ZH
RU
ES

extensometer straight line

extensometer straight line, Total:498 items.

In the international standard classification, extensometer straight line involves: Cereals, pulses and derived products, Electric traction equipment, Testing of metals, Graphic technology, Chipless working equipment, Plant and equipment for the food industry, Wind turbine systems and other alternative sources of energy, Paper and board, Electrical wires and cables, Wood, sawlogs and sawn timber, Plastics, Products of the textile industry, Sacks. Bags, Structures of buildings, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Materials for the reinforcement of composites, Mechanical testing, Wood-based panels, Materials for aerospace construction, Rubber and plastics products, Audio, video and audiovisual engineering, Construction materials, Medical equipment, Linear and angular measurements, Springs, Food products in general, Sports equipment and facilities, Non-textile floor coverings, Products of non-ferrous metals, Road engineering, Iron and steel products, Corrosion of metals, Waxes, bituminous materials and other petroleum products, Electrical accessories, Road vehicles in general, Surface treatment and coating, Rubber, Power transmission and distribution networks, Adhesives, Fruits. Vegetables, Electricity. Magnetism. Electrical and magnetic measurements, Conducting materials, Components and accessories for telecommunications equipment, Geology. Meteorology. Hydrology, Aerospace electric equipment and systems, Reinforced plastics.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, extensometer straight line

GB/T 14615-1993 Method for determination of rheological properties ofdoughs using an extensograph
GB/T 32108-2015 Test methods of tensile properties for dipped yarns and cords
GB/T 30311-2013 Test method for tensile properties of dipped aramid yarns and cords
GB/T 14615-2006 Wheat flour.Physical characteristics of doughs.Determination of rheological properties using an extensograph
GB/T 31527-2015 Mechanical properties measurement.Room temperature tensile test of NbTi/Cu composite superconductors
GB/T 21699-2008 Verification/calibration method of rotatingmelement current meters in straight open tank

Indonesia Standards, extensometer straight line

SNI 04-3866-1995 Rules for pantographs of electric rolling stocks
SNI 03-6836-2002 Test method of resilient modulus for asphalt mixture by indirect tensile

Japanese Industrial Standards Committee (JISC), extensometer straight line

JIS B 7741:1991 Extensometers used in metallic material tensile testing
JIS B 2704-3:2009 Coil springs -- Part 3: Expression of the specification on helical extension springs
JIS B 2704-1:2009 Coil springs -- Part 1: Basic calculation methods on helical compression and extension springs

Group Standards of the People's Republic of China, extensometer straight line

T/QGCML 1801-2023
T/ZZB 2659-2022 Motor direct drive copper wire drawing machine

工业和信息化部/国家能源局, extensometer straight line

JB/T 13123-2017 Aluminum profile stretch straightening machine
JB/T 12939-2016 Strip stretch bending straightening machine

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, extensometer straight line

GB/T 35994-2018 Grain and oil machinery -Extensograph

BE-NBN, extensometer straight line

RO-ASRO, extensometer straight line

STAS 9869/3-1974 RUBBER THREADS Tensile test
STAS 7391/1-1974 Tolerances of form and of position TOLERANGES OF STRAIGHTNESS, OF FLATNESS AND OF PROFIL OF ANY LINE AND OF PROFIL OF ANY SURFACE
STAS 9869/4-1975 RUBBER THREADS Determination of the stress at pre-determined elongations
STAS 1369-1990 Cotton and drawn polyesteric filament yarns thread for leather garments
STAS 6605-1978 Tests of metals TENSILE TESTING OF REINFORCED STEEL, WIRE AND WIRE PRODUCTS FOR PRESTRESSED CONCRETE

American National Standards Institute （ANSI), extensometer straight line

ANSI/TAPPI T494 om-2013 Tensile properties of paper and paperboard (using constant rate of elongation apparatus)
ANSI/ASTM E1012:1999 Practice for Verification of Specimen Alignment Under Tensile Loading

HU-MSZT, extensometer straight line

VN-TCVN, extensometer straight line

TCVN 1824-1993 Wire tensile test method
TCVN 5240-1990 Sewing thread.Method for determination of loop breaking tensile load
TCVN 5241-1990 Sewing thread.Method for determination of diameter on thickness tester
TCVN 7848-2-2015 Wheat flour - Physical characteristics of doughs .Part 2:Determination of rheological properties using an extensograph
TCVN 7756-7-2007 Wood based panels.Test methods.Part 7: Determination of tensile strength perpendicular to the plane of the board
TCVN 2020-1977 Cylindrical helical compression(tension)springs of Ⅰ class and of 1 category made of round steel.Main parameters of coils
TCVN 2021-1977 Cylindrical helical compression(tension)springs of Ⅰ class and of 2 category made of round steel.Main parameters of coils
TCVN 2022-1977 Cylindrical helical compression(tension)springs of Ⅰ class and of 3 category made of round steel.Main parameters of coils
TCVN 2023-1977 Cylindrical helical compression(tension)springs of Ⅰ class and of 4 category made of round steel.Main parameters of coils
TCVN 2024-1977 Cylindrical helical compression(tension)springs of Ⅱ class and of 1 category made of round steel.Main parameters of coils
TCVN 2025-1977 Cylindrical helical compression(tension)springs of Ⅱ class and of 2 category made of round steel.Main parameters of coils

SE-SIS, extensometer straight line

SIS 65 00 08-1949
SIS 65 00 39-1957
SIS SS 11 21 39-1987 Aliuminium and steel - Stranded con- uctors for overhead lines - Tensile esting for the determination of the odulus of elasticity
SIS SS 11 21 39-1984 Aluminium. Steel — Stranded conductors for overhead lines — Tensile testing or the determination of Young's modulus
SIS 11 21 20 E-1963 Dragprovstavar typ K
SIS SS 11 21 20-1986 Metallic materials — Tensile test pieces from wire and bar with a diameter less than or equal to 6 mm — Test pieces type K

RU-GOST R, extensometer straight line

GOST 15634.1-1970 Magnet wire. Method of the elongation test
GOST 14340.9-1969 Enamelled round winding wires. Method of the elongation test
GOST 28890-1990 Textile threads. Methods for determination of shares of total elongation under tension by load which is less breaking
GOST EN 1607-2011 Thermal insulating products for building applications. Method for determination of tensile strength perpendicular to faces
GOST R EN 1607-2008 Thermal insulating products for building applications. Method for determination of tensile strength perpendicular to faces
GOST 34256-2017 Plastics. Determination of propagation of fatigue crack in tension by the method of linear elastic fracture mechanics (LEFM)

CZ-CSN, extensometer straight line

CSN 80 0700-1984 Testing of single thread tensile strength and elongation
CSN ON 49 0191-1967 Tensile strenght perpendicularly to the surface o? honeycombed board.
CSN 49 0151-1983 Fiberboards. Determination of tension strength perpendicular to the plane of tne panel
CSN ON 49 0192-1967 Tensile strenght perpendicularly to the surface of honeycombed board mantle.
CSN 15 3153-1963 Knitted wire netting with meshes square in shape and with stretching wire. Dimensions
CSN 02 4308-1983 Steel ropos. Seven-wire strands for pre-stressed concrete. Tensile test
CSN 49 0151-1975 Testing of physioal and mechanical pro- pertiea of hardboarda and ehipboards. Tensile strenght perpendicular to board plane

Association Francaise de Normalisation, extensometer straight line

NF B51-010:1942 Wood. Tensile test perpendicular to fibres.
NF B51-010:2019 Wood - Tensile test perpendicular to fibres
NF T54-603:1983 Structures sandwich à base de plastiques - Essai de traction perpendiculaire
NF R15-515:1995 Road vehicules. Apparatus for belt measurement and tensioning. Test method.
NF EN ISO 10618:2005 Fibres de carbone - Détermination des propriétés en traction sur fils imprégnés de résine
NF L17-452:1988 Aerospace. Fabric pre-impregnated with thermosetting resin. Perpendicular tensile resistance test.
NF EN 319:1993 Panneaux de particules et panneaux de fibres - Détermination de la résistance à la traction perpendiculaire aux faces du panneau
NF EN 1607:2013 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la résistance à la traction perpendiculairement aux faces
NF B51-250*NF EN 319:1993 Particleboards and fibreboards. Determination of tensile strength perpendicular to the plane of the board.
NF G07-002:1981 Textiles. Yarn tests. Determination of the breaking load and elongation at breaking load (tests on individual strands) Simplified method.
NF S94-167-2:2014 Implants for surgery - Artificial ligaments - Part 2 : mechanical characterization - Determination of direct tensile strength and elongation (method A), determination of indirect tensile strength and elongation (method B) and residual elongation (method C
NF P85-528:2003 Sealants - Determination of adhesive and cohesive force by tensile strength test until rupture after thermal treatment
NF P18-511-4*NF EN 14488-4+A1:2008 Testing sprayed concrete - Part 4 : bond strength of cores by direct tension
NF P98-260-1:2000 Test relating to pavements - Measurements of rheological properties on bituminous mixtures - Part 1 : determination of the modulus and of the lost linearity under direct traction (tensile test).
NF P18-511-4/IN1*NF EN 14488-4/IN1:2008 Testing sprayed concrete - Part 4 : bond strength of cores by direct tension
NF EN ISO 2062:2010 Textiles - Fils sur enroulements - Détermination de la force de rupture et de l'allongement à la rupture des fils individuels à l'aide d'un appareil d'essai à vitesse constante d'allongement
NF ISO 5893:2020 Appareils d'essai du caoutchouc et des plastiques - Types pour traction, flexion et compression (vitesse de translation constante) - Spécifications
NF L17-780:1992 Aerospace series. Rowings. Measurement of the equitension of the base strands.
NF V03-717-2*NF EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2 : determination of rheological properties using a extensograph
XP S94-167-2-1998 Implants for surgery. Artificial ligaments. Part 2 : mechanical characterization. Determination of direct tensile strength and elongation (method A), determination of indirect tensile strength and elongation (method B) and residual elongation (method C)
NF EN ISO 5530-2:2015 Farines de blé tendre - Caractéristiques physiques des pâtes - Partie 2 : détermination des caractéristiques rhéologiques au moyen de l'extensographe
NF C31-888-25*NF EN IEC 61788-25:2018 Superconductivity - Part 25 : mechanical properties measurement - Room Temperature Tensile Test on REBCO Wires
NF ISO 5893/A1:2020 Appareils d'essai du caoutchouc et des plastiques - Types pour traction, flexion et compression (vitesse de translation constante) - Spécifications - AMENDEMENT 1
NF EN IEC 61788-25:2018 Supraconductivité - Partie 25 : mesure des propriétés mécaniques - Essai de traction à température ambiante des fils REBCO
NF L52-250-505*NF EN 3475-505:2012 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505 : tensile test on conductors and strands.
NF P98-260-1:1992 TEST RELATING TO PAVEMENTS. MEASUREMENT OF RHEOLOGICAL PROPERTIES ON BITUMINOUS MIXTURES. PART 1 : DETERMINATION OF MODULUS AND NON-LINEARITY BEHAVIOUR USING TENSILE TEST.
NF EN 2597:1998 Série aérospatiale - Plastiques renforcés de fibres de carbone. Stratifiés unidirectionnels - Essai de traction perpendiculairement à la direction des fibres.
NF L52-252-401*NF EN 4057-401:2007 Aerospace series - Cable ties for harnesses - Test methods - Part 401 : loop tensile strength
NF L17-409*NF EN 2597:1998 Aerospace series. Carbon fibre reinforced plastics. Unidirectional laminates. Tensile test perpendicular to the fibre direction.

AT-ON, extensometer straight line

ONORM B 3124 Teil.3-1981 Testing of natural stone; Mechanical properties of rock; Uniaxial tensile strength (direct tension test)
ONORM EN 319-1993 Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board

ES-AENOR, extensometer straight line

UNE 7-326-1988

International Organization for Standardization (ISO), extensometer straight line

ISO 15850:2014 Plastics - Determination of tension-tension fatigue crack propagation - Linear elastic fracture mechanics (LEFM) approach
ISO/R 402:1964 Tensile testing of copper and copper alloy wire
ISO 16984:2003 Wood-based panels - Determination of tensile strength perpendicular to the plane of the panel
ISO 29765:2008 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
ISO 527-1:1993/Amd 1:2005 Plastics - Determination of tensile properties - Part 1: General principles; Amendment 1: Details of extensometer
ISO/R 956:1969 Tensile test for light metal and light metal alloy wires
ISO 22183:2023 Plastics — Validation of force-time curves obtained from high-speed tensile tests
ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO 4637:1979 Rubber-coated fabrics; Determination of rubber-to-fabric adhesion; Direct tension method
ISO 3492:1982 Wrought copper and copper alloys; Drawn round wire; Tolerances on diameter
ISO 5530-2:2020 Wheat flour — Physical characteristics of doughs — Part 2: Determination of rheological properties using an extensograph
ISO/CD 12834 Textiles --Synthetic filament yarns--Determination of dynamic thermal drawing force of partially oriented yarns (POY)
ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph

Professional Standard - Military and Civilian Products, extensometer straight line

WJ 744-1994 Test method for tensile strength of adhesives for optical instruments

Institute of Interconnecting and Packaging Electronic Circuits (IPC), extensometer straight line

IPC TM-650 2.4.19-1998 Tensile Strength and Elongation, Flexible Printed Wiring Materials Revision C

IPC - Association Connecting Electronics Industries, extensometer straight line

IPC TM-650 2.4.19C-1998 Tensile Strength and Elongation@ Flexible Printed Wiring Materials
IPC TM-650 2.4.19B-1988 Tensile Strength and Elongation@ Flexible Printed Wiring Materials

German Institute for Standardization, extensometer straight line

DIN 53292:1982-02 Testing of sandwiches; Tensile test perpendicular to the faces
DIN 53843-1:1992-11 Testing of textiles; loop tensile test; yarns
DIN 24500-7:1971-04 Rolling mill equipment; rolling mills for steel, designations for equipment for straightening and stretching
DIN 53843-1:1992 Testing of textiles; loop tensile test; yarns
DIN 24500-7:1971 Rolling mill equipment; rolling mills for steel, designations for equipment for straightening and stretching
DIN EN 13864:2004-09 Surfaces for sports areas - Determination of tensile strength of synthetic yarns; German version EN 13864:2004
DIN 2097:1973-05 Helical Springs Made of Round Wire; Quality Specifications for Cold Coiled Tension Springs
DIN EN 1607:2013-05 Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces; German version EN 1607:2013
DIN EN 319:1993-08 Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board; German version EN 319:1993
DIN EN 14488-4:2008-08 Testing sprayed concrete - Part 4: Bond strength of cores by direct tension; German version EN 14488-4:2005+A1:2008
DIN 53835-2:2023-07 Testing of textiles - Testing of the tenso-elastic behaviour - Part 2: Single and plied elastomeric yarns, repeated application of tensile load between constant extension limits / Note: Date of issue 2023-06-02*Intended as replacement for DIN 53835-2 (...
DIN 53835-3:1981 Testing of textiles; determination of the elastic behaviour of single and plied yarns by a single application of tensile load between constant extension limits
DIN 53835-2:1981 Testing of textiles; determination of the elastic behaviour of single and plied elastomeric yarns by repeated application of tensile load between constant extension limits
DIN 51214:2009-08 Testing of Steel - Tensile test for round wires using knotted specimens
DIN EN ISO 5530-2:2020-06 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020 / Note: Date of issue 2020-05-08*Intended as replacement for...
DIN EN ISO 5530-2:2015-03 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012); German version EN ISO 5530-2:2014 / Note: To be replaced by DIN EN ISO 5530-2 (2020-06).
DIN EN 14488-4:2005 Testing sprayed concrete - Part 4: Bond strength of cores by direct tension; English version of DIN EN 14488-4
DIN 2097:1973 Helical Springs Made of Round Wire; Quality Specifications for Cold Coiled Tension Springs
DIN EN 4057-401:2008-02 Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile strength; German and English version EN 4057-401:2006 / Note: Applies in conjunction with DIN EN 4057-100 (2008-02).
DIN EN 3475-505:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands; German and English version EN 3475-505:2007
DIN EN 3475-505:2012 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands; German and English version EN 3475-505:2012
DIN EN ISO 2062:2010-04 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester (ISO 2062:2009); German version EN ISO 2062:2009
DIN EN ISO 5530-2:2020 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020
DIN 53829-1:2014 Testing of textiles - Determination of the evenness of filament yarns - Part 1: Testing of the force and extension on the running yarn, principles
DIN EN 15416-1:2017-05 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 1: Long-term tension load test perpendicular to the bond line at varying climate conditions with specimens perpendicular to the glue line (Glass hou...
DIN 65378:1989 Aerospace; fiber reinforced plastics; testing of unidirectional laminates; tensile test transverse to fiber direction

The American Road & Transportation Builders Association, extensometer straight line

AASHTO TP 88-2010 Standard Method of Test for Evaluation of the Low-Temperature Tensile Property of Bituminous Sealants by Direct Tension Test
AASHTO TP 107-2014 Standard Method of Test for Determining the Damage Characteristic Curve of Asphalt Mixtures from Direct Tension Cyclic Fatigue Tests
AASHTO T 314-2012 Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
AASHTO T 314-2007 Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

AASHTO - American Association of State Highway and Transportation Officials, extensometer straight line

TP 88-2010 Standard Method of Test for Evaluation of the Low-Temperature Tensile Property of Bituminous Sealants by Direct Tension Test
T 369-2017 Standard Method of Test for Evaluation of the Low-Temperature Tensile Property of Hot-Poured Asphalt Crack Sealant by Direct Tension Test
DIVISION I 8.25-1996 Development of Deformed Bars and Deformed Wire in Tension
TP 107-2014 Standard Method of Test for Determining the Damage Characteristic Curve of Asphalt Mixtures from Direct Tension Cyclic Fatigue Tests
T 314-2012 Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
T 314-2006 Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
T 314-2007 Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
TP3-1998 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
TP3-1996 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
T 314-2002 Standard Method of Test for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
TP3-2000 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (2000 Edition)
TP3-1993 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (Edition 1B)

American Society for Testing and Materials (ASTM), extensometer straight line

ASTM D2653-01 Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D2653-07(2012) Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM C1583/C1583M-20 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
ASTM D4964-96(2008)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D2653-07 Standard Test Method for Tensile Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D828-22 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
ASTM G49-85(2005) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM C1860-22 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23c Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM D726-94(1999) Standard Test Method for Resistance of Nonporous Paper to Passage of Air
ASTM D7269-08 Standard Test Methods for Tensile Testing of Aramid Yarns
ASTM D7269/D7269M-11 Standard Test Methods for Tensile Testing of Aramid Yarns
ASTM D7269/D7269M-20 Standard Test Methods for Tensile Testing of Aramid Yarns
ASTM D7269/D7269M-17 Standard Test Methods for Tensile Testing of Aramid Yarns
ASTM E1012-99 Standard Practice for Verification of Specimen Alignment Under Tensile Loading
ASTM A931-96 Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM A931-96(2002) Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM D7269-07 Standard Test Methods for Tensile Testing of Aramid Yarns
ASTM A931-96(2008) Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM A931-08 Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM A931-08(2013) Standard Test Method for Tension Testing of Wire Ropes and Strand
ASTM G49-85(2000) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM G49-85(2011) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM G49-85(2019) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM D5083-10 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D2256-02(2008) Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D2256/D2256M-21 Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM D5083-10e1 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM F459-84(2001) Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
ASTM F459-84(1995)e1 Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
ASTM F459-13 Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
ASTM F459-13(2018) Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds
ASTM D2256/D2256M-10(2015) Standard Test Method for Tensile Properties of Yarns by the Single-Strand Method
ASTM C1860-19a Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-21 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-19 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-18 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-20 Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM C1860-23a Standard Test Methods for Measurement of Tensile Strength or Bond Strength of Portland Cement-Based Plaster by Direct Tension
ASTM D5083-02 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5083-96 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5083-08 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D6723-01 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
ASTM D6723-02 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
ASTM D6723-12 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
ASTM D5083-17 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5179-16(2021) Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D2731-21 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D2731-07(2012) Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D5179-16 Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D2731-07 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D2731-15 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM A1031/A1031M-10 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
ASTM B986-13 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
ASTM B986-13e1 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application
ASTM D2343-17 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

AENOR, extensometer straight line

UNE 7326:1988 TENSILE TEST FOR STEEL WIRE-ROPES AND STRANDS.
UNE-EN 13864:2006 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
UNE-EN ISO 10618:2005 Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004)
UNE-EN 14488-4:2006+A1:2008 Testing sprayed concrete - Part 4: Bond strength of cores by direct tension
UNE-EN 2597:1999 AEROSPACE SERIES. CARBON FIBRE REINFORCED PLASTICS. UNIDIRECTIONAL LAMINATES. TENSILE TEST PERPENDICULAR TO THE FIBRE DIRECTION.
UNE-EN ISO 5530-2:2015 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012)
UNE-EN ISO 2062:2010 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester (ISO 2062:2009)

KR-KS, extensometer straight line

KS T 1015-2012(2022) Polyolefine stretched flat yarn for woven bags
KS B 3285-2003(2023)
KS L ISO 10618-2018 Carbon fibre — Determination of tensile properties of resin-impregnated yarn
KS M ISO 15850-2017 Plastics－Determination of tension-tension fatigue crack propagation－Linear elastic fracture mechanics(LEFM) approach
KS K ISO 2062-2019 Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension(CRE) tester

Professional Standard - Chemical Industry, extensometer straight line

HG/T 3243-1987 Technical specifications of tensile stress relaxometer of vulcanized rubber
HG/T 3243-2005 Technical specifications for tensile stress relax meter of vulcanized rubber

National Metrological Technical Specifications of the People's Republic of China, extensometer straight line

JJF(石化)018-2019 Calibration specification for rubber tensile and cold resistance coefficient tester
JJF 1890-2021 Calibration Specification for Straightness Measuring Devices
JJF(机械) 1035-2019 Calibration specification for tapered roller diameter angle linearity measuring instrument
JJF(机械)1035-2019 Calibration specification for tapered roller diameter angle linearity measuring instrument
JJF 1684-2017 Calibration Specification for Comparators for Measuring the Diameter,Angle and Straightness of Bearings'Tapered Roller

国家发展和改革委员会, extensometer straight line

HG/T 3243-2006 Technical conditions for vulcanized rubber tensile stress relaxation instrument

Korean Agency for Technology and Standards (KATS), extensometer straight line

KS K 0412-2016(2021) Test method for tensile strength and elongation of filament yarn
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS L ISO 10618:2018 Carbon fibre — Determination of tensile properties of resin-impregnated yarn
KS M ISO 4637-2009(2019) Rubber-coated fabrics－Determination of rubber-to-fabric adhesion－Direct tension method
KS D 0072-1993 Method of fixed temperature tensile test for wires of Ti-Ni shape memory alloys
KS D 0072-2002(2017) Method of fixed temperature tensile test for wires of Ti－Ni shape memory alloys
KS M ISO 4637:2009 Rubber-coated fabrics－Determination of rubber-to-fabric adhesion－Direct tension method
KS D 0072-2002(2022) Method of fixed temperature tensile test for wires of Ti－Ni shape memory alloys
KS M ISO 15850-2017(2022) Plastics－Determination of tension-tension fatigue crack propagation－Linear elastic fracture mechanics(LEFM) approach
KS K ISO 2062:2019 Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension(CRE) tester

Society of Automotive Engineers (SAE), extensometer straight line

SAE AMS4164H-2013 Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Stress-Relief Stretched, Unstraightened
SAE AMS4164D-1968 ALUMINUM ALLOY EXTRUSIONS 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Stress-Relief Stretched, Unstraightened
SAE AMS4164C-1964 ALUMINUM ALLOY EXTRUSIONS 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Stress-Relief Stretched, Unstraightened
SAE AMS4164E-1978 ALUMINUM ALLOY EXTRUSIONS 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Stress-Relief Stretched, Unstraightened
SAE AMS4164H-2003 Aluminum Alloy, Extrusions 4.4Cu 1.5Mg 0.60Mn (2024-T3510) Stress-Relief Stretched, Unstraightened
SAE AMS4162-1968 ALUMINUM, ALLOY EXTRUSIONS 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Stress Relief Stretched and Straightened
SAE AMS3892/3B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
SAE AMS3892/4B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS3892/2B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength, 50 (345) Tensile Modulus
SAE AMS3892/1B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/5B-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 220 (1517) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS3892/6A-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength, 57 (393) Tensile Modulus
SAE AMS4165-1960 ALUMINUM ALLOY EXTRUSIONS 4.5Cu - 1.5Mg - 0.6Mn (2024-T3511) Stress-Relief Stretched and Straightened
SAE AMS5636E-1993 Steel, Corrosion Resistant, Bars and Wire 18Cr 9.0Ni Solution Heat Treated and Cold Drawn, 100 ksi (689 MPa) Tensile Strength
SAE AMS3892/7A-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/8A-2005 Tow or Yarn, Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength, 40 (276) Tensile Modulus
SAE AMS3892/2A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For structural Composites GF 300 (2070) Tensile Strength, 50 (345) Tensile Modulus
SAE AMS3901/3-1992 YARN, ORGANIC FIBER For Structural Composites OY 400,000 (2760) Tensile Strength, 17,500,000 (121) Tensile Modulus 1140 Denier
SAE AMS3892/3A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 400 (2760) Tensile Strength, 40 (275) Tensile Modulus
SAE AMS3892/6-1984 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 325 (2240) Tensile Strength, 57 (395) Tensile Modulus
SAE AMS3892/1A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 400 (2760) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/5A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 220 (1515) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS3901/4-1974 YARN, ORGANIC FIBER For Structural Composites OY 400,000 (2760) Tensile Strength, 17,500,000 (121) Tensile Modulus 1420 Denier
SAE AMS3901/2-1974 YARN, ORGANIC FIBER For Structural Composites OY 400,000 (2760) Tensile Strength, 17,500,000 (121) Tensile Modulus 380 Denier
SAE AMS3901/1-1974 YARN, ORGANIC FIBER For Structural Composites OY 400,000 (2760) Tensile Strength, 17,500,000 (121) Tensile Modulus 195 Denier
SAE AMS3892/4A-2011 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF 300 (2070) Tensile Strength, 75 (517) Tensile Modulus
SAE AMS4164B-1963 ALUMINUM ALLOY EXTRUSIONS 4.4Cu - 1.5Mg - 0.6Mn (2024-T3510) Stress-Relief Stretched, Unstraightened
SAE AMS4165A-1962 ALUMINUM ALLOY EXTRUSIONS 4.4Cu - 1.5Mg - 0.6Mn (2024-T3511) Stress-Relief Stretched and Straightened
SAE AMS4165B-1963 ALUMINUM ALLOY EXTRUSIONS 4.4Cu - 1.5Mg - 0.6Mn (2024-T3511) Stress-Relief Stretched and Straightened
SAE AMS4165C-1964 ALUMINUM ALLOY EXTRUSIONS 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Stress-Relief Stretched and Straightened
SAE AMS4164A-1962 ALUMINUM ALLOY EXTRUSIONS 4.4Cu - 1.5Mg - 0.6Mn (2024-T3510) Stress-Relief Stretched, Unstraightened
SAE AMS4164-1960 ALUMINUM ALLOY EXTRUSIONS 4.5Cu - 1.5Mg - 0.6Mn (2O24-T3510) Stress-Relief Stretched, Unstraightened
SAE AMS4165H-2003 Aluminum Alloy, Extrusions 4.4Cu 1.5Mg 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
SAE AMS5636F-2006 Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 100 ksi (689 MPa) Tensile Strength UNS S30200
SAE AMS3892/7-1984 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF (OX) 400 (2760) Tensile Strength, 33 (228) Tensile Modulus
SAE AMS3892/8-1984 TOW OR YARN, CARBON (GRAPHITE) FIBERS For Structural Composites GF (OX) 400 (2760) Tensile Strength, 40 (275) Tensile Modulus
SAE AMS3901/3A-2011 YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390,000 (2690) Tensile Strength, 16,500,000 (115) Tensile Modulus 1140 Denier, 0.6% Finish
SAE AMS3901/4A-2011 YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390,000 (2690) Tensile Strength, 16,500,000 (115) Tensile Modulus 1420 Denier, 0.6% Finish
SAE AMS3901/11-1985 YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390,000 (2690) Tensile Strength, 16,500,000 (115) Tensile Modulus 1420 Denier, 1.2% Finish
SAE AMS3901/1A-2011 YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390,000 (2690) Tensile Strength, 18,000,000 (125) Tensile Modulus 195 Denier, 0.6% Finish
SAE AMS3901/2A-2011 YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390,000 (2690) Tensile Strength, 17,500,000 (120) Tensile Modulus 380 Denier, 0.6% Finish
SAE AMS3901/8-1985 YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390,000 (2690) Tensile Strength, 18,000,000 (125) Tensile Modulus 195 Denier, 1.2% Finish
SAE AMS3901/10-2011 YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390,000 (2690) Tensile Strength, 16,500,000 (115) Tensile Modulus 1140 Denier, 1.2% Finish
SAE AMS3901/12-2011 YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390,000 (2690) Tensile Strength, 16,500,000 (115) Tensile Modulus 2130 Denier, 1.2% Finish
SAE AMS3901/7-1985 YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390,000 (2690) Tensile Strength, 16,500,000 (115) Tensile Modulus 2130 Denier, 0.6% Finish
SAE AMS3901/9-1985 YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390,000 (2690) Tensile Strength, 17,500,000 (120) Tensile Modulus 380 Denier, 1.2% Finish
SAE AMS4168C-1968 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T6510) Stress-Relief Stretched, Unstraightened
SAE AMS4172A-1980 ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4511) Stress Relief Stretched and Straightened
SAE AMS4169A-1960 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.3Cr (7075-T6511) Stress-Relief Stretched and Straightened
SAE AMS4167-1967 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T73511) Stress-Relief Stretched and Straightened
SAE AMS4168A-1963 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.3Cr (7075-T6510) Stress-Relief Stretched, Unstraightened
SAE AMS4172-1969 ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T4511) Stress Relief Stretched and Straightened
SAE AMS4169F-1979 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Stress-Relief Stretched and Straightened
SAE AMS4168-1960 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.3Cr (7075-T6510) Stress-Relief Stretched, Unstraightened
SAE AMS4169B-1963 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.3Cr (7075-T6511) Stress-Relief Stretched and Straightened
SAE AMS4168D-1978 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Stress-Relief Stretched, Unstraightened
SAE AMS4169-1960 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.3Cr (7075-T6511) Stress-Relief Stretched and Straightened
SAE AMS4169D-1968 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T6511) Stress-Relief Stretched and Straightened
SAE AMS4173-1969 ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511) Stress Relief Stretched and Straightened
SAE AMS4173A-1979 ALUMINUM ALLOY EXTRUSIONS 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511) Stress Relief Stretched and Straightened
SAE AMS4168B-1967 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T6510) Stress-Relief Stretched, Unstraightened
SAE AMS4167E-1979 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73511) Stress-Relief Stretched and Straightened
SAE AMS4167B-1968 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.26Cr (7075-T73511) Stress-Relief Stretched and Straightened
SAE AMS4167A-1967 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T73511) Stress-Relief Stretched and Straightened
SAE AMS4169C-1967 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.30Cr (7075-T6511) Stress-Relief Stretched and Straightened
SAE AMS4167D-1978 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73511) Stress-Relief Stretched and Straightened
SAE AMS4169E-1978 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Stress-Relief Stretched and Straightened
SAE AMS4167C-1970 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.26Cr (7075-T73511) Stress-Relief Stretched and Straightened
SAE AMS3901/7A-1992 YARN, ORGANIC FIBER (PARA-ARAMID), HIGH MODULUS OY 390 (2689)/21.5 Tensile Strength, 16.5 (114)/825 Tensile Modulus 2160 Denier, 0.6% Finish
SAE AMS4165D-1968 ALUMINUM ALLOY EXTRUSIONS 4. 4Cu - 1.5Mg - 0. 60Mn (2024-T3511) Stress-Relief Stretched and Straightened
SAE AMS4163-1968 ALUMINUM ALLOY EXTRUSIONS 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Stress-Relief Stretched and Straightened
SAE AMS5693B-1988 Steel, Corrosion Resistant, Wire 18Cr 9.0Ni Cryogenically Produced, High Tensile Strength (Noncurrent: 01 Apr 1994)
SAE AMS3901/3D-2008 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/2309 Tensile Strength 16.5 (114)/900 Tensile Modulus 1140 Denier, (1270 d tex), 0.6% Finish
SAE AMS4964-2000 Titanium Alloys Bars, Wire, Forgings, and Rings 4.5Al 3V 2Fe 2Mo Annealed
SAE AMS4169G-2011 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated Straightened
SAE AMS4167F-1988 ALUMINUM ALLOY EXTRUSIONS 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated Straightened
SAE AMS3901/9B-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 17.5 (121)/970 Tensile Modulus 380 Denier, (420 d tex), 1.2% Finish
SAE AMS3901/11B-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.8 Tensile Strength, 16.5 (114)/950 Tensile Modulus 1420 (1580 d tex) Denier, 1.2% Finish
SAE AMS3901/12B-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/21.1 Tensile Strength, 16.5 (114)/900 Tensile Modulus 2160 (2400 d tex) Denier, 1.2% Finish
SAE AMS3901/13A-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.0 Tensile Strength, 16.5 (114)/875 Tensile Modulus 2450 (2720 d tex) Denier, 0.6% Finish
SAE AMS3901/14A-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/22.3 Tensile Strength, 16.5 (114)/855 Tensile Modulus 2840 (3160 d tex) Denier, 0.6% Finish
SAE AMS3901/17A-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.5 Tensile Strength, 16.5 (114)/950 Tensile Modulus 720 Denier, (800 d tex), 1.2% Finish
SAE AMS3901/1C-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/22.5 Tensile Strength, 18 (124)/1010 Tensile Modulus 195 (215 d tex) Denier, 0.6% Finish
SAE AMS3901/2C-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.8 Tensile Strength, 17.5 (121)/950 Tensile Modulus 380 Denier,(420 d tex), 0.6% Finish
SAE AMS3901/3C-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/2309 Tensile Strength 16.5 (114)/900 Tensile Modulus 1140 Denier, (1270 d tex), 0.6% Finish
SAE AMS3901/4C-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.8 Tensile Strength, 16.5 (114)/955 Tensile Modulus 1420 Denier, (1580 d tex), 0.6% Finish
SAE AMS3901/7C-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/20.9 Tensile Strength, 16.5 (114)/895 Tensile Modulus 2160 Denier, (2400 d tex), 0.6% Finish
SAE AMS3901/8B-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/2206 Tensile Strength, 18 (124)/1005 Tensile Modulus 195 Denier, (215 d tex), 1.2% Finish
SAE AMS4367A-2022 Aluminum Alloy, Extruded Profiles, 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T74511), Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
SAE AMS4168J-2003 Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated, Unstraightened
SAE AMS4173E-2003 Aluminum Alloy, Extrusions 1.0Mg 0.60Si 0.30Cu 0.20Cr (6061-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated
SAE AMS4344C-2006 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated, Stress Relieved by Stretching, Staightened,, and Overaged UNS A97175
SAE AMS4341E-2006 Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged UNS A97050
SAE AMS4162E-2014 Aluminum Alloy@ Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated@ Stress Relief Stretched@ Straightened@ and Precipitation Heat Treated (UNS A92219)
SAE AMS4165H-2013 Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
SAE AMS4169K-2003 Aluminum Alloy, Extrusions 5.6Zn 2.5Mg 1.6Cu 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened and Precipitation Heat Treated
SAE AMS4344B-1998 Aluminum Alloy, Extrusions, 5.6Zn 2.5Mg 1.6Cu 0.23Cr Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
SAE AMS4341D-1998 Aluminum Alloy, Extrusions 6.2Zn 2.3Cu 2.2Mg 0.12Zr Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
SAE AMS4163D-2008 Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
SAE AMS4163G-2022 Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
SAE AMS5637G-2001 Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn 125 ksi (862 MPa) Tensile Strength UNS S30200
SAE AMS4341E-2011 Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
SAE AMS4341G-2018 Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
SAE AMS3901/10B-1998 Yarn, Organic Fiber (Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 16.5 (114)/945 Tensile Modulus 1140 (1270 d tex) Denier, 1.2% Finish
SAE AMS4294-2006 Aluminum Alloy Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T5511) Press Heat Treated, Stress Relieved by Stretching, Straightened, and Artificially Aged
SAE AMS4374A-2022 Aluminum Alloy, Extruded Profiles 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T73511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Overaged
SAE AMS-QQ-A-225/4-1997(R2007) Aluminum Alloy, 2014, Bar, Rod, Wire and Special Shapes,Rolled, Drawn, or Cold Finished
SAE AMS4307B-2012 Aluminum Alloy, Extrusions 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T61511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated
SAE AMS4162D-2008 Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Relief Stretched, Straightened, and Precipitation Heat Treated
SAE AMS4169K-2008 Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened and Precipitation Heat Treated
SAE AMS4162B-1998 Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Relief Stretched, Straightened, and Precipitation Heat Treated
SAE AMS4173E-2008 Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated
SAE AMS4162F-2020 Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated, Stress Relief Stretched, Straightened, and Precipitation Heat Treated

CU-NC, extensometer straight line

NC 43-14-1968 Particle boards and fibre boards Tensile strength perpendicular to the surface
NC 43-08-6-1987 Artificial and Natural Wood Industry. Partiole Boards. Tensile Strength Perpendicular to Board Surface

TR-TSE, extensometer straight line

TS 958-1971 D?AMETERS OF DRAFTING ROLLERS FOR COTTON, WOOL, SPUN STLK. AND STAPLE FIBRE
TS 2951-1978 LIQUID FLOW MEASUREMENT IN OPtEN CHANNELS - CALIBRATION OF ROTATING - ELEMENT CURRENT - METERS IN STRAIGHT OPEN TANKS
TS 246-1965 METHOD OF DETERM1NING THE TENSILE STRENGTH, ELONGATION AND COUNT-STRENGTH PRODUCT OF YARN SKENS, BY THE CONSTANT SPEED DYNAMOMETER

American Concrete Institute, extensometer straight line

ACI 408R-2003 Bond and Development of Straight Reinforcing Bars in Tension

PL-PKN, extensometer straight line

PN P04674-1987 Yarn Determination of static tensile indices Skein method
PN P04728-1973 Netting knot tensile test for yarns and ropes
PN BN 9317-27-1966

IT-UNI, extensometer straight line

Professional Standard - Aerospace, extensometer straight line

QJ 1615-1989 固体发动机
QJ 2487-1993 Method for Determination of Uniaxial Tensile Stress Relaxation Modulus and Principal Curve of Composite Solid Propellant

SAE - SAE International, extensometer straight line

SAE AMS4164G-1998 Aluminum Alloy@ Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Stress-Relief Stretched@ Unstraightened (UNS A92024)
SAE AMS4168E-1979 Aluminum Alloy@ Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Stress-Relief Stretched@ Unstraightened (UNS A97075)
SAE AMS3892/2C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength@ 50 (345) Tensile Modulus
SAE AMS3892/4C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 300 (2068) Tensile Strength@ 75 (517) Tensile Modulus
SAE AMS3892/6B-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 325 (2241) Tensile Strength@ 57 (393) Tensile Modulus
SAE AMS3892/5C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 220 (1517) Tensile Strength@ 75 (517) Tensile Modulus
SAE AMS3892/3C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength@ 40 (276) Tensile Modulus
SAE AMS3892/1C-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF 400 (2758) Tensile Strength@ 33 (228) Tensile Modulus
SAE AMS3892/7B-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength@ 33 (228) Tensile Modulus
SAE AMS3892/8B-2016 Tow or Yarn@ Carbon Fibers For Structural Composites GF (0X) 400 (2758) Tensile Strength@ 40 (276) Tensile Modulus
SAE AMS4165F-1992 Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Stress- Relieved Stretched and Straightened
SAE AMS3901/1B-1992 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689) /23.5 Tensile Strength@ 18 (124)/982 Tensile Modulus 195 Denier@ 0.6% Finish
SAE AMS3901/2B-1992 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689) /24.5 Tensile Strength@ 17.5 (121)/934 Tensile Modulus 380 Denier@ 0.6% Finish
SAE AMS3901/8A-1992 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689) /23.5 Tensile Strength@ 18 (124)/982 Tensile Modulus 195 Denier@ 1.2% Finish
SAE AMS3901/14-1996 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689) /22.5 Tensile Strength@ 16.5 (114)/830 Tensile Modulus 2840 Denier@ 0.6% Finish
SAE AMS3901/10A-1992 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689) /23.6 Tensile Strength@ 16.5 (114)/885 Tensile Modulus 1140 Denier@ 1.2% Finish
SAE AMS3901/17-1996 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689) /23.5 Tensile Strength@ 16.5 (114)/900 Tensile Modulus 720 Denier@ 1.2% Finish
SAE AMS3901/4B-1992 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689) /24.3 Tensile Strength@ 16.5 (114)/900 Tensile Modulus 1420 Denier@ 0.6% Finish
SAE AMS3901/3B-1992 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689) /25.5 Tensile Strength@ 16.5 (114)/900 Tensile Modulus 1140 Denier@ 0.6% Finish
SAE AMS3901/9A-1992 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689) /24.5 Tensile Strength@ 17.5 (121)/934 Tensile Modulus 380 Denier@ 1.2% Finish
SAE AMS3901/11A-1992 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689) /22.2 Tensile Strength@ 16.5 (114)/870 Tensile Modulus 1420 Denier@ 1.2% Finish
SAE AMS3901/13-1996 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689) /22.6 Tensile Strength@ 16.5 (114)/840 Tensile Modulus 2450 Denier@ 0.6% Finish
SAE AMS3901/7B-1996 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689)/22.0 Tensile Strength@ 16.5 (114)/825 Tensile Modulus 2160 Denier@ 0.6% Finish
SAE AMS3901/12A-1992 Yarn@ Organic Fiber (Para-Aramid)@ High Modulus OY 390 (2689) /21.5 Tensile Strength@ 16.5 (114)/825 Tensile Modulus 2160 Denier@ 1.2% Finish
SAE AMS4163F-2017 Aluminum Alloy@ Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated@ Stress-Relieved by Stretching@ and Straightened (UNS A92219)
SAE AMS4163C-1998 Aluminum Alloy@ Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated@ Stress-Relieved by Stretching@ and Straightened (UNS A92219)
SAE AMS4165E-1978 ALUMINUM ALLOY EXTRUSIONS 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Stress- Relief Stretched and Straightened (UNS A92024)
SAE AMS4367-2016 Aluminum Alloy@ Extruded Profiles 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T74511) Solution Heat Treated@ Stress Relieved by Stretching@ Straightened@ and Overaged
SAE AMS4164J-2019 Aluminum Alloy@ Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Solution Heat Treated@ Cold Worked@ Stress-Relieved by Stretching@ Unstraightened (UNS A92024)
SAE AMS4341F-2018 Aluminum Alloy@ Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511) Solution Heat Treated@ Stress Relieved by Stretching@ Straightened@ and Overaged (UNS A97050)
SAE AMS4344E-2018 Aluminum Alloy@ Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated@ Stress Relieved by Stretching@ Straightened@ and Overaged (UNS A97175)
SAE AMS4169H-1992 Aluminum Alloy Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated@ Stress Relieved by Stretching@ and Precipitation Heat Treated Straightened
SAE AMS4344F-2018 Aluminum Alloy@ Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T73511) Solution Heat Treated@ Stress Relieved by Stretching@ Straightened@ and Overaged (UNS A97175)
SAE AMS4374-2016 Aluminum Alloy@ Extruded Profiles 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T73511) Solution Heat Treated@ Stress Relieved by Stretching@ Straightened@ and Overaged
SAE AMS4294A-2010 Aluminum Alloy Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T5511) Press Heat Treated@ Stress Relieved by Stretching@ Straightened@ and Artificially Aged (UNS A96061)
SAE AMS4173D-1998 Aluminum Alloy@ Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511) Solution Heat Treated@ Stress Relieved by Stretching@ Straightened@ and Precipitation Heat Treated (UNS A96061)
SAE AMS4162C-1998 Aluminum Alloy@ Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated@ Stress Relief Stretched@ Straightened@ and Precipitation Heat Treated (UNS A92219)
SAE AMS4307C-2017 Aluminum Alloy@ Extrusions 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr (7150-T61511) Solution Heat Treated@ Stress Relieved by Stretching@ Straightened@ and Precipitation Heat Treated (UNS A97150)
SAE AMS4165G-1998 Aluminum Alloy@ Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Solution Heat Treated@ Stress-Relieved by Stretching@ and Straightened (UNS A92024)
SAE AS85896-2002 Ladder@ Aircraft Maintenance@ Aluminum@ Three-Way Combination (Step@ Straight and Extension)@ General Specification for
SAE AS85896A-2011 Ladder@ Aircraft Maintenance@ Aluminum@ Three-Way Combination (Step@ Straight and Extension)@ General Specification for
SAE AMS4165J-2019 Aluminum Alloy@ Extrusions 4.4Cu – 1.5Mg – 0.60Mn (2024-T3511) Solution Heat Treated@ Cold Worked@ Stress-Relieved by Stretching@ and Straightened (UNS A92024)

IN-BIS, extensometer straight line

Defense Logistics Agency, extensometer straight line

DLA MIL-DTL-55668 C-2005 CORD, ELECTRICAL; AUDIO, SUBMINIATURE (RETRACTILE AND STRAIGHT)
DLA MIL-DTL-55668 D-2009 CORD, ELECTRICAL; AUDIO, SUBMINIATURE (RETRACTILE AND STRAIGHT)

Taiwan Provincial Standard of the People's Republic of China, extensometer straight line

CNS 10520-1983 Variable X-Ray Beam Limiting Devices for Diagnostic Use
CNS 10521-1983 Method of Test for Variable X-ray Beam Limiting Devices for Diagnostic Use
CNS 7856-1981 Calculation and Design for Helical Tension Springs Made of Round Wire or Round Bar

Professional Standard - Machinery, extensometer straight line

JB/T 11501-2013 Straightness measuring instruments with air bearings
JB/T 4279.3-1994 Enamelled winding wire test equipment and equipment verification method elongation tester
JB/T 12641-2016 Straight cylindrical involute splines.Meter
JB/T 4279.3-2008 Verification procedure for test equipment of enamelled winding wire.Part 3:Elongation tester
JB/T 4279.5-1994 Enamelled winding wire test equipment verification method emergency pull-off tester
JB/T 4279.5-2008 Verification procedure for test equipment of enamelled winding wire.Part 5:Jerk tester
JB/T 7780.4-1995 Test methods for mechanical and physical properties of wire rods for rivet contacts Tensile test methods for wire rods for rivet contacts

CH-SNV, extensometer straight line

国家市场监督管理总局、中国国家标准化管理委员会, extensometer straight line

GB/T 14615-2019 Inspection of grain and oils—Doughs rheological properties determination of wheat flour—Extensograph test
GB/T 39635-2020 Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test
GB/T 36805.2-2020 Plastics—Determination of tensile properties at high strain rates—Part 2: Direct testing method
GB/T 38841-2020 Mechanical properties measurement—Room temperature tensile test of reacted Nb3Sn composite superconductors

British Standards Institution (BSI), extensometer straight line

BS EN ISO 10618:2000 Carbon fibre - Determination of tensile properties of resin-impregnated yarns
BS EN 319:1993 Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board
BS EN 14488-4:2005 Testing sprayed concrete - Bond strength of cores by direct tension
BS ISO 22183:2023 Plastics. Validation of force-time curves obtained from high-speed tensile tests
BS EN IEC 61788-25:2018 Superconductivity - Mechanical properties measurement. Room temperature tensile test on REBCO wires
22/30427884 DC BS ISO 22183. Plastics. Validation of force-time curve of tensile testing at high speed
PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
BS EN 14488-4:2005+A1:2008(2009) Testing sprayed concrete - Part 4: Bond strength of cores by direct tension
BS EN 14488-4:2005+A1:2008 Testing sprayed concrete - Part 4: Bond strength of cores by direct tension
BS EN 2597:1998 Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction
BS EN ISO 2062:2010 Textiles. Yarns from packages. Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
BS EN ISO 2062:2009 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
BS ISO 4647:2010 Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test
BS 5350-C6:1990 Methods of test for adhesives - Adhesively bonded joints: mechanical tests - Determination of bond strength in direct tension in sandwich panels
20/30374680 DC BS EN ISO 5530-2. Wheat flour. Physical characteristics of doughs - Part 2. Determination of rheological properties using an extensograph
BS EN 13906-2:2013 Cylindrical helical springs made from round wire and bar. Calculation and design. Extension springs
BS EN ISO 5530-2:2015 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using an extensograph
BS ISO 20975-1:2023 Fibre-reinforced plastic composites. Determination of laminate of through-thickness properties - Direct tension and compression tests

ESDU - Engineering Sciences Data Unit, extensometer straight line

ESDU 83002-1982 Allowable stresses for helical compression and tension springs of round wire.
ESDU 82008 B-1991 Elastic stresses and deflections of helical compression and tension springs of round wire.
ESDU 83003-1982 Notes on the design of helical compression and tension springs of round wire.
ESDU 82022-2013 Endurance of steel lugs with clearance-fit pins (Tensile mean stress)
ESDU 82022-1982 Endurance of steel lugs with clearance-fit pins. (Tensile mean stress.)
ESDU 80007 A-1984 Endurance of aluminium alloy lugs with nominally push-fit pins (tensile mean stress).

Danish Standards Foundation, extensometer straight line

DS/EN 13864:2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
DS 926:1955 Textile testing. Determination of breaking load and elongation at break of yarn. Tensile test
DS/EN 14488-4+A1:2008 Testing sprayed concrete - Part 4: Bond strength of cores by direct tension
DS/ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
DS/EN ISO 2062:2010 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
DS/EN 2597:1999 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction

Lithuanian Standards Office , extensometer straight line

LST EN 13864-2004 Surfaces for sports areas - Determination of tensile strength of synthetic yarns
LST EN ISO 10618:2004 Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004)
LST EN 14488-4-2005+A1-2008 Testing sprayed concrete - Part 4: Bond strength of cores by direct tension
LST EN ISO 2062:2010 Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester (ISO 2062:2009)
LST EN 2597-2001 Aerospace series - Carbon fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction
LST ISO 5530-2:2012 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012, identical)

Military Standard of the People's Republic of China-General Armament Department, extensometer straight line

GJB 772.111-1993 Explosives Test Method Tensile Stress-Strain Curve Determination

国家药监局, extensometer straight line

YY/T 1832-2022 Suture tensile test method for sports medicine implantable devices

PT-IPQ, extensometer straight line

NP EN 754-7-2000 Aluminium and aluminium alloys Cold drawn rod/bar and tube Part 7:Seamless tubes,tolerances on dimensions and form
NP 3302-1988 Small tools Wire, bar or tube drawing dies. As sintered pellets of hard metal (carbide). Dimensions

European Committee for Standardization (CEN), extensometer straight line

EN 319:1993 Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board
prEN 319-1992 Particleboards and fibreboards; determination of tensile strength perpendicular to the plane of the board
EN 3475-505:2012 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands
EN ISO 5530-2:2014 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph
FprEN ISO 5530-2 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/FDIS 5530-2:2021)
EN 10002-3:1994 Metallic Materials - Tensile Test - Part 3: Calibration of Force Proving Instruments Used for the Verification of Uniaxial Testing Machines

未注明发布机构, extensometer straight line

BS EN 319:1993(1999) Particleboards and fibreboards — Determination of tensile strength perpendicular to the plane of the board

National Metrological Verification Regulations of the People's Republic of China, extensometer straight line

JJG(兵器) 001-1986 Verification regulations for barrel straightness tester
JJG(机械) 85-1992 Verification regulations for tapered roller diameter, angle and linearity measuring instrument
JJG 380-1995 Verification Regulation of Instruments for Measuring the Diameter、Angle and Straightness of Bearing Tapered Roller

(U.S.) Parachute Industry Association, extensometer straight line

PIA-TEST METHOD-4108C-2011 STRENGTH AND ELONGATION, BREAKING; TEXTILE WEBBING, TAPE AND BRAIDED ITEMS

(U.S.) Ford Automotive Standards, extensometer straight line

FORD FLTM BN 117-1-2001 DETERMINATION OF THE EFFECT OF FADEOMETER AGING ON TENSILE STRENGTH OF SEWING THREADS
FORD FLTM EU BN 017-1-2001 DETERMINATION OF THE CHANGE IN TENSILE STRENGTH OF SEWING THREADS AND SEAT BELTS AFTER AGEING
FORD FLTM BN 017-1-2001 DETERMINATION OF THE EFFECT OF FADEOMETER AGING ON TENSILE STRENGTH OF SEWING THREADS AND SEAT BELTS

Professional Standard - Textile, extensometer straight line

FZ/T 01069-1999 Measuring method of yarn diameter CCD measuring instrument method

中国轻工总会, extensometer straight line

ZBW 0017-1989 Yarn diameter measurement method CCD measuring instrument method

Professional Standard - Water Conservancy, extensometer straight line

SL/T 150-1995 Calibration method of rotating.element current.meters in straight open tank

Standard Association of Australia （SAA）, extensometer straight line

AS/NZS 4266.6:2004 Reconstituted wood-based panels - Methods of test - Tensile strength perpendicular to the plane of the panel (internal bond strength)

CENELEC - European Committee for Electrotechnical Standardization, extensometer straight line

EN IEC 61788-25:2018 Superconductivity - Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires

ES-UNE, extensometer straight line

UNE-EN IEC 61788-25:2018 Superconductivity - Part 25: Mechanical properties measurement - Room Temperature Tensile Test on REBCO Wires (Endorsed by Asociación Española de Normalización in December of 2018.)
UNE-EN 4057-401:2006 Aerospace series - Cable ties for harnesses - Test methods - Part 401: Loop tensile strength (Endorsed by AENOR in April of 2007.)

Professional Standard - Electricity, extensometer straight line

DL/T 2621-2023

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, extensometer straight line

PREN 2597-1990 Aerospace Series Carbon Thermosetting Resin Undirectional Laminates Tensile Test Perpendicular to the Fibre Direction (Issue P 1)

European Association of Aerospace Industries, extensometer straight line

AECMA PREN 3475-505-2006 Aerospace series Cables, electrical, aircraft use Test methods Part 505: Tensile test on conductors and strands Edition P 2

VE-FONDONORMA, extensometer straight line

NORVEN 64-4-1967

International Electrotechnical Commission (IEC), extensometer straight line

IEC 61788-25:2018 Superconductivity - Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires

Institute of Electrical and Electronics Engineers (IEEE), extensometer straight line

IEEE 1210/COR 1-2014 Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable Corrigendum 1

The Aluminum Association, extensometer straight line

AA AMSST-1999 A Method of Stress-Strain Testing of Aluminum Conductor and ACSR and A Test for Determining the Long Time Tensile Creep of Aluminum Conductors in Overhead Lines