKETS IN ELEVATED TEMPERATURE SERVICE
- BULLETIN 507- LONG TERM PRESSURIZED GRAPHITE GASKETED JOINT TESTS
American Welding Society (AWS), Seal test
- WRC 339:1988 Development of Tightness Test Procedures for Gaskets in Elevated Temperature Service
TR-TSE, Seal test
- TS 1092-1972 METHODS OF TEST POR BOT POURED ELASTIC TYPE?S OF CONCRETE, JOINT SEALERS
American Society for Testing and Materials (ASTM), Seal test
International Federation of Trucks and Engines, Seal test
SAE - SAE International, Seal test
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Seal test
- PREN 3096-1989 Aerospace Series Sealants Test Method Determination of Tack-Free Time
BE-NBN, Seal test