ZH
RU
ES

range of relative standard deviation

range of relative standard deviation, Total:91 items.

In the international standard classification, range of relative standard deviation involves: Linear and angular measurements, Quality, Metrology and measurement in general, Occupational safety. Industrial hygiene, Organic chemicals, Environmental testing, Optics and optical measurements, Particle size analysis. Sieving, Water quality, Components for aerospace construction, Petroleum products in general, Gears, Lubricants, industrial oils and related products, Rubber and plastics products, Air quality, Fuels, Domestic electrical appliances in general, IT terminal and other peripheral equipment, Optoelectronics. Laser equipment, Electricity. Magnetism. Electrical and magnetic measurements.

German Institute for Standardization, range of relative standard deviation

DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN EN ISO 286-2:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013
DIN EN ISO 286-2:2019 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013) (includes Corrigendum :2013)
DIN EN ISO 11151-2:2015-12 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015); German version EN ISO 11151-2:2015

International Telecommunication Union (ITU), range of relative standard deviation

ITU-T Q.457-1989 Interregister Signalling - Range of Interregister Signalling - Specifications of Signalling Systems R1 and R2 (Study Group XI) 4 pp

American Society for Testing and Materials (ASTM), range of relative standard deviation

ASTM E2938-15 Standard Test Method for Evaluating the Relative-Range Measurement Performance of 3D Imaging Systems in the Medium Range
ASTM D7729-12 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
ASTM D7729-12(2018)e1 Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
ASTM D7298-06 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM D7298-06(2011)e1 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
ASTM E324-99 Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM E324-79(1989)e1 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM E324-16 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM E324-23 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
ASTM E1919-07 Standard Guide for Worldwide Published Standards Relating to Particle and Spray Characterization
ASTM D2777-13 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D2777-12 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D2777-03 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
ASTM F733-90(2003) Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F733-90(1997)e1 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM F733-09 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
ASTM D6352-19 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 ℃ to 700 ℃ by Gas Chromatography
ASTM D7213-15 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100&x2009;&xb0;C to 615&x2009;&xb0;C by Gas Chromatography
ASTM D6352-15 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174&x2009;&xb0;C to 700&x2009;&xb0;C by Gas Chromatography
ASTM D7213-14 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
ASTM D6352-14 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
ASTM D2777-06 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D2777-08e1 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D6352-03 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176;C by Gas Chromatography
ASTM D6352-98 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176C by Gas Chromatography
ASTM D6352-02 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176C by Gas Chromatography
ASTM D6352-04e1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176;C by Gas Chromatography
ASTM D6352-04(2009) Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176;C by Gas Chromatography
ASTM D7500-08 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oilsx2014;in Boiling Range from 100 to 735x00B0;C by Gas Chromatography
ASTM D4745-14 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene &40;PTFE&41; Molding and Extrusion Materials Using ASTM Methods
ASTM D7911-14 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
ASTM D7213-11 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615176;C by Gas Chromatography
ASTM D7398-11(2016) Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100&x2009;&xb0;C to 615&x2009;&xb0;C by Gas Chromatography
ASTM D2887-15 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D7911-19 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
ASTM F2036-00 Standard Test Method for Evaluation of Larger Area Density and Background on Electrophotographic Printers
ASTM D7500-14 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography
ASTM D7500-15 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils&x2014;in Boiling Range from 100&x2009;&xb0;C to 735&x2009;&xb0;C by Gas Chromatography
ASTM D7398-11(2021) Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 ��C to 615 ��C by Gas Chromatography
ASTM D7398-21 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
ASTM D2887-12 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D2887-13 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography
ASTM D6300-03 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
ASTM D3710-95(1999)e1 Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography
ASTM D3710-95(2009) Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography
ASTM D1826-94(1998) Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
ASTM D7096-19 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
ASTM ANS/IEC 60601.2.12:2001 Medical Electrical Equipment8212;Part 2-12; Particular Requirements for the Safety of Lung Ventilators8212;Critical Care Ventilators Approved as an American National Standard with Deviations by ASTM International
ASTM D5032-97 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
ASTM D7096-05 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
ASTM D7096-16 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography

British Standards Institution (BSI), range of relative standard deviation

BS 5702-1:2001 Guide to statistical process control (SPC) charts for variables - Charts for mean, median, range and standard deviation
BS EN ISO 286-2:1990 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS ISO TR 10064-2:1996 Code of inspection practice - Inspection related to radial composite deviations, runout, tooth thickness and backlash
BS ISO TR 10064-2:1997 Code of inspection practice. Inspection related to radial composite deviations, runout, tooth thickness and backlash
PD R061-001-2000 Safety of household and similar electrical appliances. Interpretations related to European Standards within the scope of CENELEC/TC 61
BS EN ISO 11151-2:2000 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
BS EN ISO 11151-2:2015 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range

Institute of Electrical and Electronics Engineers (IEEE), range of relative standard deviation

SMPTE ST 2085:2015 ST 2085:2015 - SMPTE Standard - Y′D′ - D′ - Color-Difference Computations for High Dynamic Range X′Y′Z′ Signals
ST 2085:2015 ST 2085:2015 - SMPTE Standard - Y′D′ - D′ - Color-Difference Computations for High Dynamic Range X′Y′Z′ Signals

Danish Standards Foundation, range of relative standard deviation

DS/EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/EN ISO 286-2/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range

PL-PKN, range of relative standard deviation

PN C99470 ArkusZ00-1974 Phyiical and chemical ?esting me?hodt of pho?ographic materia In?roduction and scope of standard
PN Z04210-01-1989 Air purify protection Tests for />-nitrophenol Introduction and scope of the standard
PN C04610-01-1990 Water and waste water Test for toxicity of pollutants to a?uatic organisms Introduction and rang? of standard

未注明发布机构, range of relative standard deviation

BS EN ISO 286-2:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts

Association Francaise de Normalisation, range of relative standard deviation

NF EN ISO 286-2:2010 Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 2 : tableaux des classes de tolérance normalisés et des écarts limites des alésages et des arbres
NF E02-100-2*NF EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts.
NF EN ISO 11151-2:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 2 : composants pour la plage spectrale infrarouge

GOSTR, range of relative standard deviation

GOST ISO 1328-1-2017 Cylindrical gears. ISO system. Flank tolerance classification. Part 1. Definitions and allowable values of deviations relevant to flanks of gear teeth

国家市场监督管理总局、中国国家标准化管理委员会, range of relative standard deviation

GB/T 1800.2-2020 Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

Lithuanian Standards Office , range of relative standard deviation

LST EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

AENOR, range of relative standard deviation

UNE-EN ISO 286-2:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

International Organization for Standardization (ISO), range of relative standard deviation

ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO 286-2:2010/cor 1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts; Technical Corrigendum 1

ES-UNE, range of relative standard deviation

UNE-EN ISO 286-2:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
UNE-EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)

European Committee for Standardization (CEN), range of relative standard deviation

EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)

RU-GOST R, range of relative standard deviation

GOST 8.412-1981 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring relative dielectric constant at frequency 1-200 MHz
GOST 8.284-1978 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means of measuring of relative dielectric constant of liquids, solid and gases at frequencies 1 - 10 GHz

CENELEC - European Committee for Electrotechnical Standardization, range of relative standard deviation

CLC/TR 50417-2003 Safety of household and similar electrical appliances Interpretations related to European Standards within the scope of CENELEC/TC 61