ZH
RU
ES

superconducting+

superconducting+, Total:500 items.

In the international standard classification, superconducting+ involves: Conducting materials, Electricity. Magnetism. Electrical and magnetic measurements, Electrical wires and cables, Testing of metals, Products of non-ferrous metals, Equipment for processing of minerals, Nuclear energy engineering, Electronic components in general, Vocabularies, Electrical accessories, Thermodynamics and temperature measurements, Electrical engineering in general, Semiconductor devices, Transformers. Reactors, Water quality, Measurement of fluid flow, Magnetic materials, Non-ferrous metals, Insulation, Materials for the reinforcement of composites, Environmental protection, Farming and forestry, Education, Power transmission and distribution networks, Welding, brazing and soldering.


International Electrotechnical Commission (IEC), superconducting+

  • IEC TR 61788-20:2014 Superconductivity - Part 20: Superconducting wires - Categories of practical superconducting wires - General characteristics and guidance
  • IEC 61788-5:2013 Superconductivity.Part 5: Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • IEC 61788-5:2000 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement; Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • IEC 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
  • IEC 61788-12:2013 Superconductivity.Part 12: Matrix to superconductor volume ratio measurement.Copper to non-copper volume ratio of Nb<(Index)3>Sn composite superconducting wires
  • IEC 61788-22-3:2022 Superconductivity - Part 22-3: Superconducting strip photon detector - Dark count rate
  • IEC 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
  • IEC 61788-23:2018 Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors
  • IEC 61788-7:2002 Superconductivity - Part 7: Electronic characteristic measurements; Surface resistance of superconductors at microwave frequencies
  • IEC 61788-7:2006 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • IEC 61788-4:2001 Superconductivity - Part 4: Residual resistance ratio measurement; Residual resistance ratio of Nb-Ti composite superconductors
  • IEC 61788-23:2021 RLV Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of cavity-grade Nb superconductors
  • IEC 61788-22-1:2017 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors
  • IEC 61788-23:2021 Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of cavity-grade Nb superconductors
  • IEC 61788-6:2000 Superconductivity - Part 6: Mechanical properties measurement; Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • IEC 61788-1:2006 Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors
  • IEC 61788-11:2011 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb<(Index)3>Sn composite superconductors
  • IEC 61788-1:1998 Superconductivity - Part 1: Critical current measurement - DC critical current of Cu/Nb-Ti composite superconductors
  • IEC 61788-6:2008 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • IEC 61788-4:2007 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • IEC 61788-4:2011 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • IEC 61788-6:2011 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • IEC 61788-7:2020 RLV Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies
  • IEC 61788-7:2020 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies
  • IEC 61788-2:1999 Superconductivity - Part 2: Critical current measurement - DC critical current of Nb<(Index)3>Sn composite superconductors
  • IEC 61788-15:2011 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
  • IEC 61788-4:2020 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • IEC 61788-4:2020 RLV Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • IEC 61788-26:2020 Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors
  • IEC 61788-4:2016 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • IEC 61788-2:2006 Superconductivity - Part 2: Critical current measurement - DC critical current of Nb<(Index)3>Sn composite superconductors
  • IEC 61788-13:2012 Superconductivty - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
  • IEC 60050-815:2000 International Electrotechnical Vocabulary - Part 815: Supraconductivity
  • IEC 60050-815:2015 International Electrotechnical Vocabulary - Part 815: Superconductivity
  • IEC 61788-11:2003 Superconductivity - Part 11: Residual resistance ratio measurement; Residual resistance ratio of Nb<(Index)3>Sn composite superconductors
  • IEC 61788-10:2006 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method
  • IEC 61788-3:2000 Superconductivity - Part 3: Critical current measurement; DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors
  • IEC 61788-24:2018 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
  • IEC 61788-17:2013 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
  • IEC 61788-17:2021 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
  • IEC 61788-17:2021 RLV Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
  • IEC 61788-13:2003 Superconductivity - Part 13: AC loss measurements; Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
  • IEC 61788-18:2013 Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
  • IEC 61788-3:2006 Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
  • IEC 60050-815:2015/AMD1:2016 International electrotechnical vocabulary - Part 815: Superconductivity; Amendment 1
  • IEC 61788-8:2010 Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
  • IEC 60050-815:2015/AMD2:2020 Amendment 2 - International Electrotechnical Vocabulary (IEV) - Part 815: Superconductivity
  • IEC 60050-815:2015/AMD3:2021 International Electrotechnical Vocabulary (IEV) - Part 815: Superconductivity; Amendment 3
  • IEC 61788-25:2018 Superconductivity - Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires

British Standards Institution (BSI), superconducting+

  • PD IEC/TR 61788-20:2014 Superconductivity. Superconducting wires. Categories of practical superconducting wires. General characteristics and guidance
  • BS EN 61788-5:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • BS EN 61788-5:2001 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • BS EN 61788-5:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • BS PD IEC/TR 61788-20:2014 Superconductivity. Superconducting wires. Categories of practical superconducting wires. General characteristics and guidance
  • BS EN 61788-21:2015 Superconductivity. Superconducting wires. Test methods for practical superconducting wires. General characteristics and guidance
  • BS EN 61788-12:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • BS EN 61788-12:2002 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • BS EN 61788-12:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • BS EN IEC 61788-22-3:2022 Superconductivity - Superconducting strip photon detector. Dark count rate
  • BS EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
  • BS EN 61788-22-1:2017 Superconductivity. Superconducting electronic devices. Generic specification for sensors and detectors
  • BS EN 61788-14:2010 Superconductivity. Part 14: Superconducting power devices. General requirements for characteristic tests of current leads designed for powering superconducting devices
  • BS EN 61788-2:1999 Superconductivity - Critical current measurement - DC critical current of Nb3Sn composite superconductors
  • BS EN 61788-7:2002 Superconductivity - Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • BS EN 61788-7:2007 Superconductivity - Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • BS EN 61788-11:2003 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
  • BS EN 61788-4:2001 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • BS EN 61788-2:2007 Superconductivity - Critical current measurement - D.C. critical current of Nb3Sn composite superconductors
  • BS EN 61788-11:2011 Superconductivity. Residual resistance ratio Measurement. Residual resistance ratio of Nb3Sn composite superconductors
  • BS EN 61788-1:2007 Superconductivity - Critical current measurement - D.C. critical current of Nb-Ti composite superconductors
  • BS EN 61788-6:2008 Superconductivity. Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • BS EN 61788-4:2011 Superconductivity. Residual resistance ratio Measurement. Residual resistance ratio of Nb-Ti composite superconductors
  • BS EN 61788-6:2001 Superconductivity - Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • BS EN 61788-13:2012 Superconductivity. AC loss measurements. Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
  • BS EN IEC 61788-7:2020 Superconductivity - Electronic characteristic measurements. Surface resistance of high-temperature superconductors at microwave frequencies
  • BS EN 61788-16:2013 Superconductivity. Electronic characteristic measurements. Power-dependent surface resistance of superconductors at microwave frequencies
  • BS EN 61788-15:2011 Superconductivity. Electronic characteristic measurements. Intrinsic surface impedance of superconductor films at microwave frequencies
  • BS EN 61788-10:2006 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method
  • BS EN 61788-7:2006 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • BS EN 61788-4:2007 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • BS EN 61788-6:2011 Superconductivity. Mechanical properties measurement. Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • BS EN IEC 61788-26:2020 Superconductivity - Critical current measurement. DC critical current of RE-Ba-Cu-O composite superconductors
  • BS EN IEC 61788-4:2020 Superconductivity - Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • BS EN 61788-4:2016 Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • BS EN 61788-19:2014 Superconductivity. Mechanical properties measurement. Room temperature tensile test of reacted Nb3Sn composite superconductors
  • 21/30436977 DC BS EN IEC 61788-22-3. Superconductivity. Part 22-3. Superconducting strip photon detector. dark count rate
  • BS EN IEC 61788-23:2021 Tracked Changes. Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of cavity-grade Nb superconductors
  • 19/30390197 DC BS EN 61788-23. Superconductivity. Part 23. Residual resistance ratio measurement. Residual resistance ratio of Nb superconductors
  • 19/30402599 DC BS EN IEC 61788-23. Superconductivity. Part 23. Residual resistance ratio measurement. Residual resistance ratio of Nb superconductors
  • 18/30382796 DC BS EN 61788-4. Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • BS EN 61788-3:2003 Superconductivity - Critical current measurement - DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors
  • BS EN 61788-3:2001 Superconductivity - Critical current measurement - DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors
  • 18/30370111 DC BS EN 61788-7. Superconductivity. Part 7. Electronic characteristic measurements. Surface resistance of superconductors at microwave frequencies
  • BS EN 61788-17:2013 Superconductivity. Electronic characteristic measurements. Local critical current density and its distribution in large-area superconducting films
  • BS EN IEC 61788-24:2018 Superconductivity - Critical current measurement. Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
  • BS EN 61788-13:2003 Superconductivity - AC loss measurements - Magnetometer methods for hysteresis loss in Cu/Nb-Ti multifilamentary composites
  • BS EN IEC 61788-17:2021 Tracked Changes. Superconductivity. Electronic characteristic measurements. Local critical current density and its distribution in large-area superconducting films
  • 23/30473276 DC BS EN IEC 61788-23. Superconductivity - Part 23. Residual resistance ratio measurement. Residual resistance ratio of cavity-grade Nb superconductors
  • 18/30363361 DC BS EN 61788-26. Superconductivity. Part 26. Critical current measurement. DC critical current of RE-Ba-Cu-O composite superconductors
  • BS EN 61788-18:2014 Superconductivity. Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
  • BS EN 61788-10:2003 Superconductivity - Critical temperature measurement - Critical temperature of Nb-Ti, Nb3Sn, and Bi-system oxide composite superconductors by a resistance method
  • BS EN 61788-10:2002 Superconductivity - Critical temperature measurement - Critical temperature of Nb-Ti, Nb3Sn, and Bi-system oxide composite superconductors by a resistance method
  • BS EN 61788-3:2006 Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
  • BS EN 61788-18:2013 Superconductivity. Mechanical properties measurement. Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
  • BS EN 61788-8:2003 Superconductivity - AC loss measurements - Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method
  • 19/30391554 DC BS EN 61788-17. Superconductivity. Part 17. Electronic characteristic measurements. Local critical current density and its distribution in large-area superconducting films
  • BS EN 61788-8:2010 Superconductivity. AC loss measurements. Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
  • BS EN IEC 61788-25:2018 Superconductivity - Mechanical properties measurement. Room temperature tensile test on REBCO wires
  • BS EN ISO 17279-1:2018 Welding. Micro joining of 2nd generation high temperature superconductors - General requirements for the procedure
  • BS EN ISO 23702-1:2018 Welding. Micro joining of 2nd generation high temperature superconductors. Qualification for welding and testing personnel
  • BS EN ISO 17279-2:2018 Welding. Micro joining of 2nd generation high temperature superconductors - Qualification for welding and testing personnel

Korean Agency for Technology and Standards (KATS), superconducting+

  • KS C IEC 61788-5:2002 Superconductivity-Part 5:Matrix to superconductor volume ratio measurement-Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • KS C IEC 61788-5-2016(2021) Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
  • KS C IEC 61788-5:2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
  • KS D 0067-2002 Glossary of terms relating to superconductors
  • KS C IEC 61788-21:2020 Superconductivity — Part 21: Superconducting wires — Test methods for practical superconducting wires — General characteristics and guidance
  • KS D 0067-2002(2022) Glossary of terms relating to superconductors
  • KS C IEC 61788-9-2016(2021) Superconductivity – Part 9: Measurements for bulk high temperature superconductors – Trapped flux density of large grain oxide superconductors
  • KS C IEC 61788-9:2016 Superconductivity – Part 9: Measurements for bulk high temperature superconductors – Trapped flux density of large grain oxide superconductors
  • KS C IEC 61788-6:2002 Superconductivity - Part 6 : Mechanical properties measurement -Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • KS C 6111-2-2005 Superconductivity－Critical temperature measurement－Critical temperature of Nb-Ti, Nb3Sn, and Bi-system composite superconductors by a magnetic method using an ac susceptometer
  • KS D 0067-2002(2017) Glossary of terms relating to superconductors
  • KS C IEC 61788-14:2020 Superconductivity — Part 14: Superconducting power devices —General requirements for characteristic tests of current leads designed for powering superconducting devices
  • KS C 6111-1-2005 Superconductivity－Critical temperature measurement－Critical temperature of Nb-Ti, Nb3Sn, and Bi-system compositesuperconductors by a magnetic method using a SQUID magnetometer
  • KS C IEC 61788-11-2005(2015) Superconductivity－Part 11：Residual resistance ratio measurement－Residual resistance ratio of Nb3Sn composite superconductors
  • KS C IEC 61788-4:2003 Superconductivity－Part 4：Residual resistance ratio measurement－Residual resistance ratio of Nb－Ti composite superconductors
  • KS C IEC 61788-11:2005 Superconductivity－Part 11：Residual resistance ratio measurement－Residual resistance ratio of Nb3Sn composite superconductors
  • KS C IEC 61788-6:2017 Superconductivity - Part 6 : Mechanical properties measurement -Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • KS C IEC 61788-4-2017(2022) Superconductivity－Part 4：Residual resistance ratio measurement－Residual resistance ratio of Nb－Ti composite superconductors
  • KS C IEC 61788-4:2017 Superconductivity－Part 4：Residual resistance ratio measurement－Residual resistance ratio of Nb－Ti composite superconductors
  • KS C 6111-3-2007 Electronic characteristic measurements－Intrinsic surface impedance of high-TC superconductor films at microwave frequencies
  • KS C IEC 61788-1:2009 Superconductivity－Part 1：Critical current measurement－DC critical current of Cu/Nb-Ti composite superconductors
  • KS D 0406-2004 Superconductivity－Test method－Part 1：Critical current－Section 1：DC critical current of Cu/Nb-­Ti composite superconductors
  • KS C IEC 61788-6-2017(2022) Superconductivity - Part 6 : Mechanical properties measurement -Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • KS C IEC 61788-1-2009(2020) Superconductivity－Part 1：Critical current measurement－DC critical current of Cu/Nb-Ti composite superconductors
  • KS C IEC 61788-19-2016(2021) Superconductivity – Part 19: Mechanical properties measurement – Room temperature tensile test of reacted Nb3Sn composite superconductors
  • KS C IEC 61788-24:2021 Superconductivity — Part 24: Critical current measurement — Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
  • KS C IEC 61788-26:2022 Superconductivity — Part 26: Critical current measurement —DC critical current of RE-Ba-Cu-O composite superconductors
  • KS C IEC 61788-19:2016 Superconductivity – Part 19: Mechanical properties measurement – Room temperature tensile test of reacted Nb3Sn composite superconductors
  • KS C IEC 61788-16:2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies
  • KS C IEC 60050-815:2009 International Electrotechnical Vocabulary－Part 815：Superconductivity
  • KS C IEC 60050-815:2020 International Electrotechnical Vocabulary－Part 815：Superconductivity
  • KS D 0406-1999 Superconductivity－Test method－Part 1：Critical current－Section 1：DC critical current of Cu/Nb-­Ti composite superconductors
  • KS C IEC 61788-3:2016 Superconductivity－Part 3：Critical current measurement－DC critical current of Ag－sheathed Bi－2212 and Bi－2223 oxide superconductors
  • KS C IEC 61788-3:2002 Superconductivity-Part 3:Critical current measurement-DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors
  • KS C IEC 61788-3-2016(2021) Superconductivity－Part 3：Critical current measurement－DC critical current of Ag－sheathed Bi－2212 and Bi－2223 oxide superconductors
  • KS C IEC 61788-17:2020 Superconductivity — Part 17: Electronic characteristic measurements — Local critical current density and its distribution in large-area superconducting films
  • KS C 6111-2-2005(2020) Superconductivity－Critical temperature measurement－Critical temperature of Nb-Ti, Nb3Sn, and Bi-system composite superconductors by a magnetic method using an ac susceptometer
  • KS C 6111-1-2005(2020) Superconductivity－Critical temperature measurement－Critical temperature of Nb-Ti, Nb3Sn, and Bi-system compositesuperconductors by a magnetic method using a SQUID magnetometer
  • KS C 6111-5-2008 Measurements of the thickness of superconductor films at microwave frequencies
  • KS C 6111-5-2008(2018) Measurements of the thickness of superconductor films at microwave frequencies
  • KS C IEC 61788-10-2017(2022) Superconductivity－Part 10：Critical temperature measurement－Critical temperature of Nb－Ti, Nb3Sn, and Bi－system oxide composite superconductors by a resistance method
  • KS C IEC 61788-18:2020 Superconductivity — Part 18: Mechanical properties measurement — Room temperature tensile test of Ag-and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
  • KS C 6111-1997(2002) TEST METHODS OF D.C. CRITICAL CURRENT OF Cu/Nb-Ti COMPOSITE SUPERCONDUCTORS
  • KS C 6111-6-2009(2020) Measurement method for the DC critical current of superconducting power cables
  • KS C IEC 61788-10:2003 Superconductivity－Part 10：Critical temperature measurement－Critical temperature of Nb－Ti, Nb3Sn, and Bi－system oxide composite superconductors by a resistance method
  • KS C IEC 61788-10:2017 Superconductivity－Part 10：Critical temperature measurement－Critical temperature of Nb－Ti, Nb3Sn, and Bi－system oxide composite superconductors by a resistance method
  • KS C 6111-6-2009 Measurement method for the DC critical current of superconducting power cables
  • KS C 6111-2004 TEST METHODS OF D.C. CRITICAL CURRENT OF Cu/Nb-Ti COMPOSITE SUPERCONDUCTORS
  • KS C 6111-4-2007 Homogeneity in the surface resistance of large high-Tc superconductor films at microwave frequencies
  • KS C 6111-4-2007(2017) Homogeneity in the surface resistance of large high-Tc superconductor films at microwave frequencies
  • KS C IEC 61788-8:2020 Superconductivity — Part 8: AC loss measurements —Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup c
  • KS C 6111-4-2007(2022) Homogeneity in the surface resistance of large high-Tc superconductor films at microwave frequencies

Association Francaise de Normalisation, superconducting+

  • NF C31-888-5*NF EN 61788-5:2014 Superconductivity - Part 5 : matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • NF EN 61788-5:2014 Supraconductivité - Partie 5 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/supraconducteur des fils en composite supraconducteur Cu/Nb-Ti
  • NF C31-888-21*NF EN 61788-21:2015 Superconductivity - Part 21 : superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance
  • NF EN 61788-21:2015 Supraconductivité - Partie 21 : fils supraconducteurs - Méthodes d'essai pour fils supraconducteurs à usage pratique - Caractéristiques générales et lignes directrices
  • NF EN 61788-12:2014 Supraconductivité - Partie 12 : mesure du rapport volumique matrice/supraconducteur - Rapport volumique cuivre/non-cuivre des fils en composite supraconducteur Nb3Sn
  • NF EN IEC 61788-22-3:2022 Supraconductivité - Partie 22-3 : détecteur de photons à bande supraconductrice - Taux de comptage en obscurité
  • NF C31-888-9*NF EN 61788-9:2005 Superconductivity - Part 9 : measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors.
  • NF EN 61788-9:2005 Supraconductivité - Partie 9 : mesures pour supraconducteurs haute température massifs - Densité de flux résiduel des oxydes supraconducteurs à gros grains
  • NF C31-888-14*NF EN 61788-14:2014 Superconductivity - Part 14 : supercondcuting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
  • NF EN 61788-14:2014 Supraconductivité - Partie 14 : dispositifs supraconducteurs de puissance - Exigences générales pour les essais de caractéristiques d'amenées de courant conçus pour alimenter des dispositifs supraconducteurs
  • NF EN 61788-22-1:2017 Supraconductivité - Partie 22-1 : dispositifs électroniques supraconducteurs - Spécification générique pour capteurs et détecteurs
  • NF C31-888-23*NF EN IEC 61788-23:2018 Superconductivity - Part 23 : residual resistance ratio measurement - Residual resistance ratio of Nb superconductors
  • NF C31-888-12:2003 Supraconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires.
  • NF C31-888-12*NF EN 61788-12:2014 Superconductivity - Part 12 : matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • NF C31-888-2:2001 Superconductivity - Part 2 : critical current measurement - DC critical current of Nb3Sn composite superconductors.
  • NF C31-888-2*NF EN 61788-2:2007 Superconductivity - Part 2 : critical current measurement - DC critical current of Nb3Sn composite superconductors
  • NF C31-888-7*NF EN IEC 61788-7:2020 Superconductivity - Part 7 : electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • NF C31-888-7*NF EN 61788-7:2006 Superconductivity - Part 7 : electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • NF C31-888-23*NF EN IEC 61788-23:2021 Superconductivity - Part 23 : residual resistance ratio measurement - Residual resistance ratio of cavity-grade Nb superconductors
  • NF EN 61788-1:2007 Supraconductivité - Partie 1 : mesure du courant critique - Courant critique continu de supraconducteurs en composite Nb-Ti
  • NF EN IEC 61788-23:2021 Supraconductivité - Partie 23 : mesurage du rapport de résistance résiduelle - Rapport de résistance résiduelle des supraconducteurs de Nb à cavités
  • NF C01-815:2001 Electrotechnical Vocabulary - Chapter 515 : supraconductivity.
  • NF C31-888-7:2003 Superconductivity - Part 7 : electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies.
  • NF C31-888-6:2006 Superconductivity - Part 6 : mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors.
  • NF C31-888-4:2012 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors.
  • NF C31-888-1*NF EN 61788-1:2007 Superconductivity - Part 1 : critical current measurement - DC critical current of Nb-Ti composite superconductors.
  • NF EN 61788-2:2007 Supraconductivité - Partie 2 : mesure du courant critique - Courant critique continu des supraconducteurs composites Nb3Sn
  • NF EN 61788-6:2012 Supraconductivité - Partie 6 : mesure des propriétés mécaniques - Essai de traction à température ambiante des supraconducteurs composites de Cu/Nb-Ti
  • NF C31-888-1:2002 Superconductivity - Part 1 : critical current measurement - DC critical current of Cu/Nb-Ti composite superconductors.
  • NF C31-888-15*NF EN 61788-15:2012 Superconductivity - Part 15 : electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
  • NF C31-888-10*NF EN 61788-10:2006 Superconductivity - Part 10 : critical temperature measurement - Critical temperature of composite superconductors by a resistance method
  • NF C31-888-4*NF EN IEC 61788-4:2020 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • NF EN 61788-19:2014 Supraconductivité - Partie 19 : mesure des propriétés mécaniques - Essai de traction à température ambiante des supraconducteurs composites de Nb0Sn mis en réaction
  • NF EN 61788-15:2012 Supraconductivité - Partie 15 : mesures de caractéristiques électroniques - Impédance de surface intrinsèque de films supraconducteurs aux fréquences micro-ondes
  • NF C31-888-6*NF EN 61788-6:2012 Superconductivity - Part 6 : mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • NF C31-888-4*NF EN 61788-4:2016 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • NF C31-888-13*NF EN 61788-13:2013 Superconductivity - Part 13 : AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
  • NF C31-888-16*NF EN 61788-16:2013 Superconductivity - Part 16 : electric characteristic measurements - Power dependent surface resistance of superconductors at microwave frequencies
  • NF C31-888-19*NF EN 61788-19:2014 Superconductivity - Part 19 : mechanical properties measurement - Room temperature tensile test of reacted Nb0Sn composite superconductors
  • NF EN IEC 61788-26:2020 Supraconductivité - Partie 26 : mesurage du courant critique - Courant critique continu des composites supraconducteurs de RE-Ba-Cu-O
  • NF C31-888-11:2003 Superconductivity - Part 11 : residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors.
  • NF C31-888-11:2011 Superconductivity - Part 11 : residual resistance ratio measurment - Residual resistance ratio of Nb3Sn composite superconductors.
  • NF EN IEC 61788-4:2020 Supraconductivité - Partie 4 : mesurage du rapport de résistance résiduelle - Rapport de résistance résiduelle des composites supraconducteurs de Nb-Ti et de Nb3Sn
  • NF EN 61788-16:2013 Supraconductivité - Partie 16 : mesures de caractéristiques électroniques - Résistance de surface des supraconducteurs aux hyperfréquences en fonction de la puissance
  • NF EN 61788-10:2006 Supraconductivité - Partie 10 : mesure de la température critique - Température critique des composites supraconducteurs par une méthode par résistance
  • NF EN IEC 61788-7:2020 Supraconductivité - Partie 7 : mesurages des caractéristiques électroniques - Résistance de surface des supraconducteurs haute température critique aux hyperfréquences
  • NF C31-888-3:2006 Superconductivity - Part 3 : critical current measurement - DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors.
  • NF C31-888-17*NF EN 61788-17:2013 Superconductivity - Part 17 : electric characteristic measurements - Local critical current density and its distribution in large-area superconducting films
  • NF C31-888-17*NF EN IEC 61788-17:2021 Superconductivity - Part 17 : electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
  • NF EN IEC 61788-17:2021 Supraconductivité - Partie 17 : mesurages de caractéristiques électroniques - Densité de courant critique local et sa distribution dans les films supraconducteurs de grande surface
  • NF C31-888-3*NF EN 61788-3:2007 Superconductivity - Part 3 : critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors.
  • NF C31-888-24*NF EN IEC 61788-24:2018 Superconductivity - Part 24 : critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
  • NF EN 61788-13:2013 Supraconductivité - Partie 13 : mesure des pertes en courant alternatif - Méthodes de mesure par magnétomètre des pertes par hystérésis dans les composites multi-filamentaires supraconducteurs
  • NF C31-888-8:2003 Superconductivity - Part 8 : AC loss measurements - Total AC loss measurement of Cu/Nb To composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method.
  • NF C31-888-18*NF EN 61788-18:2014 Superconductivity - Part 18 : mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
  • NF EN IEC 61788-24:2018 Supraconductivité - Partie 24 : mesurage du courant critique - Courant critique retenu après double flexion à température ambiante des fils supraconducteurs Bi-2223 avec gaine Ag
  • NF EN 61788-18:2014 Supraconductivité - Partie 18 : mesure des propriétés mécaniques - Essai de traction à température ambiante des supraconducteurs composites Bi-2223 et Bi-2212 avec gaine Ag et/ou en alliage d'Ag
  • NF EN 61788-3:2007 Supraconductivité - Partie 3 : mesure du courant critique - Courant critique continu des oxydes supraconducteurs Bi-2212 et Bi-2223 avec gaine Ag et/ou en alliage d'Ag
  • NF C31-888-10:2003 Superconductivity - Part 10 : critical temperature measurement - Critical temperature of Nb-Ti, Nb3Sn, and Bi-system oxide composite superconductors by a resistance method.
  • NF EN 61788-8:2015 Supraconductivité - Partie 8 : mesures des pertes en courant alternatif - Mesure de la perte totale en courant alternatif des fils supraconducteurs ronds exposés à un champ magnétique alternatif transverse par une méthode par bobines de détection
  • NF C31-888-25*NF EN IEC 61788-25:2018 Superconductivity - Part 25 : mechanical properties measurement - Room Temperature Tensile Test on REBCO Wires
  • NF C31-800:1989 Wires for electrical machinery and apparatus. Measurement of the characteristics of a niobiom-titanium multifilamentary superconducting wire without insulation.
  • NF C31-888-8*NF EN 61788-8:2015 Superconductivity - Part 8 : AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
  • NF EN ISO 17279-3:2021 Soudage - Micro-assemblage des supraconducteurs à haute température de deuxième génération - Partie 3 : méthode d'essai des assemblages

Danish Standards Foundation, superconducting+

  • DS/EN 61788-5:2001 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • DS/EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • DS/EN 61788-9:2005 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
  • DS/EN 61788-12:2002 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • DS/EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • DS/EN 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
  • DS/EN 61788-2:2007 Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors
  • DS/EN 61788-7:2007 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • DS/EN 61788-11:2011 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
  • DS/EN IEC 61788-23:2021 Superconductivity – Part 23: Residual resistance ratio measurement – Residual resistance ratio of cavity-grade Nb superconductors
  • DS/EN 61788-4:2011 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • DS/EN 61788-1:2007 Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors
  • DS/EN 61788-6:2011 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • DS/EN 61788-10:2007 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method
  • DS/EN 61788-15:2012 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
  • DS/EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
  • DS/EN 61788-13:2013 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
  • DS/EN IEC 61788-17:2021 Superconductivity – Part 17: Electronic characteristic measurements – Local critical current density and its distribution in large-area superconducting films
  • DS/EN 61788-17:2013 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
  • DS/EN 61788-3:2006 Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
  • DS/EN 61788-8:2013 Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
  • DS/ISO 17279-3:2021 Welding – Micro joining of second generation high temperature superconductors – Part 3: Test methods for joints

KR-KS, superconducting+

  • KS C IEC 61788-5-2016 Superconductivity－Part 5：Matrix to superconductor volume ratio measurement－Copper to superconductor volume ratio of Cu/Nb－Ti composite superconductors
  • KS C IEC 61788-21-2020 Superconductivity — Part 21: Superconducting wires — Test methods for practical superconducting wires — General characteristics and guidance
  • KS C IEC 61788-9-2016 Superconductivity – Part 9: Measurements for bulk high temperature superconductors – Trapped flux density of large grain oxide superconductors
  • KS C IEC 61788-14-2020 Superconductivity — Part 14: Superconducting power devices —General requirements for characteristic tests of current leads designed for powering superconducting devices
  • KS C IEC 61788-4-2017 Superconductivity－Part 4：Residual resistance ratio measurement－Residual resistance ratio of Nb－Ti composite superconductors
  • KS C IEC 61788-6-2017 Superconductivity - Part 6 : Mechanical properties measurement -Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • KS C IEC 61788-24-2021 Superconductivity — Part 24: Critical current measurement — Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
  • KS C IEC 61788-26-2022 Superconductivity — Part 26: Critical current measurement —DC critical current of RE-Ba-Cu-O composite superconductors
  • KS C IEC 61788-19-2016 Superconductivity – Part 19: Mechanical properties measurement – Room temperature tensile test of reacted Nb3Sn composite superconductors
  • KS C IEC 61788-16-2020 Superconductivity — Part 16: Electronic characteristic measurements — Power-dependent surface resistance of superconductors at microwave frequencies
  • KS C IEC 60050-815-2020 International Electrotechnical Vocabulary－Part 815：Superconductivity
  • KS C IEC 61788-3-2016 Superconductivity－Part 3：Critical current measurement－DC critical current of Ag－sheathed Bi－2212 and Bi－2223 oxide superconductors
  • KS C IEC 61788-17-2020 Superconductivity — Part 17: Electronic characteristic measurements — Local critical current density and its distribution in large-area superconducting films
  • KS C IEC 61788-18-2020 Superconductivity — Part 18: Mechanical properties measurement — Room temperature tensile test of Ag-and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
  • KS C IEC 61788-10-2017 Superconductivity－Part 10：Critical temperature measurement－Critical temperature of Nb－Ti, Nb3Sn, and Bi－system oxide composite superconductors by a resistance method
  • KS C IEC 61788-8-2020 Superconductivity — Part 8: AC loss measurements —Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup c

ES-UNE, superconducting+

  • UNE-EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (Endorsed by AENOR in October of 2013.)
  • UNE-EN 61788-21:2015 Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance (Endorsed by AENOR in August of 2015.)
  • UNE-EN 61788-9:2005 Superconductivity -- Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors (Endorsed by AENOR in November of 2005.)
  • UNE-EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (Endorsed by AENOR in November of 2013.)
  • UNE-EN IEC 61788-22-3:2022 Superconductivity - Part 22-3: Superconducting strip photon detector - dark count rate (Endorsed by Asociación Española de Normalización in November of 2022.)
  • UNE-EN 61788-14:2010 Superconductivity -- Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices (Endorsed by AENOR in November of 2010.)
  • UNE-EN IEC 61788-23:2018 Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors (Endorsed by Asociación Española de Normalización in November of 2018.)
  • UNE-EN 61788-22-1:2017 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors (Endorsed by Asociación Española de Normalización in December of 2017.)
  • UNE-EN 61788-6:2011 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors (Endorsed by AENOR in November of 2011.)
  • UNE-EN IEC 61788-23:2021 Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of cavity-grade Nb superconductors (Endorsed by Asociación Española de Normalización in November of 2021.)
  • UNE-EN IEC 61788-7:2020 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies (Endorsed by Asociación Española de Normalización in June of 2020.)
  • UNE-EN 61788-19:2014 Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors (Endorsed by AENOR in March of 2014.)
  • UNE-EN IEC 61788-4:2020 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (Endorsed by Asociación Española de Normalización in June of 2020.)
  • UNE-EN 61788-15:2011 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies (Endorsed by AENOR in March of 2012.)
  • UNE-EN IEC 61788-26:2020 Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors (Endorsed by Asociación Española de Normalización in October of 2020.)
  • UNE-EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies (Endorsed by AENOR in May of 2013.)
  • UNE-EN 61788-2:2007 Superconductivity -- Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors (IEC 61788-2:2006). (Endorsed by AENOR in April of 2007.)
  • UNE-EN 61788-1:2007 Superconductivity -- Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors. (IEC 61788-1:2006). (Endorsed by AENOR in April of 2007.)
  • UNE-EN 61788-13:2012 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (Endorsed by AENOR in November of 2012.)
  • UNE-EN 61788-17:2013 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films (Endorsed by AENOR in May of 2013.)
  • UNE-EN IEC 61788-17:2021 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films (Endorsed by Asociación Española de Normalización in July of 2021.)
  • UNE-EN 61788-18:2013 Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors (Endorsed by AENOR in January of 2014.)
  • UNE-EN IEC 61788-24:2018 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires (Endorsed by Asociación Española de Normalización in October of 2018.)
  • UNE-EN 61788-3:2006 Superconductivity -- Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors (IEC 61788-3:2006) (Endorsed by AENOR in November of 2006.)
  • UNE-EN 61788-8:2010 Superconductivity -- Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method (Endorsed by AENOR in March of 2011.)
  • UNE-EN IEC 61788-25:2018 Superconductivity - Part 25: Mechanical properties measurement - Room Temperature Tensile Test on REBCO Wires (Endorsed by Asociación Española de Normalización in December of 2018.)

European Committee for Electrotechnical Standardization（CENELEC）, superconducting+

  • EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • EN 61788-21:2015 Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance
  • EN 61788-5:2001 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • EN 61788-9:2005 Superconductivity Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors
  • EN 61788-12:2013 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • EN IEC 61788-22-3:2022 Superconductivity - Part 22-3: Superconducting strip photon detector - Dark count rate
  • EN 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
  • EN 61788-7:2006 Superconductivity Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • EN 61788-2:2007 Superconductivity Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors
  • EN 61788-11:2011 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
  • EN 61788-22-1:2017 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors
  • EN 61788-4:2011 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductor
  • EN 61788-4:2016 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • EN 61788-1:2007 Superconductivity Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors
  • EN IEC 61788-7:2020 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies
  • EN 61788-6:2011 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • EN IEC 61788-26:2020 Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors
  • EN IEC 61788-4:2020 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies
  • EN 61788-19:2014 Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors
  • EN 61788-10:2006 Superconductivity Part 10: Critical temperature measurement Critical temperature of composite superconductors by a resistance method
  • EN IEC 61788-17:2021 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
  • EN 61788-17:2013 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
  • EN IEC 61788-24:2018 Superconductivity - Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires
  • EN 61788-3:2006 Superconductivity Part 3: Critical current measurement - DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors
  • EN 61788-18:2013 Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors
  • EN 61788-8:2010 Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method

Japanese Industrial Standards Committee (JISC), superconducting+

  • JIS H 7304:2002 Superconductivity -- Part 5: Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • JIS H 7304:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • JIS H 7313:2007 Superconductivity -- Measurements for bulk high temperature superconductors -- Trapped flux density of large grain oxide superconductors
  • JIS H 7314:2013 Superconductivity -- Superconducting power devices -- General requirements for characteristic tests of current leads designed for powering superconducting devices
  • JIS H 7308:2017 Superconductivity -- Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • JIS H 7308:2006 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement -- Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • JIS H 7309:2012 Superconductivity -- Critical temperature measurement -- Critical temperature of composite superconductors by a resistance method
  • JIS H 7306:2012 Superconductivity -- Residual resistance ratio measurement -- Residual resistance ratio of Nb-Ti composite superconductors
  • JIS H 7307:2005 Superconductivity -- Part 7: Electoronic characteristic measurements -- Surface resistance of superconductors at microwave frequencies
  • JIS H 7312:2007 Superconductivity -- Residual resistance ratio measurement -- Residual resistance ratio of Nb3Sn composite superconductors
  • JIS H 7307:2010 Superconductivity -- Part 7: Electronic characteristic measurements -- Surface resistance of superconductors at microwave frequencies
  • JIS H 7306:2018 Superconductivity -- Residual resistance ratio measurement -- Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
  • JIS H 7302:2000 Superconductivity -- Part 2: Critical current measurement -- DC critical current of Nb3Sn composite superconductors
  • JIS H 7301:1997 Superconductivity -- Test method -- Part 1: Critical current -- Section 1: DC critical current of Cu/Nb-Ti composite superconductors
  • JIS H 7306:2005 Superconductivity --Part 4: Residual resistance ratio measurement -- Residual resistance ratio of Nb-Ti composite superconductors
  • JIS H 7302:2009 Superconductivity -- Part 2: Critical current measurement -- DC critical current of Nb3Sn composite superconductors
  • JIS H 7311:2018 Superconductivity -- AC loss measurements -- Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
  • JIS H 7005:1999 Terms and definitions related to superconductivity
  • JIS H 7303:2002 Superconductivity -- Part 6: Mechanical properties measurement -- Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • JIS H 7301:2009 Superconductivity -- Part 1: Critical current measurement -- DC critical current of Nb-Ti composite superconductors
  • JIS H 7303:2013 Superconductivity -- Part 6: Mechanical properties measurement -- Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • JIS H 7005:1991 Glossary of terms relating to superconductors
  • JIS H 7305:2003 Superconductivity -- Part 3: Critical current measurement -- DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors
  • JIS H 7310:2006 Superconductivity -- AC loss measurements -- Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method
  • JIS H 7005:2005 International Electrotechnical Vocabulary -- Part 815: Superconductivity
  • JIS H 7310:2013 Superconductivity -- AC loss measurements -- Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
  • JIS H 7305:2010 Superconductivity -- Part 3: Critical current measurement -- DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors
  • JIS H 7309:2006 Superconductivity -- Part 10: Critical temperature measurement -- Critical temperature of Nb-Ti, Nb3Sn, and Bi-system oxide composite superconductors by a resistance method

Lithuanian Standards Office , superconducting+

  • LST EN 61788-5-2002 Superconductivity. Part 5: Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors (IEC 61788-5:2000)
  • LST EN 61788-12-2003 Superconductivity. Part 12: Matrix to superconductor volume ratio measurement. Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2002)
  • LST EN 61788-9-2005 Superconductivity. Part 9: Measurements for bulk high temperature superconductors. Trapped flux density of large grain oxide superconductors (IEC 61788-9:2005)
  • LST EN 61788-12-2014 Superconductivity -- Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013)
  • LST EN 61788-14-2010 Superconductivity -- Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices (IEC 61788-14:2010)
  • LST EN 61788-7-2007 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies (IEC 61788-7:2006)
  • LST EN 61788-2-2007 Superconductivity - Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors (IEC 61788-2:2006)
  • LST EN 61788-11-2011 Superconductivity -- Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors (IEC 61788-11:2011)
  • LST EN 61788-1-2007 Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors (IEC 61788-1:2006)
  • LST EN 61788-4-2011 Superconductivity -- Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2011)
  • LST EN 61788-6-2011 Superconductivity -- Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors (IEC 61788-6:2011)
  • LST EN 61788-10-2007 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method (IEC 61788-10:2006)
  • LST EN 61788-15-2012 Superconductivity -- Part 15: Electronic characteristic measurements -- Intrinsic surface impedance of superconductor films at microwave frequencies (IEC 61788-15:2011)
  • LST EN 61788-13-2013 Superconductivity -- Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (IEC 61788-13:2012)
  • LST EN IEC 61788-17:2021 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films (IEC 61788-17:2021)
  • LST EN 61788-3-2006 Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors (IEC 61788-3:2006)
  • LST EN 61788-8-2011 Superconductivity -- Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method (IEC 61788-8:2010)

Professional Standard - Machinery, superconducting+

工业和信息化部/国家能源局, superconducting+

  • JB/T 13002-2017 Superconducting magnetic separator
  • JB/T 12908-2016 Technical conditions of cold storage superconducting box-type transfer equipment for cold chain logistics

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, superconducting+

  • GB/T 30537-2014 Superconductivity―Measurements for bulk high temperature superconductors―Trapped flux density of large grain oxide superconductors
  • GB/T 2900.100-2017 Electrotechnical terminology—Superconductivity
  • GB/T 33655-2017 Superconducting power devices—General requirements for characteristic tests of current leads designed for powering superconducting devices
  • GB/T 22586-2018 Electronic characteristic measurements—Surface resistance of superconductors at microwave frequencies

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, superconducting+

  • GB/T 25897-2010 Superconductivity:Residual resistance ratio measurement of Nb-Ti composite superconductors
  • GB/T 13811-2003 Electrotechnical terminology Superconductivity
  • GB/T 31522-2015 Matrix to superconductor volume ratio measurement.Copper to non-copper volume ratio of Nb<下标3>Sn composite superconducting wires
  • GB/T 22587-2008 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
  • GB/T 22587-2017 Matrix to superconductor volume ratio measurement.Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
  • GB/T 41985-2022 230MeV~250MeV superconducting proton cyclotron
  • GB/T 21115-2007(英文版) Measurement for levitation force of bulk oxide superconductor
  • GB/T 42747-2023 Dark count rate of superconducting strip photon detector
  • GB/T 21115-2007 Measurement for levitation force of bulk oxide superconductor
  • GB/T 22586-2008 Measurements of surface resistance of high temperature superconductor thin films at microwave frequencies
  • GB/T 25080-2010 Niobium-Titannium alloy billet,bar and rod for superconducting application
  • GB/T 25080-2022 Specification for niobium-titanium alloy billets and bars for superconducting applications
  • GB/T 21546-2008 Critical current measurement.DC critical current of Nb -Ti composite superconductors
  • GB/T 31780-2015 Critical temperature measurement.Critical temperature of composite superconductors by a resistance method
  • GB/T 31527-2015 Mechanical properties measurement.Room temperature tensile test of NbTi/Cu composite superconductors
  • GB/T 28871-2012 Critical current measurement.DC critical current of Nb3Sn composite superconductors
  • GB/T 18502-2001 The DC critical current measurement for Ag or Ag-alloy sheathed bismuthal oxide superconductor
  • GB/T 17711-1999 The DC electric resistance test method for the critical temperature Tc of a YBa2Cu3O7-δ superconducting thin film

Anhui Provincial Standard of the People's Republic of China, superconducting+

  • DB34/T 3425-2019 Liquid Helium Cooling Method for Superconducting Cyclotron Low-Temperature Superconducting Magnet
  • DB34/T 4255-2022 Superconducting magnet manufacturing process management specification
  • DB34/T 3178-2018 Specification for radiation shielding of superconducting cyclotrons
  • DB34/T 4254-2022 Superconducting Cyclotron Installation Management Specifications
  • DB34/T 3573-2019 Specifications for design of low temperature transmission lines for superconducting technology
  • DB34/T 2843-2017 High temperature superconducting stack manufacturing process and test method
  • DB34/T 3571-2019 Electrical test method for insulating layer of large superconducting magnet
  • DB34/T 3423-2019 Design Criteria for Central Region of Superconducting Cyclotron
  • DB34/T 3241-2018 Automatic Exercise Method of Superconducting Cyclotron Resonant Cavity
  • DB34/T 3569-2019 Superconducting Isochronous Cyclotron Magnetic Field Shimming Regulations
  • DB34/T 3572-2019 Technical specification for vacuum pressure impregnation of large superconducting magnets
  • DB34/T 3766-2020 Technical management requirements for superconducting cyclotron water cooling system
  • DB34/T 3111-2018 Low carbon steel technical requirements for main magnet of superconducting cyclotron
  • DB34/T 3113-2018 Design criteria of superconducting cyclotron transport line degrader
  • DB34/T 3426-2019 Installation specification for superconducting cyclotron beam delivery system
  • DB34/T 3768-2020 Superconducting Cyclotron Rotary Therapy Room Technical Management Requirements
  • DB34/T 3767-2020 Superconducting Cyclotron RF Resonator Technology Management Requirements
  • DB34/T 3424-2019 Superconducting cyclotron electrostatic deflection plate test technical requirements
  • DB34/T 3240-2018 Testing method of voltage distribution in superconducting cyclotron resonator cavity
  • DB34/T 3179-2018 Design Criteria for Rotating Rack of Superconducting Cyclotron Transport Line
  • DB34/T 3592-2020 General procedure for finite element analysis of superconducting cyclotron electromagnetics
  • DB34/T 3114-2018 Design Criteria for Beamstoppers in Transport Lines of Superconducting Cyclotrons
  • DB34/T 3239-2018 Design criteria for second and fourth pole electromagnets in superconducting cyclotron transport line
  • DB34/T 3110-2018 Measuring method of plane magnetic field in air gap of main magnet of superconducting cyclotron
  • DB34/T 3591-2020 General Design Guidelines for Superconducting Cyclotron Proton Therapy Control System
  • DB34/T 1564-2011 The DC High Voltage Experimental Method for the Solid Insualtion on Superconducting Cable under Paschen Condition
  • DB34/T 3593-2020 Performance Test Method of Superconducting Cyclotron RF Low Level Control System
  • DB34/T 3568-2019 Superconducting cyclotron transport line magnet power supply technical requirements and test methods
  • DB34/T 3112-2018 Magnetic Field Measurement Method of Superconducting Cyclotron Penning Internal Ion Source Test Platform

CENELEC - European Committee for Electrotechnical Standardization, superconducting+

  • EN 61788-12:2002 Superconductivity Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires
  • EN IEC 61788-23:2018 Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors
  • EN 61788-7:2002 Superconductivity Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies
  • EN 61788-11:2003 Superconductivity Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
  • EN 61788-2:1999 Superconductivity Part 2: Critical current measurement - DC critical current of Nb3Sn composite superconductors
  • EN 61788-4:2001 Superconductivity Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • EN 61788-4:2007 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
  • EN 61788-1:1998 Superconductivity Part 1: Critical Current Measurement DC Critical Current of Cu/Nb-Ti Composite Superconductors
  • EN 61788-10:2002 Superconductivity Part 10: Critical temperature measurement - Critical temperature of Nb-Ti@ Nb3Sn@ and Bi-system oxide composite superconductors by a resistance method
  • EN 61788-6:2008 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • EN 61788-6:2001 Superconductivity Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors
  • EN 61788-15:2011 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies
  • EN 61788-13:2012 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites
  • EN 61788-3:2001 Superconductivity Part 3: Critical current measurement - DC critical current of Ag-sheathed Bi-2212 and Bi-2223 oxide superconductors
  • EN 61788-8:2003 Superconductivity Part 8: AC loss measurements - Total AC loss measurement of Cu/Nb-Ti composite superconducting wires exposed to a transverse alternating magnetic field by a pickup coil method
  • EN IEC 61788-25:2018 Superconductivity - Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires

German Institute for Standardization, superconducting+

  • DIN EN 61788-5:2014 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires (IEC 61788-5:2013); German version EN 61788-5:2013
  • DIN EN 61788-21:2016 Superconductivity - Part 21: Superconducting wires - Test methods for practical superconducting wires - General characteristics and guidance (IEC 61788-21:2015); German version EN 61788-21:2015
  • DIN EN 61788-11:2012 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb<(Index)3>Sn composite superconductors (IEC 61788-11:2011); German version EN 61788-11:2011
  • DIN EN 61788-9:2006 Superconductivity - Part 9: Measurements for bulk high temperature superconductors - Trapped flux density of large grain oxide superconductors (IEC 61788-9:2005); German version EN 61788-9:2005
  • DIN EN 61788-12:2014 Superconductivity - Part 12: Matrix to superconductor volume ratio measurement - Copper to non-copper volume ratio of Nb3Sn composite superconducting wires (IEC 61788-12:2013); German version EN 61788-12:2013
  • DIN EN 61788-4:2012 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2011); German version EN 61788-4:2011
  • DIN EN 61788-6:2012 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors (IEC 61788-6:2011); German version EN 61788-6:2011
  • DIN EN 61788-4:2008 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2007); German version EN 61788-4:2007
  • DIN EN 61788-14:2011 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices (IEC 61788-14:2010); German version EN 61788-14:2010
  • DIN EN 61788-7:2007 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of superconductors at microwave frequencies (IEC 61788-7:2006); German version EN 61788-7:2006
  • DIN EN 61788-2:2007 Superconductivity - Part 2: Critical current measurement - DC critical current of Nb<(Index)3>Sn composite superconductors (IEC 61788-2:2006); German version EN 61788-2:2007
  • DIN EN 61788-1:2007 Superconductivity - Part 1: Critical current measurement - DC critical current of Nb-Ti composite superconductors (IEC 61788-1:2006); German version EN 61788-1:2007
  • DIN EN 61788-3:2007 Superconductivity - Part 3: Critical current measurement - DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors (IEC 61788-3:2006); German version EN 61788-3:2006
  • DIN EN 61788-10:2007 Superconductivity - Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method (IEC 61788-10:2006); German version EN 61788-10:2006
  • DIN EN IEC 61788-7:2021 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies (IEC 61788-7:2020); German version EN IEC 61788-7:2020
  • DIN EN 61788-15:2012 Superconductivity - Part 15: Electronic characteristic measurements - Intrinsic surface impedance of superconductor films at microwave frequencies (IEC 61788-15:2011); German version EN 61788-15:2011
  • DIN EN 61788-22-1:2018 Superconductivity - Part 22-1: Superconducting electronic devices - Generic specification for sensors and detectors (IEC 61788-22-1:2017); German version EN 61788-22-1:2017
  • DIN EN 61788-6:2008 Superconductivity - Part 6: Mechanical properties measurement - Room temperature tensile test of Cu/Nb-Ti composite superconductors (IEC 61788-6:2008); German version EN 61788-6:2008
  • DIN EN 61788-16:2013 Superconductivity - Part 16: Electronic characteristic measurements - Power-dependent surface resistance of superconductors at microwave frequencies (IEC 61788-16:2013); German version EN 61788-16:2013
  • DIN EN 61788-19:2014 Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors (IEC 61788-19:2013); German version EN 61788-19:2014
  • DIN EN IEC 61788-4:2021 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (IEC 61788-4:2020); German version EN IEC 61788-4:2020
  • DIN EN 61788-4:2017 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (IEC 61788-4:2016); German version EN 61788-4:2016
  • DIN EN 61788-17:2013 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films (IEC 61788-17:2013); German version EN 61788-17:2013
  • DIN EN 61788-13:2013 Superconductivity - Part 13: AC loss measurements - Magnetometer methods for hysteresis loss in superconducting multifilamentary composites (IEC 61788-13:2012); German version EN 61788-13:2012
  • DIN EN 61788-18:2014 Superconductivity - Part 18: Mechanical properties measurement - Room temperature tensile test of Ag- and/or Ag alloy-sheathed Bi-2223 and Bi-2212 composite superconductors (IEC 61788-18:2013); German version EN 61788-18:2013
  • DIN EN 61788-8:2011 Superconductivity - Part 8: AC loss measurements - Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method (IEC 61788-8:2010); German version EN 61788

Professional Standard - Electron, superconducting+

RU-GOST R, superconducting+

IET - Institution of Engineering and Technology, superconducting+

PL-PKN, superconducting+

  • PN-EN 61788-22-1-2018-03 P Superconductivity -- Part 22-1: Superconducting electronic devices -- Generic specification for sensors and detectors
  • PN-EN IEC 61788-7-2020-12 E Superconductivity -- Part 7: Electronic characteristic measurements -- Surface resistance of high-temperature superconductors at microwave frequencies (IEC 61788-7:2020)
  • PN-EN IEC 61788-26-2021-03 E Superconductivity - Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors (IEC 61788-26:2020)
  • PN-EN IEC 61788-4-2020-12 E Superconductivity -- Part 4: Residual resistance ratio measurement -- Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (IEC 61788-4:2020)

国家市场监督管理总局、中国国家标准化管理委员会, superconducting+

  • GB/T 40296-2021 Practical superconducting wires—Twist pitch measurement method of Nb-Ti and Nb3Sn composite superconductors
  • GB/T 39325-2020 Specification for radiation shielding of superconducting proton cyclotron
  • GB/T 39722-2020 Superconducting electronic devices—Generic specification for sensors and detectors
  • GB/T 38842-2020 Categories and test methods of practical superconducting wires—General characteristics and guidance

Group Standards of the People's Republic of China, superconducting+

  • T/HEBQIA 073-2022 Superconducting magnets for Czochralski monocrystalline silicon
  • T/CI 086-2022 Superconducting Vehicle Traction Transformer Test Specification
  • T/NTAS 011-2022 Superconducting magnetic coagulation equipment for drinking water treatment
  • T/JSEE 009-2020 Specifications for Engineering Design of High Temperature Superconducting DC Cables
  • T/BMCA 011-2022 Technical requirements and test methods for superconducting magnetic guiding system
  • T/BMCA 008-2022 Technical requirements and test methods for superconducting communication receiver
  • T/AVS 001-2020 Design criteria of superconducting cyclotron glow discharge cleaning system
  • T/BMCA 010-2022 Technical requirements and test methods for underwater target superconducting magnetic detection system
  • T/BMCA 009-2022 Technical requirements and test methods for superconducting measuring system of target’s magnetic characters
  • T/CEC 112-2016 Preventive test procedure for saturated iron core type high temperature superconducting current limiting reactor
  • T/CES 067-2021 Magnetic circuit test method for magnetization critical current uniformity of high temperature superconducting tapes
  • T/ANS 003-2020 Electrochemical treatment method of niobium-titanium superconducting cable for magnetic confinement nuclear fusion device

未注明发布机构, superconducting+

  • BS EN 61788-15:2011(2012) Superconductivity Part 15 : Electronic characteristic measurements – Intrinsic surface impedance of superconductor films at microwave frequencies

AENOR, superconducting+

  • UNE 21302-815:2001 Electrotechnical vocabulary. Part 815: Superconductivity.
  • UNE-EN 61788-10:2007 Superconductivity -- Part 10: Critical temperature measurement - Critical temperature of composite superconductors by a resistance method (IEC 61788-10:2006).

PT-IPQ, superconducting+

  • NP 2626-815-1999 International Electrotechnical Vocabulary Chapter815: Superconductivity

工业和信息化部, superconducting+

  • YB/T 4667-2018 Ultra high thermal conductivity graphite block
  • YS/T 1535-2022 Method for determination of recrystallization rate of niobium-titanium alloy rods for superconducting purposes

AT-OVE/ON, superconducting+

  • OVE EN IEC 61788-7:2021 Superconductivity - Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies ((IEC 61788-7:2020) EN IEC 61788-7:2020) (german version)
  • OVE EN IEC 61788-4:2021 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (( IEC 61788-4:2020) EN IEC 61788-4:2020) (german version)

Professional Standard - Education, superconducting+

  • JY/T 007-1996 General Rules of Superconducting Vein Fourier Transform NMR Spectroscopy
  • JY/T 0578-2020 Superconducting Pulse Fourier Transform NMR Spectroscopy Test Method General Rules

National Metrological Technical Specifications of the People's Republic of China, superconducting+

  • JJF 1448-2014 Calibration Specification for Superconducting Pulsed Fourier Transform Nuclear Magnetic Resonance Spectrometers

Hunan Provincial Standard of the People's Republic of China, superconducting+

  • DB43/T 1936-2020 Rapid detection of aflatoxin B1 by superconducting dot immunofluorescence method

American Society for Testing and Materials (ASTM), superconducting+

  • ASTM B884-11 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
  • ASTM B884-05 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
  • ASTM B884-97 Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications
  • ASTM B884-01 Standard Specification for Niobium-Titanium Alloy Billets, Bar and Rod for Superconducting Applications
  • ASTM B884-11(2019) Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications

GB-REG, superconducting+

  • REG NASA-LLIS-0520-1994 Lessons Learned ?Investment Casting Process for Producing Net-Shape, Superconducting Ceramics

  superconducting, superconducting thin film, superconducting standard, superconducting+, superconducting material, Composite superconductor, superconducting device, superconducting compound, superconducting device, organic superconductor, superconducting block, Superconductor, superconducting tc, superconducting tc, superconducting technology, superconducting+tc, superconducting material, high temperature superconductivity, high temperature superconductivity, Superconducting abroad.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved