ZH
RU
ES
wet state
wet state, Total:98 items.
In the international standard classification, wet state involves: Raw materials for rubber and plastics, Leather technology, Paper and board, Pulps, Farming and forestry, Construction materials, Footwear, Reinforced plastics, Products of the textile industry, Environmental protection, Fishing and fish breeding, Wood-based panels, Medical equipment, Environmental testing, Electrical accessories, Chipless working equipment, Electrical engineering in general, Paper products, Semiconductor devices, Electrical and electronic testing, Fibre optic communications, Semiconducting materials.
International Organization for Standardization (ISO), wet state
- ISO 9026:1991 Raw rubber of unvulcanized compounds; determination of green strength
- ISO 18782:2015 Textiles - Determination of dynamic hygroscopic heat generation
ZA-SANS, wet state
- SANS 5634:1972 Determination of wet compressibility of leather and fibreboards
- SANS 5641:1972 Determination of wet and dry bursting strengths of stiffeners
- SANS 5633:1968 Determination of wet stitch tear strength (leather, leatherboard, fibreboard)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, wet state
- GB/T 8330-2008(英文版) Determination of specific gravity of ion exchange resins in wet state
- GB/T 8331-2008(英文版) Determination of bulk density of ion exchange resins in wet state
- GB/T 43117-2023 Determination of ring creep properties of glass fiber reinforced thermoset plastic (GRP) pipes under wet or dry conditions
- GB/T 27647-2011 Technical standards for wetland ecological risk-benefit assessment
- GB/T 32378-2015 Determination of long-term ultimate bending strain and long-term ultimate relative ring deformation of glass fiber reinforced thermosetting plastic (GRP) pipes in a wet environment
- GB/T 4897.5-2003 Particleboard--Part 5:Requirements for board-bearing boards for use in humid condisions
- GB/T 4897.7-2003 Particleboard--Part 7:Requirements for heavy-duty load-bearing boards for use in humid condisions
RU-GOST R, wet state
- GOST 10656-1963 Sole leather. Method for the determination of abrasive resistance in wet state
- GOST 26893-1986 Filter paper for qualitative and quantitative analyses. Method for the determination of wet bursting strength
- GOST 29234.4-1991 Moulding sands. Method for determination of compressive strength in damp state
Japanese Industrial Standards Committee (JISC), wet state
- JIS P 8135:1976 Testing method of wet tensile breaking strength of paper and paperboard
- JIS C 5023:1978 Damp heat (steady state) testing procedures for electronic componets
- JIS C 60068-2-78:2004 Environmental testing -- Part 2-78: Tests -- Test Cab: Damp heat, steady state
- JIS C 60068-2-78:2015 Environmental testing -- Part 2-78: Tests -- Test Cab: Damp heat, steady state
Professional Standard - Agriculture, wet state
- ZB X 10046-1986 Wet Salted Production Process General Regulations for Sour Bamboo Shoots
- ZB X 10045-1986 General regulations for the production process of wet salted vegetables Pickled potherb mustard
- LY/T 2794-2023 Mangrove Wetland Ecosystem Monitoring and Evaluation Specifications
KR-KS, wet state
Group Standards of the People's Republic of China, wet state
- T/JGE 0052-2023 Jiangxi Green Ecology-Wetland ecology fish
- T/CNTAC 123-2022 Test method for wet and dry yarn-on-yarn abrasion resistance
- T/SDSF 023-2023 Code of technical guidelines for ecological rehabilitation of general wetlands
- T/IAWBS 009-2019 High Voltage Bias Steady-state Temperature Humidity Test for Power Semiconductor Devices
Professional Standard - Machinery, wet state
- JB/T 13082-2017 Wet inorganic binder coated sand for nonferrous metal foundry
British Standards Institution (BSI), wet state
- BS EN ISO 5263-2:2007 Pulps - Laboratory wet disintegration - Disintegration of mechanical pulps at 20 °C
- BS EN ISO 5263-2:2004 Pulps - Laboratory wet disintegration - Disintegration of mechanical pulps at 20 °C
- BS 903-A62:1993 Physical testing of rubber - Method for determination of green strength of raw rubber of unvulcanized compounds
- PD IEC TR 63141:2020 Damp heat, steady state (unsaturated pressurized vapour with air)
- BS EN ISO 19403-6:2020 Paints and varnishes. Wettability - Measurement of dynamic contact angle
- BS EN 60793-1-50:2015 Tracked Changes. Optical fibres. Measurement methods. Damp heat (steady state) tests
- ISO 18782:2023 Textiles. Determination of dynamic hygroscopic heat generation
- BS EN 60793-1-50:2002 Optical fibres. Measurement methods and test procedures. Damp heat (steady state)
(U.S.) Ford Automotive Standards, wet state
Association Francaise de Normalisation, wet state
IN-BIS, wet state
NL-NEN, wet state
Heilongjiang Provincial Standard of the People's Republic of China, wet state
European Committee for Standardization (CEN), wet state
- EN ISO 5263-2:2004 Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 degrees C
Jilin Provincial Standard of the People's Republic of China, wet state
Yunnan Provincial Standard of the People's Republic of China, wet state
Beijing Provincial Standard of the People's Republic of China, wet state
Hebei Provincial Standard of the People's Republic of China, wet state
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., wet state
CZ-CSN, wet state
Professional Standard - Ocean, wet state
- HY/T 080-2005 Technical specification for coastal wetland eco-monitoring
Anhui Provincial Standard of the People's Republic of China, wet state
- DB34/T 3420-2019 Technical specification for wetland ecological status assessment
- DB34/T 3544-2019 Technical specification for evaluation of wetland ecological carrying capacity
- DB34/T 3422-2019 Provincial important wetland and general wetland ecological monitoring technical regulations
国家林业局, wet state
- LY/T 2899-2017 Wetland ecosystem service assessment specifications
- LY/T 2898-2017 Technical specifications for positioning and observing wetland ecosystems
- LY/T 2901-2017 Technical specifications for positioning and observation of lake and wetland ecosystems
- LY/T 2900-2017 Construction regulations of wetland ecosystem positioning observation and research station
Professional Standard - Medicine, wet state
- YY/T 0506.6-2009 Surgical drapes,gowns and clean air suits,used as medical devices,for patients,clinical staff and equipment.Part 6:Test method to determine the resistance to wet bacterial penetration
RO-ASRO, wet state
- STAS 8393/4-1981 Environmental testing procedures DAMP HEAT STEADY STATE Test Ca
Standard Association of Australia （SAA）, wet state
Hainan Provincial Standard of the People's Republic of China, wet state
- DB46/T 573-2022 Technical regulations for ecological restoration of mangrove wetlands
United States Navy, wet state
Korean Agency for Technology and Standards (KATS), wet state
Professional Standard - Forestry, wet state
- LY/T 2090-2013 Indicators system for long-term observation of wetland ecosystem
- LY/T 1707-2007 Indicators for long-term observation of wetland ecosystem
- LY/T 1708-2007 Construction standard for long-term observation of wetland ecosystem
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, wet state
Hubei Provincial Standard of the People's Republic of China, wet state
- DB42/T 1731-2021 Ecological Health Evaluation Specifications for Important Wetlands in Hubei Province
International Electrotechnical Commission (IEC), wet state
Taiwan Provincial Standard of the People's Republic of China, wet state
- CNS 3623-1995 Basic Environmental Testing Procedures Part 2:Tests,Test Ca:Damp Heat,Steady State
VN-TCVN, wet state
Jiangxi Provincial Standard of the People's Republic of China, wet state
- DB36/T 1328-2020 Technical guidelines for identification and assessment of wetland ecological environment damage
Xinjiang Provincial Standard of the People's Republic of China, wet state
- DB65/T 4027-2017 Specifications for assessment of wetland ecosystem service functions in Xinjiang
Sichuan Provincial Standard of the People's Republic of China, wet state
- DB5115/T 34-2020 Technical specifications for the treatment of brewery wastewater in artificial ecological wetlands
ECIA - Electronic Components Industry Association, wet state
- 186-1E-1978 Passive Electronic Component Parts@ Test Methods for; Method 1: Humidity (Steady State)
Liaoning Provincial Standard of the People's Republic of China, wet state
- DB21/T 2686-2016 Service function evaluation of coastal wetland ecosystem in Liaoning province
AENOR, wet state
Military Standard of the People's Republic of China-General Armament Department, wet state
- GJB 360.3-1987 Test methods for electronic and electrical components Steady state damp heat test