ZH
RU
ES

Gas pipeline installation

Gas pipeline installation, Total:498 items.

In the international standard classification, Gas pipeline installation involves: Petroleum, petroleum products and natural gas handling equipment, Installations in buildings, Equipment for the chemical industry, Pipeline components and pipelines, Equipment for petroleum and natural gas industries, Aerospace fluid systems and components, Wind turbine systems and other alternative sources of energy, Analytical chemistry, Medical equipment, Materials and components for railway engineering, Quality, Measurement of fluid flow, Transport, Railway engineering in general, Domestic, commercial and industrial heating appliances, Construction of waterways and ports, Railway rolling stock, Shipbuilding and marine structures in general, Fluid power systems, Protection against excessive pressure, Valves, Protection against dangerous goods, Aerospace engines and propulsion systems, Products of the chemical industry, Fluid storage devices, Protective equipment, Piezoelectric and dielectric devices, Electrical wires and cables, Power transmission and distribution networks, Electrical accessories, Semiconductor devices, Protection against fire, Company organization and management, Electric traction equipment, Electrical equipment for working in special conditions, Alarm and warning systems, Occupational safety. Industrial hygiene, ELECTRICAL ENGINEERING, Road engineering, Air quality, Wastes, Protection against crime, Audio, video and audiovisual engineering, Cargo equipment, Internal combustion engines for road vehicles, Rails and railway components, Commercial vehicles, Road vehicle systems, Beverages, Heat pumps, Electrical engineering in general, Compressors and pneumatic machines, Terminology (principles and coordination), Industrial automation systems, Burners. Boilers, Accident and disaster control, Bridge construction, Fibre optic communications, Explosion protection, Lamps and related equipment, Inorganic chemicals, Electronic tubes, Telecommunication systems, Rubber and plastics products, Protection against electric shock.


Standard Association of Australia （SAA）, Gas pipeline installation

  • PLUMBING AND GAS SET-2005 Plumbing and Gas Installations Set
  • AS 1697:2005 Installation and maintenance of steel pipe systems for gas
  • AS 3723:1989 Installation and maintenance of plastics pipe systems for gas
  • AS 2896:2011
  • AS 2896:1998 Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems
  • AS 2896:2021 Medical gas systems — Installation and testing of non-flammable medical gas pipeline systems
  • RUL PL.17-2002 Rulings to plumbing and piping systems Standards - Installation (Ruling to AS 3500.4-1994)
  • AS 3848.1:1999 Filling of portable gas cylinders - Decant filling of medical air and oxygen into portable cylinders - Safe procedures
  • AS 5034:2005 Installation and use of inert gases for beverage dispensing
  • RUL PL.1-2002 Rulings to plumbing and piping systems Standards - Installation of backflow prevention devices (Ruling to AS 3500.1-1992)
  • AS 4799:2000 Installation of underground utility services and pipelines within railway boundaries
  • RUL PL.5-2002 Rulings to plumbing and piping systems Standards - Installation of cisterns (Ruling to AS 3500.1-1992)
  • PLUMBING AND GAS SET (CD)-2005 Plumbing and Gas Installations Set on CD
  • AS/NZS 2381 Set:2008 Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance Set
  • AS 4292.2:2006 Railway safety management - Track, civil and electrical infrastructure
  • AS/NZS 2381.2:2006 Electrical equipment for explosive atmospheres - Selection, installation and maintenance - Flameproof enclosure ?d?

Professional Standard - Chemical Industry, Gas pipeline installation

Professional Standard - Aviation, Gas pipeline installation

  • HB 6666-1992 Dimensions of Omega Clamps for Fluid Line Installation
  • HB 6665-1992 Enveloping Dimensions of P-Clamps for Fluid Line Installation
  • HB 6483-1990 Aircraft Fuel System Piping Installation Requirements
  • HB 6755-1993 Aircraft hydraulic piping system design and installation requirements
  • HB 8459-2014 Design and installation requirements for hydraulic tubing system of commercial aircraft

Indonesia Standards, Gas pipeline installation

  • SNI 03-6899.4-2002 Laying pipes instalation-part 4: Installations of pipe and meter for town gas
  • SNI 03-6899.1-2002 Laying of installation pipes - Part 1: General spesification for laying underground gas installation pipes in industrial and commercial premies
  • SNI 03-6899.2-2002 Laying of installation pipes - Part 2: Purging procedure non domestic gas installation
  • SNI 03-3442-1993 Code for piezometer installation of open stand pipe tubing casagrande
  • SNI 03-6899.3-2002 Laying instalation pipe-part 3 : Soundness testing procedures for indistrial and commercial gas installations
  • SNI ISO 9170-1:2012 Terminal units for medical gas pipeline systems - Part 1: Terminals unit for use with compressed medical gases and vacuum

Group Standards of the People's Republic of China, Gas pipeline installation

  • T/CCGA 20002-2021 Safety technical requirements for gases filling hoses
  • T/NESIF 0021-2022 Technical requirements for pipeline installation of FRP fishing boats
  • T/AASE P003-2020 Safety technical conditions for gas cylinder filling stations for mixed gases
  • T/QGCML 1752-2023
  • T/CCGA 50009-2021 Safety technical regulation for filling gases of medical & food industry
  • T/CCGA 60003-2022 Safety technical rule of filling cylinders for gases fire extinguishing system
  • T/CEC 307-2020 Aluminum alloy spiral welded pipes for gas insulated transmission lines
  • T/FSQX 003-2021 Safety management specification for filling compressed hydrogen cylinders for vehicles
  • T/SGTX 001-2022 Specifications for Safety Management of Liquefied Petroleum Gas Cylinder Filling Stations
  • T/AASE P002-2020 Detailed Rules for the Safety Management of LPG Cylinder Filling Stations
  • T/FSGCA 2-2022 Guidelines for selection, installation and use of combustible gas alarm devices for industrial and commercial users of urban gas
  • T/CGAS 026.1-2023
  • T/CANSI 40-2021 Installation requirement of electrical equipment in explosive gas atmospheres for offshore engineering
  • T/CQGIA 1-2022 Technical regulations for the installation of self-closing valves for gas pipelines for household users

Aerospace, Security and Defence Industries Association of Europe (ASD), Gas pipeline installation

Jiangxi Provincial Standard of the People's Republic of China, Gas pipeline installation

  • DB36/T 338-1999 Operating procedures for the installation of gas pipelines for rural household biogas digesters

HU-MSZT, Gas pipeline installation

Society of Automotive Engineers (SAE), Gas pipeline installation

SE-SIS, Gas pipeline installation

Korean Agency for Technology and Standards (KATS), Gas pipeline installation

  • KS W ISO 8575:2009 Aerospace－Fluid systems－Hydraulic system tubing
  • KS B ISO 11119-1:2014 Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 L
  • KS C IEC 60079-11:2020 Explosive atmospheres — Part 11: Equipment protection by intrinsic safety “i”
  • KS C 6593-2007 Installation, operation and maintenance of toxic gas-Detection instruments：Hydrogen sulfide
  • KS P 1304-1995 Hose assemblied for use with medical gas systems
  • KS W ISO 8574:2009 Aerospace－Hydraulic system tubing－Qualification tests for bent tubes
  • KS P ISO 9170-2-2012(2017) Terminal units for medical gas pipeline systems－Part 2：Terminal units for anaesthetic gas scavenging systems
  • KS C IEC 60981-2003(2009) Extra-heavy duty rigid steel conduits for electrical installations
  • KS C IEC 60981-A-2014(2019) Extra-heavy duty rigid steel conduits for electrical installations
  • KS B ISO 6430-2004(2009) Pneumatic fliud power－Single rod cylinders, 1 000 kPa(10 bar) series, with integral mountings, bores from 32 mm to 250 mm－Mounting dimensions
  • KS R ISO 7652:2005 Road vehicles-Base-mounted air compressors, single cylinderV-belt drive-Mounting dimensions
  • KS R ISO 7652-2005(2010) Road vehicles - Base-mounted air compressors, single cylinder V-belt drive - Mounting dimensions
  • KS R ISO 7652:2015 Road vehicles - Base-mounted air compressors, single cylinder V-belt drive - Mounting dimensions
  • KS R ISO 12097-3-2008(2018) Road vehicles－Airbag components－Part 3：Testing of inflator assemblies
  • KS C 6591-2007 Installation, operation and maintenance of combustible gas detection instruments
  • KS B ISO 15218-2006(2011) Pneumatic fluid power－3/2 solenoid valves－Mounting interface surfaces
  • KS P ISO 9170-1-2012(2017) Terminal units for medical gas pipeline systems－Part 1：Terminal units for use with compressed medical gases and vacuum
  • KS C IEC 62275-2014(2019) Cable management systems — Cable ties for electrical installations
  • KS C 6591-2007(2018) Installation, operation and maintenance of combustible gas detection instruments
  • KS C IEC 61779-6:2003 Electrical apparatus for the detection and measurement of flammable gases－Part 6：Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
  • KS R ISO 7628-2:2005 Road vehicles-Thermoplastics tubing for air braking systems-Part 2:Mounting on vehicle and test methods
  • KS R ISO 7628-2-2005(2010) Road vehicles－Thermoplastics tubing for air braking systems－Part 2：Mounting on vehicle and test methods
  • KS C IEC 60614-1:2002 Conduits for electrical installations-Specification-Part 1:General requirements
  • KS C IEC 62275:2014 Cable management systems — Cable ties for electrical installations
  • KS C IEC 60614-1:2014 Conduits for electrical installations－Specification－Part 1：General requirements

International Organization for Standardization (ISO), Gas pipeline installation

  • ISO 8575:1990 Aerospace; fluid systems; hydraulic system tubing
  • ISO 23555-2:2022 Gas pressure safety and control devices for use in gas transmission, distribution and installations for inlet pressures up to and including 10 MPa — Part 2: Gas pressure regulator
  • ISO 11119-1:2012 Gas cylinders - Refillable composite gas cylinders and tubes - Design, construction and testing - Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
  • ISO/TS 10839:2000 Polyethylene pipes and fittings for the supply of gaseous fuels - Code of practice for design, handling and installation
  • ISO 15002:2000 Flow-metering devices for connection to terminal units of medical gas pipeline systems
  • ISO 23555-1:2022 Gas pressure safety and control devices for use in gas transmission, distribution and installations for inlet pressures up to and including 10 MPa — Part 1: General requirements
  • ISO 8574:2004 Aerospace - Hydraulic system tubing - Qualification tests for bent tubes
  • ISO 6430:1983 Pneumatic fluid power — Single rod cylinders with integral mountings — 10 bar (1 000 kPa) series — Bores from 32 to 250 mm — Mounting dimensions
  • ISO/DIS 23555-3 Gas pressure safety and control devices for use in gas transmission, distribution and installations for inlet pressures up to and including 10 MPa — Part 3: Safety shut-off devices
  • ISO 8574:1990 Aerospace; hydraulic system tubing; qualification tests
  • ISO/TS 10839:2022 Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation
  • ISO 6099:1982 Fluid power systems and components — Cylinders — Identification code for mounting dimensions and mounting types
  • ISO 7652:1983 Road vehicles; Base-mounted air compressors, single cylinder V-belt drive; Mounting dimensions
  • ISO/TS 17519:2019 Gas cylinders — Refillable permanently mounted composite tubes for transportation
  • ISO 2704:1998 Road vehicles - M10 × 1 spark-plugs with flat seating and their cylinder head housings
  • ISO 2344:1998 Road vehicles - M14 × 1,25 spark-plugs with conical seating and their cylinder head housings
  • ISO 1919:1976 Title missing - Legacy paper document
  • ISO 2344:1976 Title missing - Legacy paper document
  • ISO 2344:1972 Title missing - Legacy paper document
  • ISO 2705:1976 Title missing - Legacy paper document
  • ISO 2704:1976 Title missing - Legacy paper document
  • ISO 2345:1976 Title missing - Legacy paper document
  • ISO 2344:1975 Title missing - Legacy paper document
  • ISO 2345:1973 Title missing - Legacy paper document
  • ISO 2705:1999 Road vehicles - M12 × 1,25 spark-plugs with flat seating and their cylinder head housings
  • ISO 2345:1994 Road vehicles - M18×1,5 spark-plugs with conical seating and their cylinder head housing
  • ISO 4009:1977 Road vehicles — Towing vehicles — Mounting of electrical connections on rear cross members
  • ISO 9538:1996 Aerospace - Hydraulic tubing joints and fittings - Planar flexure test
  • ISO 2705:2006 Road vehicles - M12 x 1,25 spark-plugs with flat seating and their cylinder head housings
  • ISO 6430:1992 Pneumatic fluid power; single rod cylinders, 1000 kPa (10 bar) series, with integral mountings, bores from 32 mm to 250 mm; mounting dimensions
  • ISO 7628-2:1998 Road vehicles - Thermoplastics tubing for air braking systems - Part 2: Mounting on vehicle and test methods
  • ISO 7652:1983/Amd 1:1992 Road vehicles; base-mounted air compressors, single cylinder V-belt drive; mounting dimensions; amendment 1

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Gas pipeline installation

  • GB/T 7637-1987 Operation rules of construction and installation of biogas pipelines for peasant household
  • GB 7637-1987 Rural Household Biogas Pipeline Construction and Installation Operation Rules
  • GB 7230-1987 Gas detector tube units
  • GB/T 7230-2008 Gas detector tube measurement system
  • GB/Z 35588-2017 Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits
  • GB/T 29751-2013 Requirement for adoption and installation of piping compensatory couplings
  • GB 17264-1998 Safety specification for filling station of permanent gas cylinders
  • GB 17265-1998 Safety specification for filling station of liquefied gas cylinders
  • GB/T 14823.1-1993 Particular specifications for metal conduits for electrical installations
  • GB 50168-1992 Code for construction and acceptance of cable levels electric equipment installation engineering
  • GB 50168-2006 Code for construction and acceptance of cable system electric equipment installation engineering
  • GB 50168-2018 Construction and acceptance standards for cable lines in electrical installation engineering
  • GB/T 17194-1997 Conduits for electrical purposes--Outside diameters of conduits for electrical installations and threads of conduits and fittings
  • GB/T 17193-1997 Extra-heavy duty rigid steel conduits for electrical installations
  • GB/T 26329-2010 Pneumatic instruments driven by associated process gas.Safe installation and operating procedures.Guidelines
  • GB/T 13381.1-1992 Specification for conduits for electrical installations--General requirements
  • GB/T 14823.2-1993 Particular specifications for rigid plain conduits of insulating materials for electrical installations
  • GB/T 19949.3-2005 Road vehicle.Airbag components.Part 3:Testing of inflator assemblies
  • GB 50171-1992 Code for construction and acceptance of switchbeard outfit complete cubicle and secondary circuit electric equipment installation engineering
  • GB 50171-2012 Code for construction and acceptance of switchboard outfit complete cubicle and secondary circuit electric equipment installation engineering
  • GB/T 20041.1-2005 Conduit systems for electrical installations.Part 1: General requirements

International Code Council, Gas pipeline installation

Hubei Provincial Standard of the People's Republic of China, Gas pipeline installation

  • DB42/T 014-2002 Specifications for design and installation of rural household hydraulic biogas pipelines
  • DB42/T 1144-2016 Specification for installation and acceptance of stainless steel corrugated hose for gas

YU-JUS, Gas pipeline installation

European Committee for Standardization (CEN), Gas pipeline installation

  • CEN/TR 16787:2014 Industrial Gas Installation - Guideline
  • PD CEN/TR 16940:2016 Domestic gas installations - Recommendations for safety
  • EN 14382:2005+A1:2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
  • EN 14382:2002 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
  • EN 14382:2019 Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar)
  • prEN 50020-1992 Electrical apparatus for potentially explosive atmospheres; intrinsic safety i
  • prEN 737-1-1992 Medical gas pipeline systems; part 1: terminal units for compressed medical gases and vacuum
  • EN 14594:2005/AC:2005 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking
  • EN 13611:2007 Safety and Control Devices for Gas Burners and Gas-Burning Appliances - General Requirements
  • EN 13611:2000 Safety and Control Devices for Gas Burners and Gas-Burning Appliances - General Requirements

Danish Standards Foundation, Gas pipeline installation

  • DS 1102:1987 Installations in building. Calculation of installation spaces for pipellines
  • DS/EN 45545-7:2013 Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations
  • DS/EN 14382+A1/AC:2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
  • DS/EN 14382+A1:2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
  • DS 21003:2020 Railway safety management systems – Work related to infrastructure – Requirements for bodies providing audit and certification of railway safety management systems
  • DS/EN ISO 9170-2:2008 Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems
  • DS/HD 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • DS/EN ISO 7396-1/A1:2010 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 1: Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline throug
  • DS/EN ISO 9170-1:2008 Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum

Association Francaise de Normalisation, Gas pipeline installation

  • NF F01-082:1968 Railway transport equipment. Pipework. Fixing of non-metallic flexible pipes.
  • FD P45-208*FD CEN/TR 16940:2017 Domestic gas installations - Recommendations for safety
  • NF D36-136:2019 Gas installations - Dimensional characteristics of mechanical connections intended for installation in pipelines for as installations
  • NF F11-100:1995 Railway rolling stock. Quality of compressed air for pneumatic apparatuses and circuits use.
  • NF EN 45545-7:2013 Applications ferroviaires - Protection contre les incendies dans les véhicules ferroviaires - Partie 7 : exigences de sécurité incendie relatives aux installations de liquides inflammables et de gaz inflammables
  • NF E29-532:2005 Gas installations - Mechanical joint with flat gasket for pipes gas installations.
  • NF E29-532:2017 Gas installations - Mechanical joint with flat gasket for pipes gas installations
  • NF S90-116:2020 Medical gas pipeline distribution systems - Sockets and related probes for medical fluids - Design and installation
  • NF E29-175/IN1:2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar.
  • NF D36-136:2023 Installations de gaz - Caractéristiques dimensionnelles des raccordements mécaniques destinés à être installés sur les tuyauteries pour installations de gaz
  • NF E29-175:2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar.
  • NF F11-015:1984 Railway rolling stock. Air pipes. Coupling head for 25 mm main brake pipe.
  • NF F11-016:1981 Railway transport equipment. Air brake and air pipes. 25 mm brake-hose connecting nipple.
  • NF F55-646:1994 Railway fixed equipment. Electric conductors used for the device and rail connnection in the track circuits fitting the electrified lines.
  • NF A88-943:2005 Soudage et techniques connexes - Épreuve de qualification des soudobraseurs pour assemblages de sécurité sur les canalisations de distribution de gaz combustible - Assemblage de canalisations de gaz combustible dans les installations situées en ava...
  • NF F31-001:1972 Railway transport equipment. Soap dispenser with wall-fixing gauges-fixings.
  • NF F11-018:1981 Railway transport equipment. Air brake and air pipes. Flexible hoses for 25 mm pipes.
  • NF D36-109:2016 Hose tails for rubber tubing monted on certain gas-fired domestic apparatus using 3rd familly gaseous fuels distributed by gas cylinders and sealing caps
  • NF E39-004:2006 District heating - Hot or cold water transport and distribution networks - Particularities of installation.
  • NF E48-030*NF ISO 6099:2018 Fluid power systems and components - Cylinders - Identification code for mounting dimensions and mounting types
  • NF E29-743*NF EN ISO 7866:2012 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing
  • NF M50-015*NF EN 12279:2000 Gas supply systems - Gas pressure regulating installations on service lines - Functional requirements
  • NF EN 62870:2016 Installations électriques pour l'éclairage et le balisage des aérodromes - Circuits secondaires de sécurité dans des circuits série - Exigences générales de sécurité
  • NF A88-941:2013 Soudage et techniques connexes - Épreuve de qualification des soudeurs pour assemblages de sécurité sur les canalisations de distribution de gaz combustible - Assemblage de canalisations de gaz combustible dans les installations situées en aval de ...
  • NF E49-060:1990 Pneumatic fluid power. Directional control valve with four ports. Mounting surfaces of subplate. Pipe thread.
  • NF E49-066:1990 Pneumatic fluid power. Directional control valve with three ports. Mounting surfaces of subplate. Pipe thread.
  • NF EN 15069:2017 Dispositifs de raccordement de sécurité pour appareils à usage domestique utilisant les combustibles gazeux et alimentés par tuyau métallique onduleux
  • NF E29-536:2023 Installations de gaz - Raccords démontables à jonction sphéro-conique destinés à être installés sur les tuyauteries pour installations de gaz
  • NF C68-146:2009 Cable management systems - Cable ties for electrical installations.
  • NF C68-146*NF EN 62275:2015 Cable management systems - Cable ties for electrical installations
  • NF C68-110:1994 CONDUIT SYSTEMS FOR ELECTRICAL INSTALLATIONS. PART 1 : GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 50 086-1).
  • NF ISO 39001:2015 Systèmes de management de la sécurité routière - Exigences et recommandations de bonnes pratiques
  • NF R12-622:1987 Road vehicles. Base-mounted air compressors, single cylinder V-belt drive. Mounting dimensions.
  • NF C11-403*NF EN 62870:2016 Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements
  • NF E49-093*NF ISO 15218:2003 Pneumatic fluid power - 3/2 solenoid valves - Mounting interface surfaces.
  • NF F11-017:1981 Railway transport equipment. Air brake and air pipes. 25 mm half-couplings.
  • NF T81-202:1979 Transport and handling. Rail cars and road tankers. Permanent stations for bottom loading and unloading of pressurized liquefied or dissolved gases.
  • NF E29-532:2023 Installations de gaz - Raccords démontables à joints plats destinés à être installés sur les tuyauteries pour installations de gaz
  • NF C61-743-311*NF EN 61643-311:2014 Components for low-voltage surge protective devices - Part 311 : performance requirements ans test circuits for gas discharge tubes (GDT)
  • NF S95-162-1*NF EN ISO 9170-1:2020 Terminal units for medical gas pipeline systems - Part 1 : terminal units for use with compressed medical gases and vacuum
  • NF D36-392:2008 Safety and control devices for gas burners and gas burning appliances - General requirements.
  • NF D36-392:2011 Safety and control devices for gas burners and gas burning appliances - General requirements.
  • NF D36-392/IN2:2011 Safety and control devices for gas burners and gas burning appliances - General requirements.
  • NF T81-203:1979 Transport and handling rail cars and road tankers. Permanent stations for top loading and unloading of pressurized liquefied or dissolved gases.
  • NF F36-002:1974 RAILWAY TRANSPORT EQUIPMENT. INDUSTRIAL WAGONS. 50 MM AIR ADAPTOR COUPLING.

UY-UNIT, Gas pipeline installation

Association of German Mechanical Engineers, Gas pipeline installation

German Institute for Standardization, Gas pipeline installation

  • DIN 3383-1:2013 Connection of gas appliances - Part 1: Gas connection valves, safety hose assemblies
  • DIN EN 45545-7:2013-08 Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations; German version EN 45545-7:2013
  • DIN 33822:2009 Gas pressure regulators and safety devices for gas installations for inlet pressure up to 5 bar
  • DIN V 65900-13:1998 Aerospace series - Design and construction of flexible hoses and hose assemblies for fluids in liquid and gaseous condition - Installation (AECMA Technical Report TR 2675:1996 + Corrigendum 1997)
  • DIN 3389:1984 Isolating joints ready for installation into service pipes in gas and water supply; built-in-isolating joints; requirements and tests
  • DIN EN 14594 Berichtigung 1:2006 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking; German version EN 14594:2005, Corrgigenda to DIN EN 14594:2005-07; German version EN 14594:2005/AC:2005
  • DIN EN 14594:2005 Respiratory protective devices - Continuous flow compressed air line breathing apparatus - Requirements, testing, marking; German version EN 14594:2005
  • DIN ISO 15552 Berichtigung 1:2010-05 Pneumatik fluid power - Cylinders with detachable mountings, 1000 kPa (10 bar) series, bores from 32 mm to 320 mm - Basic, mounting and accessories dimensions (ISO 15552:2004), Corrigendum to DIN ISO 15552:2005-12 / Note: To be replaced by DIN ISO 1555...
  • DIN 43614-1:1979 Switchgear and controlgear conduits for pressure-gas pipelines; copper conduits
  • DIN 30693:2011-06 Safety devices against rupture of flexible tubes for LPG / Note: DIN 30693 (1980-07) remains valid alongside this standard until 2011-11-30.
  • DIN 65178-3:1985-12 Aerospace; configuration and installation of fluid pipelines; tube assemblies, manufacture
  • DIN 65178-2:1985-12 Aerospace; configuration and installation of fluid pipelines; tube assemblies, design
  • DIN 4676:1955 Compressed gas equipment; connectors for vehicle containers and barrels, for compressed and liquefied gases
  • DIN EN ISO 9170-2:2009-09 Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008); German version EN ISO 9170-2:2008
  • DIN 5593:1994 Compressed air equipment for rail vehicles - Check valves - Installation and companion dimensions
  • DIN 43880:1988 Built-in equipment for electrical installations; overall dimensions and related mounting dimensions
  • DIN 5594:1994 Compressed air equipment for rail vehicles - Double check valves - Installation and companion dimensions
  • DIN EN ISO 9170-1:2020-09 Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2017); German version EN ISO 9170-1:2020
  • DIN ISO 8139:2008 Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Rod end spherical eyes - Mounting dimensions (ISO 8139:1991); English version of DIN ISO 8139-2008-01
  • DIN 3536:2018-09 Lubricants for gas valves in indoor installation, gas distribution and gas transportation pipe lines / Note: This standard is part of the DVGW body of rules.
  • DIN CEN/TS 45545-7:2009 Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations; German version CEN/TS 45545-7:2009
  • DIN ISO 2344:2000 Road vehicles - M14 × 1,25 spark plugs with conical seating and their cylinder head housing (ISO 2344:1998)
  • DIN 65178-1:1985-12 Aerospace; configuration and installation of fluid pipelines; survey and definitions
  • DIN EN 13611:2008 Safety and control devices for gas burners and gas burning appliances - General requirements; English version of DIN EN 13611:2008-02
  • DIN ISO 8140:2008 Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Rod end clevis - Mounting dimensions (ISO 8140:1991); English version of DIN ISO 8140-2008-01

ZA-SANS, Gas pipeline installation

  • SANS 10224:1990 Non-flammable medical gas pipeline systems
  • SANS 50270:1994 Respiratory protective devices - Compressed air line breathing apparatus incorporating a hood - Requirements, testing, marking
  • SANS 10222-5-1-3:2007 Electrical security installations Part 5-1-3: CCTV installations - CCTV surveillance systems for use in security applications - Installation, planning and implementation requirements
  • SANS 10222-5-2:2007 Electrical security installations Part 5-2: CCTV installations - Application guidelines
  • SANS 60423:1993 Conduits for electrical purposes - Outside diameters of conduits for electrical installations and threads for conduits and fittings
  • SANS 10222-5-1-5:2003 Electrical security installations Part 5-1-5: CCTV installations - CCTV surveillance systems for use in security applications - Maintenance requirements
  • SANS 10222-5-1-1:2007 Electrical security installations Part 5-1-1: CCTV installations - CCTV surveillance systems for use in security applications - Operational requirements
  • SANS 1156-2:2010 Hose for liquefied petroleum gas (LPG) Part 2: Hose and tubing for use in LPG vapour phase and LPG-air installations
  • SANS 10222-5-1-2:2007 Electrical security installations Part 5-1-2: CCTV installations - CCTV surveillance systems for use in security applications - System design requirements
  • SANS 1156-2:2007 Hose for liquefied petroleum gas (LPG) Part 2: Hose and tubing for use in LPG vapour phase and LPG-air installations
  • SANS 60614-1:1994 Conduits for electrical installations - Specification Part 1: General requirements

ES-AENOR, Gas pipeline installation

British Standards Institution (BSI), Gas pipeline installation

  • BS PD CEN/TR 16940:2016 Domestic gas installations. Recommendations for safety
  • BS 6891:2015 Specification for the installation and maintenance of low pressure gas installation pipework of up to 35 mm (R1?) on premises
  • BS EN 45545-7:2013 Railway applications. Fire protection on railway vehicles. Fire safety requirements for flammable liquid and flammable gas installations
  • BS EN 50122-1:2022 Railway applications. Fixed installations. Electrical safety, earthing and the return circuit - Protective provisions against electric shock
  • BS EN 14382:2005+A1:2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
  • BS EN 14382:2005 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
  • BS EN ISO 9170-1:2020 Terminal units for medical gas pipeline systems - Terminal units for use with compressed medical gases and vacuum
  • BS EN 12252:2014 LPG equipment and accessories. Equipping of LPG road tankers
  • BS ISO 8574:2008 Aerospace. Hydraulic system tubing. Qualification tests for bent tubes
  • BS EN 61643-311:2001 Low voltage surge protective devices - Specification for gas discharge tubes (GDT)
  • BS EN 61643-311:2002 Low voltage surge protective devices - Specification for gas discharge tubes (GDT)
  • BS 6891:2005 Installation of low pressure gas pipework of up to 35 mm (R11/4) in domestic premises (2nd family gas) - Specification
  • BS 6891:1998 Specification for installation of low pressure gas pipework of up to 28 mm (R1) in domestic premises (2nd family gas)
  • BS EN 14382:2002 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for operating pressure up to 100 bar
  • BS ISO 4126-10:2010 Safety devices for protection against excessive pressure. Sizing of safety valves for gas/liquid two-phase flow
  • BS ISO 6981:1992 Hydraulic fluid power. Cylinders. Rod end plain eyes. Mounting dimensions
  • BS 1123-1:1987 Safety valves, gauges and fusible plugs for compressed air or inert gas installations - Code of practice for installation
  • BS EN 62870:2015 Electrical installations for lighting and beaconing of aerodromes. Safety secondary circuits in series circuits. General safety requirements
  • BS DD CEN/TS 45545-7:2009 Railway applications — Fire protection on railway vehicles Part 7: Fire safety requirements for flammable liquid and flammable gas installations
  • BS EN 60079-29-2:2015 Tracked Changes. Explosive atmospheres. Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • BS EN 60794-3-50:2008 Optical fibre cables - Outdoor cables - Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes
  • DD CLC/TS 50430-2005 Optical fibre cables-Gas pipe cables-Family specification for cables to be installed in high pressure gas pipes
  • BS ISO 8140:1995 Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Rod end clevis - Mounting dimensions
  • BS ISO 8139:1995 Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Rod end spherical eyes - Mounting dimensions
  • BS EN 13611:2007 Safety and control devices for gas burners and gas burning appliances. General requirements
  • BS EN 13611:2007+A2:2011 Safety and control devices for gas burners and gas burning appliances. General requirements
  • BS ISO 8139:2018 Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Mounting dimensions of rod-end spherical eyes
  • BS ISO 6099:2018 Tracked Changes. Fluid power systems and components. Cylinders. Identification code for mounting dimensions and mounting types

European Association of Aerospace Industries, Gas pipeline installation

  • AECMA TR 2674-1997 Luft- Und Raumfahrt Gestaltung Und Ausfuhrung Von Leitungen Fur Flussige Und Gasformige Medien Rohrleitungen, Einbau Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Rigid Lines, Installation Serie Aerospati
  • AECMA TR 2675-1996 Serie Aerospatiale Conception Et Realisation De Tuyaux Et Tuyauteries Flexibles Pour Fluides Liquide Et Gazeux, Installation Edition 1
  • AECMA TR 2678-2001 Aerospace Series Design and Construction of Pipelines for Fluids in Liquid or Gaseous Condition Design of Rigid Lines Edition 1

CZ-CSN, Gas pipeline installation

American National Standards Institute （ANSI), Gas pipeline installation

  • ANSI Z83.8b-2004 Gas Unit Heaters and Gas-Fired Duct Furnaces
  • ANSI Z21.8-1994 Installation of Domestic Gas Conversion Burners
  • ANSI Z21.60-2012 Standard for Decorative Gas Appliances for Installation in Solid Fuel Burning Fireplaces (same as CSA 2.26)
  • ANSI/ASTM F1804:2008 Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
  • ANSI/UL 21a-2010 Standard for Safety for LP-Gas Hose
  • ANSI/UL 407-2004 Standard for Safety for Manifolds for Compressed Gases
  • ANSI Z83.8-2005 Gas Unit Heaters and Gas-Fired Duct Furnaces (same as CSA 2.6)
  • ANSI Z21.84-2012 Standard for Manually Lighted, Natural Gas Decorative Gas Appliances for Installation in Solid-Fuel Burning Fireplaces

IL-SII, Gas pipeline installation

CEN - European Committee for Standardization, Gas pipeline installation

  • PD CEN/TS 45545-7:2009 Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations
  • EN 14594:2018 Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements@ testing and marking
  • PREN 14382-2016 Gas safety shut-off devices for inlet pressure up to 100 bar
  • EN 13611:2019 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements

AENOR, Gas pipeline installation

  • UNE-EN 45545-7:2013 Railway applications. Fire protection on railway vehicles. Part 7: Fire safety requirements for flammable liquid and flammable gas installations
  • UNE-EN 14382:2005+A1:2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
  • UNE-HD 60364-5-557:2014 Low-voltage electrical installations - Part 5-557: Selection and erection of electrical equipment - Auxiliary circuits
  • UNE 60715-2:2013 Flexible hoses for connection of gas receiving installations to gas-fired appliances. Metal hose assemblies with safety gas connection valves and thread. Part 2: Stainless steel flexible hose assemblies.
  • UNE 60670-11:2014 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 11: Operations on installations pipework in service.
  • UNE 26525:2007/1M:2009 Road vehicles. Inspection of the cylinder installation and verification of high pressure cylinders for the on-board storage of natural gas as fuel for road vehicles.
  • UNE 26525:2007 Road vehicles. Inspection of the cylinder installation and verification of high pressure cylinders for the on-board storage of natural gas as fuel for road vehicles.
  • UNE-HD 60364-5-54:2015 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • UNE-EN ISO 7396-1:2007/A1:2010 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 1: Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline throug
  • UNE 60670-7:2014 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 7: Installation and connection requirements for gas appliances.
  • UNE 60670-5:2014 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 5: Housing for meters installation.
  • UNE 60715-1:2013 Flexible hoses for connection of gas receiving installations to gas-fired appliances. Metal hose assemblies with safety gas connection valves and thread. Part 1: Elastomeric packed metallic stripwound flexible hose assemblies.
  • UNE-EN ISO 9170-2:2008 Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO/FDIS 9170-2:2008)
  • UNE 60670-8:2014 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 8: Pressure tightness tests for receiving installation pipework

未注明发布机构, Gas pipeline installation

  • BS EN 45545-7:2013(2015) Railway applications — Fire protection on railway vehicles Part 7 : Fire safety requirements for flammable liquid and flammable gas installations
  • CAN/UL/ULC 407-2022 UL Standard for Safety Manifolds for Compressed Gases
  • BS EN 737-4:1998 Medical gas pipeline systems Part 4: Terminal units for anaesthetic gas scavenging systems
  • ISO 8170-1:2008 Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum
  • BS ISO 6431:1992(1999) Pneumatic fluid power — Single rod cylinders, 1000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm — Mounting dimensions

VE-FONDONORMA, Gas pipeline installation

Professional Standard-Ships, Gas pipeline installation

  • CB 1063-1987 Man-hour quota for shipbuilding pipeline manufacturing and installation
  • CB/Z 210-2004 Specification for manufacture fitting and testing of submarine piping
  • CB/Z 210-1984 Submarine piping manufacturing, installation and testing technical requirements
  • CB/T 3605-1993 Installation quality requirements of exhaust pipe and muffler
  • CB/T 3609-1993 Inert gas system installation and performance test quality requirements
  • CB/T 4521-2022 Safety management regulations for industrial pipelines and gas rubber hoses in shipping industry enterprises

Professional Standard - Machinery, Gas pipeline installation

  • JB/T 7377-2007 Single rod cylinders with integral mountings, bores form 32mm to 250mm. Mounting dimensions
  • JB/T 7377-1994 The installation size of integral single-rod cylinder with cylinder inner diameter of 32~250mm

Lithuanian Standards Office , Gas pipeline installation

  • LST EN 14382-2005+A1-2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
  • LST EN 14382-2005+A1-2009/AC-2009 Safety devices for gas pressure regulating stations and installations - Gas safety shut-off devices for inlet pressures up to 100 bar
  • LST EN ISO 9170-2:2008 Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008)
  • LST EN ISO 7396-1:2007/A1:2010 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 1: Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline throug

GOSTR, Gas pipeline installation

  • GOST R 58424-2019 Safety devices for gas pressure regulating stations and installations. Gas safety shut-off devices for inlet pressures up to 10 MPa

Jilin Provincial Standard of the People's Republic of China, Gas pipeline installation

Institute of Electrical and Electronics Engineers (IEEE), Gas pipeline installation

  • IEEE Std 524-1992 IEEE Guide to the Installation of Overhead Transmission Line Conductors
  • IEEE Std 524-2003 IEEE Guide to the Installation of Overhead Transmission Line Conductors
  • ANSI/IEEE Std 524-1980 IEEE Guide to the Installation of Overhead Transmission Line Conductors
  • IEEE Std 524-2016 IEEE Guide for the Installation of Overhead Transmission Line Conductors
  • IEEE 524A-1993 Guide to grounding during the installation of overhead transmission line conductors; Supplement to IEEE Guide to the installation of overhead transmission line conductors
  • IEEE P524/D1, February 2015 IEEE Draft Guide to the Installation of Overhead Transmission Line Conductors
  • IEEE Std 524a-1993 IEEE Guide to Grounding During the Installation of Overhead Transmission Line Conductors
  • NFPA (Fire) MGHB12 Medical Gas and Vacuum Systems Installation Handbook, 2012 Edition
  • NFPA (Fire) MGHB15 Medical Gas and Vacuum Systems Installation Handbook, 2015 Edition
  • IEEE Std C37.35-1976 Guide for the application, installation, operation, and maintenance of high-voltage air disconnecting and load interrupter switches

RO-ASRO, Gas pipeline installation

  • STAS 8589-1970 IDENTIFICATION COLOURS FOR PIPES CONVEYING FLUIDS IN LIQUID OR GASEOUS CONDITION IN LAND INSTALLATIONS AND ON BOARD SHIPS
  • STAS 9193-1973 ELECTRICAL INSTALLATIONS IN FLAME-PROOF MINE WORKS Design and mounting rules
  • STAS 9954/1-1974 ELECTRICAL INSTALLATIONS AND EQUIPMEXTS IN AREAS WIT1I R1SK OF EXPLOSION CAUSED BY FLAMMABLE GASES AND LIQUIDS De〓gn and mounting rules

RU-GOST R, Gas pipeline installation

  • GOST R EN 14594-2011 Occupational safety standards system. Respiratory protective devices. Continuous flow compressed air line breathing apparatus. Requirements, testing, marking
  • GOST 30852.4-2002 Electrical apparatus for explosive gas atmospheres. Part 3. Spark-test apparatus for intrinsically-safe circuits
  • GOST 23357-1978 Threaded pipeline connections. Joint washers for radial mounting. Construction
  • GOST R 50571.5.54-2013 Low-voltage electrical installations. Part 5-54. Selection and erection of electrical equipment. Earthing arrangements, protective conductors and protective bonding conductors
  • GOST R 12.4.275-2012 Occupational safety standards system. Respiratory protective devices. Poweredatmospheric air supply hose apparatus with helmet. Technical requirements. Test methods. Marking
  • GOST R 52549-2006 Quality and safety management system in manufacturing of electric equipment
  • GOST R 52549-2012 Quality and safety management system in manufacturing of electric equipment
  • GOST 26460-1985 Air separation products. Gases. Cryogens. Packing, marking, transportation and storage
  • GOST IEC 60079-29-2-2013 Explosive atmospheres. Part 29-2. Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
  • GOST R 55209-2012 Safety and control devices for gas burners and gas burning appliances. General requirements

NO-SN, Gas pipeline installation

  • NS 6236-1982 Marine industry - Air, sounding and filling pipes - Assembly and mounting examples

工业和信息化部, Gas pipeline installation

  • JB/T 13885-2020 Safety shut-off valve for gas pressure regulating device
  • JB/T 13736-2019 Technical specifications for installation of tubular flue gas heat exchangers
  • JBT13736-2019 Technical specifications for installation of tubular flue gas heat exchangers

Defense Logistics Agency, Gas pipeline installation

Compressed Gas Association (U.S.), Gas pipeline installation

  • CGA PS-40-2015 Requirements for installers of bulk medical gas supply systems

Qinghai Provincial Standard of the People's Republic of China, Gas pipeline installation

U.S. Air Force, Gas pipeline installation

Military Standard of the People's Republic of China-General Armament Department, Gas pipeline installation

  • GJB 3054-1997 Aircraft hydraulic piping system design and installation requirements

Professional Standard - Railway, Gas pipeline installation

  • TB/T 3258-2011 Assembly technical specification for electric locomotive air piping
  • TB/T 2310-1992 Gas discharge tubes for lightning protection of railway signaling equipment

KR-KS, Gas pipeline installation

  • KS C IEC 60079-11-2020 Explosive atmospheres — Part 11: Equipment protection by intrinsic safety “i”
  • KS P ISO 9170-2-2012(2022) Terminal units for medical gas pipeline systems－Part 2：Terminal units for anaesthetic gas scavenging systems
  • KS R ISO 12097-3-2008(2023) Road vehicles－Airbag components－Part 3：Testing of inflator assemblies
  • KS C 6591-2007(2023) Installation, operation and maintenance of combustible gas detection instruments
  • KS P ISO 9170-1-2022 Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum

BE-NBN, Gas pipeline installation

  • NBN-EN 50086-1-1994 Conduit systems for electrical installations Part 1: General requirements
  • NBN-EN 50086-2-4-1994 Conduit systems for electrical installations Part 2-4 : Particular requirements for conduit systems buried underground

Underwriters Laboratories (UL), Gas pipeline installation

未注明发布机构, Gas pipeline installation

  • BS EN 45545-7:2013(2015) Railway applications — Fire protection on railway vehicles Part 7 : Fire safety requirements for flammable liquid and flammable gas installations
  • CAN/UL/ULC 407-2022 UL Standard for Safety Manifolds for Compressed Gases
  • BS EN 737-4:1998 Medical gas pipeline systems Part 4: Terminal units for anaesthetic gas scavenging systems
  • ISO 8170-1:2008 Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum
  • BS ISO 6431:1992(1999) Pneumatic fluid power — Single rod cylinders, 1000 kPa (10 bar) series, with detachable mountings, bores from 32 mm to 320 mm — Mounting dimensions

AT-ON, Gas pipeline installation

  • ONORM E 2790-1991
  • ONORM M 7356-1997 Pressure vessels to contain air or nitrogen as well as resulting loaded liquids - Installation, equipment, Operation
  • ONORM E 6500-1989 Electrical Installation materiall; outside diameters and threads of conduits for electrical installations and fittings
  • ONORM M 7323/A1-2001 Installation of stationary pressure vessels for the storage of gases (Amendment)
  • ONORM M 7323-1995 Installation of stationary pressure vessels or the storage of gases
  • ONORM ISO 5599 Teil.1:1983 Pneumatic fluid power; five-port directional control valves; mounting surface; general

Professional Standard - Nuclear Industry, Gas pipeline installation

National Fire Protection Association (NFPA), Gas pipeline installation

Henan Provincial Standard of the People's Republic of China, Gas pipeline installation

  • DB4102/T 010-2020 Installation and construction requirements of gas Roots flowmeter
  • DB4102/T 011-2020 Gas turbine flowmeter installation and construction requirements
  • DB4102/T 009-2020 Gas ultrasonic flowmeter installation and construction requirements
  • DB4102/T 014-2020 Installation and use requirements for combustible gas detection and alarm
  • DB41/T 1888-2019 Specification for supervision and inspection of installation of organic heat carrier gas phase furnace

Jiangsu Provincial Standard of the People's Republic of China, Gas pipeline installation

  • DB3202/T 1039-2022 Guidelines for Safety Management of Electrical Lines in Industrial and Trade Enterprises
  • DB3212/T 1135-2023 Technical Specifications for Fully Prefabricated and Integrated Installation and Construction of Highway and Bridge Engineering

American Society for Testing and Materials (ASTM), Gas pipeline installation

  • ASTM E1957-04 Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers
  • ASTM F1804-08 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
  • ASTM E1957-04(2010) Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers
  • ASTM D6088-06(2022) Standard Practice for Installation of Geocomposite Pavement Drains
  • ASTM E1957-04(2018) Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers
  • ASTM F1804-08(2012) Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
  • ASTM F1804-03 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation

Shandong Provincial Standard of the People's Republic of China, Gas pipeline installation

  • DB37/T 4184-2020 Safety technical conditions for filling stations of cryogenic liquefied gas cylinders
  • DB37/T 3650-2019 Implementation guidelines for the construction of safety production risk management and control and hidden danger investigation and governance systems for gas filling enterprises
  • DB37/T 3138-2018 Detailed Rules for the Hierarchical Management and Control System of Safety Production Risks of Enterprises in the Highway and Waterway Industry

Professional Standard - Aerospace, Gas pipeline installation

  • QJ 920A-1996 General technical requirements for final assembly of projectile (arrow) body piping system
  • QJ 3293-2008 Safety management requirements for solid missile final assembly test

NL-NEN, Gas pipeline installation

  • NEN 3530-1970 Flexible non-metallic conduits for e/ectr/co/ installations

Canadian Standards Association (CSA), Gas pipeline installation

  • CSA Z7396.1-09-2009 Medical gas pipeline systems ?Part 1: Pipelines for medical gases and vacuum Second Edition [Superseded: CSA Z305.1-92-CAN/CSA, CSA Z305.1-92-CAN/CSA]
  • CSA 2.6-2006-2006 Gas Unit Heaters and Gas-Fired Duct Furnaces Third Edition
  • CSA/AM CSA/ANSI/IAS NGV 4.4-1999 Breakaway Devices for Natural Gas Dispensing Hoses and Systems First Edition; CSA 12.54-M99

International Electrotechnical Commission (IEC), Gas pipeline installation

  • IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
  • IEC 60364-5-54:2021 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • IEC TS 61081:1991 Pneumatic instruments driven by associated process gas - Safe installation and operating procedures - Guidelines
  • IEC TR 61081:1991 Pneumatic instruments driven by associated process gas; safe installation and operating procedures; guidelines
  • IEC 60079-14:2013/ISH1:2017 Explosive Atmospheres - Part 14: Electrical installations design, selection and erection; Interpretation Sheet 1
  • IEC 60364-5-54:2011+AMD1:2021 CSV Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • IEC 60364-5-54:2011/AMD1:2021 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors; Amendment 1
  • IEC TR2 61911:1998 Live working - Installation of distribution line conductors - Stringing equipment and accessory items

Guangxi Provincial Standard of the People's Republic of China, Gas pipeline installation

  • DB4511/T 0002-2023 Safety management specification for bottled liquefied petroleum gas filling and distribution

Professional Standard - Petroleum, Gas pipeline installation

  • SY/T 6519-2010 Classification of flammable liquids,gases,or vapors and of hazardous locations for electrical installations
  • SY 5984-2014 Safety rules for grounding installation of oil (gas) field vessel、 pipeline and load (unload) equipment
  • SY/T 6519-2017 Classification of flammable liquids, gases or vapors and division of hazardous areas for electrical installations in chemical production areas

Guizhou Provincial Standard of the People's Republic of China, Gas pipeline installation

  • DB52/T 1034-2015 Safety management specification for compressed natural gas vehicle cylinder filling
  • DB52/T 1034-2019 Safety management specification for compressed natural gas vehicle cylinder filling

Anhui Provincial Standard of the People's Republic of China, Gas pipeline installation

  • DB34/T 973-2020 Safety management specification for compressed natural gas vehicle cylinder filling

CENELEC - European Committee for Electrotechnical Standardization, Gas pipeline installation

  • EN 50241-2:1999 Specification for Open Path Apparatus for the Detection of Combustible or Toxic Gases and Vapours - Part 2: Performance Requirements for Apparatus for the Detection of Combustible Gases

SAE - SAE International, Gas pipeline installation

ES-UNE, Gas pipeline installation

  • UNE-HD 60364-5-557:2014/A11:2016 Low-voltage electrical installations - Part 5-557: Selection and erection of electrical equipment - Auxiliary circuits
  • UNE-EN 62870:2016 Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements
  • UNE-EN 50244:2018 Electrical apparatus for the detection of combustible gases in domestic premises - Guide on the selection, installation, use and maintenance
  • UNE-EN ISO 9170-1:2021 Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2017)
  • UNE-HD 60364-5-54:2015/A11:2018 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • UNE-HD 60364-5-54:2015/A1:2023 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors

IN-BIS, Gas pipeline installation

Canadian Standards Association/American National Standards , Gas pipeline installation

Hebei Provincial Standard of the People's Republic of China, Gas pipeline installation

  • DB13/T 1831-2013 Safety management specification for filling natural gas cylinders for vehicles in Hebei Province
  • DB13/T 5022-2019 Safety management specification for gas protection stations in metallurgical enterprises

国家能源局, Gas pipeline installation

  • NB/T 34047-2017 Installation specifications for split air source heat pump water heaters
  • SY/T 5984-2020 Safety Specifications for Grounding Devices of Oil (Gas) Field Containers, Pipelines and Loading and Unloading Facilities

TR-TSE, Gas pipeline installation

  • TS 949-1971 IDENTIFICATION COLOURS FOR PIPES CONVEYING FLUIDS ?N LIQUID OR GASEOUS, CONDITION ?N LAND INSTALLATIONS AND ON BOARD SHIPS
  • TS 2862-1977 PVC Flexible B — Conduits And Couplers For Electrical Installations

US-CFR-file, Gas pipeline installation

  • CFR 46-182.455-2014 Shipping. Part182:Machinery installation. Section182.455:Fuel piping.
  • CFR 46-154.522-2014 Shipping.PART 154:Safety standards for self-propelled vessels carrying bulk liquefied gases. Section154.522:Materials for piping.

NZ-SNZ, Gas pipeline installation

  • NZS 7647:1979 Code of practice for THE INSTALLATION OF POLYETHYLENE PIPE FOR GAS RETICULATION

国家市场监督管理总局、中国国家标准化管理委员会, Gas pipeline installation

  • GB/T 39001-2019 Road traffic safety (RTS) management systems—Requirements with guidance for use

European Committee for Electrotechnical Standardization（CENELEC）, Gas pipeline installation

  • HD 393-1979 Outside Diameters of Conduits for Electrical Installations and Threads for Conduits and Fittings
  • EN 62275:2015 Cable management systems - Cable ties for electrical installations
  • HD 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • HD 60364-5-54:2011/A1:2022 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • EN 62870:2015 Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements
  • HD 394.1-1979 Specification for Conduits for Electrical Installations Part 1 General Requirements

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Gas pipeline installation

  • TR 2675-1996 Serie Aerospatiale Conception Et Realisation De Tuyaux Et Tuyauteries Flexibles Pour Fluides Liquide Et Gazeux@ Installation (Edition 1)

PL-PKN, Gas pipeline installation

  • PN M73776-1988 Pneumatic fluid power Rod end clevis of piston rods of cylinders Mounting dimensions
  • PN M73772-1986 Pneumatic fluid power Single rod cylinders with integral mountings Mounting dimensions
  • PN M73775-1988 Pneumatic fluid power Rod end spherical eyes of piston rods of cylinders Mountina dimensions

VN-TCVN, Gas pipeline installation

  • TCVN 5331-1991 Acetylene installations.Safety requirements for construction of gas generators
  • TCVN 7447-5-54-2015 Low - voltage electrical installations .Part 5-54:Selection and erection of electrical equipment - Earthing arrangements and protective conductors
  • TCVN 7614-4-2007 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels.Part 4: Code of practice for design, handling and installation

GB-REG, Gas pipeline installation

ISA - International Society of Automation, Gas pipeline installation

  • ISA 92.00.02-2013 Installation@ Operation@ and Maintenance of Toxic Gas-Detection Instruments
  • ISA RP12.13 PT II-1987 Installation@ Operation@ and Maintenance of Combustible Gas Detection Instruments

Japanese Industrial Standards Committee (JISC), Gas pipeline installation

  • JIS F 8067:1986 Electrical installations in ships Part 304 Equipment -- Semiconductor convertors
  • JIS C 60364-5-54:2023 Low-voltage electrical installations -- Part 5-54: Selection and erection of electrical equipment -- Earthing arrangements and protective conductors
  • JIS C 5381-311:2016 Components for low-voltage surge protective devices -- Part 311: Performance requirements and test circuits for gas discharge tubes (GDT)

Heilongjiang Provincial Standard of the People's Republic of China, Gas pipeline installation

  • DB23/T 3493-2023 Specifications for safety settings of backup power supply for gas alarm devices

BR-ABNT, Gas pipeline installation

Professional Standard - Post and Telecommunication, Gas pipeline installation

  • YD/T 3248.3-2017 Installation performance test methods for telecommunication optical fibre cables.Part 3: Microduct route verification

National Association of Pipe Fabricators (NAPF), Gas pipeline installation

  • PFI ES-49-2013 GUIDELINES FOR INSTALLATION OF INTEGRALLY REINFORCED BRANCH CONNECTION FITTINGS

American Society of Civil Engineers (ASCE), Gas pipeline installation

  • ASCE 35-01-2002 Guidelines for Quality Assurance of Installed Fine-Pore Aeration Equipment

Shaanxi Provincial Standard of the People's Republic of China, Gas pipeline installation

  • DB61/T 969-2015 Supervision and inspection rules for the installation of polyethylene pipes for gas

Professional Standard - Labor and Labor Safety, Gas pipeline installation

  • LD/T 99.11-1997 Municipal engineering labor quota gas pipeline network installation project

International Telecommunication Union (ITU), Gas pipeline installation

  • ITU-T L.108-2008 Optical fibre cable elements for microduct blowing-installation application

API - American Petroleum Institute, Gas pipeline installation

  • API RP 500C-1984 Classification of Locations for Electrical Installations at Pipeline Transportation Facilities (SECOND EDITION)

Professional Standard - Energy, Gas pipeline installation

  • NB/T 25113-2020 Technical regulations for the design and installation of hydrogen double-wall pipes in nuclear power plants

CN-DB 4, Gas pipeline installation

  • DB4407/T 100-2023 Safety production management regulations for gas operation and filling units

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Gas pipeline installation

  • IEEE 524A 1993 SUPP-1993 Supplement to IEEE Guide to Grounding During the Installation of Overhead Transmission Line Conductors

  pipeline installation, Hydraulic pipeline installation, Pipeline installation, Pipeline installation, pipeline installation, Piping system installation, pipeline gas, medical gas pipeline, Gas generator installation, gas line, Specialty Gas Pipeline, Gas pipeline design, Gas piping system, gas line, Gas pipeline installation, Gas pipeline design, Five items of gas pipeline, Gas detector installation, Hydraulic piping system design and installation requirements, Five items of gas pipeline.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved