ZH
RU
ES

The hazards of organic waste gas

The hazards of organic waste gas, Total:192 items.

In the international standard classification, The hazards of organic waste gas involves: Internal combustion engines, Internal combustion engines for road vehicles, Shipbuilding and marine structures in general, Transport, Safety of machinery, Wastes, Services, Water quality, Air quality, Protection against fire, Electrical engineering in general, Vocabularies, Structures of buildings, On-board equipment and instruments, Railway rolling stock, Environmental testing, Electrical and electronic testing, Installations in buildings, Protection against dangerous goods, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Analytical chemistry, Ventilators. Fans. Air-conditioners, Products of the chemical industry, Passenger cars. Caravans and light trailers, FOOD TECHNOLOGY, Metrology and measurement in general.

US-FCR, The hazards of organic waste gas

FCR DOE 5480.3-1985 SAFETY REQUIREMENTS FOR THE PACKAGING AND TRANSPORTATION OF HAZARDOUS MATERIALS, HAZAROUS SUBSTANCES, AND HAZARDOUS WASTES
FCR COE EP 1110-1-21-2000 AIR PATHWAY ANALYSIS FOR THE DESIGN OF HAZARDOUS, TOXIC, AND RADIOACTIVE WASTE (HTRW) REMEDIAL ACTION PROJECTS

RU-GOST R, The hazards of organic waste gas

GOST R 51249-1999 Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods
GOST 31967-2012 Internal combustion reciprocating engines. Emissions of harmful substances with the exhaust gases. Limit values and test methods
GOST 17.2.2.05-1997 Nature protection. Atmosphere. Rates and testing methods of harmful substances ejections with exhaust gases from diesel engines, tractors and agricultural machines
GOST 17.2.2.05-1986 Nature protection. Atmosphere. Rates and testing methods of harmful substances ejections with exhaust gases from fractor and combine diesel engines
GOST ISO 14123-2-2001 Safety of machinery. Reduction of risks to health from hazardous substances emitted by machihery. Part 2. Choice procedure of verification methods
GOST 30574-1998 Internal combustion reciprocating engines. Emissions and diesel smoke. Test cycles
GOST R 55093-2012 Resources saving. Waste treatment. Requirements for exchange of information concerning on hazardous facilities accidents capable of causing transfrontier damage
GOST R 55829-2013 Resources saving. Best available techniques. Environmentally sound management of wastes consisting of, containing or contaminated with persistent organic pollutants
GOST R ISO 16000-10-2009 Indoor air. Part 10. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test cell method
GOST R 52033-2003 Motor vehicles with petrol engines. Emission of the exhaust gas pollutants. Norms and methods of the control for estimation of technical condition
GOST R ISO 16000-9-2009 Indoor air. Part 9. Determination of the emission of volatile organic compounds from building products and furnishing. Emission test chamber method
GOST R 54942-2012 Gas fuel motor vehicles with spark ignition engines. Emission of the exhaust gas pollutants. Norms and methods of the control for estimation of technical condition
GOST R 8.917-2016 State system for ensuring the uniformity of measurements. Instruments for measuring the smoke of exhaust gases from the motor vehicles equipped with compression-ignition engines. Verification method
GOST R 8.917-2015 State system for ensuring the uniformity of measurements. Instruments for measuring the smoke of exhaust gases from the motor vehicles equipped with compression-ignition engines. Verification method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The hazards of organic waste gas

GB/T 12301-1999 Detection methods for harmful gas evolved from non-dangerous cargo in holds
GB/T 25749.9-2012 Safety of machinery.Evaluation of the emission of airborne-hazardous substances.Part 9:Decontamination index
GB/T 29493.3-2013 Determination of harmful substances in textile dyeing and finishing auxiliaries.Part 3:Determination of organotins.GC/MS method
GB/T 25749.1-2010 Safety of machinery.Evaluation of the emission of airborne hazardous substances.Part 1:Selection of test methods
GB/T 25749.4-2010 Safety of machinery.Evaluation of the emission of airborne hazardous substances.Part 4:Tracer method for the measurement of the capture efficiency of an exhaust system
GB/T 25749.2-2010 Safety of machinery.Evaluation of the emission of airborne hazardous substances.Part 2:Tracer gas method for the measurement of the emission rate of a given pollutant
GB/T 25749.8-2012 Safety of machinery.Evaluation of the emission of airborne hazardous substances.Part 8:Room method for the measurement of the pollutant concentration parameter

British Standards Institution (BSI), The hazards of organic waste gas

BS EN 626-1+A1:1995 Safety of machinery. Reduction of risks to health from Hazardous substances emitted by machinery. Principles and specifications for machinery manufacturers
BS EN 626-1:1994+A1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
BS EN ISO 14123-1:2015 Safety of machinery. Reduction of risks to health resulting from hazardous substances emitted by machinery. Principles and specifications for machinery manufacturers
BS EN ISO 14123-2:2015 Safety of machinery. Reduction of risks to health resulting from hazardous substances emitted by machinery. Methodology leading to verification procedures
BS EN 626-2:1996+A1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
BS 4N 100-5:1999 Aircraft oxygen systems and equipment - Guide to fire and explosion hazards associated with oxygen
BS EN 1093-11:2001+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Decontamination index
BS ISO TR 9122-6:1994 Toxicity testing of fire effluents - Guidance for regulators and specifiers on the assessment of toxic hazard in fires in buildings and transport
BS EN 1093-11:2001 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Decontamination index
BS EN 1093-1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances Part 1: Selection of test methods
BS EN 1093-1:1999 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Selection of test methods
BS ISO 24527:2020 Service activities relating to drinking water supply, wastewater and stormwater systems. Guidelines on alternative drinking water service provision during a crisis
BS EN 1093-9+A1:1999 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Pollutant concentration parameter, room method
BS EN 1093-9:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 9: Pollutant concentration parameter, room method
BS EN 1093-6+A1:1999 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Separation efficiency by mass, unducted outlet
BS EN 1093-6:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 6: Separation efficiency by mass, unducted outlet
BS EN 1093-2:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Tracer gas method for the measurement of the emission rate of a given pollutant
BS EN 1093-4:1996+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances Part 4 Capture efficiency of an exhaust system— Tracer method
BS EN 1093-2:2006 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Tracer gas method for the measurement of the emission rate of a given pollutant
BS EN 1093-3+A1:2007 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Test bench method for the measurement of the emission rate of a given pollutant
BS EN 1093-3:2006+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 3: Test bench method for the measurement of the emission rate of a given pollutant
BS EN ISO 13199:2012 Stationary source emissions. Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes. Non-dispersive infrared analyser equipped with catalytic converter
BS ISO 20264:2019 Stationary source emissions. Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes
BS EN 1093-8:1998+A1:2008 Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Pollutant concentration parameter, test bench method
BS EN 1093-8+A1:1999 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Pollutant concentration parameter, test bench method

American Society for Testing and Materials (ASTM), The hazards of organic waste gas

ASTM D6050-97(2003)e1 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-21 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-09(2016) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM D6050-97(2003) Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste

Association Francaise de Normalisation, The hazards of organic waste gas

NF E09-080-2/IN1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2 : methodology leading to verification procedures.
NF E09-080-1:1994 Safety of machinery. Reduction of risks to health from hazardous substances emitted by machinery. Part 1 : principles and specifications for machinery manufacturers.
NF E09-080-1/IN1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 1 : principles and specifications for machinery manufacturers.
NF E09-080-2:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2 : methodology leading to verification procedures.
NF E09-080-1:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 1 : principles and specifications for machinery manufacturers.
NF E09-080-2:1996 Safety of machinery. Reduction of risk to health from hazardous substances emitted by machinery. Part 2 : methodology leading to verification procedures.
NF ISO 16312-1:2017 Lignes directrices pour évaluer la validité des modèles de feu physiques pour l'obtention de données sur les effluents du feu en vue de l'évaluation des risques et dangers - Partie 1 : critères
NF E09-081-11/IN1*NF EN 1093-11/IN1:2008 Safety of machinery - Evaluation of the emission of airbone hazardous substances - Part 11 : decontamination index.
NF E09-081-11:2001 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11 : decontamination index.
NF E09-081-11*NF EN 1093-11+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11 : decontamination index
FD ISO/TR 16312-2:2021 Lignes directrices pour évaluer la validité des modèles de feu physiques pour l'obtention de données sur les effluents du feu en vue de l'évaluation des risques et dangers - Partie 2 : évaluation des différents modèles de feu physiques
NF E09-081-4*NF EN 1093-4+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 : capture efficiency of an exhaust system - Tracer method
NF E09-081-4:1996 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Part 4 : capture efficiency of an exhaust system. Tracer method.
NF EN 15757:2010 Conservation des biens culturels - Spécifications applicables à la température et à l'humidité relative pour limiter les dommages mécaniques causés par le climat aux matériaux organiques hygroscopiques
NF E09-081-2/IN1*NF EN 1093-2/IN1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2 : tracer gas method for the measurement of the emission rate of a given pollutant
NF E09-081-4/IN1*NF EN 1093-4/IN1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4 : capture efficiency of an exhaust system - Tracer method
NF E09-081-2*NF EN 1093-2+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2 : tracer gas method for the measurement of the emission rate of a given pollutant
NF E09-081-7/IN1*NF EN 1093-7/IN1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7 : separation efficiency by mass, ducted outlet
NF E09-081-6/IN1*NF EN 1093-6/IN1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6 : separation efficiency by mass, unducted outlet
NF EN 1093-4+A1:2008 Sécurité des machines - Évaluation de l'émission de substances dangereuses véhiculées par l'air - Partie 4 : efficacité de captage d'un système d'aspiration - Méthode par traçage
NF EN 1093-4/IN1:2008 Sécurité des machines - Évaluation de l'émission de substances dangereuses véhiculées par l'air - Partie 4 : efficacité de captage d'un système d'aspiration - Méthode par traçage
NF E09-081-2:2007 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2 : tracer gas method for the measurement of the emission rate of a given pollutant.

Korean Agency for Technology and Standards (KATS), The hazards of organic waste gas

KS B ISO 14123-2-2002(2022) Safety of machinery－ Reduction of risks to health from hazardous substances emitted by machinery-Part 2 : Methodology leading to verification procedures
KS B ISO 14123-1-2002(2022) Safety of machinery－Reduction of risks to health from hazardous substances emitted by machinery－Part 1：Principles and specifications for machinery manufacturers
KS C IEC 60695-5-1:2004 Fire hazard testing－Part 5－1：Assessment of potential corrosion damage by fire effluent－General guidance
KS C IEC 60695-5-1:2017 Fire hazard testing — Part 5-1: Corrosion damage effects of fire effluent — General guidance
KS I ISO TS 24520:2021 Service activities relating to drinking water supply systems and wastewater systems — Crisis management — Good practice for technical aspects

GOSTR, The hazards of organic waste gas

GOST 24585-1981 Marine, locomotive and commercial diesels. Emission of harmful substances with exhaust gases. Permissible values and measurement methods
GOST 34404-2018 Furniture, timber and polymers. Method for determining the release of harmful volatile organic compounds in climatic chambers using chromatographic analysis

International Organization for Standardization (ISO), The hazards of organic waste gas

ISO 24518:2015 Activities relating to drinking water and wastewater services - Crisis management of water utilities
ISO/TS 24520:2017 Service activities relating to drinking water supply systems and wastewater systems — Crisis management — Good practice for technical aspects
ISO 29042-9:2011 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Decontamination index
ISO 24527:2020 Service activities relating to drinking water supply, wastewater and stormwater systems — Guidelines on alternative drinking water service provision during a crisis
ISO 29042-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
ISO 29042-2:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
ISO 20264:2019 Stationary source emissions — Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes
ISO 29042-8:2011 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Room method for the measurement of the pollutant concentration parameter

German Institute for Standardization, The hazards of organic waste gas

DIN EN 626-2:2008 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures(includes Amendment A1:2008); English version of DIN EN 626-2:2008-09
DIN EN 626-1:2008 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers(includes Amendment A1:2008); English version of DIN EN 626-1:2008-09
DIN EN 626-2 Berichtigung 1:2009 Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures; German version EN 626-2:1996+A1:2008, Corrigendum to DIN EN 626-2:2008-09
DIN EN 626-1 Berichtigung 1:2009 Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers; German version EN 626-1:1994+A1:2008, Corrigendum to DIN EN 626-1:2008-09
DIN 38415-6:2003 German standard methods for the examination of water, waste water and sludge - Subanimal testing (group T) - Part 6: Toxicity to fish; Determination of the non-acute-poisonous effect of waste water to fish eggs by dilution limits (T 6)
DIN EN 1093-1:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods; English version of DIN EN 1093-1:2009-02
DIN EN 1093-1:2009-02 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods; German version EN 1093-1:2008 / Note: DIN EN 1093-1 (1998-11) remains valid alongside this standard until 2009-12-28.
DIN EN 1093-4:2008-09 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method; German version EN 1093-4:1996+A1:2008 / Note: DIN EN 1093-4 (1996-05) remains valid alongside this stan...
DIN EN 1093-4 Berichtigung 1:2009-02 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method; German version EN 1093-4:1996+A1:2008, Corrigendum to DIN EN 1093-4:2008-09
DIN EN 1093-4:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method; English version of DIN ISO 1093-4:2008-09
DIN EN 1093-2:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant(includes Amendment A1:2008); English version of DIN EN 1093-2:2008-09
DIN EN 1093-9:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method(includes Amendment A1:2008); English version of DIN EN 1093-9:2008-11
DIN EN 1093-2:2008-09 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant; German version EN 1093-2:2006+A1:2008 / Note: DIN EN 1093-2 (2007-03) remains v...
DIN EN 1093-2 Berichtigung 1:2009-02 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant; German version EN 1093-2:2006+A1:2008, Corrigendum to DIN EN 1093-2:2008-09
DIN EN 1093-7:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet(includes Amendment A1:2008); English version of DIN EN 1093-7:2008-11
DIN EN 1093-8:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method(includes Amendment A1:2008); English version of DIN EN 1093-8:2008-11
DIN EN 1093-6:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet(includes Amendment A1:2008); English version of DIN EN 1093-6:2008-11
DIN EN 1093-2:2007 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant; German version EN 1093-2:2006

PH-BPS, The hazards of organic waste gas

PNS ISO 14123-1:2021 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
PNS ISO 14123-2:2021 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures
PNS ISO 29042-4:2021 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system
PNS ISO 29042-2:2021 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
PNS ISO 29042-8:2021 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Room method for the measurement of the pollutant concentration parameter

Group Standards of the People's Republic of China, The hazards of organic waste gas

T/CIC 401-2021 High temperature non-dispersive infrared absorption method for detection of inorganic harmful gas factors in waste gas from fixed pollution sources in metallurgical industry
T/GDC 143-2022 Fugitive emissions—Determination of volatile organic compounds metal oxide method
T/ACEF 086-2023 Stationary source emission—Determination of 22 oxygenated volatile organic compounds—Gas chromatography mass spectrometry

International Electrotechnical Commission (IEC), The hazards of organic waste gas

IEC 60695-5-1:2002 Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent; General guidance
IEC TR2 60695-5-2:1994 Fire hazard testing - Part 5: Assessment of potential corrosion damage by fire effluent; section 2: Guidance on the selection and use of test methods

CENELEC - European Committee for Electrotechnical Standardization, The hazards of organic waste gas

EN 60695-5-1:1993 Fire Hazard Testing Part 5: Assessment of Potential Corrosion Damage by Fire Effluent Section 1: General Guidance

Japanese Industrial Standards Committee (JISC), The hazards of organic waste gas

JIS C 60695-5-1:2011 Fire hazard testing -- Part 5-1: Corrosion damage effects of fire effluent -- General guidance
JIS F 8080:2002 Electrical installations in ships -- Part 506: Special features -- Ships carrying specific dangerous goods and materials hazardous only in bulk
JIS C 60695-5-1:1996 Fire hazard testing Part 5: Assessment of potential corrosion damage by fire effluent -- Section 1: General guidance
JIS B 9709-2:2001 Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 2: Methodology leading to verification procedures
JIS C 60695-5-2:1999 Fire hazard testing -- Part 5: Assessment of potential corrosion damage by fire effluent -- Section 2: Guidance on the selection and use of test methods
JIS B 9709-1:2001 Safety of machinery -- Reduction of risks to health from hazardous substances emitted by machinery -- Part 1: Principles and specifications for machinery manufacturers

Association of German Mechanical Engineers, The hazards of organic waste gas

VDI 3927 Blatt 2-2015 Waste gas cleaning - Reduction of inorganic and organic trace species in combustion flue gases
VDI 3927 Blatt 2-2004 Waste gas cleaning - Removal of inorganic and organic trace species from combustion flue gases
VDI 3481 Blatt 2-1998 Gaseous emission measurement - Determination of gaseous organic carbon in waste gases - Adsorption on silica gel

Professional Standard - Environmental Protection, The hazards of organic waste gas

HJ 732-2014 Emission from stationary sources.Sampling of volatile organic compounds.Bags method
HJ 768-2015 Determination of Organophosphorus Pesticides in Solid Waste by Gas Chromatography
HJ 912-2017 Determination of Organochlorine Pesticides in Solid Waste by Gas Chromatography-Mass Spectrometry
HJ 760-2015 Solid waste—Determination of volatile organic compounds — Headspace-gas chromatography method
HJ 951-2018 Determination of semi-volatile organic compounds in solid waste by gas chromatography-mass spectrometry
HJ 920-2017 Emergency Monitoring of Inorganic Harmful Gases in Ambient Air with Portable Fourier Transform Infrared Instrument
HJ 643-2013 Solid waste -Determination of volatile organic compounds- Headspace-gas chromatography/mass method
HJ 734-2014 Stationary source emission.Determination of volatile organic compounds.Sorbent adsorption and thermal desorption gas chromatography mass spectrometry method
HJ 1078-2019 Determination of 8 kinds of sulfur-containing organic compounds such as methyl mercaptan in stationary pollution source exhaust gas bag sampling-preconcentration/gas chromatography-mass spectrometry
HJ 963-2018 Determination of 47 Pesticides including Organophosphorus and Pyrethroids in Solid Waste by Gas Chromatography-Mass Spectrometry

Indonesia Standards, The hazards of organic waste gas

SNI 13-6565.2-2001 Curriculum of training for oil and natural gas special technicians on environmental management systems - Part 2: Controll staff of solid waste and hazardous and poisonous material waste of oil and natural gas

European Committee for Standardization (CEN), The hazards of organic waste gas

EN ISO 14123-1:2015 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers
EN ISO 14123-2:2015 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures (ISO 14123-2:2015)
EN 1093-1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
EN 1093-1:1998 Safety of Machinery - Evaluation of the Emission of Airborne Hazardous Substances - Part 1: Selection of Test Methods
EN 1093-4:1996+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method
EN 1093-6:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet
EN 1093-9:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
EN 1093-7:1998+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
EN 1093-11:2001+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index
EN 1093-11:2001 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index (Incorporates Amendment A1: 2008)
EN 1093-2:2006+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
EN 1093-4:1996 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method (Incorporates Amendment A1: 2008)

Lithuanian Standards Office , The hazards of organic waste gas

LST EN 50153-2014 Railway applications - Rolling stock - Protective provisions relating to electrical hazards
LST EN 50153-2003 Railway applications. Rolling stock. Protective provisions relating to electrical hazards
LST EN 1093-11-2002+A1-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index
LST EN 1093-1-2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
LST EN 1093-4-2000+A1-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method
LST EN 1093-2-2007+A1-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
LST EN 1093-7-2000+A1-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
LST EN 1093-9-2000+A1-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
LST EN 1093-6-2000+A1-2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet

European Committee for Electrotechnical Standardization（CENELEC）, The hazards of organic waste gas

EN 60695-5-1:2003 Fire hazard testing Part 5-1: Corrosion damage effects of fire effluent - General guidance

Malaysia Standards, The hazards of organic waste gas

MS 937-1984

Fujian Provincial Standard of the People's Republic of China, The hazards of organic waste gas

DB35/T 1746-2018 Determination of Total Volatile Organic Compounds (TVOC) in Air and Exhaust Gas Freeze Concentration/Gas Chromatography-Mass Spectrometry

KR-KS, The hazards of organic waste gas

KS I ISO TS 24520-2021 Service activities relating to drinking water supply systems and wastewater systems — Crisis management — Good practice for technical aspects

Professional Standard - Commodity Inspection, The hazards of organic waste gas

SN/T 2001.1-2006 Determination of certain hazardous substances in electrical and electronic equipment.Mechanical disjointment.Part 1:General requirements

(U.S.) Ford Automotive Standards, The hazards of organic waste gas

FORD FLTM BZ 157-01-2011 DETERMINATION OF ORGANIC EMISSIONS FROM NON-METALLIC MATERIALS IN VEHICLE INTERIORS BY HEADSPACE GAS CHROMATOGRAPHY

GB-REG, The hazards of organic waste gas

REG NASA-LLIS-6148-2012 Lessons Learned - Continuous Hazardous Gas Monitoring In The Shuttle Aft During Flight

Shandong Provincial Standard of the People's Republic of China, The hazards of organic waste gas

DB37/T 4433-2021 Determination of volatile organic compounds in waste gas from stationary pollution sources Air bag vacuum bottle sampling-gas chromatography mass spectrometry

Danish Standards Foundation, The hazards of organic waste gas

DS/EN 1093-11+A1:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index
DS/EN 1093-1:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
DS/EN 1093-4+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method
DS/EN 1093-2+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
DS/EN 1093-7+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
DS/EN 1093-9+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
DS/EN 1093-6+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet

AENOR, The hazards of organic waste gas

UNE-EN 1093-11:2001+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index
UNE-EN 1093-1:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods
UNE-EN 1093-4:1996+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method
UNE-EN 1093-2:2008+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant
UNE 20672-7-4:1997 FIRE HAZARD TESTING. PART 7: GUIDANCE ON THE MINIMAZATION OF TOXIC HAZARDS DUE TO FIRES INVOLVING ELECTROTECHNICAL PRODUCTS. SECTION 4: UNUSUAL TOXIC EFFECTS IN FIRES.
UNE-EN 1093-9:1999+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method
UNE-EN 1093-7:1999+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet
UNE-EN 1093-6:1999+A1:2008 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet

未注明发布机构, The hazards of organic waste gas

BS ISO/TR 9122-6:1994(1998) Toxicity testing of fire effluents — Part 6 : Guidance for regulators and specifiers on the assessment of toxic hazard in fires in buildings and transport
BS EN 1093-2:2006+A1:2008(2009) Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 2 : Tracer gas method for the measurement of the emission rate of a given pollutant

国家市场监督管理总局、中国国家标准化管理委员会, The hazards of organic waste gas

GB/T 37185-2018 Gas analysis—Determination of indoor harmful volatile organic compounds—"SUMMA canister and silonite tube" and chromatography/mass spectrometry（GC/MS）

VN-TCVN, The hazards of organic waste gas

TCVN 7558-2-2005 Solid waste incinerators.Determination of total concentration of organic compounds in fluegas.Part 2: Turbidity method
TCVN 7558-1-2005 Solid waste incinerators.Determination of total concentration of organic compounds in fluegas.Part 1: Spectrophotometry method

CU-NC, The hazards of organic waste gas

NC 93-02-214-1986 Environmental Safety Standards System. Atmosphere. Harmful Substances Expulsion by Cars Tractors and Self-Propeying Machines for Agriculture and Construction. Terms and Definitions

Hebei Provincial Standard of the People's Republic of China, The hazards of organic waste gas

DB13/T 5189.3-2020 Detection of Hazardous Components in Natural Plant Extracts Part 3: Determination of Residues of 5 Organic Solvents, n-Hexane, Acetone, Ethyl Acetate, Methanol and Ethanol

ZA-SANS, The hazards of organic waste gas

SANS 20040:2005 Uniform provisions concerning the approval of motorcycles equipped with a positive-ignition engine with regard to the emission of gaseous pollutants by the engine