ZH
RU
ES

Calibration testing work

Calibration testing work, Total:500 items.

In the international standard classification, Calibration testing work involves: Acoustics and acoustic measurements, Audio, video and audiovisual engineering, Equipment for petroleum and natural gas industries, Hand-held tools, Non-destructive testing, Testing of metals, Welding, brazing and soldering, Thermodynamics and temperature measurements, Metrology and measurement in general, Linear and angular measurements, Horology, Optics and optical measurements, Vacuum technology, Rubber, Iron and steel products, Measurement of force, weight and pressure, Measurement of fluid flow, Analytical chemistry, Quality, Electricity. Magnetism. Electrical and magnetic measurements, Mechanical testing, Applications of information technology, Electrical engineering in general, Capacitors, Optoelectronics. Laser equipment, Air quality, Solar energy engineering, Geology. Meteorology. Hydrology, Construction equipment, Occupational safety. Industrial hygiene, Radiation measurements, Test conditions and procedures in general, Alarm and warning systems, Networking, Installations in buildings, Protection of and in buildings, Vocabularies, Medical sciences and health care facilities in general, Medical equipment, Standardization. General rules, Shipbuilding and marine structures in general, Lamps and related equipment, Machine tools, Lifting equipment, Measurement of volume, mass, density, viscosity, Biology. Botany. Zoology, Wastes, Power transmission and distribution networks, Construction industry, Products of the textile industry, Laundry appliances, Rubber and plastics products, Mining equipment, Company organization and management.

National Metrological Technical Specifications of the People's Republic of China, Calibration testing work

JJF 1134-2005 Calibration Specification for Working Force Measuring Machines for Special Purposes
JJF 1283-2011 Calibration Specification for Residual Current Operated Protective Device Operated Characteristic Tester
JJF 1110-2003 Calibration Specification for Construction Quality Tester Sets
JJF 1910-2021 Calibration Specification for Electrochemical Workstations
JJF 1563-2016 Calibration Specification for Workstation of Chromatographic Data
JJF 1290-2011 Calibration Specification for Particulate Analyzer
JJF 1822-2020 Calibration Specification for Urea Analyzers of Water Sample Detection
JJF 1108-2012 Calibration Specification for OCTG Thread Working Gauges
JJF 1505-2015 Calibration Specification for Acoustic Emission Instrumentation
JJF 1828-2020 Calibration Specification for Adenosine Triphosphate (ATP)Fluorescence Detectors
JJF 1287-2011 Calibration Specification for Clarity Test Equipment
JJF 1050-1996 Calibration Specification of Working Thermal Conducting Vacuum Gauge
JJF 2053-2023 Calibration Specification for Performance Parameters of Clean Benches
JJF 1478-2014 Calibration Specification for High Strength Bolt Testers
JJF 1171-2007 Calibration Specification for Temperature Itinerant Detecting Instrument
JJF 1360-2012 Calibration Specification for Coast-down Time Testers
JJF 1433-2013 Calibration Specification for Chlorine Alarm Detectors
JJF 1948-2021 Calibration Specification for Gasoline Vapor Recovery Detectors
JJF 1729-2018 Calibration Specification for Pesticide Residue Detectors
JJF(建材)143-2018 Calibration Specification for Pile Foundation Settle Testers
JJF(建材) 143-2018 Calibration specification for pile foundation settlement detector
JJF 1674-2017 Calibration Specification for Alarmer Detectors of Benzene
JJF 1969-2022 Calibration Specification for Impact Elastic Wave Measurement Apparatus
JJF 1148-2006 Calibration Specification for Test Devices of Contact Lenses
JJF 1749-2019 Calibration Specification for Vehicle Contour Dimensions Testers
JJF 1912-2021 Calibration Specification for Testing Instruments of Sunglasses Power
JJF 1192-2008 Calibration Specification for Automotive Suspension Tester
JJF 1541-2015 Calibration Specification for Hemodialysis Equipment Tester
JJF 1263-2010 Calibration Specification for the Alarmer Detector of Sulfur Hexafluoride
JJF(机械) 014-2008 Calibration specification for electric iron automatic detection device
JJF(建材) 162-2019 Calibration specification for glass surface stress detector
JJF(机械) 1056-2021 Calibration specification for residual stress ultrasonic detector
JJF(机械) 1059-2021 Calibration specification for manipulator ultrasonic testing system
JJF(机械)1056-2021 Calibration specification for residual stress ultrasonic detector
JJF(机械)1059-2021
JJF 1220-2009 Calibration Specification for PIND(Particle Impact Noise Detection)
JJF 1372-2012 Calibration Specification for Instrument of Testing Mortar-strength by Penetration Resistance Method
JJF 1888-2020 Calibration Specification for Hydrogen Chloride Gas Detectors and Alarms
JJF 1711-2018 Calibration Specification for Sulfur Hexafluoride Decomposition Products Detectors
JJF(轻工) 103-2018 Calibration specification for cleaning rate detection device of washing machine
JJF(机械) 1003-2018 Calibration specification for light vehicle emission detection system
JJF(机械)1003-2018 Calibration specification for light vehicle emission detection system
JJF 2023-2023
JJF 1667-2017 Calibration Specification for Harmonics Analyzing Instruments at Power Frequency
JJF 1108-2003 Calibration Specification for Working Gauge of Rotary Shouldered Connections,Round Thread Casing and Tubing
JJF 1835-2020 Calibration Specification for Remote Sensing Measurement Systems of Vehicle Exhaust
JJF 1873-2020 Calibration Specification for Diesel Vehicle Nitrogen Oxides(NOx) Measuring Instruments
JJF 1582-2016 Calibration Specification for(Specific) Activity Rapid Detecting Instrument
JJF(机械) 016-2008 Calibration specification for automatic rice cooker factory inspection device
JJF(机械) 068-2009 Calibration specification for fan motor electrical performance testing device
JJF 2046-2023 Calibration Specification for Standard Neutral Filters of Automobile Test Equipment
JJF(机械) 1044-2020 Calibration specification for power frequency high voltage measurement system
JJF(机械) 1061-2021 Calibration specification for power frequency high current measurement system
JJF(机械)1044-2020 Calibration specification for power frequency high voltage measurement system
JJF(机械)1061-2021
JJF 1728-2018 Calibration Specification for Ultrasonic Testing Instruments for Resin Matrix Composites
JJF(建材)129-2018 Calibration Specification for Constant Temperature and Humidity Chambers for Safety Glass
JJF(建材) 129-2018 Calibration specification for constant temperature and humidity chamber for safety glass testing
JJF 1221-2009 Calibration Spectification for Chassis Dynamometers for Automobile Emission Testing
JJF(纺织) 102-2021 Calibration Specification for Geotextiles Products-Dynamic Perforation Testers
JJF 1653-2017 Calibration Specification for Condenser Project Measurement Microphones
JJF(纺织)102-2021 Calibration Specification for Geotextiles Products-Dynamic Perforation Testers
JJF(机械) 1028-2019 Calibration specification for power frequency transient current measurement system
JJF(机械)1028-2019 Calibration specification for power frequency transient current measurement system
JJF 1973-2022
JJF 1953-2021 Calibration Specification for Gas Chromatographs with Sulfur Chemiluminescence Detector
JJF(机械) 012-2008 Calibration specification for small power single-phase motor automatic detection device
JJF 2056-2023 Calibration Specification for Automatic Microbial Detection Systems based on Impedance Method
JJF 2037-2023
JJF 1196-2008 Calibration Specification of Motor Vehicle Testers for Steering Force and Steering Angle
JJF 1172-2007 Calibration Specification for Volatile Organic Compounds Photo Ionization Detectors
JJF 2063-2023 Calibration Specification for Electroluminescence Defect Detection Instruments of Photovoltaic Cells and Modules
JJF 1227-2009 Calibration Spectification for Exhaust Pollutants from Gasoline Vehicle under Steady-state Loaded Mode Measurement System

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Calibration testing work

ASHRAE CH-99-5-1-1999 Fault Detection Tool for School Buildings

AR-IRAM, Calibration testing work

IRAM 5032-1949

Association Francaise de Normalisation, Calibration testing work

NF C97-335:2003 Measurement microphones - Part 5 : methods for pressure calibration of working standard microphones by comparison.
NF EN ISO 2400:2012 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 1
NF EN ISO 8222/A1:2022 Systèmes de mesure du pétrole - Étalonnage - Contenants de mesure volumétriques, jauges étalons et contenants de mesure de travail (y compris les formules relatives aux propriétés des liquides et des matériaux) - Amendement 1 : correction de de...
NF EN ISO 20486:2018 Essais non destructifs - Contrôle d'étanchéité - Étalonnage des fuites de référence des gaz
NF EN ISO 7963:2022 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage no 2
NF A09-018*NF ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
NF A09-461*NF EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
NF EN ISO 16946:2017 Essais non destructifs - Essais par ultrasons - Spécifications relatives aux blocs d'étalonnage à gradins
NF X10-531:1981 Calibratium of the helium leak for leak detectors.
NF A09-312*NF EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
NF ISO 19675:2017 Essais non destructifs - Contrôle par ultrasons - Spécifications relatives au bloc d'étalonnage pour la technique multi-éléments
NF EN ISO 7278-2:2022 Systèmes de mesurage des produits pétroliers - Partie 2 : conception, étalonnage et fonctionnement des tubes étalons
NF X50-061*NF EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories.
NF X50-061*NF EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
NF EN ISO/IEC 17025:2017 Exigences générales concernant la compétence des laboratoires d'étalonnages et d'essais
NF X50-064:1995 GENERAL CRITERIA FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION. (EUROPEAN STANDARD EN 45004).
NF A03-003:2005 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines.
NF EN ISO 8222:2020 Systèmes de mesure du pétrole - Étalonnage - Contenants de mesure volumétriques, jauges étalons et contenants de mesure de travail (y compris les formules relatives aux propriétés des liquides et des matériaux)
NF A03-003*NF EN ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines.
NF ISO 11843-5:2008 Capacité de détection - Partie 5 : méthodologie des étalonnages linéaire et non linéaire
NF EN 61094-5:2016 Électroacoustique - Microphones de mesure - Partie 5 : méthodes pour l'étalonnage en pression par comparaison des microphones étalons de travail
NF A80-100:2005 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities.
NF A80-100*NF EN ISO 17662:2016 Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities
NF C97-335*NF EN 61094-5:2016 Electroacoustics - Measurement microphones - Part 5 : methods for pressure calibration of working standard microphones by comparison
NF G07-400:2005 Textiles - Industrial washing and finishing procedures for testing of workwear.

NL-NEN, Calibration testing work

NEN 927-1963 Pressure gauges. Testing and gauging
NEN 3419-1992 Ergonomics - Measurement of noise at the workplace Inventory examination

RO-ASRO, Calibration testing work

STAS 7802/2-1979 CALIBRATING BLOCKS FOR VERIFYING AND REGULATING OF FLAW DETECTORS Calibrating blocks type Al
STAS 7802/3-1979 CALIBRATING BLOCKS FOR VERIFYING AND REGULATING OF FLAW DETECTORS Calibrating blocks type A2
STAS 7802/4-1979 CALIBRATING BLOCKS FOR VERIF YIND AND REGULATING OF FLAW DETECTORS Calibrating blocks type A3
STAS 7802/5-1979 CALIBRAT IN G BLOCKS FOR GHECK1NG AND REGULATING OF FLAW DETECTORS Calibrating blocks type A4
STAS R 12500/2-1987 ULTRASONIC FAULT DETECTION CALIBRATION AND ADJUSTMENT OF ULTRASONIC FA DL DETECTORS
STAS 8222-1968
STAS 8223-1968

British Standards Institution (BSI), Calibration testing work

BS EN ISO 7278-2:2022 Petroleum measurement systems - Pipe prover design, calibration and operation
BS EN ISO 2400:2012 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 1
BS ISO 11843-2:2000 Capability of detection. Methodology in the linear calibration case
BS ISO 18898:2012 Rubber. Calibration and verification of hardness testers
BS ISO 18898:2016 Rubber. Calibration and verification of hardness testers
BS EN ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
BS EN 61094-5:2002 Measurement microphones - Methods for pressure calibration of working standard microphones by comparison
22/30437356 DC BS EN ISO 7963. Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
BS ISO 19675:2017 Non-destructive testing. Ultrasonic testing. Specification for a calibration block for phased array testing (PAUT)
BS EN 61094-5:2016 Tracked Changes. Electroacoustics. Measurement microphones. Methods for pressure calibration of working standard microphones by comparison
21/30430328 DC BS EN ISO 7278-2. Petroleum measurement systems. Part 2. Pipe prover design, calibration and operation
19/30383995 DC BS EN ISO 8222. Petroleum measurement systems. Calibration. Temperature corrections for use when calibrating volumetric proving tanks
BS EN 61094-8:2012 Electroacoustics. Measurement microphones. Methods for free-field calibration of working standard microphones by comparison
BS EN ISO 376:2011 Metallic materials. Calibration of force-proving instruments used for the verification of uniaxial testing machines
BS EN ISO 7963:2010 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
BS ISO 11843-5:2008+A1:2017 Capability of detection - Methodology in the linear and non-linear calibration cases
BS ISO 11843-5:2009 Capability of detection. Methodology in the linear and non-linear calibration cases
BS ISO 11843-5:2008 Capability of detection - Methodology in the linear and non-linear calibration cases
BS EN ISO 7963:2022 Tracked Changes. Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
BS EN ISO 15797:2002 Textiles - Industrial washing and finishing procedures for testing of workwear
BS EN ISO 16946:2015 Non-destructive testing. Ultrasonic testing. Specification for step wedge calibration block
BS ISO 4965-1:2012 Metallic materials. Dynamic force calibration for uniaxial fatigue testing. Testing systems

NO-SN, Calibration testing work

NS 10210-1982 Non-destructive testing - Ultrasonic testing - Calibration block 1

American National Standards Institute （ANSI), Calibration testing work

ANSI/SCTE 14-2011 Test Method for Hex Crimp Tool Verification/Calibration
ANSI N323-1978 Radiation protection instrumentation - Test and calibration
ANSI/ASTM/ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
ANSI/ASME B89.1.6M, Rev.2-2002 Qualified Plain Internal Diameters for Use as Master Rings and Ring Gages, Measurement of
ANSI/ASA S1.15-5-2021 American National Standard Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
ANSI/ASME B89.1.5-1998 Measurement of Plain External Diameters for Use as Master Discs or Cylindrical Plug Gages
ANSI/ASME B89.1.6-2002 Measurement of Plain Internal Diameter for Use as Master Ring or Ring Gauges

HU-MSZT, Calibration testing work

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Calibration testing work

GB/T 19799.2-2012/ISO 7963:2006 Non=destructive testing--Ultrasonic testing--Specification for calibration block No.2
GB/T 19799.2-2012/ISO 7963-2006 Non=destructive testing--Ultrasonic testing--Specification for calibration block No.2
GB/T 19799.2-2005 Non-destructive testing.Ultrasonic testing.Calibration block No.2
GB/T 19799.1-2005 Non-destructive testing-Ultrasonic testing-Calibration block No.1
GB/T 19799.2-2012 Non-destructive testing.Ultrasonic testing.Specification for calibration block No.2
GB/T 19799.1-2015 Non-destructive testing.Ultrasonic testing.Specification for calibration block No. 1
GB/T 14890-1994 Calibration of field pyrheliometers
GB/T 19800-2005 Non-destructive testing-Acoustic emission inspection-Primary calibration of transducers
GB/T 13634-2000 Calibration of force-proving instruments used for the verification of testing machines
GB/T 13634-2008 Calibration of force-proving instruments used for the verification of uniaxial testing machines
GB/T 19801-2005 Non-destructive testing-Acoustic emission inspection-Secondary calibration of acoustic emission sensors
GB/T 15481-2000 General requirements for the competence of testing and calibration laboratories
GB/T 27025-2008 General requirements for the competence of testing and calibration laboratories
GB/T 15486-1995 Calibration and testing laboratory accreditation systems--General requirements for operation and recognition
GB/T 15000.9-2004 Directives for the work of reference materials(9)-Calibration in analytical chemistry and use of certified reference materials
GB/T 41812-2022 General rules for performance testing of automatic liquid handling workstation
GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part1:Tension/compression testing machines—Calibration and verification of the force-measuring system
GB/T 16640-1996 Standard guide for selection and calibration of dosimetry system for radiation processing
GB/T 16640-2008 Standard guide for selection and calibration of dosimetry systems for radiation processing

American Society for Testing and Materials (ASTM), Calibration testing work

ASTM E2847-11 Standard Practice for 65279; 65279;Calibration and Accuracy Verification of Wideband Infrared Thermometers
ASTM E181-10 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
ASTM E181-17 Standard Test Methods for Detector Calibration and Analysis of Radionuclides
ASTM D6091-97 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
ASTM E2063-12 Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM E2063-05 Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM E2063-12(2017) Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM D6318-03 Standard Practice for Calibrating a Fathometer Using a Bar Check Method
ASTM D6318-03(2008) Standard Practice for Calibrating a Fathometer Using a Bar Check Method
ASTM D6318-03(2014) Standard Practice for Calibrating a Fathometer Using a Bar Check Method
ASTM E126-19 Standard Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
ASTM E2063-05(2011) Standard Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM D5674-95(2003) Standard Guide for Operation of a Gaging Station
ASTM E74-01 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E74-02 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E74-06 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E74-13a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
ASTM E1368-11 Standard Practice for Visual Inspection of Asbestos Abatement Projects
ASTM E1444/E1444M-11 Standard Practice for Magnetic Particle Testing
ASTM E915-96 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E915-16 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E915-96(2002) Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E499/E499M-11 Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM D5674-95(2008) Standard Guide for Operation of a Gaging Station
ASTM D5674-95(2014) Standard Guide for Operation of a Gaging Station
ASTM D5674-22 Standard guide for measuring station work
ASTM D6365-99(2011) Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test
ASTM D7202-05 Standard Test Method for Determination of Beryllium in the Workplace Using Field-Based Extraction and Fluorescence Detection
ASTM D7202-21 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
ASTM D7202-15 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
ASTM D7202-22 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
ASTM F1364-92(1997)e1 Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
ASTM F1364-03e1 Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
ASTM F1364-03(2022) Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
ASTM E915-10 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM ISO/ASTM51261-02 Standard Guide for Selection and Calibration of Dosimetry Systems for Radiation Processing

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Calibration testing work

GB/T 34363-2017 Non-destructive testing—Test method for fabricating and checking aluminum alloy ultrasonic standard reference blocks
GB/T 20441.5-2017 Electroacoustics—Measurement microphones—Part 5: Methods for pressure calibration of working standard microphones by comparison

Group Standards of the People's Republic of China, Calibration testing work

T/LZZLXH 063-2021 Internal Calibration Specifications for Inspection and Testing Laboratories
T/SJZSYYQXH JZ001-2023 Calibration method of inspection tools for traffic construction products
T/CNIDA 009-2023
T/SJZSYYQXH JZ009-2023 Calibration method of on-site testing equipment for thermal performance of building envelope
T/CMA JD006-2019 Calibrators for Headlamp Tester of Motor Vehicle
T/CSTM 00902-2023 Calibration specification for lime reactivity analyzer
T/SJZJLXH 0005-2020 Calibration specification for eddy current testing rod
T/SJZJLXH 0002-2018 Calibration specification for on-site pressure detection system
T/SJZJLXH 0001-2018 Calibration specification for on-site flow detection system
T/SJZJLXH 0004-2018 Calibration specification for on-site liquid level detection system
T/SJZJLXH 0003-2018 Calibration specification for on-site temperature detection system
T/SJZJLXH 0012-2020 Calibration specification for on-site liquid level detection system
T/SJZJLXH 0010-2020 Calibration specification for on-site pressure detection system
T/SJZJLXH 0011-2020 Calibration specification for on-site temperature detection system
T/SJZJLXH 0006-2020 Calibration specification for ultrasonic testing rod
T/SJZJLXH 0009-2020 Calibration specification for on-site flow detection system
T/CMA 037-2021 Calibration method for methanol alarm detectors
T/CEC 113-2016 Calibration specification for electric power detection infrared imager
T/SXCAA 006-2019 Measuring Equipment Verification/Calibration Result Confirmation Specification
T/SBX 083-2023 Hydrogen fluoride gas detection alarm calibration specifications
T/CMA 036-2021 Calibration method for ethylene oxide alarm detectors
T/HNIMA 001-2023 Calibration method for liquid chromatograph with charged aerosol detector
T/YSG 001-2022 Specifications for Field Calibration of Combustible Gas Detection and Alarms
T/CIQA 39-2022 Guidelines on cyber practices of inspection and testing institutions
T/HBJLXH 002-2022 Calibration Method of Geotextile water permeability tester
T/SDZDH 002-2020 Mask ventilation resistance and pressure difference detector Calibration method
T/CDSA 305.21-2017 Guidance for underwater inspection of underwater steel structure
T/CMA HG109-2023 Calibration Method for On-line Dissolved Oxygen Analyzer
T/MZMS 0002-2021 Calibration Specifications for AOI (Automatic Optical Inspection) Equipment in Printed Circuit Industry
T/CECS 1103-2022 Engineering Bamboo Structure Testing Standard
T/HNCAA 026-2021 Identification of measuring equipment metrological traceability requirements and confirmation of verification and calibration results

SE-SIS, Calibration testing work

SIS SS 11 42 41-1979 Ultrasonic testing — Calibration block No 2
SIS 11 42 40-1974 Calibration block No. 1 for ultrasonic testing
SIS SS 11 03 32-1982 Hardness test - Brinell test - Direct verification of standardizing machine for calibration of standardized blocks

Professional Standard - Petroleum, Calibration testing work

SY/T 6639-2005 The calibration method of geophone tester
SY/T 6639-2012 Calibration method for geophone tester
SY 6639-2012 Geophone Tester Calibration Method
SY/T 7081-2016 Calibrating method for calibration device of geophone tester
SY 7081-2016 Calibration method of calibration device of geophone tester

Henan Provincial Standard of the People's Republic of China, Calibration testing work

DB41/T 1037-2015 Verticality measuring ruler calibration device
DB41/T 2454-2023 Technical Specifications for Validity Confirmation of Verification and Calibration Certificates for Measuring Instruments

RU-GOST R, Calibration testing work

GOST 8.339-1978 State system for ensuring the uniformity of measurements. Seconds-timers-gauges. Methods and means for verification
GOST R ISO 6142-2008 Gas analysis. Preparation of calibration gas mixtures. Gravimetric method
GOST R ISO 6144-2008 Gas analysis. Preparation of calibration gas mixtures. Static volumetric method
GOST R ISO 11843-2-2007 Statistical methods. Capability of detection. Part 2. Methodology in the linear calibration case
GOST ISO 11204-2016 Noise of machinery. Determination of emission sound pressure levels at a work station and at the other specified positions applying accurate environmental corrections

Danish Standards Foundation, Calibration testing work

DS/EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2
DS/EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1
DS/EN ISO 8222:2003 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks
DS/EN ISO/IEC 17025/AC:2006 General requirements for the competence of testing and calibration laboratories
DS/EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
DS/EN 61094-5:2002 Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
DS 2191.8:1984 Measurement of noise from woodworking machines. Part 8: Operating coditions for double-end sizing and edge banding machines
DS/ISO 11843-2/Corr. 1:2007 Capability of detection - Part 2: Methodology in the linear calibration case
DS/ISO 11843-2:2003 Capability of detection - Part 2: Methodology in the linear calibration case
DS/EN 61094-8/AC:2013 Electroacoustics - Measurement microphones - Part 8: Methods for free-field calibration of working standard microphones by comparison
DS/EN 61094-8:2013 Electroacoustics - Measurement microphones - Part 8: Methods for free-field calibration of working standard microphones by comparison
DS/EN 280+A2:2009 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
DS/EN 280:2013 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
DS/CEN ISO/TR 13115:2012 Non-destructive testing - Methods for absolute calibration of acoustic emission transducers by the reciprocity technique

Indonesia Standards, Calibration testing work

SNI ISO 2400:2014 Non-destructive testing - Ultrasonic testing -Specification for calibration block No.1
SNI ISO/IEC 17025:2008 General requirements for the competence of testing and calibration laboratories
SNI 16-7060-2004 The measurement of ultraviolet ray radiation at work places

Korean Agency for Technology and Standards (KATS), Calibration testing work

KS B ISO 2400:2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
KS C IEC 61094-5:2007 Measurement microphones-Part 5:Methods for pressure calibration of working standard microphones by comparison
KS C IEC 61094-5:2014 Measurement microphones－Part 5：Methods for pressure calibration of working standard microphones by comparison
KS B ISO 12713:2018 Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers
KS M ISO 18898:2010 Rubber-Calibration and verification of hardness testers
KS C IEC 61094-5-2007(2012) Measurement microphones－Part 5：Methods for pressure calibration of working standard microphones by comparison
KS Q ISO 11843-2:2009 Capability of detection－Part 2：Methodology in the linear calibration case
KS Q ISO/IEC 17025:2006 General requirements for the competence of testing and calibration laboratories
KS C IEC 61094-5A:2017 Electroacoustics — Measurement microphones — Part 5: Methods for pressure calibration of working standard microphones by comparison
KS B ISO 12714:2008 Non-destructive testing－Acoustic emission inspection－Secondary calibration of acoustic emission sensors
KS B ISO 376:2002 Metallic materials-Calibration of force-proving instruments used for the verification of uniaxial testing machines
KS B ISO 376:2015 Metallic materials－Calibration of force－proving instruments used for the verification of uniaxial testing machines
KS Q ISO 11843-2-2009(2019) Capability of detection－Part 2：Methodology in the linear calibration case
KS C IEC 61094-5A-2017(2022) Electroacoustics — Measurement microphones — Part 5: Methods for pressure calibration of working standard microphones by comparison
KS B ISO 12714:2018 Non-destructive testing — Acoustic emission inspection — Secondary calibration of acoustic emission sensors
KS K ISO 15797:2008 Textiles-Industrial washing and finishing procedures for testing of workwear
KS K ISO 15797:2014 Textiles — Industrial washing and finishing procedures for testing of workwear

KR-KS, Calibration testing work

KS B ISO 2400-2019 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
KS B ISO 12713-2018 Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers
KS A 0083-2013(2023) Mass spectrometer(type leak) detector general rules for calibration system
KS C IEC 61094-5A-2017 Electroacoustics — Measurement microphones — Part 5: Methods for pressure calibration of working standard microphones by comparison
KS B ISO 12714-2018 Non-destructive testing — Acoustic emission inspection — Secondary calibration of acoustic emission sensors

German Institute for Standardization, Calibration testing work

DIN EN ISO 20486:2018-05 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017); German version EN ISO 20486:2018
DIN EN ISO 7963:2023-02 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022); German version EN ISO 7963:2022
DIN EN ISO 2400:2013-01 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012); German version EN ISO 2400:2012
DIN EN ISO 7278-2:2023-03 Petroleum measurement systems - Part 2: Pipe prover design, calibration and operation (ISO 7278-2:2022); German version EN ISO 7278-2:2022
DIN EN ISO 16946:2017-07 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017); German version EN ISO 16946:2017
DIN EN ISO 7278-2:2023 Petroleum measurement systems - Part 2: Pipe prover design, calibration and operation (ISO 7278-2:2022)
DIN EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
DIN EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
DIN ISO 11843-2:2006 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English)
DIN EN ISO 16946:2023-08 Non-destructive testing - Ultrasonic testing - Specification for a step wedge calibration block (ISO/DIS 16946:2023); German and English version prEN ISO 16946:2023 / Note: Date of issue 2023-07-07*Intended as replacement for DIN EN ISO 16946 (2017-07).
DIN EN 61094-5:2016-12 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2016); German version EN 61094-5:2016
DIN SPEC 4882:2016-11 Non-destructive testing - Electromagnetic test methods - Calibration blocks for grinding burns testing
DIN EN 61094-5:2003 Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2001); German version EN 61094-5:2001
DIN ISO 11843-2 Berichtigung 1:2008-06 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000), Corrigenda to DIN ISO 11843-2:2006-06 (ISO 11843-2:2000/Cor. 1:2007; text in German, English)
DIN 19267:1978 pH measurement; technical buffer solutions, preferably for the calibration of technical measuring installations
DIN VDI/DGQ 3441:1977 Statistical examination of exactly working and positioning of machine-tools Fundamentels
DIN EN ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017); German and English version EN ISO/IEC 17025:2017
DIN EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017); German version EN ISO 16946:2017
DIN EN ISO 15797:2004 Textiles - Industrial washing and finishing procedures for testing of workwear (ISO 15797:2002), German version EN ISO 15797:2004

International Organization for Standardization (ISO), Calibration testing work

ISO 19675:2017 Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT)
ISO/IEC GUIDE 58:1993 Calibration and testing laboratory accreditation systems; general requirements for operation and recognition
ISO 20486:2017 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
ISO 7963:2022 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 2
ISO 18898:2016 Rubber - Calibration and verification of hardness testers
ISO 18898:2012 Rubber - Calibration and verification of hardness testers
ISO/CD 16946 Non-destructive testing — Ultrasonic testing — Specification for step wedge calibration block
ISO/DIS 16946:2023 Non-destructive testing — Ultrasonic testing — Specification for a step wedge calibration block
ISO 7278-2:2022 Petroleum measurement systems — Part 2: Pipe prover design, calibration and operation
ISO 16946:2015 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
ISO 376:2004 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 11843-2:2000 Capability of detection - Part 2: Methodology in the linear calibration case
ISO 9847:2023 Solar energy — Calibration of pyranometers by comparison to a reference pyranometer
ISO 9847:1992 Solar energy; calibration of field pyranometers by comparison to a reference pyranometer
ISO/IEC 17025:1999 General requirements for the competence of testing and calibration laboratories
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
ISO 12714:1999 Non-destructive testing - Acoustic emission inspection - Secondary calibration of acoustic emission sensors
ISO 376:1999 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 376:1987 Metallic materials; Calibration of force-proving instruments used for the verification of unaxial testing machines
ISO 376:2011 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines
ISO 15797:2002 Textiles - Industrial washing and finishing procedures for testing of workwear
ISO/IEC 17025:2005/Cor 1:2006 General requirements for the competence of testing and calibration laboratories; Technical Corrigendum 1

Standard Association of Australia （SAA）, Calibration testing work

HB 86.1-1996 A guide to the selection, care, calibration and checking of measuring instruments in industry - General principles
HB 86.2-1998 A guide to the selection, care, calibration and checking of measuring instruments in industry - Simple length and angle measuring instruments
AS ISO/IEC 17025:2005/Amdt 1:2006
AS ISO/IEC 17025:2018 General requirements for the competence of testing and calibration laboratories

ANSI - American National Standards Institute, Calibration testing work

N15.20-1975 Guide to Calibrating Nondestructive Assay Systems (INMM)

Yunnan Provincial Standard of the People's Republic of China, Calibration testing work

DB53/T 681-2015 Testing Laboratory Internal Calibration Specifications

National Metrological Verification Regulations of the People's Republic of China, Calibration testing work

JJG 1001-2005 Calibrators for Near Headlamp Tester of Motor Vehicle
JJG 967-2001 Verification Regulation of Calibrators for Headlamp Tester of Motor Vehicle
JJG 967-2015 Motor vehicle headlamp tester calibrator verification regulations
JJG(交通) 015-1999 Verification Regulation of Headlamp for Vehicle Tester's Aligner
JJG 218-1991 Verification Reguiation of Working Standards for Inductance
JJG 163-1991 Verification Regulation of Working Standards for Capacitance
JJG 273-1991 Verification Reguiation of Working Standard Weights
JJG 676-2000 Verification Regulation of Working Measuring Vibration Instruments
JJG 455-2000 Verification Regulation of Working Dynamometers
JJG 733-1991 Verification Regulation of Working Standard Lamps for Total Luminous Flux
JJG 719-1991 Verification Regulation for Working Standard of Direct-Current Electromotive Force
JJG 756-1991 Verification Regulation of Working Standard Equipment for Optical Density
JJG 248-1981 Verification Regulation of Working Standard of Laser Power Meter in Low Range
JJG 755-1991 Verification Regulation of Working Standard Equipment for UV Irradiance
JJG 716-1991 Verification Regulation of 0～419.527℃ Working Standard Platinum Resistance Thermometer
JJG 727-1991 Verification Regulation of Working Standard of Piston Manometers
JJG 175-2015 verification Regulation of Working Standard Microphones (Electrostatic Actuator Method)
JJG 1019-2007 Verification Regulation of Working Standard Microphones (Coupler Comparison Method)

European Committee for Standardization (CEN), Calibration testing work

EN ISO 16946:2015 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2015)
prEN ISO 16946 rev Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block
EN 13192:2001 Non destructive testing - Leak testing - Calibration of reference leaks for gases
prEN 45004-1992 General criteria for the operation of bodies performing inspection
EN 61094-5:2001 Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparison
EN ISO/IEC 17025:2000 General Requirements for the Competence of Testing and Calibration Laboratories ISO/IEC 17025: 1999
EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
EN ISO 15797:2018 Textiles - Industrial washing and finishing procedures for testing of workwear

CEN - European Committee for Standardization, Calibration testing work

EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases

国家市场监督管理总局、中国国家标准化管理委员会, Calibration testing work

GB/T 40336-2021 Non-destructive testing—Leak testing—Calibration of reference leaks for gases
GB/T 40661-2021 Calibration specification of measurement instrument for power frequency magnetic field
GB/T 27025-2019 General requirements for the competence of testing and calibration laboratories
GB/T 13634-2019 Metallic materials—Calibration of force-proving instruments used for the verification of uniaxial testing machines
GB/T 15040-2021 Working standard lamps for the measurement of luminous flux
GB/T 40259-2021 General specification for supporting quality of longwall face

Jiangsu Provincial Standard of the People's Republic of China, Calibration testing work

DB3204/T 1040-2022 Code of Integrity Behavior for Inspection, Testing, Verification and Calibration Institutions
DB32/T 4010-2021 Food Rapid Testing Specifications
DB32/T 4550-2023 Work procedures for proficiency verification of inspection and testing institutions
DB32/T 4328-2022 Lightning Disaster Defense Inspection Work Guidelines
DB3201/T 1051-2021 Specifications for rapid inspection of agricultural product wholesale markets
DB32/T 4195-2022 On-site Technical Review Work Procedures for Qualification Accreditation of Inspection and Testing Institutions

Anhui Provincial Standard of the People's Republic of China, Calibration testing work

DB3418/T 023-2022 Guidelines for Sampling Inspection of Inspection and Testing Institutions
DB3404/T 4-2021 Enterprise Standardization Supervision and Inspection Work Specifications

YU-JUS, Calibration testing work

JUS C.H4.020-1995 Round-steel link chains, grade 2, non-calibrated, tested
JUS C.H4.021-1995 Round-steel link chains, grade 2, calibrated, tested
JUS C.H4.022-1994 Round steel link chains for lifting purposes , grade 5 (p)-Calibrated - Tested
JUS C.H4.023-1994 Round-steel link chains for lifting purposes , grade 6 (S)-Calibrated - Tested
JUS C.H4.056-1994 Round-steel link chains, grade,8 non-calibrated, tested
JUS C.H4.024-1994 Round-steel link chains for lifting purposes , grade 8 (T)-Calibrated - Tested
JUS C.H4.052-1994 Round-steel link chains, grade 5 (P) non-calibrated,tested
JUS C.H4.030-1995 Round-steel link chains for conveyors, grade 2, calibrated, tested, pitch 5 d
JUS C.H4.031-1995 Round-steel link chains for conveyors, grade 2, calibrated, tested, pitch 3,5 d
JUS C.H4.034-1995 Round-steel link chains for conveyors, grade 3, calibrated, tested, pitch 5 d
JUS C.H4.035-1995 Round-steel link chains for conveyors, grade 3, calibrated, tested, pitch 3,5 d

Lithuanian Standards Office , Calibration testing work

LST EN ISO 8222:2002 Petroleum measurement systems - Calibration - Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002)
LST EN ISO 7963:2010 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
LST EN ISO 2400:2012 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
LST EN 61094-5-2002 Measurement microphones. Part 5: Methods for pressure calibration of working standard microphones by comparison (IEC 61094-5:2001)
LST EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
LST EN 280-2002+A2-2010 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
LST EN 280-2013 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests

AENOR, Calibration testing work

UNE-EN ISO 8222:2003 Petroleum measurement systems. Calibration. Temperature corrections for use when calibrating volumetric proving tanks (ISO 8222:2002)
UNE-EN ISO 7963:2011 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006)
UNE-EN ISO 2400:2013 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012)
UNE-EN ISO 16946:2017 Non-destructive testing - Ultrasonic testing - Specification for step wedge calibration block (ISO 16946:2017)
UNE-EN 61094-5:2002 Measurement microphones -- Part 5: Methods for pressure calibration of working standard microphones by comparison.
UNE-EN ISO/IEC 17025:2005 Conformity assessment. General requirements for the competence of testing and calibration laboratories
UNE-EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017)

Professional Standard - Agriculture, Calibration testing work

CNAS-CL01-A025-2022 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Calibration
CNAS-CL01-A002-2018 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Chemical Testing
CNAS-CL01-A006-2021 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Nondestructive Testing
CNAS-CL01-A002-2020 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Chemical Testing
CNAS-CL01-A003-2019 Instructions for the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Electrical Testing
CNAS-RL01-2019 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Microbiological Testing
CNAS-CL01-A001-2018 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Microbiological Testing
CNAS-CL01-A001-2022 Explanation on the Application of Testing and Calibration Laboratory Competence Accreditation Criteria in the Field of Microbiological Testing
CNAS-EL15-2020 Explanation of Acceptance Requirements for Accreditation of Testing and Calibration Laboratories
CNAS-CL01-G001-2018 Application Requirements of CNAS-CL01
CNAS-EL-13-2019 Instructions for the approval of relevant requirements for test reports and calibration certificates

ES-UNE, Calibration testing work

UNE-EN ISO 7963:2023 Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2022)
UNE-EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
UNE-EN ISO 7278-2:2022 Petroleum measurement systems - Part 2: Pipe prover design, calibration and operation (ISO 7278-2:2022) (Endorsed by Asociación Española de Normalización in January of 2023.)
UNE-EN 61094-5:2017 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison

ESDU - Engineering Sciences Data Unit, Calibration testing work

ESDU 84007 A-1991 The treatment of calibrations of total air temperature probes for use in flight-test analysis work.

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Calibration testing work

GJB 380.3A-2004 Contamination test method of operating fluid for aviation Part 3:Calibration of automatic particle counters

Military Standard of the People's Republic of China-General Armament Department, Calibration testing work

GJB 380.3A-2015 Aviation Service Fluid Contamination Testing Part 3: Automatic Particle Counter Calibration
GJB 5109-2004 Equipment metrology support general requirements testing and calibration
GJB/J 3407-1998 Calibration procedures for dynamic calibration devices for spatial position measurement of flexible nozzles

Guangdong Provincial Standard of the People's Republic of China, Calibration testing work

DB4451/T 3-2022 Standard supervision and inspection work specification
DB4401/T 146.2-2022 Working Specifications for Rapid Food Testing Part 2: Routine Testing

Sichuan Provincial Standard of the People's Republic of China, Calibration testing work

DB5106/T 24-2023 Entrusted inspection and testing business work specifications

国家质量监督检验检疫总局, Calibration testing work

SN/T 4711-2016 Inspection and Quarantine Informatization Standardization Work Guide

ZA-SANS, Calibration testing work

SANS 61094-5:2009 Measurement microphones Part 5: Methods for pressure calibration of working standard microphones by comparison
SANS 11843-2:2009 Capability of detection Part 2: Methodology in the linear calibration case

Professional Standard - Machinery, Calibration testing work

JB/T 7586-1994 Partial discharge detectors. Calibrator of apparent discharge
JB/T 8428-1996 Calibration of standard test blocks for ultrasonic testing instruments of steel welds
JB/T 11700-2013 Mobile elevating work platforms.Work platforms for bridge inspection and maintenance
JB/T 9214-2010 Non-destructive testing.Test methods for evaluating performance characteristics of A-scan pulse-echo ultrasonic testing systems

Professional Standard - Electricity, Calibration testing work

DL/T 1787-2017 Calibration specification for relative dielectric loss and capacitance detector
DL/T 1954-2018 Calibration specification for partial discharge detector based on transient earth voltage method

Japanese Industrial Standards Committee (JISC), Calibration testing work

JIS Q 17020:2000 General criteria for the operation of various types of bodies performing inspection
JIS Z 8462-2:2003 Capability of detection -- Part 2: Methodology in the linear calibration case
JIS Q 17020:2012 Conformity assessment -- Requirements for the operation of various types of bodies performing inspection

Professional Standard - Construction Industry, Calibration testing work

JG/T 19-1999 Test standard for laminar clean bench

International Electrotechnical Commission (IEC), Calibration testing work

IEC 61094-5:2001 Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison
IEC 60866:1987 Characteristics and calibration of hydrophones for operation in the frequency range O.5 MHz to 15 MHz

European Committee for Electrotechnical Standardization（CENELEC）, Calibration testing work

EN 61094-5:2016 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison

Professional Standard-Safe Production, Calibration testing work

AQ/T 4269-2015 Specification of occupational hazards monitoring in the workplace

Professional Standard - Energy, Calibration testing work

NB/T 11056-2023 Calibration specification for automatic detection device of relay protection tester

TH-TISI, Calibration testing work

TIS 17025-2005 General requirements for the competence of testing and calibration laboratories
TIS 1300-1994 General requirements for teh competence of calibration and testing laboratories

American Society of Quality Control （ASQC), Calibration testing work

ASQ 17025-1999 General requirements for the competence of testing and calibration laboratories T17025E
ASQ 17025-2005 General requirements for the competence of testing and calibration laboratories T804

GOSTR, Calibration testing work

GOST ISO/IEC 17025-2019 General requirements for the competence of testing and calibration laboratories

CN-QIYE, Calibration testing work

Q/GDW 1439-2014 Calibration specification for multi-functional electric measuring and testing device

未注明发布机构, Calibration testing work

BS EN ISO/IEC 17025:2017(2018) General requirements for the competence of testing and calibration laboratories
BS ISO 11843-2:2000(2008) Capability of detection — Part 2 : Methodology in the linear calibration case
GJB 15481-2001 General requirements for competence of testing and calibration laboratories
BS EN 61094-8:2012(2013) Electroacoustics — Measurement microphones Part 8 : Methods for free - field calibration of working standard microphones by comparison
DIN EN 13192 Berichtigung:2004 Non-destructive testing – leak testing – calibrating reference leaks for gases; German version EN 13192:2001

Hubei Provincial Standard of the People's Republic of China, Calibration testing work

DB42/T 2102-2023 Quality Control Work Guide for Inspection and Testing Institutions

Liaoning Provincial Standard of the People's Republic of China, Calibration testing work

DB21/T 3806-2023 Specifications for video recording of the entire elevator inspection and testing process

NATO - North Atlantic Treaty Organization, Calibration testing work

AQAP-6 CANC NOTICE 1-1995 NATO Measurement and Calibration System Requirements for Industry (To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@nso.nato.int
AQAP-6-1976 NATO Measurement and Calibration System Requirements for Industry (ED 2 AMD 0; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32 (0)2 – 707 5556@ email: nso@

Professional Standard - Military and Civilian Products, Calibration testing work

WJ 9046-2004 Calibration specification for industrial explosive detonation velocity tester
WJ 9047-2004 Calibration specification for electric parameter tester of industrial electric detonator

国防科学技术工业委员会, Calibration testing work

WJ/T 9046-2004 Calibration specifications for industrial explosives detonation velocity tester
WJ/T 9047-2004 Calibration specifications for industrial electric detonator electrical parameter testers

IT-UNI, Calibration testing work

UNI 6342-1968
EC 1-2021 UNI EN 280-2021 Mobile elevating work platforms - Design calculations - Stability criteria - Construction - Safety - Examinations and tests
UNI 7008-1971 Measuring instruments. Handles for gauging members with taper shaft.

Fujian Provincial Standard of the People's Republic of China, Calibration testing work

JJF（闽）1085-2018 Calibration Specification for Portable Raman spectrum fast detection instruments

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Calibration testing work

IEEE N42.12-1980 CALIBRATION AND USAGE OF SODIUM IODIDE DETECTOR SYSTEMS (R 1991)

EEMUA - Engineering Equipment and Materials Users Association, Calibration testing work

PUB NO 175-1995 EEMUA Code of Practice for Calibration and Checking Process Analysers (Formerly IP Code 340)

Institute of Electrical and Electronics Engineers (IEEE), Calibration testing work

IEEE/ANSI N42.12-1980 American National Standard Calibration and Usage of Sodium Iodide Detector Systems
ANSI Std N42.12-1980 American National Standard Calibration and Usage of Sodium Iodide Detector Systems

IN-BIS, Calibration testing work

IS 4259-1967

NZ-SNZ, Calibration testing work

SAA/SNZ HB 86.1-1996 Guide to the Selection, Care, Calibration and Checking of Measuring Instruments in Industry Part 1: General Principles
SAA/SNZ HB 86.2-1998 Guide to the Selection, Care, Calibration and Checking of Measuring Instruments in Industry Part 2: Simple Length and Angle Measuring Instruments

AT-ON, Calibration testing work

ONORM EN 208-1994 Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
ONORM EN 27963-1992 Welds in steel - Calibration block No. 2 for ultrasonic examination of welds

American Society of Civil Engineers (ASCE), Calibration testing work

ASCE 3-91/9-91-1991 Standard Practice for Construction and Inspection of Composite Slabs

Association of German Mechanical Engineers, Calibration testing work

VDI/DGQ 3445 Blatt 1-1977 Statistical examination of exactly working of grinding machines; fundamentels
VDI/VDE/DGQ/DKD 2622 Blatt 15.1-2011 Calibration for measuring equipment for electrical quantities - Artificial mains networks
VDI/DGQ 3445 Blatt 4-1977 Statistical examination of exactly working of grinding machines; internal grinding machines
VDI/DGQ 3445 Blatt 5-1977 Statistical examination of exactly working of grinding machines; flat grinders
VDI/VDE 2629 Blatt 2-2012 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
VDI/VDE 3511 Blatt 4.4-2005 Temperature measurement in industry - Radiation thermometry - Calibration of radiation thermometers
VDI/DGQ 3445 Blatt 3-1977 Statistical examination of exactly working of grinding machines; centerless external cylindrical grinding machines

Acoustical Society of America (ASA), Calibration testing work

ASA S1.15 PART 5-2021 American National Standard Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison

Shaanxi Provincial Standard of the People's Republic of China, Calibration testing work

DB61/T 1327.3-2020 Qualification Accreditation of Inspection and Testing Institutions Part 3: Requirements for Confirmation of Equipment Verification and Calibration Results

Professional Standard - Certification and Accreditation, Calibration testing work

RB/T 197-2015 Guide on stating test and calibration results and compliance with specification

Professional Standard - Public Safety Standards, Calibration testing work

GA/T 1065-2013 Calibration specifications for test block of Micro-dose X-ray security inspection systems

AGMA - American Gear Manufacturers Association, Calibration testing work

97FTM1-1997 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
931-A02-2002 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears

Hebei Provincial Standard of the People's Republic of China, Calibration testing work

DB13/T 1416.8-2018 Specifications for the detection of occupational hazards in the workplace

International Commission on Illumination (CIE), Calibration testing work

CIE 210-2014 Photometry Using V(λ)-Corrected Detectors as Reference and Transfer Standards

海关总署, Calibration testing work

SN/T 5300-2021 Customs Technical Specifications Work Guide Entry-Exit Inspection and Quarantine Industry Standards