ZH
RU
ES

Humidity measurement

Humidity measurement, Total:99 items.

In the international standard classification, Humidity measurement involves: Physics. Chemistry, Welding, brazing and soldering, Geology. Meteorology. Hydrology, Fibre optic communications, Environmental testing, Paper and board, Products of the chemical industry, Road vehicle systems, Metrology and measurement in general, Measurement of fluid flow, Test conditions and procedures in general, Rubber and plastics products, Construction materials, Pipeline components and pipelines, Paints and varnishes, Semiconductor devices, Packaging materials and accessories, Adhesives.

SE-SIS, Humidity measurement

SIS SEN 43 16 03-1971 Environmental testing. Damp heat Test Ca, steady state
SIS SEN 43 16 04-1971 Environmental testing. Damp heat Test Da and Db, cyclic

Association of German Mechanical Engineers, Humidity measurement

VDI/VDE 3514 Blatt 2-2013 Measurement of humidity - Methods of measurement
DVS 2603-1-1977 Testing of the soft solderability; testings of wetting for soft soldering

Association Francaise de Normalisation, Humidity measurement

NF C20-403:1990 Environmental Testings Test Methods Guidance for Damp Heat Tests
NF EN ISO 12687:1998 Revêtements métalliques - Essais de porosité - Essai à la fleur de soufre par voie humide.
NF EN 60068-2-78:2013 Essais d'environnement - Partie 2-78 : essais - Essai Cab : chaleur humide, essai continu
NF A89-400:1991 Soldering - Measurement of Solderability Wetting balance tests method
NF EN 60793-1-50:2018 Fibres optiques - Partie 1-50 : méthodes de mesure et procédures d'essai - Essais de chaleur humide (état continu)
NF EN 60068-2-30:2006 Essais d'environnement - Partie 2-30 : essais - Essai Db : essai cyclique de chaleur humide (cycle de 12 h + 12 h)
NF C93-840-1-50*NF EN 60793-1-50:2018 Optical fibres - Part 1-50 : measurement methods and test procedures - Damp heat (steady state) tests
FD X15-111:2004 Mesure de l'humidité de l'air - Généralités sur les instruments de mesure - Guide de choix et d'utilisation
NF EN 60512-11-3:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 11-3 : essais climatiques - Essais 11c : essai continu de chaleur humide
NF EN 60068-2-67/A1:2019 Essais d'environnement Partie 2-67 : essais - Essai Cy : essai continu de chaleur humide, essai accéléré applicable en premier lieu aux composants
NF X15-111:1993 Measurement of air moisture. General information on measuring instruments. Selection guide.
NF EN IEC 61300-2-46:2019 Dispositifs d'interconnexion et composants passifs à fibrzes optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-46 : essais - Chaleur humide, essai cyclique

HU-MSZT, Humidity measurement

Standard Association of Australia （SAA）, Humidity measurement

AS 1099.2.28:1994 Basic environmental testing procedures for electrotechnology Part 2.28: Tests - guidance for damp heat tests
IEC 60068-2-67:1995+AMD1:2019 CSV Environmental testing — Part 2-67: Tests — Test Cy: Damp heat, steady state, accelerated test primarily intended for components
AS 60068.2.78:2023 Environmental testing, Part 2.78: Tests — Test Cab: Damp heat, steady state (IEC 60068-2-78:2012 (ED. 2.0) MOD)
IEC 60068-2-78:2012 RLV Environmental testing — Part 2-78: Tests — Test Cab: Damp heat, steady state
IEC 60068-2-67:1995/AMD1:2019 Amendment 1 — Environmental testing — Part 2-67: Tests — Test Cy: Damp heat, steady state, accelerated test primarily intended for components
AS 4459.10:1999 Methods of sampling and testing ceramic tiles - Determination of moisture expansion
AS/NZS 1301.419s:2004 Methods of test for pulp and paper - Water vapour transmission rate of paper

VE-FONDONORMA, Humidity measurement

AT-ON, Humidity measurement

ONORM S 7031-1989 Testing of leather; determination of the water vapour permeability; Herfeld's method Essai du cuir; determination de la permeabilite ? la vapeur d'eau; methode de Herfeld
ONORM M 9490 Teil.5-1987 Meteorological measurements for air pollution control; measurement of air humidity

AENOR, Humidity measurement

UNE 34078:1974 TEST METHODS FOR CHOCOLATES. HUMIDITY DETERMINATION.
UNE-EN 60068-2-67:1997 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST CY: DAMP HEAT, STEADY STATE, ACCELERATED TEST PRIMARILY INTENDED FOR COMPONENTS.
UNE 34552-2:1972 TEST METHODS OF MEAT AND MEAT PRODUCTS. HUMIDITY DETERMINATION.
UNE-EN 60793-1-50:2015 Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests
UNE-EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state

CZ-CSN, Humidity measurement

CSN 66 8102 Cast.6-1997
CSN 66 8102 Cast.6-1978 Smokeless powders. Methods of testing. Determination of hygroscopicity

YU-JUS, Humidity measurement

JUS H.F8.202-1986 Gases.Determination of the moisture by measurement dew-point
JUS U.B1.012-1979 Testing of soils. Determination of soil moisture content
JUS N.A5.900-1984 Basic environmental testing procedures. TestZ/AD: Composite temperature/humidity cyclic test
JUS N.A5.720-1980 Basic environmental testing procedures. Test Da: Accekrated damp heat

American Society for Testing and Materials (ASTM), Humidity measurement

ASTM D4230-02e1 Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D4230-02(2007) Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM D4230-02(2012) Standard Test Method of Measuring Humidity with Cooled-Surface Condensation (Dew-Point) Hygrometer
ASTM F1397-93(2005) Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components
ASTM E337-15 Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)
ASTM E398-13 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement

Japanese Industrial Standards Committee (JISC), Humidity measurement

JIS C 61300-2-46:2011 Fiber optic interconnecting devices and passive components -- Basic test and measurement procedures -- Part 2-46: Tests -- Damp heat, cyclic

PL-PKN, Humidity measurement

PN P04747-1991 Textile fabrics. Determination of resistance to surface wetting (Spray test)
PN C04833-03-1986 Household chemistry products Rinsing agents Methods of testDetermination of re-wetting power
PN Z04002 Arkusz 06-1974 Air purity protection Tests of dust physical properties Determination of wetting angle of dus

German Institute for Standardization, Humidity measurement

DIN EN ISO 12687:1998-09 Metallic coatings - Porosity tests - Humid sulfur (flowers of sulfur) test (ISO 12687:1996); German version EN ISO 12687:1998
DIN 53118:2013 Testing of paper and board - Determination of equilibrium moisture content
DIN EN 60068-2-30:2006-06 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30:2005); German version EN 60068-2-30:2005 / Note: DIN EN 60068-2-30 (2000-02) remains valid alongside this standard until 2008-11-01.

Lithuanian Standards Office , Humidity measurement

LST EN 60068-2-67-2001 Environmental testing. Part 2: Tests. Test Cy: Damp heat, steady state, accelerated test primarily intended for components (IEC 60068-2-67:1995)
LST EN 60068-2-30-2006 Environmental testing -- Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

IT-UNI, Humidity measurement

UNI 7341-1974

Society of Automotive Engineers (SAE), Humidity measurement

SAE TS346-1-1987 TS346 Test for Electrical Connectors Damp Heat - Cyclic Test
SAE J1326-1985 Test Method for Measuring Wet Color Transfer Characteristics

European Committee for Electrotechnical Standardization（CENELEC）, Humidity measurement

EN 60793-1-50:2015 Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests
EN IEC 60068-2-38:2021 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test

British Standards Institution (BSI), Humidity measurement

BS EN 60068-2-66:1995 Environmental testing. Test methods. Test Cx. Damp heat, steady state (unsaturated pressurized vapour)
BS EN IEC 61300-2-46:2019 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures - Tests. Damp heat, cyclic
BS EN ISO 15106-1:2005 Plastics - Film and sheeting - Determination of water vapour transmission rate - Humidity detection sensor method
BS EN 60068-2-69:2017+A1:2019 Environmental testing - Tests. Test Te/Tc. Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method
BS EN 451-2:2017 Tracked Changes. Method of testing fly ash. Determination of fineness by wet sieving
BS EN 60793-1-50:2015 Tracked Changes. Optical fibres. Measurement methods. Damp heat (steady state) tests
BS EN IEC 60068-2-38:2021 Tracked Changes. Environmental testing. Tests. Test Z/AD: Composite temperature/humidity cyclic test
BS 3900-F15:1995 Methods of test for paints. Determination of resistance to humidity (intermittent condensation)

CU-NC, Humidity measurement

NC 40-145-1988 Textile Industry. Determination of the Hygroscopic Properties of Textile Fabrics. Testing Methods

Korean Agency for Technology and Standards (KATS), Humidity measurement

KS C 0222-2013 Basic environmental testing procedures part 2:tests, test ca:damp heat, steady state
KS B ISO TR 9209:2003 Measurement of liquid flow in open channels-Determination of the wetline correction
KS B ISO TR 9209:2015 Measurement of liquid flow in open channels－Determination of the wetline correction
KS B ISO TR 9209-2003(2013) Measurement of liquid flow in open channels－Determination of the wetline correction
KS C IEC 60068-2-38-2014(2019) Environmental testing — Part 2-38: Tests — Test Z/AD: Composite temperature/humidity cyclic test

SAE - SAE International, Humidity measurement

SAE J1326-1980 Test Method for Measuring Wet Color Transfer Characteristics
SAE J1326-2019 Test Method for Measuring Wet Color Transfer Characteristics

国家文物局, Humidity measurement

WW/T 0104-2020 Preservation environment monitoring of cultural relics Monitoring terminal temperature and humidity

Canadian General Standards Board （CGSB), Humidity measurement

CGSB 1-GP-71 METH 113.6-1979 Methods of Testing Paints and Pigments Corrosion Humidity Cabinet Test, One Coat of Material Applied to Steel Panels
CGSB 1-GP-71 METH 113.8-1979 Methods of Testing Paints and Pigments Corrosion Humidity Cabinet Test, Two Coats of Material Applied to Steel Panels

Danish Standards Foundation, Humidity measurement

DS/EN 60068-2-38:2010 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test
DS/EN 60068-2-78:2002 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
DS/EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
DS/EN 60068-2-30:2006 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

ES-UNE, Humidity measurement

UNE-EN IEC 60068-2-38:2021 Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test (Endorsed by Asociación Española de Normalización in June of 2021.)
UNE-EN 60068-2-67:1996/A1:2019 Environmental testing - Part 2-67: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components (Endorsed by Asociación Española de Normalización in October of 2019.)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Humidity measurement

JEDEC JESD22-A110-B-1999 Test Method A110-B Highly-Accelerated Temperature and Humidity Stress Test (HAST)

European Committee for Standardization (CEN), Humidity measurement

EN 828:2013 Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface