ZH
RU
ES

tap and touch

tap and touch, Total:412 items.

In the international standard classification, tap and touch involves: Hand-held tools, Switchgear and controlgear, Applications of information technology, Welding, brazing and soldering, Electrical accessories, Elements of buildings, Thermodynamics and temperature measurements, Electromechanical components for electronic and telecommunications equipment, Photography, Road vehicle systems, Commercial vehicles, Industrial automation systems, Rotating machinery, Tobacco, tobacco products and related equipment, Special purpose vehicles, Telecommunication terminal equipment, Linear and angular measurements, Aerospace electric equipment and systems, Kitchen equipment, Safety of machinery, Cinematography, On-board equipment and instruments, Protective equipment, Headgear. Clothing accessories. Fastening of clothing, Non-destructive testing, Data storage devices, Construction materials, Equipment for the rubber and plastics industries, Mechanical structures for electronic equipment, Valves, Shipbuilding and marine structures in general, Character sets and information coding, Components for aerospace construction, Fasteners for aerospace construction, Fruits. Vegetables, Electric road vehicles, Protection against crime, Road vehicles in general.

Defense Logistics Agency, tap and touch

• DLA A-A-55075-1992 GLOVES: MEN'S AND WOMEN'S, ANTI-CONTACT
• DLA MIL-DTL-28748/7 F-2009 CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE PIN CONTACTS, SIZE 22
• DLA MIL-DTL-28748/7 F (1)-2010 CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE PIN CONTACTS, SIZE 22
• DLA MIL-DTL-28748/7 F (2)-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE PIN CONTACTS, SIZE 22
• DLA MIL-DTL-38999 L SUPP 1-2008 CONNECTORS, ELECTRICAL CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR
• DLA MIL-DTL-38999 L-2008 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR
• DLA MIL-DTL-38999 L (1)-2009 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR
• DLA QPL-38999-QPD-2011 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR
• DLA MIL-DTL-38999 L SUPP 1A-2012 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR
• DLA MIL-DTL-38999 L (2)-2012 CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET, THREADED, AND BREECH COUPLING), ENVIRONMENT RESISTANT, REMOVABLE CRIMP AND HERMETIC SOLDER CONTACTS, GENERAL SPECIFICATION FOR
• DLA MIL-DTL-28748/3 F-2004 CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, CRIMP TYPE REMOVABLE PIN CONTACTS, SIZES 16 AND 20
• DLA QPL-38999-2012 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, General Specification for
• DLA MIL-DTL-55302/90 F-2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, RIGHT ANGLE, HERMAPHRODITIC CONTACT (.100 INCH SPACING)
• DLA A-A-55530 VALID NOTICE 1-2002 CONNECTORS, TELECOMMUNICATION, POLARIZED SHELL, PLUG, MALE RACK AND PANEL, SOLDER CONTACT, SIDE ENTRY SHIELD, SCREWLOCK
• DLA A-A-55530-1996 CONNECTORS, TELECOMMUNICATION, POLARIZED SHELL, PLUG, MALE RACK AND PANEL, SOLDER CONTACT, SIDE ENTRY SHIELD, SCREWLOCK
• DLA MIL-DTL-24308/3 J-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, GENERAL PURPOSE, CLASS D AND G, SOLDER TYPE
• DLA MIL-DTL-24308/4 P-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, GENERAL PURPOSE, CLASS D AND G, CRIMP TYPE
• DLA MIL-DTL-24308/3 J (1)-2013 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, GENERAL PURPOSE, CLASS D AND G, SOLDER TYPE
• DLA MIL-DTL-24308/7 J-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, NONMAGNETIC, CLASSES M AND N, SOLDER TYPE
• DLA MIL-DTL-24308/8 P-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, NONMAGNETIC, CLASS M AND N, CRIMP TYPE
• DLA MIL-DTL-24308/7 J (1)-2011 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, NONMAGNETIC, CLASSES M AND N, SOLDER TYPE
• DLA MIL-DTL-24308/8 P (1)-2011 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, NONMAGNETIC, CLASS M AND N, CRIMP TYPE
• DLA MIL-DTL-24308/8 P (2)-2013 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, PIN CONTACTS, NONMAGNETIC, CLASS M AND N, CRIMP TYPE
• DLA DSCC-DWG-05004 REV B-2010 CONNECTOR, ELECTRICAL, PLUG, RADIO FREQUENCY, SERIES ZMA, PIN CONTACT, FOR .141 AND .086 SEMIRIGID CABLE
• DLA MIL-DTL-55302/122 B VALID NOTICE 1-2013 Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, 184 Contact Positions, for Printed Wiring Boards (.050 Inch Spacing)
• DLA MIL-DTL-55302/122 B (2)-2013 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 184 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.050 INCH SPACING)
• DLA MIL-DTL-28840/12 E-2009 CONNECTORS, ELECTRICAL, SCREW THREADS, HIGH DENSITY, HIGH SHOCK, SHIPBOARD, CRIMP CONTACTS RECEPTACLE, BOX MOUNTING, CLASSES D, DS, P, T, AND Z
• DLA MIL-DTL-55302/193 B VALID NOTICE 1-2013 Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, 122 and 152 Position, Printed Wiring Board (.075 Spacing)
• DLA MIL-DTL-55302/59 H (1)-2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 90, 100 AND 120 CONTACT POSITIONS FOR PRINTED WIRING BOARDS (.100 SPACING)
• DLA MIL-DTL-28840/10 D-2009 CONNECTORS, ELECTRICAL, CIRCULAR, SCREW THREADS, HIGH DENSITY, HIGH SHOCK, SHIPBOARD, CRIMP CONTACTS, RECEPTACLE, WALL MOUNTING, CLASSES D, DS, P, T, AND Z
• DLA MIL-DTL-55302/193 B-2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 122 AND 152 POSITION, PRINTED WIRING BOARD (.075 SPACING)
• DLA A-A-55530 A-2008 CONNECTORS, TELECOMMUNICATION, POLARIZED SHELL, PLUG, MALE RACK AND PANEL, SOLDER CONTACT, SIDE ENTRY SHIELD, SCREWLOCK
• DLA MIL-DTL-28748/18 (1)-2011 CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, PRINTED WIRING BOARD (PWB) MOUNT, STRAIGHT THROUGH, PIN CONTACTS, SIZE 22
• DLA MIL-DTL-28840/10 E-2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CRIMP CONTACTS, RECEPTACLE, WALL MOUNTING, CLASSES D, DS, P, T, TS, Z, AND ZS
• DLA MIL-DTL-55302/1 E (1)-2012 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR PRINTED WIRING BOARDS (.150 SPACING)
• DLA MIL-DTL-55302/1 E-2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR PRINTED WIRING BOARDS (.150 SPACING)
• DLA MIL-DTL-55302/191 B-2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 100 POSITIONS, PRINTED WIRING BOARD (.075 SPACING)
• DLA MIL-DTL-55302/131 D VALID NOTICE 1-2012 Connectors, Plug, Electrical, Printed Circuit Subassembly and Accessories: Right Angle, Pin Contacts, 64 or 96 Contact Position for Printed Wiring Boards (.100 Spacing)
• DLA MIL-DTL-83538/13 A-2008 CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, TEST PLUG, REMOVABLE CRIMP CONTACTS, PINS, FOR MIL-STD-1760 APPLICATIONS (METRIC)
• DLA MIL-DTL-83538/13 A VALID NOTICE 1-2013 Connectors and Accessories, Electrical, Circular, Umbilical, Test Plug, Removable Crimp Contacts, Pins, for MIL-STD-1760 Applications (Metric)
• DLA MIL-DTL-24308/28 E-2009 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, INSULATION DISPLACEMENT, PIN CONTACTS, NONENVIRONMENTAL, CLASS G
• DLA MIL-DTL-24308/28 E (1)-2013 CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, POLARIZED SHELL, RACK AND PANEL, INSULATION DISPLACEMENT, PIN CONTACTS, NONENVIRONMENTAL, CLASS G
• DLA MIL-DTL-55302/4 F (1)-2012 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
• DLA MIL-DTL-55302/4 F-2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
• DLA MIL-DTL-55302/5 F-2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
• DLA MIL-DTL-83538/1 D-2008 CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, RECEPTACLE, STORE ASSEMBLY, REMOVABLE CRIMP CONTACTS, SOCKETS, FOR MIL-STD-1760 APPLICATIONS (METRIC)
• DLA QPL-83538 NOTICE 1-2008 Connectors and Accessories, Electrical, Circular, Umbilical, Environment Resistant, Removable Crimp Contacts for MIL-STD-1760 Applications (METRIC), General Specification for
• DLA MIL-DTL-83538/1 D VALID NOTICE 1-2013 Connectors and Accessories, Electrical, Circular, Umbilical, Receptacle, Store Assembly, Removable Crimp Contacts, Sockets, for MIL STD-1760 Applications (Metric)
• DLA MIL-DTL-83723/73 F-2009 CONNECTOR, ELECTRIC, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, BAYONET COUPLING, CRIMP SOCKET CONTACT) (SERIES III, CLASSES A, G, M, R, T, W AND Z)
• DLA MIL-DTL-28840/20 H-2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CRIMP CONTACTS, RECEPTACLE, WALL MOUNTING ASSEMBLY, STRAIGHT, CLASSES DJ, DJS, PJ, TJ, TJS, ZJ, AND ZJS

Association Francaise de Normalisation, tap and touch

• NF B53-662*NF EN 14761+A1:2008 Wood flooring - Solid wood parquet - Vertical finger, wide finger and module brick
• NF EN 14930/IN1:2009 Matériels agricoles et forestiers et matériels de jardinage - Machines portables à la main et à conducteur à pied - Détermination du risque de contact avec les surfaces chaudes
• NF EN 14930+A1:2009 Matériels agricoles et forestiers et matériels de jardinage - Machines portables à la main et à conducteur à pied - Détermination du risque de contact avec les surfaces chaudes
• NF T57-153-2*NF ISO 1268-2:2002 Fibre-reinforced plastics - Methods of producing test plates - Part 2 : contact and spray-up moulding
• NF V37-012*NF ISO 2971:2013 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus
• NF C63-110:2010 Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters.
• NF C63-110/A1:2012 Low-voltage switchgear and controlgear - Part 4-1 : contactors and motor-starters - Electromechanical contactors and motor-starters
• NF L54-142-002:2013 Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 002: specification of performance and contact arrangements
• NF EN ISO 8536-14:2018 Matériel de perfusion à usage médical - Partie 14 : clamps et limiteurs de débit pour appareils de transfusion et de perfusion sans contact à fluide
• NF EN IEC 60335-2-110:2021 Appareils électrodomestiques et analogues - Sécurité - Partie 2-110 : exigences particulières pour les appareils à micro-ondes à usage commercial avec applicateurs par insertion ou par contact
• NF ISO 2971:2013 Cigarettes et bâtonnets-filtres - Détermination du diamètre nominal - Méthode utilisant un instrument de mesure optique sans contact
• NF C73-910-2-110*NF EN IEC 60335-2-110:2021 Household and similar electrical appliances - Safety - Part 2-110 : particular requirements for commercial microwave appliances with insertion or contacting applicators
• NF C93-424:1982 Electronic components. Connecting devices. Board mounted printed circuits connectors with contact and termination spacing of 1,27 mm. Type HE 8. General requirements.
• NF L54-002-214*NF EN 2591-214:2013 Aerospace series - Elements of electrical and optical connection - Test methods - Part 214 : lightning strike, current and voltage pulse
• FD E23-008-4*FD ISO/TR 10064-4:1999 Cylindrical gears. Code of inspection practice. Part 4: recommendations relative to surface texture and tooth contact pattern checking.

SAE - SAE International, tap and touch

• SAE AS430-1996 Powerplant Fire Detection Instruments - Thermal and Flame Contact Types (Turbine)
• SAE AS1355-1974 ULTRASONIC TRANSDUCERS@ IMMERSION AND CONTACT Performance Parameters
• SAE AS401B-1961 POWERPLANT FIRE DETECTION INSTRUMENTS - THERMAL & FLAME CONTACT TYPES (RECIPROCATING ENGINE POWERED AIRCRAFT)
• SAE AS39029/79-2000 Contacts@ Electrical Connector@ Pin@ Crimp Removable@ Shielded (for MIL-C-28748/9 Connectors)
• SAE AS39029/55-2000 CONTACTS@ ELECTRICAL CONNECTOR@ SOCKET@ CRIMP REMOVABLE@ SHIELDED (FOR MIL-C-26500(USAF) AND MIL-C-26518(USAF) CONNECTORS)
• SAE AS38999/49-1998 Connectors@ Electrical@ Circular@ Miniature@ High Density@ Quick Disconnect (Bayonet@ Threaded@ and Breech Coupling)@ Environment Resistant@ Removable Crimp and Hermetic Solder Contacts@ Receptable@ in Line Cable@ Breech Coupling@ Removable Crimp Contacts
• SAE AS38999/49A-1998 Connectors@ Electrical@ Circular@ Miniature@ High Density@ Quick Disconnect (Bayonet@ Threaded@ and Breech Coupling)@ Environment Resistant@ Removable Crimp and Hermetic Solder Contacts@ Receptable@ in Line Cable@ Breech Coupling@ Removable Crimp Contacts
• SAE AS81511/6-2014 CONNECTOR@ PLUG@ ELECTRICAL@ CIRCULAR@ HIGH DENSITY@ QUICK DISCONNECT@ ENVIRONMENT RESISTING@ CRIMP TYPE CONTACTS; AND ACCESSORIES (CLASS A@ F@ AND E - SERIES 2)
• SAE AS81511/5-2014 CONNECTOR@ RECEPTACLE@ CABLE CONNECTING ELECTRICAL@ CIRCULAR@ HIGH DENSITY@ QUICK DISCONNECT ENVIRONMENT RESISTING@ CRIMP TYPE CONTACTS; AND ACCESSORIES (CLASS A@ F@ AND E - SERIES 2)
• SAE AS39029/59B-2016 Contacts, electrical connector, socket, crimp removable, shielded, size 8 (for MIL-DTL-38999 series I, III, and IV connectors)
• SAE AS81511/21-2014 CONNECTOR@ RECEPTACLE@ FLANGE MOUNT@ ELECTRICAL@ CIRCULAR@ HIGH DENSITY@ QUICK DISCONNECT@ ENVIRONMENT RESISTING@ CRIMP TYPE CONTACTS@ CLASS A@ F@ AND E (SERIES 1)
• SAE AS39029/59-2000 Contacts@ Electrical Connector@ Socket@ Crimp Removable@ Shielded@ Size 8 (for MIL-C-38999 Series I@ III@ and IV Connectors)
• SAE AS81511/1-2014 CONNECTOR@ RECEPTACLE@ FLANGE MOUNT@ ELECTRICAL@ CIRCULAR@ HIGH DENSITY@ QUICK DISCONNECT@ ENVIRONMENT RESISTING@ CRIMP TYPE CONTACTS AND ACCESSORIES (CLASS A@ F@ AND E - SERIES 2)
• SAE AS81511/3-2014 CONNECTOR@ RECEPTACLE@ JAM NUT MOUNT@ ELECTRICAL@ CIRCULAR@ HIGH DENSITY@ QUICK DISCONNECT@ ENVIRONMENT RESISTING@ CRIMP TYPE CONTACTS; AND ACCESSORIES (CLASS A@ F@ AND E - SERIES 2)
• SAE AS81511/23-2014 CONNECTOR@ RECEPTACLE@ JAM NUT MOUNT@ ELECTRICAL@ CIRCULAR@ HIGH DENSITY@ QUICK DISCONNECT@ ENVIRONMENT RESISTING@ CRIMP TYPE CONTACTS@ CLASS A@ F@ AND E (SERIES 1)
• SAE AS39029/71-2000 Contacts@ Electrical Connector@ Pin@ Removable@ Solderless Wrappost Termination (for MIL-C-38999 Series I@ II@ III and IV@ MIL-C-24308@ MIL-C-83733@ and MIL-C-55302/69 Connectors) (FSC 5935)
• SAE AS38999/40-1998 Connectors@ Electrical@ Circular@ Miniature@ High Density@ Quick Disconnect (Bayonet@ Threaded@ and Breech Coupling)@ Environmental Resistant@ Removable Crimp and Hermetic Solder Contacts@ Receptacle@ Wall Mounting Flange@ Breech Coupling@ Removable Crimp
• SAE AS38999/40A-1998 Connectors@ Electrical@ Circular@ Miniature@ High Density@ Quick Disconnect (Bayonet@ Threaded@ and Breech Coupling)@ Environmental Resistant@ Removable Crimp and Hermetic Solder Contacts@ Receptacle@ Wall Mounting Flange@ Breech Coupling@ Removable Crimp

Society of Automotive Engineers (SAE), tap and touch

• SAE AS430-2008 Powerplant Fire Detection Instruments - Thermal and Flame Contact Types (Turbine)
• SAE AS1355A-1974 Ultrasonic Transducers, Immersion and Contact, Performance Parameters
• SAE AS38999/41A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Box Mounting Flange, Hermetic, Breech Coupling,...
• SAE AS38999/49A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, in Line Cable, Breech Coupling, Removable Crimp ...
• SAE AS38999/46A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environmental Resistant, Removable Crimp and Hermetic Solder Contacts, Plug, Breech Coupling, Emi Grounding, Removable Crimp Cont...
• SAE AS8028-1991 POWERPLANT FIRE DETECTION INSTRUMENTS THERMAL & FLAME CONTACT TYPES (RECIPROCATING AND TURBINE ENGINE POWERED AIRCRAFT)
• SAE AS38999/44A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Couplings), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Jam-Nut Mounting, Breech Coupling, Removable Cr...
• SAE AS38999/42A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Box Mounting Flange, Breech Coupling, Removable ...
• SAE AS38999/40A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environmental Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Wall Mounting Flange, Breech Coupling, Removab...
• SAE AS38999/45A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Solder Mounting, Hermetic, Breech Coupling, Herm...
• SAE AS38999/48A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Weld Mounting Hermetic, Breech Coupling, Hermeti...
• SAE AS38999/43A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Receptacle, Jam Nut Mounting, Hermetic, Breech Coupling, He...
• SAE AS39029/79A-2009 Contacts, electrical connector, pin, crimp removable, shielded (for MIL-DTL-28748/9 connectors)
• SAE AS39029/18B-2010 Contacts, Electrical Connector, Pin, Crimp Removable (For MIL-C-81511 Series 3 and 4 Connectors)
• SAE AS38999/47A-2000 Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded, and Breech Coupling), Environment Resistant, Removable Crimp and Hermetic Solder Contacts, Plug, Breech Coupling, Removable Crimp Contacts, Series Iv, Metric
• SAE AS39029/55A-2012 Contacts, electrical connector, socket, crimp removable, shielded (for MIL-DTL-26500 and MIL-DTL-26518 connectors)
• SAE AS39029/75A-2010 Contacts, Electrical Connector, Socket, Crimp Removable, Shielded, Size 12 (for MIL-DTL-38999 Series I, III, and IV Connectors)
• SAE AS81511/6A-2020 CONNECTOR, PLUG, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS; AND ACCESSORIES (CLASS A, F, AND E - SERIES 2)
• SAE AS81511/5A-2020 CONNECTOR, RECEPTACLE, CABLE CONNECTING ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS; AND ACCESSORIES (CLASS A, F, AND E - SERIES 2)
• SAE AS39029/57A-2012 Contacts, electrical connectors, socket crimp removable (for MIL-DTL-24308, MIL-DTL-38999 series II, MIL-DTL-55302/68, /71, /72, /75 and MIL-DTL-83733 connectors)
• SAE AS39029/59A-2010 Contacts, electrical connector, socket, crimp removable, shielded, size 8 (for MIL-DTL-38999 series I, III, and IV connectors)
• SAE AS81511/21A-2020 CONNECTOR, RECEPTACLE, FLANGE MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS, CLASS A, F, AND E (SERIES 1)
• SAE AS81511/1A-2020 CONNECTOR, RECEPTACLE, FLANGE MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS AND ACCESSORIES (CLASS A, F, AND E - SERIES 2)
• SAE AS39029/106B-2011 Contacts, Electrical Connector, Socket, Crimp Removable (For MIL-DTL-38999 Series I, III, IV, MIL-DTL-55302 and AS29600 Series A Connectors)
• SAE AS81511/3A-2020 CONNECTOR, RECEPTACLE, JAM NUT MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS; AND ACCESSORIES (CLASS A, F, AND E - SERIES 2)
• SAE AS81511/23A-2020 CONNECTOR, RECEPTACLE, JAM NUT MOUNT, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING, CRIMP TYPE CONTACTS, CLASS A, F, AND E (SERIES 1)
• SAE AS39029/71A-2010 Contacts, electrical connector, pin, removable, solderless wrappost termination (for MIL-DTL-38999 series I, II, III and IV, MIL-DTL-24308, MIL-DTL-83733, and MIL-DTL-55302/69 connectors)

CENELEC - European Committee for Electrotechnical Standardization, tap and touch

• EN 119000:1996 Generic Specification: Dry and Mercury Wetted Reed Contact Units
• EN 60947-4-1:2001 Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters

International Electrotechnical Commission (IEC), tap and touch

• IEC 61138:1992 Cables for portable earthing and short-circuiting equipment
• ISO/IEC 14443-2:2020 Cards and security devices for personal identification - Contactless proximity objects - Part 2: Radio frequency power and signal interface
• IEC 60947-4-1/COR1:2001 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor starters
• IEC 60947-4-1:2002 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor-starters
• IEC 60947-4-1:2009 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
• IEC 60947-4-1:2000 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor starters
• IEC 60947-4-1/AMD1:2002 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters; Electromechanical contactors and motor starters; Amendment 1
• IEC 60947-4-1:2009/AMD1:2012 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters; Amendment 1
• IEC 60309-2:2012 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
• IEC 60309-2:2021 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
• IEC 60335-2-110:2013+AMD1:2019 CSV Household and similar electrical appliances - Safety - Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators
• IEC 60335-2-110:2013/AMD1:2019 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators
• ISO/IEC 14443-3:2016/AMD1:2016 Amendment 1 - Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision - RFU handling rules

European Committee for Standardization (CEN), tap and touch

• prEN 61095-1991 Electromechanical contactors for household and similar purposes
• EN 4531-002:2016 Aerospace series - Connectors@ optical@ circular@ single and multipin@ coupled by triple start threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements
• EN ISO 12127-1:2015 Clothing to protect against heat and flame - Determination of contact heat transmission through clothing or constituent materials - Part 1: Contact heat produced by heating cylinder (ISO 12127-1:2015)
• EN 12240:1997 Touch and close fasteners - Determination of the overall and effective widths of tapes and the effective width of a closure
• EN 3218-002:2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements
• EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
• EN 4531-002:2012 Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements
• EN 4165-002:2015 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 002: Specification of performance and contact arrangements
• PD CEN/TS 16794-2:2017 Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443
• PD CEN/TS 16794-2:2015 Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443
• PD CEN/TS 16794-1:2017 Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443
• PD CEN/TS 16794-1:2015 Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443

RO-ASRO, tap and touch

• STAS 10626/2-1981 Electrodes for resistance spot welding ELECTRODE CAPS Forms and dimensions

RU-GOST R, tap and touch

• GOST IEC 61095-2015 Electromechanical contactors for household and similar purposes
• GOST 23792-1979 Electric resistance welded joints. Main types, design elements and dimensions
• GOST 9871-1975 Glass mercury electric-contact thermometers and thermoregulators. Specifications
• GOST 27387-1987 Industrial robots for contact spot welding. Basic parameters and dimensions
• GOST 25444-1990 Straight electrodes and electrode adapters for resistance spot welding. Taper fits. Dimensions
• GOST 25154-1982 Terminal contact blocks with flat terminals. Design, main parametrs and dimensions
• GOST 30011.4.1-1996 Low-voltage switchgear and controlgear. Part 4. Contactors and motor-starters. Section 1. Electromechanical contactors and motor-starters
• GOST R ISO/IEC 14443-2-2014 Identification cards. Contactless integrated circuit cards. Proximity cards. Part 2. Radio frequency power and signal interface
• GOST 13137-1982 Printers for contact printing of 16, 35-and 70-mm motion picture films. Exposed areas. Dimensions and location. Test methods
• GOST R ISO/IEC 14443-3-2014 Identification cards. Contactless integrated circuit cards. Proximity cards. Part 3. Initialization and anticollision
• GOST R ISO/IEC 15693-3-2011 Identification cards. Contactless integrated circuit cards. Vicinity cards. Part 3. Anticollision and transmission protocol
• GOST R ISO/IEC 15693-2-2013 Identification cards. Contactless integrated circuit cards. Vicinity cards. Part 2. Air interface and initialization
• GOST 32321-2013 Alarms guarding surface shock-contact glass break detectors for use in buildings. General requirements and test methods

Korean Agency for Technology and Standards (KATS), tap and touch

• KS X ISO/IEC 7816-2:2011 Identification cards-Integrated circuit(s) cards with contacts-Part 2:Dimensions and location of the contacts
• KS C 5944-1995 Integrated circuit(s) cards with contact Part 3:Electronic signals and transmission protocols
• KS X ISO/IEC 14443-2:2020 Identification cards — Contactless integrated circuit(s) cards —Proximity cards — Part 2: Radio frequency power and signal interface
• KS C IEC 60947-4-1-2016(2021) Low－voltage switchgear and controlgear－Part 4－1：Contactors and motor－starters－Electromechanical contactors and motor－starters
• KS X 6923-2-2014 Contactless pre-paid/post pay IC card — Purchase SAM — Part 2: Command and protocols
• KS X 6923-2-2009 Contactless pre-paid/post pay IC card-Purchase SAM Part 2:Command and protocols
• KS X 6924-2-2009 Contactless pre-paid/post pay IC card-User card-Part 2:Commands and protocols
• KS X 6924-2-2014 Contactless pre-paid/post pay IC card — User card — Part 2: Commands and protocols
• KS X ISO/IEC 7816-9:2007 Identification cards-Integrated circuit(s) cards with contacts-Part 9:Additional interindustry commands and security attributes
• KS X 6923-2-2004 Contactless pre-paid/post pay IC card — Purchase SAM — Part 2: Command and protocols
• KS X 6924-2-2014(2019) Contactless pre-paid/post pay IC card — User card — Part 2: Commands and protocols
• KS X 6923-2-2014(2019) Contactless pre-paid/post pay IC card — Purchase SAM — Part 2: Command and protocols
• KS C IEC 60947-4-1:2016 Low－voltage switchgear and controlgear－Part 4－1：Contactors and motor－starters－Electromechanical contactors and motor－starters
• KS X ISO/IEC 10536-3:2001 Identification cards-Contactless integrated circuit(s) cards-Part 3:Electronic signals and reset procedures
• KS X ISO/IEC 10536-3_2001-2007(2022) Identification cards－Contactless integrated circuit(s) cards－Part 3：Electronic signals and reset procedures
• KS X ISO/IEC 10536-2_2001-2007(2012) Identification cards－Contactless integrated circuit(s) cards－Part 2：Dimensions and location of coupling areas
• KS X ISO/IEC 10536-2_2001-2007(2022) Identification cards－Contactless integrated circuit(s) cards－Part 2：Dimensions and location of coupling areas
• KS X ISO/IEC 10536-3_2001-2007(2012) Identification cards－Contactless integrated circuit(s) cards－Part 3：Electronic signals and reset procedures
• KS X ISO/IEC 10536-2:2001 Identification cards-Contactless integrated circuit(s) cards-Part 2:Dimensions and location of coupling areas
• KS X 6923-1-2014 Contactless pre-paid/post pay IC card — Purchase SAM — Part 1: Physical characteristics and basic structure
• KS X 6923-1-2009 Contactless pre-paid/post pay IC card-Purchase SAM Part 1:Physical characteristics and basic structure
• KS B ISO 12715:2008 Ultrasonic non-destructive testing－Reference blocks and test procedures for the characterization of contact search unit beam profiles
• KS X ISO/IEC 15693-3-2010(2015) Identification cards－Contactless integrated circuit(s) cards－Vicinity cards－Part 3：Anticollision and transmission protocol
• KS X 6924-1-2014 Contactless pre-paid/post pay IC card — User card — Part 1: Physical characteristics and basic structure
• KS X 6924-1-2009 Contactless pre-paid/post pay IC card-User card-Part 1:Physical characteristics and basic structure
• KS X 6923-1-2004 Contactless pre-paid/post pay IC card — Purchase SAM — Part 1: Physical characteristics and basic structure
• KS X 6923-1-2014(2019) Contactless pre-paid/post pay IC card — Purchase SAM — Part 1: Physical characteristics and basic structure
• KS X 6924-1-2014(2019) Contactless pre-paid/post pay IC card — User card — Part 1: Physical characteristics and basic structure
• KS X 6923-4-2014 Contactless pre-paid/post pay IC card — Purchase SAM — Part 4: Conformity test

Group Standards of the People's Republic of China, tap and touch

• T/CECS 10092-2020 Wall panels and floor slabs for prefabricated lightweight panel houses with corner connections

Association of German Mechanical Engineers, tap and touch

• VDI/VDE 3522 Blatt 1-2014 Dynamic behaviour of contact thermometers - Principles and characteristic values
• VDI/VDE/DGQ 2618 Blatt 13.2-2005 Inspection of measuring and test equipment - Test instruction for bore gauges with 2-point contact
• VDI/VDE 3522 Blatt 1 Berichtigung-2014 Dynamic behaviour of contact thermometers - Principles and characteristic values - Corrigendum concerning standard VDI/VDE 3522 Part 1:2014-09

German Institute for Standardization, tap and touch

• DIN 30730:2016-02 Mobile waste packer - Multi-bucket system vehicles and roller contact tipper vehicles - Requirements, connection dimensions
• DIN 30722-1:2021-12 Roller contact tipper vehicles, roller containers - General requirements and marking - Part 1: Roller contact tipper vehicles up to 26 t, roller containers type 1570 made from steel / Note: DIN 30722-1 (2015-12) remains valid alongside this standard un...
• DIN 30722-3:2021-12 Roller contact tipper vehicles, roller containers - General requirements and marking - Part 3: Roller contact tipper vehicles up to 12 t, roller containers type 900 made from steel / Note: DIN 30722-3 (2015-12) remains valid alongside this standard unt...
• DIN 30722-2:2021-12 Roller contact tipper vehicles, roller containers - General requirements and marking - Part 2: Roller contact tipper vehicles up to 32 t, roller containers type 1570 made from steel / Note: DIN 30722-2 (2015-12) remains valid alongside this standard un...
• DIN 30722-2:2021 Roller contact tipper vehicles, roller containers - General requirements and marking - Part 2: Roller contact tipper vehicles up to 32 t, roller containers type 1570 made from steel
• DIN 30722-1:2021 Roller contact tipper vehicles, roller containers - General requirements and marking - Part 1: Roller contact tipper vehicles up to 26 t, roller containers type 1570 made from steel
• DIN 30722-3:2021 Roller contact tipper vehicles, roller containers - General requirements and marking - Part 3: Roller contact tipper vehicles up to 12 t, roller containers type 900 made from steel
• DIN 65180:1986 Aerospace; electrical circular connectors, medium and high density, rear release contacts; assembly procedures
• DIN SPEC 30752-2:2018-08 Skip loader and roller contact tipper vehicles - Environmental efficiency - Part 2: Theoretical calculation of energy consumption for multi-bucket system vehicles
• DIN EN 3218-002:2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements; German and English version EN 3218-002:2006
• DIN EN ISO 25178-601:2023-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO/DIS 25178-601:2023); German and English version prEN ISO 25178-601:2023 / Note: Date of issue 2023-10-06*Inten...
• DIN 41618-3:1974 Multipole connectors with blade contacts 2,5 mm 1 mm; locating and detent parts
• DIN 49440-4:1989 Two-pole socket-outlets with earthing rated for 10 A 250 V d.c., 16 A 250 V a.c.; gauges for portable socket-outlets
• DIN 41652-1:1990 Rack and panel connectors, trapezoidal, round contacts 1 mm; common mounting features and dimensions; survey of types
• DIN ISO 2971:2015-12 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus (ISO 2971:2013)
• DIN 41618-4:1976 Multipole connectors with blade contacts 2,5 mm 1 mm; housings and locking devices for connectors DIN 41618 and DIN 41622
• DIN 86266:2006 Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10
• DIN EN 4819:2012 Aerospace series - Contact Memory Button (CMB) tags intended for aircraft use; German and English version EN 4819:2012
• DIN EN 60947-4-1:2011 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2009); German version EN 60947-4-1:2010
• DIN 41615-1:1984 Connectors for rack and panel applications, rectangular, contacts with 1 and 1,6 mm diameter; common mounting features, survey of types
• DIN 16196:2015-03 Dial indicating thermometers with electrical limit contact devices - Filled system thermometers and bimetallic thermometers
• DIN EN 60947-4-1:2014 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (IEC 60947-4-1:2009 + A1:2012); German version EN 60947-4-1:2010 + A1:2012
• DIN ISO 2971:2015 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus (ISO 2971:2013)
• DIN CEN/TS 16794-2:2019-12*DIN SPEC 4622-2:2019-12 Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443; English version CEN/TS 16794-2:2019
• DIN 43167-1:1987-12 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c.; assembly
• DIN EN 4531-002:2008 Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements; German and English version EN 4531-002:2007
• DIN EN 3646-002:2008 Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements; German and English version EN 3646-002:2007
• DIN CEN/TS 16794-1:2019-12*DIN SPEC 4622-1:2019-12 Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443; English version CEN/TS 16794-1:2019
• DIN 43167-3:1987-12 Rod-type insulator for overhead contact lines for operating voltages up to 1000 V a.c. and 1500 V d.c; insulator
• DIN 49440-6:1989-12 Two-pole socket-outlets with earthing contact; 10 A 250 V d.c., 16 A 250 V a.c., for surface mounting and as portable type; dimensions

Japanese Industrial Standards Committee (JISC), tap and touch

• JIS C 8201-5-101:2008 Low-voltage switchgear and controlgear -- Part 5-101: Contactor relays and auxiliary contact for contactors and motor-starters
• JIS X 6323-2:2001 Identification cards -- Contactless integrated circuit(s) cards -- Vicinity cards -- Part 2: Air interface and initialization
• JIS X 6304:1996 Identification cards -- Integrated circuit(s) cards with contacts -- Part 3: Electronic signals and transmission protocols
• JIS A 1129-2:2001 Methods of test for length change of mortar and concrete Part 2: Method with contact-type strain gauge
• JIS A 1129-2:2010 Methods of measurement for length change of mortar and concrete -- Part 2: Method with contact-type strain gauge
• JIS X 6323-3:2001 Identification cards -- Contactless integrated circuit(s) cards -- Vicinity cards -- Part 3: Anticollision and transmission protocol
• JIS X 6322-2:2001 Identification cards -- Contactless integrated circuit(s) cards -- Proximity cards -- Part 2: Radio frequency power and signal interface

Professional Standard - Electron, tap and touch

• SJ 50598/2-2003 Detail specification for free connectors, electric, solder type, straight, bayonet coupling, series 1, classes E,F,J and P, for JY3116
• SJ 50599/4-2006 Detail specification for sheet connectors, electrical, circular, threaded, receptacle, box mounting flange, hermetic, hermetic solder contacts, series Ⅲ, J599/21 (classes N and Y)
• SJ 50598/1-2003 Detail specification for fixed connectors, electric, solder type, cable connecting, bayonet coupling, series 1, classes E,F,J and P, for JY3111
• SJ 50599/5-2006 Detail specification for sheet connectors, lectrical, circular, threaded, receptacle, JAM-NUT mounting, hermetic, hermetic solder contacts series Ⅲ, J599/23 (classes N and Y)
• SJ 50599/6-2006 Detail specification for sheet connectors electrical, circular, threaded, receptacle, solder mounting, hermetic, hermetic solder contacts series Ⅲ, J599/25 (classes N and Y)
• SJ 50599/7-2006 Detail specification for sheet connectors, electrical, circular, threaded, receptacle, weld mounting, hermetic, hermetic solder contacts series Ⅲ, J599/27 (classes N and Y)

Professional Standard - Machinery, tap and touch

• JB/T 51146-1999 Product quality classification of single-row four-point contact ball type and single-row cross-roller type slewing bearings

American National Standards Institute （ANSI), tap and touch

• ANSI PH3.200-1987 Photography (Darkroom Equipment) - Contact Printers and Printing Frames - Specifications
• ANSI/INCITS/ISO/IEC 14443-3:2011 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision
• ANSI/INCITS 119-1984 Contact Start/Stop Storage Disk, 158361 Flux Transitions per Track, 8.268 Inch (210 mm) Outer Diameter and 3.937 Inch (100 mm) Inner Diameter
• ANSI/INCITS/ISO/IEC 14443-2 AMD 1:2005 Identification cards - Contactless integrated circuit(s) cards - Proximity cards �� Part 2: Radio frequency power and signal interface - Amendment 1: Bit rates of fc/64@ fc/32 and fc/16

British Standards Institution (BSI), tap and touch

• BS AU 138b:2000 Towing vehicle, trailer and semi-trailer pneumatic braking systems - "Contact" type couplings
• BS EN 60947-4-1:2010+A1:2012 Low-voltage switchgear and controlgear. Contactors and motor-starters. Electromechanical contactors and motor-starters
• BS EN 119000:1997 Harmonized system of quality assessment for electronic components - Generic specification: dry and mercury wetted reed contact units
• BS ISO/IEC 14443-2:2016 Identification cards. Contactless integrated circuit cards. Proximity cards. Radio frequency power and signal interface
• BS ISO/IEC 14443-2:2010+A3:2012 Identification cards. Contactless integrated circuit cards. Proximity cards. Radio frequency power and signal interface
• BS ISO/IEC 14443-2:2010+A2:2012 Identification cards. Contactless integrated circuit cards. Proximity cards. Radio frequency power and signal interface
• BS EN IEC 60335-2-110:2021 Household and similar electrical appliances. Safety. Particular requirements for commercial microwave appliances with insertion or contacting applicators
• BS EN ISO 14122-1:2016 Tracked Changes. Safety of machinery. Permanent means of access to machinery. Choice of fixed means and general requirements of access
• BS EN IEC 60309-2:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Dimensional compatibility requirements for pin and contact-tube accessories
• BS ISO/IEC 10373-6:2020+A1:2021 Cards and security devices for personal identification. Test methods - Contactless proximity objects
• BS ISO/IEC 14443-4:2018+A2:2020 Cards and security devices for personal identification. Contactless proximity objects - Transmission protocol
• BS ISO/IEC 14443-2:2020+A1:2021 Cards and security devices for personal identification. Contactless proximity objects - Radio frequency power and signal interface
• BS ISO/IEC 14443-3:2018+A1:2021 Cards and security devices for personal identification. Contactless proximity objects - Initialization and anticollision
• BS EN ISO 14122-3:2016 Tracked Changes. Safety of machinery. Permanent means of access to machinery. Stairs, stepladders and guard-rails
• BS EN ISO 14122-2:2016 Tracked Changes. Safety of machinery. Permanent means of access to machinery. Working platforms and walkways
• BS AU 5:1963 Specification for dimensions of a 'contact' type coupling for vacuum and pressure braking systems on trailers and semi-trailers
• BS EN 3218-002:2006 Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements
• BS ISO/IEC 14443-1:2018 Tracked Changes. Cards and security devices for personal identification. Contactless proximity objects. Physical characteristics
• BS ISO/IEC 10373-7:2019 Cards and security devices for personal identification. Test methods - Contactless vicinity objects
• BS ISO/IEC 18745-2:2021 Tracked Changes. Test methods for machine readable travel documents (MRTD) and associated devices. Test methods for the contactless interface
• BS ISO/IEC 15693-2:2019 Tracked Changes. Cards and security devices for personal identification. Contactless vicinity objects. Air interface and initialization
• BS PD CEN/TS 16794-2:2015 Public transport. Communication between contactless readers and fare media. Test plan for ISO/IEC 14443
• PD CEN/TS 16794-2:2019 Public transport. Communication between contactless readers and fare media. Test plan for ISO/IEC 14443
• BS PD CEN/TS 16794-1:2015 Public transport. Communication between contactless readers and fare media. Implementation requirements for ISO/IEC 14443
• BS ISO 2971:2013 Cigarettes and filter rods. Determination of nominal diameter. Method using a non-contact optical measuring apparatus
• PD CEN/TS 16794-1:2019 Public transport. Communication between contactless readers and fare media. Implementation requirements for ISO/IEC 14443
• 16/30335629 DC BS ISO/IEC 14443-2 AMD2. Identification cards. Contactless integrated circuit cards. Proximity cards. Part 2. Radio frequency power and signal interface
• 18/30342192 DC BS ISO/IEC 14443-2 AMD3. Identification cards. Contactless integrated circuit cards. Proximity cards - Part 2. Radio frequency power and signal interface
• 16/30299952 DC BS ISO/IEC 14443-2 AMD1. Identification cards. Contactless integrated circuit cards. Proximity cards. Part 2. Radio frequency power and signal interface
• BS EN 4531-002:2007 Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 002：Specification of performance and contact arrangements
• BS EN 4531-002:2012 Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Specification of performance and contact arrangements
• BS EN 4531-002:2008 Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring. Flush contacts. Specification of performance and contact arrangements
• BS EN 4531-002:2016 Aerospace series. Connectors, optical, circular, single and multipin, coupled by triple start threaded ring. Flush contacts. Specification of performance and contact arrangements
• BS EN 62196-2:2012 Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories
• BS ISO/IEC 15693-1:2018 Tracked Changes. Cards and security devices for personal identification. Contactless vicinity objects. Physical characteristics
• 20/30416197 DC BS EN 60335-2-110 AMD2. Household and similar electrical appliances. Safety. Part 2-110. Particular requirements for commercial microwave appliances with insertion or contacting applicators
• 16/30351269 DC BS EN 60335-2-110 AMD1. Household and similar electrical appliances. Safety. Part 2-110. Particular requirements for commercial microwave appliances with insertion or contacting applicators
• 19/30388568 DC BS ISO/IEC 10373-6 AMD2. Cards and security devices for personal identification. Test methods. Part 6. Contactless proximity objects
• 19/30388565 DC BS ISO/IEC 14443-4 AMD2. Cards and security devices for personal identification. Contactless proximity objects. Part 4. Transmission protocol
• 19/30388562 DC BS ISO/IEC 14443-3 AMD2. Cards and security devices for personal identification. Contactless proximity objects. Part 3. Initialization and anticollision
• 18/30342198 DC BS ISO/IEC 14443-3 AMD2. Identification cards. Contactless integrated circuit cards. Proximity cards - Part 3. Initialization and anticollision
• BS ISO/IEC 15693-3:2019 Tracked Changes. Cards and security devices for personal identification. Contactless vicinity objects. Anticollision and transmission protocol
• 22/30451242 DC BS EN 60335-2-110. Household and similar electrical appliances. Safety. Part 2-110. Particular requirements for commercial microwave appliances with insertion or contacting applicators (Fragment 1)
• BS EN 50109-2-1:1996 Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Particular requirements - Radio frequency connectors and concentric contacts - Open throat tools with fixed dies, sizes

Professional Standard - Commodity Inspection, tap and touch

• SN/T 1029-2001 Rules for the inspection of low-voltage electromechanical contactors and motor starters for export
• SN/T 1431.4-2011 Rules for the inspection of low-voltage electrical apparatus for import and export.Part 4:Low-voltage electromechnical contactors and motor starters installations

ZA-SANS, tap and touch

• SANS 1477-3:2005 Pneumatic braking system connections between drawing and drawn vehicles Part 3: The arrangement of connections on vehicles, using contact type or palm type couplings
• SANS 1477-1:2005 Pneumatic braking system connections between drawing and drawn vehicles Part 1: Contact type couplings
• SANS 1477-1:2008 Pneumatic braking system connections between drawing and drawn vehicles Part 1: Contact type couplings
• SANS 15693-2:2009 Identification cards - Contactless integrated circuit cards - Vicinity cards Part 2: Air interface and initialization
• SANS 15693-2:2004 Identification cards - Contactless integrated circuit(s) cards - Vicinity cards Part 2: Air interface and initialization
• SANS 1505-1:2007 Ball type couplings and towing brackets for towing caravans and light trailers Part 1: Towing brackets and integrated towing devices
• SANS 14443-2:2004 Identification cards - Contactless integrated circuit(s) cards - Proximity cards Part 2: Radio frequency power and signal interface
• SANS 15693-3:2004 Identification cards - Contactless integrated circuit(s) cards - Vicinity cards Part 3: Anticollision and transmission protocol
• SANS 14443-3:2004 Identification cards - Contactless integrated circuit(s) cards - Proximity cards Part 3: Initialization and anticollision

United States Navy, tap and touch

• NAVY MS3147 REV D VALID NOTICE 3-2005 CONNECTOR, PLUG, ELECTRIC CRIMP TYPE, PUSH - PULL COUPLING SERIES 2 (CLASS E AND J)
• NAVY MS3147 REV D (1)-2000 CONNECTOR, PLUG, ELECTRIC CRIMP TYPE, PUSH - PULL COUPLING SERIES 2 (CLASS E AND J)
• NAVY MS3147 REV D NOTICE 2-1999 CONNECTOR, PLUG, ELECTRIC CRIMP TYPE, PUSH - PULL COUPLING SERIES 2 (CLASS E AND J)
• NAVY MS3147 REV D-1971 CONNECTOR, PLUG, ELECTRIC CRIMP TYPE, PUSH - PULL COUPLING SERIES 2 (CLASS E AND J)
• NAVY MS3148 REV D VALID NOTICE 3-2005 CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE LANYARD, PUSH-PULL COUPLING SERIES 2 (CLASS E AND J)
• NAVY MS3148 REV D (1)-2000 CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE LANYARD, PUSH-PULL COUPLING SERIES 2 (CLASS E AND J)
• NAVY MS3148 REV D NOTICE 2-1999 CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE LANYARD, PUSH-PULL COUPLING SERIES 2 (CLASS E AND J)
• NAVY MS3148 REV D-1971 CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE LANYARD, PUSH-PULL COUPLING SERIES 2 (CLASS E AND J)
• NAVY QPL-AS29600-QPD-2011 Connectors, Electrical, Circular, Miniature, Composite, High Density, Quick Coupling, Environment Resistant, Removable Crimp Contacts Associated Hardware, General Specification for

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, tap and touch

• GB/T 33739-2017 Test methods for radio frequency interface of contactless reader based on 13.56MHz and 2.45GHz dual-frequency technology
• GB/T 33742-2017 Technical requirements for radio frequency interface of contactless reader based on 13.56MHz and 2.45GHz dual-frequency technology
• GB 22757.2-2017 Energy consumption label for light-duty vehicles—Part 2: For off-vehicle-chargeable hybrid electric vehicles and pure electric vehicles

KR-KS, tap and touch

• KS X ISO/IEC 14443-2-2020 Identification cards — Contactless integrated circuit(s) cards —Proximity cards — Part 2: Radio frequency power and signal interface
• KS X ISO/IEC 15693-2-2003(2023) Identification cards — Contactless integrated circuit(s) cards —Vicinity Cards — Part 2: Air interface and initialization
• KS C IEC 60947-4-1-2016 Low－voltage switchgear and controlgear－Part 4－1：Contactors and motor－starters－Electromechanical contactors and motor－starters

American Society of Mechanical Engineers (ASME), tap and touch

• ASME B89.1.2M-1991 Calibration of Gage Blocks by Contact Comparison Methods (Through 20 in. and 500 mm)
• ASME B89.1.2M-1991/errata-2014 Calibration of Gage Blocks by Contact Comparison Methods (Through 20 in. and 500 mm)

European Telecommunications Standards Institute (ETSI), tap and touch

• ETSI TS 102613 V 16.0.0-2021 Smart Cards - UICC - Contactless Front-end (CLF) Interface - Physical and data link layer characteristics (Release 16)
• ETSI TS 102 613-2008 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Part 1: Physical and data link layer characteristics V7.3.0; Release 7
• ETSI TS 103 115-2015 Smart Cards; Test specification for UICC Application Programming Interface for Java Card? for Contactless Applications; Test Environment and Annexes (V9.4.0; Release 9; Includes Diskette)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, tap and touch

• GB 14048.4-2003 Low-voltage switchgear and controlgear-Electromechanical contactors and motor-starters
• GB 14048.4-1993 Low-voltage switchgear and controlgear. Low-voltage electromechanical contactors and motor starters
• GB/T 42756.2-2023 Cards and security devices for personal identification—Contactless proximity objects—Part 2: Radio frequency power and signal interface
• GB/T 14048.4-2010 Low-voltage switchgear and controlgear.Part 4-1:Contactors and motor-starters.Electromechanical contactors and motor-starters (Including motor protector)
• GB 14048.4-2010 Low-voltage switchgear and controlgear.Part 4-1:Contactors and motor-starters.Electromechanical contactors and motor-starters (Including motor protector)
• GB/T 22351.2-2010 Identification cards.Contactless integrated circuit(s) cards.Vicinity cards.Part 2:Air interface and initalzation
• GB/T 42756.3-2023 Contactless proximity objects for card and identification security devices - Part 3: Initialization and anti-collision
• GB 22757.2-2023 Light vehicle energy consumption labeling Part 2: Externally rechargeable hybrid electric vehicles and pure electric vehicles

VN-TCVN, tap and touch

• TCVN 6592-4-1-2009 Low-voltage switchgear and controlgear.Part 4-1: Contactors and motor-starters.Electromechanical contactors and motor-starters

European Committee for Electrotechnical Standardization（CENELEC）, tap and touch

• EN 60947-4-1:2010 Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Incorporates Amendment A1: 2012)
• EN IEC 60309-2:2022 Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories
• EN IEC 60335-2-110:2021 Household and similar electrical appliances - Safety - Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators

International Organization for Standardization (ISO), tap and touch

• ISO/DIS 25178-601:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Design and characteristics of contact (stylus) instruments
• ISO/IEC 15693-2:2006 Identification cards - Contactless integrated circuit cards - Vicinity cards - Part 2: Air interface and initialization
• ISO/IEC CD 10373-6 Cards and security devices for personal identification — Test methods — Part 6: Contactless proximity objects
• ISO/IEC 15693-2:2019 Cards and security devices for personal identification — Contactless vicinity objects — Part 2: Air interface and initialization
• ISO/IEC 15693-3:2019 Cards and security devices for personal identification — Contactless vicinity objects — Part 3: Anticollision and transmission protocol
• ISO 12715:1999 Ultrasonic non-destructive testing - Reference blocks and test procedures for the characterization of contact search unit beam profiles
• ISO/IEC 14443-2:2020/Cor 2 Cards and security devices for personal identification — Contactless proximity objects — Part 2: Radio frequency power and signal interface — Technical Corrigendum 2
• ISO/IEC 14443-2:2020/CD Cor 2 Cards and security devices for personal identification — Contactless proximity objects — Part 2: Radio frequency power and signal interface — Technical Corrigendum 2
• ISO/IEC 14443-2:2020/Cor 2:2023 Cards and security devices for personal identification — Contactless proximity objects — Part 2: Radio frequency power and signal interface — Technical Corrigendum 2
• ISO 2971:2013 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus
• ISO/IEC 18745-2:2021 Test methods for machine readable travel documents (MRTD) and associated devices — Part 2: Test methods for the contactless interface
• ISO/IEC 14443-2:2001/Amd 1:2005 Identification cards — Contactless integrated circuit(s) cards — Proximity cards — Part 2: Radio frequency power and signal interface — Amendment 1: Bit rates of fc/64, fc/32 and fc/16
• ISO/IEC 14443-3:2001/Amd 1:2005 Identification cards — Contactless integrated circuit(s) cards — Proximity cards — Part 3: Initialization and anticollision — Amendment 1: Bit rates of fc/64, fc/32 and fc/16

IT-UNI, tap and touch

• UNI 11508-2021 Specification and qualification of welding procedures for poliethylene - WPS for welding with the electrofusion method and WPS for welding with the thermal element method by contact
• UNI 10520-2021 Welding of plastic materials - Welding for thermal elements by contact - Welding of polyethylene butt-joints pipes and/or fittings for the transport of fuel gas, water and other pressurized fluids

API - American Petroleum Institute, tap and touch

• API STD 670-1976 NONCONTACTING VIBRATION AND AXIAL POSITION MONITORING SYSTEM (First Edition; ERTA: January 1984)

Military Standard of the People's Republic of China-General Armament Department, tap and touch

• GJB 598/6-2011 Detail specification for series 1 JY3116 bayonet coupling solder contact straight plug (classes E、F、J and P)
• GJB 598/1-2011 Detail specification for series 1 JY3110 bayonet coupling solder contact wall mounting receptacle (classes E、F、J and P)

ETSI - European Telecommunications Standards Institute, tap and touch

• TS 102 613-2018 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Physical and data link layer characteristics (V11.1.0; Release 11)
• TS 102 613-2009 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Part 1: Physical and data link layer characteristics (V9.0.0; Release 9)
• TS 102 613-2012 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Part 1: Physical and data link layer characteristics (V11.0.0; Release 11)
• TS 102 613-2010 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Part 1: Physical and data link layer characteristics (V9.1.0; Release 9)
• TS 102 613-2011 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Part 1: Physical and data link layer characteristics (V8.2.0; Release 8)
• TS 102 613-2008 Smart Cards; UICC -- Contactless Front-end (CLF) Interface; Part 1: Physical and data link layer characteristics (V7.1.0; Release 7)
• TS 102 613-2007 Smart Cards; UICC - Contactless Front-end (CLF) Interface; Part 1: Physical and data link layer characteristics (V7.0.0; Release 7)
• TS 103 115-2015 Smart Cards; Test specification for UICC Application Programming Interface for Java Card? for Contactless Applications; Test Environment and Annexes (V9.4.0; Release 9; Includes Diskette)

Danish Standards Foundation, tap and touch

• DS/ISO/IEC 15693-2:2007 Identification cards - Contactless integrated circuit cards - Vicinity cards - Part 2: Air interface and initialization
• DS/ISO/IEC 14443-2:2011 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 2: Radio frequency power and signal interface
• DS/EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
• DS/ISO/IEC 10536-3:1998 Identification cards - Contactless integrated circuit(s) cards - Part 3: Electronic signals and reset procedures
• DS/ISO/IEC 10536-2:1996 Identification cards - Contactless integrated circuit(s) cards - Part 2: Dimensions and location of coupling areas
• DS/ISO/IEC 14443-3:2011 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision
• DS/ISO/IEC 15693-3:2009 Identification cards - Contactless integrated circuit cards - Vicinity cards - Part 3: Anticollision and transmission protocol
• DS/ISO/IEC 18745-2:2021 Test methods for machine readable travel documents (MRTD) and associated devices – Part 2: Test methods for the contactless interface
• DS/ISO 2971:2013 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus
• DS/EN IEC 60335-2-110:2021 Household and similar electrical appliances – Safety – Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators
• DS/ISO/IEC 14443-2:2021 Cards and security devices for personal identification – Contactless proximity objects – Part 2: Radio frequency power and signal interface – Technical Corrigendum 1
• DS/EN ISO 10360-5:2010 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems
• DS/ISO/IEC 14443-2/Amd 2:2012 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 2: Radio frequency power and signal interface - AMENDMENT 2: Additional PICC classes
• DS/ISO/IEC 10373-6:2020 Cards and security devices for personal identification – Test methods – Part 6: Contactless proximity objects – AMENDMENT 2: Enhancements for harmonization
• DS/EN 4531-002:2012 Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements
• DS/ISO/IEC 14443-2/AMD 3:2012 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 2: Radio frequency power and signal interface - AMENDMENT 3: Bits rates of fc/8, fc/4 and fc/2

Canadian Standards Association (CSA), tap and touch

• CAN/CSA-ISO/IEC 15693-2:2007 Identification cards - Contactless integrated circuit cards - Vicinity cards - Part 2: Air interface and initialization
• CAN/CSA-ISO/IEC 14443-2C:2012 Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2: Radio frequency power and signal interface
• CAN/CSA-ISO/IEC 14443-2:2012 Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2: Radio frequency power and signal interface
• CSA C22.2 No.60947-4-1-07-CAN/CSA-2007 Low-Voltage Switchgear and Controlgear ?Part 4-1: Contactors and motor-starters ?Electromechanical contactors and motor-starters First Edition
• CSA ISO/CEI 10536-2-98-CAN/CSA:1998(R2002) Cartes d'identification - Cartes a circuit(s) integre(s) sans contact - Partie 2: Dimensions et emplacement des surfaces de couplage
• CAN/CSA-ISO/IEC 14443-3:2013 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 3: Initialization and anticollision
• CAN/CSA-ISO/IEC 10536-2:1998 Identification Cards - Contactless Integrated Circuit(s) Cards - Part 2: Dimensions and Location of Coupling Areas
• CAN/CSA-ISO/IEC 15693-3:2010 Identification cards - Contactless integrated circuit cards - Vicinity cards - Part 3: Anticollision and transmission protocol
• CSA ISO/IEC 14443-2:2021 Cards and security devices for personal identification - Contactless proximity objects - Part 2: Radio frequency power and signal interface (Adopted ISO/IEC 14443-2:2020, fourth edition, 2020-07)

Indonesia Standards, tap and touch

• SNI ISO/IEC 14443-2:2013 Identification cards - Contactless integrated circuit cards - Proximity cards - Part 2: Radio frequency power and signal interface

(U.S.) Ford Automotive Standards, tap and touch

• FORD ESR-M11P17-A-2007 ADHESIVE, CONTACT - GASKET AND SEAL ***TO BE USED WITH FORD WSS-M99P1111-A***

Standard Association of Australia （SAA）, tap and touch

• AS ISO/IEC 14443.2:2022 Cards and security devices for personal identification — Contactless proximity objects, Part 2: Radio frequency power and signal interface
• AS ISO/IEC 14443.4:2022 Cards and security devices for personal identification — Contactless proximity objects, Part 4: Transmission protocol
• AS ISO/IEC 14443.1:2022 Cards and security devices for personal identification — Contactless proximity objects, Part 1: Physical characteristics
• AS ISO/IEC 18745.2:2023 Test methods for machine readable travel documents (MRTD) and associated devices, Part 2: Test methods for the contactless interface
• AS ISO/IEC 14443.3:2022 Cards and security devices for personal identification — Contactless proximity objects, Part 3: Initialization and anticollision

未注明发布机构, tap and touch

• BS ISO/IEC 10373-6:2020+A2:2020 Cards and security devices for personal identification — Test methods Part 6 : Contactless proximity objects
• DIN EN ISO 19363:2022 Electrically powered road vehicles – Contactless energy transfer – Safety and interoperability requirements (ISO 19363:2020)

ANSI - American National Standards Institute, tap and touch

• INCITS/ISO/IEC 10536-3:1996 Identification cards - Contactless integrated circuit(s) cards — Part 3: Electronic signals and reset procedures
• INCITS/ISO/IEC 15693-2:2000 Identification cards Contactless integrated circuit(s) cards Vicinity cards Part 2: Air interface and initialization (Adopted by INCITS)
• INCITS/ISO/IEC 14443-2:2001 Identification cards Contactless integrated circuit(s) cards Proximity cards Part 2: Radio frequency power and signal interface (Adopted by INCITS)
• INCITS/ISO/IEC 14443-3:2001 Identification cards Contactless integrated circuit(s) cards Proximity cards Part 3: Initialization and anticollision (Adopted by INCITS)
• INCITS/ISO/IEC 10536-2:1995 Identification cards - Contactless integrated circuit(s) cards - Part 2: Dimensions and location of coupling areas (Adopted by INCITS)
• INCITS/ISO/IEC 15693-3:2000 Identification cards Contactless integrated circuit(s) cards Vicinity cards Part 3: Anticollision and transmission protocol (Adopted by INCITS)
• INCITS/ISO/IEC 15693-3:2001 Identification cards Contactless integrated circuit(s) cards Vicinity cards Part 3: Anticollision and transmission protocol (Adopted by INCITS)
• INCITS/ISO/IEC 14443-2 AMD 1:2005 Identification cards - Contactless integrated circuit(s) cards - Proximity cards — Part 2: Radio frequency power and signal interface - Amendment 1: Bit rates of fc/64@ fc/32 and fc/16

工业和信息化部, tap and touch

• JB/T 4009-2020 Non-destructive testing contact ultrasonic longitudinal wave pulse echo detection and evaluation method of discontinuity

NL-NEN, tap and touch

• NEN 10947-4-1-1993 Low-voltage switchgear and controlgear. Part 4: Contactors and motor-starters. Section one: Electromechanical contactors and motor-starters (IEC 947-4-1:1990)

IECQ - IEC: Quality Assessment System for Electronic Components, tap and touch

• QC 010000/ IN0001 IS 1-1992 Two Part Connectors for Printed Circuit Boards for Basic Grid of 2@54mm (0.1 Inch) with Common Mounting Euro Connectors Style R@ R/2 & HE11 (Connectors Conforming to 500 Mating Cycles and Having 1.27 Micron Gold Plating Finish over Contact Area)

国家市场监督管理总局、中国国家标准化管理委员会, tap and touch

• GB/T 14048.4-2020 Low-voltage switchgear and controlgear—Part 4-1: Contactors and motor-starters—Electromechanical contactors and motor-starters (Including motor protector)

ES-UNE, tap and touch

• UNE-EN IEC 60335-2-110:2022 Household and similar electrical appliances - Safety - Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators
• UNE-CEN/TS 16794-2:2019 Public transport - Communication between contactless readers and fare media - Part 2: Test plan for ISO/IEC 14443 (Endorsed by Asociación Española de Normalización in December of 2019.)
• UNE-CEN/TS 16794-1:2019 Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443 (Endorsed by Asociación Española de Normalización in December of 2019.)

American Society for Testing and Materials (ASTM), tap and touch

• ASTM D8164-19 Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing
• ASTM D8164-21 Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing
• ASTM D8164-18a Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing
• ASTM D8164-18 Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing

Underwriters Laboratories (UL), tap and touch

• UL 60947-4-1A (ND)-2007 National Differences For UL 60947-4-1A Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters (Second Edition; Reprint with Revisions Through and Including April 29@ 2011)
• UL 60947-4-1-2014 UL Standard for Safety Low-Voltage Switchgear and Controlgear �C Part 4-1: Contactors and Motor-Starters �C Electromechanical Contactors and Motor-Starters (Third Edition; Reprint with revisions through and including October 17@ 2017)
• UL 60947-4-1 (ND)-2014 National Differences For UL 60947-4-1 Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters (Third Edition; Reprint with Revisions Through and Including October 17@ 2017)

Aerospace, Security and Defence Industries Association of Europe (ASD), tap and touch

• ASD-STAN PREN 4531-002-2010 Aerospace series Connectors, optical, circular, single and multipin, coupled by threaded ring Flush contacts Part 002: Specification of performance and contact arrangements Edition P 2
• ASD-STAN PREN 4531-002-2014 Aerospace series Connectors, optical, circular, single and multipin, coupled by triple start threaded ring Flush contacts Part 002: Specification of performance and contact arrangements (Edition P 3)
• ASD-STAN PREN 3682-002-2000 Aerospace Series Connectors, Plug and Receptacle, Electrical, Rectangular, Interchangeable Insert Type, Rack to Panel, Operating Temperature 150 Degrees C Continuous Part 002: Specification of Performance and Contact Arrangements (Edition P 1)

CEN - European Committee for Standardization, tap and touch

• EN 4531-002:2007 Aerospace series - Connectors@ optical@ circular@ single and multipin@ coupled by threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements

European Association of Aerospace Industries, tap and touch

• AECMA PREN 3476-002-2001 Aerospace Series Connectors, Electrical, Circular, Bayonet Coupling, Operating Temperature 175 Degrees C or 200 Degrees C Continuous Part 002: Specification of Performance and Contact Arrangements Edition P 1

GOSTR, tap and touch

• GOST R 58443-2019 Certification of operators of contact butt flash welding process and welders of thermite welding of railway rails. General requirements
• GOST R 58343-2019 Information Technology. Test methods for machine readable travel documents (MRTD) and associated devices. Part 2. Test methods for the contactless interface

ECIA - Electronic Components Industry Association, tap and touch

• EIA-364-1004-2010 TS-1004 ENVIRONMENTAL TEST METHODOLOGY FOR VERIFYING THE CURRENT RATING OF FREESTANDING POWER CONTACTS OR ELECTRICAL CONNECTORS AND SOCKETS

Lithuanian Standards Office , tap and touch

• LST EN 4531-002-2012 Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements
• LST EN ISO 10360-5:2011 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)

AENOR, tap and touch

• UNE-EN ISO 10360-5:2012 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 5: CMMs using single and multiple stylus contacting probing systems (ISO 10360-5:2010)

Others:   afm contact and, tap and touch, Electromechanical contactors and motor starters, Low-voltage electromechanical contactors and motor starters, Low-voltage switchgear and controlgear Electromechanical contactors and motor starters.