ZH
RU
ES

flow standard microspheres

flow standard microspheres, Total:191 items.

In the international standard classification, flow standard microspheres involves: Valves, Sports equipment and facilities, Thermodynamics and temperature measurements, Road engineering, Soil quality. Pedology, Protective equipment, Water quality, Kitchen equipment, Veterinary medicine, Document imaging applications, Bearings, Analytical chemistry, Testing of metals, Mechanical testing, Adhesives, Measurement of volume, mass, density, viscosity, Aerospace fluid systems and components, Vocabularies, Lubricants, industrial oils and related products, Non-destructive testing, Equipment for petroleum and natural gas industries, Industrial furnaces, Products of the textile industry, Refractories, Road vehicle systems, Electrical accessories, Inks. Printing inks, Metalliferous minerals, Electronic components in general, Electricity. Magnetism. Electrical and magnetic measurements, Protection against fire, Construction materials, Petroleum, petroleum products and natural gas handling equipment, Plastics, Fuels, Applications of information technology, Audio, video and audiovisual engineering, Microbiology.

American Society for Testing and Materials (ASTM), flow standard microspheres

ASTM D7971-15 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM F1985-99(2019)e1 Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves
ASTM F2056-00 Standard Safety and Performance Specification for Soccer Goals
ASTM F2950-14 Standard Safety and Performance Specification for Soccer Goals
ASTM F2950-14(2021) Standard Safety and Performance Specification for Soccer Goals
ASTM F2056-09 Standard Safety and Performance Specification for Soccer Goals
ASTM C1130-07(2012) Standard Practice for Calibrating Thin Heat Flux Transducers
ASTM D7681-11 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM F2673-08 Standard Safety Specification for Special Tip-Resistant Movable Soccer Goals
ASTM E1197-12 Standard Guide for Conducting a Terrestrial Soil-Core Microcosm Test
ASTM F2439-06 Standard Specification for Headgear Used in Soccer
ASTM F2439-06(2011) Standard Specification for Headgear Used in Soccer
ASTM D5981-96(2002) Standard Guide for Calibrating a Ground-Water Flow Model Application
ASTM D5981-96(2008) Standard Guide for Calibrating a Ground-Water Flow Model Application
ASTM C1130-07 Standard Practice for Calibrating Thin Heat Flux Transducers
ASTM F1496-13 Standard Test Method for Performance of Convection Ovens
ASTM F1496-12 Standard Test Method for Performance of Convection Ovens
ASTM E1263-97(2008) Standard Guide for Conduct of Micronucleus Assays in Mammalian Bone Marrow Erythrocytes
ASTM E883-11(2017) Standard Guide for Reflected–Light Photomicrography
ASTM F2443-04 Standard Specification for Roller, Bearing, Needle Ferrous, Solid, Spherical End
ASTM F2443-04(2021) Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
ASTM F2443-04(2012) Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
ASTM F1496-99 Standard Test Method for Performance of Convection Ovens
ASTM F1496-99(2005)e1 Standard Test Method for Performance of Convection Ovens
ASTM E145-94(2006) Standard Specification for Gravity-Convection And Forced-Ventilation Ovens
ASTM E145-94(2011) Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
ASTM D7969-16 Standard Specification for Gravity Convection and Forced Ventilation Ovens
ASTM D796-87a Standard Specifications for Gravity Convection and Forced Draft Ovens
ASTM D7681-11(2021) Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM A966/A966M-08 Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
ASTM A966/A966M-08(2012) Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
ASTM D7971-20 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM E436-03 Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM G133-02 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
ASTM G133-05 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
ASTM D1875-03(2018) Standard Test Method for Density of Adhesives in Fluid Form
ASTM E2509-08 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM E2509-21 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode
ASTM F312-08(2023) Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
ASTM D5719-13 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes
ASTM D6161-98 Standard Terminology Used for Crossflow Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes
ASTM D7690-11 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
ASTM E1629-12 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes
ASTM D7681-11(2016)e1 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D7681-11(2016) Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D5513-99(2009) Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM D5513-22 Standard Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis
ASTM D3512/D3512M-10e1 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
ASTM D3511/D3511M-13 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D3512/D3512M-10e2 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
ASTM D3511/D3511M-10e1 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D3511/D3511M-15 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D5513-99 Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM D5513-99(2004) Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM D3907/D3907M-19 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM F2553-16 Standard Specification for Warnings on Refillable CO2 Cylinders Used In the Sport of Paintball
ASTM D3907-03 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D3907-03(2008) Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM F312-08 Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
ASTM C1446-07e1 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
ASTM D3511-07 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D3511-05 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM D3511-07a Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
ASTM E3060-16 Standard Guide for Subvisible Particle Measurement in Biopharmaceutical Manufacturing Using Dynamic (Flow) Imaging Microscopy
ASTM D7650-10 Standard Test Method for Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
ASTM D3907-92 Standard Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test (Withdrawn 2001)
ASTM D3907/D3907M-13 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D5513-15 Standard Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis
ASTM C1446-07 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
ASTM D4040-10(2019) Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
ASTM E2242-02 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
ASTM E2242-12 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
ASTM E2242-13 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
ASTM E2242-12a Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
ASTM D8128-22 Standard Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings
ASTM F677-95(1999) Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications
ASTM F677-04 Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications
ASTM F677-04(2009) Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications
ASTM F677-13 Standard Test Method for Fluid and Grease Resistance of Thermoset Encapsulating Compounds Used in Electronic and Microelectronic Applications
ASTM F1796-09 Standard Specification for High Voltage Detectors8212;Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC
ASTM D6060-96(2001) Standard Practice for Sampling of Process Vents With a Portable Gas Chromatograph
ASTM E2652-16 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750&xb0;C
ASTM E2564-11 Standard Test Method for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method
ASTM D5154-10 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D4989-90a(1999)e1 Standard Test Method for the Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
ASTM D4989/D4989M-90a(2021) Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
ASTM D7284-13(2017) Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
ASTM D7284-20 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
ASTM D1238-10 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D5001-06 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D5258-02 Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
ASTM D5258-02(2007) Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
ASTM D5154/D5154M-18 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D8070-23 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D8070-19 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D8070-21 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D5154-03 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM D8070-19a Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D8070-20 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D8070-16 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D5154-05 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
ASTM C1446-99 Standard Test Method for Measuring Consistency and Working Time of Self-Flowing Castable Refractories
ASTM F1796-09(2014) Standard Specification for High Voltage Detectors—Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC
ASTM D1238-13 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D5258-02(2013) Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating
ASTM D5001-10 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D3787-07(2011) Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
ASTM E3060-23 Standard Guide for Subvisible Particle Measurement in Biopharmaceutical Manufacturing Using Dynamic (Flow) Imaging Microscopy
ASTM E2647-20 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown Using Drip Flow Biofilm Reactor with Low Shear and Continuous Flow
ASTM E2652-18 Standard Test Method for Assessing Combustibility of Materials Using a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C
ASTM D5001-03 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM D5422-09 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
ASTM D7394-18(2023) Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers

Institute of Electrical and Electronics Engineers (IEEE), flow standard microspheres

AIEE No. 12-1934 (ASA C57.1-1933) AIEE Standards for Constant Current Transformers of the Moving Coil Type
IEEE P2030.10 IEEE Approved Draft Standard for DC Microgrids for Rural and Remote Electricity Access Applications
IEEE 2030.10-2021 IEEE Standard for DC Microgrids for Rural and Remote Electricity Access Applications
IEEE Std 2030.10-2021 IEEE Standard for DC Microgrids for Rural and Remote Electricity Access Applications
ANSI/IEEE Std C37.63-1984 IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for AC Systems
IEEE Std C37.63-2005 IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for AC Systems
IEEE Std 1301.3-1992 IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled with 2.5 mm Connectors
IEEE Std 1301.1-1991 IEEE Standard for a Metric Equipment Practice for Microcomputers - Convection-Cooled With 2 Mm Connectors
IEEE P1277/D9, October 2019 IEEE Draft Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors and for Dry-Type Converter Reactors for DC Power Transmission
IEEE P1277/D10, February 2020 IEEE Draft Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors and for Dry-Type Converter Reactors for DC Power Transmission
IEEE 1277-2020 IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors and for Dry-Type Converter Reactors for DC Power Transmission
IEEE Std 1277-2020 IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors and for Dry-Type Converter Reactors for DC Power Transmission
IEEE Std C37.20.2B-1994 Supplement to IEEE standard for metal-clad and station-type cubicle switchgear: Current transformer accuracies
IEEE Approved Draft Std PC57.129/D10, Jul 07 Approved IEEE Draft Standard for General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers
IEEE PC37.63/D1, February 2011 IEEE Draft Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
IEEE PC37.63/D3, August 2012 IEEE Draft Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
IEEE PC37.63 IEEE Draft Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
IEEE PC37.63/D6, December 2012 IEEE Draft Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
IEEE PC37.63/D5, November, 2012 IEEE Draft Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
IEEE Unapproved Std PC57.129_D9, Mar07.pdf Unapproved Draft IEEE Standard General Requirements and Test Code for Oil-Immersed Hvdc Converter Transformers
IEEE Std 1277-2010 IEEE Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
IEEE PC37.62/D6.1, September 2018 IEEE Draft Standard for Pad Mounted, Dry Vault, Submersible Fault, and Overhead Fault Interrupters for alternating current systems up to 38 kV
IEEE PC37.62/D7.1, July 2020 IEEE Draft Standard for Pad Mounted, Dry Vault, Submersible Fault, and Overhead Fault Interrupters for alternating current systems up to 38 kV
IEEE Std C37.63-1997 IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault and Submersible Automatic Line Sectionalizers for AC Systems
ANSI/IEEE C37.60-1981 IEEE Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for AC Systems
IEEE Unapproved Draft Std P1277/D7, Dec 2009 IEEE Draft Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
IEEE PC37.63/D3, February 2023 IEEE Draft Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
IEEE Unapproved Draft Std P1277/D6, Nov 2009 Draft Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
IEEE Unapproved Draft Std P1277/D5, Aug 2009 Draft Standard General Requirements and Test Code for Dry-Type and Oil-Immersed Smoothing Reactors for DC Power Transmission
IEEE Std 1101.11-1998 IEEE Standard for Mechanical Rear Plug-in Units Specifications for Microcomputers Using IEEE 1101.1 and IEEE 1101.10 Equipment Practice
IEEE Std C37.62-2020 IEEE Standard for Pad-Mounted Dry Vault, Submersible, and Overhead Fault Interrupters for Alternating Current Systems Up to and Including 38 kV
IEEE Unapproved Draft Std PC37.60/D04, Jun, 2008 IEEE Draft Standard for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems up to 38 kV
IEEE Std PC37.60/Cor1/D2 Approved IEEE Draft: Standard Requirements for Overhead, Pad Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems up to 38 kV -- Corrigendum 1
SMPTE ST 396:2003 ST 396:2003 - SMPTE Standard - For Television — Packet Format and Transmission Timing of DV-Based Data Streams over IEEE 1394
ST 396:2003 ST 396:2003 - SMPTE Standard - For Television — Packet Format and Transmission Timing of DV-Based Data Streams over IEEE 1394
SMPTE ST 2020-1:2008 ST 2020-1:2008 - SMPTE Standard - Format of Audio Metadata and Description of the Asynchronous Serial Bitstream Transport
SMPTE ST 2020-1:2014 ST 2020-1:2014 - SMPTE Standard - Format of Audio Metadata and Description of the Asynchronous Serial Bitstream Transport
ST 2020-1:2008 ST 2020-1:2008 - SMPTE Standard - Format of Audio Metadata and Description of the Asynchronous Serial Bitstream Transport
ST 2020-1:2014 ST 2020-1:2014 - SMPTE Standard - Format of Audio Metadata and Description of the Asynchronous Serial Bitstream Transport
IEEE PC37.62/D7.2, August 2020 IEEE Draft Standard for Pad Mounted, Dry Vault, Submersible Fault, and Overhead Fault Interrupters for alternating current systems up to 38 kV

Professional Standard - Petroleum, flow standard microspheres

SY/T 6999-2014 General requirements for flow meters on-line verification with a traveling gas flow standard facility
SY 6999-2014 General requirements for on-line verification of flowmeters with mobile gas flow standard devices

German Institute for Standardization, flow standard microspheres

DIN ISO 22029:2014-05 Microbeam analysis - EMSA/MAS standard file format for spectral-data exchange (ISO 22029:2012)
DIN EN 60191-6-13:2017-06 Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA) (IEC 60191-6-13:2016); German version EN 60191-6-13:2016 / Note: DIN ...

CU-NC, flow standard microspheres

NC 38-02-10-1988 Food Sanitary Standards System. Qualitative Determination of Staphylococcus Aureus in Foods. Methods of Microbiological Analysis

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., flow standard microspheres

IEEE C37.20.2B SUPP-1994 Supplement to IEEE Standard for Metal-Clad and Station-Type Cubicle Switchgear: Current Transformer Accuracies
IEEE C57.129-1999 Standard General Requirements and Test Code for Oil-Immersed HVDC Converter Transformers
IEEE C37.63-2005 Standard Requirements for Overhead@ Pad-Mounted@ Dry-Vault@ and Submersible Automatic Line Sectionalizers for AC Systems
IEEE C37.63-1984 Standard Requirements for Overhead@ Pad-Mounted@ Dry Vault@ and Submersible Automatic Line Sectionalizers for AC Systems
IEEE C37.63-2013 Standard Requirements for Overhead@ Pad-Mounted@ Dry-Vault@ and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
IEEE C37.60 CORR 1-2004 Standard Requirements for Overhead@ Pad-Mounted@ Dry Vault@ and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV
IEEE C37.60-2003 Standard Requirements for Overhead@ Pad-Mounted@ Dry Vault@ and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV

British Standards Institution (BSI), flow standard microspheres

BS ISO 8820-3:2010 Road vehicles - Fuselinks - Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
20/30394911 DC BS ISO 22029. Microbeam analysis. EMSA/MAS standard file format for spectral-data exchange
BS ISO 22029:2022 Tracked Changes. Microbeam analysis. EMSA/MAS standard file format for spectral-data exchange
BS ISO 13083:2015 Surface chemical analysis. Scanning probe microscopy. Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes
BS EN 61937-10:2011 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. Non-linear PCM bitstreams according to the MPEG-4 audio lossless coding (ALS) format

Association Francaise de Normalisation, flow standard microspheres

NF EN 301442:2010 Systèmes et stations terrestres de communication par satellite (SES) - Norme harmonisée pour les stations terrestres mobiles (MES), comprenant les stations terrestres portatives, les réseaux de communications personnelles par satellite (S-PCN) opér...
NF EN 301681:2012 Systèmes et stations terriennes de communications par satellite (SES) - Norme européenne (EN) harmonisée pour les stations terriennes mobiles (MES) de systèmes mobiles par satellite géostationnaire incluant les stations terriennes portables pour r...
NF L58-531*NF EN 2495:1990 Aerospace series. Single-pole circuit breakers temperature compensated rated currents up to 25 A. Product standard.

SAE - SAE International, flow standard microspheres

SAE AS5072/2A-2002 COUPLING ASSEMBLY@ .375 DIAMETER@ NON-LOCKING PROBE STYLE@ MINIATURE SELF-SEALING-ALIGNING@ SELF-SEALING DISCONNECT FOR POLYALPHAOLEFIN FLUID
SAE AS5072/2-1996 Coupling Assembly@ .375 Diameter@ Non-Locking Probe Style@ Miniature Self-Sealing-Aligning@ Self-Sealing Disconnect for Polyalphaolefin Fluid
SAE AS5072/3-1996 Coupling Assembly@ .420 Diameter@ Non-Locking Probe Style@ Miniature Self-Sealing-Aligning@ Self-Sealing Disconnect for Polyalphaolefin Fluid

Society of Automotive Engineers (SAE), flow standard microspheres

SAE AS5072/2A-2013 COUPLING ASSEMBLY, .375 DIAMETER, NON-LOCKING PROBE STYLE, MINIATURE SELF-SEALING-ALIGNING, SELF-SEALING DISCONNECT FOR POLYALPHAOLEFIN FLUID

International Organization for Standardization (ISO), flow standard microspheres

ISO 8820-3:2010 Road vehicles - Fuse-links - Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
ISO 8820-3:2015 Road vehicles - Fuse-links - Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
ISO 13083:2015 Surface chemical analysis - Scanning probe microscopy - Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, flow standard microspheres

GB/T 9109.4-1988 Dynamic measurement of crude oil--The operating stipulations of verificating positive displacement meters by pipe prover

American National Standards Institute （ANSI), flow standard microspheres

ANSI/IEEE C37.63:2013 Standard Requirements for Overhead@ Pad-Mounted@ Dry-Vault@ and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV
ANSI/IEEE C37.47:2011 Standard Specifications For High Voltage ( 1000 V) Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches

ETSI - European Telecommunications Standards Institute, flow standard microspheres

ETSI EN 301 459:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit@ operating in the 29@5 GHz to 30@0 GHz frequency bands cove
ETSI EN 301 360:2016 Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit@ operating in the 27@5 GHz to 29@5 GHz frequency bands cove

RU-GOST R, flow standard microspheres

GOST R 59314-2021 Earth remote sensing data from space. Standard product formats of automatic processing of data obtained from electromagnetic visible and near-infrared earth remote sensing from space. General provisions

The American Road & Transportation Builders Association, flow standard microspheres

AASHTO T 315-2002 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) HM-22; Part IIB; Formaly AASHTO TP 5

ES-UNE, flow standard microspheres

UNE-EN 60191-6-13:2016 Mechanical standardization of semiconductor devices - Part 6-13: Design guideline of open-top-type sockets for Fine-pitch Ball Grid Array (FBGA) and Fine-pitch Land Grid Array (FLGA) (Endorsed by Asociación Española de Normalización in January of 20...