ZH
RU
ES

wiring harness

wiring harness, Total:473 items.

In the international standard classification, wiring harness involves: Agricultural machines, implements and equipment, Kitchen equipment, Road vehicle systems, Electrical wires and cables, Medical equipment, Installations in buildings, Colour coding, Vocabularies, Aerospace electric equipment and systems, Cycles, Aerospace fluid systems and components, Rotating machinery, Bridge construction, (No title), Fasteners, Commercial vehicles, Rectifiers. Convertors. Stabilized power supply, Fibre optic communications, Lifting equipment, Conducting materials, Electromechanical components for electronic and telecommunications equipment, Electrical accessories, Power transmission and distribution networks, Adhesives, Welding, brazing and soldering, Motor cycles and mopeds, Protective equipment, Small craft, Passenger cars. Caravans and light trailers, Internal combustion engines, Photography, Textile machinery, Products of the textile industry, Non-destructive testing, Nuclear energy engineering, Rubber and plastics products, Testing of metals, Water quality, Radiation measurements, Protection against fire, Glass, Radiocommunications, Radiation protection.


GM Holden Ltd, wiring harness

AENOR, wiring harness

  • UNE 40194:1974 FRAMES FOR HARNESS: COORDINATION OF DIMENSIONS IN FUNCTION OF SEPARATION BETWEEN HARNESS.
  • UNE 21371:1985 TEST METHOD FOR THE EVALUATION OF BORD STRENGTH OF IMPREGNATING VARNISHES BY THE WIRE BUNDLE TEST.
  • UNE 40196:1974 STRIPS AND PENS OF WOOD, METAL OR OTHER MATERIAL USEABLE FOR LITTLE MACHINES OF HARNESS.
  • UNE 40197:1974 PUNCHED TAPES TO PROGRAM THE MOVEMENT OF HARNESSES OR THE SELECTION OF WOOL IN SPINNINGS AND WEAVING MACHINES.

ZA-SANS, wiring harness

  • SANS 1418-2:2007 Aerial bundled conductor systems Part 2: Assembled insulated conductor bundles
  • SANS 1418-1:2007 Aerial bundled conductor systems Part 1: Cores
  • NRS 020-2002 Electricity distribution - Cable ties for use with low voltage aerial bundled conductors
  • PIESA 1020-2004 Electricity distribution - Cable ties for use with low-voltage aerial bundled conductors
  • SANS 1418-2:2009 Aerial bundled conductor systems Part 2: Assembled insulated conductor bundles
  • SANS 6101:2007 Adherence of dielectric to conductor of supporting cores of aerial bundled conductors
  • SANS 6100:2007 Aerial bundled conductors - Performance of supporting cores under mechanical and thermal stresses
  • SANS 12721:2004 Non-destructive testing - Thermal neutron radiographic testing - Determination of beam L/D ratio
  • NRS 051-1999 Suspension and strain fittings for insulated neutral supporting conductors used in medium-voltage aerial bundled conductor systems
  • PIESA 1018-2-2004 Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 2: Strain and suspension fittings for insulated neutral supporting conductors
  • PIESA 1018-5-2004 Fittings and connectors for low voltage overhead power lines using aerial bundled conductors Part 5: Current-carrying connectors and joints
  • NRS 018-5-1996 Fittings and connectors for low-voltage overhead power lines using aerial bundled conductors Part 5: Current-carrying connectors and joints

Professional Standard - Machinery, wiring harness

GM Europe, wiring harness

  • GME15337-2009 Wiring Harness Requirements English
  • GME 15337-2009 Wiring Harness Requirements (English)
  • GME15338-2008 Kabelsatz Dokumentation Wiring Harness Documentation English/German
  • GME15490-2007 Smooth Hoses (Used for Wiring-Harnesses) English; Includes Appendix A - C
  • GME 15490-2007 Smooth Hoses (Used for Wiring-Harnesses) (English; Includes Appendix A - C)
  • GME 15338-2008 Wiring Harness Documentation (English/German)
  • GME 15339-2009 Wiring Harness Work Instruction (English)
  • GME TM 592000-2001 Klebeb鋘der f黵 Kabels鋞ze Adhesive Tapes for Wiring Harness English/German
  • GME 14020-2008 Convoluted Conduit for Wiring Harness (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW15926.)
  • GME15339-2009 Wiring Harness Work Instruction English

BELST, wiring harness

工业和信息化部, wiring harness

  • QB/T 5662-2021 Household appliance wiring harness
  • QC/T 417-2021 Electrical wiring harness assemblies for motorcycles and mopeds
  • QC/T 1067.2-2017 Connectors for automotive wiring harnesses and electrical equipment Part 2: Types and dimensions of plug terminals
  • QC/T 1067.3-2017 Connectors for automotive wiring harnesses and electrical equipment Part 3: Types, dimensions and special requirements for wire connectors

Group Standards of the People's Republic of China, wiring harness

  • T/QGCML 1484-2023 Automotive low voltage wiring harness
  • T/QGCML 1016-2023 Wiring harness high strength connecting wire
  • T/CEA 041.2-2020 Elevator wiring harness technical requirements --Part2: cabinet wiring harness technical requirements
  • T/CEA 041.4-2020 Elevator wiring harness technical requirements --Part 4: Technical requirements for fixing installation harness with branches
  • T/JXTX 0007-2023 Pure copper wire for automobile power harness
  • T/CEA 041.5-2020 Elevator wiring harness technical requirements --Part5：Technical requirements for travelling cable harness
  • T/SHDSGY 152-2023 Technical specifications for automotive wiring harnesses
  • T/ZS 0319-2022 New energy electric vehicle wiring harness
  • T/ZZB 1084-2019 A puncture - connected automobile lamp wiring harness
  • T/CAS 699-2023 Photovoltaic wiring harness for PV systems
  • T/SXS 036-2023 New energy harness production process
  • T/CEA 041.3-2020 Elevator wiring harness technical requirements --Part 3: Technical requirements for fixing installation harness without branches
  • T/CEA 041.6-2020 Technical requirements for elevator wiring harness -- Part 6: Technical requirements for escalator and moving walk harness
  • T/ZZB 1234-2019 Battery terminal of automobile wire harness
  • T/ZJVITIA 15-2022 Technical Specifications for Automobile Low-Voltage Wire Harnesses
  • T/KCH 010-2021 Technical requirements for wire harness tension of construction machinery
  • T/XYMES 002-2019 Technical specifications of high duty cables for electric vehicles
  • T/KCH 004-2022 Technical requirements for wire harness jet coding
  • T/CEEIA 541-2021 Technical specification for cable harness of wind turbine generator system
  • T/WHAS 053-2023 Code for design of high voltage wiring harness for electric vehicles
  • T/CZII 005-2023 Technical conditions for aluminum core wire harness of passenger car battery
  • T/CASME 682-2023 New energy vehicle power harness technical requirements
  • T/CASME 563-2023 Wire harness arrangement snap-in device for car seats
  • T/KCH 003-2022 Technical requirements for cross section test of construction machinery harness
  • T/CPCIF 0061-2020 Polyvinyl chloride (PVC) electrical adhesive tapes for automotive wire harness
  • T/KCH 001-2022 Technical requirements for ultrasonic welding of construction machinery harness
  • T/CEA 041.1-2020 Elevator wiring harness technical requirements --Part1: General requirements
  • T/QGCML 2536-2023 Production process specifications for high-voltage wire harnesses for new energy vehicles
  • T/FSWCA 0014-2023 Assessment requirements for quality grading and forerunner — Automotive wiring harness
  • T/SGX 015-2022 Self-rolling protective sleeves for wiring harnesses Part 1: New energy vehicles

Japanese Industrial Standards Committee (JISC), wiring harness

U.S. Military Regulations and Norms, wiring harness

GM Global, wiring harness

  • GMW 16740-2012 Harness Tape Issue 1; English
  • GMW 3173-2013 ISO Cable Selection and Physical Harness Requirements for Vehicle Bus Data Transmission Issue 3; English

IN-BIS, wiring harness

Association Francaise de Normalisation, wiring harness

  • NF EN 4057-402:2015 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 402 : durée de vie
  • NF EN 4057-404:2007 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 404 : installation à basse température
  • NF EN 4057-303:2006 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 303 : tenue aux fluides
  • NF EN 4057-202:2006 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 202 : masses et dimensions
  • NF EN 4057-304:2007 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 304 : résistance à la rupture de la boucle à la température maximale d'utilisation
  • NF EN 4057-306:2007 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 306 : vieillissement en température
  • NF EN 4057-302:2007 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 302 : tenue à la flamme
  • NF EN 4057-307:2007 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 307 : résistance aux radiations des ultraviolet
  • NF EN 4056-001:2015 Série aérospatiale - Frettes de câblage pour harnais - Partie 001 : spécification technique
  • NF EN 4057-201:2006 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 201 : examen visuel
  • NF EN 4057-100:2007 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 100 : généralités
  • NF EN 4056-002:2014 Série aérospatiale - Frettes de câblage pour harnais - Partie 002 : liste des normes de produit
  • NF EN 4057-301:2006 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 301 : brouillard salin
  • NF L52-252-305*NF EN 4057-305:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 305 : colour fastness.
  • NF EN 4057-405:2006 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 405 : distance de sécurité de compas
  • NF EN 4057-401:2007 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 401 : résistance à la rupture de la boucle
  • NF EN 4057-407:2006 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 407 : vérification du réglage des outils de mise en oeuvre
  • NF L52-252-303*NF EN 4057-303:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 303 : resistance to fluids.
  • NF L52-252-201*NF EN 4057-201:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 201 : visual examination
  • NF EN 4057-305:2006 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 305 : résistance à la décoloration
  • NF L52-252-202*NF EN 4057-202:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 202 : examination of mass and dimensions.
  • NF EN 4057-406:2007 Série aérospatiale - Frettes de câblage pour harnais - Méthodes d'essais - Partie 406 : rétention du système de verrouillage
  • NF C74-203/A1:2005 Medical electrical equipment - Part 2-11 : particular requirements for the safety of gamma beam therapy equipment.
  • NF C31-030:1981 Wires for Electrical Machinery and Apparatus Acceptance and Rejection Conditions of a Batch of Winding Wires
  • NF EN ISO 13628-5:2013 Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 5 : faisceaux de câbles immergés
  • NF EN 3475-417:2009 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 417 : tenue au feu des câbles confinés dans un harnais
  • NF EN ISO 8092-3:1999 Véhicules routiers - Connexions pour faisceaux de câblage électrique embarqués - Partie 3 : languettes pour raccordements multipolaires - Dimensions et exigences particulières
  • NF EN ISO 8092-1:1998 Véhicules routiers - Connexions pour faisceaux de câblage électrique embarqués - Partie 1 : languettes pour raccordements unipolaires. Dimensions et exigences particulières
  • NF EN 4056-004:2015 Série aérospatiale - Frettes de câblage pour harnais - Partie 004 : frettes en plastique - Températures d'utilisation - 55 oC à 105 oC et - 55 oC à 150 oC - Norme de produit
  • NF EN ISO 8092-2:2006 Véhicules routiers - Connexions pour faisceaux de câblage électrique embarqués - Partie 2 : définitions, méthodes d'essai et exigences de performances générales
  • NF R13-440-2*NF EN ISO 8092-2:2006 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2 : definition, test methods and general performance requirements.
  • NF C48-211 F8:2000 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 12 : heat-resistant flexible cables (cords).
  • NF R13-442*NF EN ISO 8092-3:1999 Road vehicles - Connections for on-board electrical wiring harnesses - Part 3 : tabs for multi-pole connections - Dimensions and specific requirements
  • NF EN 4533-003:2017 Série aérospatiale - Systèmes des fibres optiques - Manuel d'utilisation - Partie 003 : règles de l'art pour la fabrication et l'installation des harnais

National Aeronautics and Space Administration (NASA), wiring harness

Taiwan Provincial Standard of the People's Republic of China, wiring harness

  • CNS 10159-1983 Colour Code for Wiring Harness for Automobiles
  • CNS 8579-1985 Glossary of Terms Relating to Electric Equipment for Automobiles(Wiring Harness)
  • CNS 10160-1983 Tolerance in Length for Wiring Harness for Automobiles
  • CNS 11822-1987 Wax Coated Nylon Band for Electric Wire and Cables

AIA/NAS - Aerospace Industries Association of America Inc., wiring harness

  • NAS436-1951 Clamp - Harness (Rev 2)
  • NAS899-1982 Wire Harness Assembly Machine@ Computerized Numerical Control
  • NAS899-2012 WIRE HARNESS ASSEMBLY MACHINE@ COMPUTERIZED NUMERICAL CONTROL (Rev 1)
  • NAS974-1975 Electrical Harness Assembling Machine@ Numerically Controlled (Rev 2)
  • NAS3426-2015 ELECTRICAL HARNESS – CABLE ASSEMBLIES@ PACKAGING OF (Rev 3)
  • NAS974-2012 ELECTRICAL HARNESS ASSEMBLING MACHINE@ NUMERICALLY CONTROLLED (Rev 3)
  • NAS437-1951 Clamp - Wire Bundle (Rev 2 (Includes Rev.1: 12/1949 - The Rev.2 only marks the change of status to Inactive For New Design))

(U.S.) Parachute Industry Association, wiring harness

British Standards Institution (BSI), wiring harness

  • BS G 258:1995 Glossary of terms for electrical cables and cable harnesses
  • BS ISO 8092-5:2021 Road vehicles. Connections for on-board electrical wiring harnesses. Test methods and general performance requirements for wiring harness connector operation
  • 19/30354993 DC BS ISO 8092-5. Road vehicles. Connections for on-board electrical wiring harnesses. Part 5. Test methods and general performance requirements for wiring harness connector operation
  • BS EN 4056-001:2015 Aerospace series. Cable ties for harnesses. Technical specification
  • BS EN 60601-2-11:1998 Medical electrical equipment - Particular requirements for the safety - Specification for gamma beam therapy equipment
  • BS EN ISO 8092-2:2005 Road vehicles. Connections for on-board electrical wiring harnesses. Definitions, test methods and general performance requirements
  • BS EN ISO 8092-2:2006 Road vehicles - Connections for on-board electrical wiring harnesses - Definitions, test methods and general performance requirements
  • BS EN ISO 8092-3:1999 Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for multi-pole connections - Dimensions and specific requirements
  • BS EN ISO 8092-1:1998 Road vehicles - Connections for on-board electrical wiring harnesses - Tabs for single-pole connections - Dimensions and specific requirements

Professional Standard - Automobile, wiring harness

  • QC/T 29106-2014 Technical specification of automobile wire harness
  • QC/T 29106-2004 Technical specification of low-voltage electric harness for motor vehicles
  • QC/T 417.3-2001 Automotive wiring harness connectors - Part 3 Dimensions and special requirements for single-wire blade connectors
  • QC/T 417.4-2001 Automotive wiring harness connectors - Part 4 Dimensions and special requirements for multi-wire blade connectors
  • QC/T 417.2-2001 Automotive wiring harness connectors Part 2 Test methods and general performance requirements (motorcycle part)
  • QC/T 417.1-2001 Automotive wiring harness connectors Part 1 Definitions, test methods and general performance requirements (automotive part)

Professional Standard - Light Industry, wiring harness

Society of Automotive Engineers (SAE), wiring harness

  • SAE AS4211C-2007 Fitting, Cross, Beam Seal
  • SAE AS2833-2-1947 AS2833 Distance Tube (for QL Harness)
  • SAE AS2829-4-1946 AS2829 Catch for Harness Release Gear
  • SAE AS2143-4-1950 AS2143-2144 Harness Attachment Plate, 25g Seat
  • SAE AS2830-5-1947 AS2830 25g Harness Release Gear (Locking In)
  • SAE AS2832-2-1947 AS2832 Link Plate (for Q and QK Harness)
  • SAE AS2819-4-1947 AS2819 Half Casing for Harness Release Gear
  • SAE USCAR44-2-2023 PERFORMANCE SPECIFICATION FOR AUTOMOTIVE WIRE HARNESS RETAINER CLIPS
  • SAE USCAR44-1-2021 PERFORMANCE SPECIFICATION FOR AUTOMOTIVE WIRE HARNESS RETAINER CLIPS
  • SAE AS2111-1-1946 AS2111 Attachment Lug for 'Z' Type Harness
  • SAE AS2820-4-1946 AS2820 Assembly of Front Casing (Harness Release Gear)
  • SAE AS2821-5-1947 AS2821 Assembly of Back Casing (Harness Release Gear)
  • SAE AS2264-4-1943 AS2264 Trunnion for Harness Release Gear
  • SAE AS24122-2009 WIRING HARNESS – EXTERNAL POWER, 115 VOLT AC, SINGLE PHASE
  • SAE AS60491A-2019 Sleeve, Protection, for Cable and Harness Protection
  • SAE AS24122A-2019 WIRING HARNESS - EXTERNAL POWER, 115 VOLT AC, SINGLE PHASE
  • SAE J2192-2010 Recommended Testing Methods for Physical Protection of Wiring Harnesses
  • SAE AS2815-1-2015 AS2815 Cable Spring for Harness Release Gear
  • SAE AS2817-4-1946 AS2817 Catch Spring for Harness Release Gear
  • SAE AS2814-4-1947 AS2814 Cable Spring for Harness Release Gear
  • SAE USCAR44-2021 PERFORMANCE SPECIFICATION FOR AUTOMOTIVE WIRE HARNESS RETAINER CLIPS (REVISION 1)
  • SAE AS4224B-2007 Fitting Assembly, Tee, Beam Seal, Retained Nut on Side
  • SAE AS62700-6-1998 AS62700-742 Clamp, Loopstyle (Grounding Strip) Cushion Reinforced (Electrical Harness)
  • SAE AIR5464-2008 Metal Clad Fibers for Electrical Shielding & Harness Overbraid
  • SAE AS5004B-2007 Fitting, Tee, Beam Seal Bulkhead on Side
  • SAE AS4232B-2007 Fitting, Elbow, 90°, External Thread, Beam Seal to Integral Weld Ring
  • SAE ARP5614-2014 Guidelines for Harness Critical Clamp Locator Marker Installation on Electrical Cable Assemblies
  • SAE ARP5614-2019 Guidelines for Harness Critical Clamp Locator Marker Installation on Electrical Cable Assemblies
  • SAE J1742-2022 Connections for High Voltage On-Board Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements
  • SAE AS4233B-2007 Fitting, Elbow, 90°, Bulkhead, External Thread, Beam Seal to Integral Weld Ring
  • SAE AS61935-4-1994 AS61935-969 Clamp, Loop Style, Cushion Reinforced (Electrical Harness). (For Use with 6mm or 0.250 Bolts)
  • SAE AS62600-5-1995 AS62600-634 Clamp, Loop Style, Cushion Reinforced (Electrical Harness). (for Use with 6mm or 0.250 Bolts)
  • SAE AS62500-5-1995 AS62500-534 Clamp, Loop Style, Cushion Reinforced (Electrical Harness). (for Use with 5mm or 0.190 Bolts)
  • SAE AS61900-4-1994 AS61900-934 Clamp, Loop Style, Cushion Reinforced (Electrical Harness). (For Use with 5mm or 0.190 Bolts)
  • SAE AS23190-A3-2008 Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support
  • SAE J1742-2010 Connections for High Voltage On-Board Road Vehicle Electrical Wiring Harnesses Test Methods and General Performance Requirements
  • SAE AS23190_A2-2006 Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support
  • SAE AS23190_A3-2008 Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support
  • SAE AS23190_A1-2005 Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support
  • SAE AS23190-2004 Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support
  • SAE J2223/2-2011 Connections for On-Board Road Vehicle Electrical Wiring Harnesses—Part 2: Tests and General Performance Requirements
  • SAE AS23190/4B-2016 MOUNTING HARDWARE, CUSHION CLAMP, METAL FOR CABLE HARNESS TYING AND SUPPORT, TYPE V, CLASS 1
  • SAE AS23190/4D-2019 MOUNTING HARDWARE, CUSHION CLAMP, METAL FOR CABLE HARNESS TYING AND SUPPORT, TYPE V, CLASS 1
  • SAE J2223/2-1994 Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 2: Tests and General Performance Requirements
  • SAE J2223/2-2005 Connections for On-Board Road Vehicle Electrical Wiring Harnesses--Part 2: Tests and General Performance Requirements
  • SAE J2223/2-1998 Connections for On-Board Road Vehicle Electrical Wiring Harnesses - Part 2: Tests and General Performance Requirements
  • SAE J2223/2-2003 Connections for On-Board Road Vehicle Electrical Wiring Harnesses Part 2: Tests and General Performance Requirements
  • SAE J1742-1998 Connections for High Voltage On-Board Road Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements
  • SAE AS62800-5-1995 AS62800-842 Clamp Loop Style (Grounding Strip) Cushion Reinforced (Electrical Harness). (for Use with 6mm or 0.250 Bolts)
  • SAE AS62200-5-1995 AS62200-234 Clamp, Loop Style (Snap Lock) Cushion Reinforced (Electrical Harness) (for 5,00mm and 0.1900 Inch Fasteners)
  • SAE AS62250-5-1995 AS62250-284 Clamp, Loop Style (Snap Lock) Cushion Reinforced (Electrical Harness) (for 6,00mm and 0.2500 Inch Fasteners)

Aerospace Industries Association, wiring harness

International Organization for Standardization (ISO), wiring harness

  • ISO/DIS 8815 Aircraft — Electrical cables and cable harnesses — Vocabulary
  • ISO 8092-5:2021 Road vehicles - Connections for on-board electrical wiring harnesses - Part 5: Test methods and general performance requirements for wiring harness connector operation
  • ISO/CD 24581 Road vehicles — General requirements and test methods of in-vehicle optical harnesses for up to 100Gbit/s communication
  • ISO/DIS 24581:2014 Road vehicles — General requirements and test methods of in-vehicle optical harnesses for up to 100Gbit/s communication
  • ISO/DIS 8092-2 Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements
  • ISO/FDIS 8092-2:2023 Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Terminology, test methods and general performance requirements
  • ISO 8092-2:2023 Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Terminology, test methods and general performance requirements
  • ISO 8092-2:2000 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements
  • ISO 8092-2:2005 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements
  • ISO 8092-3:1996 Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections; dimensions and specific requirements
  • ISO 8092-1:1996 Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections; dimensions and specific requirements

未注明发布机构, wiring harness

  • ISO 8815:1994/Amd 1:1998 Aircraft — Electrical cables and cable harnesses — Vocabulary
  • BS G 246:1991(2000) Specification for Cable ties for installation under controlled tension on aircraft electric cable harnesses

Professional Standard - Aviation, wiring harness

  • HB 6438-2005 Gerneral requirements for procedures for wire harness of aircraft
  • HB 6438-1990 General requirements for aircraft wire harness processing
  • HB 7756.14-2005 CATIA modeling requirements--Part 14:Electrical harness installation
  • HBm 66.12-1988 Specifications for wire harnesses for electrical equipment of miniature trucks
  • HB 7262.3-1995 Manufacture of wire harnesses and cables for electrical equipment of aviation products
  • HB 20123.5-2012 Digital mock-up inspection and demonstration.Part 5: Harness lying

DE-VDA, wiring harness

JSAE - Society of Automotive Engineers of Japan@ Inc., wiring harness

  • JASO D607-1999 Automotive Parts - Color Code for Wiring Harness
  • JASO D616-2011 Automotive Parts - Test methods and general performance requirements for wiring harness connectors
  • JASO D623-2010 Automotive parts - Test methods and general performance requirements for wiring harness connector operation

International Federation of Trucks and Engines, wiring harness

Defense Logistics Agency, wiring harness

Professional Standard - Traffic, wiring harness

  • JT/T 861-2013 Prestressing multi-strands product for bridges
  • JT/T 1031-2016 Technical specifications for bus wiring harness corrugated tube

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, wiring harness

SAE - SAE International, wiring harness

  • SAE USCAR44-2017 PERFORMANCE SPECIFICATION FOR AUTOMOTIVE WIRE HARNESS RETAINER CLIPS
  • SAE AS60491-2015 Sleeve@ Protection@ For Cable and Harness Protection
  • SAE J2192-2015 Recommended Testing Methods for Physical Protection of Wiring Harnesses
  • SAE J2192-2005 Recommended Testing Methods for Physical Protection of Wiring Harnesses
  • SAE J2192-2016 Recommended Testing Methods for Physical Protection of Wiring Harnesses
  • SAE J2192-2021 Recommended Testing Methods for Physical Protection of Wiring Harnesses
  • SAE ARP6881-2018 Guidelines for the Use and Installation of Bonded Cable Harness Supports
  • SAE AS4232A-2006 Fitting, Elbow, 90°, External Thread, Beam Seal to Integral Weld Ring
  • SAE J1742-2005 Connections for High Voltage On-Board Vehicle Electrical Wiring Harnesses - Test Methods and General Performance Requirements
  • SAE AS23190-A1-2005 Straps@ Clamps@ and Mounting Hardware@ Plastic and Metal for Cable Harness Tying and Support
  • SAE AS23190-A2-2006 Straps@ Clamps@ and Mounting Hardware@ Plastic and Metal for Cable Harness Tying and Support
  • SAE J2223-2-2005 Connections for On-Board Road Vehicle Electrical Wiring HarnessesPart 2: Tests and General Performance Requirements
  • SAE J2223-2-1998 Connections for On-Board Road Vehicle Electrical Wiring HarnessesPart 2: Tests and General Performance Requirements
  • SAE J2223-2-2011 Connections for On-Board Road Vehicle Electrical Wiring Harnesses-Part 2: Tests and General Performance Requirements

Korean Agency for Technology and Standards (KATS), wiring harness

  • KS W 0126-2014 Aircraft－Electrical cables and cable harnesses－Vocabulary
  • KS W 0126-1999(2009) Aircraft－Electrical cables and cable harnesses－Vocabulary
  • KS A 4732-2018 Variable X- ray beam limiting devices for diagnostic use
  • KS B ISO 14500-2005(2010) Textile machinery and accessories－Harnesses for Jacquard weaving machines－Vocabulary
  • KS B ISO 7506-2005(2010) Textile machinery and accessories－Numbering of harnesses for drawing－in on Jacquard machines
  • KS B 5261-2003(2018)
  • KS B 5530-2003(2018)
  • KS R 1114-2013 Road vehicles - Conneetions for on-board electrieal wiring harnesses - Definitions,test methods and general performance requirements
  • KS R 1114-1998(2008) Road vehicles - Conneetions for on-board electrieal wiring harnesses - Definitions,test methods and general performance requirements
  • KS R ISO 8092-1-2014(2019) Road vehicles — Connections for on-board electrical wiring harnesses — Part 1: Tabs for single-pole connections — Dimensions and specific requirements
  • KS R ISO 8092-3-2003(2018) Road vehicles－Connections for on－board electrical wiring harnesses－ Part 3：Tabs for multi－pole connections－Dimensions and specific requirements
  • KS R ISO 8092-2-2014(2019) Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements

German Institute for Standardization, wiring harness

  • DIN 72036:2021-11 Road vehicles - Automation of the wiring-harness production / Note: Date of issue 2021-10-22
  • DIN ISO 14500:2004-03 Textile machinery and accessories - Harnesses for Jacquard weaving machines - Vocabulary (ISO 14500:2003)
  • DIN EN 4056-001:2015-08 Aerospace series - Cable ties for harnesses - Part 001: Technical specification; German and English version EN 4056-001:2015
  • DIN EN 4056-002:2014-10 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards; German and English version EN 4056-002:2014
  • DIN EN 4057-100:2008-02 Aerospace series - Cable ties for harnesses - Test methods - Part 100: General; German and English version EN 4057-100:2006
  • DIN EN 4057-305:2007-04 Aerospace series - Cable ties for harnesses - Test methods - Part 305: Colour fastness; German and English version EN 4057-305:2005
  • DIN EN 4057-302:2008-02 Aerospace series - Cable ties for harnesses - Test methods - Part 302: Flammability; German and English version EN 4057-302:2006 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
  • DIN EN 4057-303:2007-04 Aerospace series - Cable ties for harnesses - Test methods - Part 303: Resistance to fluids; German and English version EN 4057-303:2005
  • DIN EN 4057-201:2007-04 Aerospace series - Cable ties for harnesses - Test methods - Part 201: Visual examination; German and English version EN 4057-201:2005 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
  • DIN EN 4057-301:2008-02 Aerospace series - Cable ties for harnesses - Test methods - Part 301: Salt mist test; German and English version EN 4057-301:2005 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
  • DIN EN 4057-402:2014-07 Aerospace series - Cable ties for harnesses - Test methods - Part 402: Life cycle; German and English version EN 4057-402:2014 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
  • DIN EN 4057-404:2008-02 Aerospace series - Cable ties for harnesses - Test methods - Part 404: Low temperature installation; German and English version EN 4057-404:2006 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
  • DIN EN 4057-307:2008-02 Aerospace series - Cable ties for harnesses - Test methods - Part 307: Resistance to ultra violet radiation; German and English version EN 4057-307:2006
  • DIN EN 4057-401:2008-02 Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile strength; German and English version EN 4057-401:2006 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
  • DIN EN 4057-306:2008-02 Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test; German and English version EN 4057-306:2006 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
  • DIN ISO 7884-4:1998 Glass - Viscosity and viscometric fixed points - Part 4: Determination of viscosity by beam bending (ISO 7884-4:1987)
  • DIN EN 4057-406:2008-09 Aerospace series - Cable ties for harnesses - Test methods - Part 406: Locking device retention; German and English version EN 4057-406:2006
  • DIN EN 4057-202:2007-04 Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions; German and English version EN 4057-202:2005 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
  • DIN EN 4057-405:2008-02 Aerospace series - Cable ties for harnesses - Test methods - Part 405: Compass safe distance; German and English version EN 4057-405:2005 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
  • DIN EN 4057-407:2008-02 Aerospace series - Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings; German and English version EN 4057-407:2005 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
  • DIN EN ISO 8092-3:1999-11 Road vehicle - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections, dimensions and specific requirements (ISO 8092-3:1996); German version EN ISO 8092-3:1999
  • DIN EN ISO 8092-1:1998-10 Road vehicles - Connections for on-board electrical wiring harnesses - Part 1: Tabs for single-pole connections - Dimensions and specific requirements (ISO 8092-1:1996); German version EN ISO 8092-1:1998
  • DIN ISO 7884-7:1998 Glass - Viscosity and viscometric fixed points - Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987)
  • DIN EN ISO 8092-2:2023-04 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO/DIS 8092-2:2022); English version prEN ISO 8092-2:2022 / Note: Date of issue 2023-03-10*Intended as repla...
  • DIN EN ISO 8092-3:1999 Road vehicle - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections, dimensions and specific requirements (ISO 8092-3:1996); German version EN ISO 8092-3:1999
  • DIN EN 4056-006:2014-10 Aerospace series - Cable ties for harnesses - Part 006: Peek cable ties - For operating temperatures -55 °C to 240 °C - Product standard; German and English version EN 4056-006:2014 / Note: Applies in conjunction with DIN EN 4056-001 (2008-02).
  • DIN EN ISO 8092-2:2006-10 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2005); German version EN ISO 8092-2:2005

HU-MSZT, wiring harness

Aerospace, Security and Defence Industries Association of Europe (ASD), wiring harness

  • ASD-STAN PREN 4057-401-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 401: Loop Tensile Strength (Edition P 1)
  • ASD-STAN PREN 4056-002-2012 Aerospace series Cable ties for harnesses Part 002: Index of product standards (Edition P 2)
  • ASD-STAN PREN 4057-302-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 302: Flammability (Edition P 1)
  • ASD-STAN PREN 4057-305-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 305: Colour Fastness (Edition P 1)
  • ASD-STAN PREN 4057-100-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 100: General (Edition P 1)
  • ASD-STAN PREN 4057-201-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 201: Visual Examination (Edition P 1)
  • ASD-STAN PREN 4057-301-2002 Aerospace Series Cable Ties for Harnesses Test Methods Part 301: Salt Mist Test (Edition P 1)
  • ASD-STAN PREN 4057-404-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 404: Low Temperature Installation (Edition P 1)
  • ASD-STAN PREN 4057-306-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 306: Heat Ageing Test (Edition P 1)
  • ASD-STAN PREN 4057-406-2002 Aerospace Series Cable Ties for Harnesses Test Methods Part 406: Locking Device Retention (Edition P 1)
  • ASD-STAN PREN 4056-003-2002 Aerospace Series Cable Ties for Harnesses Part 003: Plastic Cable Ties, Operating Temperatures - 65 Degrees C to 105 Degrees C and - 65 Degrees C to 150 Degrees C Product Standard (Edition P 1)
  • ASD-STAN PREN 4057-304-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 304: Loop Tensile Strength at Maximum Working Temperature (Edition P 1)
  • ASD-STAN PREN 4057-307-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 307: Resistance to Ultra Violet Radiation (Edition P 1)
  • ASD-STAN PREN 4057-303-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 303: Resistance to Fluids (Edition P 1)
  • ASD-STAN PREN 4057-405-2002 Aerospace Series Cable Ties for Harnesses Test Methods Part 405: Compass Safe Distances (Edition P 1)
  • ASD-STAN PREN 4057-202-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 202: Examination of Mass and Dimensions (Edition P 1)
  • ASD-STAN PREN 4057-407-2002 Aerospace Series Cable Ties for Harnesses Test Methods Part 407: Verification of Application Tool Settings (Edition P 1)
  • ASD-STAN PREN 4056-005-2002 Aerospace Series Cable Ties for Harnesses Part 005: Plastic Cable Ties, with Metallic Locking Devices, Operating Temperatures - 65 Degrees C to 105 Degrees C and - 65 Degrees C to 150 Degrees C Product Standard (Edition P 1)
  • ASD-STAN PREN 4057-402-2012 Aerospace series Cable ties for harnesses Test methods Part 402: Life cycle (Edition P 2)

Underwriters Laboratories (UL), wiring harness

  • UL SUBJECT 9703-2011 Outline of Investigation for Distributed Generation Wiring Harnesses
  • UL SUBJECT 9703-2018 UL Outline for Investigation for Distributed Generation Wiring Harnesses (Issue 2)
  • UL 9703 BULLETIN-2012 UL Standard For Safety Outline of Investigation for Distributed Generation Wiring Harnesses
  • UL 9703 BULLETIN-2011 UL Standard for Safety OUTLINE OF INVESTIGATION FOR DISTRIBUTED GENERATION WIRING HARNESSES

Aerospace Industries Association/ANSI Aerospace Standards, wiring harness

US-ACEI, wiring harness

IPC - Association Connecting Electronics Industries, wiring harness

GB-REG, wiring harness

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, wiring harness

  • PREN 4056-001-2013 Aerospace series Cable ties for harnesses Part 001: Technical specification (Edition P 2)
  • PREN 4056-002-2012 Aerospace series Cable ties for harnesses Part 002: Index of product standards (Edition P 2)
  • PREN 4056-003-2018 Aerospace series Cable ties for harnesses Part 003: Plastic cable ties Operating temperatures – 65 °C to 105 °C and – 65 °C to 150 °C Product standard (Edition P 2)
  • PREN 4056-006-2012 Aerospace series Cable ties for harnesses Part 006: Peek cable ties For operating temperatures - 55 °C to 240 °C Product standard (Edition P 1)
  • PREN 4056-002-2000 Aerospace Series Cable Ties for Harnesses Part 002: Index of Product Standards (Edition 4)
  • PREN 4056-002-2002 Aerospace Series Cable Ties for Harnesses Part 002: Index of Product Standards (Edition P 1)
  • PREN 4056-001-2002 Aerospace Series Cable Ties for Harnesses Part 001: Technical Specification (Edition P 1)
  • PREN 4057-100-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 100: General (Edition P 1)
  • PREN 4057-305-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 305: Colour Fastness (Edition P 1)
  • PREN 4057-302-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 302: Flammability (Edition P 1)
  • PREN 4057-402-2012 Aerospace series Cable ties for harnesses Test methods Part 402: Life cycle (Edition P 2)
  • PREN 4057-307-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 307: Resistance to Ultra Violet Radiation (Edition P 1)
  • PREN 4057-201-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 201: Visual Examination (Edition P 1)
  • PREN 4057-402-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 402: Life Cycle (Edition P 1)
  • PREN 4057-404-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 404: Low Temperature Installation (Edition P 1)
  • PREN 4057-301-2002 Aerospace Series Cable Ties for Harnesses Test Methods Part 301: Salt Mist Test (Edition P 1)
  • PREN 4057-303-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 303: Resistance to Fluids (Edition P 1)

US-MSFC, wiring harness

RU-GOST R, wiring harness

  • GOST 33710-2015 Cranes. Selection of wire ropes, drums and sheaves
  • GOST 8.473-1982 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for measuring exposure dose, mean exposure rate, mean energy fluence and mean density of pulsed X-ray radiation fluence energy

National Metrological Technical Specifications of the People's Republic of China, wiring harness

  • JJF 2017-2022 (20~150) kV X-ray beam half value layer instrument calibration specification

Danish Standards Foundation, wiring harness

  • DS/ISO 8092-5:2021 Road vehicles – Connections for on-board electrical wiring harnesses – Part 5: Test methods and general performance requirements for wiring harness connector operation
  • DS/EN 4056-001:2006 Aerospace series – Cable ties for harnesses – Part 001: Technical specification
  • DS/EN 4057-100:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 100: General
  • DS/EN 4057-305:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 305: Colour fastness
  • DS/EN 4057-302:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 302: Flammability
  • DS/EN 4057-303:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 303: Resistance to fluids
  • DS/EN 4057-402:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 402: Life cycle
  • DS/EN 4057-404:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 404: Low temperature installation
  • DS/EN 4057-201:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 201: Visual examination
  • DS/EN 4057-301:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 301: Salt mist test
  • DS/EN 4057-307:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 307: Resistance to ultra violet radiation
  • DS/EN 4057-306:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test
  • DS/EN ISO 8092-1:1999 Road vehicles - Connections for on-board electrical wiring harnesses - Del 1: Tabs for single-pole connections - Dimensions and specific requirements
  • DS/EN 4057-401:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile strength
  • DS/EN 4057-405:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 405: Compass safe distance
  • DS/EN 4057-406:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 406: Locking device retention
  • DS/EN 4057-202:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions
  • DS/EN ISO 8092-3:2000 Road vehicles - Connections for on-board electrical wiring harnesses - Part 3: Tabs for multi-pole connections - Dimensions and specific requirements
  • DS/EN ISO 8092-2:2006 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements
  • DS/EN 4057-407:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings

American Society for Testing and Materials (ASTM), wiring harness

  • ASTM B738-03 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
  • ASTM B738-98 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
  • ASTM B738-03(2008) Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
  • ASTM B738-13 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
  • ASTM E2003-98(2004) Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators
  • ASTM E2003-98e1 Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators
  • ASTM D5823-13 Standard Test Method for Tuft Height of Pile Floor Coverings
  • ASTM E2861-16(2020) Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams
  • ASTM D7601-10 Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation
  • ASTM B738-13(2018) Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
  • ASTM B172-01a Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
  • ASTM B172-95 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
  • ASTM B172-01 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
  • ASTM B172-01a(2007)e1 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
  • ASTM B172-10 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors

Institute of Interconnecting and Packaging Electronic Circuits (IPC), wiring harness

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, wiring harness

  • GB/T 11018.3-1989 Copper winding wires with silk covering--Bunched wires with silk covering

GM North America, wiring harness

PT-IPQ, wiring harness

  • NP EN 1095-2000 Deck safety harness and safety line for use on recrestional craft Safety requirements and test mathods
  • NP 3210-1988 Textiles Carpets. Determination of number of tufts or loopsn per unit lenght and per unit área

International Electrotechnical Commission (IEC), wiring harness

  • IEC 60699:1981 Test method of the evaluation of bond strength of impregnating varnishes by the wire bundle test
  • IEC TR2 60332-3:1992 Tests on electric cables under fire conditions; part 3: tests on bunched wires or cables

(U.S.) Kennedy Space Center, wiring harness

工业和信息化部/国家能源局, wiring harness

  • JB/T 13058-2017 Standard for reliability testing methods of wiring harnesses for reciprocating internal combustion engines

ES-UNE, wiring harness

  • UNE-EN 4056-001:2015 Aerospace series - Cable ties for harnesses - Part 001: Technical specification (Endorsed by AENOR in July of 2015.)
  • UNE-EN 4057-100:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 100: General (Endorsed by AENOR in April of 2007.)
  • UNE-EN 4056-002:2014 Aerospace series - Cable ties for harnesses - Part 002: Index of product standards (Endorsed by AENOR in September of 2014.)
  • UNE-EN 4057-305:2005 Aerospace series - Cable ties for harnesses - Test methods - Part 305: Colour fastness (Endorsed by AENOR in March of 2006.)
  • UNE-EN 4057-302:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 302: Flammability (Endorsed by AENOR in April of 2007.)
  • UNE-EN 4057-303:2005 Aerospace series - Cable ties for harnesses - Test methods - Part 303: Resistance to fluids (Endorsed by AENOR in March of 2006.)
  • UNE-EN 4057-402:2014 Aerospace series - Cable ties for harnesses - Test methods - Part 402: Life cycle (Endorsed by AENOR in June of 2014.)
  • UNE-EN 4057-201:2005 Aerospace series - Cable ties for harnesses - Test methods - Part 201: Visual examination (Endorsed by AENOR in March of 2006.)
  • UNE-EN 4057-404:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 404: Low temperature installation (Endorsed by AENOR in April of 2007.)
  • UNE-EN 4057-301:2005 Aerospace series - Cable ties for harnesses - Test methods - Part 301: Salt mist test (Endorsed by AENOR in March of 2006.)
  • UNE-EN 4057-307:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 307: Resistance to ultra violet radiation (Endorsed by AENOR in April of 2007.)
  • UNE-EN 4057-401:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile strength (Endorsed by AENOR in April of 2007.)
  • UNE-EN 4057-306:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test (Endorsed by AENOR in April of 2007.)
  • UNE-EN 4057-406:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 406: Locking device retention (Endorsed by AENOR in April of 2007.)
  • UNE-EN 4057-405:2005 Aerospace series - Cable ties for harnesses - Test methods - Part 405: Compass safe distance (Endorsed by AENOR in March of 2006.)
  • UNE-EN 4057-202:2005 Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions (Endorsed by AENOR in March of 2006.)
  • UNE-EN 4057-407:2005 Aerospace series - Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings (Endorsed by AENOR in March of 2006.)
  • UNE-EN 4056-006:2014 Aerospace series - Cable ties for harnesses - Part 006: Peek cable ties - For operating temperatures -55 °C to 240 °C - Product standard (Endorsed by AENOR in September of 2014.)

U.S. Air Force, wiring harness

Anhui Provincial Standard of the People's Republic of China, wiring harness

  • DB34/T 3114-2018 Design Criteria for Beamstoppers in Transport Lines of Superconducting Cyclotrons

国家市场监督管理总局、中国国家标准化管理委员会, wiring harness

  • GB/T 37133-2018 Technical specifications of high duty cables and connectors for electric vehicles

JP-JASO, wiring harness

  • JASO D616-2007 Automotive parts-Test methods and general performance requirements for wiring harness connectors

CZ-CSN, wiring harness

  • CSN ISO 366-1:1994 Textile machinery and accessories. Reeds. Part 1: Pitch bound reeds. Dimensions

American Society of Mechanical Engineers (ASME), wiring harness

  • ASME N-452-2001 Specialized Subcontracted Welding Process (Electron Beam Welding) Section III, Division 1

PL-PKN, wiring harness

  • PN P64074-1987 Textile machinery and accessories Numbering of harnesses for drawing- -in on Jacquard machines

Lithuanian Standards Office , wiring harness

  • LST EN 4056-001-2006 Aerospace series - Cable ties for harnesses - Part 001: Technical specification
  • LST EN 4057-100-2007 Aerospace series - Cable ties for harnesses - Test methods - Part 100: General
  • LST EN 4057-305-2006 Aerospace series - Cable ties for harnesses - Test methods - Part 305: Colour fastness
  • LST EN 4057-302-2007 Aerospace series - Cable ties for harnesses - Test methods - Part 302: Flammability
  • LST EN 4057-201-2006 Aerospace series - Cable ties for harnesses - Test methods - Part 201: Visual examination
  • LST EN 4057-404-2007 Aerospace series - Cable ties for harnesses - Test methods - Part 404: Low temperature installation
  • LST EN 4057-402-2007 Aerospace series - Cable ties for harnesses - Test methods - Part 402: Life cycle
  • LST EN 4057-303-2006 Aerospace series - Cable ties for harnesses - Test methods - Part 303: Resistance to fluids
  • LST EN 4057-301-2006 Aerospace series - Cable ties for harnesses - Test methods - Part 301: Salt mist test
  • LST EN 4057-307-2007 Aerospace series - Cable ties for harnesses - Test methods - Part 307: Resistance to ultra violet radiation
  • LST EN 4057-306-2007 Aerospace series - Cable ties for harnesses - Test methods - Part 306: Heat ageing test
  • LST EN 4057-406-2007 Aerospace series - Cable ties for harnesses - Test methods - Part 406: Locking device retention
  • LST EN 4057-405-2006 Aerospace series - Cable ties for harnesses - Test methods - Part 405: Compass safe distance
  • LST EN 4057-401-2007 Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile strength
  • LST EN 4057-202-2006 Aerospace series - Cable ties for harnesses - Test methods - Part 202: Examination of mass and dimensions
  • LST EN 4057-407-2006 Aerospace series - Cable ties for harnesses - Test methods - Part 407: Verification of application tool settings

European Committee for Standardization (CEN), wiring harness

  • prHD 405.3 S1-1992 Tests on electric cables under fire conditions; part 3: tests on bunched wires or cables (IEC 332-3:1992)
  • EN ISO 8092-2:1998 Road Vehicles - Connections for on-Board Electrical Wiring Harnesses - Part 2: Definitions, Test Methods and General Performance Requirements ISO 8092-2:1996; Supersedes EN 28092-2:1991
  • EN ISO 8092-2:2005 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements

International Telecommunication Union (ITU), wiring harness

  • ITU-R SF.765-1-2002 Intersection of radio-relay antenna beams with orbits used by space stations in the fixed-satellite service

United States Navy, wiring harness

  • NAVY QPL-AS23190-QPD-2010 Straps, Clamps, and Mounting Hardware, Plastic and Metal for Cable Harness Tying and Support
  • NAVY QPL-AS23190-QPD-2011 STRAPS, CLAMPS, AND MOUNTING HARDWARE, PLASTIC AND METAL FOR CABLE HARNESS TYING AND SUPPORT
  • NAVY QPL-AS23190-2011 STRAPS, CLAMPS, AND MOUNTING HARDWARE, PLASTIC AND METAL FOR CABLE HARNESS TYING AND SUPPORT
  • NAVY QPL-AS23190-2013 STRAPS, CLAMPS, AND MOUNTING HARDWARE, PLASTIC AND METAL FOR CABLE HARNESS TYING AND SUPPORT

KR-KS, wiring harness

  • KS R ISO 8092-3-2003(2023) Road vehicles－Connections for on－board electrical wiring harnesses－ Part 3：Tabs for multi－pole connections－Dimensions and specific requirements

CEN - European Committee for Standardization, wiring harness

  • EN ISO 8092-2:2001 Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions@ test methods and general performance requirements

  beam split, converging beam, bundle, bunching, strangle, beam expansion, loose beam, energy beam+, beam electron diffraction, molecular beam, k-line line, Electron beam line, wiring harness, High voltage wiring harness, Distributed wiring harness, Wire harness, Harness Connector, Wire Harness Tape, Wiring Harness Technical Standards, Electron beam current.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved