ZH
RU
ES

metal bath

metal bath, Total:276 items.

In the international standard classification, metal bath involves: Heat treatment, Products of the textile industry, Testing of metals, Power stations in general, Lamps and related equipment, On-board equipment and instruments, Equipment for processing of minerals, Surface treatment and coating, Optics and optical measurements, Fasteners, Measurement of volume, mass, density, viscosity, Analytical chemistry, Construction of waterways and ports, Metrology and measurement in general, METROLOGY AND MEASUREMENT. PHYSICAL PHENOMENA, Non-destructive testing, Mining equipment, Shipbuilding and marine structures in general, Non-ferrous metals, Linear and angular measurements, Rubber and plastics products, Mechanical testing, Water quality, Dentistry, Medical equipment, Iron and steel products, TESTING, Petroleum products in general, Test conditions and procedures in general, Powder metallurgy, Road vehicles in general, Electromechanical components for electronic and telecommunications equipment, Paint coating processes, Nuclear energy engineering, Measurement of force, weight and pressure, Products of the chemical industry, Production of metals, Electrical accessories, Electrical and electronic testing, Environmental testing, Sterilization and disinfection.

RO-ASRO, metal bath

STAS 12979-1991 Metallic coatings. Ematalixation bathes analysis methods
STAS 12915-1990 Metallic coatings. Browning bathes. Analysis methods
STAS 12927-1990 Metallic coatings. Degraesing bathes. Analysis methods
SR ISO 105-Z01:1995 Textiles - Tests for colour fastness - Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
STAS SR ISO 1797-1:1992 Dental rotary instrumente - Shahks Part 1: Shanks made of metals
SR ISO 105-Z02:1995 Textiles - Tests for colour fastness - Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
STAS 868-1965

IT-UNI, metal bath

HU-MSZT, metal bath

CZ-CSN, metal bath

CSN 91 4118-1967 Enamelled sheet-metal bath tunb for babies
CSN 03 8541-1973 Metal coatings. Nickel coatings produced by currentless deposition from a hypophosphite bath
CSN 25 0252-1964 Calibration of machines for creep testing of metals.
CSN 36 1106-1986 Electrically heated furnaces and salt baths for heating and heat treatment of metals. Energy consumption rates
CSN 42 0624-1987 Chemical analysis of non-ferrous metals and alloys. Nonferrous metals and alloys. Determination of sulphur by automatic analyzers
CSN ISO 4518:1994 Metallic coatings. Measurement of coating thickness. Profilometric method
CSN 42 0648 Cast.5-1986 Chemical analysis of metallic chromium. Determination of nitrogen by the titration and by the method with automatic analyzers

Professional Standard - Machinery, metal bath

JB/T 6048-2004 Heating and Cooling in Salt Bath for Metallic Components
JB/T 11117-2010 Metal detector for separate material
JB/T 11605-2013 Non-destructive testing instruments.Metal magnetic memory instrument specification
JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
JB/T 5326-1991 Test method of crevice corrosion of metallic material for instrument
JB/T 6819.6-1993 Instrument material terminology - Expansion alloy, thermal bimetal, electrical vacuum material and sealing material

U.S. Air Force, metal bath

AIR FORCE A-A-58033-1994 REFLECTOMETER, METALLIC, TIME DOMAIN

IN-BIS, metal bath

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, metal bath

GB/T 8443-1998 Textiles--Testing method for colour fastness to metals in the dye-bath: Chromium Salts
GB/T 8444-1998 Textiles--Testing method for colour fastness to metals in the dye-bath: Iron and Copper
GB/T 22935-2008 Metal-halide lamps for projecting apparatus
GB/T 21838.4-2008 Metallic materials.Instrumented indentation test for hardness and materials Parameters.Part 4:Test method for metallic and non-metallic coatings
GB/T 19780-2005 Capacity calibration of spherical metal tank-Total station external measuring method
GB/T 11378-2005 Metallic coatings.Measurement of coating thickness.Profilometric method
GB/T 8360-1987 The lattice constant determination of metals--Method of X-ray diffractometer
GB/T 26836-2011 Non-destructive testing instruments.Specification for metal ceramic X-ray tube
GB/T 12789.4-1994 Criteria for nuclear reactor instrumentation. Part four: Liquid-metal cooled fast reactors
GB/T 12789.4-94 Nuclear Reactor Instrumentation Guidelines Part IV: Liquid Metal Cooled Fast Reactors

Professional Standard - Textile, metal bath

FZ/T 01088-1999 Test method for color fastness of textiles to metal complex salts in dye bath
FZ/T 01089-1999 Test method for color fastness of textiles to iron and copper metals in a dye bath
FZ/T 01089-2000 Test method for color fastness of textiles to iron and copper metals in a dye bath

Japanese Industrial Standards Committee (JISC), metal bath

JIS B 7755:2011 Charpy pendulum impact test for metal -- Instrumentation
JIS B 7741:1991 Extensometers used in metallic material tensile testing
JIS B 7755:1993 Impact testing machines for metallic materials -- Instrumentation
JIS T 5504-1:2001 Dental rotary instruments -- Shanks -- Part 1: Shanks made of metals
JIS T 5504-1:2014 Dental rotary instruments .Shanks.Part 1: Shanks made of metals
JIS C 1613:2007 High irradiance ultraviolet radiometers of the metalhalide lamp type exposure apparatus
JIS H 7805:2005 Method for crystallite size determination in metal catalysts by X-ray diffractometry

Professional Standard - Aviation, metal bath

HB/Z 262-1994 Specification for sampling of specimens for chemical analysis in salt baths for metal heat treatment
HB 8110-2002 Nonmetal smooth bush
HB 8276-2002 Metal plain bush used for instrument (8276)
HB 8277-2002 Metal plain bush used for instrument (8277)
HB 8278-2002 Metal plain bush used for instrument (8278)
HB 8279-2002 Metal plain bush used for instrument (8279)
HB 8280-2002 Metal plain bush used for instrument (8280)
HB 8281-2002 Metal plain bush used for instrument (8281)
HB 7064.1-1994 Method of chemical analysis in salt bath for metal heat treatment - Determination of pH value by acidity meter method
HB 8282-2002 Non-metal bush with flange for instrument
HB 7064.5-1994 Metal heat treatment salt bath chemical analysis method for the determination of chloride ion content by argentometric method
HB 7064.6-1994 Method of chemical analysis in salt bath for heat treatment of metals - Determination of total alkalinity by acid-base titration
HB/Z 352-2002 Stabilizing treatment for metallic parts of precise equipment & instrument for aviation
HB 7064.4-1994 Metal heat treatment salt bath chemical analysis method barium sulfate turbidimetric method for determination of sulfate radical content
HB 7064.3-1994 Metal heat treatment salt bath chemical analysis method barium sulfate precipitation EDTA titration method for determination of sulfate radical content
HB 7064.2-1994 Metal heat treatment salt bath chemical analysis method Barium carbonate precipitation separation acid-base titration method Determination of carbonate content

Professional Standard - Electricity, metal bath

DL/T 1273-2013 Photoelectric type (CCD) Remote Reading Bimetal Benchmark Station
DL/T 2220-2021 Technical regulations for instrumented indentation method testing of mechanical properties of metal materials in power stations

Professional Standard - Military and Civilian Products, metal bath

WJ 461-1995 Metal coating. Specifications for ferrous metal oxidizing coatings of optical instrument
WJ 464-1995 Metal coating. Specifications for ferrous metal phosphate coating coatings of optical instrument
WJ 1855-1989 Gold electroplating for metal cladding optical instruments
WJ 467-1995 Metal and non-metal coatings Pre-painting surface preparation for optical instrument
WJ 2016-1991 Metallic and non-metallic coatings Stainless steel passivation film for military optical instruments
WJ 651-1995 Specification for non-ferrous alloy metal mold castings for optical instruments
WJ 2015-1991 Aluminum and aluminum alloy chemical conversion coatings for metal and non-metal coatings for military optical instruments
WJ 466-1995 Metal coating. Specifications for paint coatings of optical instrument
WJ 455-1995 Metal coating. Specifications for nickel electroplated coatings of optical instrument
WJ 456-1995 Metal coating. Specifications for chromium electroplated coatings of optical instrument
WJ 457-1995 Metal coating. Specifications for cadmium electroplated coatings of optical instrument
WJ 458-1995 Metal coating. Specifications for zinc electroplated coatings of optical instrument
WJ 459-1995 Metal coating. Specifications for silver electroplated coatings of optical instrument
WJ 460-1995 Metal coating. Specifications for tin electroplated coatings of optical instrument
WJ 465-1995 Metal coating. Specifications for copper electroplated coatings of optical instrument
WJ 454-1995 Metal coating. Specifications for black nickel electroplated coatings of optical instrument

Association Francaise de Normalisation, metal bath

NF EN 13403:2003 Ventilation des bâtiments - Conduits non métalliques - Réseau de conduits en panneaux isolants de conduits
NF G07-042*NF EN ISO 105-Z01:1996 Textiles. Tests for colour fastness. Part Z01 : colour fastness to metals in the dye-bath : chromium salts.
NF G07-043*NF EN ISO 105-Z02:1996 Textiles. Tests for colour fastness. Part Z02 : colour fastness to metals in the dye-bath : iron and copper.
NF A03-155-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings.
NF A03-155-4*NF EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4 : test method for metallic and non-metallic coatings
NF A91-149*NF EN ISO 15720:2001 Metallic coatings - Porosity tests - Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography.
NF A91-114:1995 Metallic coatings. Measurement of coating thickness. Profilometric method.
NF A95-113:1984 Powder metallurgy. Metallic powders. Determination of flowability by means of a calibrated funnel (hall flowmeter).
NF T37-001-3:2014 Coil coated metals - Test methods - Part 3 : colour difference - Instrumental comparison
NF A03-003:2005 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines.

Defense Logistics Agency, metal bath

DLA MIL-N-3336 A NOTICE 2-2000 NUT, SHEET SPRING, INSTRUMENT MOUNTING
DLA MIL-N-3336 A VALID NOTICE 1-1991 NUT, SHEET SPRING, INSTRUMENT MOUNTING
DLA MIL-N-3336 A (2)-1973 NUT, SHEET SPRING, INSTRUMENT MOUNTING
DLA MIL-N-3336 A-1964 NUT, SHEET SPRING, INSTRUMENT MOUNTING

Korean Agency for Technology and Standards (KATS), metal bath

KS B 5551-2004(2019) Impact testing machines for metallic materials－Instrumentation
KS D ISO 14577-4:2011 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 4:Test method for metallic and non-metallic coatings
KS K ISO 105-Z01:2010 Textiles-Tests for colour fastness-Part Z01:Colour fastness to metals in the dye-bath:Chromium salts
KS K ISO 105-Z01:2015 Textiles－Tests for colour fastness－Part Z01：Colour fastness to metals in the dye-bath：Chromium salts
KS K ISO 105-Z01:2021 Textiles — Tests for colour fastness —Part Z01: Colour fastness to metals in the dye-bath:Chromium salts
KS B 5551-2004 Impact testing machines for metallic materials－Instrumentation
KS K ISO 105-Z02:2010 Textiles-Tests for colour fastness-Part Z02:Colour fastness to metals in the dye-bath:Iron and copper
KS K ISO 105-Z02:2015 Textiles－Tests for colour fastness－Part Z02：Colour fastness to metals in the dye-bath：Iron and copper
KS K ISO 105-Z02:2021 Textiles — Tests for colour fastness —Part Z02: Colour fastness to metals in the dye-bath:Iron and copper
KS D ISO 14577-4-2011(2021) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS D ISO 14577-4-2011(2016) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 4：Test method for metallic and non-metallic coatings
KS D ISO 4518-2012(2017) Metallic coatings－Measurement of coating thickness－Profilometric method
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS B ISO 14577-1-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 1：Test method
KS B ISO 376-2002(2012) Metallic materials－Calibration of force－proving instruments used for the verification of uniaxial testing machines
KS D ISO 4519:2009 Electrodeposited metallic coatings and related finishes－Sampling procedures for inspection by attributes
KS D ISO 3497-2002(2017) Metallic coatings－Measurement of coating thickness－X-ray spectrometric methods
KS B ISO 148-2-2004(2009) Metallic materials－Charpy pendulum impact test－Part 2：Verification of test machines
KS C IEC 60695-2-10:2001 Fire hazard testing－Part 2－10：Glowing/hot-wire based test methods：Glow-wire apparatus and common test procedure
KS B ISO 376:2002 Metallic materials-Calibration of force-proving instruments used for the verification of uniaxial testing machines
KS B ISO 376:2015 Metallic materials－Calibration of force－proving instruments used for the verification of uniaxial testing machines

German Institute for Standardization, metal bath

DIN 12893:1976 Metal laboratory ware; stand rods
DIN 12894:1997 Metal laboratory ware - Clamps
DIN 12895-2:1978 Metal laboratory ware; hook connector
DIN EN ISO 7153-1:2001 Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment 1:1999); English version of DIN EN ISO 7153-1:2001-02
DIN EN ISO 14577-4:2017-04 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016); German version EN ISO 14577-4:2016
DIN EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007); English version of DIN EN ISO 14577-4:2007-08
DIN EN ISO 105-Z02:1995-12 Textiles - Tests for colour fastness - Part Z02: Colour fastness of metals in the dyebath: Iron and copper (ISO 105-Z02:1993); German version EN ISO 105-Z02:1995
DIN EN ISO 105-Z01:1995-12 Textiles - Tests for colour fastness - Part Z01: Colour fastness to metals in the dyebath: Chromium salts (ISO 105-Z01:1993); German version EN ISO 105-Z01:1995
DIN EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016); German version EN ISO 14577-4:2016
DIN EN 13523-3:2001 Coil coated metals - Test methods - Part 3: Colour difference; Instrumental comparison; German version EN 13523-3:2001
DIN 49073-1:1990 Metal boxes and boxes of isulating material for accomodation of accessories up to 16 A 250 V; main dimensions
DIN EN ISO 376:2011-09 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011); German version EN ISO 376:2011 / Note: DIN EN ISO 376 (2005-02) remains valid alongside this standard until 2011-12-31.
DIN 50158-1:2008 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 1: Test method
DIN 50157-1:2008 Metallic materials - Hardness testing with portable measuring instruments operating with mechanical penetration depth - Part 1: Test method
DIN 58952-3:1977 Sterilization; packing materials for sterilizing goods, instrument trays made of metal

National Metrological Verification Regulations of the People's Republic of China, metal bath

JJG(交通) 027-2015 Water Transport Engineering.Nonmetal Ultrasonic Detector
JJG 988-2004 Vertical Metal Tank Diametrical Deviation Measuring Instrument
JJG(交通) 027-2004 Water Transport Engineering-Nonmetal Ultrasonic Detector
JJG 027-2015 Non-metallic acoustic wave detector for water transport engineering

Professional Standard - Traffic, metal bath

JT/T 576-2015 Water transport engineering.Nonmetal ultrasonic detector
JT/T 576-2004 Water transport engineering.Nonmetal ultrasonic detector

Professional Standard - Petroleum, metal bath

SY/T 6368-1998 Detector on buried metal pipelines anti-corrosion coating faults
SY 6368-1998 Underground metal pipeline anti-corrosion layer leak detector
SY/T 5204-1997 General technical condition of metal heat-insulated flask of petroleum downhole tool

Group Standards of the People's Republic of China, metal bath

T/CSTM 00900-2023 Calibration specification for food heavy metal analyzer
T/QGCML 159-2021 Calibration method of helmet splash resistance molten metal splash tester

SE-SIS, metal bath

SIS SS IEC 250:1982 Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
SIS SS IEC 248:1988 Nuclear instrumen ta tion — Dimensions of planchets usedin nuclear electronic instruments

Professional Standard - Geology, metal bath

DZ/T 0101.9-1994 Geological instruments and meters manufacturing time quota non-ferrous metal casting

Professional Standard-Ships, metal bath

CB 1085.1-1989 Non-ferrous metal sand casting with man-hour quota for instrumentation manufacturing

International Organization for Standardization (ISO), metal bath

ISO 4518:1980 Metallic coatings; Measurement of coating thickness; Profilometric method
ISO 105-Z01:1993 Textiles; tests for colour fastness; part Z01: colour fastness to metals in the dye-bath; chromium salts
ISO 105-Z02:1993 Textiles; tests for colour fastness; part Z02: colour fastness to metals in the dye-bath; iron and copper
ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 14577-4:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
ISO 14556 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
ISO 1797-1:2011 Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals
ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 14556:2015 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method
ISO 376:1999 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines

KR-KS, metal bath

KS K ISO 105-Z01-2015 Textiles－Tests for colour fastness－Part Z01：Colour fastness to metals in the dye-bath：Chromium salts
KS K ISO 105-Z02-2015 Textiles－Tests for colour fastness－Part Z02：Colour fastness to metals in the dye-bath：Iron and copper
KS K ISO 105-Z01-2021 Textiles — Tests for colour fastness —Part Z01: Colour fastness to metals in the dye-bath:Chromium salts
KS K ISO 105-Z02-2021 Textiles — Tests for colour fastness —Part Z02: Colour fastness to metals in the dye-bath:Iron and copper

未注明发布机构, metal bath

BS EN ISO 105-Z01:1996(1999) Textiles — Tests for colour fastness — Part Z01 : Colour fastness to metals in the dye - bath : Chromium salts
BS EN ISO 105-Z02:1996(1999) Textiles — Tests for colour fastness — Part Z02 : Colour fastness to metals in the dyebath — Iron and copper

British Standards Institution (BSI), metal bath

BS EN ISO 14577-4:2007 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN ISO 105-Z01:1996 Textiles. Tests for colour fastness. Colour fastness to metals in the dye-bath: chromium salts
BS EN ISO 1797-1:2011 Dentistry. Shanks for rotary instruments. Shanks made of metals
BS EN ISO 105-Z02:1996 Textiles. Tests for colour fastness. Colour fastness to metals in the dye-bath. Iron and copper
BS EN ISO 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method
BS EN ISO 14577-4:2016 Tracked Changes. Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method for metallic and non-metallic coatings
BS EN 13523-3:2014 Coil coated metals. Test methods. Colour difference. Instrumental comparison
BS EN 13523-3:2001 Coil coated metals - Test methods - Colour difference - Instrumental comparison
BS EN 13523-3:2021 Coil coated metals. Test methods. Colour difference and metamerism. Instrumental comparison
BS EN ISO 14577-3:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-3:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Calibration of reference blocks
BS EN ISO 14577-2:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines
BS EN 60512-12-1:2006 Connectors for electronic equipment - Tests and measurements - Soldering tests - Test 12a - Solderability, wetting, solder bath method
BS EN ISO 376:2004 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
BS EN ISO 376:2011 Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
BS EN ISO 14556:2015 Metallic materials. Charpy V-notch pendulum impact test. Instrumented test method
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)

RU-GOST R, metal bath

GOST 11679.2-1976 Rubber-metal shock-absorbers for instruments. Fitting. Specifications
GOST 8.398-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for metals and alloys. Methods and means of verification
GOST 11679.1-1976 Rubber-metal shock-absorbers for instruments. Specifications
GOST 8.044-1980 State system for ensuring the uniformity of measurements. Diamond indentors of the hardness testing machines for metal and alloys. Verification methods and means
GOST 20899-1998 Metallic powders. Determination of flowability by means of a calibrated funnel (Hall flowmeter)
GOST 20899-1975 Metal powders. Method of yield determination

GOSTR, metal bath

GOST 11679.2-2019 Rubber-metal instrument shock-absorbers. Fittings. Specifications
GOST 11679.1-2018 Rubber-metal instrument shock-absorbers. Specifications

Danish Standards Foundation, metal bath

DS/EN ISO 105-Z01:1996 Textiles - Tests for colour fastness - Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
DS/EN ISO 105-Z02:1996 Textiles - Tests for colour fastness - Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
DS/EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings
DS/EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
DS/EN 13523-3:2001 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
DS/EN ISO 4518:1995 Metallic coatings - Measurement of coating thickness - Profiliometric method

Indonesia Standards, metal bath

SNI 06-6596-2001 Water treatment for metal analysis by atomic absorption spectrophotometers

National Metrological Technical Specifications of the People's Republic of China, metal bath

JJF 1090-2002 Calibration Specification for Nonmetal Building Materials Plastic Measuring Instruments
JJF 1565-2016 Calibration specification for heavy metal water quality online analyzer
JJF 2037-2023

Jilin Provincial Standard of the People's Republic of China, metal bath

DB22/T 1930-2013 Metal Rockwell Hardness Tester Depth Sounding Device Detector

BE-NBN, metal bath

NBN EN ISO 3868:1995 Metallic and other non-organic coatings - Measurement of coating thicknesses - Fizeau multiple-beam nterferometry method (ISO 3868:1976)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, metal bath

GJB 5372-2005 Metal material dynamic impact test-instrumental method

Military Standard of the People's Republic of China-General Armament Department, metal bath

GJB 8674-2015 General specification for multi-metal dewars for thermal imaging cameras

CH-SNV, metal bath

SN 210 203-1989 Technical drawings — Geometrical tolerancing Tolerancing of form, orientation, location and run-out Generalities, definitions, Symbols, indications on drawings
SN 640 673 a-1988

TR-TSE, metal bath

TS 2758-1977 TEST FOR COLOUR FASTNESS OF TEXTILES DETERMINATION OF COLOUR FASTNESS TO METALS IN THE DYE BATH CHROMIUM SALTS
TS 2759-1977 TEST FOR COLOUR FASTINESS OF TEXTILES DETERMINATION FO COLOUR FASTNESS TO METALS IN THE DYE BATH HtON AND COPPER

国家市场监督管理总局、中国国家标准化管理委员会, metal bath

GB/T 21838.4-2020 Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings
GB/T 13634-2019 Metallic materials—Calibration of force-proving instruments used for the verification of uniaxial testing machines

YU-JUS, metal bath

JUS C.A6.037-1991 Metali1c coatings. heasurement of coatlng tbickness. Profilometrlc metbo?
JUS N.R4.495-1990 Electromechanical components for electronic equipment. Test methods. Test 12a: Solderability, vvetting, solder bath method

Shandong Provincial Standard of the People's Republic of China, metal bath

DB37/T 2479-2014 Technical conditions for automatic online heavy metal monitor in water quality

CU-NC, metal bath

NC 20-28-1987 Medical Sciences Metallic Medical Instruments General Quality Specifications

European Committee for Standardization (CEN), metal bath

EN ISO 9513:2002 Metallic materials - Calibration of extensometers used in uniaxial testing ISO 9513: 1999
EN ISO 105-Z01:1995 Textiles - Tests for Colour Fastness - Part Z01 : Colour Fastness to Metals in the Dye-Bath: Chromium Salts (ISO 105-Z01 : 1993)
EN ISO 105-Z02:1995 Textiles - Tests for Colour Fastness - Part Z02: Colour Fastness to Metals in the Dyebath: Iron and Copper (ISO 105-Z02 : 1993)
EN ISO 376:2002 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines ISO 376: 1999; Supersedes EN 10002-3: 1994
EN ISO 4518:2021 Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:2021)
CEN EN 13523-3-2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison
EN 13523-3:2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison
EN ISO 9513:2012/AC:2013 Metallic materials - Calibration of extensometer systems used in uniaxial testing - Technical Corrigendum 1 (ISO 9513:2012/Cor 1:2013)
EN 13523-3:2021 Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
EN ISO 376:2004 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines ISO 376:2004
EN ISO 1797-1:2011 Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals

ET-QSAE, metal bath

ES A.C2.002-1973

American Society for Testing and Materials (ASTM), metal bath

ASTM E2298-18 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E2298-13a Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E2298-15 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E2298-13 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM E2298-09 Standard Test Method for Instrumented Impact Testing of Metallic Materials
ASTM E251-92(2014) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM E251-92(2009) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM B636-84(2006)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM B636-84(2001) Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM B636-84(1992)e1 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
ASTM E251-92(2003) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
ASTM G152-05 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G155-00a Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G155-00 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G155-00ae1 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G155-04 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G155-05 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G155-05a Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G155-13 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM F2401-16 Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices

Professional Standard - Tobacco, metal bath

YC/T 90.2-1996 Tobacco Machinery Metal Detectors Part 2: Specifications
YC/T 90.1-1996 Tobacco Machinery Metal Detector Part 1: Types and Basic Parameters

Lithuanian Standards Office , metal bath

LST EN ISO 14577-4:2007 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2007)
LST EN ISO 105-Z01:2000 Textiles - Tests for colour fastness - Part Z01: Colour fastness to metals in the dyebath: Chromium salts (ISO 105-Z01:1993)
LST EN ISO 105-Z02:2000 Textiles - Tests for colour fastness - Part Z02: Colour fastness to metals in the dyebath: Iron and copper (ISO 105-Z02:1993)
LST EN 13523-3-2002 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
LST EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015)

AENOR, metal bath

UNE-EN ISO 14577-4:2017 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings (ISO 14577-4:2016)
UNE-EN ISO 105-Z01:1996 TEXTILES. TESTS FOR COLOUR FASTNESS. PART Z01: COLOUR FASTNESS TO METAls in the dyebath: Chromium salts. (ISO 105-Z01:1993)
UNE-EN ISO 105-Z02:1996 TEXTILES. TESTS FOR COLOUR FASTNESS. PART Z02: COLOUR FASTNESS TO METALS IN THE DYEBATH: IRON AND COPPER. (ISO 105-Z02:1993).
UNE-EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison

The American Road & Transportation Builders Association, metal bath

AASHTO TP 65-2003 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers

Professional Standard - Ferrous Metallurgy, metal bath

YB/T 5337-2006 Determination method of metal lattice constant X-ray diffractometer method

CEN - European Committee for Standardization, metal bath

EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines

ZA-SANS, metal bath

SANS 4518:1980 Metallic coatings - Measurement of coating thickness - Profilometric method

AT-ON, metal bath

OENORM EN 13523-3-2021 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison

AASHTO - American Association of State Highway and Transportation Officials, metal bath

TP 65-2003 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers
T 337-2009 Standard Method of Test for Non-Instrumental Determination of Metallic Zinc in Zinc-Rich Primers

American National Standards Institute （ANSI), metal bath

ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

PT-IPQ, metal bath

NP EN 13523-3-2002 Coil coated metals Test methods Part 3:Colour difference-Instrumental comparison

ES-AENOR, metal bath

UNE 20-099-1990