ZH
RU
ES

Out-of-time validation set

Out-of-time validation set, Total:115 items.

In the international standard classification, Out-of-time validation set involves: Plastics, Water quality, Characteristics and design of machines, apparatus, equipment, Construction materials, Electronic tubes, Insulating materials, Fluid storage devices, Semiconductor devices, Electrical and electronic testing, Electrical engineering in general, Sterilization and disinfection, Products of the chemical industry, Industrial automation systems, Electric traction equipment, Electricity. Magnetism. Electrical and magnetic measurements, Protective equipment, Metrology and measurement in general, Industrial trucks, Adhesives, Railway rolling stock, Test conditions and procedures in general, Applications of information technology, Electrical equipment for working in special conditions, Measurement of time, velocity, acceleration, angular velocity, Radiation measurements.

British Standards Institution (BSI), Out-of-time validation set

PD ISO/TS 5667-25:2022 Water quality. Sampling. Guideline on the validation of the storage time of water samples
BS ISO 22183:2023 Plastics. Validation of force-time curves obtained from high-speed tensile tests
22/30427884 DC BS ISO 22183. Plastics. Validation of force-time curve of tensile testing at high speed
BS ISO 23945-1:2022 Test methods for sprayed concrete - Flash setting accelerating admixtures. Setting time
BS EN 1744-6:2006 Tests for chemical properties of aggregates - Determination of the influence of recycled aggregate extract on the initial setting time of cement
BS EN 1744-6:2007 Tests for chemical properties of aggregates - Determination of the influence of recycled aggregate extract on the initial setting time of cement
21/30393476 DC BS ISO 23945-1. Test methods for sprayed concrete.. Part 1. Flash setting accelerating admixtures. Setting time
20/30329920 DC BS EN ISO 11138-8. Sterilization of health care products. Biological indicators. Part 8. Method for validation of a reduced incubation time for a biological indicator
PD ISO/TS 11796:2023 Biological evaluation of medical devices. Requirements for interlaboratory studies to demonstrate the applicability of validated in vitro methods to assess the skin sensitization of medical devices
BS ISO 10896-5:2015 Rough-terrain trucks. Safety requirements and verification. Interface between rough-terrain truck and integrated personnel work platform
BS EN 15416-5:2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time
BS ISO 16300-3:2017 Automation systems and integration. Interoperability of capability units for manufacturing application solutions. Verification and validation of interoperability among capability units

International Organization for Standardization (ISO), Out-of-time validation set

ISO 22183:2023 Plastics — Validation of force-time curves obtained from high-speed tensile tests
ISO/TS 5667-25:2022 Water quality — Sampling — Part 25: Guideline on the validation of the storage time of water samples
ISO 11755:1996 Cylinders in bundles for permanent and liquefiable gases (excluding acetylene) - Inspection at time of filling
ISO 23945-1:2022 Test methods for sprayed concrete — Part 1: Flash setting accelerating admixtures — Setting time
ISO 11755:2005 Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling
ISO 16300-3:2017 Automation systems and integration - Interoperability of capability units for manufacturing application solutions - Part 3: Verification and validation of interoperability among capability units
ISO/TS 11796:2023 Biological evaluation of medical devices — Requirements for interlaboratory studies to demonstrate the applicability of validated in vitro methods to assess the skin sensitization of medical devices
ISO 11138-8:2021 Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator
ISO 10896-5:2015 Rough-terrain trucks - Safety requirements and verification - Part 5: Interface between rough-terrain truck and integrated personnel work platform

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Out-of-time validation set

ASHRAE 4644-2003 Experimental Validation of Design Cooling Load Procedures: The Radiant Time Series Method
ASHRAE LO-09-027-2009 Required Duration For Borehole Test Validated by Field Data
ASHRAE AT-01-8-4-2001 Field Validation of a Short Time Step Model for Vertical Ground-Loop Heat Exchangers

GM Global, Out-of-time validation set

GMW 15243-2013 Structural Durability Time - History Data Validation Guidelines Issue 2; English

Group Standards of the People's Republic of China, Out-of-time validation set

T/CIS 03001.1-2020 Reliability of instrument or equipment--Verification and test method of the mean time between failures of complete machine
T/CCAS 020-2021 Specification for verification and comprehensive evaluation of cement setting time automatic tester
T/SHRH 024-2019 Eye irritation test of cosmetics-In vitro reconstructed cornea model-Time to toxicity test method（ET50）

VE-FONDONORMA, Out-of-time validation set

NORVEN 554-1971

RU-GOST R, Out-of-time validation set

GOST 17639-1972 Kinescopes for black-and-white television receivers. Test method for guaranted operating time
GOST 8.619-2013 State system for ensuring the uniformity of measurements. Testing equipment for determination of breakthrough time for respiratory protective devices gas filters. Verification method
GOST 8.098-1973 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring electric intensity within frequency range 0,15-30 mnz
GOST 30852.2-2002 Electrical apparatus for explosive gas atmospheres. Part 1. Construction and verification test of flameproof enclosures of electrical apparatus. First supplement. Appendix D. Method of test for ascertainment of maximum experimental safe gap
GOST 8.540-2015 State system for ensuring the uniformity of measurements. State verification scheme for means of measuring the impulse electric and magnetic fields strengths with the pulse rise time over the range 0,1-10,0 ns
GOST 8.476-1982 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring linear accelerometers in the range of frequencies from 0.5 to 30Hz
GOST 8.102-1973 State system for ensuring the uniformity of measurements. The state standard and all-union verification schedule for instruments measuring power of electromagnetic oscillations in waveguides within frequency range from 37,5 up to 53,57 GHz
GOST 8.037-1981 State system for ensuring the uniformity of measurements. State primary standard and state verifications schedule for noise power spectral density measuring instruments within the frequency range fro 1,0 up to 37,5 ghz

Association Francaise de Normalisation, Out-of-time validation set

NF C26-936/A1:1983 Méthodes d'essai des vernis isolants - Vérification du temps de séchage à l'air des vernis isolants en couche mince.
NF C26-936:1965 Méthodes d'essai des vernis isolants - Vérification du temps de séchage à l'air des vernis isolants en couche mince.
XP CEN/TS 17329-2:2019 Denrées alimentaires - Lignes directrices générales pour la validation des méthodes de PCR qualitative en temps réel - Partie 2 : étude interlaboratoires
NF P18-660-6*NF EN 1744-6:2007 Tests for chemical properties of aggregates - Part 6 : determination of the influence of recycled aggregate extract on the initial setting time of cement
NF EN 480-2:2006 Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 2 : détermination du temps de prise
NF S98-004-8*NF EN ISO 11138-8:2021 Sterilization of health care products - Biological indicators - Part 8 : method for validation of a reduced incubation time for a biological indicator
NF EN ISO 11138-8:2021 Stérilisation des produits de santé - Indicateurs biologiques - Partie 8 : méthode pour la validation d'un temps d'incubation réduit pour un indicateur biologique
NF EN 50318/A1:2022 Applications ferroviaires - Systèmes de captage de courant - Validation des simulations de l'interaction dynamique entre le pantographe et la caténaire
NF EN 50318:2018 Applications ferroviaires - Systèmes de captage de courant - Validation des simulations de l'interaction dynamique entre le pantographe et la caténaire
NF EN 50317:2013 Applications ferroviaires - Systèmes de captage de courant - Prescriptions et validation des mesures de l'interaction dynamique entre le pantographe et la caténaire
NF F21-318*NF EN 50318:2018 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line
NF F21-318/A1*NF EN 50318/A1:2022 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line
NF T76-336-4*NF EN 15416-4:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4 : determination of open assembly time under referenced conditions
NF T76-336-5*NF EN 15416-5:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5 : determination of minimum pressing time under referenced conditions
NF EN 15416-5:2017 Adhésifs pour structures portantes en bois de type autre que phénolique et aminoplaste - Méthodes d'essais - Partie 5 : détermination du temps de pressage minimal dans des conditions de référence

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Out-of-time validation set

GJB 5384.20-2005 Test methods of performance for pyrotechnic composition Part 20: Determination of infrared screening time Infrared thermal imaging sets method
GJB 6238.10-2008 Test method fo effect for special serial bomb. Part 10: Filed burning time for marker flare of aerial marker bomb

Military Standard of the People's Republic of China-General Armament Department, Out-of-time validation set

GJB 8684.20-2015 Pyrotechnic performance test methods Part 20: Determination of infrared shielding time Infrared thermal imaging camera method
GJB 8706.10-2015 Special aviation bomb effect test method Part 10: Field burning time of aviation marking bomb marking torch

US-CFR-file, Out-of-time validation set

CFR 15-30.8-2013 Commerce and foreign trade. Part30:Foreign trade regulations. Section30.8:Time and place for presenting proof of filing citations, and exemption and exclusions legends.
CFR 15-30.8-2014 Commerce and foreign trade. Part30:Foreign trade regulations. Section30.8:Time and place for presenting proof of filing citations, and exemption and exclusions legends.
CFR 17-17.02-2013 Commodity and Securities Exchanges. Part17:Reports by reporting markets, futures commission merchants,clearing members,and foreign brokers. Section17.02:Form,manner and time of filing reports.

European Committee for Standardization (CEN), Out-of-time validation set

EN ISO 11755:2020 Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 11755:2005)
EN 1744-6:2006 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement
EN ISO 11138-8:2021 Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator (ISO 11138-8:2021)
EN 15416-5:2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time
EN 15416-4:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions
EN 15416-5:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions

Taiwan Provincial Standard of the People's Republic of China, Out-of-time validation set

CNS 7012-1981 Method of Test for the Collector-Base Time Constant and for the Resistive Part of the Common-Emitter Input Impedance
CNS 14952-3-2-2005 Guide for the determination of thermal endurance properties of electrical insulating materials ? Part 3: Instructions for calculating thermal endurance characteristics ? section 2: the calculation for incomplete data ? verification for test result f

American Society for Testing and Materials (ASTM), Out-of-time validation set

ASTM C953-06 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM F1260M-96 Standard Test Method for Estimating Electromigration Median Time-To-Failure and Sigma of Integrated Circuit Metallizations [Metric]
ASTM F1260M-96(2003) Standard Test Method for Estimating Electromigration Median Time-to-Failure and Sigma of Integrated Circuit Metallizations [Metric]

Korean Agency for Technology and Standards (KATS), Out-of-time validation set

KS B ISO 11755:2005 Cylinders in bundles for permanent and liquefiable gases(excluding acetylene)-Inspection at time of filling
KS B ISO 11755:2013 Cylinders in bundles for permanent and liquefiable gases(excluding acetylene)－Inspection at time of filling
KS C IEC 60216-3-2-2002(2012) Guide for the determination of thermal endurance properties of electrical insulating materials－Part 3：Instructions for the calculating thermal endurance characteristics－Section 2：Calcuations for incom

GOSTR, Out-of-time validation set

GOST R 8.750-2011 State system for ensuring the uniformity of measurements. State verification schedule for coordinate-temporal measurements means

German Institute for Standardization, Out-of-time validation set

DIN EN 1744-6:2006 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement; English version of DIN EN 1744-6:2006-12
DIN EN 480-2:2006-11 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time; German version EN 480-2:2006
DIN EN ISO 11138-8:2021-11 Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator (ISO 11138-8:2021); German version EN ISO 11138-8:2021
DIN EN 50317/A2 Berichtigung 2:2010 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line; German version EN 50317:2002/A2:2007, Corrigendum to DIN EN 50317/A2 (VDE 0115-503
DIN EN 15416-5:2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time; English version of DIN EN 15416-5:2006-10
DIN EN ISO 11138-8:2021 Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator (ISO 11138-8:2021); German version EN ISO 11138-8:2021
DIN 19242-8:1987 Measurement and control; performance tests on process computer systems; time measurement; function tested: I/O operation on a peripherical storage system (random access)
DIN EN 15416-5:2017-05 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions; German version EN 15416-5:2017

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Out-of-time validation set

GB 5080.7-1986 The verification test plan of failure rate and mean time between failures under the assumption of constant failure rate in equipment reliability test
GB/T 5080.7-1986 Equipment reliability testing--Compliance test plans for failure rate and mean time between failures assuming constant failure rate

Lithuanian Standards Office , Out-of-time validation set

LST EN 480-2-2007 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time
LST EN ISO 11138-8:2021 Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator (ISO 11138-8:2021)
LST EN 50317-2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
LST EN 15416-5-2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time
LST EN 15416-4-2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time for one component polyurethane adhesives

AENOR, Out-of-time validation set

UNE-EN 480-2:2007 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time
UNE-EN 50318:2003 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line.
UNE-EN 50317:2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
UNE-EN 15416-5:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions
UNE-EN 15416-4:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions

Danish Standards Foundation, Out-of-time validation set

DS/EN 480-2:2006 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time
DS/ISO 11138-8:2021 Sterilization of health care products – Biological indicators – Part 8: Method for validation of a reduced incubation time for a biological indicator
DS/EN ISO 11138-8:2021 Sterilization of health care products – Biological indicators – Part 8: Method for validation of a reduced incubation time for a biological indicator (ISO 11138-8:2021)
DS/EN 50318:2003 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line
DS/EN 50317:2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
DS/EN 15416-5:2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of conventional pressing time
DS/EN 15416-4:2006 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time for one component polyurethane adhesives

未注明发布机构, Out-of-time validation set

DIN EN 480-2:1997 Admixtures for concrete, mortar and grout — Test methods — Part 2: Determination of setting time
BS EN 50318:2018 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line

ES-UNE, Out-of-time validation set

UNE-EN ISO 11138-8:2022 Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator (ISO 11138-8:2021)
UNE-EN 50318:2018/A1:2022 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line (Endorsed by Asociación Española de Normalización in April of 2022.)
UNE-EN 50318:2018 Railway applications - Current collection systems - Validation of simulation of the dynamic interaction between pantograph and overhead contact line (Endorsed by Asociación Española de Normalización in January of 2019.)
UNE-EN 50317:2012/A1:2022 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line

International Electrotechnical Commission (IEC), Out-of-time validation set

IEC 60605-7:1978 Equipment reliability testing. Part 7 : Compliance test plans for failure rate and mean time between failures assuming constant failure rate
IEC 62846:2016 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line

AT-ON, Out-of-time validation set

OENORM EN ISO 11138-8:2021 Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator (ISO 11138-8:2021)

CH-SNV, Out-of-time validation set

SN EN ISO 11138-8:2021 Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator (ISO 11138-8:2021)

European Committee for Electrotechnical Standardization（CENELEC）, Out-of-time validation set

EN 50317:2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
EN 50317:2012/AC:2012 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line

CENELEC - European Committee for Electrotechnical Standardization, Out-of-time validation set

EN 50317:2002 Railway applications - Current collection systems -Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line

AT-OVE/ON, Out-of-time validation set

OVE EN 50317/A1-2021 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line (Amendment) (english version)