ZH
RU
ES
base peak area
base peak area, Total:79 items.
In the international standard classification, base peak area involves: Lubricants, industrial oils and related products, Products of the textile industry, Vocabularies, Buildings, Iron and steel products, Road engineering, Products of the chemical industry, Raw materials for rubber and plastics, Analytical chemistry, Measurement of volume, mass, density, viscosity, Non-ferrous metals, Plastics, Test conditions and procedures in general, Paper and board, Particle size analysis. Sieving, Non-textile floor coverings, Construction materials, Wastes, Tyres, Soil quality. Pedology, Surface treatment and coating, Ferrous metals.
American Society for Testing and Materials (ASTM), base peak area
- ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
- ASTM D3765-03 Standard Test Method for Carbon Black8212;CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ASTM D3765-03a Standard Test Method for Carbon Black8212;CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ASTM D3765-04 Standard Test Method for Carbon Black-CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ASTM D3765-02 Standard Test Method for Carbon Black—CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ASTM D3765-99 Standard Test Method for Carbon Black-CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ASTM D646-13 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight)
- ASTM D6845-22 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ASTM D6845-20 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ASTM D6845-18 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
- ASTM D646-96(2007) Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
- ASTM D646-96(2001) Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
- ASTM D646-96 Standard Test Method for Grammage of Paper and Paperboard (Mass Per Unit Area)
FI-SFS, base peak area
Standard Association of Australia （SAA）, base peak area
- AS 4878.3:2001 Methods of test for coated fabrics - Determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
German Institute for Standardization, base peak area
- DIN 277-1:2005 Areas and volumes of buildings - Part 1: Terminology, bases of calculation
- DIN EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998); German version EN ISO 2286-2:1
- DIN EN ISO 2286-2:2017-01 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-...
- DIN EN ISO 2286-3:1998 Rubber- or plastic-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:1998); German version EN ISO 2286-3:1998
- DIN EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016); German version EN ISO 2286-2:2
- DIN EN ISO 2286-3:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 3: Method for determination of thickness (ISO 2286-3:2016); German version EN ISO 2286-3:2016
- DIN CEN/TS 17510:2020-12 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption; German version CEN/TS 17510:2020
- DIN CEN/TS 17510:2020 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption; German version CEN/TS 17510:2020
CZ-CSN, base peak area
- CSN 42 6403-1967 Steel drawn wires with circular cross section. Basic dimensions
ES-AENOR, base peak area
Shaanxi Provincial Standard of the People's Republic of China, base peak area
- DB61/T 1428-2021 Technical specification for base construction of cement-stabilized aeolian sand pavement
Professional Standard - Aerospace, base peak area
- QJ 1273.9-1991 Classification and code of capital construction system data element capital construction area
International Organization for Standardization (ISO), base peak area
- ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas
- ISO 2095:1977 Textile floor coverings — Determination of mass of effective pile per unit area that can be shorn away from the substrate
British Standards Institution (BSI), base peak area
- BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
- BS EN ISO 2286-2:1998 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
- BS EN ISO 2286-2:2016 Tracked Changes. Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
- PD CEN/TS 17510:2020 Materials obtained from end-of-life tyres. Determination of the specific surface area of powders. Method based on krypton adsorption
Japanese Industrial Standards Committee (JISC), base peak area
- JIS K 6217-7:2008 Carbon black for rubber industry -- Fundamental characteristics -- Part 7: Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
- JIS K 6217-7:2013 Carbon black for rubber industry -- Fundamental characteristics -- Part 7: Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
- JIS K 6217-3:2001 Carbon black for rubber industry -- Fundamental characteristics -- Part 3: Determination of specific surface area -- CTAB adsorption methods
- JIS K 6217-2:2001 Carbon black for rubber industry -- Fundamental characteristics -- Part 2: Determination of specific surface area -- Nitrogen adsorption methods -- Single-point procedures
- JIS K 6217-2:2017 Carbon black for rubber industry -- Fundamental characteristics -- Part 2: Determination of specific surface area -- Nitrogen adsorption methods -- Single-point procedures
Danish Standards Foundation, base peak area
- DS/EN ISO 2286-2:1999 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of the total mass per unit area, mass per unit area of coating and mass per unit area of substrate
Korean Agency for Technology and Standards (KATS), base peak area
- KS M ISO 2286-2-2017(2022) Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of subs
国家市场监督管理总局、中国国家标准化管理委员会, base peak area
- GB/T 41073-2021 Surface chemical analysis—Electron spectroscopies—Minimum reporting requirements for peak fitting in X-ray photoelectron spectroscopy
- GB/Z 38062-2019 Nanotechnologies—Determination of specific surface area of graphene materials—Methylene blue adsorption method
ZA-SANS, base peak area
- SANS 6005:2005 Mass per unit area of effective pile above the substrate of textile floor coverings
IN-BIS, base peak area
Lithuanian Standards Office , base peak area
- LST EN ISO 2286-2:2000 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:1998)
- LST CEN/TS 17510-2020 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption
AENOR, base peak area
- UNE-EN ISO 2286-2:2017 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, base peak area
- GB/T 14634.6-2002 Test methods of rare earth three-band phosphors for fluorescent lamps-Determination of specific surface area
- GB/T 14634.6-2010 Test methods of rare earth three-band phosphors for fluorescent lamps.Part 6:Determination of specific surface area
- GB/T 24514-2009 Zinc and/or aluminium based coatings on steel.Determination of coating mass per unit area and chemical composition.Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
VN-TCVN, base peak area
- TCVN 7837-2-2007 Rubber.or plastics-coated fabrics.Determination of roll characteristics.Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
European Committee for Standardization (CEN), base peak area
- EN ISO 2286-2:2016 Rubber- or plastics-coated fabrics - Determination of roll characteristics - Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate (ISO 2286-2:2016)
- EN ISO 2286-2:1998 Rubber- or Plastics-Coated Fabrics - Determination of Roll Characteristics - Part 2: Methods for Determination of Total Mass Per Unit Area, Mass Per Unit Area of Coating and Mass Per Unit Area of Substrate ISO 2286-2:1998
SE-SIS, base peak area
- SIS SS 83 25 16-1982 Carpets - Determination of mass of effective pile per unit area that can be shorn away from the substrate
Group Standards of the People's Republic of China, base peak area
- T/JCMS 0007-2022 Determination of the ultimate aerobic biodegradability of polylactic acid biodegradable materials under controlled composting conditions —Method by calculating the peak area of terahertz wide spectrum
- T/BSPT 001-2018 Micro/nanofabrication Large-area Surface Three-dimensional Micro/nanostructure Fabrication Method Based on Laser-induced Strain
Shandong Provincial Standard of the People's Republic of China, base peak area
- DB37/T 3446-2018 Technical regulations for large-area intelligent monitoring of wheat population growth based on UAV
YU-JUS, base peak area
- JUS Z.M0.505-1991 Packaging - Position areas for shipping packages, derived from the position areas 800 mm x 1200mm and 1000mm x 1200mm
Association Francaise de Normalisation, base peak area
- NF X11-622:1977 Determination of the area per unit mass of powders (specific surface) by means of gas adsorption. Various readings of the basic method.
- NF EN ISO 10352:2020 Plastiques renforcés de fibres - Mélanges à mouler et préimprégnés - Détermination de la masse surfacique et de la masse des fibres par unité de surface
- XP T47-769*XP CEN/TS 17510:2020 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorptionX
- NF EN ISO 2106:2020 Anodisation de l'aluminium et de ses alliages - Détermination de la masse surfacique (masse par unité de superficie) des couches d'oxydation anodique - Méthode gravimétrique
- XP CEN/TS 17510:2020 Matériaux produits à partir de pneus usagés non réutilisables - Détermination de la surface spécifique des poudrettes - Méthode fondée sur l'adsorption de krypton
RU-GOST R, base peak area
- GOST R ISO 16962-2012 Zinc and/or aluminium based coatings on steel. Determination of coating thickness, chemical composition and mass per unit area byglow discharge atomic emission spectrometry method
- GOST EN 1849-1-2011 Roofing and hydraulic-insulating flexible bitumen-based materials. Methods for determination of thickness and mass per unit area
- GOST R ISO 17925-2012 Zinc and/or aluminium based coatings on steel. Determination of chemical composition and coating mass per unit area. Gravimetry, atomic emission spectrometry with inductively coupled plasma and flame atomic absorption spectrometry methods
- GOST EN 1849-2-2011 Roofing and hydraulic-insulating flexible polymeric (thermoplastic or elastomer) materials. Methods for determination of thickness and mass per unit area
AT-ON, base peak area
- ONR CEN/TS 17510-2021 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption
IT-UNI, base peak area
- UNI CEN/TS 17510-2021 Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption
ES-UNE, base peak area
- UNE-CEN/TS 17510:2020 Materials obtained from End-of-Life Tyres - Determination of the specific surface area of powders - Method based on krypton adsorption (Endorsed by Asociación Española de Normalización in December of 2020.)
PK-PSQCA, base peak area
- PS 118-1960 PAKISTAN STANDARD SPECIFICATION FOR DETERMINING THE IRREGULARITY OF YARN BY VARIABILITIES OF 1-INCH WEIGHTS
Inner Mongolia Provincial Standard of the People's Republic of China, base peak area
- DB15/T 2469-2021 Grading rules for judging soil water erosion modulus based on gully length and watershed area in the loess hilly area of western Inner Mongolia