ZH
RU
ES

Determination of polymer molecular weight and molecular weight by gpc

Determination of polymer molecular weight and molecular weight by gpc, Total:496 items.

In the international standard classification, Determination of polymer molecular weight and molecular weight by gpc involves: Protection against dangerous goods, Medical equipment, Plastics, Analytical chemistry, Products of the chemical industry, Rubber, Raw materials for rubber and plastics, Environmental protection, Paints and varnishes, Fuels, Ferrous metals, Testing of metals, Non-ferrous metals, Edible oils and fats. Oilseeds, Rubber and plastics products, Electronic components in general, Textile fibres, Insulation, Extraction and processing of petroleum and natural gas, Materials for the reinforcement of composites, Farming and forestry, Organic chemicals, Metalliferous minerals, Electrical engineering in general, Education, Measurement of fluid flow, Biology. Botany. Zoology, Insulating fluids, Animal feeding stuffs, Natural gas, General methods of tests and analysis for food products, Ferroalloys, Sugar. Sugar products. Starch, Cork and cork products, Non-textile floor coverings, Laboratory medicine, Road vehicle systems, Fertilizers, Tea. Coffee. Cocoa, Photography, Air quality, Petroleum products in general.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Determination of polymer molecular weight and molecular weight by gpc

• GB/T 27843-2011 Chemicals.Determination of the low molecular weight content of a polymer using Gel permeation chromatography (GPC)
• GB/T 31816-2015 Water treatment chemicals.Determination of the molecular weight and molecular weight distribution of polymers.Gel filtration chromatography
• GB/T 36214.4-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 4:High-temperature method
• GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
• GB/T 36214.2-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 2:Universal calibration method
• GB/T 12005.10-1992 Determination for molecular weight of polyacrylamide by viscometry
• GB/T 223.38-1985 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-gravimetric method for the determination of niobium content
• GB 223.38-1985 Chemical analysis method of iron, steel and alloy Ion exchange separation gravimetric method for determination of niobium content
• GB/T 20127.2-2006 Steel and alloy - Determination of trace element contents - Part 2: Determination of arsenic content by hydride generation-atomic fluorescence spectrometric method
• GB/T 20127.8-2006 Steel and alloy - Determination of trace element contents - Part 8: Determination of antimony content by hydride generation-atomic fluorescence spectrometric method
• GB/T 20127.10-2006 Steel and alloy.Determination of trace element contents.Part 10: Determination of selenium content by hydride generation-atomic fluorescence spectrometric method
• GB/T 15616-1995 Qantitative method for electron probe microanalysis of metals and alloys
• GB/T 15616-2008 Quantitative method for electron probe microanalysis of metals and alloys
• GB/T 6509-1986 Method for determination of low molecular weight compounds content in polyamide 6
• GB 223.46-1985 Methods for chemical analysis of iron, steel and alloys - Determination of magnesium content by atomic absorption spectrophotometry
• GB/T 20127.6-2006 Steel and alloy - Determination of trace element contents - Part 6: Determination of germanium content by gallic acid oscillopolarographic method
• GB/T 20127.12-2006 Steel and alloy.Determiantion of trace element contents.Part 12:Determination of zinc content by flame atomic absorption spectrometric method
• GB/T 6987.27-2001 Aluminium and aluminium alloys--Determination of boron content--Ion selective electrode method
• GB/T 20127.1-2006 Steel and alloy - Determination of trace element contents - Part 1: Determination of silver content by graphite furnace atomic absorption spectrometric method
• GB/T 20127.4-2006 Steel and alloy.Determination of trace element contents.Part 4:Determination of copper content by graphite furnace atomic absorption spectrometric method
• GB/T 20127.9-2006 Steel and alloy - Determination of trace element contents - Part 9: Determination of scandium content by inductively coupled plasma atomic emission spectrometric method
• GB/T 20127.11-2006 Steel and alloy - Determination of trace element contents - Part 11: Determination of indium and thallium contents by inductively coupled plasma-mass spectrometric method
• GB/T 13748.5-2005 Chemical analysis methods of magnesium and magnesium alloys.Determination of yttrium content.Inductively coupled plasma atomic emission spectrometric method
• GB/T 12689.2-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of arsenic content-The atomic fluorescence spectrometer method
• GB/T 223.53-1987 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content
• GB/T 223.54-1987 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrophotometric method for the determination of nickel content
• GB 223.53-1987 Methods for Chemical Analysis of Iron, Steel and Alloys - Determination of Copper Content by Flame Atomic Absorption Spectrophotometry
• GB 223.54-1987 Methods for Chemical Analysis of Iron, Steel and Alloys by Flame Atomic Absorption Spectrophotometry for the Determination of Nickel Content
• GB/T 43085-2023 Determination of free formaldehyde content in plastic polymer dispersions
• GB/T 20975.25-2020(英文版) Methods for chemical analysis of aluminium and aluminium alloys—Part 25：Determination of elements content—Inductively coupled plasma atomic emission spectrometric method
• GB/T 6987.17-2001 Aluminium and aluminium alloys--Determination of magnesium content--Flame atomic absorption spectrometric method
• GB/T 6987.18-2001 Aluminium and aluminium alloys--Determination of chromium content--Flame atomic absorption spectrometric method
• GB/T 6987.11-2001 Aluminium and aluminium alloys--Determination of lead content--Flame atomic absorption spectrometric method
• GB/T 6987.26-2001 Aluminium and aluminium alloys--Determination of lithium content--Flame atomic absorption spectrometric method
• GB/T 6987.21-2001 Aluminium and aluminium alloys--Determination of calcium content--Fiame atomic absorption spectrometric method
• GB/T 6987.28-2001 Aluminium and aluminium alloys--Determination of strontium content--Flame atomic absorption spectrometric method
• GB/T 6987.9-2001 Aluminium and aluminium alloys--Determination of zinc conten--Flame atomic absorption spectrometric method
• GB/T 223.77-1994 Methods for chemical analysis iron,steel and alloy.The flame atomic absorption spertrometric method for the determination of calcium content
• GB/T 13747.9-1992 Zirconium and zirconium alloys--Determination of magesium content-Flame absorzption spectrometric method
• GB/T 12689.8-1990 Zinc and zinc alloys--Determination of iron content--Flame atomic absorption spectrometric method
• GB/T 12689.11-1990 Zinc and zinc alloys--Determination of antimony content--Flame atomic absorption spectrometric method
• GB/T 12689.13-1990 Zinc and zinc alloys--Determination of aluminium content--Electrothermal atomic absorption spectrometric method
• GB/T 223.64-1988 Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrometric method for the determination of manganese content
• GB/T 223.65-1988 Methods for chemical analysis of iron, steel and alloy--The flame atomic absorption spectrometric method for the determination of cobalt content
• GB/T 223.46-1989 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrometric method for the determination of magnesium content
• GB 223.65-1988 Methods for Chemical Analysis of Iron, Steel and Alloys Flame Atomic Absorption Spectrometry Determination of Cobalt Content
• GB/T 6987.25-2001 Aluminium and aluminium alloys--Determination of cadmium content--Flame atomic absorption spectrometric method
• GB/T 12689.7-1990 Zinc and zinc alloys--Determination of magnesium content--Flame atomic absorption spectrometric method
• GB/T 12689.9-1990 Zinc and zinc alloys--Determination of copper content--Flame atomic absorption spectrometric method
• GB/T 12689.10-1990 Zinc and zinc alloys--Determination of lead content--Flame atomic absorption spectrometric method
• GB/T 12689.12-1990 Zinc and zinc alloys--Determination of cadmium content--Flame atomic absorption spectrometric method
• GB/T 13748.10-1992 Magnesium and its alloys--Determination of zinc content--Flame atomic absorption spectrometric method
• GB/T 6987.15-2001 Aluminium and aluminium alloys--Determination of nikel content--Flame atomic absorption spectrometric method
• GB/T 6987.3-2001 Aluminium and aluminium alloys--Determination of copper content--Falme atomic absorption spectrometric method
• GB/T 223.76-1994 Methods for chemical analysis iron,steel and alloy.The flame atomic absorption spertrometric method for the determination of vanadium content
• GB/T 38093-2019 Determination of the high-molecular polymers in β-lactam antibiotics—Gel chromatography
• GB/T 6509-2005 Testing method for determination of low molecular weight compounds content in chip and fibres of polycaproamide
• GB/T 20975.27-2018 Methods for chemical analysis of aluminium and aluminium alloys.Part 27:Determination of cerium, lanthanum, scandium.Inductively coupled plasma atomic emission spectrometry method
• GB/T 20127.3-2006 Steel and alloy - Determination of trace element contents - Part 3: Determination of calcium, magnesium, barium content by inductively coupled plasma atomic emission spectrometric method
• GB/T 12689.7-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of magnesium content-The flame atomic absorption spectrometric method
• GB/T 12689.3-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of cadmium content-The flame atomic absorption spectrometric method
• GB/T 13748.17-2005 Chemical analysis methods of magnesium and magnesium alloys.Determination of kalium content and natrium content.Flame atomic absorption spectrophotometric method
• GB/T 223.41-1985 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content
• GB 223.41-1985 Iron and steel and alloy chemical analysis method ion exchange separation-pyrogallol photometric determination of tantalum content
• GB/T 223.40-1985 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content
• GB/T 223.80-2007 Iron,steel and alloy-Determination of trace bismuth and arsenic contents- Hydride generation-atomic fluorescence spectrometric method
• GB/T 12689.9-2004 The methods for chemical analysis of zinc and zinc alloys-The determination of antimony content-The atomic fluorescence spectrometer and the flame atomic absorption spectrometric method
• GB/T 13747.9-2022 Methods for chemical analysis of zirconium and zirconium alloys—Part 9：Determination of magnesium content—Flame atomic absorption spectrometry and inductively coupled plasma atomic emission spectromet
• GB/T 13748.3-2005 Chemical analysis methods of magnesium and magnesium alloys.Determination of lithium content.Flame atomic absorption spectrometric method
• GB/T 13748.6-2005 Chemical analysis methods of magnesium and magnesium alloys.Determination of silver content.Flame atomic absorption spectrophotometric method
• GB/T 13748.13-2005 Chemical analysis methods of magnesium and magnesium alloys.Determination of lead content.Flame atomic absorption spectrophotometric method
• GB/T 13748.16-2005 Chemical analysis methods of magnesium and magnesium alloys.Determination of calcium content.Flame atomic absorption spectrometric method
• GB/T 4103.14-2009 Methods for chemical analysis of lead and lead alloys.Part 14:Determination of cadmium conten.Flame atomic absorption spectrophotometry
• GB/T 4103.15-2009 Methods for chemical analysis of lead and alloys.Part 15:Determination of nickel content.Flame atomic absorption spectrophotometry
• GB/T 20975.1-2007 Chemical analysis methods of aluminium and aluminium alloys Part 1: Determination of mercury content Cold atomic absorption spectrometric method
• GB/T 12689.7-2010 Methods for chemical analysis of zinc and zinc alloys—Part 7:Determination of magnesium content—Flame atomic absorption spectrometric method
• GB/T 26417-2010 Chemical analysis methods of praseodymium-neodymium alloy and the compounds.Determination of REO relative contents
• GB/T 13747.3-2020 Methods for chemical analysis of zirconium and zirconium alloys－Part 3：Determination of nickel content－Dimethyglyoxime spectrophotometry and inductively coupled plasma atomic emission spectrometry
• GB/T 20975.17-2008 Methods for chemical analysis of aluminium and aluminium alloys.Part 17:Determination of strontium content.Flame atomic absorption spectrometric method
• GB/T 20975.21-2008 Methods for chemical analysis of aluminium and aluminium alloys.Part 21:Determination of calcium content.Flame atomic absorption spectrometric method
• GB/T 20975.6-2008 Methods for chemical analysis of aluminium and aluminium alloys.Part 6:Determination of cadmium content.Flame atomic absorption spectrometric method
• GB/T 223.42-1985 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-bromopyrogallol red photometric method for the determination of tantalum content
• GB 223.42-1985 Chemical analysis method of iron, steel and alloy Ion exchange separation of bromide o Glycinol red photometric method for determination of tantalum content
• GB/T 20975.11-2008 Methods for chemical analysis of aluminium and aluminium alloys.Part 11: Determination of lead content.F1ame atomic absorption spetrometric method
• GB/T 20975.9-2008 Methods for chemical analysis of aluminium and aluminium alloys.Part9: Determination of lithium content.Flame atomic absorption spetrometric method

Professional Standard - Aerospace, Determination of polymer molecular weight and molecular weight by gpc

• QJ 1870-1990 Epoxy resin molecular weight and its distribution test method (GPC method)

国家药监局, Determination of polymer molecular weight and molecular weight by gpc

• YY/T 1678-2019 Method for detecting molecular weight and molecular weight distribution of polylactic acid and its copolymers for surgical implants

German Institute for Standardization, Determination of polymer molecular weight and molecular weight by gpc

• DIN 55674:2006 Synthetic Polymers - Determination of molecular mass and molecular mass distribution of polymers by matrix assisted laser desorption/ionization-time-of-flight-mass spectrometry
• DIN EN 12139:1999-04 Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC; German version EN 12139:1999
• DIN EN ISO 16014-5:2019-09 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019); German version EN ISO 16014-5:2019
• DIN EN ISO 10927:2018-10 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018); German version EN ISO 10927:2018
• DIN EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
• DIN EN 12139:1999 Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC; German version EN 12139:1999
• DIN EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
• DIN EN ISO 2871-1:2010-06 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010); German version EN ISO 2871-1:2010
• DIN EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012); German version EN ISO 16014-5:2012
• DIN EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011); German version EN ISO 10927:2011
• DIN EN ISO 2871-2:2010-06 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010); German version EN ISO 2871-2:2010
• DIN ISO 4576:2001 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)
• DIN EN 15023-3:2010-12 Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS); German version EN 15023-3:2010
• DIN EN 15703-2:2015-03 Copper and copper alloys - Determination of manganese content - Part 2: Flame atomic absorption spectrometric method (FAAS); German version EN 15703-2:2014
• DIN EN 15916-2:2010-12 Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS); German version EN 15916-2:2010
• DIN EN 12105:1998-10 Resilient floor coverings - Determination of moisture content of agglomerated composition cork; German version EN 12105:1998
• DIN EN 12441-3:2002 Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper; Flame atomic absorption spectrometric method; German version EN 12441-3:2001
• DIN ISO 4576:2001-03 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content) (ISO 4576:1996)
• DIN EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010); German version EN ISO 2871-1:2010

HU-MSZT, Determination of polymer molecular weight and molecular weight by gpc

• MSZ 10197-1962

American Society for Testing and Materials (ASTM), Determination of polymer molecular weight and molecular weight by gpc

• ASTM D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
• ASTM D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
• ASTM D3536-76e1 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)
• ASTM D3536-91 Standard Test Method for Molecular Weight Averages And Molecular Weight Distribution Of Polystyrene By Liquid Exclusion Chromatography (Gel Permeation Chromatography - Gpc)
• ASTM D3593-80(1986)e1 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Certain Polymers by Liquid Size-Exclusion Chromatography (Gel Permeation Chromatography GPC) Using Universal Calibration
• ASTM D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers by Light Scattering
• ASTM D2503-92(1997) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
• ASTM D2503-92(2016) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
• ASTM D2503-82(1987)e1 Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
• ASTM D4001-93(1999) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
• ASTM D4020-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
• ASTM D4020-01a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
• ASTM D4020-00a Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
• ASTM D6474-99 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
• ASTM D6474-99(2006) Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
• ASTM D6474-12 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
• ASTM D6474-19 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
• ASTM D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
• ASTM D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
• ASTM D5296-97 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
• ASTM D5296-19 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
• ASTM F648-04 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
• ASTM F648-13 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
• ASTM D6579-11(2015) Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography

RU-GOST R, Determination of polymer molecular weight and molecular weight by gpc

• GOST R 57268.1-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 1. General principles
• GOST R 57268.2-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. System calibration
• GOST R 57268.3-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 3. Low-temperature method
• GOST R 57268.4-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 4. High-temperature method
• GOST 33418-2015 Testing of chemicals of environmental hazard. Determination of the Number-Average Molecular Weight and the Molecular Weight Distribution of Polymers using Gel Permeation Chromatography
• GOST 33402-2015 Testing of chemicals of environmental hazard. Determination of the low molecular weight content of a polymer using gel permeation chromatography
• GOST R ISO 5834-4-2015 Implants for surgery. Ultra-high molecular weight polyethylene. Part 4. Oxidation index measurement method
• GOST R 56722-2015 Plastics. Thermogravimetry of polymers. Part 2. Determination of activation energy
• GOST 30351-2001 Polyamides, polyamide fibres, fabrics, films. Determination of mass fraction of residual caprolactam and low-molecular compounds and their concentration of migration in water. Methods of liquid and gas-liquid chromatography
• GOST 34247-2017 Copper concentrate. Measurement of copper and impurities weight fraction by an inductively coupled plasma atomic emission spectrometry method
• GOST R ISO 13898-2-2006 Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 2. Determination of nickel content
• GOST R ISO 13898-3-2007 Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 3. Determination of copper content
• GOST R ISO 13898-4-2007 Steel and iron. Determination of nickel, copper and cobalt contents. Inductively coupled plasma atomic emission spectrometric method. Part 4. Determination of cobalt content
• GOST 34248-2017 Copper and polymetallic ores. Measurement of copper and impurities weight fraction by an inductively coupled plasma atomic emission spectrometry method
• GOST R EN 14109-2009 Fat and oil derivatives. Fatty acid methyl esters (FAME). Determination of potassium content by atomic absorption spectrometry

Danish Standards Foundation, Determination of polymer molecular weight and molecular weight by gpc

• DS/EN 12139:1999 Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC
• DS/EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
• DS/EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
• DS/EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
• DS/EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
• DS/EN 12105:1999 Resilient floor coverings - Determination of moisture content of agglomerated composition cork

Lithuanian Standards Office , Determination of polymer molecular weight and molecular weight by gpc

• LST EN 12139-2002 Surface active agents - Determination of the total polyethylene glycol content of non-ionic surface active agents (EO adducts) by HPLC/GPC
• LST EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012)
• LST EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
• LST EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)
• LST EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)
• LST EN 12105-2002 Resilient floor coverings - Determination of moisture content of agglomerated composition cork
• LST EN 62321-3-2-2014 Determination of certain substances in electrotechnical products - Part 3-2: Screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography (IEC 62321-3-2:2013)

Military Standard of the People's Republic of China-General Armament Department, Determination of polymer molecular weight and molecular weight by gpc

• GJB 1965-1994 Determination of molecular weight and molecular weight distribution of hydroxyl-terminated polybutadiene by gel permeation chromatography
• GJB 950.1A-2021 Analysis methods of trace elements of precious metals and their alloys Part 1: Determination of trace amounts of lead, antimony, bismuth, iron, zinc and cadmium in gold and gold alloys, silver and silver alloys and palladium alloys by inductively coupled
• GJB 8781.9-2015 Methods for trace element analysis of high-temperature alloys Part 9: Determination of antimony content by hydride generation-atomic fluorescence spectrometry
• GJB 8781.12-2015 Methods for trace element analysis of high-temperature alloys Part 12: Determination of tellurium content by hydride generation-atomic fluorescence spectrometry
• GJB 8781.2-2015 Methods for trace element analysis of high-temperature alloys Part 2: Determination of bismuth content by hydride generation-atomic fluorescence spectrometry

Professional Standard - Petrochemical Industry, Determination of polymer molecular weight and molecular weight by gpc

• SH/T 1759-2007 Determinaaonof the molecular.mass distribution of solution polpners by gel permeation chromatography
• SH/T 0108-1992 Determination of average molecular weight and molecular weight distribution of certain polymeric additives (Size Exclusion Chromatography)
• SH/T 0169-1992 Methods of measurement for the average molecular weight of mineral insulating oil (depression of freezing point)

GOSTR, Determination of polymer molecular weight and molecular weight by gpc

• GOST R 57268.5-2016 Polymer composites. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Part 5. Method using light-scattering detection
• GOST R 57748-2017 Composite polymers. Method for in situ determination of polymer network parameters of cross-linked ultra high molecular weight polyethylene in solvent

AENOR, Determination of polymer molecular weight and molecular weight by gpc

• UNE-EN 12139:1999 SURFACE ACTIVE AGENTS - DETERMINATION OF THE TOTAL POLYETHYLENE GLYCOL CONTENT OF NON-IONIC SURFACE ACTIVE AGENTS (EO ADDUCTS) BY HPLC/GPC
• UNE-EN ISO 16014-5:2013 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection (ISO 16014-5:2012)
• UNE-EN ISO 10927:2012 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
• UNE-EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)
• UNE-EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)
• UNE 81569:1991 AIR QUALITY. WORKPLACE ATMOSPHERES. DETERMINATION OF METALLIC LEAD AND THEIR IONIC COMPOUNDS. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD.
• UNE-EN 12105:1999 RESILIENT FLOOR COVERINGS. DETERMINATION OF MOISTURE CONTENT OF AGGLOMERATED COMPOSITION CORK.

国家市场监督管理总局、中国国家标准化管理委员会, Determination of polymer molecular weight and molecular weight by gpc

• GB/T 36214.1-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles
• GB/T 36214.3-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method
• GB/T 36214.5-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection
• GB/T 39560.5-2021 Determination of certain substances in electrical and electronic products—Part 5: Cadmium，lead and chromium in polymers and electronics and cadmium and lead in metals by AAS，AFS，ICP-OES and ICP-MS
• GB/T 39285-2020 Method for chemical analysis of palladium compounds—Determination of chlorine content—Ion chromatography
• GB/T 39715.3-2021 Plastics—Biobased content—Part 3:Determination of biobased synthetic polymer content
• GB/T 4103.17-2018 Method for chemical analysis of lead and lead alloys—Part 17: Determination of sodium, magnesium contents—Flame atomic absorption spectrometry
• GB/T 223.89-2019 Iron, steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method
• GB/T 20975.25-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 25：Determination of elements content—Inductively coupled plasma atomic emission spectrometric method
• GB/T 6609.1-2018 Chemical analysis methods and determination of physical performance of alumina—Part 1：Determination of trace elements content—Inductively coupled plasma atomic emission spectrometry method
• GB/T 13747.7-2019 Methods for chemical analysis of zirconium and zirconium alloys—Part 7：Determination of manganese content—Patassium periodate spectrometry and inductively coupled plasma atomic emission spectrometry
• GB/T 20975.28-2019 Methods for chemical analysis of aluminium and aluminium alloys—Part 28:Determination of cobalt content—Flame atomic absorption spectrometry
• GB/T 20975.34-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 34：Determination of sodium content—Flame atomic absorption spectrometric method
• GB/T 20975.33-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 33：Determination of potassium content—Flame atomic absorption spectrometric method
• GB/T 20975.9-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 9:Determination of lithium content—Flame atomic absorption spectrometry
• GB/T 20975.36-2020 Methods for chemical analysis of aluminium and aluminium alloys—Part 36:Determination of silver content—Flame atomic absorption spectrometry

British Standards Institution (BSI), Determination of polymer molecular weight and molecular weight by gpc

• BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
• BS ISO 16014-1:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. General principles
• BS EN ISO 10927:2011 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
• BS EN ISO 10927:2018 Plastics. Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
• BS ISO 16014-4:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. High-temperature method
• BS ISO 16014-3:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Low-temperature method
• BS ISO 16014-1:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. General principles
• BS EN ISO 16014-5:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Light-scattering method
• BS EN ISO 16014-5:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Method using light-scattering detection
• BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
• BS ISO 16014-2:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Universal calibration method
• BS ISO 19929:2017 Plastics. Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
• BS ISO 11344:2004 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
• BS ISO 11344:2016 Rubber, raw synthetic. Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
• BS 4325-1:1978 Methods for analysis of oilseed residues - Determination of moisture and volatile matter content
• BS ISO 5834-4:2005 Implants for surgery - Ultra-high molecular weight polyethylene - Oxidation index measurement method
• BS EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Cationic-active matter of low molecular mass (between 200 and 500)
• BS EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - High-molecular-mass cationic-active matter
• BS ISO 4765:2022 Chemically-induced ultraweak photon emission (UPE). Measurement as an analysis method of degradation of polymeric material
• BS EN 62321-3-2:2014 Determination of certain substances in electrotechnical products. Screening. Total bromine in polymers and electronics by Combustion. Ion Chromatography
• DD CEN/TS 15022-4:2006 Copper and copper alloys — Determination of tin content — Part 4: Medium tin content — Flame atomic absorption spectrometry method (FAAS)
• BS EN 12441-6:2003 Zinc and zinc alloys - Chemical analysis - Determination of aluminium and iron - Flame atomic absorption spectrometric method
• BS 6829-4.2:1989 Analysis of surface active agents (raw materials). Ethylene oxide adducts. Method for determination of polyethylene glycols and non-ionic active matter contents
• DD CEN/TS 15023-3:2006 Copper and copper alloys — Determination of nickel content — Part 3: Flame atomic absorption spectrometry method (FAAS)
• BS EN 12947:2000 Liming materials - Determination of magnesium content - Atomic absorption spectrometric method
• BS ISO 5834-4:2019 Tracked Changes. Implants for surgery. Ultra-high-molecular-weight polyethylene. Oxidation index measurement method
• BS ISO 15373:2001 Plastics - Polymer dispersions - Determination of free formaldehyde
• BS 3762-3.1:1990 Analysis of formulated detergents. Quantitative test methods. Method for determination of anionic-active matter content
• PD ISO/TS 16393:2019 Molecular biomarker analysis. Determination of the performance characteristics of qualitative measurement methods and validation of methods
• BS 3727-16:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of combined and free magnesium
• 21/30423455 DC BS ISO 4765. Chemically Induced UPE (ultra-weak photon emission). Measurement as an analysis method of degradation of polymeric material

BE-NBN, Determination of polymer molecular weight and molecular weight by gpc

• NBN I-879-1968

Professional Standard - Agriculture, Determination of polymer molecular weight and molecular weight by gpc

• 240药典 三部-2020 Assay method 3119 polymer conjugate assay method
• 213药典 四部-2015 3100 assay method 3119 polymer conjugate assay method
• 201药典 四部-2020 3100 assay method 3119 polymer conjugate assay method
• 221药典 三部-2015 Assay method 3119 General rules of polymer conjugate assay method 60
• 222药典 三部-2010 Appendix Ⅷ ⅧL Determination of Polymer Conjugate Content
• 665药典 第一增补本-2010 Three-Part Revised Appendices Appendix VIII L Determination of Polymer Conjugate Content

农业农村部, Determination of polymer molecular weight and molecular weight by gpc

• NY/T 1860.35-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 35: Determination of Polymer Molecular Weight and Molecular Weight Distribution (Gel Permeation Chromatography)
• NY/T 1860.36-2016 Test Guidelines for Determination of Physical and Chemical Properties of Pesticides Part 36: Determination of Low Molecular Weight Components of Polymers (Gel Permeation Chromatography)

International Organization for Standardization (ISO), Determination of polymer molecular weight and molecular weight by gpc

• ISO 16014-1:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles
• ISO 16014-4:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
• ISO 16014-3:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
• ISO 16014-1:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles
• ISO 16014-5:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method
• ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
• ISO 16014-1:2003 Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
• ISO 16014-2:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
• ISO 4576:1978 Plastics; Aqueous dispersions of homopolymers and copolymers; Determination of gross particle content by sieve analysis
• ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
• ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
• ISO 11344:2004 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
• ISO 11344:2016 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography
• ISO 19929:2017 Plastics - Determination of average molecular mass and mixture ratio of poly(ethylene glycol) and its derivatives by MALDI-TOF-MS
• ISO 16014-1:2003/Cor 1:2005 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles; Technical Corrigendum 1
• ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
• ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
• ISO 5834-4:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 4: Oxidation index measurement method
• ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
• ISO 2871-1:1988 Surface active agents; detergents; determination of cationic-active matter content; part 1: high-molecular-mass cationic-active matter
• ISO 11344:2004/Cor 1:2008 Rubber, raw synthetic - Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography; Technical Corrigendum 1
• ISO 16620-3:2015 Plastics - Biobased content - Part 3: Determination of biobased synthetic polymer content
• ISO 5834-4:2019 Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 4: Oxidation index measurement method
• ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
• ISO 2871-2:1990 Surface active agents; detergents; determination of cationic-active matter content; part 2: cationic active matter of low molecular mass (between 200 and 500)
• ISO 5834-5:2005 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 5: Morphology assessment method
• ISO 6464:1983 Animal and vegetable fats and oils; Determination of gallates content; Molecular absorption spectrometric method
• ISO 665:1977 Oilseeds — Determination of moisture and volatile matter content
• ISO 9388:1992 Nickel alloys; determination of phosphorus content; molybdenum blue molecular absorption spectrometric method
• ISO 4765:2022 Chemically-induced ultra-weak photon emission (UPE) — Measurement as an analysis method of degradation of polymeric material
• ISO/DIS 2611-1 Analysis of natural gas — Biomethane — Determination of halogenated compounds — Part 1: HCl and HF content by ion chromatography
• ISO 13899-2:2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of Nb content
• ISO/TS 13899-1:2004 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 1: Determination of Mo content
• ISO 4576:1996 Plastics - Polymer dispersions - Determination of sieve residue (gross particle and coagulum content)
• ISO/TS 16393:2019 Molecular biomarker analysis — Determination of the performance characteristics of qualitative measurement methods and validation of methods
• ISO/TS 13899-3:2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 3: Determination of W content
• ISO/CD TS 20224-11:2004 Molecular biomarker analysis — Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR — Part 11: Pigeon DNA detection method
• ISO/DTS 20224-11:2023 Molecular biomarker analysis — Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR — Part 11: Pigeon DNA detection method
• ISO 6490-2:1983 Animal feeding stuffs; Determination of calcium content; Part 2 : Atomic absorption spectrometric method

TH-TISI, Determination of polymer molecular weight and molecular weight by gpc

• TIS 2250.3-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 3: low.temperature method
• TIS 2250.4-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 4: high.temperature method
• TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles
• TIS 2250.2-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 2: universal calibration method
• TIS 1762.1-1999 Surface active agents.detergents.determination of cationic-active matter content.part 1: high-molecular-mass cationic-active matter
• TIS 1762.2-1999 Surface active agents.detergents.determination of cationic-active matter content.part 2 : cationic-active matter of low molecular mass (between 200 and 500)

Japanese Industrial Standards Committee (JISC), Determination of polymer molecular weight and molecular weight by gpc

• JIS K 7252-1:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
• JIS K 7252-1:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
• JIS K 6828-3:2003 Plastics -- Polymer dispersions -- Determination of sieve residue (gross particle and coagulum content)
• JIS K 7252-5:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection
• JIS K 7252-3:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
• JIS K 7252-4:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
• JIS K 7252-3:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
• JIS K 7252-4:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
• JIS K 7252-2:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
• JIS K 7252-2:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method

Association Francaise de Normalisation, Determination of polymer molecular weight and molecular weight by gpc

• NF EN ISO 16014-5:2019 Plastiques - Détermination de la masse moléculaire moyenne et de la distribution des masses moléculaires de polymères par chromatographie d'exclusion stérique - Partie 5 : méthode par diffusion lumineuse
• NF T30-711:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
• NF T51-240-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5 : method using light-scattering method.
• NF EN ISO 10927:2018 Plastiques - Détermination de la masse moléculaire et de la distribution des masses moléculaires des polymères par spectrométrie de masse, à temps de vol, après désorption/ionisation laser assistée par matrice (SM-MALDI-TOF)
• NF A06-653:1993 Chemical analysis of titanium and titanium alloys. Determination of iron content. Molecular absorption spectrometry method.
• NF T51-241:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
• NF S94-060-4:2005 Implants for surgery - Ultra-high molecular weight polyethylene - Part 4 : oxidation index measurement method.
• NF T51-241:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
• NF T73-320-1*NF EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1 : high-molecular-mass cationic-active matter.
• NF T73-320:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 1 : high-molecular-mass cationic-active matter.
• XP CEN/TS 14577:2004 Matériaux et objets en contact avec les denrées alimentaires - Matières plastiques - Additifs polymériques - Méthode d'essai pour la détermination de la fraction massique d'un additif polymérique de masse moléculaire inférieure à 1000 daltons
• NF S94-060-4*NF ISO 5834-4:2019 Implants for surgery - Ultra-high-molecular-weight polyethylene - Part 4 : oxidation index measurement method
• NF T73-320-2*NF EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2 : cationic-active matter of low molecular mass (between 200 and 500).
• NF EN ISO 665:2020 Graines oléagineuses - Détermination de la teneur en eau et en matières volatiles
• NF ISO 5834-4:2019 Implants chirurgicaux - Polyéthylène à très haute masse moléculaire - Partie 4 : méthode de mesurage de l'indice d'oxydation
• NF T73-321:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 2 : cationic-active matter of low molecular mass (between 200 and 500).
• NF EN 13366:2001 Engrais - Traitement avec une résine échangeuse d'ions cationique pour la détermination de la teneur en oligo-éléments chélatés et de la fraction chélatée des oligo-éléments
• NF C05-100-3-2*NF EN 62321-3-2:2014 Determination of certain substances in electrotechnical products - Part 3-2 : screening - Total bromine in polymers and electronics by Combustion - Ion Chromatography
• NF A08-651:1993 Chemical analysis of titanium and aluminium alloys. Determination of elements contents in low content in the TA6V alloy. Method by flame atomic absorption spectrometry or by plasma emission spectrometry.
• NF V04-284*NF ISO 2962:2010 Cheese and processed cheese products - Determination of total phosphorus content - Molecular absorption spectrometric method
• NF V18-108:1984 Animal feeding stuffs. Determination of calcium content. Atomic absorption spectrometric method.
• XP CEN/TS 17790:2022 Engrais organo-minéraux - Détermination de la teneur en oligo-éléments chélatés et de la fraction chélatée d'oligo-éléments par traitement avec une résine échangeuse de cations
• XP U42-764*XP CEN/TS 17790:2022 Organo-mineral fertilizers - Determination of the chelated micronutrient content and the chelated fraction of micronutrients by treatment with a cation exchange resin
• NF V05-225*NF ISO 11292:1995 Instant coffee. Determination of free and total carbohydrate contents. Method using high-performance anion-exchange chromatography.
• XP ISO/TS 16393:2019 Analyse de biomarqueurs moléculaires - Détermination des caractéristiques de performance des méthodes de mesure qualitatives et validation des méthodes
• NF T60-222-3*NF ISO 10540-3:2003 Animal and vegetable fats and oils - Determination of phosphorus content - Part 3 : method using inductively coupled plasma (ICP) optical emission spectrometry
• NF A08-908*NF ISO 7530-8:2007 Nickel alloys - Flame atomic absorption spectrometric analysis - Part 8 : determination of silicon content.
• NF A08-909*NF ISO 7530-9:2007 Nickel alloys - Flame atomic absorption spectrometric analysis - Part 9 : determination of vanadium content
• NF A08-902:1991 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 2 : determination of cobalt content.

ES-UNE, Determination of polymer molecular weight and molecular weight by gpc

• UNE-EN ISO 16014-5:2020 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
• UNE-EN ISO 10927:2019 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018)
• UNE-EN 15024-2:2018 Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometric method (FAAS)

KR-KS, Determination of polymer molecular weight and molecular weight by gpc

• KS M ISO 11344-2017 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
• KS P ISO 5834-4-2022 Implants for surgery — Ultra-high molecular weight polyethylene — Part 4: Oxidation index measurement method
• KS D ISO 11438-4-2012 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 4：Determination of tin content
• KS D ISO 11438-3-2012 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 3：Determination of antimony content
• KS M ISO 2066-2020 Resilient floor coverings — Determination of moisture content of agglomerated composition cork
• KS D ISO 11438-2-2012 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 2：Determination of lead content
• KS D ISO 11438-7-2012 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 7：Determination of silver content

Korean Agency for Technology and Standards (KATS), Determination of polymer molecular weight and molecular weight by gpc

• KS M ISO 11344-2017(2022) Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
• KS M ISO 11344:2007 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
• KS M ISO 11344:2017 Rubber, raw synthetic－Determination of the molecular－mass distribution of solution polymers by gel permeation chromatography
• KS P ISO 5834-4:2007 Implants for surgery－Ultra-high molecular weight polyethylene－Part 4：Oxidation index measurement method
• KS M ISO 2871-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
• KS M ISO 2871-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
• KS P ISO 5834-4-2007(2017) Implants for surgery－Ultra-high molecular weight polyethylene－Part 4：Oxidation index measurement method
• KS D ISO 3256-2002(2022) Aluminum and aluminum alloys－Determination of magnesium－Atomic absorption spectrophotometric method
• KS D ISO 3256-2002(2017) Aluminum and aluminum alloys－Determination of magnesium－Atomic absorption spectrophotometric method
• KS D ISO 3980-2002(2022) Aluminium and aluminium alloys：Determination of copper content－Atomic absorption spectrophotometric method
• KS D ISO 3980-2002(2017) Aluminium and aluminium alloys：Determination of copper content－Atomic absorption spectrophotometric method
• KS M ISO 2871-2-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
• KS P ISO 5834-5:2007 Implants for surgery－Ultra-high-molecular-weight polyethylene－Part 5：Morphology assessment method
• KS P ISO 5834-5-2007(2017) Implants for surgery－Ultra-high-molecular-weight polyethylene－Part 5：Morphology assessment method
• KS M ISO 2871-2-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
• KS M ISO 2871:2007 Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
• KS D ISO 4193-2002(2017) Aluminum and aluminum alloys－Determination of chromium content－Flame atomic absorption spectrophotometric method
• KS D ISO 11436-2001(2016) Nickel and nickel alloys－Determination of total boron content －Curcumin molecular absorption spectrometric method
• KS D ISO 4193-2002(2022) Aluminum and aluminum alloys－Determination of chromium content－Flame atomic absorption spectrophotometric method
• KS D ISO 4740-2003(2013) Copper and copper alloys－Determination of zinc content－Flame atomic absorption spectrometric method
• KS D ISO 4744-2002(2017) Copper and copper alloys－Determination of chromium content－Flame atomic absorption spectrometric method
• KS D ISO 4192-2002(2017) Aluminium and aluminium alloys－Determination of lead content－Flame atomic absorption spectrometric method
• KS D ISO 4744-2002(2022) Copper and copper alloys－Determination of chromium content－Flame atomic absorption spectrometric method
• KS D ISO 13899-1-2010(2020) Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 1：Determination of Mo content
• KS D ISO 13899-3-2006(2016) Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 3：Determination of W content
• KS D ISO 9388:2012 Nickel alloys－Determination of phosphorus content－Molybdenum blue molecular absorption spectrometric method
• KS D ISO 11437-2-2012(2017) Nickel alloys－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 2：Determination of lead content
• KS D ISO 11437-2:2012 Nickel alloys-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 2:Determination of lead content
• KS D ISO 13898-3:2010 Steel and iron-Determination of nickel, copper and cobalt contents-Inductively coupled plasma atomic emission spectrometric method-Part 3:Determination of copper content
• KS D ISO 13898-4:2010 Steel and iron－Determination of nickel, copper and cobalt contents－Inductively coupled plasma atomic emission spectrometric method－Part 4：Determination of cobalt content
• KS D ISO 13898-2:2010 Steel and iron－Determination of nickel, copper and cobalt contents－Inductively coupled plasma atomic emission spectrometric method－Part 2：Determination of nickel content
• KS D ISO 13898-2-2010(2020) Steel and iron－Determination of nickel, copper and cobalt contents－Inductively coupled plasma atomic emission spectrometric method－Part 2：Determination of nickel content
• KS D ISO 13898-4-2010(2020) Steel and iron－Determination of nickel, copper and cobalt contents－Inductively coupled plasma atomic emission spectrometric method－Part 4：Determination of cobalt content
• KS D ISO 13898-3-2010(2020) Steel and iron－Determination of nickel, copper and cobalt contents－Inductively coupled plasma atomic emission spectrometric method－Part 3：Determination of copper content
• KS M ISO 2871-2:2007 Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
• KS D ISO 13899-1:2010 Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 1：Determination of Mo content
• KS D ISO 13899-2:2006 Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 2：Determination of Nb content
• KS D ISO 13899-2-2006(2016) Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 2：Determination of Nb content
• KS H ISO 11212-4-2008(2018) Starch and derived products－Heavy metals content－Part 4：Determination of cadmium content by atomic absorption spectrometry with electrothermal atomization
• KS H ISO 11212-3-2008(2018) Starch and derived products－Heavy metals content－Part 3：Determination of lead content by atomic absorption spectrometry with electrothermal atomization
• KS M ISO 2066:2020 Resilient floor coverings — Determination of moisture content of agglomerated composition cork
• KS D ISO 13899-3:2006 Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 3：Determination of W content
• KS D ISO 11400-2001(2016) Nickel, ferronickel and nickel alloys－Determination of phosphorus Content－Phosphovanadomolybdate molecular absorption spectrometric method
• KS D ISO 7530-2:2012 Nickel alloys-Flame atomic absorption spectrometric analysis-Part 2:Determination of cobalt content
• KS D ISO 7530-4:2012 Nickel alloys-Flame atomic absorption spectrometric analysis-Part 4:Determination of copper content
• KS D ISO 7530-3:2012 Nickel alloys－Flame atomic absorption spectrometric analysis－Part 3：Determination of chromium content
• KS D ISO 7530-5:2012 Nickel alloys－Flame atomic absorption spectrometric analysis－Part 5：Determination of iron content
• KS D ISO 7530-6:2012 Nickel alloys－Flame atomic absorption spectrometric analysis－Part 6：Determination of manganese content
• KS D ISO 11435-2006(2016) Nickel alloys－Determination of molybdenum－Inductively coupled plasma atomic emission spectrometric method
• KS D ISO 22033-2006(2016) Nickel alloys－Determination of niobium－Inductively coupled plasma atomic emission spectrometric method
• KS H ISO 6800-2003(2018)
• KS D ISO 11437-2-2012(2022) Nickel alloys－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 2：Determination of lead content
• KS D ISO 7530-8:2012 Nickel alloys－Flame atomic absorption spectrometric analysis－Part 8：Determination of silicon content
• KS D ISO 7530-7:2012 Nickel alloys－Flame atomic absorption spectrometric analysis－Part 7：Determination of aluminium content
• KS D ISO 7530-4-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 4：Determination of copper content
• KS D ISO 9388-2012(2017) Nickel alloys－Determination of phosphorus content－Molybdenum blue molecular absorption spectrometric method
• KS D ISO 9388-2012(2022) Nickel alloys－Determination of phosphorus content－Molybdenum blue molecular absorption spectrometric method
• KS D ISO 7530-2-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 2：Determination of cobalt content
• KS D ISO 7530-9-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 9：Determination of vanadium content
• KS D ISO 7530-7-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 7：Determination of aluminium content
• KS D ISO 7530-6-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 6：Determination of manganese content
• KS D ISO 7530-3-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 3：Determination of chromium content
• KS D ISO 7530-8-2012(2017) Nickel alloys－Flame atomic absorption spectrometric analysis－Part 8：Determination of silicon content

European Committee for Standardization (CEN), Determination of polymer molecular weight and molecular weight by gpc

• EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
• EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
• EN ISO 10927:2018 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
• EN ISO 10927:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011)
• EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
• EN ISO 665:1995 Oilseeds - Determination of Moisture and Volatile Matter Content (ISO 665 : 1977)
• EN ISO 665:2020 Oilseeds - Determination of moisture and volatile matter content (ISO 665:2020)
• PD CEN/TS 15916-1:2011 Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS)
• EN ISO 665:2000 Oilseeds - Determination of Moisture and Volatile Matter Content ISO 665:2000
• EN 15703-2:2014 Copper and copper alloys - Determination of manganese content - Part 2: Flame atomic absorption spectrometric method (FAAS)
• EN 15916-2:2010 Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS)
• EN ISO 2871-1:1994 Surface Active Agents - Detergents - Determination of Cationic-Active Matter Content - Part 1: High - Molecular-Mass Cationic-Active Matter (ISO 2871-1:1988)
• FprCEN/TS 17790-2021 Organo-mineral fertilizers - Determination of the chelated micronutrient content and the chelated fraction of micronutrients by treatment with a cation exchange resin
• EN 12947:2000 Liming materials - Determination of magnesium content - Atomic absorption spectrometric method
• EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010)

Professional Standard - Commodity Inspection, Determination of polymer molecular weight and molecular weight by gpc

• SN/T 3002-2011 Determication of relative molecular weight and molecular weight distribution of polyethylene.Gel permeation chromatography method
• SN/T 4183-2015 Determination of relative molecular weight and molecular weight distribution of polyolefins.High temperature gel permeation chromatography method
• SN/T 2815-2011 Determination of Polyoxymethylene Polyoxymethylene Extract in High Molecular Materials for Export Food Contact Materials
• SN/T 2812-2011 Determination of extracts from olefin polymers in polymer materials for export food contact materials

CZ-CSN, Determination of polymer molecular weight and molecular weight by gpc

• CSN ISO 665:1994 Oilseeds.Determination of moisture and volatile matter content.
• CSN 64 9013-1992 Aqueous dispersions of polymers and copolymers. Determination of stability of dispersion after addition of an electro- yte
• CSN ISO 5997:1993 Chromium ores and concentrates. Determination of silicon content. Molecular absorption spectrometric method and gravimetric method
• CSN ISO 4740:1992 Copper and copper alloys — Determination of zinc content — Fláme atomic absorption spectrometric method
• CSN ISO 5194:1992 Aluminium and aluminium alloys - Determination of zinc content - Flame atomic absorption apectrometric method
• CSN ISO 4744:1992 Cooper and copper alloys. Determination of chromium content. Flame atomic absorption spectrometric method
• CSN 64 9008-1986 Aqueous dispersions of homopolyntors nd copolymers. Detormination of oagulum and rough admixtures- ontent by sievo analysis
• CSN ISO 778:1994 Pulps. Determination of copper content. Extraction photometric and flame atomic absorption spectrometric methods
• CSN ISO 4749:1992 Copper alloys — Determination o? lead content — Ráme atomic absorption spectrometric method
• CSN ISO 5960:1992 Copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method

工业和信息化部, Determination of polymer molecular weight and molecular weight by gpc

• YS/T 1497-2021 Analysis method for platinum compounds Determination of impurity anion content Ion chromatography
• YS/T 1496-2021 Analysis method for palladium compounds Determination of impurity anion content Ion chromatography
• YS/T 1380-2020 Chemical analysis methods for rhodium compounds Determination of chloride ion and nitrate ion content Ion chromatography
• YS/T 1381-2020 Methods for chemical analysis of rhodium compounds - Determination of arsenic content Atomic fluorescence spectrometry
• YS/T 1262-2018 Chemical analysis methods for titanium sponge, titanium and titanium alloys. Determination of multi-element content by inductively coupled plasma atomic emission spectrometry.
• YS/T 1562.1-2022 Methods for chemical analysis of tungsten-copper alloys Part 1: Determination of copper content by iodometry and inductively coupled plasma atomic emission spectrometry

Group Standards of the People's Republic of China, Determination of polymer molecular weight and molecular weight by gpc

• T/CAMDI 076-2022 Gel chromatography method for molecular weight and distribution of polysulfone specialty for medical devices
• T/CSTM 00022-2017 Determination of antimony content in iron, steel and alloys - Hydride generation atomic absorption spectrometry
• T/CSTM 01145-2022 Zinc and zinc alloys—Determination of nickel content— Extraction separation-Flame atomic absorption spectrometric method
• T/CSTM 01144-2022 Zinc and zinc alloys—Determination of cobalt content—Extraction separation-Flame atomic absorption spectrometric method
• T/CEC 271-2019 Determination of main component content of composite insulator silicone rubber by thermogravimetric analysis

American National Standards Institute （ANSI), Determination of polymer molecular weight and molecular weight by gpc

• ANSI/ASTM D6474:1999 Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
• ANSI/ASTM D5576:2000 Classification for System and Basis for Specification of Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Materials (08.03)

Professional Standard - Petroleum, Determination of polymer molecular weight and molecular weight by gpc

• SY/T 5395-2016 Determination method for clay cation exchange capacity and base component
• SY 5395-2016 Determination method of clay cation exchange capacity and base content
• SY/T 5395-1991 Determination method of clay cation exchange capacity and base content
• SY/T 5416.2-2007 Measurement and inspection regulation of directional surveying instruments.Part 2:Electronic single-shots and mult-shots

国家食品药品监督管理局, Determination of polymer molecular weight and molecular weight by gpc

• YY/T 1507.2-2016 Determination of impurity elements in ultra-high molecular weight polyethylene powder for surgical implants Part 2: Determination of chlorine (Cl) element content by ion chromatography
• YY/T 1507.3-2016 Determination of impurity elements in ultra-high molecular weight polyethylene powder for surgical implants Part 3 Determination of calcium (Ca) element content by ICP-MS
• YY/T 1507.1-2016 Determination of impurity elements in ultra-high molecular weight polyethylene powder for surgical implants Part 1 Determination of titanium (Ti) element content by ICP-MS

Professional Standard - Electricity, Determination of polymer molecular weight and molecular weight by gpc

• DL/T 1474-2021 Measurement and evaluation method of hydrophobicity of high voltage polymer insulators for AC and DC systems

Professional Standard - Chemical Industry, Determination of polymer molecular weight and molecular weight by gpc

• HG/T 3872-2006 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
• HG/T 5335～5339-2018 Determination method of molecular sieve adsorption temperature rise, determination method of molecular sieve dusting degree, lithium low-silicon X-type molecular sieve, molecular sieve adsorbent for decarboxylation and stable isotope 15N-labeled melamine
• HG/T 4744-2014 Determination of average molecular weight and molecular weight distribution of photographic gelatin by GFC

TR-TSE, Determination of polymer molecular weight and molecular weight by gpc

• TS 3425-1979 PLASTICS-AQUEOUS DISPERSIONS OF HOMOPOLYMERS AND COPOLYMERS-DETERMINATION OF GROSS PARTICLE CONTENT BY SIEVE ANALYSIS

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Determination of polymer molecular weight and molecular weight by gpc

• GJB 950.2A-2008 Analysis methods for minor elements of precious metals and their alloys.Part 2: Determination of minor gold and iron in platinum and platinum alloys, palladium alloys by inductively coupled plasma atomic emission sPedrometric method
• GJB 950.3A-2008 Analysis methods for minor elements of precious metals and their alloys.Part 3:Determination of minor palladium ang rhodium in platinum alloys by inductively coupled plasma atomic emission spectrometric method
• GJB 950.1A-2008 Analysis methods for minor elements of precious metals and their alloys. Part 1: Determination of minor lead, antimony, bismuth, and iron in gold and gold alloys, silve and silve alloys, palladium alloys by inductively coupled plasma atomic emission spect
• GJB 5404.2-2005 Analysis methods for trace elements in super alloys. Part 2: Determination of bismuth content by hydride generation-atomic fluorescence spectrometric method
• GJB 5404.9-2005 Analysis methods for trace elements in super alloys Part 9: Determination of antimony content by hydride generation atomic fluorescence spectrometric method
• GJB 5404.12-2005 Analysis methods for trace elements in super alloys Part 12: Determination of tellurium content by hydride generation atomic fluorescence spectrometric method

国家能源局, Determination of polymer molecular weight and molecular weight by gpc

• SY/T 5416.2-2016 Measurement and inspection of directional well measuring instruments Part 2: Electronic single and multi-point type

YU-JUS, Determination of polymer molecular weight and molecular weight by gpc

• JUS C.A1.609-1979 Methods for chemical analysis of copper and copper alloys. Determination of kad by atomic absorption
• JUS C.A1.630-1987 Copper and copper alloys. Determination of tin content (Low contents). Flame atomic absorption spec-trometric method
• JUS C.A1.610-1979 Methods for chemical anafysis of copper and copper alloys. Determination of aluminium by atomic absorption

TN-INNORPI, Determination of polymer molecular weight and molecular weight by gpc

• NT 70.07-1983
• NT 70.13-1983

PL-PKN, Determination of polymer molecular weight and molecular weight by gpc

• PN C89421-1991 Aqueous dispersions of polymers and copolymers. Determination of gross particle content by sieve analysis
• PN Z04216-02-1991 Air purity protection Tests for silver and its compounds content Determination of silver and its compounds in work places by flame atomie absorption spectrometry

Indonesia Standards, Determination of polymer molecular weight and molecular weight by gpc

• SNI 7628.4-2011 Seed testing of forestry plants - Part 4: Determination of weight

Taiwan Provincial Standard of the People's Republic of China, Determination of polymer molecular weight and molecular weight by gpc

• CNS 7915-1981 Average Molecular Weight of Fatty Quaternary Ammonium Chlorides

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Determination of polymer molecular weight and molecular weight by gpc

• GB/T 13747.20-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 20：Determination of hafnium content—Inductively coupled plasma atomic emission spectrometry
• GB/T 4698.28-2017 Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 28：Determination of ruthenium content—Inductively coupled plasma atomic emission spectrometry
• GB/T 4698.27-2017 Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 27：Determination of neodymium content—Inductively coupled plasma atomic emission spectrometry
• GB/T 4698.13-2017 Methods for chemical analysis of titanium sponge,titanium and titanium alloys—Part 13：Determination of zirconium content—EDTA complexometric titration and inductively coupled plasma atomic emission spectrometry
• GB/T 4698.8-2017 Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 8：Determination of aluminum content—Separation with sodium hydroxide-EDTA complex-metric titration and inductively coupled plasma atomic emission spectrometry
• GB/T 15076.5-2017 Methods for chemical analysis of tantalum and niobium—Part5:Determination of molybdenum and tungsten contents—Inductively coupled plasma atomic emission spectrometry
• GB/T 4698.9-2017 Methods for chemical analysis of titanium sponge,titanium and titanium alloys—Part 9：Determination of tin content—Potassium iodate titration and inductively coupled plasma atomic emission spectrometry
• GB/T 13747.25-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 25：Determination of niobium content—2-(5-bromo-2-pyridylazo)-5-diethylam inophenol spectrophotometry and inductively coupled plasma atomic emission spectrometry

Professional Standard - Recommended Standards for Engineering Construction, Determination of polymer molecular weight and molecular weight by gpc

• CECS 306-2012 Construction and acceptance regulations of ultra-high molecular weight polyethylene steel skeleton composite pipe pipeline

Professional Standard - Medicine, Determination of polymer molecular weight and molecular weight by gpc

• YY/T 0813-2010 Standard test method for in situ determination of network parameters of crosslinked ultra high molecular weight polyethylene( UHMWPE)
• YY/T 1507.4-2016 Determination the content of impurity element in the implant for surgery ultra-high molecular weight polyethylene powder.Part 4:Determination of aluminum by ICP-MS
• YY/T 0772.4-2009 Implants for surgery Ultra-high-molecular-weight polyethylene.Part 4:Oxidation index measurement method
• YY/T 0772.4-2022 Surgical Implants Ultra High Molecular Weight Polyethylene Part 4: Oxidation Index Test Method
• YY/T 0815-2010 Standard test method for measurement of enthalpy of fusion, percent crystallinity ，and melting point of ultra-high-molecular weight polyethylene by means of differential scanning calorimetry

Professional Standard - Education, Determination of polymer molecular weight and molecular weight by gpc

• JY/T 0588-2020 General Rules for Determination of Crystal and Molecular Structure of Small Molecular Compounds by Single Crystal X-ray Diffraction
• JY/T 008-1996 General Rules for Determination of Crystal and Molecular Structure of Small Molecular Compounds by Four-Circle Single Crystal X-ray Diffractometer

RO-ASRO, Determination of polymer molecular weight and molecular weight by gpc

• STAS 7459-1966
• STAS SR ISO 7530-4:1995 Nickel alloys. Flame atomic absorption spectrometric analysis. Part 4; Determination of copper content

IN-BIS, Determination of polymer molecular weight and molecular weight by gpc

• IS 8543 Pt.1/Sec.1-1978
• IS 12756-1989

VN-TCVN, Determination of polymer molecular weight and molecular weight by gpc

• TCVN 6764-2000 Animal and vegetable fats and oils.Determination of gallates content.Molecular absorption spectrometric method
• TCVN 4801-1989 Oilseed residues.Determination of moisture and volatile matter content

Professional Standard - Aviation, Determination of polymer molecular weight and molecular weight by gpc

• HB 7716.14-2002 Spectrometric analysis of titanium alloys Part 14:Determination of yttrium content-Inductively coupled plasma atomic emission spectrometric method
• HB 6731.1-1993 Determination of Copper Content in Aluminum Alloys by Atomic Absorption Spectrometry
• HB 6731.9-1993 Determination of Chromium Content in Aluminum Alloys by Atomic Absorption Spectrometry
• HB 6731.4-1993 Determination of Lead Content in Aluminum Alloys by Atomic Absorption Spectrometry
• HB 6731.5-1993 Determination of Cadmium Content in Aluminum Alloys by Atomic Absorption Spectrometry
• HB 6731.6-1993 Determination of Iron Content in Aluminum Alloys by Atomic Absorption Spectrometry
• HB 6731.7-1993 Determination of Manganese Content in Aluminum Alloys by Atomic Absorption Spectrometry
• HB 6731.8-1993 Determination of Nickel Content in Aluminum Alloys by Atomic Absorption Spectrometry
• HB 6731.10-1993 Determination of Vanadium Content in Aluminum Alloys by Atomic Absorption Spectrometry
• HB 6731.3-1993 Determination of Zinc Content in Aluminum Alloys by Atomic Absorption Spectrometry

Professional Standard - Public Safety Standards, Determination of polymer molecular weight and molecular weight by gpc

• GA/T 200-1998 Methods of qualitative and quantitative analysis for strychnine,brucine in case samples

Yunnan Provincial Standard of the People's Republic of China, Determination of polymer molecular weight and molecular weight by gpc

• DB53/T 728-2015 Determination of Indium Content in Zinc Materials - Atomic Absorption Spectrophotometry

International Electrotechnical Commission (IEC), Determination of polymer molecular weight and molecular weight by gpc

• IEC 62321-5:2013 Determination of certain substances in electrotechnical products - Part 5: Determination of cadmium, lead, and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP- OES and ICP-MS

Association of German Mechanical Engineers, Determination of polymer molecular weight and molecular weight by gpc

• VDI 2457 Blatt 4-2000 Gaseous emission measurement - Chromatographic determination of organic compounds - Sampling of acidic components in alkaline aqueous solution; Analysis by ion chromatography

ES-AENOR, Determination of polymer molecular weight and molecular weight by gpc

• UNE 81-591-1991 Biological control. Determination of lead in blood. Extraction method. Atomic absorption spectrometry

Others:   Determination of molecular weight and molecular weight of polymers by gpc method, Determination of polymer molecular weight and molecular weight by gpc.