ZH
RU
ES

Primary Thermal Analysis Methods for Materials

Primary Thermal Analysis Methods for Materials, Total:497 items.

In the international standard classification, Primary Thermal Analysis Methods for Materials involves: Analytical chemistry, Ferroalloys, Non-ferrous metals, Welding, brazing and soldering, Ceramics, Plastics, Testing of metals, Mechanical testing, Refractories, Non-metalliferous minerals, Fuels, Insulating materials, Insulation, Protection against fire, Structures of buildings, Insulating fluids, Iron and steel products, Particle size analysis. Sieving, Company organization and management, Ferrous metals, Animal feeding stuffs, Fertilizers, Rubber and plastics products, Nuclear energy engineering, Glass, Leather technology, Materials for aerospace construction, Road vehicles in general, Crude petroleum, Pharmaceutics, Raw materials for rubber and plastics, Organic chemicals, Protective equipment, Electrical accessories, Construction materials, Paint ingredients, Water quality, Products of the chemical industry, Medical equipment, Inorganic chemicals, Electrical engineering in general, Reinforced plastics, Components for electrical equipment, Laboratory medicine, Industrial automation systems, Waxes, bituminous materials and other petroleum products, Road engineering, Sensory analysis, Processes in the food industry, Environmental testing, Semiconducting materials, METALLURGY, Textile fibres, Rubber, Heat treatment, Powder metallurgy, Optical equipment, Heat recovery. Thermal insulation, Aerospace electric equipment and systems, Test conditions and procedures in general, Packaging materials and accessories.


Korean Agency for Technology and Standards (KATS), Primary Thermal Analysis Methods for Materials

  • KS D 1790-2003 Method of chemical analysis for nickel chromium electric heating material
  • KS D 1838-2009 Methods of chemical analysis for iron chromium electric heating material
  • KS D 1790-2018 Method of chemical analysis for nickel chromium electric heating material
  • KS D 1790-1993 Methods of chemical analysis for nickel chromium electric heating material
  • KS D 1838-2014 Methods of chemical analysis for iron chromium electric heating material
  • KS D 1838-2019 Methods of chemical analysis for iron chromium electric heating material
  • KS C 2002-1998 Test method of thermal life evaluation of plastics by thermogravimetry
  • KS D 1701-2009 Determination of trace impurities in high purity gold-Matrix extraction method by heating
  • KS D 2000-2012 Methods for chemical analysis of silver brazing filler metals
  • KS D 2006-2009 Methods for chemical analysis of nickel brazing filler metals
  • KS D 2609-1993 Methods for chemical analysis of thoriated tungsten materials
  • KS D 2609-2013 Methods for chemical analysis of thoriated tungsten materials
  • KS D 2006-1984 Methods for chemical analysis of nickel brazing filler metals
  • KS D 2005-2009 Methods for chemical analysis of brass brazing filler metals
  • KS D 2007-1991 Methods for chemical analysis of copper phosphorus brazing filler metals
  • KS D 1963-2009 Methods for chemical analysis of copper nickel resistance material
  • KS D 1963-2009(2019) Methods for chemical analysis of copper nickel resistance material
  • KS D 2010-2003 Methods for chemical analysis of white metal
  • KS M 3005-2002 Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
  • KS L 3523-2006(2021) Testing methods for sieve analysis and water content of refractory materials
  • KS M 3005-2002(2022) Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
  • KS M 3706-2008(2013) Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
  • KS D 1650-2008 General rules for photoelectric emission spectrochemical analysis of metal materials
  • KS M 3536-1999
  • KS L 3416-2016 Methods for chemical analysis of refractories containing carbon and/or silicon-carbide
  • KS L 3416-2016(2021) Methods for chemical analysis of refractories containing carbon and/or silicon-carbide
  • KS F 2713-2002 Testing method for analysis of chloride in concrete and concrete raw materials
  • KS M ISO 14855-1-2013(2018) Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting condition ― Method by analysis of evolved carbon dioxide ― Part 1: General method
  • KS M ISO 2071-2002(2012) Aluminium oxide primarily used for the production of aluminium－Determination of zinc content－Flame atomic absorption method
  • KS L 3415-2006(2016) Methods for chemical analysis of refractories containing alumina and magnesia
  • KS Q ISO 13302-2007(2012) Sensory analysis－Methods for assessing modifications to the flavour of foodstuffs due to packaging
  • KS F 2713-2017(2022) Testing method for analysis of chloride in concrete and concrete raw materials
  • KS K 0828-2016 Test method for quantitative analysis of composition of blended filling materialsdown and feathers blended with polyester
  • KS M ISO 900-2003(2008) Aluminium oxide primarily used for the production of aluminium－Determination of titanium content－Diantipyrylmethane photometric method
  • KS D 1813-2003(2018) Chemical analysis of ferrous materials determination of lead in steels－Flame atomic absorption spectrometric method
  • KS C IEC 61234-2:2002 Method of test for the hydrolytic stability of electrical insulating materials－Part 2：Moulded thermosets
  • KS C IEC 60264-4-1-2004(2009) Packaging of winding wires－Part 4－1：Methods of test－Delivery spools made from thermoplastic materials
  • KS D 1943-2005 General rules for chemical analysis of tungsten and molybdenum materials for electric lamps and tubes
  • KS L 3414-2006(2021) Methods for chemical analysis of refractories containing alumina, zirconia and silica
  • KS C IEC 60695-2-12:2004 Fire hazard testing-Part 2-12:Glowing/hot-wire based test methods-Glow-wire flammability test method for materials
  • KS C IEC 60695-2-13:2004 Fire hazard testing－Part 2－13：Glowing/hot-wire based test methods－Glow-wire ignitability test method for materials
  • KS C IEC 60695-2-13-2017(2022) Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignition temperature(GWIT) test method for materials
  • KS C IEC 60695-2-12-2017(2022) Fire hazard testing — Part 2-12: Glowing/hot-wire based test methods — Glow-wire flammability index(GWFI) test method for materials

Japanese Industrial Standards Committee (JISC), Primary Thermal Analysis Methods for Materials

  • JIS H 1411:1996 Methods of chemical analysis for iron chromium electric heating material
  • JIS H 1412:1996 Methods of chemical analysis for nickel chromium electric heating material
  • JIS H 1403:1987 Methods for chemical analysis of tungsten materials
  • JIS H 1404:1987 Methods for chemical analysis of molybdenum materials
  • JIS H 1403:2001 Methods for chemical analysis of tungsten materials
  • JIS H 1404:2001 Methods for chemical analysis of molybdenum materials
  • JIS H 1411 AMD 1:2006 Methods of chemical analysis for iron chromium electric heating material (Amendment 1)
  • JIS H 1412 AMD 1:2006 Methods of chemical analysis for nickel chromium electric heating material (Amendment 1)
  • JIS K 7120:1987 Testing methods of plastics by thermogravimetry
  • JIS H 1405:1987 Methods for chemical analysis of thoriated tungsten materials
  • JIS H 1401:1987 Methods for chemical analysis of tungsten and molybdenum alloy materials
  • JIS H 1413:1996 Methods of chemical analysis for copper nickel resistance material
  • JIS R 2901:1994 Methods for chemical analysis of chrome ores for refractories
  • JIS H 1405:2001 Methods for chemical analysis of thoriated tungsten materials
  • JIS H 1405:2016 Methods for chemical analysis of thoriated tungsten materials
  • JIS K 7197:1991 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
  • JIS R 2014:1998 Methods for chemical analysis of refractories containing alumina and magnesia
  • JIS R 2251-2:2007 Test methods for thermal conductivity of refractory materials -- Part 2: Hot-wire method (parallel)
  • JIS R 2251-3:2007 Test methods for thermal conductivity of refractory materials -- Part 3: Stationary heat flow method
  • JIS R 2011:1998 Methods for chemical analysis of refractories containing carbon and/or silicon-carbide
  • JIS R 2012:1998 Methods for chemical analysis of refractories containing zircon and/or zirconia
  • JIS R 2251-1:2007 Test methods for thermal conductivity of refractory materials -- Part 1: Hot-wire method (cross-array)
  • JIS R 2212-1:2006 Methods for chemical analysis of refractory products -- Part 1: Fireclay refractories
  • JIS R 2212-2:2006 Methods for chemical analysis of refractory products -- Part 2: Silica refractories
  • JIS C 60695-2-12:2013 Fire hazard testing.Part 2-12: Glowing/hot-wire based test methods.Glow-wire flammability index (GWFI) test method for materials
  • JIS C 60695-2-13:2013 Fire hazard testing.Part 2-13: Glowing/hot-wire based test methods.Glow-wire ignition temperature (GWIT) test method for materials
  • JIS A 1412-2:1999 Test method for thermal resistance and related properties of thermal insulations -- Part 2: Heat flow meter apparatus
  • JIS K 7196:1991 Testing method for softening temperature of thermoplastics film and sheeting by thermomechanical analysis
  • JIS R 1650-2:2002 Testing method for fine ceramics thermoelectric materials Part 2: Resistivity
  • JIS R 2212-5:2006 Methods for chemical analysis of refractory products -- Part 5: Chrome-magnesia refractories
  • JIS R 2016-2:2009 Methods for determination of sulfur in refractory products and raw materials -- Part 2: Instrumental analysis
  • JIS R 1650-3:2002 Method for measurement of fine ceramics thermoelectric materials Part 3: Thermal diffusivity, specific heat capacity, and thermal conductivity
  • JIS K 7197 AMD 1:2012 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis (Amendment 1)
  • JIS A 1412-3:1999 Test method for thermal resistance and related properties of thermal insulations -- Part 3: Circular pipe apparatus
  • JIS R 2013:1998 Methods for chemical analysis of refractories containing alumina, zirconia and silica
  • JIS R 1650-1:2002 Testing method for fine ceramics thermoelectric materials Part 1: Thermoelectric power
  • JIS A 1412-1:1999 Test method for thermal resistance and related properties of thermal insulations -- Part 1: Guarded hot plate apparatus
  • JIS A 1412-1:2016 Test method for thermal resistance and related properties of thermal insulations -- Part 1: Guarded hot plate apparatus

RO-ASRO, Primary Thermal Analysis Methods for Materials

  • STAS 5841-1967
  • STAS 166/1-1972 SILICA-ALUMINA REFRACTOP.IES Mcthods of analysis General indications for carrying out the analysis
  • STAS SR ISO 10564:1995 Soldering and brazing materials. Methods for the sampling of soft solders for analysis
  • STAS SR 13313-1995 Chemical analysis of ferrous materials. Recommendation for the drafting of standard methods of analysis employing flame atomic absorption spectrometry for the chemical analysis of iron and steel
  • STAS SR ISO 804:1995 Aluminium oxide primarily used for the production of aluminium -Preparation of solution for anatysis - Method by alkaline fusion
  • STAS SR 13314-1995 Chemical analysis of ferrous materials. Operational guidelines for the application of flame atomic absorption spectrometry in standard methods for the chemical analysis of iron and steel

RU-GOST R, Primary Thermal Analysis Methods for Materials

  • GOST 11930.0-1979 Hard-facind materials. General requirements for methods of analysis
  • GOST 2642.0-2014 Refractories and refractory raw materials. General requirements for methods of analysis
  • GOST 2642.0-1986 Refractories and refractory raw materials. General requiremetns for methods of analysis
  • GOST 26318.0-1984 Non-metallic ore materials. General requirements for methods of analysis
  • GOST 13997.0-1984 Zirconium containing refractory materials and products. General requirements for methods of analysis
  • GOST 26564.0-1985 Silicon carbide refractory materials and products. General requirements for methods of chemical analysis
  • GOST R 57754-2017 Polymer composites. Test method for determination of linear thermal expansion by thermomechanical analysis
  • GOST R 53293-2009 Fire hazard of substances and materials. Materials, substance and fire protective means. Identification by thermal analysis methods
  • GOST 1429.0-1977 Tin-lead solders. General requirements for methods of analysis
  • GOST R 57697-2017 Polymer composites. Method for determination of curing properties of pultrusion resins by thermal analysis
  • GOST 24596.0-2015 Feed phosphates. General requirements for analysis methods
  • GOST 26712-1994 Organic fertilizers. General requirements for methods of analysis
  • GOST 21216.0-1993 Clay raw materials. General requirements for the methods of testing
  • GOST 24018.0-1990 Nickel-based fire-resistant alloys. General requirements for methods of analysis
  • GOST 32362-2013 Inorganic glass and glass-crystalline materials. Determination of chemical composition. General requirements for methods of determining the content of major chemical components
  • GOST 24596.0-1981 Feed phosphates. General requirements to methods of analysis
  • GOST 27710-1988 Electrical insulating materials. General requirements for thermal endurance test method
  • GOST 28200-1989 Basic environmental testing procedures. Part 2. Tests. Test B: Dry heat
  • GOST 28214-1989 Basic environmental testing procedures. Part 2: Tests. Guidance for damp heat tests
  • GOST IEC 60811-1-2-2011 Common test methods for insulating and sheathing materials of electric and optical cables. Part 1-2. Methods for general application. Thermal ageing methods

国家市场监督管理总局、中国国家标准化管理委员会, Primary Thermal Analysis Methods for Materials

  • GB/T 36402-2018 Thermal analysis-mass spectrometry coupling method for ceramics materials
  • GB/T 11026.10-2019 Electrical insulating materials—Thermal endurance properties—Part 10: Accelerated determination of relative thermal endurance using analytical test methods(RTEA)—Instructions for calculation based on activation energy

Malaysia Standards, Primary Thermal Analysis Methods for Materials

  • MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis

IT-UNI, Primary Thermal Analysis Methods for Materials

American Society for Testing and Materials (ASTM), Primary Thermal Analysis Methods for Materials

  • ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
  • ASTM E870-82(2006) Standard Test Methods for Analysis of Wood Fuels
  • ASTM E831-13 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
  • ASTM E831-06 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
  • ASTM E831-05 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
  • ASTM E831-14 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
  • ASTM E870-82(1998)e1 Standard Test Methods for Analysis of Wood Fuels
  • ASTM E870-82(2019) Standard Test Methods for Analysis of Wood Fuels
  • ASTM E870-82(2013) Standard Test Methods for Analysis of Wood Fuels
  • ASTM E2403-04 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
  • ASTM E2403-06 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
  • ASTM E2403-06(2012) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
  • ASTM D1921-01 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
  • ASTM D1921-96 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
  • ASTM D1921-06 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
  • ASTM D1921-18 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
  • ASTM E831-00 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
  • ASTM E831-19 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
  • ASTM C429-01(2011) Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
  • ASTM D6406-99(2014) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
  • ASTM D6406-99 Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
  • ASTM D6406-99(2004) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
  • ASTM D6406-99(2009) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
  • ASTM D6406-99(2020) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
  • ASTM C92-95(2022) Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
  • ASTM C92-95(2022)e1 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
  • ASTM C429-21 Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
  • ASTM C92-95(2005) Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
  • ASTM D5461-93(1998) Standard Test Method for Rubber Additives-Wet Sieve Analysis of Powdered Rubber Chemicals
  • ASTM D5461-06(2021) Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials
  • ASTM E831-03 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
  • ASTM F1358-00 Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
  • ASTM F1358-00(2005) Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
  • ASTM F1358-08 Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
  • ASTM C1156-03 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
  • ASTM C1156-03(2011) Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
  • ASTM D5461-06(2017) Standard Test Method for Rubber Compounding Materials&x2014;Wet Sieve Analysis of Powdered Rubber Compounding Materials
  • ASTM C1156-95e1 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
  • ASTM C1156-18 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
  • ASTM D6407-99 Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
  • ASTM D6407-99(2004) Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
  • ASTM D6407-99(2009) Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
  • ASTM D6407-99(2020) Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
  • ASTM D6407-99(2014) Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
  • ASTM D5519-14 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
  • ASTM D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
  • ASTM F1358-16 Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
  • ASTM G144-01 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High-Temperature Combustion Analyzer
  • ASTM C1493-19 Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System
  • ASTM E3340-22 Standard Guide for Development of Laser Diffraction Particle Size Analysis Methods for Powder Materials
  • ASTM C871-08ae2 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
  • ASTM C871-08a Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
  • ASTM C871-08ae1 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
  • ASTM C871-11 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
  • ASTM C871-04 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
  • ASTM F1358/F1358M-20 Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
  • ASTM C871-18(2023) Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
  • ASTM C871-11e1 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
  • ASTM D5051-06(2017) Standard Test Method for Rubber Compounding Materials&x2014;Benzothiazyl Disulfide (MBTS)&x2014;Assay
  • ASTM C871-18 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
  • ASTM C1134-90(1995)e1 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
  • ASTM C1134-90(2012)e1 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
  • ASTM E2403-23 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
  • ASTM C871-95(2000) Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
  • ASTM C871-08 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
  • ASTM G144-96 Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High-Temperature Combustion Analyzer
  • ASTM G144-01(2006) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
  • ASTM G144-01(2022) Standard Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
  • ASTM C1134-23 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
  • ASTM C1134-17e1 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
  • ASTM C1134-17 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion

Professional Standard - Building Materials, Primary Thermal Analysis Methods for Materials

  • JC/T 2019-2010 Thermal analysis-Mass spectrometry coupling method for ceramics
  • JC/T 618-2005 Methods of chemical analysis of thermal insulation materals for leachable chloride,fluoride,silicate and sodium lons

Professional Standard - Electron, Primary Thermal Analysis Methods for Materials

  • SJ/Z 1463-1979 General requirements for chemical analysis of electronic ceramic materials

German Institute for Standardization, Primary Thermal Analysis Methods for Materials

  • DIN 51004:1994 Thermal analysis; determination of melting temperatures of crystalline materials by differential thermal analysis
  • DIN 53436-2:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 2: Thermal decomposition method
  • DIN 53436-4:2015-12 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids / Note: Applies in conjunction with DIN 53436-1 (2015-12), DIN 53436-2 (2015-12).
  • DIN EN 14532-1:2005-02 Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys; German version EN 14532-1:2004
  • DIN EN 6041:2018-03 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
  • DIN EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
  • DIN 53436-4:2015 Generation of thermal decomposition products from materials for their analytic-toxicological testing - Part 4: Thermal decomposition method for liquids
  • DIN 51076-1:1991 Testing of ceramic materials; chemical analysis of silicon carbide as main or minor constituent of ceramic materials; determination of SiC in materials with oxidic components and binding materials
  • DIN EN ISO 22007-3:2012-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012
  • DIN 53174-2:1992 Solvents for paints, varnishes and similar coating materials; methods of analysis for solvent mixtures; gas chromatographic method
  • DIN 55912-2 Bb.1:1999 Pigments - Titanium dioxide pigments; methods of analysis - Examples using the X-ray fluorescence analysis to determine minor constituents
  • DIN EN 61234-2:1998 Electrical insulating materials - Method of test for the hydrolytic stability - Part 2: Moulded thermosets (IEC 61234-1:1997); German version EN 61234-2:1998
  • DIN EN ISO 17296-3:2016-12 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014); German version EN ISO 17296-3:2016 / Note: To be replaced by DIN EN ISO/ASTM 52927 (2022-03).
  • DIN 17022-5:2000-03 Heat treatment of ferrous materials - Methods of heat treatment - Part 5: Surface hardening
  • DIN 17022-2:1986 Heat treatment of ferrous materials; heat treatment methods; hardening and tempering of tools
  • DIN EN 12698-2:2007-06 Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods; German version EN 12698-2:2007
  • DIN EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Part 2: Methods of test and general requirements; German version EN 13677-2:2003
  • DIN EN 12698-1:2007-06 Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods; German version EN 12698-1:2007
  • DIN EN ISO 26845:2008-06 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods (ISO 26845:2008); German version EN ISO 26845:2008

American National Standards Institute （ANSI), Primary Thermal Analysis Methods for Materials

  • ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
  • ANSI/ASTM D6260:1998 Test Method for Gravimetric Determination of Carbon Black in Nylon Materials

Danish Standards Foundation, Primary Thermal Analysis Methods for Materials

  • DS/EN 14532-1:2005 Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
  • DS/EN ISO 10564:1997 Soldering and brazing materials - Methods for the sampling of soft solders for analysis
  • DS/ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2: Primary calibration methods
  • DS/EN 12698-2:2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods
  • DS/EN ISO 26845:2008 Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
  • DS/ISO 1460:1980 Metallic coatings. Hot dip galvanized coatings on ferrous materials. Determination of the mass per unit area. Gravimetric method
  • DS/EN 12698-1:2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods
  • DS/EN ISO 21079-2:2008 Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis
  • DS/EN 12697-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity

Lithuanian Standards Office , Primary Thermal Analysis Methods for Materials

  • LST EN 14532-1-2005 Welding consumables - Test methods and quality requirements - Part 1: Primary methods and conformity assessment of consumables for steel, nickel and nickel alloys
  • LST EN ISO 10564:2000 Soldering and brazing materials - Methods for the sampling of soft solders for analysis (ISO 10564:1993)
  • LST EN 12698-2-2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods
  • LST EN 12698-1-2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods
  • LST EN 12697-15-2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity

Association Francaise de Normalisation, Primary Thermal Analysis Methods for Materials

  • NF EN 14532-1:2005 Produits consommables pour le soudage - Méthodes d'esai et exigences de qualité - Partie 1 : méthodes primaires et évaluation de la conformité des produits consommables pour l'acier, le nickel et les alliages de nickel
  • NF C26-306:1994 Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials.
  • BP X10-040:2003 Caractérisation sensorielle des matériaux - Méthodologie générale - Recommandations méthodologiques pour l'analyse sensorielle de la matière première au produit fini
  • NF S97-122-3*NF EN 13726-3:2003 Non-active medical devices - Test methods for primary wound dressings - Part 3 : waterproofness
  • NF L17-041*NF EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
  • NF T70-538:2003 Energetic materials for defense - Safety, vulnerability - Compatibility by thermo-gravimetric analysis
  • NF S97-122-6*NF EN 13726-6:2003 Non-active medical devices - Test methods for primary wound dressings - Part 6 : odour control.
  • NF X65-011-2*NF ISO 14934-2:2013 Fire tests - Calibration and use of heat flux meters - Part 2 : primary calibration methods
  • NF T51-227-3*NF EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3 : temperature wave analysis method
  • NF B40-316:1989 Refractory materials. Determination of thermal conductivity. Part 2 : hot-wire method (parallel).
  • NF EN ISO 20565-2:2009 Analyse chimique des produits réfractaires contenant du chrome et des matières premières contenant du chrome (méthode alternative à la méthode par fluorescence de rayons X) - Partie 2 : méthodes d'analyse chimique par voie humide
  • NF EN 6041:2018 Série aérospatiale - Matériaux non métalliques - Méthode d'essai - Analyse Enthalpique Différentielle (AED) des matériaux non métalliques (non polymérisés)
  • NF E67-002-3*NF EN ISO 17296-3:2016 Additive manufacturing - General principles - Part 3 : main characteristics and corresponding test methods
  • NF EN ISO 17296-3:2016 Fabrication additive - Principes généraux - Partie 3 : principales caractéristiques et méthodes d'essai correspondantes
  • NF EN ISO 26845:2008 Analyse chimique des matériaux réfractaires - Exigences générales pour les méthodes d'analyse chimique par voie humide, par spectrométrie d'absorption atomique (AAS) et par spectrométrie d'émission atomique avec plasma induit par haute fréq...
  • NF ISO 14934-2:2013 Essais au feu - Étalonnage et utilisation des appareils de mesure du flux thermique - Partie 2 : méthodes d'étalonnage primaire
  • NF C20-924-2-13*NF EN 60695-2-13:2011 Fire hazard testing - Part 2-13 : glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
  • NF C20-924-2-13/A1*NF EN 60695-2-13/A1:2014 Fire hazard testing - Part 2-13 : glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials

Group Standards of the People's Republic of China, Primary Thermal Analysis Methods for Materials

  • T/CEC 271-2019 Determination of main component content of composite insulator silicone rubber by thermogravimetric analysis
  • T/CWAN 0029.3-2021 Methods for chemical analysis of nickel-based welding materials-Part 3: Determination of nitrogen content by inert gas fusion thermal conductivity method

KR-KS, Primary Thermal Analysis Methods for Materials

  • KS C 2002-1998(2023) Test method of thermal life evaluation of plastics by thermogravimetry
  • KS L ISO 8894-2-2016 Refractory materials-Determination of thermal conductivity-Part2:Hot-wire methods(parallel)
  • KS D ISO 17296-3-2018(2023) Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods

AR-IRAM, Primary Thermal Analysis Methods for Materials

British Standards Institution (BSI), Primary Thermal Analysis Methods for Materials

  • BS 7819:1995 Guidelines for application of analytical test methods for thermal endurance testing of electrical insulating materials
  • BS 1902 Sec.2.2:1974 Methods of testing refractory materials. Chemical analysis (wet methods). Chemical analysis of chrome-bearing materials
  • BS 1902 Sec.9.1:1987 Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of alumino-silicate refractories by X-ray fluorescence
  • BS 1902 Sec.9.2:1987 Methods of testing refractory materials. Chemical analysis by instrumental methods. Analysis of silica refractories by X-ray fluorescence
  • BS 1016 SubSec.106.4.1:1993 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of total sulfur content. Eschka method
  • BS EN 6041:2018 Aerospace series. Non-metallic materials. Test method. Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
  • BS PD CEN/TR 10362:2014 Chemical analysis of ferrous materials. Determination of selenium in steels. Electrothermal atomic absorption spectrometric method
  • BS 476-11:1982 Fire tests on building materials and structures - Method for assessing the heat emission from building materials
  • BS 1902 Sec.5.14:1992 Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal expansion (temperatures up to 1500C) (methods 1902-5.14)
  • BS EN 13677-2:2003 Reinforced thermoplastic moulding compounds - Specification for GMT - Methods of test and general requirements
  • BS DD 250:1999 Road materials - Test method for the analysis of bituminous mixtures by ignition
  • BS ISO 20263:2017 Microbeam analysis. Analytical electron microscopy. Method for the determination of interface position in the cross-sectional image of the layered materials
  • BS PD IEC/TS 60216-7-1:2015 Electrical insulation materials. Thermal endurance properties. Accelerated determination of relative thermal endurance using analytical test methods (RTEA). Instructions for calculations based on activation energy
  • BS 1902 Sec.5.8:1992 Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (split column method) (method 1902-508)
  • BS PAS 377:2012 Specification for consumables used in the collection, preservation and processing of material for forensic analysis. Requirements for product, manufacturing and forensic kit assembly
  • BS ISO 22415:2019 Surface chemical analysis. Secondary ion mass spectrometry. Method for determining yield volume in argon cluster sputter depth profiling of organic materials
  • BS 1902-2.3 Addendum No. 1:1976 Methods of testing refractory materials - Chemical analysis (wet methods) - Determination of boron in magnesites

Professional Standard - Commodity Inspection, Primary Thermal Analysis Methods for Materials

  • SN/T 3126-2012 Determination of sulfated ash of organic materials.Thermogravimetry

Association of German Mechanical Engineers, Primary Thermal Analysis Methods for Materials

  • VDI 3822 Blatt 2.1.10-2012 Failure analysis - Significant instrumental analysis methods for failure analysis of products made of plastics
  • DVS 2203-1-2003 Testing of welded joints of thermoplastics sheet and pipes - Test methods - Requirements
  • DVS 2207-3-2013 "Welding of thermoplastics - Hot-gas string-bead welding and hot-gas welding with torch separate from filler rod of pipes, pipe components and sheets - Methods, requirements"
  • DVS 2207-3-2005 "Welding of thermoplastics - Hot-gas string-bead welding and hot-gas welding with torch separate from filler rod of pipes, pipe components and sheets - Methods, requirements"

SG-SPRING SG, Primary Thermal Analysis Methods for Materials

  • SS ISO 10564:1993 Soldering And Brazing Materials -Methods For The Sampling Of Soft Solders For Analysis
  • SS 5 Pt.B4-1987 Methods Of Test For Paints, Varnishes And Related Materials Part B4: Condition In Container
  • SS 5 Pt.C3-1987 Methods Of Test For Paints, Varnishes And Related Materials Part C3: Analysis Of Red Lead In Pigment
  • SS 323 Pt.F1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part F1 : Determination Of Heat Seal Strength
  • SS 323 Pt.F2-1987 Methods Of Test For Flexible Plastic Packaging Materials Part F2 : Determination Of Unrestrained Linear Thermal Shrinkage

US-FCR, Primary Thermal Analysis Methods for Materials

工业和信息化部, Primary Thermal Analysis Methods for Materials

  • YS/T 1258-2018 Thermal Analysis Methods for Testing Melting and Crystallization Temperatures of Nonferrous Metal Materials
  • JC/T 618-2019 Chemical analysis methods for leached chlorides, fluorides, silicates and sodium ions in thermal insulation materials
  • YS/T 1509.2-2021 Chemical analysis method of silicon-carbon composite anode materials Part 2: Determination of carbon content High-frequency heating infrared absorption method
  • YS/T 63.3-2016 Testing methods for carbon materials for aluminum use Part 3: Comparative method for determination of thermal conductivity

IN-BIS, Primary Thermal Analysis Methods for Materials

Professional Standard - Nuclear Industry, Primary Thermal Analysis Methods for Materials

  • EJ/T 1110-2000 Standard guide for establishing calibration for a measurement method used to analyze nuclear fuel cycle materials

Standard Association of Australia （SAA）, Primary Thermal Analysis Methods for Materials

ES-UNE, Primary Thermal Analysis Methods for Materials

  • UNE-EN 13726-1:2003 ERRATUM Test methods for primary wound dressings. Part 1: Aspects of absorbency.
  • UNE-EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC) (Endorsed by Asociación Española de Normalización in March of 2018.)
  • UNE-EN 14532-1:2006 Welding consumables. Test methods and quality requirements. Part 1: Primary methods and conformity assesment of consumables for steel, nickel and nickel alloys
  • UNE-EN 61234-2:1998 ELECTRICAL INSULATING MATERIALS. METHODS OF TEST FOR THE HYDROLYTIC STABILITY. PART 2: MOULDED THERMOSETS. (Endorsed by AENOR in July of 1998.)
  • UNE-EN 13726-2:2003 ERRATUM Test methods for primary wound dressings. Part 2: Moisture vapour transmission rate of permeable film dressings.

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Primary Thermal Analysis Methods for Materials

  • PREN 6041-1995 Aerospace Series Non-Metallic Materials Test Method Analysis of Non-Metallic Materials (Uncured) by Differential Scanning Calorimetry (DSC) (Edition P1)
  • PREN 6040-1995 Aerospace Series Non-Metallic Materials Test Method Analysis of Thermoset Systems by High Performance Liquid Chromatography (HPLC) (Edition P1)

European Committee for Standardization (CEN), Primary Thermal Analysis Methods for Materials

  • EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
  • CEN/TR 10362:2014 Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method
  • EN 10200:2012 Chemical analysis of ferrous materials - Determination of boron in steels - Spectrophotometric method
  • prEN 10212-1991 Chemical analysis of ferrous materials; determination of arsenic in steel and iron; spectrophotometric method
  • PD CEN/TR 10362:2014 Chemical analysis of ferrous materials - Determination of selenium in steels - Electrothermal atomic absorption spectrometric method

The American Road & Transportation Builders Association, Primary Thermal Analysis Methods for Materials

  • AASHTO T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials
  • AASHTO T 311-2000(R2010) Standard Method of Test for Grain-Size Analysis of Granular Soil Materials
  • AASHTO T 353-2014 Standard Method of Test for Particle Size Analysis of Hydraulic Cement and Related Materials by Light Scattering

JP-JWWA, Primary Thermal Analysis Methods for Materials

  • JWWA Z110-2013 Materials and installations for water supply analysis methods for desoluted water

Professional Standard - Electricity, Primary Thermal Analysis Methods for Materials

  • DL/T 568-1995 Fast test methods for ultimate analysis of fuel by infrared absorption & thermal conductivity

SE-SIS, Primary Thermal Analysis Methods for Materials

  • SIS SS 3579-1987 Plastics pipes - Thermoanalytic test methods for the determination of oxidation stability

CZ-CSN, Primary Thermal Analysis Methods for Materials

  • CSN 72 6026 Cast.1-1980 Refractories. Magnesite and magnesi- te -limematerials. General recomendations to chemieal analysis methods
  • CSN 72 6070 Cast.1-1981 Refractories and products containing chrome and chrome ores. General recommendations to methods of chemical analysis

GOSTR, Primary Thermal Analysis Methods for Materials

  • GOST 34445-2018 Nanomaterials. Nanostructured oxide magnesium. Technical requirements and test (analysis) methods
  • GOST 34444-2018 Nanomaterials. Nanostructured hydroxide magnesium. Technical requirements and test (analysis) methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Primary Thermal Analysis Methods for Materials

  • GB/T 4298-1984 The activation analysis method for the determination of elemental impurities in semiconductor silicon materials
  • GB/T 43087-2023 Method for determining the interface position in cross-sectional images of layered materials using microbeam analysis and electron microscopy
  • GB/T 25006-2010 Sensory analysis-Methods for assessing modifications to the flavour of foodstuffs due to packaging

YU-JUS, Primary Thermal Analysis Methods for Materials

  • JUS B.D8.205-1987 Refractories. Methods forchemicalanalysis. Analysis silica products, kvarcit and si lica sand.
  • JUS B.D8.225-1984 Refractories. Methods for testing. Chemical analysis tor magnesit and magnesit production
  • JUS B.D8.230-1987 Refractories. Methods for chemical analysis. Testing of magnesite-hrom, hrome-magnesite and chromite products

Professional Standard - Machinery, Primary Thermal Analysis Methods for Materials

  • JB/T 8443.1-2014 Test methods for chemical analysis of copper-chromium electric contact material.Part 1: Determination of chromium content
  • JB/T 8443.2-2014 Test methods for chemical analysis of copper-chromium electric contact material.Part 2: Determination of chromium content
  • JB/T 4107.2-1999 Chemical analyse method for electrical contact materials.Determination of copper content in the copper tungsten ( iodimetry)
  • JB/T 4107.4-1999 Chemical analyse method for electrical contact materials.Determination of silver content in the silver - tungsten ( iodimetry)
  • JB/T 8063.1-1996 Method for chemical analysis of powder metallurgy materials and products Determination of carbon in iron-based materials and products (gas volumetric method)
  • JB/T 8063.8-1996 Chemical analysis method of powder metallurgy materials and products Determination of iron in copper-based materials and products (EDTA—H2O2 photometry)
  • JB/T 8063.6-1996 Determination of lead in copper-based materials and products by chemical analysis method of powder metallurgy materials and products (electrolytic separation-EDTA titration method)
  • JB/T 4107.5-1999 Chemical analyse method for electrical contact materials.Determination of nickel content in the silver - nickel ( ETDA volumetry method)
  • JB/T 4107.2-2014 Chemical analyse method for electrical contact materials.Part 2: Determination of copper content in the copper tungsten
  • JB/T 4107.4-2014 Chemical analyse method for electrical contact materials.Part 4: Determination of silver content in the silver-tungsten
  • JB/T 4107.5-2014 Chemical analyse method for electrical contact materials.Part 5: Determination ofnickel content in the silver-nickel
  • JB/T 4107.6-2014 Chemical analyse method for electrical contact materials.Part 6: Determine iron content in the silver-iron
  • JB/T 8063.1-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 1:The gas volumetric method for the determination of carbon in iron-based materials and products
  • JB/T 8063.3-1996 Method for chemical analysis of powder metallurgy materials and products Determination of molybdenum in iron-based materials and products (thiocyanate photometry)
  • JB/T 8063.6-2011 Methods for chemical analysis of powder metallurgy materials and products.Part 6:The electrolytic separation-EDTA titrimetric method for the determination of lead in copper-based materials and products
  • JB/T 4107.3-2014 Chemical analyse method for electrical contact materials.Part 3: Determination of carbon content in the silver-graphite
  • JB/T 8063.3-2011 Methods for chemicalanalysis of powder metallurgy materials and products.Part 3:The thiocyanate photometric method for the determination of molybdenum in iron-based materials and products

International Organization for Standardization (ISO), Primary Thermal Analysis Methods for Materials

  • ISO/CD 16094-3 Water quality — Analysis of plastics in water — Part 3: Thermo-analytical methods for waters with low content of natural suspended solids
  • ISO 22007-3:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method
  • ISO/CD 20263:2023 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials
  • ISO 20263:2017 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials

AENOR, Primary Thermal Analysis Methods for Materials

  • UNE-EN ISO 10564:1997 SOLDERING AND BRAZING MATERIALS. METHODS FOR THE SAMPLING OF SOFT SOLDERS FOR ANALYSIS. (ISO 10564:1993).
  • UNE-EN 12698-2:2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 2: XRD methods
  • UNE-EN 12698-1:2007 Chemical analysis of nitride bonded silicon carbide refractories - Part 1: Chemical methods
  • UNE-EN ISO 17296-3:2017 Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014)
  • UNE-EN 12697-15:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the segregation sensitivity

AASHTO - American Association of State Highway and Transportation Officials, Primary Thermal Analysis Methods for Materials

  • T 37-2007 Standard Method of Test for Sieve Analysis of Mineral Filler for Hot Mix Asphalt (HMA)
  • T37-1991 Standard Method of Test for Sieve Analysis of Mineral Filler for Road and Paving Materials (ASTM D546-88)
  • T 311-2000 Standard Method of Test for Grain-Size Analysis of Granular Soil Materials (Twentieth Edition)
  • T 37-2006 Standard Method of Test for Sieve Analysis of Mineral Filler for Hot-Mix Asphalt (ASTM Designation D 546-99(2005))
  • T 353-2014 Standard Method of Test for Particle Size Analysis of Hydraulic Cement and Related Materials by Light Scattering
  • T37-1995 Standard Method of Test for Sieve Analysis of Mineral Filler for Road and Paving Materials (Eighteenth Edition; ASTM D546-94)
  • T37-1999 Standard Method of Test for Sieve Analysis of Mineral Filler for Road and Paving Materials (Twentieth Edition; ASTM D546-94)

Professional Standard - Medicine, Primary Thermal Analysis Methods for Materials

  • YY/T 0652-2008 Wear of implant materials.Polymer and metal wear particles.Isolation,characterization and quantification

Professional Standard - Public Safety Standards, Primary Thermal Analysis Methods for Materials

  • GA/T 207-1999 Methods of qualitative and quantitative analysis for cocaine,benzylecgonine by HPLC & GC in case samples
  • GA 101-1995 Qualitative and quantitative analysis methods for organic phosphorous pesticides in case samples

Indonesia Standards, Primary Thermal Analysis Methods for Materials

  • SNI 04-6190.1.2-2001 Common test methods for insulating and sheathing materials of electric cables. Part 1: Methods for general application - Section 2: Thermal ageing methods

BE-NBN, Primary Thermal Analysis Methods for Materials

  • NBN-EN 10200-1992 Chemical analysis of ferrous materials - Determination of boron in steel - Spectrophotometry method

NZ-SNZ, Primary Thermal Analysis Methods for Materials

  • AS/NZS 4502.1:2006 Methods for evaluating clothing for protection against heat and fire Part 1: Evaluation of thermal behaviour of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002)

European Association of Aerospace Industries, Primary Thermal Analysis Methods for Materials

  • AECMA PREN 4261-6-1995 Aerospace Series Metallic Materials Rules for Drafting and Presentation of Test Method Standards Part 6 : Specific Requirements for Chemical Analysis Method Standard Edition P1

CEN - European Committee for Standardization, Primary Thermal Analysis Methods for Materials

  • EN 1391:1998 Adhesives for Leather and Footwear Materials - A Method for Evaluating the Bondability of Materials - Minimum Requirements and Material Classification

未注明发布机构, Primary Thermal Analysis Methods for Materials

  • BS 1902-5.5:1991(2009) Methods of testing Refractory materials — Part 5 : Refractory and thermal properties — Section 5.5 Determination of thermal conductivity (panel / calorimeter method) (method 1902 - 505)
  • BS EN ISO 26845:2008(2009) Chemical analysis of refractories — General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP - AES) methods

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Primary Thermal Analysis Methods for Materials

  • GB/T 10574.9-2017 Methods for chemical analysis of tin-lead solders—Part 9：Determination of aluminium content—Graphite furnace atomic absorption spectrometric method

Professional Standard - Traffic, Primary Thermal Analysis Methods for Materials

  • JT/T 669-2006 Geosynthetics in highway engineerings Sort, capability demand and test method of composite materials

Professional Standard - Non-ferrous Metal, Primary Thermal Analysis Methods for Materials

  • YS/T 63.3-2006 Carbonaceous materials used in the production of aluminium-Part 3:Determination of the thermal conductivity using a comparative method

European Committee for Electrotechnical Standardization（CENELEC）, Primary Thermal Analysis Methods for Materials

  • EN 60695-2-13:2010 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials (Incorporates Amendment A1: 2014)

CENELEC - European Committee for Electrotechnical Standardization, Primary Thermal Analysis Methods for Materials

  • EN 60695-2-13:2001 Fire Hazard Testing Part 2-13: Glowing Hot-Wire Based Test Methods - Glow-Wire Ignitability Test Method for Materials

International Electrotechnical Commission (IEC), Primary Thermal Analysis Methods for Materials

  • IEC 60695-2-13:2010 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
  • IEC 60695-2-13:2021 RLV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
  • IEC TS 60216-7-1:2015 Electrical insulation materials - Thermal endurance properties - Part 7-1: Accelerated determination of relative thermal endurance using analytical test methods (RTEA) - Instructions for calculations
  • IEC 60695-2-13:2010/AMD1:2014 Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials
  • IEC 60695-2-12:2014 Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials
  • IEC 60695-2-12:2021 RLV Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials

TH-TISI, Primary Thermal Analysis Methods for Materials

  • TIS 2510.1-2010 Determination of the ultimate aerobic biodegrability of plastics under controlled composting conditions.method by analysis of evolved carbon dioxide.part 1: general method

  Thermal Analysis Methods for Materials, Primary Thermal Analysis Methods for Materials, Main modern materials analysis methods.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved