ZH
RU
ES
particle size
particle size, Total:323 items.
In the international standard classification, particle size involves: Construction materials, Particle size analysis. Sieving, Freight distribution of goods, Packaging and distribution of goods in general, Raw materials for rubber and plastics, Fuels, Products of the chemical industry, Powder metallurgy, Insulating fluids, Electricity. Magnetism. Electrical and magnetic measurements, Aerosol containers, Electrical accessories, Data storage devices, Fishing and fish breeding, Education, Furniture, Materials for aerospace construction, Mechanical structures for electronic equipment, Test conditions and procedures in general, Fertilizers, Animal feeding stuffs, Paints and varnishes, Nuclear energy engineering, Road engineering, Cellular materials, Ergonomics, Construction industry, Analytical chemistry, Galvanic cells and batteries, Air quality, Wastes, Equipment for the rubber and plastics industries, Equipment for petroleum and natural gas industries, Ceramics, Insulation, Valves, Pipeline components and pipelines, Vocabularies, Graphic technology, Technical drawings, Photography, Cinematography, Non-ferrous metals, Machine tool systems.
CH-SNV, particle size
SE-SIS, particle size
ES-AENOR, particle size
Indonesia Standards, particle size
- SNI 4137-2012 Test method for determination of the smallest average size (UKR) and the largest average size (UBR) aggregate grains
- SNI 03-1753-1990 Coarse aggregates for concrete, Determination of fine grain smaller than 70 mikron
- SNI 03-1754-1990 Fine aggregates for mix and concrete, Determination of fine grain smaller than 50 mikron
- SNI 05-3283-1994 Four - port modular stack valves and four port directional control valves, size 03 and 05 - Clamping dimensions
RO-ASRO, particle size
American Society for Testing and Materials (ASTM), particle size
- ASTM UOP437-81 Size Distribution of Molecular Sieve Particles
- ASTM F660-83(1993) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
- ASTM F660-83(2019) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
- ASTM E2859-11(2023) Standard Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy
- ASTM E930-99(2015) Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
- ASTM D6933-13 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
- ASTM D3576-98 Standard Test Method for Cell Size of Rigid Cellular Plastics
- ASTM D7197/D7197M-21 Standard Table of Body Measurements for Misses Maternity Sizes Two to Twenty-Two (2-22)
- ASTM F328-98 Standard Practice for Calibration of an Airborne Particle Counter Using Monodisperse Spherical Particles
- ASTM F50-92(1996) Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
- ASTM F50-92(2001)e1 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
- ASTM D7619-10 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM F50-07 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
- ASTM E1458-92(2001) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
- ASTM E1458-12(2016) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
- ASTM D7619-12a Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
- ASTM E1458-12 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
- ASTM F50-12 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
- ASTM D7619-17 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
HU-MSZT, particle size
Korean Agency for Technology and Standards (KATS), particle size
- KS A 1608-1994 Dimensions of unit load sizes
- KS A 1608-1999 Dimensions of unit load sizes
- KS M 1425-2004 Testing method for particle size distribution of palletized media by sieving
- KS E ISO 2325-2002(2017) Metallic and other non-organic coatings－Measurement of coating thicknesses－Fizeau multiple-beam interferometry method
- KS C 8056-2-2005 Small-sized sealed lead-acid batteries(Valve regulated types)－Part 2：Dimensions, terminals and marking
- KS A ISO 13317-2:2004 Determination of particle size distribution by gravitational liquid sedimentation methods-Part 2:Fixed pipette method
- KS A ISO 13317-2:2014 Determination of particle size distribution by gravitational liquid sedimentation methods — Part 2: Fixed pipette method
- KS A ISO 13318-2:2014 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 2: Photocentrifuge method
- KS A ISO 13318-2:2009 Determination of particle size distribution by centrifugal liquid sedimentation methods-Part 2:Photocentrifuge method
- KS C 8056-2-2005(2015) Small-sized sealed lead-acid batteries(Valve regulated types)－Part 2：Dimensions, terminals and marking
- KS A ISO 13317-1:2003 Determination of particle size distribution by gravitational liquid sedimentation methods-Part 1:General principles and guidelines
- KS A ISO 13317-1:2014 Determination of particle size distribution by gravitational liquid sedimentation methods — Part 1: General principles and guidelines
- KS A ISO 13318-1:2014 Determination of particle size distribution by centrifugal liquid sedimentation methods — Part 1: General principles and guidelines
- KS A ISO 13318-1:2003 Determination of particle size distribution by centrifugal liquid sedimentation methods-Part 1:General principles and guidelines
- KS M ISO 8220-2003(2018)
- KS M ISO 1307:2018 Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
European Committee for Standardization (CEN), particle size
- EN 933-2:1996 Tests for Geometrical Properties of Aggregates - Part 2: Determination of Particle Size Distribution - Test Sieves, Nominal Size of Apertures
- EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
- EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
- EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
- EN 12457-2:2002 Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg for material with particle size below 4 mm (without or with size reduction)
- EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021)
- EN 12012-1:2000 Rubber and Plastics Machines - Size Reduction Machines - Part 1; Safety Requirements for Blade Granulators
- EN 12457-1:2002 Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 1: One stage batch test at a liquid to solid ratio of 2 l/kg for materials with high solid content and with particle size below 4 mm (without
- EN 12457-3:2002 Characterisation of waste - Leaching; Compliance test for leaching of granular waste materials and sludges - Part 3: Two stage batch test at a liquid to solid ratio of 2 l/kg and 8 l/kg for materials with high solid content and with particle size below 4
- EN ISO 1307:1995 Rubber and Plastics Hoses for General-Purpose Industrial Applications - Bore Diameters and Tolerances, and Tolerances on Length (ISO 1307 : 1992)
- EN ISO 1307:2008 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006)
- EN 15238:2006 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm
- EN 12012-1:2007 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators (Incorporates Amendment A1: 2008)
International Organization for Standardization (ISO), particle size
- ISO 3676:1983 Packaging; Unit load sizes; Dimensions
- ISO 13067:2020 Microbeam analysis — Electron backscatter diffraction — Measurement of average grain size
- ISO 19749:2021 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy
- ISO 8567:1986 Cinematography; Maximum permissible area for subtitle 35 mm and 16 mm motion-picture release prints; Dimensions and locations
- ISO/TS 19590:2017 Nanotechnologies — Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
- ISO 10076:1991 Metallic powder; determination of particle size distribution by gravitational sedimentation in a liquid and attenuation measurement
CZ-CSN, particle size
- CSN ISO 3676:1993 Packaking - Unit load sizes - Dimensions
- CSN 39 5022-1987 Minimal dimensions of bullet cartridge chambers
- CSN ISO 4497:1993 Metallic powders. Determination of particle size by dry sieving
- CSN 64 0907-1989 Plastics. Ion exchangers. Distribution and determination size of particles
- CSN 69 8042-1984 GRP. Horizontál Pressureless Cylindrical Vesgels. Slzes and Dimensions.
- CSN 39 5023-1993 The minimum size of chambers for the pistol and revolver cartridges
- CSN 69 8041-1984 GRP. Vertlcal Pressureless Cylindrical Ve?sels. Sizes and Dimensions.
- CSN 46 7092-40-1998 Testing methods for feeding stuffs - Part 40: Size determination of granules and briquettes
- CSN 63 1018-1983 Cross-ply tyres for heavy trueks, off-the- road and earth moving maohines. Size, basic dimensions, service requirements and marking
VN-TCVN, particle size
- TCVN 4307-2005 Coal.Method for determination of undersized or oversized proportions
- TCVN 4445-2009 Statistical quality control.Acceptance inspection by attributes for lots small size
German Institute for Standardization, particle size
- DIN 95413:2020 Wire rope isolators - Dimensions, sizes
- DIN EN 60970:2008 Insulating liquids - Methods for counting and sizing particles (IEC 60970:2007); German version EN 60970:2007 + Corrigendum: 2008
- DIN EN 15415-1:2011-11 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles; German version EN 15415-1:2011
- DIN EN 15415-2:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles; German version EN 15415-2:2012
- DIN ISO 13067:2021-08 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
- DIN EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm; English version of DIN EN 15238:2007-02
- DIN EN 15415-3:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
- DIN EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles; German version EN 15415-2:2012
- DIN EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles; German version EN 15415-1:2011
- DIN ISO 13067:2021 Microbeam analysis - Electron backscatter diffraction - Measurement of average grain size (ISO 13067:2020)
- DIN EN 12012-1:2007 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators; German version EN 12012-1:2007
- DIN EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles; German version EN 15415-3:2012
- DIN EN 15238:2023-01 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm; German version EN 15238:2022
- DIN EN 12457-1:2003-01 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 1: One stage batch test at a liquid to solid ration of 2 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-1:2002
- DIN EN 12457-2:2003-01 Characterization of waste - Leaching; Compliance test for leaching of granular and sludges - Part 2: One stage batch test at a liquid to solid ratio of 10 l/kg with particle size below 4 mm (without or with size reduction); German version EN 12457-2:2002
- DIN 54407:2023-06 Testing of ion exchange resins - Determination of bead size distribution for mono- and heterodisperse ion exchange resins
- DIN 16507-1:1998 Printing technology - Typesizes - Part 1: Hot metal type setting and related techniques
- DIN EN ISO 1307:2008-04 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006); German version EN ISO 1307:2008
- DIN EN ISO 19749:2023-07 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021); German version EN ISO 19749:2023
- DIN EN ISO 21363:2022-03 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020); German version EN ISO 21363:2022
- DIN CEN ISO/TS 19590:2019-11*DIN SPEC 19286:2019-11 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry (ISO/TS 19590:2017); German version CEN ISO/TS 19590:2019
- DIN 19045-3:1998 Projection of still pictures and motion-pictures - Part 3: Minimum dimensions for elements, width of lines, dimensions of lettering and graphical symbols in originals for projection
- DIN 69010:2011 Transfer centers - Interface machine frame - Multi spindle heads and other modular units, Frame sizes and dimensions
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, particle size
- GB/T 14853.5-2002 Rubber compounding ingredients--Carbon black,pelletized--Determination of pellet size distribution
- GB/T 38532-2020 Microbeam analysis—Electron backscatter diffraction—Measurement of average grain size
- GB 19520.19-2020 Dimensions of mechanical structures of electronic equipment 482.6 mm (19 in) series Part 3-107: Dimensions of miniaturized plug-in boxes and plug-ins
- GB/T 42732-2023 Size Distribution and Concentration Measurement of Inorganic Nanoparticles in Aqueous Phases in Nanotechnology by Single Particle Inductively Coupled Plasma Mass Spectrometry
PL-PKN, particle size
- PN T06419-1966 Electronic ?ubes Giant 5-pin base Dimensions
- PN T06404-1967 Electronic tub?* Jumbo 4-pln boa* Dimensioni
- PN T06405-1960 Electronic tubes. Smali butfon miniatur? 7-pin base. Dimensions
- PN T06406-1960 Elec?ronic tubes. Continental loc?al or b-base. Dimensions
- PN T06402-1971 Electronic ?gbes Smali bu??on Nowal 9-pin base Dimensions
- PN T06420-1971 Electronic tubes with smali bu??on Nowal 9-pin bas* Fundamental dimensions
- PN T06421-1960 Electronic ?ubes with smali button miniatur? 7-pin base. Principal dimensions
- PN M73060-1990 Hydraulic and pneumatic power. O-rings. According to ISO. Dimensions and size designation
- PN T06410-1962 Electronic tubes. Super jumbo 4-pin base with bayonet. Fundamen?al dimensions
- PN S48020-1986 Motor vehicles and trailers Towing couplings of a ?hook-ring" type Sizes, main dimen — sions and technical re?uirements
- PN T06413-1962 Electronic fubes ou?lines used wi?h smali bulton 9-pin bose and wi?h cylindricol caps. Fundamentol dimensions
- PN Z04002 Arkusz 05-1974 Air purity protection Tests of dust physical properties Determination of average porosity and average kinecic size of dust particles
- PN Z04002 Arkusz 03-1974 Air purity protection Tests of dust physical properties Determination of average mass and average statical volumetric size of dust particles
British Standards Institution (BSI), particle size
- BS EN 15415-1:2011 Solid recovered fuels. Determination of particle size distribution. Screen method for small dimension particles
- BS EN 60970:2007 Insulating liquids - Methods for counting and sizing particles
- BS EN 15415-2:2012 Solid recovered fuels. Determination of particle size distribution. Maximum projected length method (manual) for large dimension particles
- BS DD CEN/TS 15149-2:2006 Solid biofuels - Methods for the determination of particle size distribution - Vibrating screen method using sieve apertures of 3,15 mm and below
- BS EN 15415-3:2012 Solid recovered fuels. Determination of particle size distribution. Method by image analysis for large dimension particles
- BS EN 933-2:1996 Tests for geometrical properties of aggregates - Determination of particle size distribution - Test sieves, nominal size of apertures
- BS 7S 1:1964+A2:2015 Specification for Carbon steel bright bars for machining. (540 MPa; maximum size, 101 mm diameter or minor sectional dimension)
- BS ISO 13067:2020 Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
- BS DD CEN/TS 15149-3:2006 Solid biofuels - Methods for the determination of particle size distribution - Rotary screen method
- BS ISO 19749:2021 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
- 19/30365236 DC BS ISO 13067. Microbeam analysis. Electron backscatter diffraction. Measurement of average grain size
- BS EN ISO 21363:2022 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
- BS EN ISO 19749:2023 Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
- BS ISO 21363:2020 Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
- BS EN 2344:2001 Aerospace series - Round bars, machined in heat resisting alloys - Diameter 10 mm D 180 mm - Dimensions
- 21/30432167 DC BS EN 12012-4 AMD1. Plastics and rubber machines. Size reduction machines. Part 4. Safety requirements for agglomerators
- BS EN 62231-1:2016 Composite station post insulators for substations with AC voltages greater than 1 000 V up to 245 kV. Dimensional, mechanical and electrical characteristics
- BS 5S 21:1964 Specification for aircraft material - '20' carbon steel (suitable for welding) (25/35 tonf/sq in: maximum size 6 inches diameter or minor sectional dimension)
- BS EN ISO 1307:2008 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
- 18/30351714 DC BS ISO 21363. Nanotechnologies. Measurements of particle size and shape distributions by transmission electron microscopy
- 18/30351679 DC BS ISO 19749. Nanotechnologies. Measurements of particle size and shape distributions by scanning electron microscopy
- BS EN 60297-3-107:2012 Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series. Dimensions of subracks and plug-in units, small form factor
- BS IEC 62899-301-1:2017 Printed electronics - Equipment. Contact printing. Rigid master. Measurement method of plate master external dimension
- BS IEC 62899-301-2:2017 Printed electronics - Equipment. Contact printing. Rigid master. Measurement method of plate master pattern dimension
- BS 7S 1:1964 Specification for aircraft material - Carbon steel bright bars for machining (35/45 tonf/sq in; maximum size, 4 inches diameter or minor sectional dimension)
- BS EN 61466-2:1999+A2:2018 Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V - Dimensional and electrical characteristics
- PD CEN ISO/TS 19590:2019 Nanotechnologies. Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
VE-FONDONORMA, particle size
Association Francaise de Normalisation, particle size
- NF X34-214-1*NF EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1 : screen method for small dimension particles
- NF U44-313*NF EN 15238:2007 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm.
- NF X34-214-2*NF EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2 : maximum projected length method (manual) for large dimension particles.
- NF X34-214-3*NF EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3 : method by image analysis for large dimension particles
- XP T16-401*XP CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
- NF EN ISO 19749:2023 Nanotechnologies - Détermination de la distribution de taille et de forme des particules par microscopie électronique à balayage
- NF EN ISO 21363:2022 Nanotechnologies - Détermination de la distribution de taille et de forme des particules par microscopie électronique à transmission
- NF EN 60297-3-107:2012 Structures mécaniques pour équipements électroniques - Dimensions des structures mécaniques de la série 482,6 mm (19 pouces) - Partie 3-107 : dimensions des bacs et blocs enfichables de petit facteur de forme
- NF EN ISO 1307:2008 Tuyaux en caoutchouc et en plastique - Dimensions des tuyaux, diamètres intérieurs minimaux et maximaux, et tolérances sur la longueur de coupe
- NF L12-811*NF EN 4059:2001 Aerospace series - Filler rods and filler wires for welding in steel - Diameter 0,5 mm inférior or equal D inférior or equal 5,0 mm - Dimensions
- NF EN 60719:1994 Calcul des valeurs minimales et maximales des dimensions extérieures moyennes des conducteurs et câbles à âmes circulaires en cuivre et de tension nominale au plus égale à 450/750 V
- NF C93-464-3-107*NF EN 60297-3-107:2012 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-107 : dimensions of subracks and plug-in units, small form factor
- NF L15-132*NF EN 2338:2002 Aerospace series - Sheets, hold rolled in titanium alloys - Thickness a more than or equal to 0,2 mm and less than or equal to 6 mm - Dimensions
YU-JUS, particle size
- JUS N.R1.040-1977 Electronic tubes. 10-pins miniature base.dimensions
- JUS U.A9.009-1985 Modular coordination. Series of preferred multimodularsizes for horizonta/ dimenslons
- JUS B.H8.373-1977 Method of analysis of coaland coke. Ste analysis of small coke (nomirml top size 20 mm or less)
RU-GOST R, particle size
- GOST 18318-1994 Metallic powders. Determination of particle size by dry sieving
- GOST 18318-1973 Metal powders. Method of sieve analysis
- GOST R 55566-2013 Solid recovered fuels. Determination of particle size distribution. Part 1. Screen method for small dimension particles
- GOST 22359-1993 Chairs for school halls. Types and functional dimensions
- GOST 22359-1986 Chairs for school concert halls. Types and functional sizes
- GOST R 55549-2013 Solid recovered fuels. Determination of particle size distribution. Part 2. Maximum projected length method (manual) for large dimension particles
- GOST R 55552-2013 Solid recovered fuels. Determination of particle size distribution. Part 3. Method by image analysis for large dimension particles
- GOST 26278-1984 Charged-particle accelerators for industry applications. Types and basic parameters
- GOST R 50921-2005 Coal coke with size of pieces 20 mm and more. Method of strength determination after reaction with carbon dioxide
- GOST 22813-1983 Assembly units and pipeline parts. Reducing flanges for Pnom 9,81-98,1 MPa (100-1000 kgf/sm sq). Construction and dimensions
- GOST R 50921-1996 Coal coke with size of pieces 20 mm and more. Method of determination of strength after reaction with dioxid carbon
- GOST 13496.8-1972 Mixed feeds. Methods for the determination of size of crushed particle and the content of uncrushed seed of cultured and wild plants
International Electrotechnical Commission (IEC), particle size
- IEC 60970:2007 Insulating liquids - Methods for counting and sizing particles
- IEC 60297-3-107:2012 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-107: Dimensions of subracks and plug-in units, small form factor
Professional Standard - Ferrous Metallurgy, particle size
- YB/T 4290-2012 Determination method of the largest grain size grade (ALA grain size) on the metallographic inspection surface
PT-IPQ, particle size
Taiwan Provincial Standard of the People's Republic of China, particle size
- CNS 10037-1983 Method of Test for Particle-Size Distribution of Space-Insecticide Aerosol
US-FCR, particle size
- FCR NE-F-3-41T-1981 IN-PLACE TESTING OF HEPA FILTER SYSTEMS BY THE SINGLE-PARTICLE, PARTICLE-SIZE SPECTROMETER METHOD
Standard Association of Australia （SAA）, particle size
- AS 1141.20.1:2000 Methods for sampling and testing aggregates - Average least dimension - Direct measurement (nominal size 10 mm and greater)
- AS 1141.20.2:2000 Methods for sampling and testing aggregates - Average least dimension - Direct measurement (nominal sizes 5 mm and 7 mm)
- AS 4762:2000 General-purpose flat pallets - Principal dimensions and tolerances (International pallet sizes)
Defense Logistics Agency, particle size
Japanese Industrial Standards Committee (JISC), particle size
- JIS Z 8822:1990 Determination of particle size distribution by the weight of sedimentation in liquid
- JIS Z 8822:1999 Determination of particle size distribution by the weight of sedimentation in liquid
- JIS Z 8821:1990 Determination of particle size distribution by the sedimentation in liquid using the pipette apparatus
- JIS C 8702-2:2003 Small-sized valve regulated lead-acid batteries -- Part 2: Dimensions, terminals and marking
- JIS R 1629:1997 Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
- JIS C 8702-2:2009 Small-sized valve regulated lead-acid batteries -- Part 2: Dimensions, terminals and marking
PK-PSQCA, particle size
- PS 1640-1984 METHOD FOR COKE (NOMINAL TOP SIZE GREATER THAN 20MM) SIZE ANALYSIS
Professional Standard - Chemical Industry, particle size
- HG/T 2347.7-1992 Determination of particle size in γ·Fe(index 2)O(index 3)magnetic powder
Zhejiang Provincial Standard of the People's Republic of China, particle size
Lithuanian Standards Office , particle size
- LST EN 15415-2-2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
- LST EN 15415-1-2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
- LST EN 15415-3-2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
- LST EN 481-2001 Workplace atmospheres - Size fraction definitions for measurement of airborne particles
- LST EN 60297-3-107-2012 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series -- Part 3-107: Dimensions of subracks and plug-in units, small form factor (IEC 60297-3-107:2012)
- LST EN ISO 1307:2008 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006)
Danish Standards Foundation, particle size
- DS/EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
- DS/EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
- DS/EN 60297-3-107:2012 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-107: Dimensions of subracks and plug-in units, small form factor
- DS/EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
- DS/EN ISO 1307:2008 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
AENOR, particle size
- UNE-EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
- UNE-EN 15415-1:2012 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
- UNE-EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
- UNE 7295:1976 DETERMINATION OF CONTENT, MAXIMUM SIZE AND THICK AGGREGATE GRANULOMETRIC MODULUS IN FRESH CONCRETE.
- UNE-EN ISO 1307:2008 Rubber and plastics hoses - Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses (ISO 1307:2006)
SAE - SAE International, particle size
- SAE AS22520/7-2017 CRIMPING TOOLS@ TYPE 1@ TERMINAL@ HAND@ WIRE TERMINATION FOR WIRE BARREL SIZES 16@ AND SMALLER
- SAE AMS2552A-1990 CLEANING@ PACKAGING@ AND ASSEMBLY OF CRITICAL SYSTEM COMPONENTS CLEAN ROOM PROCEDURE@ 500 MICRON MAX PARTICLE SIZE
- SAE AMS2553A-1992 CLEANING@ PACKAGING@ AND ASSEMBLY OF CRITICAL SYSTEM COMPONENTS CLEAN AREA PROCEDURE@ 2500 MICRON MAX PARTICLE SIZE
European Committee for Electrotechnical Standardization（CENELEC）, particle size
- EN 60297-3-107:2012 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-107: Dimensions of subracks and plug-in units, small form factor
- EN 60970:2007 Insulating liquids - Methods for counting and sizing particles (Incorporating corrigendum January 2008)
ES-UNE, particle size
- UNE-EN 60297-3-107:2012 Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-107: Dimensions of subracks and plug-in units, small form factor (Endorsed by AENOR in June of 2012.)
- UNE 146406:2018 Determination of content, maximum size and thick aggregate granulometric modulus in fresh concrete.
- UNE-EN ISO 21363:2022 Nanotechnologies - Measurements of particle size and shape distributions by transmission electron microscopy (ISO 21363:2020) (Endorsed by Asociación Española de Normalización in February of 2022.)
- UNE-EN ISO 19749:2023 Nanotechnologies - Measurements of particle size and shape distributions by scanning electron microscopy (ISO 19749:2021) (Endorsed by Asociación Española de Normalización in May of 2023.)
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, particle size
- GB/T 33714-2017 Nanotechnology—Test method for size of nanoparticles—Atomic force microscopy
BE-NBN, particle size
European Association of Aerospace Industries, particle size
- AECMA PREN 4115-1998 Aerospace Series Cushion, Rubber for Clamps Dimensions, Massess Edition P 1
- AECMA PREN 2616-1986 Aerospace Series Wire for Rivets in Aluminium and Aluminium Alloys Large Tolerances D Less Than or Equal to 10 mm Dimensions Issue P 1
未注明发布机构, particle size
- DIN EN ISO 21363:2022 Nanotechnologies – measurements of particle size and particle shape distributions using transmission electron microscopy
AT-ON, particle size
- ONORM S 3008-1984 Catering equipment for large kitchens; receptacles (baskets) for dishes; dimensions
Group Standards of the People's Republic of China, particle size
- T/CECS 1044-2022 Technical standards for large-scale 3D printing of polymer composite materials
Aerospace Industries Association, particle size
Aerospace Industries Association/ANSI Aerospace Standards, particle size
ESDU - Engineering Sciences Data Unit, particle size
IT-UNI, particle size
ANSI - American National Standards Institute, particle size
- B151.11-1982 Plastics Machinery - Granulators@ Pelletizers@ and Dicers Used for Size Reduction of Plastics - Construction@ Care@ and Use (SPI)
KR-KS, particle size
- KS C ISO 19749-2023 Nanotechnologies — Measurements of particle size and shape distributions by scanning electron microscopy
- KS C ISO 21363-2023 Nanotechnologies — Measurements of particle size and shape distributions by transmission electron microscopy
- KS M ISO 8220-2003(2023)
- KS M ISO 1307-2018 Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
CEN - European Committee for Standardization, particle size
- CEN ISO/TS 19590:2019 Nanotechnologies - Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry
- EN 12012-1:2018 Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for blade granulators and shredders
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), particle size
- ASHRAE 4674-2004 An Algorithm of Stereoscopic Particle Image Velocimetry for Full-Scale Room Airflow Studies
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., particle size
- ASHRAE CI-01-1-2-2001 Measurement of Two-Dimensional Air Velocities in a Full-Scale Room Using Particle Image Velocimetry
国家市场监督管理总局、中国国家标准化管理委员会, particle size
- GB/T 19520.19-2020 Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-107: Dimensions of subracks and plug-in units, small form factor
US-CFR-file, particle size
- CFR 13-121.512-2014 Business credit and assistance. Part121:Small business size regulations. SubpartA:Size eligibility provisions and standards. Section121.512:What is the size standard for stockpile purchases?
- CFR 13-121.301-2014 Business credit and assistance. Part121:Small business size regulations. SubpartA:Size eligibility provisions and standards. Section121.301:What size standards are applicable to financial assistance programs?
American National Standards Institute （ANSI), particle size
- ANSI/ASTM F2994:2013 Practice for the Installation of a Single-Sized Cured-In-Place Liner for Manholes of Various Shapes and Sizes
TH-TISI, particle size
- TIS 761.5-7-1991 Standard for modular coordination.part 5: principles and rules.part 6 series of preferred multimodular sizes for horizontal dimensions.part 7 sub-modular increments