ZH
RU
ES

industry test standard iso

industry test standard iso, Total:458 items.

In the international standard classification, industry test standard iso involves: Paint coating processes, Vocabularies, Ventilators. Fans. Air-conditioners, Thermodynamics and temperature measurements, Environmental protection, Corrosion of metals, Products of non-ferrous metals, Buildings, Civil engineering in general, Earthworks. Excavations. Foundation construction. Underground works, Organic chemicals, Construction materials, Industrial automation systems, Non-destructive testing, Agricultural machines, implements and equipment, Company organization and management, Electromagnetic compatibility (EMC), Construction industry, Education, Rubber, Linear and angular measurements, Services, Valves, Software development and system documentation, Welding, brazing and soldering, Surface treatment and coating, Paints and varnishes, Plastics, Protection against fire, Equipment for petroleum and natural gas industries, Lubricants, industrial oils and related products, Standardization. General rules, Applications of information technology, Products of the textile industry, Photography, Fuels, Quality, Finances. Banking. Monetary systems. Insurance, Internal combustion engines for road vehicles, Testing of metals, Tea. Coffee. Cocoa, Medical equipment, Water quality, Burners. Boilers, Petroleum, petroleum products and natural gas handling equipment, Waxes, bituminous materials and other petroleum products, Petroleum products in general, Radiation measurements, Paint coating equipment, Ergonomics, Safety of machinery, Wastes, Products of the chemical industry, Hand-held tools, Domestic, commercial and industrial heating appliances, Tobacco, tobacco products and related equipment, Protective equipment, Laundry appliances, Telecommunication systems, Paint ingredients, Adhesives, Noise with respect to human beings.


AT-ON, industry test standard iso

  • ONORM EN 29283-1993 Manipulating industrial robots - Performance criteria and related test methods (ISO 9283:1990 including Amendment 1:1991)
  • ONR CEN ISO/TS 24283-3:2021 Geotechnical investigation and testing - Qualification criteria and assessment - Part 3: Qualified enterprise (ISO/DTS 24283-3:2021)
  • OENORM EN ISO 14982-1:2021 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria - Part 1: General EMC requirements (ISO/DIS 14982-1:2021)
  • OENORM EN ISO 15537:2021 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO/DIS 15537:2021)
  • OENORM EN ISO 23321:2021 Solvents for paints and varnishes - Demineralized water for industrial applications - Specification and test methods (ISO 23321:2019)

HU-MSZT, industry test standard iso

American Society for Testing and Materials (ASTM), industry test standard iso

  • ASTM D6577-06(2011)e1 Standard Guide for Testing Industrial Protective Coatings
  • ASTM E644-06 Standard Test Methods for Testing Industrial Resistance Thermometers
  • ASTM E644-04 Standard Test Methods for Testing Industrial Resistance Thermometers
  • ASTM E644-09 Standard Test Methods for Testing Industrial Resistance Thermometers
  • ASTM D849-97 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
  • ASTM D849-02 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
  • ASTM D849-09 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
  • ASTM D849-11 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
  • ASTM D848-03 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
  • ASTM E329-11b Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
  • ASTM D849-05 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
  • ASTM D849-03 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
  • ASTM E1114-09 Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources
  • ASTM E1815-96 Standard Test Method for Classification of Film Systems for Industrial Radiography
  • ASTM E1815-96(2001) Standard Test Method for Classification of Film Systems for Industrial Radiography
  • ASTM E1815-18 Standard Test Method for Classification of Film Systems for Industrial Radiography
  • ASTM E1114-09(2014) Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources
  • ASTM E329-14a Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
  • ASTM E1815-18(2023) Standard Test Method for Classification of Film Systems for Industrial Radiography
  • ASTM D6577-06 Standard Guide for Testing Industrial Protective Coatings
  • ASTM D6577-00a Standard Guide for Testing Industrial Protective Coatings
  • ASTM D6577-00 Standard Guide for Testing Industrial Protective Coatings
  • ASTM D6577-15(2019) Standard Guide for Testing Industrial Protective Coatings
  • ASTM D6577-15 Standard Guide for Testing Industrial Protective Coatings
  • ASTM D4483-99 Standard Practice for Determining Precision for Test Method Standards in the Rubber and Carbon Black Industries
  • ASTM E644-11(2019) Standard Test Methods for Testing Industrial Resistance Thermometers
  • ASTM E1114-09e1 Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources
  • ASTM E329-13b Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
  • ASTM E329-13c Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
  • ASTM E329-13 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
  • ASTM E329-13a Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
  • ASTM D849-15 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
  • ASTM E644-11 Standard Test Methods for Testing Industrial Resistance Thermometers
  • ASTM D4483-05a(2011) Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
  • ASTM D6943-03 Standard Practice for Immersion Testing of Industrial Protective Coatings
  • ASTM D848-97 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
  • ASTM D848-09 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
  • ASTM D4712-87a(2001) Standard Guide for Testing Industrial Water-Reducible Coatings
  • ASTM D4712-87a(1996) Standard Guide for Testing Industrial Water-Reducible Coatings
  • ASTM D848-23 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
  • ASTM D848-14 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
  • ASTM E1114-03 Standard Test Method for Determining the Focal Size of Iridium-192 Industrial Radiographic Sources
  • ASTM D1555M-00 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons [Metric]
  • ASTM D1555M-04e1 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
  • ASTM D1555M-04 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
  • ASTM E1114-92(1997)e1 Standard Test Method for Determining the Focal Size of Iridium-192 Industrial Radiographic Sources
  • ASTM E1114-20 Standard Test Method for Determining the Size of Iridium-192, Cobalt-60, and Selenium-75 Industrial Radiographic Sources
  • ASTM D848-02 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
  • ASTM D6943-10 Standard Practice for Immersion Testing of Industrial Protective Coatings
  • ASTM D848-18 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
  • ASTM D849-15(2019)e1 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
  • ASTM D3245-03 Standard Test Method for Pumpability of Industrial Fuel Oils
  • ASTM E284-99a Standard Terminology of Appearance
  • ASTM E284-01 Standard Terminology of Appearance
  • ASTM E284-02 Standard Terminology of Appearance
  • ASTM E284-02a Standard Terminology of Appearance
  • ASTM E284-02b Standard Terminology of Appearance
  • ASTM E2849-18 Standard Practice for Professional Certification Performance Testing
  • ASTM E284-08 Standard Terminology of Appearance
  • ASTM E284-09 Standard Terminology of Appearance
  • ASTM E1165-04 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
  • ASTM E1165-92(1996)E1 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
  • ASTM E1165-92(2002) Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
  • ASTM E1165-12(2017) Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
  • ASTM E1165-20 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
  • ASTM E1165-04(2010) Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
  • ASTM E1165-12 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging
  • ASTM E3024/E3024M-22 Standard Practice for Magnetic Particle Testing for General Industry
  • ASTM E3024/E3024M-22a Standard Practice for Magnetic Particle Testing for General Industry
  • ASTM E3024/E3024M-16 Standard Practice for Magnetic Particle Testing for General Industry
  • ASTM D3245-96 Standard Test Method for Pumpability of Industrial Fuel Oils
  • ASTM C448-88(2006) Standard Test Methods for Abrasion Resistance of Porcelain Enamels
  • ASTM C448-88(2011)e1 Standard Test Methods for Abrasion Resistance of Porcelain Enamels
  • ASTM D6943-15(2019) Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings
  • ASTM F2990-12(2018) Standard Test Method for Commercial Coffee Brewers
  • ASTM D1555-16 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
  • ASTM D1555-21 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane
  • ASTM D6875-23 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
  • ASTM D850-21 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • ASTM D850-03 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • ASTM D850-99A Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • ASTM D850-02 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • ASTM D850-00 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • ASTM D850-02e1 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • ASTM D850-18e1 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • ASTM D850-18 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • ASTM D891-18 Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
  • ASTM D850-11 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • ASTM D850-16 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • ASTM C1068-21 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
  • ASTM C1093-12 Standard Practice for Accreditation of Testing Agencies for Masonry
  • ASTM C1093-13a Standard Practice for Accreditation of Testing Agencies for Masonry
  • ASTM C1093-13ae1 Standard Practice for Accreditation of Testing Agencies for Masonry
  • ASTM C1093-13 Standard Practice for Accreditation of Testing Agencies for Masonry
  • ASTM D1555M-04a Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
  • ASTM D6875-03 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
  • ASTM D1555-95(2000) Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons
  • ASTM D6875-08 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
  • ASTM D1555M-16 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
  • ASTM D1555M-22 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
  • ASTM D1555M-08 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]
  • ASTM D8163-17 Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings
  • ASTM D8163-18 Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings
  • ASTM D8163-18(2023) Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings
  • ASTM D4483-14 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
  • ASTM D2970/D2970M-98e1 Standard Test Method for Testing Tire Cords, Tire Cord Fabrics, and Industrial Yarns Made From Glass Filaments
  • ASTM D800-05 Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
  • ASTM C614-10(2011)e1 Standard Test Method for Alkali Resistance of Porcelain Enamels
  • ASTM D800-05(2014) Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions
  • ASTM E1815-08 Standard Test Method for Classification of Film Systems for Industrial Radiography
  • ASTM D850-03(2008)e1 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
  • ASTM C1068-03 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
  • ASTM F1826-00 Standard Specification for Live Line and Measuring Telescoping Tools
  • ASTM F1826-00(2006) Standard Specification for Live Line and Measuring Telescoping Tools
  • ASTM C1068-03(2011) Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
  • ASTM E180-93 Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial Chemicals
  • ASTM D6875-12 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
  • ASTM D6875-18 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
  • ASTM F2644-07(2019) Standard Test Method for Performance of Commercial Patio Heaters
  • ASTM D7179-05 Standard Test Method for Determining Geonet Breaking Force
  • ASTM D717-86(1999) Standard Test Methods for Analysis of Magnesium Silicate Pigment
  • ASTM D7179-07 Standard Test Method for Determining Geonet Breaking Force
  • ASTM D7179-07e1 Standard Test Method for Determining Geonet Breaking Force
  • ASTM D7179-18 Standard Test Method for Determining Geonet Breaking Force
  • ASTM E119-10b Standard Test Methods for Fire Tests of Building Construction and Materials
  • ASTM D5502-21 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
  • ASTM D4497-94(1999) Standard Test Method for Determining the Open Time of Hot Melt Adhesives (Manual Method)
  • ASTM C614-74(2005) Standard Test Method for Alkali Resistance of Porcelain Enamels
  • ASTM E1815-06 Standard Test Method for Classification of Film Systems for Industrial Radiography
  • ASTM C614-10 Standard Test Method for Alkali Resistance of Porcelain Enamels
  • ASTM E1815-08(2013)e1 Standard Test Method for Classification of Film Systems for Industrial Radiography
  • ASTM D6943-15 Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings
  • ASTM C614-10(2015) Standard Test Method for Alkali Resistance of Porcelain Enamels
  • ASTM C1068-96e1 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
  • ASTM D7243-11 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
  • ASTM D5502-00(2010) Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

Government Electronic & Information Technology Association, industry test standard iso

  • GEIA IEEE_EIA 12207.0:1998 Industry Implementation of International Standard ISO/IEC 12207 : 1995 (ISO/IEC 12207) Standard for Information Technology - Software Life Cycle Processes
  • GEIA IEEE_EIA 12207.2:1998 Industry Implementation of International Standard ISO/IEC 12207: 1995 (ISO/IEC 12207) Standard for Information Technology - Software Life Cycle Processes - Implementation Considerations Replaces EIA J-STD-016

Lithuanian Standards Office , industry test standard iso

  • LST EN ISO 5801:2009 Industrial fans - Performance testing using standardized airways (ISO 5801:2007 including Cor 1:2008)
  • LST EN ISO 5802:2009 Industrial fans - Performance testing in situ (ISO 5802:2001)
  • LST EN ISO 22476-3:2005 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005)
  • LST EN ISO 13350:2009 Industrial fans - Performance testing of jet fans (ISO 13350:1999)
  • LST EN 12266-2-2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
  • LST EN ISO 10093:2000 Plastics - Fire tests - Standard ignition sources (ISO 10093:1998)
  • LST EN ISO 1514:2005 Paints and varnishes - Standard panels for testing (ISO 1514:2004)
  • LST EN ISO 22476-3:2005/A1:2012 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test - Amendment 1 (ISO 22476-3:2005/Amd.1:2011)
  • LST EN ISO 10416:2010 Petroleum and natural gas industries - Drilling fluids - Laboratory testing (ISO 10416:2008)
  • LST EN ISO 15797:2004 Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2002)
  • LST EN 12266-1-2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
  • LST EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
  • LST EN ISO 139:2005 Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005)
  • LST EN ISO 8596:2009 Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation (ISO 8596:2009)
  • LST EN ISO 13500:2009 Petroleum and natural gas industries - Drilling fluid materials - Specifications and tests (ISO 13500:2008)
  • LST EN ISO 15797:2004/AC:2005 Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2002/Cor.1:2004)
  • LST EN ISO 13679:2007 Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO 13679:2002)
  • LST ISO 1998-2:2005 Petroleum industry. Terminology. Part 2: Properties and tests (identical ISO 1998-2:1998)
  • LST EN ISO 15537:2005 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO 15537:2004)
  • LST EN ISO 12863:2011 Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010)
  • LST EN ISO 23321:2021 Solvents for paints and varnishes - Demineralized water for industrial applications - Specification and test methods (ISO 23321:2019)
  • LST EN ISO 105-C12:2006 Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering (ISO 105-C12:2004)

AENOR, industry test standard iso

  • UNE-EN ISO 5801:2010 Industrial fans - Performance testing using standardized airways (ISO 5801:2007 including Cor 1:2008)
  • UNE-EN ISO 5802:2010 Industrial fans - Performance testing in situ (ISO 5802:2001)
  • UNE-EN ISO 22476-3:2006 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test (ISO 22476-3:2005)
  • UNE-ISO 6055:2007 Industrial trucks. Overhead guards. Specification and testing. (ISO 6055:2004)
  • UNE-EN 12266-2:2013 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
  • UNE-EN ISO 1514:2017 Paints and varnishes - Standard panels for testing (ISO 1514:2016)
  • UNE-EN ISO 22476-3:2006/A1:2014 Geotechnical investigation and testing - Field testing - Part 3: Standard penetration test - Amendment 1 (ISO 22476-3:2005/Amd 1:2011)
  • UNE-EN ISO 15797:2004 Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2002)
  • UNE-EN 12266-1:2013 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
  • UNE-EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
  • UNE-EN ISO 139:2005 Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005)
  • UNE-EN ISO 8596:2010 Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation (ISO 8596:2009)
  • UNE-CEN ISO/TS 27469:2012 EX Petroleum, petrochemical and natural gas industries - Method of test for fire dampers (ISO/TS 27469:2010)
  • UNE-EN 25580:1993 NON-DESTRUCTIVE TESTING. INDUSTRIAL RADIOGRAPHIC ILLUMINATORS. MINIMUN REQUIREMENTS. (ISO 5580:1985).
  • UNE-EN ISO 15537:2005 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO 15537:2004)
  • UNE-EN ISO/ASTM 52921:2017 Standard terminology for additive manufacturing - Coordinate systems and test methodologies (ISO/ASTM 52921:2013)
  • UNE-EN ISO 12863:2011 Standard test method for assessing the ignition propensity of cigarettes (ISO 12863:2010)
  • UNE-EN ISO 105-C12:2007 Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering (ISO 105-C12:2004)

SAE - SAE International, industry test standard iso

  • SAE J872-1986 Drawbar Test Procedure for Construction@ Forestry@ and Industrial Machines@ Standard
  • SAE J1446-1989 On-Machine Alarm Test and Evaluation Procedure for Construction and General Purpose Industrial Machinery@ Standard

Professional Standard - Environmental Protection, industry test standard iso

  • HJ/T 273-2006 Standard for sector-specific eco-industrial parks (on trial)
  • HJ/T 275-2006 Standard for venous industry based eco-industrial parks (on trial)
  • HJ/T 274-2006 Standard for sector-integrate eco-industrial parks (on trial)

Association Francaise de Normalisation, industry test standard iso

  • NF E51-008:2009 Industrial fans - Performance testing using standardized airways.
  • FD T54-193:1997 Plastiques - Films et feuilles à base de polymères pour l'industrie - Critères industriels de caractérisation et méthodes d'essai.
  • NF UTE C46-301:1977 Mesure et commande dans les processus industriels - Transmetteurs de pression différentielle à usage industriel - Norme de qualification (norme provisoire)
  • NF E61-103*NF ISO 9283:2016 Manipulating industrial robots - Performance criteria and related test methods
  • NF C46-301:1977 Industrial-Process Measurement and Control Industrial differential pressure transmitter Qualificatoin Standard
  • UTE C46-301U*UTE C46-301:1977 Industrial process measurement and control. Industrial differential pressure transmitter. Qualification standard.
  • NF ISO 9283:2016 Robots manipulateurs industriels - Critères de performance et méthodes d'essai correspondantes
  • NF EN 12266-2:2012 Robinetterie industrielle - Essais des appareils de robinetterie métalliques - Partie 2 : essais, modes opératoires d'essai et critères d'acceptation - Prescriptions complémentaires
  • NF EN 12266-1:2012 Robinetterie industrielle - Essais des appareils de robinetterie métalliques - Partie 1 : essais sous pression, procédures d'essai et critères d'acceptation - Prescriptions obligatoires
  • NF E29-311-2*NF EN 12266-2:2012 Industrial valves - Testing of metallic valves - Part 2 : tests, test procedures and acceptance criteria - Supplementary requirements

Danish Standards Foundation, industry test standard iso

  • DS/EN ISO 5801:2009 Industrial fans - Performance testing using standardized airways
  • DS/EN 29283:1994 Manipulating industrial robots. Performance criteria and related test methods
  • DS/ISO 1:1980 Standard reference temperature for industrial length measurements
  • DS/EN 12266-2:2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
  • DS/EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements

Institute of Electrical and Electronics Engineers (IEEE), industry test standard iso

American National Standards Institute （ANSI), industry test standard iso

  • ANSI/BOMA Z65.2-2012 Industrial Buildings: Standard Methods of Measurement
  • ANSI/IEEE 15026-1:2011 Trial-Use Standard for Adoption of ISO/IEC TR 15026-1:2010 - Systems and Software Engineering -Systems
  • ASTM E165/E165M-23 Standard Practice for Liquid Penetrant Testing for General Industry
  • BS EN ISO 15537:2022 Tracked Changes. Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (British Standard)

Group Standards of the People's Republic of China, industry test standard iso

  • T/HACE 006-2021 Occupational standards for construction project tester
  • T/HACE 010-2022 Occupational standards for construction surveyor
  • T/HACE 015-2022 Occupational standards for geotechnical tester of construction project prospecting
  • T/CECS 933-2021 Industrial Corridor Structure Inspection and Appraisal Standard
  • T/CEC 657-2022 Occupational Skills Standards for Electric Power Industry High Voltage Test Workers for Power Plants
  • T/HACE 016-2023 Occupational standards for road engineering testing personnel of construction engineering
  • T/HACE 012-2022 Occupational standards for measurer of construction project prospecting
  • T/ZJX 011-2018 Occupational Skills Evaluation Standards for Measuring Line Workers
  • T/CSCS 041-2023 Technical standards for inspection and appraisal of industrial steel structures
  • T/CECS 1378-2023 Standards for inspection and appraisal of industrial heritage building structures
  • T/HACE 023-2023 Occupational standards for municipal engineering materials testing personnel of construction engineering
  • T/HACE 018-2023 Occupationalstandards for steel structure testing personnelof construction engineering
  • T/HACE 022-2023 Occupationalstandards for bridge and undergroundtesting personnelof construction engineering
  • T/CECS 1119-2022 Inspection and appraisal standard for industrial building steel crane beam system
  • T/HACE 017-2023 Occupationalstandards for subgrade foundationtesting personnelof construction engineering
  • T/HACE 020-2023 Occupational standards for building energy efficient testing personnel of construction engineering
  • T/HACE 021-2023 Occupational standards for curtain wall testing personnel of construction engineering
  • T/BSIA 001-2020 Web application software testing vocational skill level standard
  • T/GSIA 005-2023 Industrial Internet Identification Resolution—Specification for enterprise node service capability test

British Standards Institution (BSI), industry test standard iso

  • BS ISO 5801:2008 Industrial fans - Performance testing using standardized airways
  • 22/30376335 DC BS ISO 6055. Industrial trucks. Overhead guards. Specification and testing
  • 17/30354742 DC BS ISO 6055. Industrial trucks. Overhead guards. Specification and testing
  • 20/30384581 DC BS ISO 23632. Industrial valves. Design validation-testing of valves
  • 19/30354956 DC BS ISO 21876. Machinery for forestry. Saw chain shot protective windows. Test method and performance criteria
  • PD CEN ISO/TS 24283-3:2022 Geotechnical investigation and testing. Qualification criteria and assessment. Qualified enterprise
  • BS EN ISO 5801:2008 Industrial fans. Performance testing using standardized airways
  • PD ISO/IEC Guide 75:2006 Strategic principles for future IEC and ISO standardization in industrial automation
  • 19/30394393 DC BS ISO 52628. Standard practice for dosimetry in radiation processing
  • 13/30264511 DC BS ISO/ASTM 52628. Standard practice for dosimetry in radiation processing
  • 20/30425578 DC BS ISO 5287. Belt drives. V-belts for the automotive industry. Fatigue test
  • BS EN 17542-2:2022 Earthworks. Geotechnical laboratory tests - Fragmentability test standard
  • BS EN 17542-1:2022 Earthworks. Geotechnical laboratory tests - Degradability test standard
  • QGN/95008-1995 Guidance notes on the application of BS EN ISO 9002 for quality management systems in the automotive industry
  • BS EN ISO 9283:1998 Manipulating industrial robots - Performance criteria and related test methods
  • 19/30362917 DC BS ISO 22524. Pilot plan for industrial wastewater treatment facilities in the objective of reuse
  • BS EN 12266-2:2002 Industrial valves - Testing of valves - Tests, test procedures and acceptance criteria - Supplementary requirements
  • 23/30453771 DC BS EN ISO 105-C12. Textiles. Tests for colour fastness - Part C12. Colour fastness to industrial laundering
  • 19/30376055 DC BS ISO 23308-1. Energy efficiency of industrial trucks. Test methods. Part 1. General
  • BS EN 12266-2:2012 Industrial valves. Testing of metallic valves. Tests, test procedures and acceptance criteria. Supplementary requirements
  • 21/30401315 DC BS EN ISO 15537. Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs

International Organization for Standardization (ISO), industry test standard iso

  • ISO 5801:2007 Industrial fans - Performance testing using standardized airways
  • ISO 1:1975 Standard reference temperature for industrial length measurements
  • ISO/R 1:1951 STANDARD REFERENCE TEMPERATURE FOR INDUSTRIAL LENGTH MEASUREMENTS
  • ISO 5801:2007/Cor 1:2008 Industrial fans - Performance testing using standardized airways; Technical Corrigendum 1
  • ISO GUIDE 75:2006 Strategic principles for future IEC and ISO standardization in industrial automation
  • ISO/IEC GUIDE 75:2006 Strategic principles for future IEC and ISO standardization in industrial automation
  • ISO 5801:1997 Industrial fans - Performance testing using standardized airways
  • ISO/TR 37171:2020 Report of pilot testing on the application of ISO smart community infrastructures standards
  • ISO 19277:2018 Petroleum, petrochemical and natural gas industries — Qualification testing and acceptance criteria for protective coating systems under insulation
  • ISO/IEC TR 29154:2013 Software engineering.Guide for the application of ISO/IEC 24773:2008 (Certification of software engineering professionals.Comparison framework)

Professional Standard - Traffic, industry test standard iso

  • JT/T 34.4-1993 Technical grade standards for workers in the transportation industry Traffic survey highway engineering test workers
  • JT/T 34.5-1993 Technical grade standards for workers in the transportation industry Traffic survey navigation geotechnical test workers
  • JT/T 32.11-1993 Technical grade standard for workers in the transportation industry
  • JT/T 32.13-1993 Technical grade standards for workers in the transportation industry
  • JT/T 32.1-1993 Technical grade standard for workers in the transportation industry Aerial survey and lighthouse workers
  • JT/T 32.14-1993 Transportation industry workers technical grade standard navigation mark navigation depth sounder repairman
  • JT/T 32.5-1993 Transportation industry workers technical grade standard navigation mark aerial survey navigation mark charging worker
  • JT/T 32.3-1993 Technical grade standard for workers in the transportation industry Aerial survey and inland river navigation
  • JT/T 32.2-1993 Technical grade standard for workers in the transportation industry Aerial survey and coastal navigation aid workers
  • JT/T 32.4-1993 Transportation industry workers technical grade standard navigation mark aerial survey navigation mark maintenance worker
  • JT/T 32.12-1993 Transportation industry workers technical grade standard navigation mark aerial survey waterway mapper
  • JT/T 32.6-1993 Transportation industry workers technical grade standard navigation mark aerial survey navigation light repairer
  • JT/T 34.3-1993 Technical grade standards for workers in the transportation industry Traffic survey highway engineering surveyors
  • JT/T 34.2-1993 Technical grade standards for workers in the transportation industry Traffic survey navigation engineering surveyors
  • JT/T 34.6-1993 Technical grade standard for workers in the transportation industry Traffic survey and hydrological test workers
  • JT/T 34.1-1993 Technical grade standards for workers in the transportation industry Traffic survey and prospecting workers
  • JT/T 33.10-1993 Technical grade standards for workers in the transportation industry Highway engineering and navigation engineering test workers
  • JT/T 32.9-1993 Workers in the transportation industry technical grade standard navigation mark aerial survey radio pointing mark operator
  • JT/T 33.9-1993 Technical grade standards for workers in the transportation industry Highway engineering and navigation engineering surveyors
  • JT/T 32.10-1993 Transportation industry workers technical grade standard navigation mark aerial survey radio navigation electromechanical
  • JT/T 32.8-1993 Transportation industry workers technical grade standard navigation mark aerial survey radio navigation timing worker
  • JT/T 32.7-1993 Technical grade standards for workers in the transportation industry Aids to navigation radio navigation transmitter workers
  • JT/T 30.2-1993 Technical grade standards for workers in the transportation industry Waterway dredging and dredging surveyors
  • JT/T 34.7-1993 Technical grade standard for workers in the traffic industry Traffic survey instrument maintenance workers
  • JT/T 32.15-1993 Transportation industry workers technical grade standard navigation mark aerial survey radio locator repairman
  • JT/T 27.48-1993 Technical grade standard for workers in the transportation industry Test workers for road transport and road maintenance

German Institute for Standardization, industry test standard iso

  • DIN EN ISO 5801:2010 Industrial fans - Performance testing using standardized airways (ISO 5801:2007, including Cor 1:2008); German version EN ISO 5801:2008
  • DIN ISO 21876:2021 Machinery for forestry - Saw chain shot protective windows - Test method and performance criteria (ISO 21876:2020)
  • DIN EN ISO 23632:2022 Industrial valves - Design validation-testing of valves (ISO 23632:2021)
  • DIN EN ISO 19277:2019 Petroleum, petrochemical and natural gas industries - Qualification testing and acceptance criteria for protective coating systems under insulation (ISO 19277:2018); English version EN ISO 19277:2018
  • DIN ISO 21876:2021-08 Machinery for forestry - Saw chain shot protective windows - Test method and performance criteria (ISO 21876:2020)
  • DIN EN 12266-2:2012-04 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements; German version EN 12266-2:2012
  • DIN EN ISO 5801:2011 Industrial fans - Performance testing using standardized airways (ISO 5801:2007, including Cor 1:2008); German version EN ISO 5801:2008
  • DIN EN 12266-1:2012-06 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements; German version EN 12266-1:2012
  • DIN EN ISO 14982:2009 Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998); German version EN ISO 14982:2009
  • DIN EN ISO 13350:2010 Industrial fans - Performance testing of jet fans (ISO 13350:1999); German version EN ISO 13350:2008
  • DIN EN ISO 15797 Berichtigung 1:2005 Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2002); German version EN ISO 15797:2004, Corrigenda to EN ISO 15797:2004; German version EN ISO 15797:2004/AC:2004
  • DIN EN 12266-2:2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements; German version EN 12266-2:2012
  • DIN EN 25580:1992-06 Non-destructive testing; industrial radiographic illuminators; minimum requirements (ISO 5580:1985); german version EN 25580:1992 / Note: To be replaced by DIN EN ISO 5580 (2023-03) (in preparation).
  • DIN ISO 11169:2016 Machinery for forestry - Wheeled special machines - Vocabulary, performance test methods and criteria for brake systems (ISO 11169:1993)
  • DIN EN ISO 291:2006 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2005); English version of DIN EN ISO 291:2006-02
  • DIN EN ISO 13679:2019 Petroleum and natural gas industries - Procedures for testing casing and tubing connections (ISO 13679:2019); English version EN ISO 13679:2019

CN-STDBOOK, industry test standard iso

  • 图书 3-9960 Service industry standardization pilot work practice

SE-SIS, industry test standard iso

  • SIS SS-ISO 9283:1992 Manipulating industrial robots — Perfor- mance criteria and related test methods
  • SIS SS-ISO 1:1979 Standard reference temperature for industrial length measurements

RO-ASRO, industry test standard iso

Standard Association of Australia （SAA）, industry test standard iso

  • AS 3984:1991 Manipulating industrial robots - Performance criteria and related test methods
  • AS ISO 5801:2004 Industrial fans - Performance testing using standardized airways

未注明发布机构, industry test standard iso

  • DIN EN ISO 9283:1999 Manipulating industrial robots – Performance criteria and related test methods
  • BS ISO 18165:2001 Petroleum and natural gas industries — Performance testing of cementing float equipment

NL-NEN, industry test standard iso

  • NEN-ISO 9283:1993 Manipulating industrial robots. Performance criteria and related test methods (ISO 9283:1990+A1:1991)

European Committee for Standardization (CEN), industry test standard iso

  • FprCEN ISO/TS 24283-3:2021 Geotechnical investigation and testing - Qualification criteria and assessment - Part 3: Qualified enterprise (ISO/PRF TS 24283-3:2021)
  • EN 12266-2:2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
  • EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
  • EN ISO 1514:2016 Paints and varnishes - Standard panels for testing
  • prEN ISO 14982-1:2021 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria - Part 1: General EMC requirements (ISO/DIS 14982-1:2021)
  • prEN ISO 14982-1 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria - Part 1: General EMC requirements (ISO/DIS 14982-1:2021)
  • prEN ISO 15537:2021 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO/DIS 15537:2021)
  • prEN ISO 105-C12 rev Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering (ISO 105-C12:2004)
  • EN ISO 14982:2009 Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
  • CEN ISO/TS 24283-2:2022 Geotechnical investigation and testing - Qualification criteria and assessment - Part 2: Responsible expert (ISO/TS 24283-2:2022)

RU-GOST R, industry test standard iso

  • GOST R 52504-2005 Electromagnetic compatibility of technical equipment. Agricultural and forestry machinery. Test methods and acceptance criteria
  • GOST R 60.3.3.1-2016 Manipulating industrial robots. Performance criteria and related test methods
  • GOST R 12.4.210-1999 Occupational safety standards system. Hearing protectors. Ear-muffs attached to an industrial safety helmet. General technical requirements. Methods of testing
  • GOST 12.4.162-1985 Occupational safety standards system. Industrial polymeric boots for protection from mechanical effect. General technical requirements. Test methods
  • GOST 12.2.013.14-1990 Occupational safety standards system. Electric hand-held tools. Particular safety requirements and planers testing methods
  • GOST 12.1.050-1986 Occupational safety standards system. Methods of noise measurement at work-places

Professional Standard - Non-ferrous Metal, industry test standard iso

  • YS/T 135-1992 Monitoring Standards for Rational Energy Utilization of Industrial Furnaces in Non-ferrous Metal Processing Enterprises

YU-JUS, industry test standard iso

  • JUS M.A0.001-1978 Standard reference temperature for industrial length measurements
  • JUS H.B8.186-1979 Aluminiumfluoridefor industrial use. Sampling and preparation oftest samples
  • JUS H.B8.171-1979 Sodium fluoride for industrial use. Sampling and preparation of test samples

Beijing Provincial Standard of the People's Republic of China, industry test standard iso

  • DB11/ 180-2003 Monitoring and testing method of energy saving for gas-fired industrial boilers

ES-UNE, industry test standard iso

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., industry test standard iso

  • IEEE 515-1997 Standard for the Testing@ Design@ Installation@ and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications

ATIS - Alliance for Telecommunications Industry Solutions, industry test standard iso

  • T1.277-2003 XML Schema Interface for POTS Service Test (Trial-Use Standard)

TR-TSE, industry test standard iso

  • TS 186-1965 STANDARD REFERENCE TEMPERATURE FOR INDUSTRIAL LENGTH MEASUREMENTS

Professional Standard - Military and Civilian Products, industry test standard iso

  • WJ 9046-2004 Calibration specification for industrial explosive detonation velocity tester
  • WJ 9047-2004 Calibration specification for electric parameter tester of industrial electric detonator

国防科学技术工业委员会, industry test standard iso

  • WJ/T 9046-2004 Calibration specifications for industrial explosives detonation velocity tester
  • WJ/T 9047-2004 Calibration specifications for industrial electric detonator electrical parameter testers

Institute of Electrical and Electronics Engineers/Electronic Industry Association, industry test standard iso

  • IEEE/EIA 12207.0-1996 Industry implementation of International Standard ISO/IEC 12207:1995 - Standard for information technology - Software life cycle processes

Association of German Mechanical Engineers, industry test standard iso

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, industry test standard iso

  • GB/T 1236-2017 Industrial fan—Performance testing using standardized airways

Tianjin Provincial Standard of the People's Republic of China, industry test standard iso

  • DB12/T 1052-2024 Guidance for the Construction of Municipal Service Industry Standardization Pilot Projects
  • DB12/T 1052-2021 Guidance for the Construction of Municipal Service Industry Standardization Pilot Projects

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, industry test standard iso

  • GB/T 30913-2014 Standard test method for classification of film systems for industrial radiography
  • GB/T 1236-2000 Industrial fans-Performance testing using standardized airways
  • GB/T 5087-1985 Test method standard for corrosivity of solid waste in nonferrous metal industry
  • GB/T 17799.2-2003 Electromagnetic compatibility--Generic standards--Immunity for industrial environments
  • GB 50581-2010 Standard for allocated mine monitoring and controlling system of coal industry
  • GB 50581-2020 Coal Industry Mine Monitoring System Equipment Configuration Standards
  • GB/T 9582-2008 Photography.Industrial radiographic films.Determination of ISO speed,ISO average gradient and ISO gradients G and G when exposed to X-and Gamma-radiation
  • GB/T 17799.1-1999 Electromagnetic compatibility-- Generic Standards-- Immunity for residential,commercial and light-industrial environments

Society of Automotive Engineers (SAE), industry test standard iso

  • SAE TS202-13-2017 Qualification Test Requirements & Procedures for Aerospace Industry Standard Parts

ZA-SANS, industry test standard iso

  • ARP 956-5-2009 Financial services - UNIversal Financial Industry message scheme Part 5: ISO 20022 reverse engineering

KR-KS, industry test standard iso

  • KS B ISO 9283-2016 Manipulating industrial robots－Performance criteria and related test methods
  • KS B ISO 9283-2021 Manipulating industrial robots —Performance criteria and related test methods
  • KS A ISO TR 21074-2018 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel

CU-NC, industry test standard iso

  • NC 40-142-1988 Manufacturing and Textile Industry. Chemical Fibres Sampling and Test Specimen Preparation

American Industrial Hygiene Association （AIHA), industry test standard iso

Fujian Provincial Standard of the People's Republic of China, industry test standard iso

  • DB35/T 2018-2021 Informatization business collaboration standard compliance test

Japanese Industrial Standards Committee (JISC), industry test standard iso

  • JIS K 0350-10-10:2002 Testing methods for standard plate counts of heterotrophic bacteria in industrial water and wastewater
  • JIS B 8432:1993 Manipulating industrial robots -- Performance criteria and related test methods
  • JIS B 8432:1999 Manipulating industrial robots -- Performance criteria and related test methods

Jilin Provincial Standard of the People's Republic of China, industry test standard iso

  • DB22/T 1973-2013 Coal-fired industrial boiler energy efficiency test index and its limit

Korean Agency for Technology and Standards (KATS), industry test standard iso

  • KS B ISO 9283:2021 Manipulating industrial robots —Performance criteria and related test methods
  • KS B ISO 9283:2016 Manipulating industrial robots－Performance criteria and related test methods
  • KS A ISO TR 21074:2018 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel

ES-AENOR, industry test standard iso

PT-IPQ, industry test standard iso

BE-NBN, industry test standard iso

  • NBN-EN 29506-4-1994 Industrial automation systems - Manufacturing Message Specification - Part 4 : Companion standard for numerical control (ISO/IEC 9506-4 : 1992)
  • NBN-EN 29283-1993 Manipulating industrial robots. Performance criteria and related test methods (ISO 9283: 1990 including Amendment 1: 1991)

Professional Standard - Building Materials, industry test standard iso

  • JC/T 615-1995 General assessment standard and test method of process-control computer system of the building material industry

CH-SNV, industry test standard iso

  • SN EN ISO 23321:2021 Solvents for paints and varnishes - Demineralized water for industrial applications - Specification and test methods (ISO 23321:2019)

Professional Standard - Post and Telecommunication, industry test standard iso

  • YDN 115.3-1999 Test specification for China intelligent network services (Vote of telephone service) (internal standard)
  • YDN 115.4-1999 Test specification for China intelligent network services (Mass calling service) (internal standard)

US-FCR, industry test standard iso

AWS - American Welding Society, industry test standard iso

  • QC4-1989 Standard for Accreditation of Test Facilities for AWS Certified Welder Program

American Welding Society (AWS), industry test standard iso

  • AWS QC4-1989 Standard for Accreditation of Test Facilities for AWS Certified Welder Program

PL-PKN, industry test standard iso

  • PN C99282-11-1993 Photography. Industrial radiographic film. Determination of ISO speed and ISO average gradient when exposed to X- and gamma-radiation

  iso noise test standard, industry test standard iso, industry test standard iso, standard vision test iso, ISO 5801 Industrial fans - Performance tests using standardized ventilation ducts, test standard iso, iso test standard, iso standard test.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved