ZH
RU
ES

indentation

indentation, Total:496 items.

In the international standard classification, indentation involves: Non-textile floor coverings, Testing of metals, Non-ferrous metals, Paper and board, Dentistry, Construction materials, Road engineering, Plastics, Paints and varnishes, Cutting tools, Ceramics, Wood, sawlogs and sawn timber, Non-metalliferous minerals, Protection against crime, Mechanical testing, Glass, Sports equipment and facilities, Elements of buildings, Safety of machinery, Surface treatment and coating, Refractories, Non-destructive testing, Rubber, Cellular materials, Semi-manufactures of timber, Tyres, Electrical wires and cables, Reinforced plastics, Textile machinery, Finances. Banking. Monetary systems. Insurance, Law. Administration, Iron and steel products, Powder metallurgy, Applications of information technology, Continuous handling equipment, Electrical accessories, Electrical and electronic testing, Petroleum, petroleum products and natural gas handling equipment, Products of the textile industry, Ferrous metals, Paint coating processes, Linear and angular measurements.

British Standards Institution (BSI), indentation

BS ISO 24343-1:2007 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Residual indentation
BS EN ISO 24343-1:2012 Resilient and laminate floor coverings. Determination of indentation and residual indentation. Residual indentation
BS ISO 24343-2:2018 Resilient and laminate floor coverings. Determination of indentation and residual indentation - Short-term indentation and residual indentation of resilient floor covering
BS ISO 24343-3:2018 Resilient and laminate floor coverings. Determination of indentation and residual indentation - Indentation of resilient semi-flexible/vinyl composition tiles
PD ISO/TR 29381:2008 Metallic materials. Measurement of mechanical properties by an instrumented indentation test. Indentation tensile properties
BS EN ISO 2815:2003 Paints and varnishes — Buchholz indentation test
BS ISO 14577-5:2022 Metallic materials. Instrumented indentation test for hardness and materials parameters - Linear elastic dynamic instrumented indentation testing (DIIT)
BS EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation
20/30383255 DC BS ISO 14577-5. Metallic materials. Instrumented indentation test for hardness and materials parameters. Part 5. Linear elastic dynamic instrumented indentation testing (DIIT)
BS ISO 19207:2016 Thermal spraying. Classification method of adhesive strength by indentation
PD ISO/TS 19278:2019 Plastics. Instrumented micro-indentation test for hardness measurement
BS EN ISO 2439:2001 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
BS EN ISO 2439:2009 Flexible cellular polymeric materials. Determination of hardness (indentation technique)
BS EN ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
BS ISO 20267:2017 Thermal spraying. Determination of interfacial toughness of ceramic coatings by indentation
BS EN 16974:2016 Conveyor belts. Indentation rolling resistance related to belt width. Requirements, testing
BS EN 1534:2020 Wood flooring and parquet. Determination of resistance to indentation. Test method
BS ISO 23586:2022 Conveyor belts. Indentation rolling resistance related to belt width. Requirements and testing
PD ISO/TS 20746:2016 Dentistry. Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
BS 3900-E12.2:2000 Methods of test for paints - Determination of Knoop hardness by measurement of the indentation depth
BS EN 433:1994 Resilient floor coverings - Determination of residual indentation after static loading
BS EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
19/30388218 DC BS EN 1534. Wood flooring. Determination of resistance to indentation (Brinell). Test method
21/30412527 DC BS ISO 23586. Conveyor belts. Indentation rolling resistance related to belt width. Requirements, testing
BS PD ISO/TS 20746:2016 Dentistry. Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
BS EN 12697-21:2020 Tracked Changes. Bituminous mixtures. Test methods. Indentation using plate specimens
BS 903-A57:1997 Physical testing of rubber - Determination of indentation hardness by means of pocket hardness meters
BS EN 12697-21:2012 Bituminous mixtures. Test methods for hot mix asphalt. Indentation using plate specimens
BS EN 12697-21:2003 Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using plate specimens
BS 3900-E12.1:2000 Methods of test for paints - Determination of Knoop hardness by measurement of the indentation length using a microscope
BS ISO 7619-2:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. IRHD pocket meter method
BS EN 59:2016 Glass reinforced plastics. Determination of indentation hardness by means of a Barcol hardness tester
BS EN ISO 14577-1:2002 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
BS ISO 7619-1:2010 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Durometer method (Shore hardness)
BS EN ISO 14577-1:2015 Metallic materials. Instrumented indentation test for hardness and materials parameters. Test method
18/30382710 DC BS EN 12697-21. Bituminous mixtures. Test methods. Part 21. Indentation using plate specimens
BS EN 12697-20:2012 Bituminous mixtures. Test methods for hot mix asphalt. Indentation using cube or cylindrical specimens (CY)
BS EN 12697-20:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 20:Indentation using cube or Marshall specimens
BS EN 12697-20:2004 Bituminous mixtures. Test methods for hot mix asphalt. Indentation using cube or Marshall specimens
BS EN 12697-20:2020 Tracked Changes. Bituminous mixtures. Test methods. Indentation using cube or Marshall specimens

Association Francaise de Normalisation, indentation

NF EN ISO 24343-1:2012 Revêtements de sol résilients et stratifiés - Détermination du poinçonnement et du poinçonnement rémanent - Partie 1 : poinçonnement rémanent
NF P62-110-1*NF EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1 : residual indentation.
NF ISO 24343-2:2019 Revêtements de sol résilients et stratifiés - Détermination du poinçonnement et du poinçonnement rémanent - Partie 2 : poinçonnement rémanent de courte durée des revêtements de sol résilients
NF T66-002:1984 Indentation tests form mastic asphalts.
NF T30-019:1995 Paints and varnishes. Cupping test.
NF EN 1516:1999 Sols sportifs - Détermination de la résistance à l'indentation.
NF ISO 24343-3:2019 Revêtements de sol résilients et stratifiés - Détermination du poinçonnement et du poinçonnement rémanent - Partie 3 : poinçonnement de carreaux semi-flexibles/carreaux de composition vinylique résilients
NF EN ISO 2815:2003 Peintures et vernis - Essais d'indentation Buchholz
NF ISO 19207:2016 Projection thermique - Méthode de classification de la résistance adhésive par indentation
NF A91-218*NF ISO 19207:2016 Thermal spraying - Classification method of adhesive strength by indentation
NF T30-052*NF EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test.
NF T56-111:1986 Plastics. Flexible cellular materials. Determination of identation characteristics.
NF EN ISO 2039-1:2003 Plastiques - Détermination de la dureté - Partie 1 : méthode de pénétration à la bille
NF T56-111*NF EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique).
NF EN ISO 2439:2009 Matériaux polymères alvéolaires souples - Détermination de la dureté (technique par indentation)
NF EN 12697-21:2020 Mélanges bitumineux - Méthodes d'essai - Partie 21 : essai d'indentation de plaques
NF B53-646*NF EN 1534:2020 Wood flooring and parquet - Determination of resistance to indentation - Test method
NF EN 59:2016 Matières plastiques renforcées de verre - Détermination de la dureté par pénétration au moyen d'un appareil d'essai de dureté Barcol
NF T57-106:1977 Glass reinforced plastics. Measurement of hardness by means of a barcol impressor .
NF T57-106*NF EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
NF P98-818-21*NF EN 12697-21:2020 Bituminous mixtures - Test methods - Part 21 : indentation using plate specimens
NF P90-108:1993 Sports field. Indentation resistance test of football cleats on sanded synthetic turf
NF T47-127*NF EN 16974:2016 Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing
NF T51-174*NF EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
XP P84-523:2008 Geomembranes - Geomembranes lining system - Determination of the indentation resistance under hydrostatic load
NF EN ISO 3385:2014 Matériaux polymères alvéolaires souples - Détermination de la fatigue par indentation à charge constante
NF EN 4864:2020 Série aérospatiale - Essais d'environnement - Essai haute dynamique d'abrasion, d'éraflure, de rayure et de poinçonnage en cabine intérieure
NF T46-052:1988 Vulcanized or thermoplastic rubber. Determination of identation hardness by means of type shore pocket hardness meters.
NF EN 13523-6:2020 Tôles prélaquées - Méthodes d'essai - Partie 6 : adhérence après indentation (essai d'emboutissage)
NF EN 4609:2019 Série aérospatiale - Empreintes en spirale pour éléments de fixation filetés - Définition géométrique et exigences techniques
NF T37-001-6:2002 Coil coat metals - Test methods - Part 6 : adhesion after indentation (cupping test).
NF T37-001-6*NF EN 13523-6:2020 Coil coated metals - Test methods - Part 6 : adhesion after indentation (cupping test)
NF T51-170-4*NF EN ISO 22088-4:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4 : ball or pin impression method.
NF P98-818-20*NF EN 12697-20:2020 Bituminous mixtures - Test methods - Part 20 : indentation using cube or Marshall specimens
NF EN 16974:2016 Courroies transporteuses - Résistance au roulement par suite d'enfoncement relative à la largeur de courroie - Exigences, essais
NF EN 14574:2015 Géosynthétiques - Détermination de la résistance au poinçonnement pyramidal des géosynthétiques sur support
NF L31-082:1979 Assembly and spot stamping of ball bearings and spherical plain bearings. Spot stamping by spherical indentations with 2 mm diameter ball.
NF P98-818-21:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 21 : indentation using plate specimens.
NF P98-818-21:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 21 : indentation using plate specimens.
NF A03-155-1*NF EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1 : test method

Korean Agency for Technology and Standards (KATS), indentation

KS B 0950-2009 Metallic materials－Instrumented indentation test for indentation tensile properties
KS K ISO 24343-1:2010 Resilient and laminate floor coverings－Determination of indentation and residual indentation－Part 1：Residual indentation
KS K ISO 24343-1-2010(2020) Resilient and laminate floor coverings－Determination of indentation and residual indentation－Part 1：Residual indentation
KS K ISO 24343-2:2019 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2: Short-term indentation and residual indentation of resilient floor covering
KS K ISO 24343-2:2016 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2： Short-term residual indentation of resilient floor covering
KS B 0950-2009(2019) Metallic materials－Instrumented indentation test for indentation tensile properties
KS K ISO 24343-3:2019 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
KS K ISO 24343-3:2016 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3： Indentation of resilient semi-flexible/vinyl composition tiles
KS M ISO 6441-1:2005 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS M ISO 6441-1:2002 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS M ISO 6441-2:2002 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
KS M ISO 6441-2:2005 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
KS L 1208-2005 TESTING METHOD FOR KNOOP INDENTATION HARDNESS OF CERAMIC WHITEWARES
KS M ISO 2815:2011 Paints and varnishes-Buchholz indentation test
KS M ISO 2815-2011(2016) Paints and varnishes－Buchholz indentation test
KS M ISO 2815:2021 Paints and varnishes — Buchholz indentation test
KS M ISO 2039-1-2003(2018) Plastics－Determination of hardness－Part 1：Ball indentation method
KS M ISO 2439-2012(2017) Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
KS M ISO 2439-2012(2022) Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
KS M ISO 6441:2003 Paints and varnishes－Indentation test(spherical or pyramidal)
KS M ISO 6441:2005 Paints and varnishes－Indentation test(spherical or pyramidal)
KS M ISO 2439:2012 Flexible cellular polymeric materials－ Determination of hardness(indentation technique)
KS B ISO 14577-1-2004(2009) Metallic materials－Instrumented indentation test for hardness and materials parameters－Part 1：Test method
KS L ISO 9385-2010(2020) Testing method for knoop indentation hardness of glass and glass-ceramics
KS L 2102-2000 Testing method for knoop indentation hardness of glass and glass-ceramics
KS L 2102-1980 Testing method for knoop indentation hardness of glass and glass-ceramics
KS M ISO 868-2016(2021) Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS B 0951-2008(2018) Instrumented indentation tests on welds in steel－Measurement of residual stress on welded joints
KS P ISO TS 20746:2019 Dentistry — Determination of the strength of dental amalgam by the Hertzian indentation strength(HIT) method
KS B ISO 14577-1:2004 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS B ISO 14577-1:2015 Metallic materials-Instrumented indentation test for hardness and materials parameters-Part 1:Test method
KS M ISO 7619-1:2011 Rubber, vulcanized or thermoplastic-Determination of indentation hardness-Part 1:Durometer method(Shore hardness)

International Organization for Standardization (ISO), indentation

ISO 24343-1:2007 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation
ISO 24343-3:2011 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
ISO 24343-3:2018 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
ISO 24343-2:2011 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 2: Short-term residual indentation of resilient floor covering
ISO 24343-2:2018 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 2: Short-term indentation and residual indentation of resilient floor covering
ISO/TR 29381:2008 Metallic materials - Measurement of mechanical properties by an instrumented indentation test - Indentation tensile properties
ISO 1520:1999 Paints and varnishes - Cupping test
ISO 1520:1973 Paints and varnishes; Cupping test
ISO 3351:1975 Wood; Determination of resistance to impact indentation
ISO/DTS 19096 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO/TS 19096:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Evaluation of stress change using indentation force differences
ISO 6441-1:1999 Paints and varnishes - Determination of micro-indentation hardness - Part 1: Knoop hardness by measurement of indentation length
ISO 2815:2003 Paints and varnishes - Buchholz indentation test
ISO 7619:1986 Rubber; Determination of indentation hardness by means of pocket hardness meters
ISO 6441:1984 Paints and varnishes; Indentation test (spherical or pyramidal)
ISO 2815:1973 Paints and varnishes; Buchholz indentation test
ISO 14577-5:2022 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 5: Linear elastic dynamic instrumented indentation testing (DIIT)
ISO 6441-2:1999 Paints and varnishes - Determination of micro-indentation hardness - Part 2: Knoop hardness by measurement of indentation depth under load
ISO 2039:1973 Plastics and ebonite — Determination of hardness by the ball indentation method
ISO 2439:1972 Title missing - Legacy paper document
ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
ISO 2039-1:1987 Plastics — Determination of hardness — Part 1: Ball indentation method
ISO 868:1978 Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 2439:1980 Polymeric materials, cellular flexible; Determination of hardness (indentation technique)
ISO 4600:1981 Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method
ISO 19207:2016 Thermal spraying - Classification method of adhesive strength by indentation
ISO 4600:1992 Plastics; determination of environmental stress cracking (ESC); ball or pin impression method
ISO/TS 19278:2019 Plastics — Instrumented micro-indentation test for hardness measurement
ISO 2039-2:1981 Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness
ISO 20267:2017 Thermal spraying - Determination of interfacial toughness of ceramic coatings by indentation
ISO 2439:1997/Cor 1:1998 Flexible cellular polymeric materials - Determination of hardness (indentation technique); Technical Corrigendum 1
ISO 23586:2022 Conveyor belts — Indentation rolling resistance related to belt width — Requirements and testing
ISO/TS 20746:2016 Dentistry - Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method
ISO 868:1985 Plastics and ebonite; Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
ISO 7619-1:2010 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness)
ISO 17170:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for spherical indentation of porous ceramics

European Committee for Standardization (CEN), indentation

EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)
EN ISO 14577-1:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015)
EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
EN ISO 14577-2:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
EN ISO 2815:1998 Paints and Varnishes - Buchholz Indentation Test ISO 2815: 1973
EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation
EN ISO 2439:2008 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
EN ISO 4600:1997 ISO 4600: 1992
EN 433:1994 Resilient Floor Coverings - Determination of Residual Indentation After Static Loading
EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test ISO 2815: 2003
CWA 17552-2020 Engineering materials - Electronic data interchange - Instrumented indentation test data
CWA 17552:2020 Engineering materials - Electronic data interchange - Instrumented indentation test data
prEN 667-1992 Rubber floor coverings; determination of indentation hardness by means of a durometer (Shore A hardness)
EN ISO 868:1997 Plastics and Ebonite - Determination of Indentation Hardness by Means of a Durometer (Shore Hardness) ISO 868: 1985
EN 16974:2016 Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing
EN 12697-21:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens
EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
CEN EN 13523-6-2002 Coil Coated Metals - Test Methods - Part 6: Adhesion After Indentation (Cupping Test)
prEN ISO 14577-1 rev Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method

KR-KS, indentation

KS K ISO 24343-2-2019 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 2: Short-term indentation and residual indentation of resilient floor covering
KS K ISO 24343-3-2019 Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 3: Indentation of resilient semi-flexible/vinyl composition tiles
KS M ISO 6441-1-2002 Paints and varnishes－Determination of micro－indentation hardness－Part 1：Knoop hardness by measurement of indentation length
KS M ISO 6441-2-2002 Paints and varnishes－Determination of micro－indentation hardness－Part 2：Knoop hardness by measurement of indentation depth under load
KS M ISO 2815-2021 Paints and varnishes — Buchholz indentation test
KS M ISO 6441-2003 Paints and varnishes－Indentation test(spherical or pyramidal)
KS M ISO 868-2016 Plastics and ebonite－Determination of indentation hardness by means of a durometer(Shore hardness)
KS P ISO TS 20746-2019 Dentistry — Determination of the strength of dental amalgam by the Hertzian indentation strength(HIT) method
KS M ISO 7619-2-2016 Rubber, vulcanized or thermoplastic－Determination of indentation hardness－Part 2：IRHD pocket meter method

Military Standards (MIL-STD), indentation

DOD A-A-53337 A-1988 WAX, DENTAL (IMPRESSION)
DOD A-A-54197-1990 SYRINGE, DENTAL, IMPRESSION MATERIAL
DOD A-A-51566-1986 IMPRESSION MATERIAL, DENTAL (AGAR TYPE)
DOD A-A-53385-1988 ADHESIVE, IMPRESSION MATERIAL, DENTAL (RUBBER BASE)
DOD A-A-53388-1988 IMPRESSION MATERIAL, DENTAL (ALGINATE)
DOD A-A-53797-1989 IMPRESSION TRAY, DENTAL (WATER-COOLED)
DOD A-A-54272-1990 IMPRESSION MATERIAL, DENTAL, PASTE, VARIABLE VISCOSITY
DOD A-A-53600-1988 TRAYS, IMPRESSION, DENTAL (NON-WATER COOLED)
DOD A-A-54345-1991 BATH, WATER, DENTAL IMPRESSION COMPOUND
DOD A-A-53908-1989 SYRINGE, DENTAL IMPRESSION MATERIAL AND ACCESSORY KIT
DOD A-A-54070-1990 MIXING TIPS, DENTAL IMPRESSION, SYRINGE, DISPOSABLE, 48S

Danish Standards Foundation, indentation

DS/EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation
DS 1097.5:1975 Floorings. Determination of indentation. Short-time test
DS/EN ISO 2815:2004 Paints and varnishes - Buchholz indentation test
DS/EN 1516:1999 Surfaces for sports areas - Determination of resistance to indentation
DS/ISO 7619:1989 Rubber. Determination of indentation hardness by means of pocket hardness meters
DS/EN 1534:2011 Wood flooring - Determination of resistance to indentation - Test method
DS/EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1: Ball indentation method
DS/EN 59:1978 Glass reinforced plastics. Measurement of hardness by means of a Barcol impressor
DS/EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique)
DS/EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)
DS/EN ISO 22088-4:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method
DS/EN 13523-6:2002 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
DS/EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method

German Institute for Standardization, indentation

DIN EN ISO 24343-1:2012-04 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007); German version EN ISO 24343-1:2012
DIN 55437-3:2021 Testing of folding cartonboard - Creasings - Part 3: Determination of the technical quality of creasings
DIN 19304:2021 Testing of corrugated board - Creasings
DIN EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007); German version EN ISO 24343-1:2012
DIN EN 1516:2000 Surfaces for sports areas - Determination of resistance to indentation; German version EN 1516:1999
DIN EN 1516:2000-09 Surfaces for sports areas - Determination of resistance to indentation; German version EN 1516:1999
DIN EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test (ISO 2815:2003); German version EN ISO 2815:2003
DIN EN ISO 2815:2003-10 Paints and varnishes - Buchholz indentation test (ISO 2815:2003); German version EN ISO 2815:2003
DIN 1996-13:1984-07 Testing of asphalt; indentation testing using a flat-ended indentor pin
DIN VDE 0472-619:1983 Testing of cables, wires and flexible cords; indentation strength VDE Specification
DIN EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008); English version of DIN EN ISO 2439:2009-05
DIN EN ISO 2439:2009-05 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008); German version EN ISO 2439:2008
DIN 51917:2002-12 Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
DIN 57472-619:1983 Testing of cables, wires and flexible cords; indentation strength [VDE Specification]
DIN EN 59:2016-06 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester; German version EN 59:2016
DIN 53579:2015-04 Testing of flexible cellular materials - Indentation test on finished parts
DIN EN ISO 2039-1:2003-06 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001); German version EN ISO 2039-1:2003
DIN 8583-5:2003-09 Manufacturing processes forming under compressive conditions - Part 5: Indentation-forming; Classification, subdivision, terms and definitions
DIN EN 1534:2020 Wood flooring and parquet - Determination of resistance to indentation - Test method
DIN EN 16974:2016-11 Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing; German version EN 16974:2016
DIN EN 1534:2020-03 Wood flooring and parquet - Determination of resistance to indentation - Test method; German version EN 1534:2020
DIN EN 12697-21:2020 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens
DIN EN ISO 868:2003-10 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003
DIN EN 12697-21:2020-05 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens; German version EN 12697-21:2020
DIN 22123:2012 Conveyor belts - Indentation rolling resistances of conveyor belts related to beltwidth - Requirements, testing
DIN EN 13523-6:2020 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
DIN EN 12697-20:2020 Bituminous mixtures - Test methods - Part 20: Indentation using cube or Marshall specimens
DIN EN 16974:2016 Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing; German version EN 16974:2016
DIN EN ISO 14577-1:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2002); German version EN ISO 14577-1:2002

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, indentation

GB/T 25898-2010(英文版) Instrumented nanoindentation test—Indentation hardness and modulus of thin film
GB/T 41605-2022 Silicon nitride materials for rolling bearing balls—Test method for fracture resistance at room temperature—Indentation fracture (IF) method
GB/T 3398-1982 Test for hardness of plastics by the ball indentation
GB/T 9275-1988 Paints and varnishes--Buchholz indentation test
GB/T 22458-2008(英文版) General rules of instrumented nanoindentation test
GB/T 9275-2008 Paint and varnishes.Buchholz indentation test
GB/T 3398.1-2008 Plastics.Determination of hardness.Part 1:Ball indentation method
GB/T 42665-2023 Test method for spherical indentation strength of porous ceramics
GB/T 24179-2023 Indentation Strain Method for Determination of Residual Stress of Metallic Materials
GB/T 24179-2009 Metallic materials.Residual stress determination.The indentation strain-gage method
GB/T 24523-2009 Test method for rapid indentation (Brinell)hardness testing of metallic materials
GB/T 24179-2009(英文版) Metallic materials—Residual stress determination—The indentation straingage method
GB/T 37782-2019(英文版) "Metallic materials—Indentation test—Determination of strength,hardness and stressstrain curve"
GB/T 2411-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer(shore hardness)

Lithuanian Standards Office , indentation

LST EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)
LST EN 1516-2000 Surfaces for sports areas - Determination of resistance to indentation
LST EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
LST EN 1534-2011 Wood flooring - Determination of resistance to indentation - Test method
LST EN 59-2000 Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
LST EN ISO 2039-1:2004 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)
LST EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
LST EN ISO 868:2004 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
LST EN 13523-6-2002 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
LST EN ISO 22088-4:2007 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006)

AENOR, indentation

UNE-EN ISO 24343-1:2012 Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007)
UNE 103407:2005 "Wheel impression" test in soils.
UNE-EN 1516:2000 SURFACES FOR SPORTS AREAS - DETERMINATION OF RESISTANCE TO INDENTATION
UNE-EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
UNE-EN 1534:2011 Wood flooring - Determination of resistance to indentation - Test method
UNE-EN ISO 2039-1:2003 Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)
UNE-EN ISO 2439:2009 Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
UNE-EN ISO 868:2003 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
UNE-EN 13523-6:2003 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)

American Society for Testing and Materials (ASTM), indentation

ASTM F1914-07(2011) Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM B648-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-78(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM B648-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM F1914-05 Standard Test Method for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM F1914-07 Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM D2583-07 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM F1914-06 Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM F1914-18 Standard Test Method for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM F1914-17 Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
ASTM B648-10(2015)e1 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
ASTM C730-98(2008) Standard Test Method for Knoop Indentation Hardness of Glass
ASTM C730-98(2021) Standard Test Method for Knoop Indentation Hardness of Glass
ASTM D2091-96(2017) Standard Test Method for Print Resistance of Lacquers
ASTM D1474-98(2002) Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM D1474-98 Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM E2546-15(2023) Standard Practice for Instrumented Indentation Testing
ASTM E384-99 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-08a Standard Test Method for Microindentation Hardness of Materials
ASTM E384-05 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-07a Standard Test Method for Microindentation Hardness of Materials
ASTM E384-07 Standard Test Method for Microindentation Hardness of Materials
ASTM C849-88(2011) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
ASTM C849-88(2006) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
ASTM D1474-98(2008) Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM D1474/D1474M-13(2023) Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM D1474/D1474M-13(2018) Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM E384-22 Standard Test Method for Microindentation Hardness of Materials
ASTM E384-17 Standard Test Method for Microindentation Hardness of Materials
ASTM D1474/D1474M-13 Standard Test Methods for Indentation Hardness of Organic Coatings
ASTM D531-89(1999) Standard Test Method for Rubber Property-Pusey and Jones Indentation
ASTM C730-98 Standard Test Method for Knoop Indentation Hardness of Glass
ASTM C730-98(2003) Standard Test Method for Knoop Indentation Hardness of Glass
ASTM E103-12 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
ASTM D531-00(2010) Standard Test Method for Rubber Property-Pusey and Jones Indentation
ASTM E103-17 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
ASTM C849-88(1999) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
ASTM C1327-15(2019) Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM C1326-13(2023) Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C730-98(2013) Standard Test Method for Knoop Indentation Hardness of Glass
ASTM C849-88(2020) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
ASTM B578-21 Standard Test Method for Microindentation Hardness of Electroplated Coatings
ASTM C1327-99 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM C1326-03 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C1326-08 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C1326-99 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C1327-03 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM C1326-08e1 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C1327-08 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM E2347-11 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E2285-08 Standard Guide for Examination of Mechanical Checkwriter Impressions
ASTM E384-08 Standard Test Method for Microindentation Hardness of Materials
ASTM C1326-13 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM C1327-15 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
ASTM C849-88(2016) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
ASTM C1326-13(2018) Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
ASTM A881/A881M-23 Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete
ASTM B933-09 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
ASTM B933-04 Standard Test Method for Microindentation Hardness of Powder Metallurgy (P/M) Materials
ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM E103-84(1996) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM E103-84(2002) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E3246-21 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials
ASTM E103-84(1996)e1 Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E3246-22 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials
ASTM D531-15 Standard Test Method for Rubber Property&x2014;Pusey and Jones Indentation
ASTM B647-84(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM D531-00(2005) Standard Test Method for Rubber Property-Pusey and Jones Indentation
ASTM D531-00 Standard Test Method for Rubber Property-Pusey and Jones Indentation
ASTM F2749-09 Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Assembly
ASTM B933-20 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
ASTM D2583-06 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM B647-10 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM B933-14 Standard Test Method for Microindentation Hardness of Powder Metallurgy 40;PM41; Materials
ASTM E2347-05 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E2347-04 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E2347-16 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM B647-23 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM E2347-21 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM C661-98 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C661-06 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C661-06(2011) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM A833-17 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM D2583-95(2001)e1 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-95 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM C661-15(2022) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM A833-19 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM B647-10(2016) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM E110-82(2002) Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM E110-82(1997)e2 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM B647-84(2000) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D6264/D6264M-07 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM E110-10 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ASTM D6264/D6264M-12 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM C661-15 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM B724-00 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM B724-00(2006) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument
ASTM E2287-08 Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text

U.S. Military Regulations and Norms, indentation

ARMY A-A-54465-1991 SYRINGE KIT, DENTAL IMPRESSION AND IRRIGATING

NO-SN, indentation

NS 3504-1975 Flooring - Indentation - Short-time test

(U.S.) Ford Automotive Standards, indentation

FORD FLTM EU-BO 054-1-2001 INDENTATION HARDNESS TEST FOR PLASTICS
FORD FLTM EU-BO 054-01-2001 INDENTATION HARDNESS TEST FOR PLASTICS
FORD FLTM BO 013-02-2000 INDENTATION TEST FOR FLEXIBLE POLYURETHANE FOAM
FORD FLTM BO 013-2-2000 INDENTATION TEST FOR FLEXIBLE POLYURETHANE FOAM
FORD FLTM BO 111-1-2001 INDENTATION TEST FOR CRASH PADS (Replaces FLTM BO 011-01)
FORD FLTM EU-BO 051-05-2001 INDENTATION HARDNESS TEST FOR POLYURETHANE FOAMED PARTS
FORD FLTM BO 111-01-2001 INDENTATION TEST FOR CRASH PADS Replaces FLTM BO 011-01 [Replaced: FORD FLTM BO 011-01]
FORD FLTM BO 111-2-2001 TEST FOR INDENTATION AND RECOVERY (Replaces FLTM BO 011-02, FLTM EU-BN 020-01, FLTM EU-BO 011-02)
FORD WSS-M1A341-A11-2009 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M1A341-A1
FORD WSS-M1A341-A12-2009 STEEL, SHEET, DENT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M1A341-A1
FORD FLTM BN 015-06-2001 LOAD INDENTATION TEST FOR FLEXIBLE CELLULAR FOAMS

YU-JUS, indentation

JUS G.S2.625-1982 Plastics. Determination of enov iron mental stress cracking (ESC). Ball or pin inpression method
JUS D.A1.033-1979 Testing of wood. Determination ofresistance to impact indentation
JUS G.S2.143-1986 Rubber. Determination of hardness by the ball indentation method (IRHD)
JUS G.S2.526-1984 Plastics and ebonite. Determination of hardness by the ball indentation method
JUS G.S2.525-1984 Plastics. Determination of indentation hardness by means of a durometer (Shore hardness)
JUS G.S2.125-1986 Rubber. Determination of Indentation hardness of a durometer (hardness Shore A and D)
JUS G.S2.527-1984 Plastics. Determination of hardness by the ball indentation method. Rockwell hardness
JUS M.B6.722-1985 Bulkhead lead-in elbovv for tube unions with indenting ferrule. Shape and dimensions
JUS M.B6.726-1985 Tube fittings andunions with indenting ferrule. Pressuregaugeconnectingnipple. Shape and dimensions
JUS M.B6.725-1985 Tube fittings andunionswith indenting ferrule. K-type tee. Shape and dimensions
JUS M.B6.724-1985 Tube fittingsandunionswith indenting ferrule. Reducing nipple. Shape and dimensions

Professional Standard - Light Industry, indentation

QB/T 1169-1991 PYQ type flat creasing and cutting machine
QB 3694-1999 Technical specification for labor safety of die-cutting machine

CZ-CSN, indentation

CSN 67 3074-1985 Paints and varnishes. Indentation test
CSN 64 0619-1981 Plastics etermination of hardness by, tlie balí ndenLation method
CSN ISO 2815:1993 Paints and vamishes. Buchholz indentation test
CSN 64 5440-1981 Determination of hardness y indentation techniques f flexible cellular materials
CSN 72 2348-1983 Testing of caulking compounds for building purposes. Indentation hardness of elastomeric sealants by means of durometer by Shore a
CSN 64 4515-1970 Fabric base laminated wound tubes 515
CSN 62 1431-1993 Rubber, plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)

Japanese Industrial Standards Committee (JISC), indentation

JIS R 6213:2006 Depressed center wheels with fabric reinforcement
JIS R 2506:1985 Testing method for cone penetration of refractory mortars
JIS C 5018:2023 Evaluation method of flexible printed wiring boards for creasing and expanding processes
JIS R 1760:2016 Test method for fracture resistance of fine ceramics at room temperature by indentation fracture (IF) method

CEN - European Committee for Standardization, indentation

EN ISO 14577-1:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method
EN ISO 14577-3:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks
EN ISO 14577-2:2002 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines
PREN 1534-2019 Wood flooring - Determination of resistance to indentation (Brinell) - Test method
PREN 12697-21-2018 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens
PREN 12697-20-2018 Bituminous mixtures - Test methods - Part 20: Indentation using cube or Marshall specimens

SE-SIS, indentation

SIS 92 35 05-1974 Floorings. Determination of indentation. Short-time test
SIS SS 92 35 06-1984 Floorings - Determination of indentation - Long-time test
SIS 18 16 53-1973 Paints. Determination of resistance to indentation of sand putty
SIS SS-ISO 2815:1989 Paints and varnishes — Buchholz indenta- tion test
SIS 16 92 12-1975 Flexible cellular materials. Hardness testing by indentation
SIS SS 16 13 53-1984 Plastics — Determination of hardness by the ball indentation method — Part 2: Rockwell hardness

TR-TSE, indentation

TS 2480-1976 Wood - Determination of Resistance to Impact Indentation
TS 2706-1977 FLEXIBLE CELLULAR MATERIALS HARD NESS TESTING BY INDENTATION TECHNIQUES
TS 2401-1976 PLATICS AND EBON?TE — DETERMINATION OF HARDNESS BY THE BALL INDENTATION METHOD

Indonesia Standards, indentation

SNI 13-6176-1999 Determination of hardness index of rock by indentation test
SNI ISO 2039-1:2011 Plastics - Determination of hardness - Part 1: Ball indentation method

Professional Standard - Public Safety Standards, indentation

GA/T 822-2009 Indented marks electrostatic developing apparatus technical requirement
GA/T 1445-2017 Technical specification for electrostatic visualization of indented writing in forensic science

RU-GOST R, indentation

GOST 21323-1975 Abrasive tool hardnees measurement by cone indentation
GOST 19202-1980 Abrasive tool. Hardness measurement by ball indentation
GOST 28868-1990 Non-ferrous metals and alloys. Hardness measurement by shock indentation method
GOST 24621-2015 Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness)
GOST R ISO 7619-2-2009 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 2. IRHD pocket meter method of measurement
GOST R 56232-2014 Determination of ?stress-strain? diagram in the course of ball instrumental indentation. General requirements
GOST R 57172-2016 Technical diagnostics. Determination of surface residual stresses by method of instrumental indentation. General requirements
GOST 18661-1973 Steel. Method for measurement of hardness by shock indentation
GOST R 56794-2015 Polymer composites. Method for determination of damage resistance to concentrated quasi-static indentation force
GOST R ISO 7619-1-2009 Rubber, vulcanized or thermoplastic. Determination of indentation hardness. Part 1. Durometer method of measurement (Shore hardness)

未注明发布机构, indentation

DIN EN ISO 3678:1995 Varnishes and paints test for imprint resistance
BS EN 433:1994(1999) Resilient floor coverings — Determination of residual indentation after static loading

National Metrological Verification Regulations of the People's Republic of China, indentation

JJG 369-1993 Verification Regulation of Plastic Ball Indentation Hardness Testing Machine
JJG 2091-1995 Verification Scheme of Measuring Instruments for Plastic Ball Indentation Hardness

PL-PKN, indentation

PN C89030-01-1993 Plastices Determination of hardness Bali indentation method
PN-EN 13523-6-2020-12 E Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)

Professional Standard - Machinery, indentation

JB/T 7410-2010 Specification for the ball indentation hardness testers of plastics
JB/T 7410-1994 Specifications for Plastic Ball Indentation Hardness Tester

GM Europe, indentation

GME 4925-2003 Depth of Indentation for Coverings and Insulation

American National Standards Institute （ANSI), indentation

ANSI/TAPPI T465 sp-2010 Static creasing of paper for water vapor transmission tests
ANSI/ASTM E103:1984 Method for Rapid Indentation Hardness Testing of Metallic Materials
ANSI/ASTM E110:1982 Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

PT-IPQ, indentation

NP ISO 7619:2001 Rubber Determination od indentation hardness by means of packet hardness meters

Professional Standard - Forestry, indentation

LY/T 2152-2013 Test method of resistance to impact indentation of wood

GM Daewoo, indentation

GMKOREA EDS-T-7410-2011

Professional Standard - Petroleum, indentation

SY/T 0526.5-1993 Coal tar enamel overlay enamel indentation determination

BE-NBN, indentation

NBN T 46-003-1977 Flexible cellular materials - Hardness testinq by indentation techni-ques
NBN T 46-003-1983 Polymeric materials, cellular flexible - Détermination of hardness (indentation technique)
NBN T 31-002-1976 Vulcanized rubbers - indentation hardness by means of a Shore duro-meter
NBN-EN 433-1994 Resilient floor coverings - Determination of residual indentation after static loading

RO-ASRO, indentation

STAS 8643-1970 PLASTICS Determination of identation hardness by means of a dnrometer Shore
STAS SR ISO 868:1995 Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness)

ES-AENOR, indentation

National Metrological Technical Specifications of the People's Republic of China, indentation

JJF 1363-1995 Technical specification for operation of plastic ball indentation hardness benchmark

AT-ON, indentation

ONORM B 5204-1973 Organic floor coverings; Indentation test with a plane indenter
ONORM C 9433 Teil.1-1982 Testing of elastomers; determination of ball indentation hardness (IRHD) of soft rubber
ONORM C 9433 Teil.2-1982 Testing of elastomers; determination of ball indentation hardness (IRHD) of soft rubber; nricro hardness fest

Society of Automotive Engineers (SAE), indentation

SAE J2704-2005 Tire Normal Force/Deflection and Gross Footprint Dimension Test
SAE J2704-2010 Tire Normal Force/Deflection and Gross Footprint Dimension Test

ZA-SANS, indentation

SANS 7619:2003 Rubber - Determination of indentation hardness by means of pocket hardness meters
SANS 2313:2008 Textile fabrics - Determination of the recovery from creasing of the horizontally folded specimen by measuring the angle of recovery

SAE - SAE International, indentation

SAE J2704-2018 Tire Normal Force/Deflection and Gross Footprint Dimension Test
SAE J2704-2017 Tire Normal Force/Deflection and Gross Footprint Dimension Test

工业和信息化部/国家能源局, indentation

JB/T 12721-2016 Technical specifications for in-situ nanoindentation/scratch tester for solid materials
JB/T 13225-2017 In-situ tensile-indentation composite mechanical property testing system for solid materials

Professional Standard - Textile, indentation

FZ/T 90080.1-1995 Test method for ball indentation hardness of plastic pick knots for looms
FZ/T 90079.1-1995 Test method for ball indentation hardness of nitrile pick knots for cotton looms
FZ/T 90078.1-1995 Test method for ball indentation hardness of nitrile buffer rings for cotton looms

ES-UNE, indentation

UNE-EN 59:2016 Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
UNE-EN 16974:2016 Conveyor belts - Indentation rolling resistance related to belt width - Requirements, testing (Endorsed by AENOR in November of 2016.)
UNE-EN 1534:2021 Wood flooring and parquet - Determination of resistance to indentation - Test method
UNE-EN 12697-21:2022 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens
UNE-EN 13523-6:2021 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)

Professional Standard - Building Materials, indentation

JC/T 2174-2013 Fine ceramics (advanced ceramics, advanced technical ceramics).Rockwell indentation test for evaluation of adhesion of ceramic coatings

IT-UNI, indentation

UNI EN 12697-21-2021 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens

Group Standards of the People's Republic of China, indentation

T/HDGXH 034-2023 Laser ranging method for high-temperature pressure indentation testing of wire and cable insulation and sheath

VN-TCVN, indentation

TCVN 4502-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer (Shore hardness)

TH-TISI, indentation

TIS 2245-2005 Plastics and ebonite.determination of indentation hardness by means of a durometer (shore hardness)

Professional Standard - Ferrous Metallurgy, indentation

YB/T 4285-2012 Standard test method for indentation hardness of metallic materials by portable hardness testers

BELST, indentation

STB 2495-2017 Non-destructive testing. Determination of physical and mechanical properties of structural materials by indentation methods

国家能源局, indentation

SY/T 4113.6-2019 Test methods for performance of pipeline anti-corrosion coatings Part 6: Indentation hardness test

国家市场监督管理总局、中国国家标准化管理委员会, indentation

GB/T 39635-2020 Metallic materials—Measurement of indentation tensile properties and residual stresses by an instrumented indentation test
GB/T 37900-2019 Test method of hardness and fracture toughness for ultra-thin glass—Low-load vickers hardness indentation method

FI-SFS, indentation

SFS-ISO 868 E:1986 This standard is approved in English

Professional Standard - Electricity, indentation

DL/T 2220-2021 Technical regulations for instrumented indentation method testing of mechanical properties of metal materials in power stations

Professional Standard - Energy, indentation

NB/T 20421.2-2017 The condition monitoring methods of cable important to safety in nuclear power plants.Part 2:Indenter modulus

Malaysia Standards, indentation

MS 133 Pt.E9-2000 Methods of test for paints and varnishes:Part E9:Buchholz indentation test (ISO 2851:1973,MOD)

IN-BIS, indentation

IS 13360 Pt.5/Sec.12-1992

CH-SNV, indentation

SN EN 13523-6-2020 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)